Upgrade to 2.6.4 broke quick search, posted by T. Ribbrock on Tue Mar 6 16:59:13 2007
|
Hi!
I just went from 2.6.1 to 2.6.4 and since the upgrade, the quick search drop-down menus no longer work. I can select an attribute, but when I do so, I only get an empty page with the following message:
Attachment #0 of entry #0 not found
Please use your browser's back button to go back
When I do go back, the attribute I selected is still selected, but all entries are listed. With 2.6.1, this worked like a charm.
Any idea?
Thanks in advance,
Thomas |
Re: Upgrade to 2.6.4 broke quick search, posted by T. Ribbrock on Tue Mar 6 17:03:43 2007
|
| T. Ribbrock wrote: |
[...]
I just went from 2.6.1 to 2.6.4 and since the upgrade, the quick search drop-down menus no longer work. I can select an attribute, but when I do so, I only get an empty page with the following message:
Attachment #0 of entry #0 not found
Please use your browser's back button to go back [...]
|
Apparently, this must have been some session-oddity - I just logged out and got an error message about a bad URL. I then went to the base URL of the logbook (i.e. http://server:8080), chose the correct logbook and logged in again. Things work fine since. No idea what went wrong the first time round... 
Regards,
Thomas |
Conditional Email Notification by a text file, posted by An Thai on Thu Nov 2 14:34:36 2006
|
Hello,
I try to email by using a email text file to reduce the admin work.
- MOptions Team = EUROPE, ASIA, AFRICA, AMERICA
- Email Team EUROPE = $shell(type C:\EuropeEmailList.txt)
but i get always Email sent to Shell execution not enabled via -x flag
Is this feature not supported by ELOG or did i use the wrong syntax?
Thank you in advance. |
Re: Conditional Email Notification by a text file, posted by Steve Jones on Thu Nov 2 23:16:11 2006
|
| An Thai wrote: | Hello,
I try to email by using a email text file to reduce the admin work.
- MOptions Team = EUROPE, ASIA, AFRICA, AMERICA
- Email Team EUROPE = $shell(type C:\EuropeEmailList.txt)
but i get always Email sent to Shell execution not enabled via -x flag
Is this feature not supported by ELOG or did i use the wrong syntax?
Thank you in advance. |
| Quote: | | You need to start elogd with the "-x" flag |
|
|
Re: Conditional Email Notification by a text file, posted by An Thai on Fri Nov 3 01:03:33 2006
|
| Steve Jones wrote: |
| An Thai wrote: | Hello,
I try to email by using a email text file to reduce the admin work.
- MOptions Team = EUROPE, ASIA, AFRICA, AMERICA
- Email Team EUROPE = $shell(type C:\EuropeEmailList.txt)
but i get always Email sent to Shell execution not enabled via -x flag
Is this feature not supported by ELOG or did i use the wrong syntax?
Thank you in advance. |
| Quote: | | You need to start elogd with the "-x" flag |
|
Yes, i did it. But the problem is still there.
I exactly tried 50 times by submit a new entry and got only 3 times passed. 47 another cases i got:
"Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
I run elogd -v and see:
"Email Team EUROPE to Shell execution not enable via -x flag" |
|
Re: Conditional Email Notification by a text file, posted by Steve Jones on Fri Nov 3 03:42:18 2006
|
| An Thai wrote: |
| Steve Jones wrote: |
| An Thai wrote: | Hello,
I try to email by using a email text file to reduce the admin work.
- MOptions Team = EUROPE, ASIA, AFRICA, AMERICA
- Email Team EUROPE = $shell(type C:\EuropeEmailList.txt)
but i get always Email sent to Shell execution not enabled via -x flag
Is this feature not supported by ELOG or did i use the wrong syntax?
Thank you in advance. |
| Quote: | | You need to start elogd with the "-x" flag |
|
Yes, i did it. But the problem is still there.
