 Mon Feb 29 14:09:21 2016, Stefan Ritt, two DRS4 boards configuration with 2048 samples each
|
The multi-board mode has never been tested with 2048 samples, so is very likely not to work. I don't know yet how much work this will be to
fix, but I'm on a business trip the next three weeks and probably will only have time to look at it when I return.
Stefan |
|
Mon May 2 14:31:28 2016, Dmitry Hits, two DRS4 boards configuration with 2048 samples each
|
Hi Stefan
Any chance you have time to fix the software for multiboard configuration with 2048 samples each. I tried 5.0.5, but drsosc still shows
only half of the waveform. |
 Wed Nov 22 08:31:03 2017, chen wenjun , using of the DRS Command Line Interface 
|
Hello! I'm using DRS4 evaluation board V5 with the drs command line interface,but the mannal only explained the meaning of the command--"info".And
I can't get the hang of the use of other commands through "help",so is there anywhere can I learn more about other commands?Or I can only
learn it through the datasheet of DRS4 chip. |
|
Wed Nov 22 08:48:36 2017, Stefan Ritt, using of the DRS Command Line Interface
|
The command line interface is more a debugging tool for experts, and you are not supposed to use it except to test the connection to the evaluation board.
The programs for the user are the DRS Oscilloscope and the drs_exam.cpp example program to read out the board with your own program.
Stefan |
|
Wed Nov 22 08:58:33 2017, chen wenjun , using of the DRS Command Line Interface
|
OK!Thank you! One more question,when I use the Oscillocope ,I found that the actual speed is a constant value of 1.007G,how can change this speed.
Stefan
Ritt wrote:
The command line interface is more a debugging tool for experts, and |
|
Wed Nov 22 09:14:18 2017, Stefan Ritt, using of the DRS Command Line Interface
|
Remove the check mark from the "Lock" box and enter a different value in the sampling speed box and hit return.
chen
wenjun wrote:
OK!Thank you! One more question,when I use the Oscillocope ,I found |
|
Wed Nov 22 09:19:11 2017, chen wenjun , using of the DRS Command Line Interface
|
Thank you very much !! All my fault for I thought it too comlicated. Thank you sincerely!
Stefan
Ritt wrote:
Remove the check mark from the "Lock" box and enter a different |
|
Thu Jan 9 10:58:19 2014, Martin Petriska, v5 software with v4 board calibration
|
Hi
Question:
In v4 board, which channel has best calibration ? |
|
Thu Jan 9 11:02:46 2014, Stefan Ritt, v5 software with v4 board calibration
|
Martin Petriska wrote:
Hi |
|
Thu Dec 27 00:12:12 2012, Jinhong Wang, variation of sampling capacitors
|
Hi Stefan,
A quick question, what is the typical variation of the sampling capacitors in DRS4? Will this variation be significant to affect your sampling
result? |
|
Thu Dec 27 09:49:17 2012, Stefan Ritt, variation of sampling capacitors
|
Jinhong Wang wrote:
Hi Stefan, |
|
Thu Dec 27 18:15:14 2012, Jinhong Wang, variation of sampling capacitors
|
Stefan Ritt wrote:
|
|
Fri Feb 1 17:43:48 2013, Jinhong Wang, variation of sampling capacitors
|
Jinhong Wang wrote:
|
|
Tue Feb 5 14:38:35 2013, Stefan Ritt, variation of sampling capacitors
|
Jinhong Wang wrote:
Hi Dr. Stefan, |
|
Mon Apr 5 17:50:39 2010, Heejong Kim, version 1.2 evaluation board with firmware 13279?
|
Hi, Stefan,
I found that my collaborator bought 2 older version of evaluation board before.
They are the version 1.2 in plastics case with firmware
13191.
Can I upgrade the firmware from 13191 to 13279?
I'm wondering if the older version of evaluation board is working with firmware 13279.
Thanks,
Heejong
|
|
Wed Apr 14 16:34:28 2010, Stefan Ritt, version 1.2 evaluation board with firmware 13279?
|
Heejong Kim wrote:
Hi, Stefan,
I found that my collaborator bought 2 older version of evaluation board before.
They |
|
Sat Feb 4 11:59:26 2012, Zhongwei Du, what sort of detectors for physical experiment the DRS4 used?
|
Hello.
We are designing a waveform sampling board for Si strip array detector ,whose rise time is less than 10 ns, which makes we doubt whether the
DRS4 can do more accurate than traditional charge integral circuit for charge measuring. |
|
Mon Feb 6 08:15:38 2012, Stefan Ritt, what sort of detectors for physical experiment the DRS4 used?
|
Zhongwei Du wrote:
Hello. |
|
Wed Apr 16 03:22:43 2014, Wang , why is the first channel output error?
|
Hi,
|
|
Wed Apr 16 08:30:32 2014, Stefan Ritt, why is the first channel output error?
|
Wang wrote:
Hi, |