Hi everyone,

I am currently trying to setup elog as a docker container. I wonder if there is any reason why the elog debian package is stuck at version 3.1.3? Would it be possible to update it to the latest version? 

Thanks very much!

The elog downloads page is slightly out of date, https://elog.psi.ch/elog/download.html

1) the "git clone" instructions work (but there is no git tags corresponding to different releases, I suggest adding test: "elog developers 
recommend always using latest version from elog git repository").

2) "elog source code", recommends downloading tar file, but latest tar file is from February 2023, probably out of date. people who can compile elog 
from sources can do "git clone", is the "tar" method still relevant?

3) windows binaries, latest available is from 2018, before the famous security fixes, probably no longer safe for running on the open internet. I 
suggest we remove this section and say "sorry, windows binaries no longer available".

4) linux binaries, all links are dead, and we have requested removal of elog packages from red hat, debian and ubuntu. (and they have been removed).

K.O.

Thanks for the reminder, I updated the download instructions.

Anyone using elog on FreeBSD nowadays?  I know it used to be in the ports tree about 10 years ago but seems to be abandoned.  Tried to compile from source on 14.1, but no luck there.

Welp, nevermind, I dug a little more and managed to compile it on 14.1 using cmake.

I have been trying to build and run elog under Mac OS  X 10.2.6, without sucess.  I 
understand that this is not one of the 'supported' platforms, but I hope that there is someone   
here who might know the work-around to my problem.

I've tried building elog 2.2.5, 2.3.6, 2.3.7, and 2.3.8.  I've tried using the compiler that comes 
in the Mac OS X 10.2 box, as well as the gcc-based compiler supplied in Apple's Dec 2002 
developer update (gcc 3.1), and the June '03 update as well (gcc 3.3).

elog builds without error in all cases I tried.

When I run it, it will correctly serve the demo notebook.  However, when the user clicks on the 
test message to display it in full, there is a seg fault.

I suspect that the trouble might be with something defined in time.h.

I've run it in gdb, and the result is appended to this message.  This is for gcc 3.3 and elog 
2.3.8.


I would greatly appreciate any hints or suggestions.

Cheers, Joe

---

[satsuma:~/Documents/elog_build/elog-2.3.8] jgiaime% gdb ./elogd
GNU gdb 5.3-20030128 (Apple version gdb-282) (Fri Jun 13 03:33:07 GMT 2003)
Copyright 2003 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "powerpc-apple-darwin".
Reading symbols for shared libraries .. done
(gdb) run
Starting program: /Users/jgiaime/Documents/elog_build/elog-2.3.8/elogd 
Reading symbols for shared libraries . done
Indexing logbook "demo" ... ok
Server listening on port 8080...

Program received signal EXC_BAD_ACCESS, Could not access memory.
0x00005870 in el_retrieve (lbs=0x1, message_id=50, date=0xbfff2500 "demo", 
attr_list=0x0, attrib=0x365620, n_attr=1, text=0xbfff2280 "1", textsize=0x1, 
in_reply_to=0x0, reply_to=0x0, attachment=0x0, encoding=0x0, locked_by=0x0) at src/
elogd.c:2775
2775    {
(gdb) up
#1  0x0001d9b4 in interprete (lbook=0x1 <Address 0x1 out of bounds>, path=0xbfff2280 
"1") at src/elogd.c:12279
12279       show_elog_message(lbs, dec_path, command);
(gdb) up
#2  0x0001db10 in decode_get (logbook=0xbffff340 "demo", string=0x3a300a "1") at src/
elogd.c:12325
12325     interprete(logbook, path);
(gdb) up
#3  0x00020080 in server_loop (tcp_port=836736, daemon=-1073732640) at src/
elogd.c:13398
13398             decode_get(logbook, p);
(gdb) up
#4  0x00021134 in main (argc=1, argv=0xbffff850) at src/elogd.c:13832
13832     server_loop(tcp_port, daemon);
(gdb) up
Initial frame selected; you cannot go up.
(gdb) 

Joe,

Run the command 
`limit' (if you are running tcsh) and `ulimit -a' if you are running bash
(these are command line programs that will tell you the resources you are
allowed to use.  Look at filesize, datasize, and stacksize - these need to be
8M or so)

You can increase these by typing, e.g.,

limit filesize unlimited
limit datasize unlimited
limit stacksize unlimited

(the equivalent command for bash are `ulimit -f unlimited', `ulimit -d
unlimited' and `ulimit -s unlimited', without the quotes)

which will increase the limits to the max imposed by the administrator.  
If that doesn't increase your limits, you will have to contact the admin to
have them raised system wide.

