> Hi,
> 
> is there a documentation for the elconv tool available?
> 
> Regards,
> 
> Stefan

I have asked Fred Pacquier who maintains the web pages to put something on, 
but he hasn't replied.

Basically you simply run "elconv" in the directory where all the *.log files 
live. The only option is the "-v" flag for verbose output. If you have 
several directories with log files, you run it once in each directory.

This has nothing to do with the ELOG package, but only with your local configuration of that specific logbook.
You should contact your local ELOG administrator.

Or you might want to rephrase you question: do you want to have this text added in the text field when selecting the field specifier?
How that can be done depends on your specific configuration. Since you are apparently already using a form in the text field, it might be tricky.

Thanks, but I'm the Admin of local ELOG.

usually I can make a lot of changes on my files .CFG But this time no way.

when I select one of the choice i've a text who appear with the right text (code), but only with this choice "Permis de verouillage et d'étiquetage 016685-68AF-0031"

the text appeared is false.

How are we supposed to give you a hint when you don't post your configuration?

That's strange. I use the C function localtime() to obtain the local time from Windows. The documentation says that this function checks the Windows control panel  and returns the proper local time. So far, nobody complained so I guess only you have this problem (anybody else to correct me???). The only hint I found is to set the environment variable TZ. So open a DOS box and enter

set TZ=AST+10

then start elogd.exe interactively in that dos box and see if you get something else.

 I did as instructed but time was 20 hours behide

I have entered    set TZ=AST-10   I got the correct time. I think my elog files have been changed by someone. elogd file is running in DOS box now. Please help how to run elog as normal or correct elog files. Which file I should check. Is it elconv.c file? Thank you Stefan.

You have to change your environment variable "TZ" system wide.  You do that by going to 

My Computer/Properties/Advanced/Environment Variables/New

then you enter TZ as the variable name and AST-10 as the value. You might have to reboot your computer.

 It is working with the correct time stamp now. Thanks you very much Stefan.