I exactly tried 50 times by submit a new entry and got only 3 times passed. 47 another cases i got:
"Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
I run elogd -v and see:
"Email Team EUROPE to Shell execution not enable via -x flag" |
| Steve Jones wrote: |
Well, it looks like you are getting the text "Shell execution not enable via -x flag" put into the EUROPE attribute then the email server is attempting to send email to the email address "Shell execution not enable via -x flag", which is clearly not a valid address thus the "Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
You need to run run "elogd -v -x" then look for the errors. You also might try a more simpler test like "Preset Team EUROPE = = $shell(type C:\EuropeEmailList.txt)" and then see what is returned. It makes it simpler and removes the email error from the equation.
|
|
|
Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Thu Nov 9 20:45:32 2006
|
| Steve Jones wrote: |
| An Thai wrote: |
| Steve Jones wrote: |
| An Thai wrote: | Hello,
I try to email by using a email text file to reduce the admin work.
- MOptions Team = EUROPE, ASIA, AFRICA, AMERICA
- Email Team EUROPE = $shell(type C:\EuropeEmailList.txt)
but i get always Email sent to Shell execution not enabled via -x flag
Is this feature not supported by ELOG or did i use the wrong syntax?
Thank you in advance. |
| Quote: | | You need to start elogd with the "-x" flag |
|
Yes, i did it. But the problem is still there.
I exactly tried 50 times by submit a new entry and got only 3 times passed. 47 another cases i got:
"Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
I run elogd -v and see:
"Email Team EUROPE to Shell execution not enable via -x flag" |
| Steve Jones wrote: |
Well, it looks like you are getting the text "Shell execution not enable via -x flag" put into the EUROPE attribute then the email server is attempting to send email to the email address "Shell execution not enable via -x flag", which is clearly not a valid address thus the "Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
You need to run run "elogd -v -x" then look for the errors. You also might try a more simpler test like "Preset Team EUROPE = = $shell(type C:\EuropeEmailList.txt)" and then see what is returned. It makes it simpler and removes the email error from the equation.
|
|
That's a very interesting idea of setting up mailing lists I never thought about. I tried myself and it works fine. Just as Steve says run "elogd -v -x" to see what happens. Also make sure that EuropeEmailList.txt contains only a single line with comma-separated email addresses, just as you would enter them in the config file. |
|
Re: Conditional Email Notification by a text file, posted by An Thai on Thu Nov 9 23:25:15 2006
|
| Stefan Ritt wrote: |
| Steve Jones wrote: |
| An Thai wrote: |
| Steve Jones wrote: |
| An Thai wrote: | Hello,
I try to email by using a email text file to reduce the admin work.
- MOptions Team = EUROPE, ASIA, AFRICA, AMERICA
- Email Team EUROPE = $shell(type C:\EuropeEmailList.txt)
but i get always Email sent to Shell execution not enabled via -x flag
Is this feature not supported by ELOG or did i use the wrong syntax?
Thank you in advance. |
| Quote: | | You need to start elogd with the "-x" flag |
|
Yes, i did it. But the problem is still there.
I exactly tried 50 times by submit a new entry and got only 3 times passed. 47 another cases i got:
"Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
I run elogd -v and see:
"Email Team EUROPE to Shell execution not enable via -x flag" |
| Steve Jones wrote: |
Well, it looks like you are getting the text "Shell execution not enable via -x flag" put into the EUROPE attribute then the email server is attempting to send email to the email address "Shell execution not enable via -x flag", which is clearly not a valid address thus the "Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
You need to run run "elogd -v -x" then look for the errors. You also might try a more simpler test like "Preset Team EUROPE = = $shell(type C:\EuropeEmailList.txt)" and then see what is returned. It makes it simpler and removes the email error from the equation.
|
|
That's a very interesting idea of setting up mailing lists I never thought about. I tried myself and it works fine. Just as Steve says run "elogd -v -x" to see what happens. Also make sure that EuropeEmailList.txt contains only a single line with comma-separated email addresses, just as you would enter them in the config file. |
I tested many times and find out the problem.
The first opening CMD and running "elogd -v -x". It works perfektly.
Close the CMD: It stops to work.
