Demo Discussion

Forum Config Examples Contributions Vulnerabilities

Discussion forum about ELOG, Page 1 of 237  Not logged in

Find |  Login |  Help

Full | Summary | Threaded | Collapse | Expand     -- All entries -- Last day Last 3 Days Last week Last month Last 3 Months Last 6 Months Last Year -- Category -- Info Bug report Bug fix Question Request Comment Other  1893 Entries

Goto page 1, 2, 3 ... 235, 236, 237   Next

Webserver authentication may cause redirect loop, posted by Arjan Hulsbosch on Thu Jan 23 11:32:05 2025  If Elog is configured to use webserver authentication, and the user reported by the webserver does not exist in the password file, and the "Guest Menu commands" configuration is set in "elogd.cfg", and a logbook is accessed, then   Segfault on elog-3.1.5-1 when uploading file., posted by gary holman on Thu Dec 12 18:45:49 2024  I am receiving a segfault whenever I attempt to upload a file.   Please see attached .txt for valgrind output.   This occurs in version elog-3.1.5-1.   I reverted back to version elog-3.1.4-3 and the segfault does not occur. Segfault occurs in Elog version: elog-3.1.5-1       Re: Segfault on elog-3.1.5-1 when uploading file., posted by gary holman on Thu Dec 12 19:01:39 2024  Looks like duplicate report to https://elog.psi.ch/elogs/Forum/69826 gary holman wrote: I am receiving a segfault whenever I attempt to upload a file.            Re: Segfault on elog-3.1.5-1 when uploading file., posted by Stefan Ritt on Thu Dec 12 19:46:02 2024  A statement like "core dumped" does not help much. Same with valgrind memory leaks. I need a full strack trace with all parameters when the segment violation occurs. The easiest is when you run elogd vom inside gdb, and once you get the signal, do a "where" to see th full stack trace. As you can see from this forum, there is absolutely no crash when you upload any file, so it must have to do with your config file or anything             Re: Segfault on elog-3.1.5-1 when uploading file., posted by gary holman on Thu Dec 12 20:29:40 2024  Thanks for further instructions here is full stack trace: Program received signal SIGABRT, Aborted.                Re: Segfault on elog-3.1.5-1 when uploading file., posted by Stefan Ritt on Fri Dec 13 15:11:08 2024  Thanks to your stack trace, I found a case where a string might get overwritten, but only if the attachment file name is longer than 256 chars. I fixed the code and made a new RPM:   https://www.dropbox.com/scl/fi/r37qx9aka5ytt3j7vn4km/elog-3.1.5-20241213.el8.x86_64.rpm?rlkey=knct99pdltggunrbmyr2hpfe5&st=pkre24aq&dl=0                   Re: Segfault on elog-3.1.5-1 when uploading file., posted by gary holman on Fri Dec 13 19:40:57 2024  Thanks Stefen! I built from source (ELOG V3.1.5-3a5f2f00) and I confirmed as fixed.                        Re: Segfault on elog-3.1.5-1 when uploading file., posted by Evinrude Motor on Tue Jan 7 20:35:23 2025  When will the new source be in the standard download area ? I'm on ubuntu . gary holman wrote: Thanks Stefen!                         Re: Segfault on elog-3.1.5-1 when uploading file., posted by Stefan Ritt on Tue Jan 7 20:41:13 2025  It is in the usual download area which is referenced at https://elog.psi.ch/elog/download.html Stefan Evinrude   Equation Editor does not work, posted by Dominic on Sun Sep 1 04:33:13 2024  Hi! I am not sure if this is a know issue: it seems that the equation editor does not work anymore. Is there any fix or alternative method to type latex formula in the log?        Re: Equation Editor does not work, posted by Nick Sauerwein on Wed Sep 25 16:00:06 2024  We have observed the same issue. Did the CodeCogs api change?  Thanks for the help. Dominic       Re: Equation Editor does not work, posted by Dominic on Tue Nov 5 15:51:26 2024  is there any update on this bug? Has anyone else observed the same problem? Dominic wrote: Hi!          Re: Equation Editor does not work, posted by Stefan Ritt on Mon Jan 6 14:59:06 2025  Apparently Codecogs have changed their URL. I tried the update from    https://editor.codecogs.com/depr/CK_Editor_v4x.php but it did not help. The CK Editor v5 is quite different from v4 (like they require node.js to install it), so putting it into elog would be   Author special characters changed when saving as draft, posted by Víctor M. Nouvilas on Mon Dec 16 15:26:26 2024  Hello, I have installed ELOG in an Ubuntu 22.04 machine and is working great, but I have found a small bug with Author names. I have the config set like this for the Author attribute: Preset Author = $long_name   no availability of el8 and el9 rpm, posted by scott on Wed Feb 21 10:39:21 2024  Hi, I checked the RPM download page and found that there is no RPM available to install ELOG on el8 and el9 based OS.       Re: no availability of el8 and el9 rpm, posted by Laurent Jean-Rigaud on Wed Feb 21 11:15:38 2024  Hi, EPEL retired the ELOG package for security reason. You can build from GIT source as described in elog:Forum/69732 .          Re: no availability of el8 and el9 rpm, posted by Konstantin Olchanski on Wed Feb 21 21:20:56 2024  > EPEL retired the ELOG package for security reason no, this is not what happened, we (I) requested removal of elog packages from epel, debian and ubuntu because they had obsolete pre-cve (insecure)              Re: no availability of el8 and el9 rpm, posted by Laurent Jean-Rigaud on Thu Feb 22 00:53:26 2024  > > EPEL retired the ELOG package for security reason >  > no, this is not what happened, we (I) requested removal of elog packages from epel, debian and ubuntu because they had obsolete pre-cve (insecure)                 Re: no availability of el8 and el9 rpm, posted by Stefan Ritt on Thu Feb 22 08:12:28 2024  > I spent one hour yesterday to install almalinux in VM on my laptop, clone repo, rebuild ELOG RPM, install the new rpm and start elogd.  > You should have several VM on a shield for that :-P                    Re: no availability of el8 and el9 rpm, posted by Laurent Jean-Rigaud on Thu Feb 22 11:59:03 2024  > > I spent one hour yesterday to install almalinux in VM on my laptop, clone repo, rebuild ELOG RPM, install the new rpm and start elogd.  > > You should have several VM on a shield for that :-P  >                       Re: no availability of el8 and el9 rpm, posted by Stefan Ritt on Fri Feb 23 08:40:26 2024  > For my curiosity, I've just clone ELOG repo on Bitbucket to try the process. That's pity : pipelines are currently broken (incident traced in status page https://status.atlassian.com/).  > The goal is to build elog and pkg file for Ubuntu (docker images list : https://status.atlassian.com/). Next steps should to create a AlmaLinux VM to                         Re: no availability of el8 and el9 rpm, posted by Laurent Jean-Rigaud on Fri Feb 23 18:00:41 2024  Hi Stefan, > As you saw I use the bitbucket pipeline for CI/CD. The current bitbucket-pipelines.yml is pretty simple (see attachment). If you make me one which does the rpmbuild automatically, I'm more than happy to upload and use it. The downside there is that it only works for so long. As you saw                            Re: no availability of el8 and el9 rpm, posted by Stefan Ritt on Mon Feb 26 17:39:56 2024  Many thanks for your files and instructions. I integrated this into the official elog pipeline, so now the RPMs can be downloaded from https://elog.psi.ch/elog/download.html and they will be updated automatically after each commit. If you succeed with any Debian/Ubunto I'm happy to add that. What's missing now is an easy way to compile for Windows (which I don't have anymore).                               Re: no availability of el8 and el9 rpm, posted by Antonio Bulgheroni on Mon Feb 26 21:18:23 2024  +1 for a Windows pipeline!   