| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
68279
|
Thu Mar 10 00:26:03 2016 |
 | Dave | david.levine@lmco.com | Question | Windows | 2.71 | elogd -m Error sending local entry: Error transmitting message |
I'm running ELOG on a seperate Windows Servers.
When I try to synchronize the logbooks using "elogd -m", I get an "Error sending local entry: Error transmitting message"
If I click on the "Synchronize" link in the logbook, it can correctly send entry to remote ELOG.
Can anyone tell me why I get this error?
==============================
Here is the command & output:
c:\Program Files (x86)\ELOG>elogd -m
Retrieving entries from "http://166.22.64.201/Equipment Log"...
All entries identical
Retrieving entries from "http://166.22.64.201/System Log"...
Error sending local entry: Error transmitting message |
|
Draft
|
Thu Mar 10 00:16:33 2016 |
| Dave | david.levine@lmco.com | Question | Windows | 2.71 | elogd -m |
I'm running ELOG on a seperate Windows Servers.
When I try to synchronize the logbooks using "elogd -m", I get an "Error sending local entry: Error transmitting message"
If I click on the "Synchronize" link in the logbook, it can correctly send entry to remote ELOG.
Can anyone tell me why I get this error?
==============================
Here is the command & output:
c:\Program Files (x86)\ELOG>elogd -m
Retrieving entries from "http://166.22.64.201/Equipment Log"...
All entries identical
Retrieving entries from "http://166.22.64.201/System Log"...
Error sending local entry: Error transmitting message |
|
68277
|
Tue Mar 8 14:12:26 2016 |
 | Andreas Luedeke | andreas.luedeke@psi.ch | Bug report | Linux | 3.1.1 | Re: Execute new|edit doesn't seem to work |
| Juergen Diefenbach wrote: |
| Andreas Luedeke wrote: | I'm just guessing, but you could try to disable the "save drafts" feature and see if the behaviour changes:
Save drafts = 0
If that is the case then Stefan will know where to look 
Cheers
Andreas |
Alright, I tried "Save drafts = 0" in the config file and now it seems to work all the time as expected!
Thank you, Andreas!
In principle I could live with this as I don't think I need to have drafts enabled.
Cheers,
Jürgen |
I would speculate that "Execute new" is not executed, when a draft is saved (as one would expect, since it's only a draft), but is neither executed when a draft is submitted (not as one would expect).
Good that you're fine for the moment.
If you could add a minimal configuration to reproduce the problem, then Stefan would have it easier to debug it. |
|
68276
|
Mon Mar 7 13:03:13 2016 |
| Juergen Diefenbach | diefenba@uni-mainz.de | Bug report | Linux | 3.1.1 | Re: Execute new|edit doesn't seem to work |
| Andreas Luedeke wrote: | I'm just guessing, but you could try to disable the "save drafts" feature and see if the behaviour changes:
Save drafts = 0
If that is the case then Stefan will know where to look
Cheers
Andreas |
Alright, I tried "Save drafts = 0" in the config file and now it seems to work all the time as expected!
Thank you, Andreas!
In principle I could live with this as I don't think I need to have drafts enabled.
Cheers,
Jürgen |
|
68275
|
Thu Mar 3 14:51:55 2016 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Question | Windows | 2.9.2 | Re: Attribute Field Size Limited to 255 Characters |
No. At least there is no simple method.
You would need to edit the source code and recompile elogd. But the number 256 is used for about 300 times in the source code, you'll have a hard time finding the right one to increase.
Cheers, Andreas
| Mike Bodine wrote: |
|
I currently have an Attribute defined in my .cfg file as "Format <Attribute> = 0, attribname, attribvalue, 120, 500". I've found if I exceed 255 characters elogd.exe fails. Is there a method that will allow me to exceed 255 characters?
|
|
|
68274
|
Thu Mar 3 00:12:45 2016 |
| Mike Bodine | Mike.Bodine@alcatel-lucent.com | Question | Windows | 2.9.2 | Attribute Field Size Limited to 255 Characters |
I currently have an Attribute defined in my .cfg file as "Format <Attribute> = 0, attribname, attribvalue, 120, 500". I've found if I exceed 255 characters elogd.exe fails. Is there a method that will allow me to exceed 255 characters? |
|
Draft
|
Thu Mar 3 00:02:26 2016 |
| Mike Bodine | Mike.Bodine@alcatel-lucent.com | Question | Windows | 2.9.2 | Attribute Field Size Limited to 255 Characters |
I currently have an Attribute defined in my .cfg file as "Format <Attribute> = 0, attribname, attribvalue, 120, 500". I've found if I exceed 255 characters elogd.exe fails. Is there a method that will allow me to exceed 255 characters? |
|
68272
|
Sun Feb 28 18:24:58 2016 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Bug report | Linux | 3.1.1 | Re: Execute new|edit doesn't seem to work |
| Juergen Diefenbach wrote: | I am trying to use the "Execute new|edit|delete" feature to track changes to an elog using git.
[...]
However, I experienced unreproducible behavior when creating "new" entries. Sometimes the command specified by "Execute new=" is called, sometimes the one specified by "Execute edit=" is executed. Most of the time it doesn't work as expected. 
[...]
Do you have an idea how to fix this or can you point me in some direction to further track it down? Thank you! |
I'm just guessing, but you could try to disable the "save drafts" feature and see if the behaviour changes:
Save drafts = 0
If that is the case then Stefan will know where to look
Cheers
Andreas |