Re: elogd Service exited with abnormal code: 1, posted by Stefan Ritt on Wed May 1 10:59:59 2019
|
Ok, that helped. It looks to me that the strlcpy() function from MacOSC does not like overlapping stings as parameters. Funny that this does not happen on my Mac (Mojave 10.14.4). I fixed the two cases you reported (lines 18712 and 19021) and committed the changes to bitbucket, from where you can pull and test it again (see https://elog.psi.ch/elog/download.html for instructions). If it happens again, please report the line number in elogd.c like here (where it is 19021:7):
frame #8: 0x000000010006a7ac elogd`build_ref(ref="page6?&sort=Subject", size=256, mode="full", expand="", attach="", new_entries="") at elogd.c:19021:7
Good luck!
Stefan |
|
Re: elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Thu May 2 09:47:41 2019
|
Thanks a lot for providing a quick fix!
The elog is now happily running since two days without problems :)
I will get back to you in case anything else shows up.
Thanks a lot again.
| Stefan Ritt wrote: |
|
Ok, that helped. It looks to me that the strlcpy() function from MacOSC does not like overlapping stings as parameters. Funny that this does not happen on my Mac (Mojave 10.14.4). I fixed the two cases you reported (lines 18712 and 19021) and committed the changes to bitbucket, from where you can pull and test it again (see https://elog.psi.ch/elog/download.html for instructions). If it happens again, please report the line number in elogd.c like here (where it is 19021:7):
frame #8: 0x000000010006a7ac elogd`build_ref(ref="page6?&sort=Subject", size=256, mode="full", expand="", attach="", new_entries="") at elogd.c:19021:7
Good luck!
Stefan
|
|
How to pre-fill an attribute that was added later, posted by Antonio Bulgheroni on Tue May 21 11:57:50 2019
|
Dear all,
I have a question about my logbook. I have recently added a new attribute to my logbook and I would like to prefill all previous entries with a fixed value for this field. Is it possible?
Thanks for your help and best regards,
toto |
|
Re: How to pre-fill an attribute that was added later, posted by Stefan Ritt on Tue May 21 12:08:17 2019
|
Find all entries which have this attribute empty. Then click on Select, then select all, then click on Edit, then change all values. There might be a limit how many entries you can select in one go, so you might have to do it in bunches.
| Antonio Bulgheroni wrote: |
|
Dear all,
I have a question about my logbook. I have recently added a new attribute to my logbook and I would like to prefill all previous entries with a fixed value for this field. Is it possible?
Thanks for your help and best regards,
toto
|
|
|
Re: How to pre-fill an attribute that was added later, posted by Antonio Bulgheroni on Tue May 21 12:51:08 2019
|
Thanks, it worked great!
| Stefan Ritt wrote: |
|
Find all entries which have this attribute empty. Then click on Select, then select all, then click on Edit, then change all values. There might be a limit how many entries you can select in one go, so you might have to do it in bunches.
| Antonio Bulgheroni wrote: |
|
Dear all,
I have a question about my logbook. I have recently added a new attribute to my logbook and I would like to prefill all previous entries with a fixed value for this field. Is it possible?
Thanks for your help and best regards,
toto
|
|
|
|
Write by a .dll instead of the elog.exe, posted by Marcel Krenz on Tue May 21 15:05:25 2019
|
Dear All,
is it possible to write to the elog instead of the Command line throug a .dll
Best
MK |
|
Re: Write by a .dll instead of the elog.exe, posted by Stefan Ritt on Tue May 21 17:20:19 2019
|
I presume you want to write from another program. You can call a command line shell (done via the "system()" command under C) which then calls the elog executable. If you absolutely want a DLL, you can einter try to compile one yourself using the fuctions in elog.c, or use the curl DLL with which you can also submit elog entries. See elog:68597 for usage of curl. While curl is usually executed from the command line, there is also a curl library containing the same functionality. See https://curl.haxx.se/windows/
| Marcel Krenz wrote: |
|
Dear All,
is it possible to write to the elog instead of the Command line throug a .dll
Best
MK
|
|
Find cannot find values with brackets, posted by Sebastian Schenk on Fri Jun 14 11:29:30 2019
|
For demonstration, I created https://elog.psi.ch/elogs/Linux+Demo/8
The Find search for category aaa(bb) does not give results.
A quick filter corrects the value to aaa\(bb) and delivers results.
I made a simple fix and submitted it as PR to the bitbucket repository. |