Re: Edit of multiple posts, posted by Andreas Luedeke on Fri Oct 18 08:50:27 2019
|
Hi Finn,
I don't know if this was intended, but at least I know a possible solution: with the command
"Show Attributes Edit = "
you can limit the attribute list shown in the edit form to those that are not Locked.
I haven't tried, but I guess that should work.
Cheers
Andreas
| Finn Junker wrote: |
|
Hello Andreas
OK, I did install a version of ELOG with a minimum of settings and the edit of multiple settings works fine. I've tracked the issue to "Locked Attributes = Bruger".
If one or more of the attributes are locked i get the error "Error: Attribute option - keep original values - not existing". I'm not trying to change the locked attribute, but it seems when one is locked multiple editing is not possible.
Is that intended to work this way?
Kind Regards Finn
| Andreas Luedeke wrote: |
|
I use editing of multiple entries frequently and it works fine for me.
To understand your problem I would suggest that you try a minimal configuration. If you have a test logbook with just one or two fields and it still does not work, then post the config here that people can reproduce your problem - and hopefully find a fix.
Cheers, Andreas
| Finn Junker wrote: |
|
Hello Elog Forum
There is i ELOG the function to edit multiple posts eg. to change the staus from "ongoing" to "finished" -> in danish translation "igangværende" and "afsluttet", see the attached pictures.
When I select multiple post and want to edit them to status "afsluttet" i get the "udklip_2.jpg" entry form and change only the status to "afsluttet" (Finished)
The result is a error informing that the attribut "gem oprindelige værdier" does not exist. As a test i changed the text in the translation file from "Keep origianl values = gem oprindelige værdier" to "Keep origianl values = Keep origianl values" but the result is the same error: Attribut Keep original values does not exist.
Is there a solution to this or is or is mutiple editing of post not allowed?
Kind Regards Finn
|
|
|
|
|
Re: Edit of multiple posts, posted by Andreas Luedeke on Fri Oct 18 23:22:50 2019
|
I'm sorry, apparently my tip was not clear: you should use "Show Attributes Edit = " to NOT SHOW any of your locked attributes.
It is just a guess: if the attribute is not shown in your edit form, it will not complain about it when you submit the form.
Did you try that?
Cheers, Andreas
| Finn Junker wrote: |
|
Hello Andreas
Show Attributes Edit = xxx, limits the attributes shown when editing but when you submit you get the error
Error: Attribute Bruger not supplied.
Please go back and enter the Bruger field.
If I save instead of submitting it looks like it does change the attribute as intented in my test Elog system. Unfortunately i've disabled save with "Save drafts = 0" in my live system - to only use submit, and enabling drafts only causes other issues. My configuration is attached
Kind Regards Finn
| Andreas Luedeke wrote: |
|
Hi Finn,
I don't know if this was intended, but at least I know a possible solution: with the command
"Show Attributes Edit = "
you can limit the attribute list shown in the edit form to those that are not Locked.
I haven't tried, but I guess that should work.
Cheers
Andreas
| Finn Junker wrote: |
|
Hello Andreas
OK, I did install a version of ELOG with a minimum of settings and the edit of multiple settings works fine. I've tracked the issue to "Locked Attributes = Bruger".
If one or more of the attributes are locked i get the error "Error: Attribute option - keep original values - not existing". I'm not trying to change the locked attribute, but it seems when one is locked multiple editing is not possible.
Is that intended to work this way?
Kind Regards Finn
| Andreas Luedeke wrote: |
|
I use editing of multiple entries frequently and it works fine for me.
To understand your problem I would suggest that you try a minimal configuration. If you have a test logbook with just one or two fields and it still does not work, then post the config here that people can reproduce your problem - and hopefully find a fix.
Cheers, Andreas
| Finn Junker wrote: |
|
Hello Elog Forum
There is i ELOG the function to edit multiple posts eg. to change the staus from "ongoing" to "finished" -> in danish translation "igangværende" and "afsluttet", see the attached pictures.
When I select multiple post and want to edit them to status "afsluttet" i get the "udklip_2.jpg" entry form and change only the status to "afsluttet" (Finished)
The result is a error informing that the attribut "gem oprindelige værdier" does not exist. As a test i changed the text in the translation file from "Keep origianl values = gem oprindelige værdier" to "Keep origianl values = Keep origianl values" but the result is the same error: Attribut Keep original values does not exist.
