Hi!

I am not sure if this is a know issue: it seems that the equation editor does not work anymore. Is there any fix or alternative method to type latex formula in the log? 

Thank you!

On a new MacBook Pro (Silicon M3), I installed version 3.1.5 build 23df00d9.  The application appears to work normally, except that, after a short while, the indicated attachment count (paperclips in the attachment column of the Summary view) starts to increment fairly rapidly with each time that I visit the page.  Attachment counts appear even for records that don't have any attachments.  When I access records individually, either those with or without real attachments, everything looks OK.  Any insights as to what might be causing this, and how to correct?

Installation went smoothly using the (now longstanding) MacOS installation instructions, with one small exception: When doing the "sudo launchctl load ..." step, there is occasionally an I/O error of some kind.  (Sorry, I don't have an exact transcript of the error at the moment, but it appears to refer to line 5 of a script.)

Many thanks,

Andreas W.

A quick follow-up concerning the secondary matter I mentioned in my last post, namely the issues I had with the deprecated "sudo launchctl load ..." and "sudo launchctl unload ..." subcommands currently provided in the ELOG installation instructions for MacOS.  I found a solution to this -- will post it in a separate thread.

The strangely auto-incrementing attachment counts in the Summary view are still present, and I'm curious if anyone else has experienced those.  Also, I could not find a way to customize the Summary view such that the final (rightmost) column with the attachment counts can be suppressed.  That would at least put the problem out of sight until a developer can intervene and fix the bug.

The section of the ELOG Administrator's Guide https://elog.psi.ch/elog/adminguide.html describing how to build and install ELOG on a Mac OS X system has worked well for me for several years, even though there have been warnings that the "load" and "unload" subcommands of the "launchctl" command have been deprecated for some time.  After trying my luck again on a new Mac with the latest operating system, I encountered errors of the type "Load failed: 5: Input/output error" when attempting to follow these instructions.

After a bit of searching around, I used information at the page https://www.alansiu.net/2023/11/15/launchctl-new-subcommand-basics-for-macos/ to deploy the more current subcommands as follows:

sudo launchctl enable system/ch.psi.elogd
sudo launchctl bootstrap system /Library/LaunchDaemons/ch.psi.elogd.plist 

sudo launchctl disable system/ch.psi.elogd

Once the above can be verified, perhaps the instructions in the Administrator's Guide can be updated accordingly.

Here's a more complete/correct set of the updated commands:

sudo launchctl enable system/ch.psi.elogd
sudo launchctl bootstrap system /Library/LaunchDaemons/ch.psi.elogd.plist 

sudo launchctl bootout system /Library/LaunchDaemons/ch.psi.elogd.plist
sudo launchctl disable system/ch.psi.elogd

Cheers,
Andreas

Hi Stefan, Thanks a lot for implementing the updated commands. I noted that there are a few typos that could cause people confusion if not fixed:

In one case, "launchctl" is misspelled.

Confusingly, I think the two lines containing the 'enable' and 'disable' commands use the contiguous text string "system/ch.psi.elogd" (no space), whereas the two lines containing the 'bootstrap' and 'bootout' commands use the phrase "system /Library/LaunchDaemons/ch.psi.elogd.plist" (note space after 'system').

Many thanks, Andreas W.