 Mon Jun 10 14:09:13 2013, tmiron alon, add an average ability to the Scope
|
Stefan Ritt wrote:
|
|
Mon Jun 10 16:24:21 2013, Stefan Ritt, add an average ability to the Scope
|
tmiron alon wrote:
|
|
Thu Jul 4 08:32:11 2013, tmiron alon, add an average ability to the Scope
|
Stefan Ritt wrote:
|
|
Thu Jul 4 08:54:25 2013, Stefan Ritt, add an average ability to the Scope
|
tmiron alon wrote:
|
|
Thu Jul 4 09:07:24 2013, tmiron alon, add an average ability to the Scope
|
Stefan Ritt wrote:
|
|
Thu Jul 4 09:17:31 2013, Stefan Ritt, add an average ability to the Scope
|
tmiron alon wrote:
|
|
Thu Jul 4 10:01:06 2013, tmiron alon, add an average ability to the Scope
|
Stefan Ritt wrote:
|
|
Thu Jul 4 10:14:32 2013, Stefan Ritt, add an average ability to the Scope
|
tmiron alon wrote:
|
|
Tue Jul 16 10:02:28 2013, tmiron alon, add an average ability to the Scope
|
Stefan Ritt wrote:
|
|
Tue Jul 16 16:25:43 2013, Stefan Ritt, add an average ability to the Scope
|
tmiron alon wrote:
Hi Stefan. |
|
Sun Jul 28 09:52:25 2013, tmiron alon, add an average ability to the Scope
|
Stefan Ritt wrote:
|
|
Mon Jul 29 06:04:45 2013, Stefan Ritt, add an average ability to the Scope
|
Hi satefan,
I did some debug on the DRSOsc program and saw that everywhere you used the function "IsBusy()", you used it with "SoftTrigger()", |
|
Mon Aug 12 15:08:17 2013, tmiron alon, add an average ability to the Scope
|
Stefan Ritt wrote:
|
|
Mon Aug 12 22:18:39 2013, Stefan Ritt, add an average ability to the Scope
|
tmiron alon wrote:
Right now I'm trying to speed up the number of wavefrom per second. I'm using your drs_exam.cpp |
 Sat Jul 5 04:36:13 2025, Sandeep Godiyal, Wrong Firmware Version: board has 13279, required is 15147. Board may not work properly 
|
I am using DRS4 Evaluation Board Rev.: 2.0.. Command Line interface: "drscl" detecting the board with message: Found DRS4 board
0 on USB, serial #2034, firmware revision 13279, also info command also working.
In "drsosc" interface: Getting this message: Wrong Firmware Version: board has 13279, required is 15147. Board may |
|
Mon Jul 7 16:53:26 2025, Stefan Ritt, Wrong Firmware Version: board has 13279, required is 15147. Board may not work properly
|
You have to use the software belonging to that board. You cannot use the newest software with an old board. Look here:
https://www.psi.ch/en/ltp-muon-physics/software-download
So you need teh software version 2.0. |
|
Sun Mar 6 17:54:47 2022, Matias Senger, Why does not trigger at higher sampling frequencies?
|
I have connected 3 signals to the DRS4 Evaluation Board V5 which look like this in the drsosc app:
Note that here I am sampling at 5 GS/s. Using this app everything works perfect. |
|
Mon Mar 7 08:45:32 2022, Stefan Ritt, Why does not trigger at higher sampling frequencies?
|
Unfortunately I have not idea what the problem could be. In principle the trigger should be independent of the sampling speed, since the trigger is only
made with a discriminator and a flip-flop. The hardware must be ok since you see the trigger with the oscillocope app. All you can do is to go through
the sorce code of the oscilloscope app, especially drsosc/Osic.cpp::ScanBoards(), SetTriggerLevel(), SetTriggerPolariy() etc. to make sure you do the same |
|
Tue Mar 8 00:25:56 2022, Matias Senger, Why does not trigger at higher sampling frequencies?
|
I have seen in the app that the trigger source buttons do something different than the "or" and "transparent trigger" buttons:
If I enable the setup from the right, i.e. OR in CH4 and "Enable Transparent Trigger" the app stops triggering. This is the configuration |
|
Tue Mar 8 12:20:00 2022, Matias Senger, Why does not trigger at higher sampling frequencies?
|
Sorry for the spam. Just want to let you know that I was able to solve the problem, it was all due to a `float` being casted as `int` in the Python binding.
Now it works like a charm.
Matias |