I think this is a bug report. 
However, I am not sure whether the problem is in the new version of Apple's WebKit (15.4) or in the ELOG itself.

When we edit an ELOG record with Safari (as of version 15.4, new WebKit features added) the number of "newline" symbols (actually LF, 0xA) are doubled.

So, for instance, if I edit the following page (1 LF symbol between "aaa" and "bbb"):
```
aaa
bbb
```

then after a "Submit" (without actually any changes) the record becomes (2 LF symbols):

```
aaa

bbb
```

then after a "Submit" (without actually any changes) the record becomes (4 LF symbols in between):
```
aaa



bbb
```

NOTE: The LF symbol at the end (after the "bbb" line) does NOT get duplicated (it gets truncated, I believe).


Our current ELOG version is "ELOG V3.1.4-4936b76".
Could you please have a look? 

I would like to edit an existing entry by adding new attachments at each call of elog from the command line.

If I issue

elog -h localhost -p 8XXX -l test -f /path/to/file_0.pdf -e N -x

and then 

elog -h localhost -p 8XXX -l test -f /path/to/file_1.pdf -e N -x

file_1.pdf replaces file_0.pdf, while I'd like entry N to have both pdfs.

Is there a workaround?

We're up to 30 logbooks, 3.2GB data total and Elog damen has now become slow. Performance stats show 100%CPU on startup then reduces. Searches and general UI activity is slow. It runs on a VM with 4GB memory allocated. Up to 15 concurrent users.

Trimming and archiving some data files may help but I gather overall this is underpowered hardware in this instance so what is recommended system requirements for a config like this?

Good day all ,

does Elog has a paid version that is not open soureced 

regards

William Vasio 

Hi, I have an issue with my local elog setup. it's usable but one function is just not working.

Problem

I'm getting weird error messages when trying to write or read entries from the CLI client.

I have googled a lot and most elog client examples are not giving the actual output, more like elog -h <host> -p <myport> -a ... -x -m "myfile" but I hope I got the options right.

Upgrading did not change the behaviour.

Question?

• anyone see problems in the commands I tried below
• with OSX in general
• have a recent setup on OSX that just works

Env

I'm running elog on my OSX laptop for tracking issues / improvements on client's IT systems. It's proven really good for storing my notes.

One "kink" is I kinda need both of them on the laptop since I cannot assume to have working network connectivity, i.e. when documenting network outages or datacenter maintenance where everything is off.

One thing I couldn't get to work was the CLI. Today I upgraded to the latest build, and tried again.

Env: OSX 12.4 (x86_64)

elog Client compiled from latest source tree (bcd7b50edd3d687425e6c5b0906dc02c8690a24e)

with minimal adjustments (turn off SSL since I can't get it right on OSX, rename two .c files in mxml to .cxx)

Outputs

$ echo "blah" | ./elog -h 127.0.0.1 -p 8080 -l intern -r 2 -x
Cannot retrieve host name: Undefined error: 0
$ echo "blah" | ./elog -h 127.0.0.1 -p 8080 -l intern -r 2 -x
Cannot retrieve host name: Undefined error: 0
$ host 127.0.0.1
1.0.0.127.in-addr.arpa domain name pointer localhost.
$ elog -?
elogd 3.1.4 built Oct  8 2020, 03:14:21 revision 7c3fd00b
$ elog -?                                                                       
elogd 3.1.4 built Jul  5 2022, 18:23:30 revision bcd7b50e

As per the messages, I'm not entirely sure if it's an issue with the client or the server. upgrading both components made no difference.

Config

Theme = default
Comment = Logbuch Findings etc
Attributes = Context, Type, Category, Subject, ObjectPath
Options Context = global, intern, [redacted]
Options Type = Anpassung, Finding, Problem, Update, Auftrag, Planung
Options Category = General, Hardware, Software, Network, Other
Extendable Options = Category
Required Attributes = Context, Type, ObjectPath
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Context, Type

make output

$ gmake                                                
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -I/opt/local/include -o elog src/elog.cxx mxml.o crypt.o -L/opt/local/lib
ld: warning: directory not found for option '-L/opt/local/lib'
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -I/opt/local/include -w -c -o auth.o src/auth.cxx
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -I/opt/local/include -o elogd src/elogd.cxx auth.o mxml.o crypt.o -L/opt/local/lib
ld: warning: directory not found for option '-L/opt/local/lib'
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -I/opt/local/include -o elconv src/elconv.cxx -L/opt/local/lib
ld: warning: directory not found for option '-L/opt/local/lib'

$ ls -ltr
[...]
-rw-r--r--   1 floh  staff     4811  5 Jul 17:58 CMakeLists.txt
drwxr-xr-x  25 floh  staff      800  5 Jul 17:58 doc
drwxr-xr-x  10 floh  staff      320  5 Jul 17:58 scripts
drwxr-xr-x  13 floh  staff      416  5 Jul 17:58 src
drwxr-xr-x  10 floh  staff      320  5 Jul 18:15 mxml
-rw-r--r--   1 floh  staff    36424  5 Jul 18:15 mxml.o
-rw-r--r--   1 floh  staff     8784  5 Jul 18:15 crypt.o
-rw-r--r--   1 floh  staff     5886  5 Jul 18:23 Makefile
-rwxr-xr-x   1 floh  staff    90840  5 Jul 18:23 elog
-rw-r--r--   1 floh  staff     2976  5 Jul 18:23 auth.o
-rwxr-xr-x   1 floh  staff  1390664  5 Jul 18:23 elogd
-rwxr-xr-x   1 floh  staff    52112  5 Jul 18:23 elconv


