| ID |
Date |
Author |
Subject |
Text |
 |
|
335
|
Tue Apr 15 18:35:41 2014 |
Carlo Stella | drs_exam project fail to compile | Hi,
when I try to compile drs_exam project
my computer give me this output: |
|
|
337
|
Wed Apr 16 08:20:36 2014 |
Stefan Ritt | drs_exam project fail to compile |
|
|
|
341
|
Thu Apr 24 23:03:25 2014 |
Carlo Stella | drs_exam project fail to compile |
|
|
|
756
|
Tue Jun 25 23:04:29 2019 |
Si Xie | drs_exam is always reading out a sin wave | We are using the drs_exam.cpp to read out
waveforms, but it seems to be outputting
only sin waves on all channels - as if it |
|
|
757
|
Wed Jun 26 13:08:42 2019 |
Stefan Ritt | drs_exam is always reading out a sin wave | Sure, that’s correct. The example
program turns on the internal sine wave generator
in case people don’t have a real signal. |
|
|
758
|
Wed Jun 26 15:10:09 2019 |
Si Xie | drs_exam is always reading out a sin wave | I see. Where is the code that we can use
to turn off the generator? I thought the
example is taking data with CH1 as the trigger. |
|
|
760
|
Mon Jul 8 14:29:12 2019 |
Stefan Ritt | drs_exam is always reading out a sin wave | Actually in the original drs_exam.cpp the
sine wave oscillator is turned off with this
command |
|
|
593
|
Mon Apr 10 08:50:11 2017 |
Giovanni Bruni | drs4 registers behaviour | Hej everyone!
I have some questions regarding what
happens to some DRS registers in some scenarios: |
|
|
595
|
Mon Apr 10 10:50:57 2017 |
Stefan Ritt | drs4 registers behaviour | Using the RESET line to reset registers
is not a good idea since it can have some
bad side-effects. The READ SHIFT register |
|
|
596
|
Mon Apr 10 13:41:41 2017 |
Giovanni Bruni | drs4 registers behaviour | Hej Stefan! Thank you for your answer!
Just to be sure to have understood
properly: |
|
|
597
|
Mon Apr 10 14:05:17 2017 |
Stefan Ritt | drs4 registers behaviour | 1. WRITE SHIFT register and CONFIG registers
are initialized to "1" on power
up, but if you want to change that, use A0-A3 |
|
|
598
|
Tue Apr 11 09:07:33 2017 |
Giovanni Bruni | drs4 registers behaviour | Thank you Stefan for replying!
I have still the RESET issue in mind:
how would you suggest to reset properly the |
|
|
599
|
Tue Apr 11 09:41:44 2017 |
Stefan Ritt | drs4 registers behaviour | What I do is the following: Have the RESET
input unconnected. When you power up, this
makes an internal reset during the power |
|
|
807
|
Wed Jan 20 12:14:49 2021 |
Taegyu Lee | drs4 persistence | Dear all,
I have a question about the function that
drs4 can perform. |
|
|
808
|
Wed Jan 20 17:37:51 2021 |
Stefan Ritt | drs4 persistence | The chip itself can only sample a single
waveform, that must be done in the attached
software. The current DRSOscilloscope software |
|
|
397
|
Fri Feb 13 10:12:16 2015 |
Andrzej Grzeszczuk | drs4 and root | Hello,
I compiled base file for drs system
(DRS.cpp) to root framework (root.cern.ch) |
|
|
805
|
Thu Dec 17 09:29:43 2020 |
Alex Myczko | drs sources on github? | Are there plans to add the drs software to
github? (asking because I have users @ethz.ch
that want to use it on debian,
|
|
|
806
|
Thu Dec 17 11:31:34 2020 |
Stefan Ritt | drs sources on github? | Not github, but bitbucket: https://bitbucket.org/ritt/drs4eb/src/master/
But development kind of stalled, so there |
|
|
433
|
Thu Jun 18 17:33:05 2015 |
Gregor Kramberger | drs 5.03 and windows 8.1 | I have problems with driver installation
on windows 8.1 (software version 5.03).
I have sen that that has been an issue before |
|
|
434
|
Fri Jun 19 12:32:10 2015 |
Gregor Kramberger | drs 5.03 and windows 8.1 |
|
|