I'm working on setting up an elog as lab-journal in our group with the following set-up:

• The elog is running on a server, with no back-end access for the users.
• Multiple people will use it, all loging in with the same user-name and password.
• The entries submitted to the log-book can only be edited for 24hours, as defined by the "Restrict edit time= 24" setting in the configuration file.

Now I encountered the following problem in my set-up: Entries that do not have attachments can be changed after these 24hours have passed, by the following set-up: If a user (in the current case me during testing) sets up a local elog on his computer and activates the synchronisation with the elog on the server, he can switch off the time-restriction for editing on his local elog, and if he synchronises the two log-books, the changed entry from the local elog will overwrite the original one from the server-elog.

Obviously this is not very desirable. Therefore I wanted to ask, whether anyone sees a possibility to prevent the editing of entries, which are older than the restricted edit time. A specific function or a change in the synchronisation behaviour would of course be the completest solution, but in my case the problem would also be solved if I could just prohibit the synchronisation. It is not needed, so no harm will be done if it is not possible.

Hello everybody,

we had to setup a new server for our elog some time ago because the old one crashed. We are now running version ELOG V3.1.1-0767eb0.

In the previous installation we had these nice buttons for file upload, time stamp and equation editor, which are also available here in the online version.

I already found that in the installation directory ("/usr/local/elog/") there exists a directory "scripts" containing a file "ckeditor-config.js", which also contains the lines:
"config.extraPlugins = 'timestamp,dndfiles,eqneditor,fileupload';" and "{ name: 'insert', items: [ 'Image', 'Table', 'HorizontalRule', 'Smiley', 'SpecialChar', 'PageBreak', 'FileUpload', 'Timestamp', 'EqnEditor' ] },"

These plugins seem to be available in the subdirectory "scripts/ckeditor/plugins/". But why are they not loaded? Is it just a version issue? Or something else?

It would be nice to get a hint.

Best regards,

Roland

I have configured a logbook with the logfile on, but when a user replies to an entry the line logged goes

Date Time [User@IP] {Logbook} NEW entry #0

How can I make the #0 be the real entry number for the reply?

Hi

I am trying to add "Extendable options" for some attribute as below example. However button to add new item for list appears only for the first "Extendable options", if disable the first with (;), button appears for the second. It means elog add new item button only the first line "Extendable options" not for other?

Is this a limitation or bug or am I doing something wrong?

Options Require = N/A, Camera{1}, Lens{2}, Other{3}
{1} MOptions Require Model= XNB-6001, PNM-7000VD, PNM-9000VQ, PNM-9320VQ
{2} MOptions Require Lens = SLA-T2480, SLA-T2480V, SLA-T4680, SLA-T4680V, SLA-T1080F, SLA-2M2400P, SLA-2M2800P, SLA-2M3600P, SLA-2M6000P, SLA-2M1200P, SLA-5M3700P, SLA-5M4600P, SLA-5M7000P, SLA-2M2400Q, SLA-2M2800Q, SLA-2M3600Q, SLA-2M6000Q, SLA-5M3700Q, SLA-5M4600Q, SLA-5M7000Q, SLA-2M2400D, SLA-2M2800D, SLA-2M3600D, SLA-2M6000D
{3} MOptions Require Other = Base Unit

Extendable options = Require Model

Extendable options = Require Lens

Extendable options = Require Other

Thank you

Devrim

I have a setting which makes ELOG a perfect solution, but there's a situation that I'm struggling to get my head around. We have 3 separate laboratories, each one containing a number of temperature chambers, which run almost constantly over a number of shifts. Each temperature chamber has it's own logbook (laptop). So far, pretty simple.
My dilemma is, our network goes down for maintenance/updates (more often than I'd like), but our operation cannot afford to stop during network interruptions.
With that said, I thought about whether I could run a "local" logbook on each laptop/chamber, and somehow mirror the local logbook to the main ELOG server.
Perhaps I'm over-thinking this...do you have any recommendations?

Hi,
  I'm using elog 3.1.3 and I have an elogbook with an attribute with name 
Attributes = Author, CO2 Temp [deg], ...

If I add this attributes to quick list, 
Quick filter = Author, CO2 Temp [deg]

it does display on web page, but the search fails with "ERR_TOO_MANY_REDIRECTS" if I leave the default value in the corresponding quick filter box.

My understanding is that the presence of a "[]" in the default search value is the reason for failure and if I remove them the search works fine.

Is there a workaround?

I don't want to change the attribute name, since I do have quite a large number of entries in the elogbook, and I'd like to keep the attribute in the quick search if possible.

Thanks,
  Stefano

Hello,

I am using Elog v3.1.1. When entries contain embedded images, these images are attached to the email notifications but are not properly displayed in the body of the email.
Is it expected?
For example, with an image file myimage.png the email source code contains <img alt="" height="150" src="190208_143305/myimage.png.png" width="200">
Maybe the email should make use of the Content-ID of the attached image?

I'm having a minor issue that were getting double entries due to the user is using the "submit" button more than once.

I seems like when there is a lag either on the machine or on the network it is possible to tap the "submit" button more than once resulting i a double or triple entry containing the same text and a almost identical timestamp.

Is there a way to aviod this?, my "solution" so far has been to select the entries and manually delete them. I'm using Elog version 3.14

Kind Regards Finn