Stefan                               Re: no availability of el8 and el9 rpm, posted by Laurent Jean-Rigaud on Mon Feb 26 22:23:05 2024  Hi Stefan, Nice to have up to date RPMs. For .DEB, I contact the Ubuntu maintainer for its build script, and cool, he replied that he's searching for it. That's could help me                                  Re: no availability of el8 and el9 rpm, posted by Antonio Bulgheroni on Tue Feb 27 06:59:06 2024  Many thanks for all your efforts! Laurent Jean-Rigaud wrote: Hi Stefan,                                  Re: no availability of el8 and el9 rpm, posted by Stefan Ritt on Tue Feb 27 07:35:15 2024  Laurent Jean-Rigaud wrote: For Windows target, It's supported in Bitbucket but only with private agent :-(                                     Re: no availability of el8 and el9 rpm, posted by Laurent Jean-Rigaud on Tue Feb 27 16:55:39 2024  Elogd for windows has an option -install which normally does it. Is it working on last Windows version (or the one enclosed in elog:Forum/69664) ? If Yes, a simple install-as-a-service.bat can be added to archive :-)                                     Re: no availability of el8 and el9 rpm, posted by Laurent Jean-Rigaud on Mon Mar 4 10:10:50 2024  Hi Stefan, Some updates for Windows version. I spent last WE to try to build ELOG on Windows from MSVCODE, MSCV, crosschain tool under linux etc, but in vain.                                        Re: no availability of el8 and el9 rpm, posted by Stefan Ritt on Tue Dec 10 15:34:41 2024  People are keeping me asking for a Windows installer. Is this now properly working, also under Windows 11? If you send me the executable, I could upload it to the distribution. Do people have to install cygwin before they can use it, or will the executable runn just by itself? If I understand correctly, the MinGW package                                           Re: no availability of el8 and el9 rpm, posted by Konstantin Olchanski on Tue Dec 10 19:23:32 2024  > People are keeping me asking for a Windows installer My Windows-11 laptop may free up in January and I could look at builds of elog and midas, but I know nothing about making Windows installers...   Probleme TLS, posted by Olivier MARTIN on Fri Dec 6 09:39:44 2024  Hello, I would like to notify by email as soon as an entry is created or modified. I declared my SMTP which uses TLS security. The following error message appears : Erreur d'envoi de mail via "smtp.xxxx.xxx.xxx.fr": 5.7.0 Must issue a STARTTLS command first Is there a solution ?       Re: Probleme TLS, posted by Stefan Ritt on Fri Dec 6 10:59:52 2024  TSL is not implemented in ELOG. Maybe I find time some day to do that, but if we have any volunteers in our community who could help me with that I would appreciate. Stefan          Re: Probleme TLS, posted by Olivier MARTIN on Mon Dec 9 10:23:32 2024  Thanks, Does email notification from a Gmail address work? It is noted that port 465 must be used for SSL use? Is this correct :             Re: Probleme TLS, posted by Konstantin Olchanski on Mon Dec 9 21:55:53 2024  What Stefan meant to say is that Elog does not implement sending email using encrypted SMTP over TLS. In theory it could be implemented, but if you try to use it, you may find that most   Reuqest to extract X-Forwarded-Name and X-Forwarded-Email when using webserver, posted by Liam Gaffney on Sun Dec 8 22:00:32 2024  When using the Webserver authentication in combination with "File" and "Self register = 3", it is possible to keep track of registrations and control access still. This is very useful, and upon clicking on the logbook for the first time, the user is asked to register by typing their username, full name and email address.   Global change of links/file path, posted by Dr Marta Divall on Mon Dec 2 10:36:41 2024  Dear All,   We have been using the ELOG for several years and had inserted hyper-links instead of whole files in order to save storage space. From this month our server is moved to a new location with a new address. Is there a way for me to retrospectivelly replace all addresses with the new       Re: Global change of links, posted by Stefan Ritt on Fri Dec 6 10:58:57 2024  You would have to access the raw elgo database files (which are pure ASCII files) and write some script which goes through all files and changes the URLs.  Stefan          Re: Global change of links, posted by Dr Marta Divall on Fri Dec 6 11:06:28 2024  Thanks! Stefan Ritt wrote: You would have to access the raw elgo database files (which are pure   choosing the default font ? , posted by Pavel Murat on Wed Nov 13 18:12:34 2024  Dear All, is there a way to choose the default "style" for the HTML encoding ? - I'd like to set it to "Typewriter" but couldn't find the corresponding option in the available docs/ sample config files...       Re: choosing the default font ? , posted by Stefan Ritt on Fri Nov 15 09:55:11 2024  Check elog/themes/default/elog.css and look for font-family. If you just want the elog entries in monospaced font, you can swith to "plain" encoding at the bottom of the entry form. You can also make this a default (check the docu).   Crash on attachment upload, posted by jaro mrazek on Thu Sep 12 10:42:08 2024  I am on ubuntu 24.04.1, I needed to git clone, make and make install, HEAD is 3fb85fa6 - (HEAD -> master, origin/master, origin/HEAD) Fixed compiler warning (3 weeks ago) It crashes on every attachment:  thank you. Jaro       Re: Crash on attachment upload, posted by Dominic on Tue Nov 5 15:44:57 2024  Does this issue occur only on Ubuntu systems? as I've experienced the same on my Raspberry Pi 5 running Ubuntu too ... jaro mrazek wrote: I am on ubuntu 24.04.1, I needed to git clone, make and make install,   Looking for version update advice, posted by Patrick Upson on Fri Sep 13 12:02:54 2024  I've inherited a position that includes deploying elog for an at-sea mission. Once at sea there's no gauntee of internet connection so I have to be sure things are going to work before hand. The machines I currently have (we have several backup machines) are running elog version 2.9.2 and I'm looking for a change log, or feature list to determine if it's safe to update the at-sea laptops to the latest version of elog.       Re: Looking for version update advice, posted by Stefan Ritt on Wed Sep 25 13:17:06 2024  If 3.1.4 runs safely on your laptop, there should be no problem to update the 2.9.2 one. But first do it on a copy of your logbooks from the at-sea. The get converted automatically into a newer format but that should be transparent. On the other hand you don't really need a new system if your old installation works fine and you don't need any of hte new features.          Re: Looking for version update advice, posted by Patrick Upson on Wed Sep 25 13:26:07 2024  Thanks. I did eveuntaully find the change log and made the decision to upgrade the at-sea machines. So far the configuration file we update for each mission still works. I have a copy of the 2.9.2 installer that if something catostrophic happens I can remove the new version and take it back, but I don't think it'll be a problem. We archive logbooks at the end of a mission, but each mission basically starts from a fresh install like state anyway.             Re: Looking for version update advice, posted by David Pilgram on Wed Sep 25 14:21:33 2024  I use linux elog, and if you upgrade to v3.x.x, it's difficult to go back to v2.9.x.  This is because the log files get grouped in year sub directories at  v3.x.x. In 2.9.x, the logfiles are store as (made up example)    /home/logfiles/yymmdda.log                Re: Looking for version update advice, posted by Patrick Upson on Wed Sep 25 15:02:16 2024  I ran a test (using Windows) and you're correct about the subfolder and file naming. I don't think that'll be an issue, but it's good to be aware of. If we end up having to revert to 2.9.2 for whatever reason, I think it sould still work fine if what logs we have are just copied up a directory (i.e /home/logfiles/2023/23mmdda.log ==> /home/logfiles/23mmdda.log)   elog sprintf() buffer overflows on ubuntu-22, posted by Konstantin Olchanski on Wed May 15 01:07:12 2024  I get the following compiler warnings about sprintf() buffer overflows. I suggest sprintf() should be replaced by std::string msprintf() from  midas. K.O.       Re: elog sprintf() buffer overflows on ubuntu-22, posted by Stefan Ritt on Wed Sep 25 13:19:29 2024  > I get the following compiler warnings about sprintf() buffer overflows. I suggest sprintf() should be replaced by std::string msprintf() from  > midas. K.O.   