This may be due to how I have my config file setup

Example:

Attributes = A, B
Options B = Please Select A
Options A = One{1}, Two{2}
{1} Options B = 1, 2,
{2} Options B = 3, 4,
 

Uppon closer inspection, removing the option to preset the secondary attribute as a Option list dosn't do anything for the find page.

This:

Attributes = A, B
Options A = One{1}, Two{2}
{1} Options B = 1, 2
{2} Options B = 3, 4

Still fails to set attribute B to a option list on  the find page. 

Use Email Heading = <string>

Use Email Subject = <string>

Use Email Subject = ELOG $logbook entry; $Category: $Subject

Use Email Heading = A new entry has been submitted by $long_name on $remote_host on $date

Hi

I want to display an image on the title page and have put the following code into the elogd.cfg:

Welcome Title = <img src="pictures/ln2.jpg"><p><font size = 5 color=white>Welcome to My Project Log</font>

I have put the picture "ln2.jpg" in a pictures folder I have created in the root ELOG directory however the image does not show up. Any assistance would be great :)

Thanks in advance

Adam

While it is possible to print a logbook using the standard web browser print command in the Full or Summary view, a dedicated print function allowing the user to print out a hardcopy of a particular logbook would be very helpful.

Cheers

Adam

P.S. Thankyou for the response in elog:65671

Hi

I was just wondering if there was a way that the comments for a logbook could be set to be invisible on the Selection page but then displayed once a user has logged in to a particular logbook?

This is required for security purposes. I want a common login page which shows all logbooks, where the logbook names only have meaning for people who know them but then once logged in the comment provides additional information about that logbook.

Thanks

Adam

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam