ID |
Date |
Author |
Subject |
Text |
|
246
|
Tue May 21 12:39:00 2013 |
Enrico Conti | mac osx 10.6 | Hi,
I would like to use the DRS4 with my macbook |
|
247
|
Tue May 21 13:25:41 2013 |
Stefan Ritt | mac osx 10.6 | > Hi,
>
> I would like to use the DRS4 with my macbook |
|
248
|
Tue May 21 13:32:13 2013 |
Martin Petriska | mac osx 10.6 | > Hi,
>
> I would like to use the DRS4 with my macbook |
|
249
|
Tue May 21 17:45:05 2013 |
Enrico Conti | mac osx 10.6 | >
> Can it be that you have a old PowerPC MAC?
I have no experience with that, but probably |
|
250
|
Tue May 21 17:48:45 2013 |
Enrico Conti | mac osx 10.6 | >
> it looks like 64bit vs 32bit problem, you
have to compile all libraries for the same |
|
251
|
Tue May 21 17:51:09 2013 |
Stefan Ritt | mac osx 10.6 | > >
> > it looks like 64bit vs 32bit problem,
you have to compile all libraries for the |
|
252
|
Tue May 21 18:30:11 2013 |
Enrico Conti | mac osx 10.6 | > > >
> > > it looks like 64bit vs 32bit problem,
you have to compile all libraries for the |
|
253
|
Fri May 24 17:58:07 2013 |
Enrico Conti | mac osx 10.6 | > > >
> > > it looks like 64bit vs 32bit problem,
you have to compile all libraries for the |
|
254
|
Fri May 24 18:20:14 2013 |
Stefan Ritt | mac osx 10.6 | > I made some progress. Understood what was
wrong in the make phase. You have only to
add the option -arch i386 in the CFLAGS line |
|
255
|
Sat May 25 12:45:46 2013 |
Enrico Conti | mac osx 10.6 | > > I made some progress. Understood what
was wrong in the make phase. You have only
to add the option -arch i386 in the CFLAGS |
|
315
|
Tue Dec 10 14:48:42 2013 |
ismail okan atakisi | measurement range | I m trying to measure lifetime in our lab
and I intend to take
measurement with DRS4 at that point |
|
316
|
Tue Dec 10 14:54:46 2013 |
Stefan Ritt | measurement range |
|
|
737
|
Wed Feb 20 08:03:04 2019 |
Lev Pavlov | meg? | Hey. Strange problem. Why does the compiler
refer there at all? Library installed drsosc
works |
|
738
|
Wed Feb 20 08:08:42 2019 |
Stefan Ritt | meg? | You have to change the path to libusb-1.0.lib
to the one where you installed it.
Stefan |
|
739
|
Wed Feb 20 12:13:44 2019 |
Lev Pavlov | meg? | Great, drs_exam compiles without problems.
Now when you run the compiled file drs_exam
writes board not found, but drsosc and drscl |
|
740
|
Wed Feb 20 12:56:56 2019 |
Stefan Ritt | meg? | No idea. Maye some access problem. Have
you tried to start your program under an
admin account? |
|
749
|
Fri Apr 12 09:39:30 2019 |
Lev Pavlov | multi-board |
Good afternoon, I use 5 boards in
multi-mode, everything is connected according
to the instructions. Can I measure the phase |
|
750
|
Fri Apr 12 09:55:50 2019 |
Stefan Ritt | multi-board | Subtract 16 ns from your measured value
;-)
Stefan |
|
751
|
Fri Apr 12 09:59:15 2019 |
Lev Pavlov | multi-board |
I understand this, thanks. But
my Chief does not understand this, he wants |
|
752
|
Fri Apr 12 12:50:18 2019 |
Stefan Ritt | multi-board | If you have two signal going through two
cables, the cable have never the same length
(on a scale of picoseconds), and you have |
|