Catgegory filtering, posted by Gabriel Lopez on Tue Sep 24 19:38:23 2024  Currently have multiple logbooks hosted with elogd. One book is having an issue with Categories. The user regulary uses the category filtering to see one subject for the whole month. This past week it hasn't been working properly. When choosing a drop down category to filter there are not logs found. I've notice the fields under the categories change randomly. Sometimes it would add a % sign where there should be --. Some other fields go from displaying   Is the Windows Binary/Installer now compiled for Windows 11?, posted by Frank Baptista on Fri Sep 20 16:24:37 2024  Hi all, Quick question -- I was wondering if the current Windows Binary/Installer is now compiled for compatibility for Windows 11?   I did look through the Forum, but the the answer wasn't really clear.     Please help with config, posted by Daniel Sajdyk on Mon Sep 2 12:54:12 2024  Hello, I'm trying to create config file for simple incident logbook. It should has 3 attributes: source (source of incident) with options:  email jira_id ezd_id Tactics   Can Elog make a table?, posted by Walter Reviol on Wed Aug 7 22:54:03 2024  Hi! I like to format an Elog "directory" such that all entries make/occur as a table. Say: 5 columns and a large number of rows. In a sense, make an excel spreadsheet in Elog. Is this possible? How can this be done? Is there perhaps a template?       Re: Can Elog make a table?, posted by Stefan Ritt on Thu Aug 8 09:07:45 2024  I'm not exactly sure what you want to do, but there are two options in elog: 1) Insert directly a table like this one: Index   Elog on FreeBSD, posted by Truupe on Mon Aug 5 20:45:15 2024  Anyone using elog on FreeBSD nowadays?  I know it used to be in the ports tree about 10 years ago but seems to be abandoned.  Tried to compile from source on 14.1, but no luck there.       Re: Elog on FreeBSD, posted by Truupe on Mon Aug 5 21:15:08 2024  Welp, nevermind, I dug a little more and managed to compile it on 14.1 using cmake. Truupe wrote: Anyone using elog on FreeBSD nowadays?  I know it used to be in the   Invalid Content-Length in header when running behind a load balancer, posted by Tamas Gal on Wed Jan 25 14:36:33 2023  I am still struggling to get ELOG running behind a load balancer and hope to get some advice here. As already reported in https://elog.psi.ch/elogs/Forum/69542 I observed an infinite loop of redirects when prompted to log in and using a non-empty password file. Without a password, the service worked as expected. This was with version 3.1.3.       Re: Invalid Content-Length in header when running behind a load balancer, posted by Tamas Gal on Wed Jan 25 19:51:29 2023  I put the ELOG service behind an Apache reverse proxy which is now sitting behind the HAProxy. It works like this, but it's just a workaround. I am pretty sure that ELOG has problems to communicate with HAProxy correctly and it seems that Apache is more forgiving. So that the chain HAProxy -> Apache -> ELOG and vice versa is working.          Re: Invalid Content-Length in header when running behind a load balancer, posted by André on Mon Jul 22 16:30:04 2024  I have the same problem. I found a temporary solution: https://elog.psi.ch/elogs/Forum/69807 Tamas Gal wrote: I put the ELOG service behind an Apache reverse proxy which is now sitting             Re: Invalid Content-Length in header when running behind a load balancer, posted by Stefan Ritt on Wed Jul 31 14:22:52 2024  I changed elog to interprete the content-length header case in-sensitive and committed the change. Can you try again? Stefan André   HTTP headers should be parsed case insensitive, posted by André on Mon Jul 22 16:17:55 2024  I'm trying to run elog behind haproxy, but get the error "Invalid Content-Length in header" on posting. As stated in the manual, haproxy rewrites all headers to lower case.       Re: HTTP headers should be parsed case insensitive, posted by Stefan Ritt on Wed Jul 31 14:21:21 2024  I changed elog to interprete the content-length header case in-sensitive and committed the change. Can you try again? Stefan André   Old attachments erroneously appearing on new Elog entries., posted by Carl Unsworth on Fri Jul 26 12:53:23 2024  Hi, I'm not sure if this is an Elog bug, something wrong in my configuration/database. When I create a new article on Elog it always shows an attachment from one of the first entries ever made to this log book made. This is in addition       Re: Old attachments erroneously appearing on new Elog entries., posted by Stefan Ritt on Fri Jul 26 13:01:54 2024  This bug has been fixed in meantime, please upgrade to the current version.          Re: Old attachments erroneously appearing on new Elog entries., posted by Carl Unsworth on Fri Jul 26 13:14:38 2024  Thanks very much for the quick response Stefan. My apologies, I thought I was on the latest version or I would have upgraded before contacting you. The file I installed from was the rpm "elog-3.1.5-20240226.el9.x86_64.rpm" which still seems to be the latest version on the Dropbox downloads page.             Re: Old attachments erroneously appearing on new Elog entries., posted by Stefan Ritt on Fri Jul 26 14:09:19 2024  I updated the EL9 rpms, so please try again.                Re: Old attachments erroneously appearing on new Elog entries., posted by Carl Unsworth on Fri Jul 26 14:33:50 2024  Great, thank you again. I have now installed the latest and the problem appears to be gone. Stefan Ritt wrote: I updated the EL9 rpms, so please try again.   Old attachments erroneously appearing on new Elog entries., posted by Carl Unsworth on Fri Jul 26 12:52:54 2024  Hi, I'm not sure if this is an Elog bug, something wrong in my configuration/database. When I create a new article on Elog it always shows an attachment from one of the first entries ever made to this log book made. This is in addition   Elog/ImageMagick under windows 11, posted by Aled Isaac on Thu Jul 18 11:38:01 2024  I was wondering if anyone would be able to assist me in getting the ImageMagick/figure scaling working on an elog running under windows 11 (Microsoft Windows Version 22H2 (OS Build 22621.3880)).   I've followed the installation instructions and checked that $PATH contains the directory for both ImageMagick and GSS.  In a 'command prompt' window, when I execute "identify -version" from any directory I get the response:       Re: Elog/ImageMagick under windows 11, posted by Aled Isaac on Wed Jul 24 17:21:45 2024  I've managed to get it working and the problem wasn't what I thought it was.  It turns out that ImageMagick v7 doesn't have a "convert.exe" program in the windows version due to some conflict with a disk conversion utility.  The "convert.exe" has been replaced with a "magick.exe" and so I made a CONVERT.BAT script within the elog folder with content "magick %*".  This workaround appears to have solved the problem.   broken http response when deployed on OpenShift, posted by Enrico Gamberini on Wed Jul 10 17:43:07 2024  Hello! We're setting up ELOG on OpenShift. ELOG is installed on a Alma Linux 9 image. The container and the elog demo works fine executing the docker image locally.       Re: broken http response when deployed on OpenShift, posted by Enrico Gamberini on Thu Jul 11 15:25:19 2024  Sorry for posting again but something else came up. Actually, building from source (elog-3.1.5-1.tar.gz) works just fine on OpenShift too.          Re: broken http response when deployed on OpenShift, posted by Laurent Jean-Rigaud on Thu Jul 11 19:15:39 2024  Hey Enrico, Do you activate also all options with your build ? (pam/ldap/kb5/ssl) Can you compare ldd command results on elogd binaries builded by yourself and the one from RPM ?             Re: broken http response when deployed on OpenShift, posted by Enrico Gamberini on Mon Jul 15 09:45:56 2024  Hi Laurent, Thanks, good point! I'm building a vanilla version (no extra options enabled as I'm using Webserver authentication). 3.15 RPM:                Re: broken http response when deployed on OpenShift, posted by Laurent Jean-Rigaud on Tue Jul 16 00:15:12 2024  Enrico, When using RPM in OpenShift, I guess all the RPM dependencies are correctly installed. FYI, I met a problem with elogd docker built with alpine Linux image and running on Synology NAS (x86_64). The ImageMagick dependencies libs                   Re: broken http response when deployed on OpenShift, posted by Laurent Jean-Rigaud on Tue Jul 16 00:45:08 2024  Also, you have the option to rebuild RPM from SRPMS or SOURCES via ELOG buildrpm script. You will need to install rpmbuild tools... Options (ldap, kb5, etc) can be set from options or by editing defaults.   