| ID |
Date |
Author |
Subject |
Text |
 |
|
386
|
Wed Oct 15 10:14:32 2014 |
Simon Weingarten | Clock settings in daisy chain DAQ | Hi,
I'm currently working on a little
DAQ system with four DRS evaluation boards. |
|
|
387
|
Wed Oct 15 10:52:58 2014 |
Stefan Ritt | Clock settings in daisy chain DAQ |
|
|
|
388
|
Wed Oct 15 11:34:43 2014 |
Simon Weingarten | Clock settings in daisy chain DAQ |
|
|
|
389
|
Wed Oct 15 12:15:58 2014 |
Stefan Ritt | Clock settings in daisy chain DAQ | Here is the full version
of the program with clock daisy-chaining.
Before switching to the external clock, it |
|
|
403
|
Fri Apr 17 10:07:38 2015 |
Simon Weingarten | Clock settings in daisy chain DAQ | Hi Stefan,
do you know how these numbers (400ps
and 60ps) scale with the sampling rate? The |
|
|
404
|
Mon Apr 20 13:08:24 2015 |
Stefan Ritt | Clock settings in daisy chain DAQ | The resolution coming from the sampling
rate goes into these numbers, but just marginally.
At 5 GSPS, you get a few ps reolution, while |
|
|
222
|
Wed Feb 27 13:47:32 2013 |
Georg Winner | Chip Test - Cell Error | When starting Chip Test in DRS Command
Line Interface, I receive the following message:
Cell error on channel 1, cell |
|
|
227
|
Wed Mar 6 13:08:03 2013 |
Stefan Ritt | Chip Test - Cell Error |
|
|
|
563
|
Fri Nov 18 05:52:45 2016 |
Kurtis Nishimura | Channel offsets in GetTime() | Hello,
I have a question about the GetTime()
method in DRS.cpp. I understand how |
|
|
565
|
Mon Nov 21 14:13:32 2016 |
Stefan Ritt | Channel offsets in GetTime() | Cell 700 is arbitrary. You can choose any
cell to align the channels to each other.
The only requirement is that it's always |
|
|
895
|
Sat Oct 22 13:24:20 2022 |
Phan Van Chuan | Channel Cascading Option in the 2048-bin | Dear Stefan,
We are using DRS4 evaluation board
version 5.1 and firmware version 30000 (as |
|
|
896
|
Mon Oct 24 12:50:24 2022 |
Stefan Ritt | Channel Cascading Option in the 2048-bin | The board is delivered in one or the other
mode and not meant to be changed by the user,
since this requires very delicate soldering |
|
|
795
|
Mon Aug 31 16:44:12 2020 |
Hans Steiger | Channel Cascading | Dear All,
I have a board with Channel Cascading
Option. I have the problem, that it seems |
|
|
796
|
Mon Aug 31 17:17:30 2020 |
Stefan Ritt | Channel Cascading | If you have a board with cascading option,
it should show the "combined" option
in the 2048-bin option enabled (not grayed), |
|
|
302
|
Thu Nov 14 11:39:06 2013 |
Schablo | Cascading of channels | Hello, I want use cascading
of channels for 2048 cell - SetChannelConfig(0,8,4),
but i can't understand how . Please, help |
|
|
303
|
Thu Nov 14 12:51:56 2013 |
Stefan Ritt | Cascading of channels |
|
|
|
311
|
Thu Nov 21 14:35:57 2013 |
Schablo | Cascading of channels |
|
|
|
312
|
Thu Nov 21 14:45:56 2013 |
Stefan Ritt | Cascading of channels |
|
|
|
862
|
Sat Feb 12 13:06:56 2022 |
Matias Senger | Cannot trigger on pulses, have to trigger on undershoot | I am using the DRS4 board trying to measure
pulses produced by an LGAD. I have no prior
experience with this board, have just installed |
|
|
864
|
Tue Feb 15 12:02:29 2022 |
Stefan Ritt | Cannot trigger on pulses, have to trigger on undershoot | The trigger comparator is a ADCMP601 unit
which requires a minimum pulse width of 3-4
ns. I see that your pulses are only 1-2 ns |
|