DRS4 Forum
  DRS4 Discussion Forum, Page 11 of 40  Not logged in ELOG logo
ID Date Author Subject Text Attachments
  596   Mon Apr 10 13:41:41 2017 Giovanni Brunidrs4 registers behaviourHej Stefan! Thank you for your answer!

Just to be sure to have understood
  595   Mon Apr 10 10:50:57 2017 Stefan Rittdrs4 registers behaviourUsing the RESET line to reset registers
is not a good idea since it can have some
bad side-effects. The READ SHIFT register
  594   Mon Apr 10 10:48:03 2017 Stefan RittDRS4 eval board v4 coincidence firmware changes for triger for short pulsesYou have to download the package for your
board, which then includes also the correct
firmware for your board. If you have a V4
  593   Mon Apr 10 08:50:11 2017 Giovanni Brunidrs4 registers behaviourHej everyone!
I have some questions regarding what
happens to some DRS registers in some scenarios:
  592   Wed Apr 5 12:40:16 2017 Martin PetriskaDRS4 eval board v4 coincidence firmware changes for triger for short pulsesI would like to implement fpga firmware
changes for DRS4 eval board v4 to put there
posibility for standard coincidence (for
  591   Wed Apr 5 12:28:28 2017 Stefan Rittdrscl doesn't find eval board but drsosc does (Windows 7)Two people report now this problem, while
this works fine at our lab. So I'm puzzled
right now.
  590   Tue Mar 28 21:53:12 2017 Jim Freemandrscl doesn't find eval board but drsosc does (Windows 7)I cannot find the EVAL board using drscl
version 5.06 while the drsosc works fine.
I tried 2 different eval boards and 2 different
  589   Fri Feb 24 18:35:38 2017 Stefan RittPassing parameters to drsclThis is indeed currently not implemented.
But there is a simple C program drs_exam.cpp,
which connects to a board and safes some
  588   Fri Feb 24 17:34:28 2017 Tarik ZenginPassing parameters to drsclHi everyone,

I wonder if there is a way to pass
parameters to drscl. What I specifically
  587   Tue Jan 31 08:40:04 2017 Stefan RittLLD and ULD discriminations,Not inside the board. Each channel has
a single discriminator. You can select to
trigger on a rising or falling edge, but
  586   Tue Jan 31 01:37:35 2017 VO HONG HAILLD and ULD discriminations,Dear Stefan,
 Is there any way to develop
LLD and ULD discrimination in DSR-4 evaluation
 Best regards,
  585   Mon Jan 30 16:37:33 2017 Stefan RittAND trigger problems In the evaluation board we use an ADCMP601
comparator, which has a setup and hold time
of 4.6 ns. So a pulse which exceeds the threshold
  584   Sat Jan 28 14:11:58 2017 Danny PetschkeAND trigger problems  Dear Stefan,

I have 2 identical pulses as a
splittet signal with an amplitude of 300mV.
  583   Fri Jan 13 13:50:10 2017 Stefan RittDRS software doesn't work under Windows XP SP3Can you try that executable under XP: https://www.dropbox.com/s/j1n09afhbmh0zzu/drsosc.exe?dl=0

  582   Fri Jan 13 13:16:09 2017 Stefan RittDRS software doesn't work under Windows XP SP3The error probably comes from the fact
that the drsosc.exe application is a 64-bit
application and cannot be executed under
  581   Fri Jan 13 12:58:22 2017 Gregor KrambergerDRS software doesn't work under Windows XP SP3Hi all

I have a problem with running the
DRSOSC under windows XP SP3. We have some
  580   Fri Dec 9 04:17:46 2016 Abhishek RajputPotential Incorrect Timing Calibration for DRS4 DataHello Stefan,

Many thanks for the explanations.
You've cleared my confusion in this matter.
  579   Fri Dec 2 16:47:37 2016 Stefan RittDRS4 InitiationNo, I can't think of anything else.
There is no intermediate addressing stage.
The only thing which sometimes happens is
  578   Fri Dec 2 15:32:52 2016 samridha kunwarDRS4 InitiationThanks for replying Stefan.

I was more so just concerned with
the steps in the firmware when I had asked.
  577   Wed Nov 30 19:05:24 2016 Stefan RittDRS4 InitiationUhh, there are 1000 things which might
be wrong. A bit like "my car is not
working, it makes strange noise". Without
ELOG V3.1.4-80633ba