ID |
Date |
Author |
Subject |
Text |
 |
|
848
|
Wed Oct 27 08:11:42 2021 |
Stefan Ritt | Trigger multiple boards independently | I'm not sure if the rate would go up
to 2 kHz (not 2 GHz!). Depends how the USB
hub is designed. What you can do however |
|
|
847
|
Tue Oct 26 23:18:32 2021 |
Javier Caravaca | Trigger multiple boards independently | Thank you Stefan. Actually I noticed that the
source code of drs_exam was available after
I started this thread, and that was the solution |
|
|
846
|
Tue Oct 26 15:05:18 2021 |
Mehrpad Monajem | External trigger and drs_exam | Thanks for your reply.
1- I want to have a window size
of 25.6ns instead of 200ns at 5GSPS. I have |
|
|
845
|
Tue Oct 26 12:02:56 2021 |
Stefan Ritt | Trigger multiple boards independently | Unfortunately an independent operation
from a single computer is not supported by
the software. You can try to modify the drs_exam |
|
|
844
|
Tue Oct 26 12:00:51 2021 |
Stefan Ritt | External trigger and drs_exam | 1. Why should your waveform start from
0 to 5ns? I don't get your point. Whenever
you trigger a readout, you get a 200ns wide |
|
|
843
|
Tue Oct 26 10:41:46 2021 |
Mehrpad Monajem | External trigger and drs_exam | Hi Stefan,
I have two problems regarding using |
|
|
842
|
Mon Oct 25 18:48:04 2021 |
Javier Caravaca | Trigger multiple boards independently | Hello,
I recently acquired 4 DRS4 boards
and I wanted to ask if it was possible to |
|
|
841
|
Fri Oct 15 06:15:53 2021 |
Keita Mizukoshi | livetime (or deadtime) of DRS4 evaluation board | Thank you very much.
|
|
|
840
|
Thu Oct 14 18:42:31 2021 |
Stefan Ritt | livetime (or deadtime) of DRS4 evaluation board | I would say not exactly, but it's a
good approximation.
|
|
|
839
|
Thu Oct 14 18:03:52 2021 |
Keita Mizukoshi | livetime (or deadtime) of DRS4 evaluation board | Thank you very much for your response.
Excuse me for my very stupid confirmation.
If I take N events finally and the |
|
|
838
|
Thu Oct 14 15:25:07 2021 |
Stefan Ritt | livetime (or deadtime) of DRS4 evaluation board | The one thing you can do easily is to look
at the scaler values. If one channel counts
all physical events, and you have all read |
|
|
837
|
Thu Oct 14 15:19:00 2021 |
Keita Mizukoshi | livetime (or deadtime) of DRS4 evaluation board | Dear experts,
I would like to use the DRS4 evaluation |
|
|
835
|
Sat Sep 18 15:48:30 2021 |
Stefan Ritt | drs_exam_multi with non-v4 boards, default configuration | Hi,
please note the the evaluation
board is what it says, a board to evaluate |
|
|
834
|
Sat Sep 18 15:47:50 2021 |
Stefan Ritt | how to acquire the stop channel with 2x4096 cascading | The problem must be on your side, since
the Write Shift Register readout works in
other applications with the DRS4 chip. So |
|
|
833
|
Thu Sep 16 19:04:06 2021 |
Patrick Moriishi Freeman | drs_exam_multi with non-v4 boards, default configuration | Hello,
I made a modified version drs_exam_multi.cpp,
but ran into an issue when running. When |
|
|
832
|
Mon Sep 6 14:42:23 2021 |
Jiaolong | how to acquire the stop channel with 2x4096 cascading | Hi Steffan,
I have a question
about how to acquire the stop channel: |
|
|
831
|
Tue Aug 10 13:57:09 2021 |
Mehrpad Monajem | C code to read the 4 channel with external trigger | Thank you for the reply.
In the version that I have, I cannot
find drs_exam_2048.cpp file. Could you please |
|
|
830
|
Mon Aug 9 12:50:31 2021 |
Stefan Ritt | C code to read the 4 channel with external trigger | Sorry the late reply, I was on vacation.
Here are some answers:
1. I'm sorry I can't help |
|
|
829
|
Wed Jul 14 14:55:09 2021 |
Mehrpad Monajem | C code to read the 4 channel with external trigger | Hi there,
Recently I bought a 5GSPS evaluation
board with 2048 sampling points. |
|
|
828
|
Wed May 5 10:12:44 2021 |
Stefan Ritt | recording only timestamp and amplitude and/or filesize maximum | The maximum file size depends on the underlying
linux file system. Common values are 4-16
GBytes. |
|