Fri Feb 26 22:52:13 2021, Tom Schneider, Trouble getting PLL to lock
|
Thats not a simple modification to my PCB, but I'll give it a try. Thanks for your help
Stefan
Ritt wrote:
Sounds to me like your REFCLK is not getting through or your PLL loop |
Thu Mar 4 21:36:14 2021, Tom Schneider, Trouble getting PLL to lock
|
I found the problem, and it had nothing to do with the CMOS clock input. As it turns out, even though I was using the default state of the config
register, I still had to write to it after powerup. Once I did that, the PLL locked immediately.
-Tom |
Thu May 29 04:22:43 2014, Toshihiro Nonaka, CalibrationWaveform
|
I'm writing the drs_exam.cpp to use multi-boards(v3, firmware:4.0.0), and taking data succeeded. But I have several questions about function written
in DRS.cpp.
|
Wed Apr 27 08:14:14 2016, Toshihiro Nonaka, serial number problem
|
Dear all,
I'm using 3 DRS boards simultaneously and their serial numbers are 2169, 2170, 2172 respectively.
Recently however, I obtain serial number "0" by DRSBoard::GetBoardSerialNumber() for #2172 board. |
Wed Apr 27 09:51:37 2016, Toshihiro Nonaka, serial number problem
|
The serial number has been fixed by using drscl. Thank you!
Stefan
Ritt wrote:
If dis- and reconnecting the board does not help, there is the (small) |
Wed Jul 12 04:24:39 2017, Toshihiro Nonaka, Time resolution between boards
|
Hello,
I 'm using four evaluation boards v.3 to construct the multi-board DAQ system. One channel for each board is used as reference clock, then
calibrate timing offline, which allow below 10ps resolution between boards. |
Wed Jan 17 09:51:16 2018, Tran Cong Thien, The input signals recorded are different with the signal showed in oscilloscope
|
Dear Stefan,
I am using an DRS4 board to record the signals from an plastic scintillator detector. It was working really good, yet a few day ago the signals
became "not right". When I checked the signal using an oscilloscope it show the normal signals previously recorded. The signal amplitude |
Wed Jul 30 11:38:58 2014, Tsutomu Nagayoshi, Sampling speed of DRS4 Board ver4
|
Hello!
I have a question concerning the sampling speed of the DRS4 evaluation board.
It is written in the manual that the sampling speed of DRS4 Evaluation Board is supported above 0.7 GHz. |
Tue Jan 31 01:37:35 2017, VO HONG HAI, LLD and ULD discriminations,
|
Dear Stefan,
Is there any way to develop LLD and ULD discrimination in DSR-4 evaluation board?
Best regards,
V.H.Hai |
Tue Oct 17 14:58:58 2017, Vadym Denysenko, Time offset
|
Hello.
I have a simple question, can I set SetTriggerDelayNs() more than 1631 ns? |
Wed Oct 18 11:48:14 2017, Vadym Denysenko, Time offset
|
Thank you for your reply!
Stefan
Ritt wrote:
No this is not possible. But you can delay your signal externally (like |
Thu Jul 20 13:00:44 2017, Volodymyr Rodin, Driver installation on Windows 10
|
Dear Laura
You need to disable driver signature enforcement. Then try again with path option.
It helped me. |
Fri Jul 21 09:16:02 2017, Volodymyr Rodin, Time output
|
Hello Stefan
I tried to convert binary to a simple txt file and found next problem - strange time output.
Here is output from little modification for read_binary.cpp (Its last output line also is strange: dT = -1.#IOns +- -1.$ps) |
Tue Jul 25 14:47:05 2017, Volodymyr Rodin, Time output
|
Hi again.
Okay, it works with 5.05 version very good and it is enough for me.
Besides, |
Wed Apr 16 03:22:43 2014, Wang , why is the first channel output error?
|
Hi,
|
Thu Apr 17 12:02:28 2014, Wang , The first channel is wrong.
|
Hi,
I want to describe this phenomenon again. The diagram |
Tue Nov 3 22:37:56 2015, Will Flanagan, Latest macro for DRS4 V5
|
Hi DRS4 Experts,
I have an extremely naive question: Is there any official macro to unpack the DRS4 binary files? All I am looking to do is to plot a few of my
waveforms and manipulate them in root. I am using OSX 10.10 and ROOT 5.34. |
Tue Nov 3 23:15:38 2015, Will Flanagan, Latest macro for DRS4 V5
|
I should of course mention that I looked through the DRS4 website and didn't see anything obvious: https://www.psi.ch/drs/evaluation-board
Thanks,
Will |
Thu Nov 5 00:18:42 2015, Will Flanagan, Latest macro for DRS4 V5
|
Hi Stefan,
This is absolutely perfect.
Thanks, |
Wed Oct 5 22:43:29 2016, Will Flanagan, Timestamp for each DRS4 waveform
|
Hi DRS4 Experts,
I have been analyzing DRS4 binary data with scripts based on Stefan's (very helpful!) macro:
https://midas.psi.ch/elogs/DRS4+Forum/361 |