Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 723 of 727  Not logged in ELOG logo
ID Date Icon Author Author Email Category OS ELOG Version Subject
  78   Tue Jul 23 09:12:14 2002 Reply Stefan Rittstefan.ritt@psi.chComment  Re: Port specification with -p fails (SOLVED, more or less)
> > Anyone seen similar problems? 
> Probably not if you read the config file, 'cause I didn't. Shame on me...
> 
> But what this shows (Stefan: correct me if I'm wrong) is that if you set 
> the port number in the [global] section of the config file, the command-line
> option '-p' is ignored. FYI...
> 
> Joeri

I changed that behaviour, so from 2.0.5 on the command line port setting has 
precedence over the configuration file (as it should be).
  77   Wed Jul 17 23:46:01 2002 Question d. nettlesdnettle@lsu.eduQuestion  inserting pictures into a post
does elog have a way of inserting pictures into a post other than including
them as an attachment? i can put a picture in using html text, but this
method only works if the picture is stored on the local server. anyone
placing a post from a remote machine cannot include a picture off of their
machine.
any help?
thanks.
  76   Wed Jul 17 14:53:18 2002 Reply Stefan Rittstefan.ritt@psi.chBug report  Re: Reverse sort, threaded display fails when there is only 1 entry in logbook
> 
> 
> This is not a serious bug...but when the global settings are as follows
> 
> [global]
> Display mode = threaded
> Reverse sort = 1
> 
> all logbooks with only a single entry produce the wrong URL on 
> clicking "last 10"
> 
> The URL produced is http://localhost:8080/LogbookName/0
> instead of http://localhost:8080/LogbookName/1
> 
> Ravi

This question has been answered in elog:55 .
  75   Tue Jul 16 15:19:08 2002 Question WootenEWootene@gao.govQuestion  change the Email From address used when sending notifications
Is there a way to change the From address used when sending notifications 
from ELOG?   I was hoping there might be another attribute that would go 
along with the smtp host section.

Thanks,
Eric
  74   Mon Jul 15 15:05:22 2002 Idea Joeri Mastopjoeri.mastop@knmi.nlComment  Re: Port specification with -p fails (SOLVED, more or less)
> Anyone seen similar problems? 
Probably not if you read the config file, 'cause I didn't. Shame on me...

But what this shows (Stefan: correct me if I'm wrong) is that if you set 
the port number in the [global] section of the config file, the command-line
option '-p' is ignored. FYI...

Joeri
  73   Mon Jul 15 14:09:30 2002 Warning Joeri Mastopjoeri.mastop@knmi.nlBug report  Port specification with -p fails under RedHat Linux (2.0.4-1)
Hello,

I noticed a strange behaviour with Elog 2.0.4 (i386 RPM) in Linux (RH 7.2). 
I started Elog out-of-the-box with portnumber 888 ('sbin/elogd -p 888').

It runs just fine, but appears to listen to port 8080, the default! It 
looks like the -p option on the command-line is ignored.

Anyone seen similar problems? 

Joeri
  72   Sun Jul 14 15:15:19 2002 Warning Ravi Pappupappu@media.mit.eduBug report  Reverse sort, threaded display fails when there is only 1 entry in logbook

This is not a serious bug...but when the global settings are as follows

[global]
Display mode = threaded
Reverse sort = 1

all logbooks with only a single entry produce the wrong URL on 
clicking "last 10"

The URL produced is http://localhost:8080/LogbookName/0
instead of http://localhost:8080/LogbookName/1

Ravi
  71   Fri Jul 12 10:26:40 2002 Reply Stefan Rittstefan.ritt@psi.chBug fix  Re: last x link TEXT
> The last x link TEXT now shows up like this
> 
>    'Last 20 entries?mode=threaded'
> 
> I can not reproduce this with the elogdemo logbook, however.

...because it has been fixed in meantime (revision 2.41). I have not made a 
new release since I want to fix the elog password submission first. In 
meantime, you can get the actual version from 

http://midas.psi.ch/cgi-bin/cvsweb/elog/elogd.c
ELOG V3.1.4-80633ba