--#############################################################
-- Author   : Stefan Ritt
-- Contents : DRS4 Evaluation Board FPGA top level entity
-- $Id: drs4_eval4.vhd 13988 2009-08-03 15:28:19Z ritt $
--#############################################################

library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
use work.drs4_pack.all;

entity drs4_eval4 is
  port (
    -- Quartz
    P_I_CLK33                  : in  std_logic;
    P_I_CLK66                  : in  std_logic;
    
    -- Test points
    P_IO_J45                   : inout std_logic; 
    P_IO_J46                   : inout std_logic; 
    P_I_J47                    : in std_logic; 
    P_IO_J48                   : inout std_logic; 
    P_IO_J49                   : inout std_logic; 
    
    -- analog triggers
    P_I_ATRG1                  : in std_logic;
    P_I_ATRG2                  : in std_logic;
    P_I_ATRG3                  : in std_logic;
    P_I_ATRG4                  : in std_logic;
    
    -- external trigger
    P_IO_ETRG_IN               : inout std_logic;
    P_O_ETRG_IND               : out std_logic;

    P_IO_ETRG_OUT              : inout std_logic;
    P_O_ETRG_OUTD              : out std_logic;

    -- external (MMCX clock) clock
    P_IO_ECLK_IN               : inout std_logic;
    P_O_ECLK_IND               : out std_logic;
    P_IO_ECLK_OUT              : inout std_logic;
    P_O_ECLK_OUTD              : out std_logic;

    -- LEDs
    P_O_LED0                   : out std_logic; 
    P_O_LED1                   : out std_logic; 

    -- Lines to/from Cy7C68013A microcontroller
    P_IO_UC_SLOE               : inout std_logic;
    P_IO_UC_SLRD               : inout std_logic;
    P_IO_UC_SLWR               : inout std_logic;
    P_IO_UC_SLCS               : inout std_logic;
    P_IO_UC_PKTEND             : inout std_logic;
    P_IO_UC_FIFOADR0           : inout std_logic;
    P_IO_UC_FIFOADR1           : inout std_logic;
    P_IO_UC_FLAGA              : inout std_logic;
    P_IO_UC_FLAGB              : inout std_logic;
    P_IO_UC_FLAGC              : inout std_logic;
    P_I_UC_PA0                 : in    std_logic;
    
    P_IO_UC_FD                 : inout std_logic_vector(15 downto 0);

    -- PMC connector
    P_IO_PMC_USR               : inout std_logic_vector(63 downto 0)
);
end drs4_eval4;

architecture arch of drs4_eval4 is

  component usr_clocks
    port (
      P_I_CLK33                : in  std_logic; 
      P_I_CLK66                : in  std_logic; 
      O_CLK33                  : out std_logic; 
      O_CLK33_NODLL            : out std_logic; 
      O_CLK66                  : out std_logic; 
      O_CLK132                 : out std_logic; 
      O_CLK264                 : out std_logic; 
      I_PS_VALUE               : in std_logic_vector(7 downto 0);
      O_CLK_PS                 : out std_logic; 
      O_LOCKED                 : out std_logic;
      
      O_DEBUG1                 : out std_logic;
      O_DEBUG2                 : out std_logic
    );
  end component;

  component usb2_racc is
    port (
      -- Clock signals
      -- ------------------------
      I_RESET                  : in std_logic;
      I_CLK33                  : in std_logic;
      
      -- Lines to/from Cy7C68013A microcontroller
      -- -----------------------------------
      P_IO_UC_SLOE             : inout std_logic;
      P_IO_UC_SLRD             : inout std_logic;
      P_IO_UC_SLWR             : inout std_logic;
      P_IO_UC_SLCS             : inout std_logic;
      P_IO_UC_PKTEND           : inout std_logic;
      P_IO_UC_FIFOADR0         : inout std_logic;
      P_IO_UC_FIFOADR1         : inout std_logic;
      P_IO_UC_FLAGA            : inout std_logic;
      P_IO_UC_FLAGB            : inout std_logic;
      P_IO_UC_FLAGC            : inout std_logic;
      P_IO_UC_FD               : inout std_logic_vector(15 downto 0);

