 Fri Feb 22 11:56:57 2013, Stefan Ritt, DRS4 trigger, different polarity
|
Yury Golod wrote:
Normal
0
|
 Thu Dec 23 03:42:26 2021, Lynsey, DRS4 request assistance
|
Dear Sir or Madam,
Good morning，I am using drs4 chip, and the measured fDTAP == 1/350ns, that is, fDOMINO == 1 / 350ns * 2048 == 5.8GHz.
I have three questions: |
|
Mon Jan 3 17:13:41 2022, Stefan Ritt, DRS4 request assistance
|
1. fDOMINO is defined as fREFCLK * 2048
2. Good values can be derived from the evaluation board schematics: C1=4.7nF, C2=1nF, R=130 Ohm
3. A "1" means a logical high level. See Wikipedia: https://en.wikipedia.org/wiki/Logic_level |
|
Mon Apr 16 21:21:29 2018, Sobimpe Eniola, DRS4 read_binary.cpp
|
Hello everyone,
The new read_binary.cpp code
I will be very glad if anyone can help with the old version of read_binary.cpp code. The latest version I saw online was updated on June |
|
Tue Apr 17 13:28:23 2018, Stefan Ritt, DRS4 read_binary.cpp
|
On the software download page at https://www.psi.ch/drs/software-download you find a link to all versions of the DRS software, which is located
at: https://www.dropbox.com/sh/clqo7ekr0ysbrip/AACoWJzrQAbf3WiBJHG89bGGa?dl=0
Earch .tar.gz file has a date, which should help you find the correct version. |
|
Fri Apr 15 12:58:46 2016, Konstantin Gusev, DRS4 purchase information
|
Hi,
I can't contact with Anita Van Loon about DSR4 chip's price and delivery.
Did you still sell it? Can you provide me this information? |
|
Tue Apr 26 13:42:42 2016, Stefan Ritt, DRS4 purchase information
|
Just be patient. Anita is not at work this week.
Konstantin
Gusev wrote:
Hi, |
|
Mon Oct 17 16:29:37 2022, Sebastian Infante, DRS4 installation via tar in ubuntu not working
|
Hello i cant install any the last versions that i downloaded from the dropbox, i can untar the file called drs-5.0.6 and when i type "make"
while inside the extracted folder that starts working properly till a point and i get an error, its worth mention that i installed wxWidgets and could
make a simple hello world that worked properly in wxWidgets. |
|
Mon Feb 6 13:28:28 2023, Stefan Ritt, DRS4 installation via tar in ubuntu not working
|
I fixed the described error. Can you try the new version from https://bitbucket.org/ritt/drs4eb/commits/80b3af753ed32eb365725f0f3244a4109347c01b
Sebastian
Infante wrote:
Hello i cant install any the last versions that i downloaded from |
|
Wed May 8 19:50:01 2013, Andrey Kuznetsov, DRS4 installation on Windows 8 issues
|
I'm also having trouble installing drivers and running DRSOsc program on another computer running Windows 8.
The issue with the driver is that it's not digitally signed. |
|
Wed Jan 15 17:37:21 2014, Stefan Ritt, DRS4 installation on Windows 8 issues
|
Andrey Kuznetsov wrote:
I'm also having trouble installing drivers and running DRSOsc program |
|
Tue May 19 14:14:45 2015, Ilja Bekman, DRS4 firmware UCF constraints
|
Hello, I'm using two DRS4 rev.5 boards for 8ch readout and triggering.
I needed to modify the trigger logic and implement some tweaks in the firmware, and noticed that
|
Fri May 22 14:25:45 2015, Stefan Ritt, DRS4 firmware UCF constraints 
|
> Hello, I'm using two DRS4 rev.5 boards for 8ch readout and triggering.
>
> I needed to modify the trigger logic and implement some tweaks in the firmware, and noticed that
|
|
Tue May 26 11:27:27 2015, Felix Bachmair, DRS4 firmware UCF constraints
|
> > Hello, I'm using two DRS4 rev.5 boards for 8ch readout and triggering.
> >
> > I needed to modify the trigger logic and implement some tweaks in the firmware, and noticed that
|
|
Fri Jun 5 12:07:38 2015, Stefan Ritt, DRS4 firmware UCF constraints
|
I presume you have several evaluation boards and want to run them in sync, right?
This can be either made in daisy-chain mode (see manual page 25). In this case only the master board can trigger the slave boards. If you need to trigger |
|
Fri Jun 5 13:15:35 2015, Felix Bachmair, DRS4 firmware UCF constraints
|
Hi Stefan,
No we only use one evaluation board. We use the evaluation board as a part of our beam test setup. It includes a telescope based on the current PSI46V2.1
CMS Pixel chip and a trigger logic board for triggering the telescope and the evaluation board. This includes a
|
|
Fri Jun 5 13:29:55 2015, Stefan Ritt, DRS4 firmware UCF constraints
|
Do the following:
Use the TRG OUT of the evaluation board as a "busy". Only if this signal goes low (meaning that the readout of the board is complete and the board has |
|
Fri Jun 5 13:32:03 2015, Stefan Ritt, DRS4 firmware UCF constraints
|
Actually we should take this offline not to pester other DRS users which are not interested in this topic. Please call me directly (3728) at PSI.
/Stefan |
|
Thu Nov 1 20:08:33 2012, hongwei yang, DRS4 firmware
|
Hi,
We are using drs4 board, but oscilloscope app will somehow stop to work if we config trigger into "or and", When I
look into the drs4 firmware file drs4_eval3_app.vhd, I couldn't find the trigger_config value assignment which is mentioned at(#7 offset 0x1E from 31 downto |
|
Thu Nov 1 20:17:42 2012, Stefan Ritt, DRS4 firmware
|
hongwei yang wrote:
Hi, |