Re: How to get Elog server to produce web server log files in Linux., posted by Stefan Ritt on Wed Oct 16 09:48:56 2019
|
Have you tried
Logfile = ...
Logging level = 3 |
|
Re: Edit of multiple posts, posted by Finn Junker on Thu Oct 17 14:57:25 2019
|
Hello Andreas
OK, I did install a version of ELOG with a minimum of settings and the edit of multiple settings works fine. I've tracked the issue to "Locked
Attributes = Bruger". |
|
Re: How to get Elog server to produce web server log files in Linux., posted by John on Thu Oct 17 21:29:25 2019
|
Hi again everyone; a Sebastian suggested I use a reverse proxy to complete my need to have logs show up when someone 'lands' on my first entry
page. I see that Elog will only start recording logs when someone has actually started to do some work.. like login, read a post, etc... but NOT when they
first enter the login page or 'listings' pages. I have tried fowarding from my router (both lighty and Apache) but so for no good. I will also |
|
Re: Edit of multiple posts, posted by Andreas Luedeke on Fri Oct 18 08:50:27 2019
|
Hi Finn,
I don't know if this was intended, but at least I know a possible solution: with the command
"Show
Attributes Edit = "
you can limit the attribute list shown in the edit form to those that are not |
Re: Edit of multiple posts, posted by Finn Junker on Fri Oct 18 09:40:54 2019 
|
Hello Andreas
Show Attributes Edit = xxx, limits the attributes shown when editing but when you submit you get the error
Error: Attribute Bruger not supplied. |
|
Re: Edit of multiple posts, posted by Andreas Luedeke on Fri Oct 18 23:22:50 2019
|
I'm sorry, apparently my tip was not clear: you should use "Show Attributes Edit = " to NOT SHOW any of your locked attributes.
It
is just a guess: if the attribute is not shown in your edit form, it will not complain about it when you submit the form.
Did you try that?
Cheers,
Andreas
Finn |
|
Re: Edit of multiple posts, posted by Finn Junker on Mon Oct 21 10:46:43 2019
|
Hello Andres
Or maybe my reply was unclear :-), but i did use the "Show Attributes Edit" the way you meant to not show attribute BRUGER
and when i do that i get: |
|
Re: How to get Elog server to produce web server log files in Linux., posted by Sebastian Schenk on Mon Oct 21 13:41:08 2019
|
Hi,
that Sebastian would be me. I replied to the first entry, as it was a draft (site reloaded incorretly...) and now I can't see the post anywhere.
But this is off topic. |