$ sudo gmake install
Password:
install: elog -> /usr/local/bin/elog
install: elconv -> /usr/local/bin/elconv
install: elogd -> /usr/local/sbin/elogd
install: man/elog.1 -> /usr/local/man/man1//elog.1
install: man/elconv.1 -> /usr/local/man/man1//elconv.1
install: man/elogd.8 -> /usr/local/man/man8//elogd.8
install: scripts/ckeditor-config.js -> /usr/local/elog/scripts//ckeditor-config.js
install: scripts/dnd.js -> /usr/local/elog/scripts//dnd.js
install: scripts/elcode.js -> /usr/local/elog/scripts//elcode.js
install: scripts/im.js -> /usr/local/elog/scripts//im.js
install: scripts/jquery-1.11.1.min.js -> /usr/local/elog/scripts//jquery-1.11.1.min.js
install: scripts/load-ckeditor.js -> /usr/local/elog/scripts//load-ckeditor.js
Installing CKeditor to /usr/local/elog/scripts/ckeditor
Installing resources to /usr/local/elog/resources
Installing themes to /usr/local/elog/themes
Installing example logbook to /usr/local/elog/logbooks/demo
install: logbooks/demo/2001/011108a.log -> /usr/local/elog/logbooks/demo/2001/011108a.log
install: elogd.plist -> /Library/LaunchDaemons/ch.psi.elogd.plist
The elogd service can now be started with
  sudo launchctl load /Library/LaunchDaemons/ch.psi.elogd.plist

We were running ELOG for many many years in our experiments and the instance was operated on a Debian XEN server as a container. I am now trying to migrate it into our Docker Swarm cluster and I am using the https://hub.docker.com/r/de1lz/elog-docker Docker image, which works very well with our logbooks when I run it as a single container. However, when I put the container behind my load balancer (HAProxy) using the simple HTTP mode (which works very well for all the other HTTP-based services) with this simple configuration:

backend be_elog.km3net.de
    mode http
    server-template km3net-elog- 1 km3net-elog_elog:8080 check resolvers docker init-addr libc,none

I get a "too many redirects" error when I try to access one of the logbooks. The starting page works fine, but every other link leads to a pile-up of redirects.

Here is the current instance running, where you can see the behaviour: https://elog.test.km3net.de (all log entries deleted and only two logbooks activated)

My question is: what kind of redirect could go wrong here? I don't know how the internal HTTP server of ELOG works, but maybe someone faced similar issues.

My ELOG configuration is also pretty basic, and as I wrote above, everything works when I run it without the load balancer (single instance at the moment). Here is the top part of the configuration, it contains a few dozens of logbooks but they are configured the very same way. 

;User Settings
;=============
Password file = login.xml
Admin user = km3net_admin
Self register = 0
Allow password change = 0
Allow config = km3net_admin

;Group Settings:
;====
Group ELOGKM3NET = Operations IT, Operations FR

[Operations IT]
Subdir = Operations_IT
Theme = default
Default encoding = 0
Comment = KM3NeT IT Detector Operations
Attributes = Author, Type, Subject
Options Author = A, B, C
Options Type = PPM-DOM, PPM-DU, Comment, Power cut, New run
Extendable Options = Type
Required Attributes = Author, Type, Subject
Page Title = ELOG - $subject
;Sort Attributes = Author, Type
Quick filter = Date, Type, Author
Resubmit default = 2
Reverse sort = 1
Menu commands = List, New, Edit, Reply, Duplicate, Find, Config, Help, Logout
Preset on first reply Subject = Re: $Subject
Preset on reply author =

Hi,

we're using elog to handle various logbooks. It's a great tool by the way. 
While replacing the Win32 2.7.8 Release with Release 3.1.4-2, we ran into the 
following problem.

Since elog is for internal usage only, we allow users to self-register if they 
are new. Therefore  "Self register = 1" is set in the [global]-area.

Using the Win32-Release of elog, it worked fine while using Release 2.7.8 or 
2.8.0. Starting with Release 3.x everytime you try do add a user, the following 
error occurs:

      Error: Command "config" is not allowed for user ""

No matter if the user self-registers or is added by an elog-admin-user. We 
tried various 3.x Releases from 3.1.0-1 up to the latest 3.1.4-2. 
The error-message remains the same. Curious, although an error-message occurs, 
the user is added and able to use all logbooks. We also ran elogd in 
Debug-Mode (-v3), but the output didn't give a clue.

By the way using the same configuration on a linux-based installation (Debian 
and RaspiOS) self-registration works smooth. No error-message occurs.

So what could be the problem? Any suggestion is greatly appreciated.

Thanks in advance. 

Hello Sir,

        I'v been a long time user fo Elog for about 14 years.  We use it for indexing our Zoning Board of Adjustment Meeting Minutes for Decision on Properties within the Town of Hampton.  Is it possibel to by-pass the SMTP mailer for building logins and password changes.   We are a small network where we deal wiht the customer face to face in reseting password and builing new users.  Having the user reset them selves doesn't happen and normally we just take a ticket and do the task for them. 

We are building a new user and take we have not done in 10 years.  In those ten years the decsion was made to The Town onto Office 365 E3 GCC  and remove the ole mail server.  Now I'm finding impossible to build a new user or reset a password without SMTP support.

Thank you in advance.