From this time point it never works again even I try to re-open CMD and run "elogd -v -x"
The computer must be rebooted to get it works. (The CMD for running elogd -x must be always opened !!!) |
|
Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Fri Nov 10 07:51:59 2006
|
| An Thai wrote: | I tested many times and find out the problem.
The first opening CMD and running "elogd -v -x". It works perfektly.
Close the CMD: It stops to work.
From this time point it never works again even I try to re-open CMD and run "elogd -v -x"
The computer must be rebooted to get it works. (The CMD for running elogd -x must be always opened !!!) |
You probably run two servers in parallel. If you install the standard windows package, an elogd service is created and started. If you open a command window and run elogd manually, you have it running twice, and you never know to which instance your browser connects to. So first start the server with net stop elogd and then open the command window and start elogd manually. |
|
Re: Conditional Email Notification by a text file, posted by Grant Jeffcote on Sat Nov 11 06:56:16 2006
|
Stefan, this is a great idea (thanks An).
I can't seem to get this working when Elogd is started as a service though?
Starting elogd (-x) manually works fine and with the -v switch I can see it is operating correctly but obviously the service option is preferred.
The service ("D:\ELOG\elogd.exe" -x -D -c "D:\ELOG\elogd.cfg") is starting correctly using the -x switch (as I use the shell command for other elog options) but it doesn't seem to send the mail.
Is this a 'feature' ;o)
Thx
| Stefan Ritt wrote: |
| An Thai wrote: | I tested many times and find out the problem.
The first opening CMD and running "elogd -v -x". It works perfektly.
Close the CMD: It stops to work.
From this time point it never works again even I try to re-open CMD and run "elogd -v -x"
The computer must be rebooted to get it works. (The CMD for running elogd -x must be always opened !!!) |
You probably run two servers in parallel. If you install the standard windows package, an elogd service is created and started. If you open a command window and run elogd manually, you have it running twice, and you never know to which instance your browser connects to. So first start the server with net stop elogd and then open the command window and start elogd manually. |
|
|
Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Sat Nov 11 18:36:44 2006
|
| Grant Jeffcote wrote: | I can't seem to get this working when Elogd is started as a service though?
Starting elogd (-x) manually works fine and with the -v switch I can see it is operating correctly but obviously the service option is preferred.
The service ("D:\ELOG\elogd.exe" -x -D -c "D:\ELOG\elogd.cfg") is starting correctly using the -x switch (as I use the shell command for other elog options) but it doesn't seem to send the mail.
Is this a 'feature' ;o) |
Sure 
But seriously, elogd cannot be started as a service under windows by opening a command window and executing above command line. Under windows, it has to be installed and run as a service, which is usually done by the installer. To change it, you do that by selecting My Computer, then right mouse click and Manage, then you select Serviced and Applications, then Services, then you will see the elogd service. A double click on it opens the corresponding properties, where you will find the command line, usually
"C:\Program Files\ELOG\elogd.exe" -D -c "C:\Program Files\ELOG\elogd.cfg"
Here you have to change the command line parameters to add the -x flag. Then you stop and restart the service. |
|
Re: Conditional Email Notification by a text file, posted by Grant Jeffcote on Sat Nov 11 18:48:48 2006
|
Thanks Stefan,
I understand that and the registry entry that I use (for the service) is what I had quoted below.
The problem I have is that when Elog is started as a service using the -x switch then the shell command using An's mail list suggestion does not work? Starting the elogd daemon manually (ie using the command prompt) does work.
I have other features within my configuration which use the 'execute new $shell' option which works perfectly so I know that the -x switch is functional within the service.
BR Grant
| Stefan Ritt wrote: |
| Grant Jeffcote wrote: | I can't seem to get this working when Elogd is started as a service though?
Starting elogd (-x) manually works fine and with the -v switch I can see it is operating correctly but obviously the service option is preferred.
The service ("D:\ELOG\elogd.exe" -x -D -c "D:\ELOG\elogd.cfg") is starting correctly using the -x switch (as I use the shell command for other elog options) but it doesn't seem to send the mail.
