Hello,

I would like to utilize the "New Entries" button on the quick filter bar, but it dates back to 1969.  Is there a way to customize this or fix it?

I have an issue where not all users are able to log into their sessions and they are still settling on the login page

A new version 3.1.5 of elog has been released with all accumulated fixes over the past actually few years. I made a tar file, a RPM, but I could not compile yet a windows version.

https://elog.psi.ch/elog/download.html

Best,
Stefan

Looking forward to the windows installer. 

Thanks a lot and keep up the good work!

cheers,

toto

Hi Stefan

Is there anything the community or forum can help you with or supply for creating a windows version?

Kind Regards Finn

Hi,

It's possible to build elogd under windows with cygwin, but not sure that is the best as it requires a lot of dependencies that should be included to dist package to be runnable everywhere.

After

• installation of dependencies (gcc-g++, make, libssl1.1, libssl-devel, opendlap-devel, libopenldap2, libkrb5-devel, libkrb5_3) using CygWin setup program,
• instalkation of git tool and clone the git repo (git clone https://bitbucket.org/ritt/elog --recursive),
• modification of Makefile to build with Kerberos/ldap/ssl support,

from cygwin bash under Windows 11, you can build elog :

/cygdrive/d/Devel/elog $ make
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -DHAVE_KRB5 -DHAVE_LDAP -o elog src/elog.cxx mxml.o crypt.o strlcpy.o -lssl -lkrb5 -lldap -llber
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -DHAVE_KRB5 -DHAVE_LDAP -w -c -o auth.o src/auth.cxx
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -DHAVE_KRB5 -DHAVE_LDAP -o elogd src/elogd.cxx auth.o mxml.o crypt.o strlcpy.o -lssl -lkrb5 -lldap -llber
src/elogd.cxx:217:6: warning: ‘_timezone’ redeclared without dllimport attribute: previous dllimport ignored [-Wattributes]
  217 | long _timezone;
      |      ^~~~~~~~~
src/elogd.cxx: In function ‘int el_submit(LOGBOOK*, int, BOOL, const char*, char (*)[1500], char (*)[1500], int, const char*, const char*, const char*, const char*, const char (*)[256], BOOL, const char*, const char*)’:
src/elogd.cxx:4963:47: warning: ‘%s’ directive writing up to 149999 bytes into a region of size between 100103 and 250102 [-Wformat-overflow=]
 4963 |       sprintf(message + strlen(message), "%s: %s\n", attr_name[i], attrib[i]);
      |                                               ^~
src/elogd.cxx:4963:14: note: ‘sprintf’ output between 4 and 300002 bytes into a destination of size 250104
 4963 |       sprintf(message + strlen(message), "%s: %s\n", attr_name[i], attrib[i]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx: In function ‘void show_edit_form(LOGBOOK*, int, BOOL, BOOL, BOOL, BOOL, BOOL, BOOL)’:
src/elogd.cxx:9655:28: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3993 [-Wformat-overflow=]
 9655 |       sprintf(str, "Preset %s", attr_list[index]);
      |                            ^~
src/elogd.cxx:9655:14: note: ‘sprintf’ output between 8 and 150007 bytes into a destination of size 4000
 9655 |       sprintf(str, "Preset %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9676:43: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3978 [-Wformat-overflow=]
 9676 |       sprintf(str, "Preset on first reply %s", attr_list[index]);
      |                                           ^~
src/elogd.cxx:9676:14: note: ‘sprintf’ output between 23 and 150022 bytes into a destination of size 4000
 9676 |       sprintf(str, "Preset on first reply %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9697:37: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                     ^~
src/elogd.cxx:9697:14: note: ‘sprintf’ output between 17 and 150016 bytes into a destination of size 4000
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9697:37: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                     ^~
src/elogd.cxx:9697:14: note: ‘sprintf’ output between 17 and 150016 bytes into a destination of size 4000
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9697:37: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                     ^~
src/elogd.cxx:9697:14: note: ‘sprintf’ output between 17 and 150016 bytes into a destination of size 4000
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9697:37: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                     ^~
src/elogd.cxx:9697:14: note: ‘sprintf’ output between 17 and 150016 bytes into a destination of size 4000
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9717:36: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3985 [-Wformat-overflow=]
 9717 |       sprintf(str, "Preset on edit %s", attr_list[index]);
      |                                    ^~
src/elogd.cxx:9717:14: note: ‘sprintf’ output between 16 and 150015 bytes into a destination of size 4000
 9717 |       sprintf(str, "Preset on edit %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9737:41: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3980 [-Wformat-overflow=]
 9737 |       sprintf(str, "Preset on duplicate %s", attr_list[index]);
      |                                         ^~
src/elogd.cxx:9737:14: note: ‘sprintf’ output between 21 and 150020 bytes into a destination of size 4000
 9737 |       sprintf(str, "Preset on duplicate %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9758:22: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3999 [-Wformat-overflow=]
 9758 |       sprintf(str, "p%s", attr_list[index]);
      |                      ^~
src/elogd.cxx:9758:14: note: ‘sprintf’ output between 2 and 150001 bytes into a destination of size 4000