Is there a solution to this or is or is mutiple editing of post not allowed?
Kind Regards Finn
|
|
|
|
|
|
|
Re: ELOG reverts to demo configuration, posted by Andreas Luedeke on Fri Feb 21 19:11:12 2020
|
If you've upgraded from an elog 2.x version to an 3.x version, then all entries of a logbook will be moved into subfolder, one for each year.
If you then switch back to the 2.x version of elog, it'll not find any entries.
You can move them back to the folder for the logbook (one directory up) and they'll be found again after the next restart of elog.
Cheers, Andreas
| VUIIS SysAdmin wrote: |
|
I have been using elog for over 10 years. Suddenly my elog installation has changed (probably from a recent update. My /etc/elogd.cfg has changed to the original demo configuration. Even after changing it to my configuration from backup none of the entries for the logbooks apper even though the tabs for the logboos are ther all logbooks are empty. I have looced at the logbook files and the entries seem to be there but are not showing on the web interface. Has something changed? Is there a new location for the logbooks and other files? Is there a change from the 32-bit to the 64-bit version that will cause this. I am running CentOS 7 fully patched and updated. Will there be a CentOS 8 compatible version?
|
|
|
Re: change Cell Style, posted by Andreas Luedeke on Tue Jun 30 17:12:10 2020
|
You should edit the CSS style file: /usr/local/elog/themes/default/elog.css
Just change all fields "background-color:" to your desired color; e.g. "#FFFFFF" for white.
| Lahreche Abdelmadjid wrote: |
|
Hi All,
I hope to change the Cell Style backround color into background point.
because my color printer don't work.
can some one give me the code to do that.
Regards.
|
|
|
Re: Update, posted by Andreas Luedeke on Tue Jun 30 17:15:18 2020
|
When you update from a version 2.* to a version 3.* then all elog entry files will be moved in subfolder for each year. But non of the entries are lost.
Only if you afterwards try to start an old version 2.* with the newly converted data directories, then the old version will not find any of the entries.
I've updated the ELOG version many times now. The only data I once lost was a modified CSS style file and a "hand modified" configuration of the ckeditor.
| Lahreche Abdelmadjid wrote: |
|
Hi,
How to do the last update with out losing any data ?
Regards
|
|
|
Re: Search feature in ELOG, posted by Andreas Luedeke on Mon Aug 3 13:25:50 2020
|
That question screams: please read the manual! Find command: https://elog.psi.ch/elog/userguide.html#browse
Some simple examples:
https://elog.psi.ch/elogs/Forum/?mode=threaded&reverse=0&reverse=1&npp=20&Subject=Search
https://elog.psi.ch/elogs/Forum/?mode=summary&reverse=0&reverse=1&npp=8&Subject=category
| Illam Pakkirisamy wrote: |
|
Hi,
Is there a search feature in ELOG. Basically, we have the topics broken up by categories but within the categories we would like to search by a key word based on the subject to get to a specific topic.
Thanks.
Illam
|
|
|
Re: Reverse sort by Attribue, but it's only showing the last 6 entries by default., posted by Andreas Luedeke on Sun Aug 9 20:47:05 2020
|
It is described in the manual at https://elog.psi.ch/elog/config.html#general
Entries per page = <number>
Funnily the default is "20". I have no idea why you see 6 entries.
| Anthony wrote: |
|
Hi,
I'm trying to use the Sort Attributes option to sort all entries by a user specified date. The issue I'm running into, is that although I can get it to work, it seems to only display the last 6 entries that I'm sorting by. If I click "All" to show all the entries, it's sorted perfectly. I'm using:
Sort Attributes = Due Date
Reverse sort = 0
Is there something I'm missing to get this working. Reading through the manual nothing jumped out at me.
|
|
|
Re: do some changes on .CFG, posted by Andreas Luedeke on Mon Aug 17 13:27:09 2020
|
This has nothing to do with the ELOG package, but only with your local configuration of that specific logbook.
You should contact your local ELOG administrator.
Or you might want to rephrase you question: do you want to have this text added in the text field when selecting the field specifier?
How that can be done depends on your specific configuration. Since you are apparently already using a form in the text field, it might be tricky.
| Lahreche Abdelmadjid wrote: |
|
Hi All,
I would like to have "Permis de verouillage et d'étiquetage 016685-68AF-0031" when I select it.
I don't found where can I make this change
thank you.
|
|