Elog in HTML Title, posted by Michael on Mon Jul 15 14:24:43 2024  Hi, is it possible to change the name ELOG from all HTML titles. E.g. find/search. If you click on find/search the browser/html tag/title is 'ELOG search'. Is it possible to change this to 'xxx       Re: Elog in HTML Title, posted by Stefan Ritt on Mon Jul 15 14:35:40 2024  You can change the title for the standard page with 'Page title = ...' and for the list page with 'List Page title = ...', but unfortunately not for all pages (such as the search mask). Stefan   Extendable list of numeric items, posted by Nick Sauerwein on Mon Apr 8 15:46:49 2024  Hey eloggers, I am setting up an ELOG to log the cleanroom fabrication in our startup (Luxtelligence SA). The fabrication is structured in different process steps that are performed by several wafers at the same time (each wafer as an ID).       Re: Extendable list of numeric items, posted by John Kelly on Mon Apr 8 17:08:11 2024  Hi Nick, If I understand your question correctly maybe this might help: https://elog.psi.ch/elog/userguide.html Search for 'attribute' and you will find this:  "some attributes          Re: Extendable list of numeric items, posted by Nick Sauerwein on Mon Apr 8 17:23:00 2024  Hi John, thanks for the info =). Do you known whether there is an example of how to use the list-boxes attributes? Best,             Re: Extendable list of numeric items, posted by Konstantin Olchanski on Tue Apr 9 04:46:36 2024  I think what you want already exists, for example, when I reply to this message, there is this "Category" selection box with predefined answers  "Info", "Bug report", etc. For your case, replace "Category" with "Wafer type ID", replace "Info" with "1", "Bug report" with "2", etc. You numeric  values will be strings containing numbers "1", "2", etc. That works for you? K.O.                Re: Extendable list of numeric items, posted by Nick Sauerwein on Tue Apr 9 09:25:01 2024  Hey,  thanks for your answer. I completely get your point. However, I think my question as not precise enough.                   Re: Extendable list of numeric items, posted by Nick Sauerwein on Fri Apr 19 12:30:52 2024  Hey eloggers, does anyone have an answer to this question?                   Re: Extendable list of numeric items, posted by David Pilgram on Sat Apr 20 18:47:37 2024  I have replied to this entry, because, for some reason I don't understand, if I reply to your latest entry, I am automatically logged out.  I tried this multiple times, and also on many other entries and had no issues other than entry 69787 - any reason for this, Stefan?                      Re: Extendable list of numeric items, posted by Nick Sauerwein on Fri Jul 12 16:30:02 2024  Thanks for you help. This is almost it.  The problem is that the items are options and not freely closable numbers. In the end, with your solution, it will show you all of the previously put IDs                         Re: Extendable list of numeric items, posted by Sebastian Schenk on Fri Jul 12 16:51:44 2024  Just my 2 cents: There is a hardcoded limit how many entries the Option list can have. Without looking into the source, I assume the limit also exists for MOptions.                            Re: Extendable list of numeric items, posted by David Pilgram on Fri Jul 12 17:39:53 2024  Just to add some points for others who may find this of use in future. The hard coded number of entries options or Moptions can have is 100.  You can edit the code and recompile, but that would   , posted by sam wells on Mon May 20 11:54:37 2024      read-only elog server, posted by Germano Massullo on Mon Oct 23 15:20:32 2023  Good day. I am writing this post to ask how I can turn an elog website into a read-only version that will stay online for historical documention purposes. I tried to search on Elog documentation but I had no success Thank you and have a nice day       Re: read-only elog server, posted by Stefan Ritt on Mon Oct 23 16:15:06 2023  Use Menu commands = List, Find, Help to remove all command which let you create or edit entries (New, Reply, Edit, ...)           Re: read-only elog server, posted by Bockjoo Kim on Sun Apr 28 14:45:22 2024  Hi, Could you be more specific? Where do I get the 'Menu commands"? Thanks,             Re: read-only elog server, posted by Laurent Jean-Rigaud on Mon Apr 29 15:22:37 2024  The menu is the line with available functions, customizable in logbooks config Also, these are buttons in logbook edit view.   Imagemagick not working on Ubuntu, posted by scott on Wed Apr 24 12:55:25 2024  Hi Team, I have set up Elog on the Ubuntu server using the compile and install method. I have installed ImageMagick and GhostScript along with that.       Re: Imagemagick not working on Ubuntu, posted by Konstantin Olchanski on Thu Apr 25 02:11:08 2024  Please see https://daq00.triumf.ca/DaqWiki/index.php/Ubuntu#Enable_elog_PDF_preview see https://stackoverflow.com/questions/52998331/imagemagick-security-policy-pdf-blocking-conversion   Suggestion to update Mac OS X instructions in ELOG Administrator's Guide, posted by Andreas Warburton on Sat Mar 9 17:17:02 2024  The section of the ELOG Administrator's Guide https://elog.psi.ch/elog/adminguide.html describing how to build and install ELOG on a Mac OS X system has worked well for me for several years, even though there have been warnings that the "load" and "unload" subcommands of the "launchctl" command have been deprecated for some time.  After trying my luck again on a new Mac       Re: Suggestion to update Mac OS X instructions in ELOG Administrator's Guide, posted by Andreas Warburton on Sun Mar 10 04:25:43 2024  Here's a more complete/correct set of the updated commands: sudo launchctl enable system/ch.psi.elogd sudo launchctl bootstrap system /Library/LaunchDaemons/ch.psi.elogd.plist           Re: Suggestion to update Mac OS X instructions in ELOG Administrator's Guide, posted by Stefan Ritt on Mon Apr 15 18:05:27 2024  Thanks for the info, I updated the adminguide. Stefan Andreas             Re: Suggestion to update Mac OS X instructions in ELOG Administrator's Guide, posted by Andreas Warburton on Tue Apr 16 13:20:01 2024  Hi Stefan, Thanks a lot for implementing the updated commands. I noted that there are a few typos that could cause people confusion if not fixed: In one case, "launchctl" is misspelled. Confusingly, I think the two lines containing the 'enable' and 'disable' commands use the contiguous text string "system/ch.psi.elogd"                Re: Suggestion to update Mac OS X instructions in ELOG Administrator's Guide, posted by Stefan Ritt on Tue Apr 16 13:31:02 2024  Thanks, fixed. Stefan Andreas   Draft saved after ~15 minutes, then anything entered a few hours later is ignored, posted by Celeste Torkzaban on Tue Mar 12 09:12:32 2024  Hello, I've noticed that many times, I start an elog and continue editing adding to a few hours later, then I submit and it deletes everything I entered after the last time a draft was saved. I paid more attention and saw that it saves a draft after about a few minutes, and if I wait too long before       Re: Draft saved after ~15 minutes, then anything entered a few hours later is ignored, posted by Stefan Ritt on Mon Apr 15 17:53:23 2024  That's strange. If you edit a message, indeed a draft is saved every ten seconds or so when you keep typing. In our installations we keep an elog entry typically open for eight hours, then save it at the end of the shift, and everything works fine. Have you tried playing aournd with your config file, like "Restrict edit time" or so? Please also make sure you have the current elog version. I sse you have 3.1.3 which is quit old.   Record date isn't set to current date when replying to elogs, posted by Celeste Torkzaban on Tue Mar 12 09:20:14 2024  Hello, I started using the record date feature in one logbook, since we plan to copy over old entries Joplin/Onenote. When starting a new entry, I see that the record date is automatically set to the current date, but when I reply to an elog, the record date is automatically set to the record date of       Re: Record date isn't set to current date when replying to elogs, posted by Stefan Ritt on Mon Apr 15 17:50:20 2024  Have you tried the config option "Preset on reply <attribute> = $date". On a reply, the <attribute> will be preset with the current date. Stefan   today date in template, posted by Stefano Lacaprara on Mon Apr 8 10:49:10 2024  Hello,   I am using template for some elogbook entries.       