      -- Simple bus interface to on-chip RAM
      -- --------------------------------------------------
      O_LOCBUS_ADDR            : out std_logic_vector(31 downto 0);
      I_LOCBUS_D_RD            : in  std_logic_vector(31 downto 0);
      O_LOCBUS_D_WR            : out std_logic_vector(31 downto 0);
      O_LOCBUS_WE              : out std_logic;

      -- Status & control registers
      -----------------------------
      O_CONTROL_REG_ARR        : out type_control_reg_arr;
      I_STATUS_REG_ARR         : in type_status_reg_arr;

      O_CONTROL_TRIG_ARR       : out type_control_trig_arr;
      O_CONTROL0_BIT_TRIG_ARR  : out std_logic_vector(31 downto 0);

      -- Debug signals
      -- -------------
      O_DEBUG                  : out std_logic
    );
  end component;

  component usb_dpram is
    port (
      I_RESET                  : in  std_logic;                       
                                                                     
      I_CLK_A                  : in  std_logic;                       
      I_ADDR_A                 : in  std_logic_vector(31 downto 0);  
      I_WE_A                   : in  std_logic;                      
      O_D_RD_A                 : out std_logic_vector(31 downto 0);  
      I_D_WR_A                 : in  std_logic_vector(31 downto 0);   
                                                                     
      I_CLK_B                  : in  std_logic;                       
      I_ADDR_B                 : in  std_logic_vector(31 downto 0);  
      I_WE_B                   : in  std_logic;                      
      O_D_RD_B                 : out std_logic_vector(31 downto 0);  
      I_D_WR_B                 : in  std_logic_vector(31 downto 0)    

    );
  end component;

  component drs4_eval4_app is
    port (
    
      I_CLK33                  : in std_logic; -- 33 MHz, sychronised to clk33_nodll
      I_CLK66                  : in std_logic; -- 66 MHz, same phase as clk33
      I_CLK132                 : in std_logic; -- 132 MHz, random phase in respect to clk33
      I_CLK264                 : in std_logic; -- 264 MHz, random phase in respect to clk33
      O_CLK_PS_VALUE           : out std_logic_vector(7 downto 0); -- value for phase shift
      I_CLK_PS                 : in std_logic; -- phase shifted in respect to clk33
      I_RESET                  : in std_logic; -- active high power-up reset
  
      -- analog triggers
      I_ANA_TRG                : in std_logic_vector(3 downto 0);
    
      -- external trigger
      IO_ETRG_IN               : inout std_logic;
      O_ETRG_IND               : out std_logic;

      IO_ETRG_OUT              : inout std_logic;
      O_ETRG_OUTD              : out std_logic;

      -- external (MMCX clock) clock
      IO_ECLK_OUT              : inout std_logic;
      IO_ECLK_IN               : inout std_logic;
  
      -- PMC
      P_IO_PMC_USR             : inout std_logic_vector(63 downto 0);

      -- Simple bus interface to DPRAM
      O_DPRAM_CLK              : out std_logic;
      O_DPRAM_ADDR             : out std_logic_vector(31 downto 0);
      O_DPRAM_D_WR             : out std_logic_vector(31 downto 0);
      O_DPRAM_WE               : out std_logic;
      I_DPRAM_D_RD             : in std_logic_vector(31 downto 0);

      -- Control & status registers from system FPGA interface
      I_CONTROL_REG_ARR        : in  type_control_reg_arr;
      O_STATUS_REG_ARR         : out type_status_reg_arr;
      I_CONTROL_TRIG_ARR       : in  type_control_trig_arr;
      I_CONTROL0_BIT_TRIG_ARR  : in  std_logic_vector(31 downto 0);

      -- LEDs signals
      O_LED_RED                : out std_logic;
      O_LED_YELLOW             : out std_logic;
      