Is this a 'feature' ;o) |
Sure
But seriously, elogd cannot be started as a service under windows by opening a command window and executing above command line. Under windows, it has to be installed and run as a service, which is usually done by the installer. To change it, you do that by selecting My Computer, then right mouse click and Manage, then you select Serviced and Applications, then Services, then you will see the elogd service. A double click on it opens the corresponding properties, where you will find the command line, usually
"C:\Program Files\ELOG\elogd.exe" -D -c "C:\Program Files\ELOG\elogd.cfg"
Here you have to change the command line parameters to add the -x flag. Then you stop and restart the service. |
|
|
Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Sat Nov 11 18:54:59 2006
|
| Grant Jeffcote wrote: | | The problem I have is that when Elog is started as a service using the -x switch then the shell command using An's mail list suggestion does not work? Starting the elogd daemon manually (ie using the command prompt) does work. |
When elogd runs as a service, it needs all paths to be absolute, like having the full c:\dir\subdrir\.... Do you have this? What about file access permission? You can try to do a Preset text = <file> with your email list, to see if elogd can actually access this file at all. |
|
Re: Conditional Email Notification by a text file, posted by Grant Jeffcote on Sat Nov 11 21:31:33 2006
|
All paths are absolute and file permissions set to 'everyone'. 'Preset text' results in the contents of the text file being shown so access doesn't seem to be the problem here. Can you reproduce this?
Thx & rgrds
| Stefan Ritt wrote: |
| Grant Jeffcote wrote: | | The problem I have is that when Elog is started as a service using the -x switch then the shell command using An's mail list suggestion does not work? Starting the elogd daemon manually (ie using the command prompt) does work. |
When elogd runs as a service, it needs all paths to be absolute, like having the full c:\dir\subdrir\.... Do you have this? What about file access permission? You can try to do a Preset text = <file> with your email list, to see if elogd can actually access this file at all. |
|
|
Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Wed Nov 15 20:22:29 2006
|
| Grant Jeffcote wrote: | | Can you reproduce this? |
Yes, I get the same error. Shell substitution does not work when elogd is started as a service. This is a problem deep inside the service management of Windows and I do not know any solution for that. Sorry. |
|
Re: Conditional Email Notification by a text file, posted by An Thai on Thu Nov 16 14:07:32 2006
|
I have found the way to get it work properly.
- Open services management (Right click My Computer -> Manage -> Services & Applications -> Services)
- Change elogd statup type to Manual. ->> SORRY: It should be set to Disable !!!
- Create *.bat file in the folder ELOG with Notepad. Type elogd -x in the file.
- Create a Scheduled Task (Start -> Programs - Accessories - System Tools -> Scheduled Tasked). Run Add Scheduled Task . A Wizard will be openned.
- Click Next -> Browser -> open your ELOG folder and select your created *.bat -> select radio button "When my computer starts" -> Next -> type your admin password for the computer -> select Open advanced properties for this task when I click finish.
Good luck!
This setting has worked great since a month. |
|
Re: Conditional Email Notification by a text file, posted by An Thai on Thu Mar 1 15:27:31 2007
|
Dear All,
I have got very good feedback from my colleagues about Elog logbook which I have made at my work since October 2006. The tool is going to use improving.
At moment, I don't let Elog start as a service (deamon), but as an application (start from a *.bat file). Because I just want to enable of "elogd -x" for reading of email list in an external file. But this cause that Elog cannot be set to automatically restart after a crash. (As a service in Windows, you can set it restart immediatly after crash)
I don't find anywhere in the administrator's guide how I can set the option 'elogd -x' while installing Elog to get a service with '-x' option.
Do you know it?
