| ID |
Date |
Author |
Subject |
Text |
 |
|
406
|
Tue Apr 21 12:52:18 2015 |
Stefan Ritt | DRS4 Evaluation Board Baseline/Voltage Calibration | 1) I tried to cablirate a V5 board with
drsosc 5.0.3 and it just worked fine for
me. No idea what went wrong in your case. |
|
|
407
|
Tue Apr 21 13:03:38 2015 |
Daniel Stricker-Shaver | DRS4 Evaluation Board Baseline/Voltage Calibration | I also use Ubuntu 14.04 LTS and for my
V3 borad I have to use drsosc 4.x or ealier
to perform the calibration. |
|
|
408
|
Tue Apr 21 13:06:39 2015 |
Stefan Ritt | DRS4 Evaluation Board Baseline/Voltage Calibration | Sure, for a V3 board you need a pre-V5
software, but I assumed Julien had a V5 board.
|
|
|
334
|
Thu Apr 10 14:45:12 2014 |
Roman Gredig | DRS4 Evalboard V5 with Windows7Pro64bit |
Dear Stefan
|
|
|
339
|
Wed Apr 16 10:24:55 2014 |
Stefan Ritt | DRS4 Evalboard V5 with Windows7Pro64bit | >
> Dear Stefan
>
|
|
|
659
|
Tue Feb 27 16:34:26 2018 |
Steven Block | DRS4 Dead times | Hello All,
I am currently trying to figure
out how to properly characterize the dead |
6x |
|
660
|
Tue Feb 27 17:04:12 2018 |
Stefan Ritt | DRS4 Dead times | XML is very slow to write, and you are
probably limited by that. Switch to binary
mode, which is much faster. You will see |
|
|
661
|
Tue Feb 27 18:04:18 2018 |
Steven Block | DRS4 Dead times | That is extremely helpful! Many thanks.
One more question; If I were to take inputs
from 2 channels at once, would that scale |
|
|
662
|
Tue Feb 27 18:12:32 2018 |
Stefan Ritt | DRS4 Dead times | For applications which are critical on
the dead time, one typically uses one ADC
per DRS4 channel, and thus the dead time |
|
|
145
|
Thu Jan 26 09:12:03 2012 |
Ravindra Raghunath Shinde | DRS4 Rev2.0 for analog pulse counting | Hello,
We are using DRS4 Rev.2.0 board.
We want to measure number of pulses |
|
|
146
|
Thu Jan 26 09:15:42 2012 |
Stefan Ritt | DRS4 Rev2.0 for analog pulse counting |
|
|
|
147
|
Thu Jan 26 09:44:34 2012 |
Ravindra Raghunath Shinde | DRS4 Rev2.0 for analog pulse counting |
|
|
|
148
|
Thu Jan 26 09:49:38 2012 |
Stefan Ritt | DRS4 Rev2.0 for analog pulse counting |
|
|
|
149
|
Thu Jan 26 10:05:57 2012 |
Ravindra Raghunath Shinde | DRS4 Rev2.0 for analog pulse counting |
|
|
|
443
|
Fri Aug 7 18:41:37 2015 |
dante | DRS4 | Hi
I have just installed DRS4, but
when I try to view it from the USB it don't |
|
|
444
|
Fri Aug 7 20:32:15 2015 |
Felix Bachmair | DRS4 | Hi
Did you copy the udev rule 41-drs.rules
into /etc/udev/rules.d/ ? |
|
|
771
|
Tue Aug 27 08:33:22 2019 |
chinmay basu | DRS4 | Is DRS4 suitable for use with Silicon surface
barrier detectors? |
|
|
772
|
Tue Aug 27 09:14:03 2019 |
Stefan Ritt | DRS4 | Is a 5 GSPS oscilloscope suitable for use
with Silicon surface barier detectors?
|
|
|
175
|
Tue Aug 28 17:52:45 2012 |
Zach Miller | DRS-4.0.0 DOScreen.cpp | Hi,
I found an old thread regarding a
fix for DOScreen.cpp for DRS-3.1.0, that |
|
|
176
|
Wed Aug 29 10:52:44 2012 |
Stefan Ritt | DRS-4.0.0 DOScreen.cpp |
|
|