DRS4 Forum
  DRS4 Discussion Forum, Page 2 of 45  Not logged in ELOG logo
 Find |  Login |  Help 
 Full | Summary | Threaded  Show only new entries   899 Entries 
Goto page Previous  1, 2, 3 ... 43, 44, 45   Next  
ID Date Author Subjectdown Text Attachments
  520   Mon May 2 14:31:28 2016 Dmitry Hitstwo DRS4 boards configuration with 2048 samples eachHi Stefan

Any chance you have time to fix
the software for multiboard configuration		   
  158   Tue Mar 20 16:23:33 2012 Martin Petriskatriger for measuring time between pulses in channels I have two BaF2 detectors with PMT
connected to Ch1 and Ch2. At this time Im
using external triger module to start DRS4.		   
  159   Tue Mar 20 16:33:50 2012 Stefan Ritttriger for measuring time between pulses in channels

    

       
            		   
  160   Wed Mar 21 09:33:00 2012 Martin Petriskatriger for measuring time between pulses in channels

    

       
            		   
  161   Wed Mar 21 09:39:33 2012 Stefan Ritttriger for measuring time between pulses in channels

    

       
            		   
  164   Wed Jun 20 10:40:21 2012 Ivan Petrovtriger for measuring time between pulses in channels

    

       
            		   
  165   Wed Jun 20 12:45:05 2012 Stefan Ritttriger for measuring time between pulses in channels

    

       
            		   
  166   Wed Jun 20 14:36:01 2012 Ivan Petrovtriger for measuring time between pulses in channels

    

       
            		   
  167   Wed Jun 20 14:44:38 2012 Stefan Ritttriger for measuring time between pulses in channels

    

       
            		   
  168   Sat Jun 23 00:29:52 2012 Andrey Kuznetsovtriger for measuring time between pulses in channels

    

       
            		   
  169   Mon Jun 25 14:21:13 2012 Stefan Ritttriger for measuring time between pulses in channels

    

       
            		   
  412   Wed May 13 09:31:18 2015 Chenfei Yangtransparent-mode voltageHello Mr. Stefan Ritt

  For DRS4 differential inputs
ranges form 500mV to 1100mV, with ROFS set		  tek00000_.png 
  413   Wed May 13 09:45:51 2015 Stefan Ritttransparent-mode voltageThe ROFS signal has no effect in the transparent
mode, so you have to adjust O_OFS between
sampling and transparent mode accordingly.		   
  414   Wed May 13 09:55:09 2015 Chenfei Yangtransparent-mode voltageHere's the problem. My external ADC
has 2Vpp differtial input voltage range.
And the common-mode voltage of the inputs		   
  415   Wed May 13 10:16:40 2015 Stefan Ritttransparent-mode voltageI see your point. Actually I will soon
have the same issue since we design right
now a board with an AD9637 using the transparent		   
  416   Wed May 13 10:27:43 2015 Chenfei Yangtransparent-mode voltageI'm using an AD9252, 0.9V common mode
voltage is suggested and I already use 8
un-switchable level shifters. Just as you		   
  417   Wed May 13 12:34:49 2015 Stefan Ritttransparent-mode voltageThere might be a solution. How do you bias
th input of the
DRS4 chip? If you use a scheme as described		   
  418   Wed May 13 12:52:22 2015 Chenfei Yangtransparent-mode voltageYes. I use exactly the same scheme as you
mentioned. I'll try your solution.

  
  419   Wed May 13 16:13:07 2015 Chenfei Yangtransparent-mode voltageIf using a ROFS of 0.9V, the input would
not between 1.05V~2.05V better non-linearity
area. Is that appropriate?		   
  420   Wed May 13 16:25:24 2015 Stefan Ritttransparent-mode voltageTo get the good linearity, you need indeed
ROFS = 1.05V. With a O-OFS of 0.9V, a zero
input signal would give you DRS_OUT+=1.05V		   
Goto page Previous  1, 2, 3 ... 43, 44, 45   Next  
ELOG V3.1.5-3fb85fa6