Re: today date in template, posted by Stefan Ritt on Mon Apr 8 11:27:09 2024  This is a nice idea, but currently no text substations in templates are implemented. It only works in attributes right now. Stefan          Re: today date in template, posted by Konstantin Olchanski on Tue Apr 9 04:50:28 2024  > This is a nice idea, but currently no text substations in templates are implemented. It only works in attributes right now. but can it be done by javascript injection? load a custom .js or .html file, in this file run javascript code to root down the DOM tree until you              Re: today date in template, posted by David Pilgram on Tue Apr 9 13:49:51 2024  This was given to me by Andreas Luedeke of this parish.  In my elog.cfg file, I have the following:   Installation with amp on Rocky Linux, posted by Nina Bondarenko on Thu Mar 21 15:23:52 2024  Hello all, I am installing elog on an Rocky Linux instance. Have dependensy problem.  rpm -Uvh elog-latest.el7.x86_64.rpm        Re: Installation with amp on Rocky Linux, posted by Laurent Jean-Rigaud on Thu Mar 21 19:30:49 2024  Hi Nina, The RPM is built with Kerberos (libber*), LDAP (libldap*) and SSL (libssl*) options. These libs are missing on your system, and rpm command does not take care of dependencies.          Re: Installation with amp on Rocky Linux, posted by Stefan Ritt on Fri Mar 22 07:41:56 2024  Is there a way to install all dependencies automatically? Like if I install a package like "emacs" I get a list of dependencies with are automatically installed: Dependencies Resolved             Re: Installation with amp on Rocky Linux, posted by Laurent Jean-Rigaud on Sat Mar 23 23:51:37 2024  Normally it should work. Requirements are set in SPEC file. $ rpm -qpi --requires elog-3.1.5-20240226.el7.x86_64.rpm /bin/sh                Re: Installation with amp on Rocky Linux, posted by scott on Mon Mar 25 10:18:55 2024  Is there an RPM available for Rocky 8 or Rocky 9? And checking over https://elog.psi.ch/elog/download/RPMS/ , only el7 is found. Is that the right place to look for EL8 or EL9 based RPM?                   Re: Installation with amp on Rocky Linux, posted by Laurent Jean-Rigaud on Mon Mar 25 10:55:43 2024  Hi, The ELOG website provides new link to RPM packages : Linux binaries are distributed as RPMs.                      Re: Installation with amp on Rocky Linux, posted by scott on Mon Mar 25 16:19:02 2024  Hi, Thanks for the links to EL8/EL9.                          Re: Installation with amp on Rocky Linux, posted by Laurent Jean-Rigaud on Mon Mar 25 16:44:03 2024  Yes, same build options are used.  But i can not'confirm that they are working as well as on EL7. The tests done by build script on CI/CD are quite simple and limited to rpm installation, service start and access from cmdline to elog server.   Problem in logging with LDAP and passwd, posted by Stefano Lacaprara on Mon Feb 22 12:29:16 2021  Dear experts,    I have a logbook which has authentication as follow       Re: Problem in logging with LDAP and passwd, posted by Sebastian Schenk on Tue Mar 2 16:03:48 2021  Dear Stefano, the support for the LDAP is limited. As stated in the documentation "on an as-is basis".          Re: Problem in logging with LDAP and passwd, posted by Laurent Jean-Rigaud on Fri Mar 5 01:43:20 2021  Hi, It seems that ELOG does not support LDAPS but only simple LDAP connection.             Re: Problem in logging with LDAP and passwd, posted by Sebastian Schenk on Fri Mar 5 13:54:13 2021  Hi, we use the LDAPS connection in our setup and it works without issues. You have to specify "LDAP server = ldaps://server.tld:port" and normally it uses a different port (636) than insecure LDAP (389).                Re: Problem in logging with LDAP and passwd, posted by Laurent Jean-Rigaud on Sun Mar 14 17:02:49 2021  Hi Sebastian,   Nice to hear !       Re: Problem in logging with LDAP and passwd, posted by scott on Tue Mar 19 16:58:52 2024  Hi Stefano, I also tried to set up LDAP authentication and password file-based authentication using the same settings as yours, which is not working as expected. It   Runaway bogus attachment counts in Summary view attachment column, posted by Andreas Warburton on Thu Mar 7 08:55:49 2024  On a new MacBook Pro (Silicon M3), I installed version 3.1.5 build 23df00d9.  The application appears to work normally, except that, after a short while, the indicated attachment count (paperclips in the attachment column of the Summary view) starts to increment fairly rapidly with each time that I visit the page.  Attachment counts appear even for records that don't have any attachments.  When I access records individually, either       Re: Runaway bogus attachment counts in Summary view attachment column, posted by Andreas Warburton on Sat Mar 9 17:04:13 2024  A quick follow-up concerning the secondary matter I mentioned in my last post, namely the issues I had with the deprecated "sudo launchctl load ..." and "sudo launchctl unload ..." subcommands currently provided in the ELOG installation instructions for MacOS.  I found a solution to this -- will post it in a separate thread.          Re: Runaway bogus attachment counts in Summary view attachment column, posted by Stefan Ritt on Sat Mar 9 17:14:09 2024  I'm traveling right now and will only next week be able to look into that, so please be patient for a few more days. Stefan       Re: Runaway bogus attachment counts in Summary view attachment column, posted by Stefan Ritt on Thu Mar 14 21:21:33 2024  The problem with the attachment paperclips has been fixed in the current version. Stefan Andreas          Re: Runaway bogus attachment counts in Summary view attachment column, posted by Andreas Warburton on Fri Mar 15 05:13:42 2024  Thanks a lot Stefan, for fixing this so quickly! I'm now running 3.1.5 fe60aaf0, with the phantom-attachment-count issue in the Summary view now resolved.  Cheers, Andreas W. Stefan   use LDAP and elog.pwd file, posted by scott on Fri Mar 8 13:09:31 2024  Hi Members, I have compiled and installed ELOG in Ubuntu 22.04. My ELOG version is 3.1.5 revision fc6679b. I would like to use both the password file (../logbooks/elog.pwd)   Change an entry to a reply for an other entry, posted by iman haddad on Thu Mar 7 12:22:54 2024  Hi Everybody, I import a logbook from csv file, with a number for laboratory's notebook, which can be use by multiple intern. I'd like to add a "reply to" when the number is the same, it's like a "move to" but in the same logbook.   LDAP over password file, posted by scott on Tue Feb 27 16:00:43 2024  Hi Team, Current configuration   user change under webserver authentication not recognized, posted by Frank Heyroth on Fri Jan 19 15:49:13 2024  Hi all, I am using the Apache webserver authentication and redirection over http (not https). I have configured it 1:1 as described in the Adminguide. In the elog.cfg I set Authentication = Webserver.       Re: user change under webserver authentication not recognized, posted by Frank Heyroth on Wed Jan 24 14:50:21 2024  I found the reason of the bug: In line 27441 of elogd.cxx the http_user is overwritten by the user saved in the sid_ array as a sideeffect of the sid_check function:          Re: user change under webserver authentication not recognized, posted by Stefan Ritt on Fri Feb 23 15:13:46 2024  Thanks for the fix, I committed it. Please give it a quicky try sinc I cannot test it here (don't use webserver authentication...) Stefan Frank   http status 200 returned for "file not found", posted by Konstantin Olchanski on Fri Mar 18 00:36:37 2022  "file not found" should return http code 404. elogd returns code 200 together with a page containing text "404 not found". This pollutes the browser cache with wrong content (in this case, we are trying to load a css file, and the browser       Re: http status 200 returned for "file not found", posted by Alexey Khudyakov on Tue Jan 30 13:10:38 2024  > "file not found" should return http code 404. elogd returns code 200 together > with a page containing text "404 not found". This pollutes the browser cache > with wrong content (in this case, we are trying to load a css file, and the browser          Re: http status 200 returned for "file not found", posted by Stefan Ritt on Fri Feb 23 14:59:29 2024  > > "file not found" should return http code 404. elogd returns code 200 together > > with a page containing text "404 not found". This pollutes the browser cache > > with wrong content (in this case, we are trying to load a css file, and the browser   ERROR: The certificate of ‘elog.psi.ch’ doesn't have a known issuer, posted by scott on Tue Feb 20 11:49:19 2024  Hi, As there is no ELOG available in Epel repository for Rocky9, I tried to install ELOG from https://elog.psi.ch/elog/download/RPMS/elog-latest.el7.x86_64.rpm       Re: ERROR: The certificate of ‘elog.psi.ch’ doesn't have a known issuer, posted by Laurent Jean-Rigaud on Tue Feb 20 11:56:14 2024  Hi You can use an option to wget to discard certificate checks m. Btw this rpm file is build for el7 gen aka entreprise linux 7. So it souldn't install  on gen 9....          