| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
67552
|
Fri Aug 16 11:54:17 2013 |
 | UlfO | ulf.olsson@dynamate.se | Question | Windows | 2.9.2 | Moving password file |
Hi,
Is it possible to move a passwordfile from one E-log to another E-Log located on a different server without the need for users to register again?
Regards
/UlfO
|
|
65973
|
Sat Sep 13 23:34:37 2008 |
 | Eoin Butler | | Question | Linux | | Moving individual messages in a thread |
It is possible that the Move to... and Copy to... commands can be configured so that when they operate on a message that is part of a thread, that only that message will be moved, instead of the whole thread? |
|
66340
|
Fri May 1 14:01:44 2009 |
| David Pilgram | David.Pilgram@epost.org.uk | Question | Linux | 2.7.6-2191 | Moving entry (and replies) from one log book to another |
Hi Stefan,
When Moving entry (and replies) from one log book to another, is it possible to prevent elog from renumbering
the entries' ID number(s) ($@MID@$). While it may not be good practice, we've referred to these numbers in
cross-referencing, and it all goes wrong when an entry is moved from an "Open" thread to a "Closed" thread (cf
your FAQ about marking of whole threads).
In the cases I'm thinking about, i.e. from main logbook to archive logbook(s), there would never be a clash of
ID number.
Thanks,
David Pilgram. |
|
1190
|
Sat Jun 11 02:29:01 2005 |
| Charles Duncan | Charles@YorkU.CA | Question | Linux | | Moving eLog from Server to Server... |
I am moving my eLog system from one server to another.
I moved all my log books, my /etc/elog.conf, and /usr/share/elog/elog.pwd file. Did I miss anything?
The Logbooks come up fine on the eLog list, but when I try to access them I get invalid user name...
Do I have to do some sort of conversion to move the pwd file from one server to another?
Or should I try using the sync command for the move? does sync also move the pwd file??
-Charles- |
|
65677
|
Mon Dec 17 02:17:20 2007 |
| Val Schmidt | vschmidt@ccom.unh.edu | Question | Mac OSX | 2.6.1 | Moving a logbook from one installation to another |
I've attempted to move a logbook from an old elog installation to a new one on another system. The version of elog is the same (2.6.1) in both. Both systems have the same name and the logbooks are and installation are going in the same place. So all paths are identical. Also, for the new installation, I've simply recompiled the same sources used to install the original one. The only difference is an upgrade in the OS.
I've rsync'd the directory and contents from the old installation to the logbooks/ directory for the new one. I then over-wrote the standard config file with the new one. I then started elogd in the new place.
What I find is
a) The default entry from the demo logbook is inserted into my logbook. This I can live with but it was unexpected.
b) The dates for all my entries as shown in my browser have years starting in 1946, rather than 2006. This is particularly odd since all of the actual log files have the correct dates.
c) The numbering of entries has been reset to 1.
Can anyone explain what I've done to mucky this up and how to fix it?
Thanks in advance,
Val
|
|
66388
|
Wed Jun 10 13:56:09 2009 |
 | David Pilgram | David.Pilgram@epost.org.uk | Other | Linux | 2.7.6-2211 | Move to: elog crashes with large no of entries being moved. |
Hi Stefan,
I've been slowly moving threads, and twice now so far (and reproducably) had elog crash.
In each case, it is trying to move a thread with more than 24 entries; it copies the first 24 entries, then
crashes with "Segmentation Fault". It does not erase the lock file /var/run/elog.pid
I have got around this by manually copying the entries beyond no 24, then deleting the thread entry by entry.
I am aware that I have an old and limited machine (586, 256MB RAM, running Slack 10), and at first I was
"content" to write it off as that; but when it crashed for the second time at exactly the same entry (the
twenty-forth) even though the size of the entries would have been significantly different, I wondered if there
was some factor within elog that could affect this.
I've not tried it with Copy to:, but imagine it will also be affected as the only difference with this and Move
to: is the deletion of the thread after all the entries had been copied. |
|
68344
|
Wed Jun 29 16:07:32 2016 |
| JD | elog@dreessen.it | Request | Linux | Windows | Mac OSX | All | Other | ELOG V3.1.1 | More than 100 attributes |
I am modifying the elogd.cfg automatically with a script. The Script fetches a list of systems from a LDAP database and writes them into an "Options" line in the elog.cfg.
Everything worked fine, until we hit the critical number of 100 attributes. I saw this is also stated in the manual.
Is there any workaround? I downloaded the source code and hat a quit look, but couldn't find the section which is responsible for this behavior.
Is there a reason for this limit?
Thanks
Jonathan |
|
1102
|
Tue Apr 19 22:43:10 2005 |
| Stephen A. Wood | saw@jlab.org | Question | Linux | 1.632 | More questions about groups |
I am running 2.5.8-3 with the elogd.c 1.632. I have attached the config
file that I am using. I have a top group "src", with logbooks "SRC
Analysis" and "SRC Mail" in it. These two logbooks share the same password
file. If one logs into one, I would like them to be not have to login to
the other. If I put the password file name under [global src], I get this
behaviour, but the logbook selection page does not show my graphic or the
locks by the logbook names (instead it has the Alt text "This logbook
requires authentication." If I remove the password from [global src] and
put it in each logbook individually, then my logbook selection page looks
OK, but I have to log into each logbook seperately.
Stephen |