Expiration of ELOG forum accounts, posted by Stefan Ritt on Fri Sep 9 12:54:13 2011
|
Dear ELOG users,
the ELOG discussion forum at PSI contains in meantime many old accounts with non-functional
email addresses. Since this causes some overhead, it has been decided to clean up the current account database. In order to keep your account alive, please |
Password may not contain blanks, posted by Terry Shuck on Tue Aug 30 20:58:18 2011
|
After setting up email addresses for notifications I noticed that the "Full Name" has part of an email address in it. I've tried several ways
to correct this however it keeps sending me to a page that says "Password may not contain blanks" and I've not done anything with the password.
Can you tell me how to correct this issue? |
Re: Password may not contain blanks, posted by Stefan Ritt on Wed Aug 31 15:21:03 2011
|
Terry Shuck wrote:
After setting up email addresses for notifications I noticed that the "Full Name" has part |
Re: Password may not contain blanks, posted by Terry Shuck on Wed Aug 31 16:21:23 2011 
|
Stefan Ritt wrote:
|
|
Re: Password may not contain blanks, posted by Stefan Ritt on Wed Aug 31 16:33:39 2011
|
Terry Shuck wrote:
|
|
Re: Password may not contain blanks, posted by Terry Shuck on Wed Aug 31 17:02:40 2011
|
Stefan Ritt wrote:
|
|
Re: Password may not contain blanks, posted by Stefan Ritt on Wed Sep 7 12:17:44 2011
|
Terry Shuck wrote:
Anyway if I have to wipe out ELOG and start over to have admin capabilities again, do all of my logbooks |
|
Re: Password may not contain blanks, posted by Stefan Ritt on Wed Sep 7 12:37:38 2011
|
Terry Shuck wrote:
Can you tell me how to stop elogd? I've edited that file several times however when I open ELOG in my |
|
Re: Password may not contain blanks, posted by Andreas Luedeke on Tue Sep 6 12:15:54 2011
|
Stefan Ritt wrote:
|
Re: Password may not contain blanks, posted by Terry Shuck on Wed Sep 7 16:23:01 2011
|
Andreas Luedeke wrote:
|
|
Attachments (again), posted by David Pilgram on Wed Aug 31 14:00:17 2011
|
OK, so no-one has ideas as per my question in elog:67088.
Looking at the issue from another angle.
|
|
Re: Attachments (again), posted by Andreas Luedeke on Wed Aug 31 15:00:11 2011
|
> In my case the original .pdf file is elsewhere, I've no need to have duplicates scatted in various logbooks, and
> while ideally
that would also be true of the thumbnail, it is fair enough for this to be stored in each logbook
> where it is required. This removes
the issue of how to have an attachment in a different logbook (other than by
> links, which would get rather tiresome to have to keep making).
>
> |
|
Re: Attachments (again), posted by Stefan Ritt on Wed Aug 31 15:13:02 2011
|
Andreas Luedeke wrote:
> In my case the original .pdf file is elsewhere, I've no need to have duplicates scatted in various |
|
Re: Attachments (again), posted by David Pilgram on Wed Aug 31 15:29:32 2011
|
Hi Stefan,
>Sure, but that works only from a hidden logbook into a public one, not the other way, but I think this is what
|
|
Re: Attachments (again), posted by David Pilgram on Wed Aug 31 15:20:48 2011
|
Hi Andreas,
>Of course the attachment has to be in the public logbook and the link in the hidden one.
|
|
Re: Attachments (again), posted by Andreas Luedeke on Tue Sep 6 12:00:13 2011
|
> I wondered if there had been some flag for the config file whereby the original file for attachment was
> processed by ImageMagick, but not stored, only the .png file(s) stored - or rather, some other way that achieved
> the same end. as there is no such flag at present.
|
|
Re: Attachments (again), posted by David Pilgram on Tue Sep 6 12:39:39 2011
|
> > I wondered if there had been some flag for the config file whereby the original file for attachment was
> > processed by ImageMagick, but not stored, only the .png file(s) stored - or rather, some other way that achieved
> > the same end. as there is no such flag at present.
|
SEGV after upgrade from 2.7.8 to 2.9.0, posted by Kester Habermann on Mon Aug 15 11:36:02 2011
|
Hello,
We've been using ELOG 2.6.5 to 2.7.8 for 4 years without any major problems.
Recently we upgraded to version 2.9.0 and since we've had the daemon frequently crash with SEGV. |
|
Hyperlinking address to Google Maps, posted by Alan Grant on Tue Aug 2 22:58:37 2011
|
I have a street address attribute called Ticket Location which I would like to hyperlink to google maps so I can see a map representation of the
actual value. For example, the value "654 Pembina" on the List page shoud be inserted into the url such that it displays http://maps.google.com/?q=654 Pembina, winnipeg when the browser window opens. This url works |
|
Re: Hyperlinking address to Google Maps, posted by Alan Grant on Wed Aug 3 17:55:41 2011
|
Alan Grant wrote:
|
|
Elog client usage, posted by Alan Grant on Fri Jul 22 00:05:02 2011
|
I have searched the Elog forum and docs at length for actual examples of how to use the Elog client and I apologize if I missed it somehwere
but could someone please provide some actual examples of how the parmeters are used? I haven't had much success setting it up just going by the
Elog command syntax quide. |
Re: Elog client usage, posted by Andreas Luedeke on Fri Jul 22 10:31:27 2011
|
Alan Grant wrote:
I have searched the Elog forum and docs at length for actual examples of how to use the Elog |
|
Re: Elog client usage, posted by Alan Grant on Tue Jul 26 21:50:05 2011
|
Andreas Luedeke wrote:
|
|
Re: Elog client usage, posted by Andreas Luedeke on Wed Jul 27 04:36:40 2011
|
Alan Grant wrote:
|
|
Re: Elog client usage, posted by Alan Grant on Tue Aug 2 21:36:20 2011
|
Andreas Luedeke wrote:
|
|
present Text, posted by Juergen Lupke on Tue Aug 2 13:55:06 2011
|
I have define a MOption BACKUP = Server, Switch, Router any now i link to use the Status of the Backup Option to display diffrent html file in
the Text field, i the a posible way to do this ?
sample: |
|
List page displays internal 'Text' attribute header with some alias, posted by Zbigniew Reszela on Wed Jul 20 16:52:06 2011
|
I would like to have different header for 'Text' internal attribute: e.g. an alias "Notes". So on the list page header of Text attribute column
is Notes.
Is it already possible? I couldn't find it in Administrator's Guide. |
|
Re: List page displays internal 'Text' attribute header with some alias, posted by Stefan Ritt on Wed Jul 20 17:39:25 2011
|
Zbigniew Reszela wrote:
I would like to have different header for 'Text' internal attribute: e.g. an alias "Notes". |