> > > In the "find" command, when searching over all logbooks, it
> > > would be nice to see ALL attributes, which are common for all
> > > logbooks (e.g. typically the author name), not just
> > > logbook name, date and text.
> > 
> > That depends on how you specify what gets displayed in a search (with 
> > the "Display search" option for example). If you try the following link:
> > 
> > http://midas.psi.ch/elogdemo/Forum/?mode=summary&all=1
> > 
> > you see that all attributes are displayed from the three logbooks in 
this 
> > installation.
> 
> How does the corresponding elogd.cfg entry look like for the
> display search command ? - I can't reproduce this behaviour...

Ok, finally I can confirm the problem. It will be fixed from Version 2.2.4 
on.

unless i missed these in the docs some place:

1) a threaded display but collapsed threads unstead of all replies showing

2) the subject is the link along with the icon. it would make it a little   easier to click on the message if you run your montior on a high resolution...

Starting from version 2.2.4 which has been released today, the 
option "quick filter" has been added. A "quick filter" is a drop down box 
on the message display page. By selecting a value from the drop down box, 
only messages of that type are displayed. See this forum which uses "Quick 
filter = Date, Category".

This new option adresses a couple of installations which require a large 
number of logbooks. Instead of using many similar logbooks, the old logbook 
name can now be defined as an attribute. All messages get now mixed, but by 
defining the logbook attribute as a quick filter, one can display the 
messages belonging to the individual logbooks separately with a single 
click.

> unless i missed these in the docs some place:
> 
> 1) a threaded display but collapsed threads unstead of all replies showing

This feature has been added in Version 2.2.4 which has been released today. 
Use the "collase" button.
 
> 2) the subject is the link along with the icon. it would make it a little   
easier to click on the message if you run your montior on a high resolution...

This feature has been added in Version 2.2.4 as well. Use "line as link = 1" 
in elogd.cfg

> This feature has been added in Version 2.2.4 which has been released today. 
> Use the "collase" button.

> This feature has been added in Version 2.2.4 as well. Use "line as link = 1" 
> in elogd.cfg

thanks. that was quick :)

i have expand flag set to 0 but it doesn't seem to be working...

i can expand and collapse via the links, or if i make sure the url includes it.

> i have expand flag set to 0 but it doesn't seem to be working...

It workes here flawlessly. Can you double check the spelling etc. If 
everything is ok, can you send me your elogd.cfg for analysis?

- Stefan

> > i have expand flag set to 0 but it doesn't seem to be working...
> 
> It workes here flawlessly. Can you double check the spelling etc. If 
> everything is ok, can you send me your elogd.cfg for analysis?
> 
> - Stefan

I checked your elogd.cfg: The flag is called "Expand default" not "Expand" as 
you had it. With "Expand default = 0" it works fine. Just RTFM...

- Stefan