 Thu Nov 1 20:17:42 2012, Stefan Ritt, DRS4 firmware 
|
hongwei yang wrote:
Hi, |
|
Thu Nov 1 20:32:03 2012, Stefan Ritt, DRS4 firmware
|
hongwei yang wrote:
|
|
Tue Nov 13 11:26:32 2012, Stefan Ritt, GetWave
|
Martin Petriska wrote:
I have some question according to GetWave function. In drs_exam.cpp simple GetWave(0,0,wave_array[]) |
|
Wed Nov 21 08:38:26 2012, Stefan Ritt, Question for using Multi board
|
Gyuhee Kim wrote:
Hi. |
 Wed Nov 28 16:54:46 2012, Stefan Ritt, DRS Oscilloscope for Raspberry Pi and Mac OSX 10.8
|
I made a pre-compiled package for Mac OSX 10.8 (Mountain Lion), so one should be able to install the DRS Oscilloscope software with one mouse click on
a recent Mac.
The Makefile in the tar ball now also supports OSX 10.8, so one could even compile it from the sources on a Mac, after libusb-1.0 and wxWidgets |
|
Mon Dec 3 09:18:09 2012, Stefan Ritt, Another question about using multi boards.
|
Gyuhee Kim wrote:
Hi. |
|
Tue Dec 4 09:39:44 2012, Stefan Ritt, Question of drs4 using
|
Zhongwei Du wrote:
When Denable and Dwrite is high , the voltage of PLLOUT is 0 V. And the Dtap is turn high |
|
Tue Dec 4 09:55:43 2012, Stefan Ritt, Question of drs4 using
|
Zhongwei Du wrote:
|
|
Thu Dec 13 12:14:35 2012, Stefan Ritt, DRS-4 trigger
|
Evgeni wrote:
How to configure DRS oscilloscope for the oscillations with an amplitude greater than the value of the exposed |
|
Fri Dec 14 08:42:53 2012, Stefan Ritt, DRS-4 trigger
|
Evgeni wrote:
|
|
Fri Dec 14 21:49:29 2012, Stefan Ritt, EVM rev4 board trigger change and drs_example
|
Martin Petriska wrote:
I switched from rev 3 to rev 4 board, but have some problems with triggering, board is now waiting |
|
Thu Dec 27 09:49:17 2012, Stefan Ritt, variation of sampling capacitors
|
Jinhong Wang wrote:
Hi Stefan, |
|
Tue Feb 5 14:38:35 2013, Stefan Ritt, variation of sampling capacitors
|
Jinhong Wang wrote:
Hi Dr. Stefan, |
|
Wed Feb 13 17:03:53 2013, Stefan Ritt, Nonuniform sampling
|
Martin Petriska wrote:
Are there any plans to include reconstruction of nonuniform sampling in DRS4 to get uniformly |
|
Fri Feb 22 11:56:57 2013, Stefan Ritt, DRS4 trigger, different polarity
|
Yury Golod wrote:
Normal
0
|
|
Thu Feb 28 12:58:44 2013, Stefan Ritt, clock and trigger outs
|
> Hi,
> I am considering using the DRS4 evaluation board as an ADC card for the wire chamber in the physics lab (VP) experiment at ETH. However, the wire
> chamber has 8 outputs, so I would need to have two of such boards. Is it possible to synchronise them, online or offline? From the website, it looks |
|
Wed Mar 6 12:37:14 2013, Stefan Ritt, DRS4- analog pulse counting
|
Osip Lishilin wrote:
Hello, Stefan. Have you implemented pulse counting yet? |
|
Wed Mar 6 13:08:03 2013, Stefan Ritt, Chip Test - Cell Error
|
Georg Winner wrote:
When starting Chip Test in DRS Command Line Interface, I receive the following message: |
|
Thu Apr 4 11:21:04 2013, Stefan Ritt, Differences in Source Code
|
Georg Winner wrote:
I have noticed some differences in the source code between Windows (4.0.0) and Linux (4.0.1) Version. |
|
Thu Apr 4 11:32:21 2013, Stefan Ritt, cascading -- DRS4 Osci.cpp & DRS.cpp
|
Jill Russek wrote:
|