DRS4 Forum
  DRS4 Discussion Forum, Page 5 of 44  Not logged in ELOG logo
ID Date Authordown Subject Text Attachments
  586   Tue Jan 31 01:37:35 2017 VO HONG HAILLD and ULD discriminations,Dear Stefan,
 Is there any way to develop
LLD and ULD discrimination in DSR-4 evaluation
board?
 Best regards,
V.H.Hai
  
  360   Wed Jul 30 11:38:58 2014 Tsutomu NagayoshiSampling speed of DRS4 Board ver4 Hello!
I have a question concerning the
sampling speed of the DRS4 evaluation board.
  
  651   Wed Jan 17 09:51:16 2018 Tran Cong ThienThe input signals recorded are different with the signal showed in oscilloscope Dear Stefan,

I am using an DRS4 board to record
the signals from an plastic scintillator
  
  350   Thu May 29 04:22:43 2014 Toshihiro NonakaCalibrationWaveformI'm writing the drs_exam.cpp to use multi-boards(v3,
firmware:4.0.0), and taking data succeeded.
But I have several questions about function
 offset.png 
  514   Wed Apr 27 08:14:14 2016 Toshihiro Nonakaserial number problem Dear all,

I'm using 3 DRS boards simultaneously
and their serial numbers are 2169, 2170,
 serial.png 
  516   Wed Apr 27 09:51:37 2016 Toshihiro Nonakaserial number problem The serial number has been fixed by
using drscl. Thank you!

  
  623   Wed Jul 12 04:24:39 2017 Toshihiro NonakaTime resolution between boardsHello,

I 'm using four evaluation
boards v.3 to construct the multi-board DAQ
  
  811   Fri Feb 26 17:05:26 2021 Tom SchneiderTrouble getting PLL to lockHello,

I am working on a custom PCB design
with the DRS4 chip, and I can't get the
  
  813   Fri Feb 26 18:33:52 2021 Tom SchneiderTrouble getting PLL to lockStefan,

Thanks for responding so quickly. 
Yes I have my clock source going to REFCLK+
  
  815   Fri Feb 26 21:24:39 2021 Tom SchneiderTrouble getting PLL to lockProbe capacitance makes that tricky - if
I put my probe on DSPEED, I see that it starts
at approx. 2.5V then gradually decreases
  
  817   Fri Feb 26 22:52:13 2021 Tom SchneiderTrouble getting PLL to lockThats not a simple modification to my PCB,
but I'll give it a try.  Thanks
for your help
  
  818   Thu Mar 4 21:36:14 2021 Tom SchneiderTrouble getting PLL to lockI found the problem, and it had nothing
to do with the CMOS clock input.  As
it turns out, even though I was using the
  
  858   Tue Jan 25 14:15:00 2022 Thomas M.Regarding measuring for a set timeHello,

I'm working on a project wherein
we're looking at photomultipliers. We've
  
  860   Tue Jan 25 14:44:49 2022 Thomas M.Regarding measuring for a set timeYes, you've got it exactly right. Thank
you, that helps a lot! 

Thomas
  
  588   Fri Feb 24 17:34:28 2017 Tarik ZenginPassing parameters to drsclHi everyone,

I wonder if there is a way to pass
parameters to drscl. What I specifically
  
  807   Wed Jan 20 12:14:49 2021 Taegyu Leedrs4 persistenceDear all,

I have a question about the function that
drs4 can perform.
  
  605   Sat Apr 15 03:48:31 2017 Strahinja LukicWave rotation during transfer from the board?I don't know if this question is already
documented elsewhere.

I am developing a DAQ code for
  
  607   Thu Apr 20 06:30:13 2017 Strahinja LukicWave rotation during transfer from the board?Thanks.

Strahinja

  
  657   Tue Feb 27 13:17:00 2018 Steven BlockWIndows Connection problem with drs507 SOLVEDHello All,

I too have been struggling with
trying to get the drs4 (507) to work on my
  
  659   Tue Feb 27 16:34:26 2018 Steven BlockDRS4 Dead timesHello All,

I am currently trying to figure
out how to properly characterize the dead
 6x 
ELOG V3.1.4-bcd7b50