 Thu Apr 11 23:32:57 2013, Jill Russek, cascading -- DRS4 Osci.cpp & DRS.cpp
|
Stefan Ritt wrote:
|
|
Fri Apr 12 08:25:05 2013, Stefan Ritt, cascading -- DRS4 Osci.cpp & DRS.cpp
|
Jill Russek wrote:
|
|
Wed Dec 20 15:30:38 2017, Yoni Sher, cascading -- DRS4 Osci.cpp & DRS.cpp
|
Hi,
I'm trying to do the same thing (get 1 channel with 8192 bins), but I'm having some trouble with it. When I call SetChannelConfig(0,
8, 1) as suggeted, I get output that looks like noise on all readouts. Could you please explain what is supposed to happen in this case? |
|
Wed Dec 20 16:21:42 2017, Stefan Ritt, cascading -- DRS4 Osci.cpp & DRS.cpp
|
First you need a board which is modified in hardware to support channel cascading. Basically there are internal resistors which connect each input connector
to two channels. You have to specify this when you order the board. Then you can use the new drs_exam_2048.cpp file contains in the git repository which
correctly configures and reads out the board in two-channel cascading mode. Putting all 8 channels together is not supported by the evaluation boards. |
|
Wed Dec 20 16:30:45 2017, Yoni Sher, cascading -- DRS4 Osci.cpp & DRS.cpp
|
Hi,
The board is modified (and checks out with the DRSScope program). Could you please point me to the drs_exam_2048.cpp file? I can't seem to
fine the most up-to-date git repository.... |
|
Wed Dec 20 22:14:35 2017, Stefan Ritt, cascading -- DRS4 Osci.cpp & DRS.cpp
|
https://bitbucket.org/ritt/drs4eb
|
 Tue Jul 9 11:40:00 2013, Dmitry Hits, cannot save in binary format
|
Hi,
I would like to save the waveform in a binary format. When I click Save then change format from xml to dat in the menu. I still get xml format
but with dat extension. |
|
Tue Jul 9 12:23:06 2013, Stefan Ritt, cannot save in binary format
|
Dmitry Hits wrote:
Hi, |
|
Tue Jul 9 14:00:49 2013, Dmitry Hits, cannot save in binary format
|
Stefan Ritt wrote:
|
|
Mon Apr 8 18:11:02 2013, Dmitry Hits, binary to root
|
Hi,
Does anyone has a program that converts a binary file from drsosc output to a ROOT tree format? |
|
Tue Aug 26 14:16:26 2014, Roman Gredig, binary files with more than 4 drs board ver. 5.0.2
|
Dear Stefan
after having some problems with writing binary files with more than 4 drs boards (in multiboard-mode) I might
|
|
Thu Oct 16 16:15:16 2014, Stefan Ritt, binary files with more than 4 drs board ver. 5.0.2
|
> Dear Stefan
>
> after having some problems with writing binary files with more than 4 drs boards (in multiboard-mode) I might
|
|
Wed Aug 13 20:17:19 2014, Roman Gredig, binary files time calibration header in drs-5.0.2
|
Dear Stefan
I have a problem considering binary data files.
|
|
Thu Oct 16 16:16:12 2014, Stefan Ritt, binary files time calibration header in drs-5.0.2
|
> Dear Stefan
>
> I have a problem considering binary data files.
|
Mon Feb 29 12:58:17 2016, Dmitry Philippov, baseline shift 
|
Hello! My name is Dmitry. I am from SiPM Lab is NRNU MEPhI (Russia, Moscow). We bought DRS4 evaluation board V5 with firmware 21305. We use 5.0.4 build
21911 2015-11-23 software version (and before that we used 5.0.3 build 21508, 2014-10-15) with Windows 7 32bit.
We observe some strange behaviour. When we save waveforms (in xml or binary data) we see that some of them have the baseline shifted of about |
|
Mon Feb 29 13:09:29 2016, Stefan Ritt, baseline shift
|
The baseline shift comes from some instable power supply inside the evaluation board which cannot be controlled to the mV level. In a real measurement,
you usually get an additional baseline shift due to some environmental electromagnetic interferences, such as a 50 Hz signal. People fix this shifting
baseline by always aquiring a small portion (10-20 samples) of the baseline before any signal from a particle detector. The signal is then corrected event-by-event |
|
Tue Feb 15 11:59:22 2022, Alex Myczko, apt install drs4eb
|
drs4b is now officially on these distributions:
https://repology.org/project/drs4eb/versions
enjoy |
|
Mon Jun 10 14:09:13 2013, tmiron alon, add an average ability to the Scope
|
Stefan Ritt wrote:
|
|
Mon Jun 10 16:24:21 2013, Stefan Ritt, add an average ability to the Scope
|
tmiron alon wrote:
|
|
Thu Jul 4 08:32:11 2013, tmiron alon, add an average ability to the Scope
|
Stefan Ritt wrote:
|