Re: Extendable options, posted by Marc Neiger on Tue May 11 19:35:11 2004
|
> > The snapshot version you sent me seems to be locked onto port 80 and does not honor
> > the port directive in elog.cfg....
>
> Thank you, I fixed that and updated the file.
Tested and working, thx. |
Re: Announcement of RSS feeds, posted by Marc Neiger on Thu Nov 11 01:04:01 2004
|
Great, but what's the corresponding URL for the RSS feed itself
> I implemented experimentally RSS feeds into Elog. Before releasing this new
> addition, I would like to collect some experience with it. This forum now
> supports RSS feeds, for which you can subscribe with a RSS feed reader like
> Mozilla Firefox. Please give it a try and send me any feedback.
>
> For an introduction to RSS feeds, please see
>
> http://www.webreference.com/authoring/languages/xml/rss/intro/ |
Re: Announcement of RSS feeds, posted by Marc Neiger on Mon Nov 15 09:54:45 2004
|
IE 6 chokes on the XML, below is what I get for
http://midas.psi.ch/elogs/Forum/elog.rdf
(sorry this is in french).
So I assume all rss reader parsing the file with the MS XML parser shall also
have a problem, this is the case with Avant Browser integrated RSS reader.
Cheer,
Marc
------------------------------------------------------
La page XML ne peut pas être affichée
Impossible d'afficher l'entrée XML en utilisant la feuille de style XSL.
Corrigez l'erreur, puis cliquez sur le bouton Actualiser ou réessayez
ultérieurement.
--------------------------------------------------------------------------------
Un caractère incorrect a été trouvé dans un contenu de texte. Erreur de
traitement de la ressource http://midas.psi.ch/elog...
<title>Re: $message id gives wrong value - Gernman traslalation of Back, posted
by Ulrich Tr |
Re: Announcement of RSS feeds, posted by Marc Neiger on Mon Nov 15 13:10:12 2004 
|
Hi Stefan,
The parsing now seems OK, IE downloads the XML and the RSS reader of Avant
Browser
accepts the feed.
I still have a problem however : below the header, only the first 3 items
are displayed and it seems only partially.
I included the HTML result so you can "visualize" what's going on (this may
also be on the avant browser side !).
Cheers,
Marc
> The problems came from the French accents and the German umlauts. I
changed the XML
> charset, so this should be fine now. New version is under CVS. |
|
export the entries from ELOG to ECSS Word document (Manifacturing Report), posted by Manuela Rigano on Tue Jul 25 17:50:16 2023
|
HI,
Is there a way to export the ELOG entries to a file like Microsoft Word?
For ECSS-type documents for space missions, I have to report the data that we enter in the ELOG in a Manufacturing Report, foreseen for ECSS, in word format. It's possible to do it?
The data has to go into tables, inserted in the world file, called "as run procedure".
Is it possible to connect the elog to a report template so that it automatically generates the manufacturing report? Or link the tables placed in it so that they are automatically filled in?
Thank you so much
Manuela |
|
Re: export the entries from ELOG to ECSS Word document (Manifacturing Report), posted by Manuela Rigano on Wed Jul 26 11:41:40 2023
|
Thanks a lot Stefan,
I asked if it is possible, in general, to create a connection and automatically fill in the tables of a report, or export the data into excell tables to then be connected to the report, having in our case about 24 process tables to be filled in with data or validation, for each report. If the compilation is not automatic, after having compiled the elog in each phase of the processing, the manifacturing report will then have to be compiled manually.
We use elog, having already used it in MEG We must then compulsorily also make manufacturing and test reports. The expected space-type documentation format for these documents is in word.
Below is a small example of a test table, with just a few steps.
Thanks again
Manuela
|
POWER INTERFACE VERIFICATION TEST
|
|
STEP
|
Description
|
Expected Value
|
Measured value
|
Remarks
|
-
|
Power-On Ixxxx
|
|
|
|
-
|
Test communications with ...
|
|
|
|
-
|
Command xxxx to switch-on the value ….V DC/DC
|
|
|
|
-
|
Configure a multimeter to measure voltage
|
|
|
|
-
|
Use the multimeter to check ..V interface. Connect multimeter positive prove to pin x, and negative prove to pin y of yyyy connector
|
Volts: x.xV ≤ ___ ≤ y.yV
|
|
|
-
|
Repeat operation between pins z and q of …
|
Volts: 5. 097V ≤ ______ ≤ 5.252V
|
|
|
-
|
Command xxxx to switch-on the ..V DC/DC
|
|
|
|
-
|
Use the multimeter to check ..V interface. Connect multimeter positive prove to pin xx, and negative prove to pin yy of yyyy connector
|
Volts: x.x V ≤ ______ ≤ y.y V
|
|
|
-
|
Power-Off xxx
|
|
|
|
-
|
Re-connect harness to zzzz through yyyy connector
|
|
|
|
-
|
Power-On xxx
|
|
|
|
-
|
Verify ..V input voltage. Check final voltage
|
Final Volts @ ..V: x.x V ≤ __ ≤ 5y.yV
|
|
|
-
|
Verify ..V power consumption
|
Consumption @ ..V: x.x< _ < y.y W
|
|
|
-
|
|
|
|
|
| Stefan Ritt wrote: |
|
You can just copy-and-paste an elog entry into Word. I tested it here wiht a simple table:
Did a copy-and-paste to Word, and got the thing below.
Best,
Stefan
| Manuela Rigano wrote: |
|
HI,
Is there a way to export the ELOG entries to a file like Microsoft Word?
For ECSS-type documents for space missions, I have to report the data that we enter in the ELOG in a Manufacturing Report, foreseen for ECSS, in word format. It's possible to do it?
The data has to go into tables, inserted in the world file, called "as run procedure".
Is it possible to connect the elog to a report template so that it automatically generates the manufacturing report? Or link the tables placed in it so that they are automatically filled in?
Thank you so much
Manuela
|
|
|
|
How to lock a specific entry?, posted by Manoel Couder on Tue Sep 14 17:48:52 2021
|
Hi All,
I am using elog to track technical changes in an experiment but also to log what experimentalist are doing during an experiment. For the latter, I would like to be able to lock those entries from being further edited after the expertiment if finished. Is there a way to do that?
Thanks,
Manoel |
Kerberos auth not available on 3.0 ?, posted by Maikolk Kein on Mon Jan 26 10:30:40 2015
|
Hi all !!!
i have just updated and 2.9.2-1 elog instance, and i have problems with the kerberos configuration.
I was surprised to see on the logs, that the 3.0 daemon was refusing to start because the system
config has kerberos listed as an authentication method. I saw on the logs that the current daemon
didnt have kerberos support compiled in.
Ive seen that there is ldap support, but couldnt find anything about configuring this auth sytem, does
amnyone have any example i could check ?
Did i have to use a patched version ? or compile it on my own ?
Regards |
|