| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
163
|
Thu Nov 21 18:22:58 2002 |
 | tony summerfelt | snowzone25@yahoo.com | | | | Re: upgrading |
> Of course you have to stop the old elogd program and start the new one. Have
> you done that?
on windows i run it as a service through firedaemon, but i stop it before upgrading...that was one of the first things i checked... |
|
164
|
Fri Nov 22 09:11:27 2002 |
| Stefan Ritt | stefan.ritt@psi.ch | | | | Re: upgrading |
> > Of course you have to stop the old elogd program and start the new one.
Have
> > you done that?
>
> on windows i run it as a service through firedaemon, but i stop it before
upgrading...that was one of the first things i checked...
Well, the other thing is that the previous page is till in the cache of
Netscape. You have to hit "Reload" in order to properly update the page.
Besides these two things - browser cache and not stopping the old versoin -
there is no possibility how you could see the old version at the bottom of
the page, I update this very carefully on each distribution. |
|
165
|
Sat Nov 23 09:20:57 2002 |
 | egli | Stephan.Egli@psi.ch | Question | | | Input text gets lost |
Typing in a text for a new entry results in an error message, whenever
one forgets to fill in mandatory attributes (as it should happen !). However
after using the back button in this case (Using netscape 4.79) I made the
experience, that the text typed in gets lost. Other browsers like Mozilla
or IE do not have this problem. Any idea how this problem can be
avoided for netscape as well ? |
|
166
|
Mon Nov 25 09:05:06 2002 |
 | Stefan Ritt | stefan.ritt@psi.ch | | | | Re: upgrading |
Ooops, I just realized that the Windows 2.2.3 distribution contained the old
(2.2.2) executable for elogd.exe. I apologize for that. I have updated the
elog223.exe distribution just now, so please download it again in order to
get the new file.
- Stefan |
|
167
|
Mon Nov 25 18:10:04 2002 |
| Stephan Egli | Stephan.Egli@psi.ch | Request | | | Show all common attributes |
In the "find" command, when searching over all logbooks, it
would be nice to see ALL attributes, which are common for all
logbooks (e.g. typically the author name), not just
logbook name, date and text. |
|
168
|
Tue Nov 26 08:59:28 2002 |
| Stefan Ritt | stefan.ritt@psi.ch | Request | | | Re: Show all common attributes |
> In the "find" command, when searching over all logbooks, it
> would be nice to see ALL attributes, which are common for all
> logbooks (e.g. typically the author name), not just
> logbook name, date and text.
That depends on how you specify what gets displayed in a search (with
the "Display search" option for example). If you try the following link:
http://midas.psi.ch/elogdemo/Forum/?mode=summary&all=1
you see that all attributes are displayed from the three logbooks in this
installation. |
|
169
|
Tue Nov 26 18:04:43 2002 |
| Stephan Egli | Stephan.Egli@psi.ch | Question | | | Re: Show all common attributes |
> > In the "find" command, when searching over all logbooks, it
> > would be nice to see ALL attributes, which are common for all
> > logbooks (e.g. typically the author name), not just
> > logbook name, date and text.
>
> That depends on how you specify what gets displayed in a search (with
> the "Display search" option for example). If you try the following link:
>
> http://midas.psi.ch/elogdemo/Forum/?mode=summary&all=1
>
> you see that all attributes are displayed from the three logbooks in this
> installation.
How does the corresponding elogd.cfg entry look like for the
display search command ? - I can't reproduce this behaviour... |
|
170
|
Wed Nov 27 07:22:07 2002 |
 | tony summerfelt | snowzone25@yahoo.com | | | | Re: upgrading |
> Ooops, I just realized that the Windows 2.2.3 distribution contained the old
> (2.2.2) executable for elogd.exe. I apologize for that. I have updated the
that's ok. i just it was driving me nuts there for a while...everything is fine now...
i've tried other web based msg boards, but i keep coming back to elog... |