Thu Mar 14 03:43:49 2019, Deepak Samuel, How to buy DRS evaluation kit
|
Dear Stefan,
I have emailed drs4@psi.ch a couple of times regarding the pricing of the evaluation kits for academic use in India and have not received any
reply and hence writing in this forum. Could you please help me in this? |
Thu Nov 16 02:55:44 2017, Diego Yankelevich, Averaging capabilities
|
The Display window in the Oscilloscope software shows averaging capabilites but I have not been able to activate these. Is it possible to activate averaging
with the existing oscilloscope software? Thanks |
Tue Dec 12 00:25:50 2017, Diego Yankelevich, External trigger using Raspberry Pi
|
Dear Steffan:
We have been able to use the DRS4 using a Raspberry Pi but we have not been able to use the external trigger. What we are doing is basically
comment out the code shown below (downloaded from PSI) to use the hardware trigger and uncomment the code to use the external trigger. We have not been |
Thu Feb 28 10:47:14 2013, Dmitry Hits, clock and trigger outs
|
Hi,
I am considering using the DRS4 evaluation board as an ADC card for the wire chamber in the physics lab (VP) experiment at ETH. However, the wire
chamber has 8 outputs, so I would need to have two of such boards. Is it possible to synchronise them, online or offline? From the website, it looks
|
Mon Apr 8 18:11:02 2013, Dmitry Hits, binary to root
|
Hi,
Does anyone has a program that converts a binary file from drsosc output to a ROOT tree format? |
Tue Jul 9 11:40:00 2013, Dmitry Hits, cannot save in binary format
|
Hi,
I would like to save the waveform in a binary format. When I click Save then change format from xml to dat in the menu. I still get xml format
but with dat extension. |
Tue Jul 9 14:00:49 2013, Dmitry Hits, cannot save in binary format
|
Stefan Ritt wrote:
|
Wed Nov 6 11:53:28 2013, Dmitry Hits, flickering screen for drsosc
|
Hi,
I have install drs software on ASUS EeeBox with Ubuntu 12.04 LTS. When I try to use ./drsosc the oscilloscope window flickers. Can you suggest |
Mon Nov 18 11:20:15 2013, Dmitry Hits, flickering screen for drsosc
|
Stefan Ritt wrote:
|
Mon Nov 18 15:49:01 2013, Dmitry Hits, synchronisation of readouts of two boards for offline analysis
|
Dear Stefan,
I am trying to synchronise the readout of two test boards, one is the DRS4 test board, the other is PSI46 test board (used for the readout of CMS
pixel chip) for the offline analysis. I think that the most secure way to accomplish this is to pass a trigger number from one test board to the other. |
Tue Nov 26 15:36:39 2013, Dmitry Hits, reducing sampling speed
|
Dear Stefan
Is there an easy way to reduce sampling speed below 0.7 GSPS? I would like to record traces up to 5 usec long.
Thank you |
Fri Dec 13 10:37:18 2013, Dmitry Hits, input protection in DRS4 evaluation board
|
Dear Stefan
Last month I was using a DRS4 evaluation board to digitise the signal from the charged particles in piM1 beam line at PSI. The beam in piM1 is
a mixture of pions with a small percentage of protons. Pions are close to minimum ionising and were producing the signals on the order of 250 mV (Landau |
Mon Dec 16 11:09:25 2013, Dmitry Hits, synchronisation of readouts of two boards for offline analysis
|
Stefan Ritt wrote:
|
Fri Sep 12 11:52:21 2014, Dmitry Hits, synchronizing two DRS4 evaluation boards readout with one computer
|
Hi everyone,
Has anyone tried to synchronize 2 (two) DRS4 evaluation boards readout by the same computer? I have read about some attempts on this board in the
past, but I do not know if they have succeeded. If yes, could you share your experience and/or software. |
Fri Sep 12 13:37:42 2014, Dmitry Hits, synchronizing two DRS4 evaluation boards readout with one computer
|
Stefan Ritt wrote:
|
Fri Sep 12 14:57:22 2014, Dmitry Hits, compilation error for v5.0.2
|
Hi,
I am getting the following compilation error when trying to compile version 5.0.2 software:
src/DOFrame.cpp:617:14: error: invalid conversion from ‘char*’ to ‘wxChar {aka wchar_t}’ [-fpermissive]
I |
Fri Sep 12 16:38:24 2014, Dmitry Hits, compilation error for v5.0.2
|
Stefan Ritt wrote:
|
Mon Feb 29 13:33:06 2016, Dmitry Hits, two DRS4 boards configuration with 2048 samples each
|
Dear Stefan,
I daisy-chained two boards (master sn#: 2514 - slave sn#: 2513) each with 2048 samples. However, when I use drsosc and put check mark in "configure
multi-board daisy-chain" I see only 1024 samples. Namely, the first 1024 samples, the last part is missing. When I remove this check mark, I |
Mon May 2 14:31:28 2016, Dmitry Hits, two DRS4 boards configuration with 2048 samples each
|
Hi Stefan
Any chance you have time to fix the software for multiboard configuration with 2048 samples each. I tried 5.0.5, but drsosc still shows
only half of the waveform. |
Wed Feb 16 14:06:45 2022, Dmitry Hits, Sliders missing in drsosc
|
Hi everyone,
Did anyone have a "missing sliders problem" in GUI (see attachment) accompanied by the following message in the terminal.
(drsosc:4611): Gtk-WARNING **: 14:05:11.249: Negative content width -4 (allocation 20, extents 12x12) while allocating gadget (node scale, owner |