Re: Drag and drop does not work in 3.1.3?, posted by Andreas Luedeke on Tue Aug 20 17:03:57 2019
|
> Btw. do you plan to properly accept pasting of images?
I would claim it is already properly supported. If you hit a size limit you can configure your ELOG to adjust the limit (Max content
length). |
|
Re: Cannot submit due to authentification errors, posted by Andreas Luedeke on Wed Aug 28 17:59:17 2019
|
Sorry, but I would think that this is a question for the IT department of your institute, not for the ELOG forum.
Since you have an institute email address (infoval@aemet.es NOT xxx@gmail.com), you certainly have your own mail server, or am I wrong?
Cheers, Andreas |
|
Re: How to export and import all the threat from old elog server to the new elog server , posted by Andreas Luedeke on Wed Oct 9 12:09:19 2019
|
See https://elog.psi.ch/elog/config.html#mirroring
and
https://elog.psi.ch/elog/userguide.html#access |
Re: Email boolean , posted by Andreas Luedeke on Wed Oct 9 12:39:45 2019
|
> > Hello Elog forum
> >
> > Is it possible to email boolean statements, like if a checkbox is checked to email certain people?
|
|
Re: Edit of multiple posts, posted by Andreas Luedeke on Tue Oct 15 10:37:29 2019
|
I use editing of multiple entries frequently and it works fine for me.
To understand your problem I would suggest that you try a minimal configuration. If you have a test logbook with just one or two fields and it
still does not work, then post the config here that people can reproduce your problem - and hopefully find a fix. |
|
Re: Edit of multiple posts, posted by Andreas Luedeke on Fri Oct 18 08:50:27 2019
|
Hi Finn,
I don't know if this was intended, but at least I know a possible solution: with the command
"Show
Attributes Edit = "
you can limit the attribute list shown in the edit form to those that are not |
|
Re: Edit of multiple posts, posted by Andreas Luedeke on Fri Oct 18 23:22:50 2019
|
I'm sorry, apparently my tip was not clear: you should use "Show Attributes Edit = " to NOT SHOW any of your locked attributes.
It
is just a guess: if the attribute is not shown in your edit form, it will not complain about it when you submit the form.
Did you try that?
Cheers,
Andreas
Finn |
|
Re: ELOG reverts to demo configuration, posted by Andreas Luedeke on Fri Feb 21 19:11:12 2020
|
If you've upgraded from an elog 2.x version to an 3.x version, then all entries of a logbook will be moved into subfolder, one for each year.
If you then switch back to the 2.x version of elog, it'll not find any entries.
You can move them back to the folder for the logbook (one directory up) and they'll be found again after the next restart of elog. |