| ID |
Date |
Author |
Subject |
Text |
 |
|
874
|
Mon Mar 7 16:37:54 2022 |
Stefan Ritt | Scaler issue to evaluate live time | I tried your measurement with the DRSOscilloscope
app (see below), and I measure a constant
difference of 10 Hz among the whole range |
|
|
773
|
Fri Sep 13 15:27:41 2019 |
Arseny Rybnikov | Scaler / How to modify the firmware to change the scaler integration time | Hello,
We want to use the inner DRS4 counter(scaler)
within more than the 100ms integration |
|
|
454
|
Thu Nov 26 18:59:27 2015 |
Robert Adams | Saving histogram data | I would really love to be able to save
histogram data, though I have not been able
to do this. I could take a screenshot and |
|
|
477
|
Tue Feb 16 11:21:43 2016 |
Stefan Ritt | Saving histogram data | There is no histogram save functoinality
in ther DRSOscilloscope program - on purpose.
The board and the software are meant to evaluate |
|
|
478
|
Tue Feb 16 11:55:54 2016 |
Martin Petriska | Saving histogram data |
|
|
|
731
|
Sat Feb 2 00:13:12 2019 |
Hans Steiger | Saving Rate (only 15Acq/s) | Dear All,
when I use my Evaluation Board |
|
|
732
|
Sat Feb 2 10:10:22 2019 |
Stefan Ritt | Saving Rate (only 15Acq/s) | The reduction of rate is because you save
in XML format, which is an ASCII format,
so human readable, but takes long to write. |
|
|
360
|
Wed Jul 30 11:38:58 2014 |
Tsutomu Nagayoshi | Sampling speed of DRS4 Board ver4 | Hello!
I have a question concerning the
sampling speed of the DRS4 evaluation board. |
|
|
294
|
Mon Sep 23 09:22:52 2013 |
Andrzej Rychter | Sampling Frequency: DRS4 eval board | Is it possible to set sampling frequency
at 100 MHz in DRS4 eval board? Trying to
set 0.1GHz in Osci program results in around |
|
|
295
|
Mon Sep 23 09:26:56 2013 |
Stefan Ritt | Sampling Frequency: DRS4 eval board |
|
|
|
296
|
Mon Sep 23 09:51:48 2013 |
Andrzej Rychter | Sampling Frequency: DRS4 eval board |
|
|
|
666
|
Wed Mar 7 22:49:38 2018 |
Rodrigo Trindade de Menezes | Running drs_example.cpp | Hello,
We have been using the DRS4 evaluation
board (S/N 2636) that works with the scope |
|
|
667
|
Thu Mar 8 22:54:20 2018 |
Rodrigo Trindade de Menezes | Running drs_example.cpp | We found a way to solve the previous problem,
but right now when we try to set the input
range only -0.5 to 0.5 is working. When we |
|
|
674
|
Mon Mar 19 15:12:02 2018 |
Stefan Ritt | Running drs_example.cpp | The time channel is already calibrated
in ns. So for 5 GSPS, the time scale goes
from zero to 200. Concerning your other issues |
|
|
688
|
Fri May 4 12:11:57 2018 |
Stefan Ritt | Running drs_example.cpp | And here is the second part of your answer:
When you change the input range, you have
to redo the voltage calibration. Best is |
|
|
759
|
Wed Jun 26 15:17:51 2019 |
Si Xie | Running drs_example.cpp | Hi Rodrigo, I'm wondering how you solved
your original triggering problem. We are
also having trouble with collecting data |
|
|
398
|
Mon Mar 16 16:07:39 2015 |
Hermann-Josef Mathes | Running 2 instances of a DRS DAQ program | Hi,
we want to run two instances of
our little DRS DAQ program but obviously |
|
|
399
|
Tue Mar 17 02:53:26 2015 |
Stefan Ritt | Running 2 instances of a DRS DAQ program | I never had in mind running two systems
in parallel, that's why the code claims
all interfaces when started. You have to |
|
|
400
|
Thu Mar 19 07:37:52 2015 |
Daniel Stricker-Shaver | Running 2 instances of a DRS DAQ program | I don't know if it helps, but we measured
the time resolution between two independendly
running v3 boards using a single PC (latest |
|
|
5
|
Mon Feb 23 09:24:24 2009 |
Stefan Ritt | Rise-time measurements | Many applications using the DRS4 need to
measure fast rising signals, like for PMTs
or MCPs. This short note shows the minimal |
|