If you are the administrator/sole user, you can set them to the max in the file:

/etc/rc.common.

I have included the following at the end of the file:

##
# Enable coredumps if requested.
##
if [ "${COREDUMPS:=-NO-}" = "-YES-" ]; then
    ulimit -c unlimited
    ulimit -d unlimited
    ulimit -s unlimited
fi


and I have put this in /etc/hostconfig

COREDUMPS=-YES-

Hope this helps - if that doesn't fix it, sorry!

Sridhar

> I have been trying to build and run elog under Mac OS  X 10.2.6, without
sucess.  I 
> understand that this is not one of the 'supported' platforms, but I hope
that there is someone   
> here who might know the work-around to my problem.
> 
> I've tried building elog 2.2.5, 2.3.6, 2.3.7, and 2.3.8.  I've tried using
the compiler that comes 
> in the Mac OS X 10.2 box, as well as the gcc-based compiler supplied in
Apple's Dec 2002 
> developer update (gcc 3.1), and the June '03 update as well (gcc 3.3).
> 
> elog builds without error in all cases I tried.
> 
> When I run it, it will correctly serve the demo notebook.  However, when the
user clicks on the 
> test message to display it in full, there is a seg fault.
> 
> I suspect that the trouble might be with something defined in time.h.
> 
> I've run it in gdb, and the result is appended to this message.  This is for
gcc 3.3 and elog 
> 2.3.8.
> 
> 
> I would greatly appreciate any hints or suggestions.
> 
> Cheers, Joe
> 
> ---
> 
> [satsuma:~/Documents/elog_build/elog-2.3.8] jgiaime% gdb ./elogd
> GNU gdb 5.3-20030128 (Apple version gdb-282) (Fri Jun 13 03:33:07 GMT 2003)
> Copyright 2003 Free Software Foundation, Inc.
> GDB is free software, covered by the GNU General Public License, and you are
> welcome to change it and/or distribute copies of it under certain conditions.
> Type "show copying" to see the conditions.
> There is absolutely no warranty for GDB.  Type "show warranty" for details.
> This GDB was configured as "powerpc-apple-darwin".
> Reading symbols for shared libraries .. done
> (gdb) run
> Starting program: /Users/jgiaime/Documents/elog_build/elog-2.3.8/elogd 
> Reading symbols for shared libraries . done
> Indexing logbook "demo" ... ok
> Server listening on port 8080...
> 
> Program received signal EXC_BAD_ACCESS, Could not access memory.
> 0x00005870 in el_retrieve (lbs=0x1, message_id=50, date=0xbfff2500 "demo", 
> attr_list=0x0, attrib=0x365620, n_attr=1, text=0xbfff2280 "1", textsize=0x1, 
> in_reply_to=0x0, reply_to=0x0, attachment=0x0, encoding=0x0, locked_by=0x0)
at src/
> elogd.c:2775
> 2775    {
> (gdb) up
> #1  0x0001d9b4 in interprete (lbook=0x1 <Address 0x1 out of bounds>,
path=0xbfff2280 
> "1") at src/elogd.c:12279
> 12279       show_elog_message(lbs, dec_path, command);
> (gdb) up
> #2  0x0001db10 in decode_get (logbook=0xbffff340 "demo", string=0x3a300a
"1") at src/
> elogd.c:12325
> 12325     interprete(logbook, path);
> (gdb) up
> #3  0x00020080 in server_loop (tcp_port=836736, daemon=-1073732640) at src/
> elogd.c:13398
> 13398             decode_get(logbook, p);
> (gdb) up
> #4  0x00021134 in main (argc=1, argv=0xbffff850) at src/elogd.c:13832
> 13832     server_loop(tcp_port, daemon);
> (gdb) up
> Initial frame selected; you cannot go up.
> (gdb)