Re: restrict edit time, posted by Andreas Luedeke on Thu Aug 15 13:34:23 2019
|
Yes, I agree that cleaning up old Draft entries and correcting/deleting old entries is a job for the administrator. Currently I do what you've said:
commenting out "restrict edit time", changing the entry, commenting in "restrict edit time".
There are already some commands specifically for the admin: |
|
Re: Cannot submit due to authentification errors, posted by Andreas Luedeke on Sat Aug 17 22:23:34 2019
|
If you post the [global] part of your configuration, it would help a little bit to understand the problem.
Cheers, Andreas
Informatica |
|
Re: Drag and drop does not work in 3.1.3?, posted by Andreas Luedeke on Tue Aug 20 17:03:57 2019
|
> Btw. do you plan to properly accept pasting of images?
I would claim it is already properly supported. If you hit a size limit you can configure your ELOG to adjust the limit (Max content
length). |
|
Re: Cannot submit due to authentification errors, posted by Andreas Luedeke on Wed Aug 28 17:59:17 2019
|
Sorry, but I would think that this is a question for the IT department of your institute, not for the ELOG forum.
Since you have an institute email address (infoval@aemet.es NOT xxx@gmail.com), you certainly have your own mail server, or am I wrong?
Cheers, Andreas |
|
Re: How to export and import all the threat from old elog server to the new elog server , posted by Andreas Luedeke on Wed Oct 9 12:09:19 2019
|
See https://elog.psi.ch/elog/config.html#mirroring
and
https://elog.psi.ch/elog/userguide.html#access |
Re: Email boolean , posted by Andreas Luedeke on Wed Oct 9 12:39:45 2019
|
> > Hello Elog forum
> >
> > Is it possible to email boolean statements, like if a checkbox is checked to email certain people?
|
|
Re: Edit of multiple posts, posted by Andreas Luedeke on Tue Oct 15 10:37:29 2019
|
I use editing of multiple entries frequently and it works fine for me.
To understand your problem I would suggest that you try a minimal configuration. If you have a test logbook with just one or two fields and it
still does not work, then post the config here that people can reproduce your problem - and hopefully find a fix. |
|
Re: Edit of multiple posts, posted by Andreas Luedeke on Fri Oct 18 08:50:27 2019
|
Hi Finn,
I don't know if this was intended, but at least I know a possible solution: with the command
"Show
Attributes Edit = "
you can limit the attribute list shown in the edit form to those that are not |