| ID |
Date |
Author |
Subject |
Text |
 |
|
287
|
Tue Aug 27 16:14:49 2013 |
lengchongyang | | Hello everyone！I'm a
new user of DRS4 board,but it seems that |
|
|
288
|
Wed Aug 28 04:05:48 2013 |
lengchongyang | |
|
|
|
301
|
Wed Nov 6 16:35:42 2013 |
Stefan Ritt | |
|
|
|
484
|
Fri Mar 11 19:50:18 2016 |
Dominik Neise | | Hello Stefan,
I just stumbled again over a phrase
in the DRS4 datasheet I never really understood, |
|
|
486
|
Tue Mar 22 12:54:41 2016 |
Stefan Ritt | | Yes this is correct. But it is a sample-and-hold
circuit. So the sampling cell follows the
input for 3.2 ns, then samples and holds |
|
|
541
|
Thu Oct 6 15:23:18 2016 |
Will Flanagan | | Hi Stefan,
That is exactly what I'm looking
for. Thanks again! |
|
|
698
|
Thu Jun 7 16:27:21 2018 |
Phan Van Chuan | | Dear Stefan,
I am using an DRS4 board to test
the signal from an scintillator detector; |
|
|
699
|
Fri Jun 8 08:11:05 2018 |
Stefan Ritt | | Several people reported this problem, but
we cannot reproduce it at our lab. Both the
oscilloscope and the command line interface |
|
|
882
|
Tue Apr 12 10:40:36 2022 |
LynseyShun | | Hello, I am Lynsey. now I set A3-A0 to
1001 in ROI mode, but only OUT0 has output,
and the other seven channels(OUT1-OUT7) do |
|
|
883
|
Tue Apr 12 10:49:27 2022 |
Stefan Ritt | | A3-A0 = 1001 should be all you need to
activate OUT0-OUT7. It works in our designs.
Maybe double check the address lines with |
|
|
884
|
Thu Jun 16 05:31:25 2022 |
LynseyShun | | Thank you very much for your help!
|
|