Dear Stefan,
could you enable it for the install download file for Windows? |
|
Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Thu Mar 1 22:10:11 2007
|
| An Thai wrote: |
Dear Stefan,
could you enable it for the install download file for Windows? |
I tried, but it does not work. A windows service does not let you start a internal command line shell. No way. Use Linux  |
|
Re: Conditional Email Notification by a text file, posted by An Thai on Tue Mar 6 13:49:17 2007
|
Dear Stefan,
what i mean is that you maybe modify the setup file for Windows (elog-latest.exe) so that everybody can make change of -[options] while install Elog. I am not a Windows expert, but I think that a lot of software can be set or configurated at the first install time (For Example: Path destination, features avaible, ...)
Do you know if it is possible? |
|
Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Tue Mar 6 13:55:15 2007
|
| An Thai wrote: | Dear Stefan,
what i mean is that you maybe modify the setup file for Windows (elog-latest.exe) so that everybody can make change of -[options] while install Elog. I am not a Windows expert, but I think that a lot of software can be set or configurated at the first install time (For Example: Path destination, features avaible, ...)
Do you know if it is possible? |
I don't know how to set-up the scheduled tasks from the installation script. Furthermore, having a application constantly running is somehow unusual, and it will confuse normal people. To my knowledge, not many people use the -x option under Windows. These people how really need it are clever enough (like you) to set-up the batch file manually. |
Finding conditions in Search page., posted by Robert-Jan Schrijvers on Thu Mar 1 15:46:59 2007
|
Hi all,
My config file (a part of it) looks like this:
Options Locatie = Intern{a}, Extern{b}, Demo/Ontwikkel{c}, Hardware{d}, ---------------------, Anders
{a}Options Sessies = p-zis-pr1{1}, p-szh-pro{2}, p-dia-pro{3}, a-zis-ac1{1}, a-zis-ac2{2}, a-dia-acc{3}, ---------------------, Anders
{b} Options Sessies = FSC Pro{4}, FSC Acc{4}, Risc/Bus/Sms Pro{5}, Risc/Bus/Sms Acc{5}, ---------------------, Anders
{c} Options Sessies = BAO, BEH, BAOMPSO, BEHMPSO, Demonstrator, AFS, PTG, BSN, ---------------------, Anders
{d} Options Sessies = Wijziging, Storing
{1} Options Orgus = AZS, IZR, HPZ, iSOFT
{2} Options Orgus = VZL, Trombo, iSOFT
{3} Options Orgus = Diac, iSOFT
{4} Options Orgus = AMG, ZHH/Tergooi, ZNB
{5} Options Orgus = GOZL, MCA, MZG, SEH, SJD, ZGN
This is my question: when i use the "search/find" page and select the first drop down menu "Locatie", the next field "Sessies" will not be displayed (and all following fields either). On the other hand, when i create a new entry, it works perfect, select "Locatie", field "Sessies" displays his content and so on. I hope that someone can help me with this. |
|
Re: Finding conditions in Search page., posted by Stefan Ritt on Thu Mar 1 22:36:01 2007
|
| Robert-Jan Schrijvers wrote: | | This is my question: when i use the "search/find" page and select the first drop down menu "Locatie", the next field "Sessies" will not be displayed (and all following fields either). On the other hand, when i create a new entry, it works perfect, select "Locatie", field "Sessies" displays his content and so on. I hope that someone can help me with this. |
This was never meant to work like that. On the find page, conditional attributes are not evaluated for following reason: Assume you want to search for Orgus = ZGN. Currently you simply type ZGN in the Orgus field and you're done. With drop down lists, you first would have to select Locatie = extern, then Sessies = Risc/Bus/Sms Pro, and only then you could select Orgus = ZGN. That would require three steps. Technically it's however possible to implement what you want, but I would wait until more people request this. |
|
Re: Finding conditions in Search page., posted by Robert-Jan Schrijvers on Fri Mar 2 09:40:28 2007