 9758 |       sprintf(str, "p%s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9776:31: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3993 [-Wformat-overflow=]
 9776 |          sprintf(str, "Preset %s", attr_list[index]);
      |                               ^~
src/elogd.cxx:9776:17: note: ‘sprintf’ output between 8 and 150007 bytes into a destination of size 4000
 9776 |          sprintf(str, "Preset %s", attr_list[index]);
      |          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9797:40: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9797 |          sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                        ^~
src/elogd.cxx:9797:17: note: ‘sprintf’ output between 17 and 150016 bytes into a destination of size 4000
 9797 |          sprintf(str, "Preset on reply %s", attr_list[index]);
      |          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9817:44: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3980 [-Wformat-overflow=]
 9817 |          sprintf(str, "Preset on duplicate %s", attr_list[index]);
      |                                            ^~
src/elogd.cxx:9817:17: note: ‘sprintf’ output between 21 and 150020 bytes into a destination of size 4000
 9817 |          sprintf(str, "Preset on duplicate %s", attr_list[index]);
      |          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx: In function ‘void show_elog_list(LOGBOOK*, int, int, int, BOOL, char*)’:
src/elogd.cxx:20459:43: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1587 [-Wformat-overflow=]
20459 |                sprintf(str, "Icon comment %s", attrib[i]);
      |                                           ^~
src/elogd.cxx:20459:23: note: ‘sprintf’ output between 14 and 150013 bytes into a destination of size 1600
20459 |                sprintf(str, "Icon comment %s", attrib[i]);
      |                ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:20506:33: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1600 [-Wformat-overflow=]
20506 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                                 ^~
src/elogd.cxx:20506:32: note: directive argument in the range [0, 99]
20506 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                                ^~~~~~~
src/elogd.cxx:20506:26: note: ‘sprintf’ output between 3 and 150003 bytes into a destination of size 1600
20506 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                   ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:20470:33: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1600 [-Wformat-overflow=]
20470 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                                 ^~
src/elogd.cxx:20470:32: note: directive argument in the range [0, 99]
20470 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                                ^~~~~~~
src/elogd.cxx:20470:26: note: ‘sprintf’ output between 3 and 150003 bytes into a destination of size 1600
20470 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                   ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:21052:30: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1600 [-Wformat-overflow=]
21052 |                sprintf(str, "%s_%d", attr_list[i], j);
      |                              ^~
src/elogd.cxx:21052:29: note: directive argument in the range [0, 99]
21052 |                sprintf(str, "%s_%d", attr_list[i], j);
      |                             ^~~~~~~
src/elogd.cxx:21052:23: note: ‘sprintf’ output between 3 and 150003 bytes into a destination of size 1600
21052 |                sprintf(str, "%s_%d", attr_list[i], j);
      |                ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:21538:45: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1588 [-Wformat-overflow=]
21538 |                   sprintf(str, "Time format %s", attr_list[i]);
      |                                             ^~
src/elogd.cxx:21538:26: note: ‘sprintf’ output between 13 and 150012 bytes into a destination of size 1600
21538 |                   sprintf(str, "Time format %s", attr_list[i]);
      |                   ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:21523:45: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1588 [-Wformat-overflow=]
21523 |                   sprintf(str, "Date format %s", attr_list[i]);
      |                                             ^~
src/elogd.cxx:21523:26: note: ‘sprintf’ output between 13 and 150012 bytes into a destination of size 1600
21523 |                   sprintf(str, "Date format %s", attr_list[i]);
      |                   ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx: In function ‘void submit_elog(LOGBOOK*)’:
src/elogd.cxx:23293:38: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 2034 [-Wformat-overflow=]
23293 |          sprintf(str, "Subst on edit %s", attr_list[index]);
      |                                      ^~
src/elogd.cxx:23293:17: note: ‘sprintf’ output between 15 and 150014 bytes into a destination of size 2048
23293 |          sprintf(str, "Subst on edit %s", attr_list[index]);
      |          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:23323:39: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 2033 [-Wformat-overflow=]
23323 |          sprintf(str, "Subst on reply %s", attr_list[index]);
      |                                       ^~
src/elogd.cxx:23323:17: note: ‘sprintf’ output between 16 and 150015 bytes into a destination of size 2048
23323 |          sprintf(str, "Subst on reply %s", attr_list[index]);
      |          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -DHAVE_KRB5 -DHAVE_LDAP -o elconv src/elconv.cxx -lssl -lkrb5 -lldap -llber

