| ID |
Date |
Author |
Subject |
Text |
 |
|
586
|
Tue Jan 31 01:37:35 2017 |
VO HONG HAI | LLD and ULD discriminations, | Dear Stefan,
Is there any way to develop
LLD and ULD discrimination in DSR-4 evaluation
board?
Best regards,
V.H.Hai |
|
|
360
|
Wed Jul 30 11:38:58 2014 |
Tsutomu Nagayoshi | Sampling speed of DRS4 Board ver4 | Hello!
I have a question concerning the
sampling speed of the DRS4 evaluation board. |
|
|
651
|
Wed Jan 17 09:51:16 2018 |
Tran Cong Thien | The input signals recorded are different with the signal showed in oscilloscope | Dear Stefan,
I am using an DRS4 board to record
the signals from an plastic scintillator |
|
|
350
|
Thu May 29 04:22:43 2014 |
Toshihiro Nonaka | CalibrationWaveform | I'm writing the drs_exam.cpp to use multi-boards(v3,
firmware:4.0.0), and taking data succeeded.
But I have several questions about function |
|
|
514
|
Wed Apr 27 08:14:14 2016 |
Toshihiro Nonaka | serial number problem | Dear all,
I'm using 3 DRS boards simultaneously
and their serial numbers are 2169, 2170, |
|
|
516
|
Wed Apr 27 09:51:37 2016 |
Toshihiro Nonaka | serial number problem | The serial number has been fixed by
using drscl. Thank you！
|
|
|
623
|
Wed Jul 12 04:24:39 2017 |
Toshihiro Nonaka | Time resolution between boards | Hello,
I 'm using four evaluation
boards v.3 to construct the multi-board DAQ |
|
|
811
|
Fri Feb 26 17:05:26 2021 |
Tom Schneider | Trouble getting PLL to lock | Hello,
I am working on a custom PCB design
with the DRS4 chip, and I can't get the |
|
|
813
|
Fri Feb 26 18:33:52 2021 |
Tom Schneider | Trouble getting PLL to lock | Stefan,
Thanks for responding so quickly.
Yes I have my clock source going to REFCLK+ |
|
|
815
|
Fri Feb 26 21:24:39 2021 |
Tom Schneider | Trouble getting PLL to lock | Probe capacitance makes that tricky - if
I put my probe on DSPEED, I see that it starts
at approx. 2.5V then gradually decreases |
|
|
817
|
Fri Feb 26 22:52:13 2021 |
Tom Schneider | Trouble getting PLL to lock | Thats not a simple modification to my PCB,
but I'll give it a try. Thanks
for your help |
|
|
818
|
Thu Mar 4 21:36:14 2021 |
Tom Schneider | Trouble getting PLL to lock | I found the problem, and it had nothing
to do with the CMOS clock input. As
it turns out, even though I was using the |
|
|
858
|
Tue Jan 25 14:15:00 2022 |
Thomas M. | Regarding measuring for a set time | Hello,
I'm working on a project wherein
we're looking at photomultipliers. We've |
|
|
860
|
Tue Jan 25 14:44:49 2022 |
Thomas M. | Regarding measuring for a set time | Yes, you've got it exactly right. Thank
you, that helps a lot!
Thomas |
|
|
588
|
Fri Feb 24 17:34:28 2017 |
Tarik Zengin | Passing parameters to drscl | Hi everyone,
I wonder if there is a way to pass
parameters to drscl. What I specifically |
|
|
807
|
Wed Jan 20 12:14:49 2021 |
Taegyu Lee | drs4 persistence | Dear all,
I have a question about the function that
drs4 can perform. |
|
|
605
|
Sat Apr 15 03:48:31 2017 |
Strahinja Lukic | Wave rotation during transfer from the board? | I don't know if this question is already
documented elsewhere.
I am developing a DAQ code for |
|
|
607
|
Thu Apr 20 06:30:13 2017 |
Strahinja Lukic | Wave rotation during transfer from the board? | Thanks.
Strahinja
|
|
|
657
|
Tue Feb 27 13:17:00 2018 |
Steven Block | WIndows Connection problem with drs507 SOLVED | Hello All,
I too have been struggling with
trying to get the drs4 (507) to work on my |
|
|
659
|
Tue Feb 27 16:34:26 2018 |
Steven Block | DRS4 Dead times | Hello All,
I am currently trying to figure
out how to properly characterize the dead |
6x |