 Wed Mar 6 12:35:38 2013, Osip Lishilin, DRS4- analog pulse counting
|
Hello, Stefan. Have you implemented pulse counting yet?
Best, Osip. |
|
Wed Mar 6 12:37:14 2013, Stefan Ritt, DRS4- analog pulse counting
|
Osip Lishilin wrote:
Hello, Stefan. Have you implemented pulse counting yet? |
|
Mon May 20 08:42:16 2013, Osip Lishilin, DRS4- analog pulse counting
|
Stefan Ritt wrote:
|
|
Sat May 25 21:03:22 2013, Stefan Ritt, DRS4- analog pulse counting
|
Osip Lishilin wrote:
|
 Sun Aug 27 12:44:16 2017, Yuvaraj Elangovan, DRS4 version Support
|
| Hi i am using DRS4 Eval Board V2, How to acquire data to a bin file using it. |
|
Wed May 8 06:07:52 2013, Andrey Kuznetsov, DRS4 v2.0 Eval Board running on higher versions of DRS Oscilloscope program
|
Hi,
I have an old v2.0 board that I just upgraded firmware on using v4.0.0 download package which has a drs4_eval1.bit for v2.0 boards containing firmware
15158. So I would like to use the latest DRS Oscilloscope program, due to the faster acquisition speeds and advanced calibration techniques, however I |
|
Wed Jan 15 17:34:55 2014, Stefan Ritt, DRS4 v2.0 Eval Board running on higher versions of DRS Oscilloscope program
|
Andrey Kuznetsov wrote:
Hi, |
|
Tue May 1 02:00:40 2018, Hyunseong Kim, DRS4 using drs_exam.cpp to save as binary files
|
Hi,
I would like to save the waveform in a .dat binary file using drs_exam.cpp.
I know the distributed software allows us to save as binary files with the save button, but I currently need to save multiple runs using |
|
Wed May 2 09:24:53 2018, Stefan Ritt, DRS4 using drs_exam.cpp to save as binary files
|
You have to write the C/C++ code yourself to write data in binary or any other format. All information is present after the waveform readout in drs_exam.cpp,
so it's just a matter of proper write() functions. Please consult any C/C++ handbook on how to write to files.
Hyunseong |
|
Fri Feb 22 11:46:17 2013, Yury Golod, DRS4 trigger, different polarity
|
Normal
0
MicrosoftInternetExplorer4
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Обычная |
|
Fri Feb 22 11:56:57 2013, Stefan Ritt, DRS4 trigger, different polarity
|
Yury Golod wrote:
Normal
0
|
|
Thu Dec 23 03:42:26 2021, Lynsey, DRS4 request assistance
|
Dear Sir or Madam,
Good morning，I am using drs4 chip, and the measured fDTAP == 1/350ns, that is, fDOMINO == 1 / 350ns * 2048 == 5.8GHz.
I have three questions: |
|
Mon Jan 3 17:13:41 2022, Stefan Ritt, DRS4 request assistance
|
1. fDOMINO is defined as fREFCLK * 2048
2. Good values can be derived from the evaluation board schematics: C1=4.7nF, C2=1nF, R=130 Ohm
3. A "1" means a logical high level. See Wikipedia: https://en.wikipedia.org/wiki/Logic_level |
|
Mon Apr 16 21:21:29 2018, Sobimpe Eniola, DRS4 read_binary.cpp
|
Hello everyone,
The new read_binary.cpp code
I will be very glad if anyone can help with the old version of read_binary.cpp code. The latest version I saw online was updated on June |
|
Tue Apr 17 13:28:23 2018, Stefan Ritt, DRS4 read_binary.cpp
|
On the software download page at https://www.psi.ch/drs/software-download you find a link to all versions of the DRS software, which is located
at: https://www.dropbox.com/sh/clqo7ekr0ysbrip/AACoWJzrQAbf3WiBJHG89bGGa?dl=0
Earch .tar.gz file has a date, which should help you find the correct version. |
|
Fri Apr 15 12:58:46 2016, Konstantin Gusev, DRS4 purchase information
|
Hi,
I can't contact with Anita Van Loon about DSR4 chip's price and delivery.
Did you still sell it? Can you provide me this information? |
|
Tue Apr 26 13:42:42 2016, Stefan Ritt, DRS4 purchase information
|
Just be patient. Anita is not at work this week.
Konstantin
Gusev wrote:
Hi, |
|
Mon Oct 17 16:29:37 2022, Sebastian Infante, DRS4 installation via tar in ubuntu not working
|
Hello i cant install any the last versions that i downloaded from the dropbox, i can untar the file called drs-5.0.6 and when i type "make"
while inside the extracted folder that starts working properly till a point and i get an error, its worth mention that i installed wxWidgets and could
make a simple hello world that worked properly in wxWidgets. |
|
Mon Feb 6 13:28:28 2023, Stefan Ritt, DRS4 installation via tar in ubuntu not working
|
I fixed the described error. Can you try the new version from https://bitbucket.org/ritt/drs4eb/commits/80b3af753ed32eb365725f0f3244a4109347c01b
Sebastian
Infante wrote:
Hello i cant install any the last versions that i downloaded from |
|
Wed May 8 19:50:01 2013, Andrey Kuznetsov, DRS4 installation on Windows 8 issues
|
I'm also having trouble installing drivers and running DRSOsc program on another computer running Windows 8.
The issue with the driver is that it's not digitally signed. |