Copy to new dir :

• the 3 binaries(elogd.exe, elog.exe & elconv.exe)
• logbooks, scripts, ssl and themes folders from git clone.
• elogd.cfg.example as elogd.cfg.

/cygdrive/d/Devel/elog/elog-win64 $ ldd elogd.exe
        ntdll.dll => /cygdrive/c/WINDOWS/SYSTEM32/ntdll.dll (0x7ff9796b0000)
        KERNEL32.DLL => /cygdrive/c/WINDOWS/System32/KERNEL32.DLL (0x7ff978050000)
        KERNELBASE.dll => /cygdrive/c/WINDOWS/System32/KERNELBASE.dll (0x7ff976af0000)
        cygwin1.dll => /usr/bin/cygwin1.dll (0x7ff925010000)
        cygkrb5-3.dll => /usr/bin/cygkrb5-3.dll (0x3fe4b0000)
        cygldap-2.dll => /usr/bin/cygldap-2.dll (0x3fdf70000)
        cyglber-2.dll => /usr/bin/cyglber-2.dll (0x3fe030000)
        cygssl-1.1.dll => /usr/bin/cygssl-1.1.dll (0x3ff4d0000)
        cygstdc++-6.dll => /usr/bin/cygstdc++-6.dll (0x3ff2f0000)
        cyggcc_s-seh-1.dll => /usr/bin/cyggcc_s-seh-1.dll (0x3ffc30000)
        cygk5crypto-3.dll => /usr/bin/cygk5crypto-3.dll (0x3fe600000)
        cygkrb5support-0.dll => /usr/bin/cygkrb5support-0.dll (0x3fe490000)
        cygintl-8.dll => /usr/bin/cygintl-8.dll (0x3ffa10000)
        cygcom_err-2.dll => /usr/bin/cygcom_err-2.dll (0x3fe9b0000)
        cygcrypto-1.1.dll => /usr/bin/cygcrypto-1.1.dll (0x3ffce0000)
        cygsasl2-3.dll => /usr/bin/cygsasl2-3.dll (0x3fdee0000)
        cygiconv-2.dll => /usr/bin/cygiconv-2.dll (0x3ffa30000)
        cygz.dll => /usr/bin/cygz.dll (0x3ff280000)

