 Wed Apr 6 09:46:10 2016, Daniel Dribin, DRS Oscilloscope freezing after a long run
|
Martin Petriska
wrote:
Stefan |
 Fri Oct 12 14:06:04 2012, Moritz von Witzleben, DRS abbreviation
|
Hello,
what is the abbreviation of DRS?
Thanks and kind Regards, |
|
Fri Oct 12 14:09:37 2012, Stefan Ritt, DRS abbreviation
|
Moritz von Witzleben wrote:
Hello, |
Thu Jun 12 12:40:03 2014, Roman Gredig, DRS eval bord v5 Timing 
|
Dear Stefan
I have two questions concerning the best time resolution with the DRS V5 eval board.
|
|
Thu Jun 12 12:46:00 2014, Stefan Ritt, DRS eval bord v5 Timing
|
> a) Calibration:
> I am using 4 boards daisy chained. To achieve optimal time resolution I did first a voltage calibration and right afterwards a time calibration. For
all
|
|
Fri Jan 13 12:58:22 2017, Gregor Kramberger, DRS software doesn't work under Windows XP SP3
|
Hi all
I have a problem with running the DRSOSC under windows XP SP3. We have some hardware which is not supported under newer versions of windows and
we would like to use DRS boards along it, therefore we would higly appreciated any help in that direction. We have installed the software (V 5.03) to two |
|
Fri Jan 13 13:16:09 2017, Stefan Ritt, DRS software doesn't work under Windows XP SP3
|
The error probably comes from the fact that the drsosc.exe application is a 64-bit application and cannot be executed under XP any more. Unfortunately
XP is forbidden at our institute for security reasons, so I have no machine around where I could compile the executable fro XP. Another problem is the
libusb library used by drsosc.exe. Not sure if there is a XP version available any more. Have a look yourself at http://www.libusb.org/wiki/windows_backend |
|
Fri Jan 13 13:50:10 2017, Stefan Ritt, DRS software doesn't work under Windows XP SP3
|
Can you try that executable under XP: https://www.dropbox.com/s/j1n09afhbmh0zzu/drsosc.exe?dl=0
Gregor
Kramberger wrote:
Hi all |
|
Thu Feb 25 17:56:39 2021, Matthias Plum, DRS spike removal for multiple waveforms
|
Hi,
Is there a way that someone can help me and my student to enable RemoveSymmetricSpikes function in the drs_exam.cpp? We are not 100% sure
how to call the function if you want to read out four waveforms. |
|
Fri Feb 26 08:52:50 2021, Stefan Ritt, DRS spike removal for multiple waveforms
|
Just look at the definition of the function below, all parameters are explained there. In meantime we have a firmware fix to avoid the spikes inside
the chip, but I have not yet found time to update the evaluation board.
Stefan |
|
Thu Dec 13 12:03:29 2012, Evgeni, DRS-4 trigger
|
How to configure DRS oscilloscope for the oscillations with an amplitude greater than the value of the exposed
in the trigger (internal). |
|
Thu Dec 13 12:14:35 2012, Stefan Ritt, DRS-4 trigger
|
Evgeni wrote:
How to configure DRS oscilloscope for the oscillations with an amplitude greater than the value of the exposed |
|
Thu Dec 13 19:49:47 2012, Evgeni, DRS-4 trigger
|
Stefan Ritt wrote:
|
|
Fri Dec 14 08:42:53 2012, Stefan Ritt, DRS-4 trigger
|
Evgeni wrote:
|
|
Fri Dec 14 10:07:14 2012, Evgeni, DRS-4 trigger
|
Evgeni wrote:
|
|
Fri Dec 14 10:07:54 2012, Evgeni, DRS-4 trigger
|
Stefan Ritt wrote:
|
|
Tue Aug 28 17:52:45 2012, Zach Miller, DRS-4.0.0 DOScreen.cpp
|
Hi,
I found an old thread regarding a fix for DOScreen.cpp for DRS-3.1.0, that fixes an "ambiguous overload problem." Currently when I attempt
to build the drs-4.0.0, I get this similar error: |
|
Wed Aug 29 10:52:44 2012, Stefan Ritt, DRS-4.0.0 DOScreen.cpp
|
Zach Miller wrote:
Hi, |
|
Wed Aug 29 16:42:42 2012, Zach Miller, DRS-4.0.0 DOScreen.cpp
|
Stefan Ritt wrote:
|
|
Wed Aug 29 16:45:36 2012, Stefan Ritt, DRS-4.0.0 DOScreen.cpp
|
Zach Miller wrote:
|