Re: ERROR: The certificate of ‘elog.psi.ch’ doesn't have a known issuer, posted by Konstantin Olchanski on Wed Feb 21 00:12:45 2024  > wget https://elog.psi.ch/elog/download/RPMS/elog-latest.el7.x86_64.rpm I confirm, both wget and curl do not work, not happy with https certificate. (current macos)             Re: ERROR: The certificate of ‘elog.psi.ch’ doesn't have a known issuer, posted by Laurent Jean-Rigaud on Wed Feb 21 03:13:33 2024  To have ELOG RPM for EL9, you need to rebuild package from source under EL9 host or VM (i use almalinux9 for this test) : 1- install RPM build tools (csh is used by ELOG scripts. Devel rpms are dependencies) : sudo dnf install rpm-build gcc gcc-c++ git openssl-devel krb5-devel pam-devel openldap-devel csh 2- retrieve last source       Re: ERROR: The certificate of ‘elog.psi.ch’ doesn't have a known issuer, posted by Stefan Ritt on Wed Feb 21 09:16:00 2024  The chain certificate on elog.psi.ch has been expired, so I installed  the current one and now wget should be happy ;-) Stefan scott   ERROR: The certificate of ‘elog.psi.ch’ doesn't have a known issuer, posted by scott on Tue Feb 20 11:44:30 2024  Hi, As there is no ELOG available in Epel repository for Rocky9, I tried to install ELOG from https://elog.psi.ch/elog/download/RPMS/elog-latest.el7.x86_64.rpm   Webserver Auth Method and Self Registration, posted by James on Sun Feb 18 11:43:07 2024  Hi there. I have been testing a set-up of elog behind an Apache reverse proxy using the Webserver auth method. Apache has been configured for LDAPS with Active Directory allowing us to restrict Elogs by AD group, something not able to be done with the LDAP module. Testing with Elog 3.1.4 (on Windows) and also Elog 3.1.5 (compiled on Ubuntu 20.04) I experience an issue that when the user logs in for the   How to not expose elog port when running under a reverse proxy, posted by Nicola on Mon Jan 22 08:22:33 2024  I am running elog under Apache as explained in the administrator's guide. Everything works fine, butmy IT service complains about the elog port being publicly exposed, so I have to fix this. As far as I understand when running under a reverse proxy there's no need for the port to be publiuclyexposed, but I cannot find how to configure the elog server to expose it only locally       Re: How to not expose elog port when running under a reverse proxy, posted by Frank Heyroth on Mon Jan 22 20:50:50 2024  Hi, as I understand right you can do this in the elogd.cfg via Interface = 127.0.0.1   Let the user decide which columns should be displayed, posted by Sarah Kuckuk on Thu Jan 18 13:56:59 2024  Hello I was wondering if there is any possibility to let the user decide which columns to show/download in the search results? We have quite a lot of fields and it would help the usefulness of our elog a lot.       Re: Let the user decide which columns should be displayed, posted by Stefan Ritt on Mon Jan 22 12:15:26 2024  There is a general display option "List display", but that applies for all users. For the download, you can load the CSV file into a spreadsheet program and then delete some columns. Stefan   Maximum number of attributes, posted by Dr Marta Divall on Mon Jan 8 11:06:49 2024  The maximum number or attributes is 100. Is it possible to increase this? Thanks!       Re: Maximum number of attributes, posted by Stefan Ritt on Mon Jan 8 11:08:14 2024  You would have to change the elogd.c code and recompile. At some point you wlll however get crash of elogd with a stack overflow. If you need more than 100 attributes, it becomes anyhow hard to manage, so I would suggest other ways, like adding iformation to the text body etc. Best,          Re: Maximum number of attributes, posted by Dr Marta Divall on Mon Jan 8 11:42:08 2024  Dear Stefan,  Thansk for the super fast response! To keep the stability of the system we will look for a different solution then.  Best,             Re: Maximum number of attributes, posted by David Pilgram on Mon Jan 8 15:56:40 2024  In my case, I had a number of attributes which had a varied prefix.  For example, "progressed" , which could have no prefix, or prefix "I", "To be", "Strongly", "Seriously"... and that was true (the same prefixes, or at least many of them) for a number of attributes.  Splitting them into two groups, the prefixes and the action, allowed me to gain more actual attributes without having to recompile.                 Re: Maximum number of attributes, posted by Dr Marta Divall on Mon Jan 8 16:18:45 2024  To explain the problem, we have silicon chip designs, which we log with an indentifyier, which is the attribute for easy search, as we want to follow their progress from design thorugh fabrication to testing, involving many people. They are called D_001; D_099...you get it. We have reached the 100, but maybe it is the est just to create an archive after each 100 design and make a new tab/logbook. Any other suggestions are of course welcome.                    Re: Maximum number of attributes, posted by Stefan Ritt on Mon Jan 8 16:25:05 2024  Why don't you simply create a single attribute "identifier", which then gets a value D_001, ..., D_xxx. You can still use the D_xxx in full text search. Stefan                      Re: Maximum number of attributes, posted by David Pilgram on Mon Jan 8 17:30:42 2024  Or what about the "ticket number" feature?  Every new entry  thread (sorry, confusing terminology on my part) would increment the ticket number by one, and there is no limit as far as I am aware.  This is all explained in the elogd configuration documentation.   Stefan                         Re: Maximum number of attributes, posted by David Pilgram on Mon Jan 8 21:08:43 2024  As for my suggestion earlier, now I'm at my computer with working elog. I think that the following four lines (three I guess already there but need alteration for this) need to appear in your elogd.conf file.  The first three should also include any other thing you need to display etc.  I've cut this down to the bear bones, and ... means anything else you want to add.    Restricting entries view by user, posted by Leonardo Tacconi on Thu Nov 2 11:38:36 2023  Good morning, I would like to ask you whether it is feasible to establish a logbook that limits access to entries, enabling each user to view only their own. Although creating a logbook per user is an apparent solution, it does not meet my requirements.       Re: Restricting entries view by user, posted by Stefan Ritt on Thu Nov 2 11:46:42 2023  No, this is not possible with the current version of Elog, so indeed everybody needs their own logbook. Stefan Leonardo          Re: Restricting entries view by user, posted by Matteo Mannini on Tue Nov 7 22:07:24 2023  Dear Stefan, thanks to the answer you gave to my colleague.  