/cygdrive/d/Devel/elog/elog-win64 $ ls
elconv.exe  elog.exe  elogd.cfg  elogd.exe  logbooks  scripts  ssl  themes
 

/cygdrive/d/Devel/elog/elog-win64 $ ./elogd.exe
elogd 3.1.5 built Apr 12 2023, 00:01:15 revision 33884104
CKeditor detected
ImageMagick NOT detected. Image scaling will not work.
Indexing logbooks ... done
Server listening on port 8080 ...

With that, elogd starts and the site is usable.

NB: after installing imageMagick, elogd starts with activation of image manipulation features.

/cygdrive/d/Devel/elog/elog-win64 $ ./elogd.exe
elogd 3.1.5 built Apr 12 2023, 00:01:15 revision 33884104
CKeditor detected
ImageMagick detected
Indexing logbooks ... done
Server listening on port 8080 ...

For who as interested, I enclosed 2 zips, with (elog-win64_wDLL.zip) or without (elog-win64.zip) Cygwin DLL (licence: https://cygwin.com/COPYING). The build uses the current git version.

Regards,

Laurent

Hi Laurent

It is possible to use the attached but the elogd will not start as a service anymore - is there a fix to that aswell?

Kind Regards Finn

Hello,

After enabling SSL=1 in /usr/loca/elog/elogd.cfg file, HTML editor loading very long. 

After changing SSL to 0, everything work flawlessly.

Does anyone know what can cause this behaviour?

Best Regards
Daniel

Hello,

I created new certificate, but it doesn't help with resolving this problem.

Does someone have and idea how to resolve it?

Best Regards

Daniel

Hello,

I found that someone else had the same issue - https://dev.ckeditor.com/ticket/10874#no1

In Firefox I do not have problems, but in Chrome and Edge i have. 

His solution was:

My problem is solved. The .htaccess file sents any request to the login page. Therefore CKEditor could not reach the CSS file. Thanks for helping!

Sinse I don't use apache webserver, I don't know what should I do. 

It looks that also in my case problem is with file progressjs.min.css (please look at attached screenshot)

Anyone have solution for this?

Best Regards

Daniel

We obtained a certificate from let's encrypt in order to replace the self signed certificate provided with elog. We copied the new certificates replacing the older server.crt

The problem is that when restarted elog raises an error related to the fact it is looking for server.crt and it doesn't find it anymore.

I searched in elog config file in order to find a way to indicate the new certificate but I didn't find how to manage this issue.

Any suggestion?

Hi Giuseppe,

The new certificate files should be copy under ssl folder (/usr/local/elog/ssl or /usr/share/elog/ssl by example, closed to templates and script directories) in place of the embedded (autosigned) certificate files enclosed with ELOG source.

It seems that there is no parameter to set a custom path.

SSL = <0 | 1>
Turn on Secure Socket Layer transport. If SSL is on, one can connect via https://... to the elogd daemon. If the URL = directive is used, make sure to use https://... instead of http://... there. The ELOG distribution contains a simple self-signed certificate in the ssl subdirectory. One can replace this certificate and key with a real ceritficate to avoid browser pop-up windows warning about the self-signed certificate. The default for this option is 0.

Hi Laurent,

thanks very much! Probably I've copied the certificate in the wrong directory. I'll try ASAP

Hi I'm here again,

According to my conf file I run elog under a specified user and group different from root. So I copied the .pem file I obtained from certbot in /etc/ssl as well as /urs/local/elog/ssl and ssl folder in the user directory (I will call it <user-dir>) but when I launch elog I receive the error that cannot initialize SSL because the old self signed certificate server.crt in <user-dir>/ssl is not found.