      -- Debug signals
      O_DEBUG1                 : out std_logic;
      O_DEBUG2                 : out std_logic
    );
  end component;

  signal VCC: std_logic;
  signal GND: std_logic;

  -- reset signal
  -- -------------
  signal global_reset          : std_logic;  -- active high power-up reset
  
  -- clocks & related signals
  -- ------------------------
  signal clk33_nodll           : std_logic; -- external 33 MHz clock (global clock net)
  signal clk33                 : std_logic; -- 33 MHz DLL output
  signal clk66                 : std_logic;
  signal clk132                : std_logic;
  signal clk264                : std_logic;
  signal clk_ps_value          : std_logic_vector(7 downto 0);
  signal clk_ps                : std_logic; -- special phase shifted clock
  signal usr_clks_dlls_locked  : std_logic; -- high if clock DLLs for clkxx have locked

  -- user application signals for Locbus interface
  -- ---------------------------------------------
  signal locbus_addr           : std_logic_vector(31 downto 0);
  signal locbus_d_rd           : std_logic_vector(31 downto 0);
  signal locbus_d_wr           : std_logic_vector(31 downto 0);
  signal locbus_we             : std_logic;

  -- user application signals for DPRAM interface
  -- --------------------------------------------
  signal dpram_clk             : std_logic;
  signal dpram_addr            : std_logic_vector(31 downto 0);
  signal dpram_we              : std_logic;
  signal dpram_d_wr            : std_logic_vector(31 downto 0);
  signal dpram_d_rd            : std_logic_vector(31 downto 0);

  -- register signals for data exchange with microcontroller
  -- -------------------------------------------------------
  signal control_reg_arr       : type_control_reg_arr;
  signal status_reg_arr        : type_status_reg_arr;

  signal control_trig_arr: type_control_trig_arr;
  signal control0_bit_trig_arr : std_logic_vector(31 downto 0);

  -- LEDs
  -- ----
  signal o_led_red             : std_logic;
  signal o_led_yellow          : std_logic;

  -- Trigger
  -- -------
  signal io_etrg_in            : std_logic;
  signal o_etrg_ind            : std_logic;
  signal io_etrg_out           : std_logic;
  signal o_etrg_outd           : std_logic;
  signal i_ana_trg             : std_logic_vector(3 downto 0);
  signal io_eclk_out           : std_logic;
  signal io_eclk_in            : std_logic;
  
  -- Debugging signals
  -- -----------------
  signal o_racc_debug          : std_logic;
  signal o_debug1              : std_logic;
  signal o_debug2              : std_logic;

begin
  VCC <= '1';
  GND <= '0';

  -- map LEDs
  P_O_LED0       <= o_led_yellow;
  P_O_LED1       <= o_led_red;
  
  -- debug outputs
  P_IO_J45       <= GND;
  P_IO_J46       <= GND;
  P_IO_J48       <= o_debug1;
  P_IO_J49       <= o_debug2;

  -- triggers
  i_ana_trg(0)   <= P_I_ATRG1;
  i_ana_trg(1)   <= P_I_ATRG2;
  i_ana_trg(2)   <= P_I_ATRG3;
  i_ana_trg(3)   <= P_I_ATRG4;

  io_etrg_in     <= P_IO_ETRG_IN;
  P_O_ETRG_IND   <= o_etrg_ind;
  P_IO_ETRG_OUT  <= io_etrg_out;
  P_O_ETRG_OUTD  <= o_etrg_outd;

  -- external clock
  P_IO_ECLK_OUT  <= io_eclk_out;
  P_O_ECLK_OUTD  <= '1';
  io_eclk_in     <= P_IO_ECLK_IN;
  P_O_ECLK_IND   <= '0';

  clocks : usr_clocks port map (
    P_I_CLK33                  => P_I_CLK33,
    P_I_CLK66                  => P_I_CLK66,
    O_CLK33                    => clk33,              
    O_CLK33_NODLL              => clk33_nodll,        
    O_CLK66                    => clk66,              
    O_CLK132                   => clk132,