Now, attempting to follow your suggestion... If we will create several logbooks, one for each user,             Re: Restricting entries view by user, posted by Stefan Ritt on Thu Nov 30 14:28:12 2023  Keeping the global and individual logbooks in sync is not possible. So indded my proposal is a cumbersome solution in your case. We do have "restrict edit" which lets users only edit their own entries, but we do not have "restrict view". Maye some thought for a future version of elog. Stefan   Cannot send Emails, posted by John on Mon Oct 23 20:35:54 2023  Hello, my sending of emails was working a while back but I have not checked on it in a few months and found out I am getting authentication errors sending to my MTA (mailer). I was using a base64 to encode the pw but now my mailer (gandi.net) rejects it. Has anything changed over the last couple of years with Elogs code that would be affecting this? I just upgraded (Linux) and changed my testing grounds to non-production and the same problem exists.       Re: Cannot send Emails, posted by Stefan Ritt on Tue Oct 24 08:12:38 2023  ELOG has not change in the last years in that respect, but I know that mailer get more and more picky about encryption etc. So you probably have to convince your mailer to accept the pw as it comes from ELOG, or do not require a pw for that specific client. Stefan   Fail to upload enclosure in ELOG , posted by Laurent Jean-Rigaud on Mon Jan 16 20:18:12 2023  Hi, I currently testing last ELOG version from git in a docker with LDAP activated (https://hub.docker.com/r/usinagaz/elog-ldap). The goal is to use it on Synology NAS server, associated with local LDAP server.       Re: Fail to upload enclosure in ELOG , posted by Laurent Jean-Rigaud on Wed Oct 11 23:09:36 2023  Ok, i reply to myself as i could resolve the problem by changing the alpine Linux image to Debian light. After debugging, the problem seems to be the compilation option used for alpine packets, which is not fully compatible when running on NAS Intel cpu.   link to attachment within html editor, posted by Celeste Torkzaban on Mon Oct 9 10:43:46 2023  Hello, I like the ELcode feature that lets you easily make an internal link to an attachment in the same post. However, I wasn't able to get this to work in the html editor, even though it's possible to use the ELcode format to link to another post in the logbook. When I type in elog :/1 in the       Re: link to attachment within html editor, posted by Stefan Ritt on Mon Oct 9 12:30:44 2023  You can always insert the full link to the attachment like this one: https://elog.psi.ch/elogs/Forum/231009_104933/SCR14.PNG But you can also use elog:69699/1 as shown here. Unfortunately you can do that only after the entry has been submitted, so you know the ID number of that entry. Once you have it, edit the entry and put it in.          Re: link to attachment within html editor, posted by Celeste Torkzaban on Mon Oct 9 16:43:06 2023  thank you! Stefan Ritt wrote: You can always insert the full link to the attachment like this one:    Filtered browsing, posted by Michael on Fri Oct 6 11:19:34 2023  Hi, is there a trick to get "Filtered browsing" working? If i am on the first entry and i checked the checkbox of one Attribute, the next entry is still the second one and not the next with the   elog server crashed due to cookies send by client, posted by Heinz Junkes on Mon Sep 18 13:49:05 2023  Our elog instance (elogd 3.1.4 built Jan 13 2021, 20:44:20 revision ce2a48e9) has been running for years without any problems. We have a new user who consistently crashes the elog: GET /Omicron-STM-XPS/?rsort=Record%20date HTTP/1.1       Re: elog server crashed due to cookies send by client, posted by Heinz Junkes on Tue Sep 19 10:58:14 2023  The server is crached because the author field was accidentally filled with a long string due to an automated (remote) script: “ Author: The ion getter pump has successfully recovered and appears to be operating steadily once more. Consequently, I proceeded with sputtering   update elog downloads page, posted by Konstantin Olchanski on Fri Sep 15 21:42:38 2023  The elog downloads page is slightly out of date, https://elog.psi.ch/elog/download.html 1) the "git clone" instructions work (but there is no git tags corresponding to different releases, I suggest adding test: "elog developers        Re: update elog downloads page, posted by Stefan Ritt on Mon Sep 18 14:38:30 2023  Thanks for the reminder, I updated the download instructions.   File/App associations for attachments, posted by Evinrude Motor on Sun Aug 20 20:49:04 2023  Is there somewhere I can change the file extension / app associations ? When I open an ".ods" attachment ELOG lets me pick the app . If I open a ".eml" it dumps me into the browser. At the system level ".eml" is associated with "thunderbird"         Re: File/App associations for attachments, posted by Evinrude Motor on Thu Aug 24 15:54:51 2023  I was thinking I could accomplish this with some 'attribute' change but havent fogured it out yet . My preference would be for elog to ask everytime . Evinrude          Re: File/App associations for attachments, posted by Stefan Ritt on Thu Aug 24 16:43:41 2023  Below are the MIME types hard-coded into elogd. As you can see there is neither .ods nor .eml. If you give me the MIME type, I can add that easily. I wonder however why both work differently for you. I believe this is a browser setting. Stefan             Re: File/App associations for attachments, posted by Evinrude Motor on Thu Aug 24 17:21:06 2023  so now that you have pointed me in  the right direction let me hack on it a bit to see what works .  Stefan Ritt wrote: Below are the MIME types hard-coded into elogd. As you can see there             Re: File/App associations for attachments, posted by Evinrude Motor on Thu Aug 24 19:22:01 2023  I gave it a shot  with no luck On my client (Kubuntu) an  ".eml"  is associated with mime type "message/rfc822"  .  Just adding this to the list seemed to have no effect so there must be more to it than that :}             Re: File/App associations for attachments, posted by Evinrude Motor on Thu Aug 24 19:48:06 2023  You were correct  . This is 100% a browser issue , Thanks for your assistance. Stefan Ritt wrote: Below are the MIME types hard-coded into elogd. As you can see there   line breaks in 'Subject', posted by Evinrude Motor on Sun Aug 13 20:24:41 2023  Certain characters contained in the 'Subject' will cause the text to split into multiple lines . For example if  I enter "My Subject" in the 'Subject' field it is displayed as My       Re: line breaks in 'Subject', posted by Stefan Ritt on Mon Aug 14 08:35:58 2023  There are two locations where 'Subject' is shown, the list display and the individual message display. I guess you mean the first one.  In that case, you can modify the CSS styel sheet 'elog.css' and add following statement to the classes list2 and list2h: .list2 {          Re: line breaks in 'Subject', posted by Evinrude Motor on Mon Aug 14 13:15:38 2023  Thanks for that bit of info . I had looked at that file but the answer was not obvious to me . Now I have to have an ELOG entry about , well , ELOG :} Stefan Ritt wrote: There are two locations where 'Subject' is shown, the list display   export the entries from ELOG to ECSS Word document (Manifacturing Report), posted by Manuela Rigano on Tue Jul 25 17:50:16 2023  HI, Is there a way to export the ELOG entries to a file like Microsoft Word? For ECSS-type documents for space missions, I have to report the data that we enter in the ELOG in a Manufacturing Report, foreseen for ECSS, in       Re: export the entries from ELOG to ECSS Word document (Manifacturing Report), posted by Stefan Ritt on Wed Jul 26 11:32:59 2023  You can just copy-and-paste an elog entry into Word. I tested it here wiht a simple table: one two three four Did a copy-and-paste to Word, and got the thing below.          Re: export the entries from ELOG to ECSS Word document (Manifacturing Report), posted by Manuela Rigano on Wed Jul 26 11:41:40 2023  Thanks a lot Stefan, I asked if it is possible, in general, to create a connection and automatically fill in the tables of a report, or export the data into excell tables to then be connected to the report, having in our case about 24 process tables to be filled in with data or validation, for each report.             Re: export the entries from ELOG to ECSS Word document (Manifacturing Report), posted by Stefan Ritt on Wed Jul 26 14:43:48 2023  You can export logbook entries into a CSV file, then load it into Excel. Stefan Manuela   Nested commands in logbook, posted by Leonardo Tacconi on Wed Jun 14 21:19:48 2023  Hi everybody, I am trying to setup my personal ELog, defining attributes and stuff like that. I just tried to make some nested commands but I really could not achieve that.        