I wonder where in elog.cfg or elsewhere is written that <user-dir>/ssl/server.crt must be usedand how to fix it

Thanks

I do run elog under:

But that does not change the location of my certificates: they are in "/usr/local/elog/ssl".
My guess: you just copied the .pem file to the /ssl directory, but did not rename it to server.crt?
And of course you need to overwrite server.key as well.

Kind Regards
Andreas

Hi,

Is there a way to export the ELOG entries into a file like an Excel sheet or something.  I see import but not export.

Appreciate your help.

Thanks.

Illam

Find -> Export to...

Thanks Stefan for your help.  It works but the only issue is, the screenshots that were included in the body of the entries are not usable.  Not sure if there is any workarounds for that.

...Illam

Hi,

I've just installed the news 3.1.5 version and I have 2 problems.
I don't know if it works with older versions because I started with latest.

- When using "select" menu then "edit" for multiple entries, the text is replaced with "- keep original text here -" instead of keeping the original values. Really annoying...

Another problem too, if I want to edit after, I have the error message "only author - keep original text here - can edit" although the author column is OK..
It looks like this problem is global and not only on text column.

- Version number is indicated "ELOG V3.1.4" instead of V3.1.5.

My config file :

I'm using Apache as reverse proxy with SSL and transparent Kerberos authentication (Microsoft Active Directory).
URL via Apache is https://elog.xxxxxx.xxx (no subdirectory).

Thanks for your help.

I checked and found that the bug which removed the main text was there since the beginning, but it's only triggered if you switch elog to French, it doesn't happen in the English version. I changed a bit the text processing so now it should work also in the French version.

I also changed the version number which is shown at the bottom to 3.1.5.

Stefan

Thanks for your prompt help.
It looks good for text but I still have problem with "select" function (even in English).

If I use "select" menu :
- When multiple values are selected it indicates "only user - keep original values - can edit" (freshly created).




- When a single value is selected, it indicates "only user XXX can edit" where XXX is my truncated name (the first 4 letters).



After editing in with admin account the author is now my truncated name :



If I want to edit a single entry (without select menu) it works perfectly.

Thanks.
 

If it works with a simple edit, then why don't you use that one to edit individual values. I checked and version 3.1.4 had already the same problem, so it was not newly introduced. I would have to invest a couple of hours to fix this issue correcly, which I simply don't have right now.

Thanks !

Sometime I need to edit multiple values to add a new choice.
By exemple, if I add a new column "status" (open, closed...) , it's mandatory to use select menu to add the new value to existent entries.

With a lot of lines it's not possible to edit one by one.

Hello,

I  tried to install Elog 3.1.4 from rpm on Oracle Linux 9 with command:

sudo dnf localinstall elog-3.1.4-3.el7.x86_64.rpm

But I got error:

Last metadata expiration check: 0:08:06 ago on Thu 02 Feb 2023 10:35:13 CET.
Error:
 Problem: conflicting requests
  - nothing provides libssl.so.10()(64bit) needed by elog-3.1.4-3.el7.x86_64
  - nothing provides libssl.so.10(libssl.so.10)(64bit) needed by elog-3.1.4-3.el7.x86_64
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)

Using dnf I installed libssl.so.11 (cannot find version 10) and it doesn't help. So my question is: can I use one of proposes by dnf solution as:

1. --skip-broken
2. --nobest

Does Elog will work stabilityy after that?

Best Regards

Hi Daniel,

The RPM has been build for EL7 so SSL share libs should be different with the one provided by EL9. :-)

Try to rebuild from tarball source with enclosed buildrpm script (or with elog srpms if you find any : rpm -i elog*.src.rpm && vim ~/rpmbuild/SPEC/elog.spec # update build options as SSL/LDAP/PAM... && rpmbuild -bb ~/rpmbuild/SPEC/elog.spec ).

Gûd luck