| ID |
Date |
Author |
Subject |
Text |
 |
|
683
|
Wed May 2 10:44:17 2018 |
Alessio Berti | Peak at 0 mV in traces | Hi,
we modified drs_exam.cpp to read
all 4 channels from the DRS4 and apply directly |
|
|
684
|
Wed May 2 12:12:42 2018 |
Stefan Ritt | Peak at 0 mV in traces | I note that your peak at zero is exactly
twice as high as the bins left and right,
so this looks to me like a binning problem |
|
|
685
|
Wed May 2 12:23:16 2018 |
Alessio Berti | Peak at 0 mV in traces | Hi,
thank you for the quick reply.
All the bins in the previous histograms have |
|
|
686
|
Fri May 4 11:35:20 2018 |
Stefan Ritt | Peak at 0 mV in traces | I tried the following:
- trigger on a 10 MHz sine wave
on CH0, CH1 was open |
|
|
691
|
Tue May 8 12:15:54 2018 |
Alessio Berti | Peak at 0 mV in traces | Hi Stefan,
following your example, we tried
to perform the same measurement, using drs_exam |
|
|
692
|
Tue May 8 14:43:03 2018 |
Stefan Ritt | Peak at 0 mV in traces | The DRS chip is read out with a 12 bit
ADC, thus the phyical resolution is roughly
1V/4096 = 0.24 mV. I say roughly since the |
|
|
588
|
Fri Feb 24 17:34:28 2017 |
Tarik Zengin | Passing parameters to drscl | Hi everyone,
I wonder if there is a way to pass
parameters to drscl. What I specifically |
|
|
589
|
Fri Feb 24 18:35:38 2017 |
Stefan Ritt | Passing parameters to drscl | This is indeed currently not implemented.
But there is a simple C program drs_exam.cpp,
which connects to a board and safes some |
|
|
37
|
Sat Feb 20 01:56:05 2010 |
Hao Huan | PLLLCK signal of DRS4 | Hi Stefan,
in the latest
DRS4 datasheet I only saw your data of the |
|
|
38
|
Sat Feb 20 09:54:48 2010 |
Stefan Ritt | PLLLCK signal of DRS4 |
|
|
|
39
|
Sun Feb 21 00:46:01 2010 |
Hao Huan | PLLLCK signal of DRS4 |
|
|
|
41
|
Sun Feb 21 13:47:03 2010 |
Stefan Ritt | PLLLCK signal of DRS4 |
|
|
|
42
|
Sun Feb 21 20:27:46 2010 |
Hao Huan | PLLLCK signal of DRS4 |
|
|
|
43
|
Sun Feb 21 20:33:57 2010 |
Stefan Ritt | PLLLCK signal of DRS4 |
|
|
|
44
|
Mon Feb 22 17:23:59 2010 |
Hao Huan | PLLLCK signal of DRS4 |
|
|
|
45
|
Wed Mar 3 14:37:40 2010 |
Stefan Ritt | PLLLCK signal of DRS4 |
|
|
|
567
|
Thu Nov 24 00:40:38 2016 |
Alexey Lubinets | PLL did not lock | Hello, everybody!
I installed DRSosc and DRScl. Command
line works normally (at least, it can "see" |
|
|
568
|
Thu Nov 24 08:13:23 2016 |
Stefan Ritt | PLL did not lock | Which serial number has the board? Has
it been in use before or is it a new board?
Stefan |
|
|
570
|
Mon Nov 28 16:48:15 2016 |
Alexey Lubinets | PLL did not lock | The serial number is 2586. This board is
about two years old, and it might be in use
(but I do not know exactly). |
|
|
571
|
Mon Nov 28 16:52:38 2016 |
Stefan Ritt | PLL did not lock | Have you tried to unplug and re-plug the
board a few times? According to our database,
you should have three boards. Do all three |
|