|
| Stefan Ritt wrote: |
| Robert-Jan Schrijvers wrote: | | This is my question: when i use the "search/find" page and select the first drop down menu "Locatie", the next field "Sessies" will not be displayed (and all following fields either). On the other hand, when i create a new entry, it works perfect, select "Locatie", field "Sessies" displays his content and so on. I hope that someone can help me with this. |
This was never meant to work like that. On the find page, conditional attributes are not evaluated for following reason: Assume you want to search for Orgus = ZGN. Currently you simply type ZGN in the Orgus field and you're done. With drop down lists, you first would have to select Locatie = extern, then Sessies = Risc/Bus/Sms Pro, and only then you could select Orgus = ZGN. That would require three steps. Technically it's however possible to implement what you want, but I would wait until more people request this. |
Hi Stefan,
tnx for the quick reply/feedback, i'm just a newbee in eLog, but working with it is a nice challenge and gives much pleasure for me and my colleagues. Tnx again and have a nice weekend! |
Bug, posted by Robert-Jan Schrijvers on Thu Mar 1 15:55:52 2007
|
when i was editting my Admin file, by mistake i typed the next line:
[a}Options Sessies = p-zis-pr1{1}, p-szh-pro{2}, p-dia-pro{3}, a-zis-ac1{1}, a-zis-ac2{2}, a-dia-acc{3}, ---------------------, Anders
{b} Options Sessies = FSC Pro{4}, FSC Acc{4}, Risc/Bus/Sms Pro{5}, Risc/Bus/Sms Acc{5}, ---------------------, Anders
{c} Options Sessies = BAO, BEH, BAOMPSO, BEHMPSO, Demonstrator, AFS, PTG, BSN, ---------------------, Anders
{d} Options Sessies = Wijziging, Storing
the next thing happened was that eLog created a new log which wasn't editable at all, the only thing i could do was deleting it (i created a monster...;-)
The first line/rule with the [ become the title, all other entries in the Admin file were used as a new Admin file. |
|
Re: Bug, posted by Stefan Ritt on Thu Mar 1 22:19:22 2007
|
| Robert-Jan Schrijvers wrote: | when i was editting my Admin file, by mistake i typed the next line:
[a}Options Sessies = p-zis-pr1{1}, p-szh-pro{2}, p-dia-pro{3}, a-zis-ac1{1}, a-zis-ac2{2}, a-dia-acc{3}, ---------------------, Anders
{b} Options Sessies = FSC Pro{4}, FSC Acc{4}, Risc/Bus/Sms Pro{5}, Risc/Bus/Sms Acc{5}, ---------------------, Anders
{c} Options Sessies = BAO, BEH, BAOMPSO, BEHMPSO, Demonstrator, AFS, PTG, BSN, ---------------------, Anders
{d} Options Sessies = Wijziging, Storing
the next thing happened was that eLog created a new log which wasn't editable at all, the only thing i could do was deleting it (i created a monster...;-)
The first line/rule with the [ become the title, all other entries in the Admin file were used as a new Admin file. |
You shot yourself in the foot
I agree that a clever syntax check on the config file would be nice, but it's very hard to imagine how many mistakes humans (including myself) can do, I would probably never catch all possible wrong cases. Giving my limited time, I will more work on new features and kindly ask you to be a bit careful in what you enter. I'm absolutely sure you will never make this mistake again |
|
Simple table implemented in ELCode, posted by Stefan Ritt on Wed Feb 28 21:04:59 2007
|
Starting from SVN revision 1801, simple tables are supported in ELCode tags. One can now embed tables in elog entries like this:
[table border=3 cellpadding=10]
One | Two
|-
Three | Four
[/table]
which produces following table:
The syntax is explained in the ELCode help page. |
Hardcoded Path in Makefile, posted by Martin Killenberg on Tue Feb 20 18:41:31 2007
|
I tried to compile ELOG on Scientific Linux Cern 4.4 and found that make quits because uname is not located in /usr/bin (like it is hardcoded in the makefile) but in /bin.
Later I found that this is only the case in the svn version, in the "latest.tar.gz" from 2007/02/20 the path is /bin.
