 Fri Dec 14 10:07:14 2012, Evgeni, DRS-4 trigger
|
Evgeni wrote:
|
|
Fri Dec 14 10:07:54 2012, Evgeni, DRS-4 trigger
|
Stefan Ritt wrote:
|
 Thu Apr 9 11:46:33 2015, Felix Bachmair, DRSBoard::SetTriggerSource
|
Hi
I have a question about the function SetTriggerSource in the class DRSBoard (DRS.h/DRS.cpp)
In the implementation there is the following comment: |
Sat May 23 11:03:20 2015, Felix Bachmair, Issue with Trigger rates below ~100Hz 
|
Hi
We are working with the DRS 4 V5 version and we investigated an issue with the trigger at rates below ~120 Hz.
As long as we have a trigger rate of more than 125 Hz. everything seems to work fine and we are recording more or less all events. |
|
Tue May 26 11:27:27 2015, Felix Bachmair, DRS4 firmware UCF constraints
|
> > Hello, I'm using two DRS4 rev.5 boards for 8ch readout and triggering.
> >
> > I needed to modify the trigger logic and implement some tweaks in the firmware, and noticed that
|
|
Fri Jun 5 13:15:35 2015, Felix Bachmair, DRS4 firmware UCF constraints
|
Hi Stefan,
No we only use one evaluation board. We use the evaluation board as a part of our beam test setup. It includes a telescope based on the current PSI46V2.1
CMS Pixel chip and a trigger logic board for triggering the telescope and the evaluation board. This includes a
|
|
Thu Jul 2 08:53:17 2015, Felix Bachmair, Issue with Trigger rates below ~100Hz
|
Hi,
We did a further investigation of this problem:
We figured out that this issue seems to be related to the kernel. |
|
Thu Jul 2 13:20:51 2015, Felix Bachmair, Creation of Object files
|
HI,
We are using the DRS4 Board in the EUDAQ framework [1]. We wrote a a Producer based on the software of the evaluation board, which is using the
DRS class/header/src files. |
|
Mon Jul 6 11:30:56 2015, Felix Bachmair, Creation of Object files
|
Hi Stefan,
That's fine for me. I thought it might be interesting for others as well..
Cheers |
|
Tue Jul 7 09:29:21 2015, Felix Bachmair, Creation of Object files
|
Yes of course no problem.
You can download via github https://github.com/veloxid/DRS4-v5-shared and I
also put it in the attachment. |
|
Fri Aug 7 20:32:15 2015, Felix Bachmair, DRS4
|
Hi
Did you copy the udev rule 41-drs.rules into /etc/udev/rules.d/ ?
Which operating system are you using? |
|
Sat Apr 2 11:21:10 2016, Felix Bachmair, Question about timimng calibration
|
Hi,
I am trying to understand some details about the timing calibration.
We wrote our own code but we more or less use the ideas of the Oscilloscope class. |
|
Wed Feb 27 13:47:32 2013, Georg Winner, Chip Test - Cell Error
|
When starting Chip Test in DRS Command Line Interface, I receive the following message:
Cell error on channel 1, cell 5: -154.4 mV instead 0 mV
|
|
Mon Mar 25 11:12:53 2013, Georg Winner, Differences in Source Code
|
I have noticed some differences in the source code between Windows (4.0.0) and Linux (4.0.1) Version.
drs_exam.cpp: In the windows version when setting the trigger there is no part "if (b->GetBoardType() == 8) {...} else {...}" like
in Linux version. So under Windows drs_exam does not start readout of DRS 4 Evalutation Board V4, because it does not get the trigger, under linux the |
|
Sun Sep 23 02:22:46 2018, Gerard Arino-Estrada, Trigger OUT pulse width variable from 100 us up to 100 ms
|
Hello Stefan,
I am using the DRS4 board connected to a Raspberry PI and through the drsosc application. I am interested on using the "Trigger OUT"
signal to do some extra data processing with NIM modules. According to the manual, for each hardware trigger a TTL pulse of 150 ns width should be send |
|
Wed Sep 26 18:25:07 2018, Gerard Arino-Estrada, Trigger OUT pulse width variable from 100 us up to 100 ms
|
Thank you very much for the answer, I really appreciate your help.
Thanks!
Gerard |
|
Wed Sep 26 18:28:20 2018, Gerard Arino-Estrada, Trigger OUT pulse width variable from 100 us up to 100 ms
|
Thank you very much for the answer, I really appreciate your help.
Thanks!
Gerard |
|
Fri Nov 18 16:38:42 2016, Gerard Montarou, LabView
|
Hello,
Did you start to write some VI to interface DRS4board with labview ?
i also have in mind to do that.I am surprised that nobody alraedy did it since there is no answer toyour question |
|
Mon Apr 10 08:50:11 2017, Giovanni Bruni, drs4 registers behaviour
|
Hej everyone!
I have some questions regarding what happens to some DRS registers in some scenarios:
1. How are the registers affected by a RESET? According to the data sheet all the CONFIG REGISTER bits are initilialized to 1. But what about the |
|
Mon Apr 10 13:41:41 2017, Giovanni Bruni, drs4 registers behaviour
|
Hej Stefan! Thank you for your answer!
Just to be sure to have understood properly:
1. Using the RESET line should be avoided. And in any case, the CONFIG register and the WRITE SHIFT register need to be initialized "by hand" |