This problem has been fixed in revision 1.462

> Somehow elogd 2.5.4 treat all users as normal user. When clicking on
> "config". All admin users has no "change elogd.cfg" button. Revert back to
> 2.5.2 OK.
> 
> Is there anything I need to change to upgrade other than replaceing elogd?
> Clearing the cookies didn't help.

The button name has been changed from "change elogd.cfg" to "change config file"
since the file name is now variable (can be changed during compile time). But I
guess this is not your problem.

Can you try with the demo logbook (contained in the distribution). Just add
"password file = ..." and "admin user = ..." to the sample elogd.cfg. If I do that
here, everything works fine. You also can send me your elogd.cfg so I can have a look.

> Newly installed elog gives this response when I try to submit a new record:
> 
> New entry cannot be written to directory "./logbooks/Linux/" 
> Please check that it exists and elogd has write access
> 
> I started the daemon.  I've not yet assigned passwords -- just checking
> things out.  How can I create this access to my own directory?

First, find out under which account the daemon is running. It you account if
you start it interactively, if you installed from the RPM, an account "elog" is
created. Then make sure that the account under which elogd is running has write
access to the ./logbooks/Linux/ directory. One common problem is that people
start the daemon the first time under their account, which causes elogd to
create the logbook directory under the user name. If elogd is later started
under the account "elog" this one of course does not have access to the
directory. A

chown -R elog.elog /usr/local/elog/

issued as root could help in that case. Please replace /usr/local/elog with the
directory where elog is installed.

That bug has been fixed recently, please update to the newest version.

One possibility is to use the option "Restrict edit time = <hours>". This way
an entry can only be edited let's say 8 hours after it has been created.

Another way is to maintain two logbooks, a "scratch" logbook and an "archive"
logbook. Users would put their entries into the scratch logbook, the staff
would examine it and move them to the archive logbook, where all users only
have read access to. To move entries between logbooks, you have to put the
"Move to" command in the configuration file like:

Menu commands = Back, New, Edit, Delete, Reply, Find, Move to, Config, Help

> At some point, in the last week or so, I upgraded the debian-unstable
> version (r1459-1) of elog.  Now, PostScript files (as attachments) are
> displayed (shown in ascii text, instead of just showing the link).  
> 
> Is there an option in the elog.cfg to only display certain files (like .gif
> or .jpg).

See elog:691 . In the latest CVS version, postscript files are not displayed
any more inline, but the next debian release will take some time, maybe you can
compile from source...

> elogd does not exit if there is an 'unprocessed' HUP.  So when you do 
> 
> kill -HUP <pid>
> kill <pid> 
> 
> elogd will only exit after it was accessed.

Can you please tell me how to reproduce this problem?

Even if I do a

kill -HUP <pid>; kill <pid>

it works immediately when I start elogd manually in interactive mode (not as daemon).

> > elogd does not exit if there is an 'unprocessed' HUP.  So when you do 
> > 
> > kill -HUP <pid>
> > kill <pid> 
> > 
> > elogd will only exit after it was accessed.
> 
> Can you please tell me how to reproduce this problem?
> 
> Even if I do a
> 
> kill -HUP <pid>; kill <pid>
> 
> it works immediately when I start elogd manually in interactive mode (not as daemon).

Even though I can't test this right now, I assume you have to wait a little
so that elogd jumps out of the 'select()' statement between the kill
commands.  Try: 

kill -HUP <pid>; sleep 2; kill <pid>

(I think the 'select()' timeout was 1 second.?)