| ID |
Date |
Author |
Subject |
Text |
 |
|
901
|
Tue Sep 5 03:28:52 2023 |
Matias Henriquez | Input range switch added in Version 2.1.3 | Hello,
It is not quite clear to me yet
how the input range is only determined by |
|
|
902
|
Wed Sep 13 13:18:45 2023 |
Stefan Ritt | Input range switch added in Version 2.1.3 | To achieve an input range of -1V to 0V,
you need an external buffer which can shift
this range into the DRS4 range of -0.5V to |
|
|
608
|
Mon May 22 18:27:56 2017 |
Esperienza Giove | Invalid magic number 0000 | Hello everybody!
After some times i init my board,
or if i stop the program during the acquisition, |
|
|
609
|
Tue May 23 10:24:47 2017 |
Stefan Ritt | Invalid magic number 0000 | Under linux, many people observed that
the USB connection is unstable to the evaluation
board. This must be related to the linux |
|
|
610
|
Thu May 25 20:17:41 2017 |
Esperienza Giove | Invalid magic number 0000 | Hello, thanks for your answer. Unluckily
if i try to reset in this way it keeps hanging
musb_write: requested |
|
|
611
|
Thu May 25 20:20:57 2017 |
Esperienza Giove | Invalid magic number 0000 | Hello, thanks for your answer. Unluckily
if i try to reset in this way it keeps hanging
musb_write: requested |
|
|
612
|
Fri May 26 08:48:25 2017 |
Stefan Ritt | Invalid magic number 0000 | There is no other way to reset the board.
As I said, people running this under Windows
or MacOS are fine, so maybe this calls for |
|
|
423
|
Sat May 23 11:03:20 2015 |
Felix Bachmair | Issue with Trigger rates below ~100Hz | Hi
We are working with the DRS 4 V5
version and we investigated an issue with |
|
|
435
|
Thu Jul 2 08:53:17 2015 |
Felix Bachmair | Issue with Trigger rates below ~100Hz | Hi,
We did a further investigation
of this problem: |
|
|
586
|
Tue Jan 31 01:37:35 2017 |
VO HONG HAI | LLD and ULD discriminations, | Dear Stefan,
Is there any way to develop
LLD and ULD discrimination in DSR-4 evaluation
board?
Best regards,
V.H.Hai |
|
|
587
|
Tue Jan 31 08:40:04 2017 |
Stefan Ritt | LLD and ULD discriminations, | Not inside the board. Each channel has
a single discriminator. You can select to
trigger on a rising or falling edge, but |
|
|
483
|
Wed Mar 9 09:57:20 2016 |
Christian D | LabView | Hi,
I would like to use the DRS4 board
with LabView for fast readout. |
|
|
564
|
Fri Nov 18 16:38:42 2016 |
Gerard Montarou | LabView | Hello,
Did you start to write some VI
to interface DRS4board with labview ? |
|
|
711
|
Mon Aug 13 19:44:59 2018 |
Martin Petriska | Latch delay support | Hi,
https://forge.physik.rwth-aachen.de/projects/drs4-rwth
Not sure about their licensing, |
|
|
712
|
Tue Aug 14 06:10:49 2018 |
Stefan Ritt | Latch delay support | I put that on the wish list, but I won't
have time for that in the next months.
Stefan |
|
|
447
|
Tue Nov 3 22:37:56 2015 |
Will Flanagan | Latest macro for DRS4 V5 | Hi DRS4 Experts,
I have an extremely naive question:
Is there any official macro to unpack the |
|
|
448
|
Tue Nov 3 23:15:38 2015 |
Will Flanagan | Latest macro for DRS4 V5 | I should of course mention that I looked
through the DRS4 website and didn't see
anything obvious: https://www.psi.ch/drs/evaluation-board |
|
|
449
|
Wed Nov 4 15:40:10 2015 |
Stefan Ritt | Latest macro for DRS4 V5 | Have a look here: elog:361
|
|
|
450
|
Thu Nov 5 00:18:42 2015 |
Will Flanagan | Latest macro for DRS4 V5 | Hi Stefan,
This is absolutely perfect.
Thanks, |
|
|
572
|
Mon Nov 28 22:28:34 2016 |
Randall Gladen | Long timing between two channels | I don't believe I fully understand
how the timing works between multiple channels
on DRS4 board, even after reading the manual, |
|