Why do you have the absolute path in the Makefile? uname should be in the default path on any system. (The same applies to "rm")
I also was confused that you only provide one rpm Package (except for debian) without mentioning for which distribution. You try to avoid dependencies, but the elogd is linked against the basic libraries libc and ld-linux, which might vary. |
|
Re: Hardcoded Path in Makefile, posted by Stefan Ritt on Tue Feb 20 21:10:28 2007
|
| Martin Killenberg wrote: | I tried to compile ELOG on Scientific Linux Cern 4.4 and found that make quits because uname is not located in /usr/bin (like it is hardcoded in the makefile) but in /bin.
Later I found that this is only the case in the svn version, in the "latest.tar.gz" from 2007/02/20 the path is /bin.
Why do you have the absolute path in the Makefile? uname should be in the default path on any system. (The same applies to "rm")
I also was confused that you only provide one rpm Package (except for debian) without mentioning for which distribution. You try to avoid dependencies, but the elogd is linked against the basic libraries libc and ld-linux, which might vary. |
Ups. The hard-coded /usr/uname somehow sneaked in from some temporary test. I removed it in the current SVN.
Indeed the RPM package I provide is built under Scientific Linux. The Debian port is done by someone else. Unfortunately I don't have ten boxes with all possible distributions laying around, so my possibilities are quite limited and I depend on third party help. If you want to contribute additional RPMs you are welcome. |
|
Required and {}, posted by bob on Wed Feb 14 16:46:27 2007
|
Hi,
I still have a question,
is it possible to use : Required and {}
here my program :"
.
{run} Required Attributes = Date evenement, Heure evenement, ...
{run} Show Attributes = Date evenement, Heure evenement, ...
.
.
.
{etuvage & ANS} Required Attributes = Date evenement, Heure evenement, ...
{etuvage & ANS} Show Attributes = Date evenement, Heure evenement, ...
"
generally, can one handle "Required" and "{}" or "{ , }", ...
in any case for me, that does not go
this is normal ??
Thanks
Bob |
|
Re: Required and {}, posted by Stefan Ritt on Fri Feb 16 17:19:30 2007
|
| bob wrote: | | generally, can one handle "Required" and "{}" or "{ , }", ... |
For simple configuration files, that should work. If I have for example:
Attributes = Author, Type, Category, Subject
Options Type = Routine{r}, Software Installation{s}, Problem Fixed{p}, Configuration, Other
{r} Required Attributes = Author
Then the attributes "Author" is only required if "Type" equals "Routine". |
|
Re: Required and {}, posted by bob on Mon Feb 19 20:46:39 2007
|
| Stefan Ritt wrote: |
| bob wrote: | | generally, can one handle "Required" and "{}" or "{ , }", ... |
For simple configuration files, that should work. If I have for example:
Attributes = Author, Type, Category, Subject
Options Type = Routine{r}, Software Installation{s}, Problem Fixed{p}, Configuration, Other
{r} Required Attributes = Author
Then the attributes "Author" is only required if "Type" equals "Routine". |
you are right, I try to re-examine my configuration and I will say to you |
|
Preset of a drop-down box entry with a "%" character, posted by Tobias Bagger on Sun Feb 18 10:51:13 2007
|
How do I preset a drop-down box entry which contains a % character?
I use following lines in the elogd.cfg:
Options list->ta = K - 0%, S - 10% (text a1), F - 20% (text a2)
Preset list->ta = K - 0%
The documentation says:
If a preset value is given for an attribute which has an options list, the preset value is selected in the drop down box by default.
But this doesn't work for me. I also tried
Preset list->ta = "K - 0%"
Preset list->ta = K - 0%%
Preset list->ta = K - 0\%
without success. What's the right way to do this?
Best regards
Tobias |
|
Re: Preset of a drop-down box entry with a "%" character, posted by Stefan Ritt on Mon Feb 19 11:29:03 2007
|
| Tobias Bagger wrote: | | How do I preset a drop-down box entry which contains a % character? |
The problem was that '%' is used in auto-generated preset tags like XYZ-%Y-%b-### (see documentation). I made the auto-generation a bit more clever such that it only tries to interprete any '%' if there is any '#'. The fix is in elog version 2.6.4. |
|