Re: Nested commands in logbook, posted by Andreas Luedeke on Sat Jun 17 22:13:01 2023  Atrributes can only be defined once in a logbook. But you can select which attributes are shown with the commands: Show Attributes = <list>   Step by step AD/Kerberos authentication setup, posted by Gys Wuyts on Fri May 26 13:51:16 2023  Newby/noob Q: anybody have a resource other then the orignal doc on how to get ELog working using the domain users/passwords with a Win2K19 AD ? thanks     Step by step AD/Kerberos authentication setup, posted by Gys Wuyts on Fri May 26 13:48:14 2023  Newby/noob Q: anybody have a resource other then the orignal doc on how to get ELog working using the domain users/passwords with a Win2K19 AD    TEXTSIZE too big message, posted by Illam Pakkirisamy on Thu Apr 6 23:20:16 2023  Hi, I'm getting the TEXTSIZE TOO BIG message every time I have more text in my entry.  I understand there is a way to increase the TEXTSIZE and re-compile.  Where can I find the TEXTSIZE parameter that I can increase and also how do I re-compile.       Re: TEXTSIZE too big message, posted by Illam Pakkirisamy on Fri Apr 28 19:47:51 2023  Hi,  any help will be appreciated on this.  I have not still figured this out. Thanks. Illam          Re: TEXTSIZE too big message, posted by Xuan Wu on Sat Apr 29 01:02:30 2023  Hi Illam, You can find it in src/elogd.h, #define TEXT_SIZE  250000, the original value 250000, you can change it to a larger one like #define TEXT_SIZE    1000000. Then recompile it again, just need typing "make". Elog Version is 3.1.3 in my site. HTH.             Re: TEXTSIZE too big message, posted by Illam Pakkirisamy on Wed May 17 17:43:46 2023  Hi Xuan, Sorry for the delayed response.  I just got back from my travel.  I tried your solution, but in my system I don't see elogd.h in the src folder.  Here is what I see and also I don't see any "make" binary in the folders.  I'm running the Windows version.   Quick Filter "New Entries" Button, posted by Trevor Moore on Tue May 9 17:24:37 2023  Hello, I would like to utilize the "New Entries" button on the quick filter bar, but it dates back to 1969.  Is there a way to customize this or fix it?   issue where not all users are able to log into their sessions, posted by cheref mohamed lamine on Tue May 2 02:57:45 2023  I have an issue where not all users are able to log into their sessions and they are still settling on the login page   New elog version 3.1.5, posted by Stefan Ritt on Fri Feb 3 16:54:57 2023  A new version 3.1.5 of elog has been released with all accumulated fixes over the past actually few years. I made a tar file, a RPM, but I could not compile yet a windows version. https://elog.psi.ch/elog/download.html       Re: New elog version 3.1.5, posted by Antonio Bulgheroni on Fri Feb 3 20:26:46 2023  Looking forward to the windows installer.  Thanks a lot and keep up the good work!         Re: New elog version 3.1.5, posted by Finn Junker on Tue Apr 11 12:51:12 2023  Hi Stefan Is there anything the community or forum can help you with or supply for creating a windows version? Kind Regards Finn          Re: New elog version 3.1.5, posted by Laurent Jean-Rigaud on Wed Apr 12 00:09:08 2023  Hi, It's possible to build elogd under windows with cygwin, but not sure that is the best as it requires a lot of dependencies that should be included to dist package to be runnable everywhere.             Re: New elog version 3.1.5, posted by Finn Junker on Wed Apr 12 15:08:15 2023  Hi Laurent It is possible to use the attached but the elogd will not start as a service anymore - is there a fix to that aswell? Kind Regards Finn   HTML Editor not working after enabling SSL, posted by Daniel Sajdyk on Thu Mar 2 12:49:16 2023  Hello, After enabling SSL=1 in /usr/loca/elog/elogd.cfg file, HTML editor loading very long.  After changing SSL to 0, everything work flawlessly.       Re: HTML Editor not working after enabling SSL, posted by Daniel Sajdyk on Thu Mar 9 09:44:32 2023  Hello, I created new certificate, but it doesn't help with resolving this problem. Does someone have and idea how to resolve it?       Re: HTML Editor not working after enabling SSL, posted by Daniel Sajdyk on Tue Mar 21 14:25:25 2023  Hello, I found that someone else had the same issue - https://dev.ckeditor.com/ticket/10874#no1 In Firefox I do not have problems, but in Chrome and Edge i have.    ssl certificate, posted by Giuseppe Cucinotta on Wed Jan 25 17:41:30 2023  We obtained a certificate from let's encrypt in order to replace the self signed certificate provided with elog. We copied the new certificates replacing the older server.crt The problem is that when restarted elog raises an error related to the fact it is looking for server.crt and it doesn't find it anymore.       Re: ssl certificate, posted by Laurent Jean-Rigaud on Wed Jan 25 21:44:51 2023  Hi Giuseppe, The new certificate files should be copy under ssl folder (/usr/local/elog/ssl or /usr/share/elog/ssl by example, closed to templates and script directories) in place of the embedded (autosigned) certificate files enclosed with ELOG source.          Re: ssl certificate, posted by Giuseppe Cucinotta on Wed Jan 25 22:22:07 2023  Hi Laurent, thanks very much! Probably I've copied the certificate in the wrong directory. I'll try ASAP Laurent             Re: ssl certificate, posted by Giuseppe Cucinotta on Fri Feb 17 14:29:54 2023  Hi I'm here again, According to my conf file I run elog under a specified user and group different from root. So I copied the .pem file I obtained from certbot in /etc/ssl as well as /urs/local/elog/ssl and ssl folder in the user directory (I will call it <user-dir>) but when                Re: ssl certificate, posted by Andreas Luedeke on Mon Mar 13 16:16:09 2023  I do run elog under: Usr = elog Grp = elog But that does not change the location of my certificates: they are in "/usr/local/elog/ssl".   Exporting the entries from ELOG, posted by Illam Pakkirisamy on Tue Feb 28 18:21:01 2023  Hi, Is there a way to export the ELOG entries into a file like an Excel sheet or something.  I see import but not export. Appreciate your help.       Re: Exporting the entries from ELOG, posted by Stefan Ritt on Tue Feb 28 19:22:50 2023  Find -> Export to... Illam Pakkirisamy wrote: Hi,          Re: Exporting the entries from ELOG, posted by Illam Pakkirisamy on Wed Mar 1 20:12:54 2023  Thanks Stefan for your help.  It works but the only issue is, the screenshots that were included in the body of the entries are not usable.  Not sure if there is any workarounds for that. ...Illam   3.1.5 - Mass edit bug + Wrong version, posted by Cryptage on Tue Feb 7 12:51:54 2023  Hi, I've just installed the news 3.1.5 version and I have 2 problems. I don't know if it works with older versions because I started with latest.       Re: 3.1.5 - Mass edit bug + Wrong version, posted by Stefan Ritt on Tue Feb 7 16:21:37 2023  I checked and found that the bug which removed the main text was there since the beginning, but it's only triggered if you switch elog to French, it doesn't happen in the English version. I changed a bit the text processing so now it should work also in the French version. I also changed the version number which is shown at the bottom to 3.1.5.          Re: 3.1.5 - Mass edit bug + Wrong version, posted by Cryptage on Tue Feb 7 17:31:20 2023  Thanks for your prompt help. It looks good for text but I still have problem with "select" function (even in English).             Re: 3.1.5 - Mass edit bug + Wrong version, posted by Stefan Ritt on Tue Feb 7 20:45:31 2023  If it works with a simple edit, then why don't you use that one to edit individual values. I checked and version 3.1.4 had already the same problem, so it was not newly introduced. I would have to invest a couple of hours to fix this issue correcly, which I simply don't have right now.                Re: 3.1.5 - Mass edit bug + Wrong version, posted by Cryptage on Wed Feb 8 10:05:03 2023  Thanks ! Sometime I need to edit multiple values to add a new choice. By exemple, if I add a new column "status" (open, closed...) , it's mandatory to use select menu to add the new value to existent   Installing Elog on Linux Oracle 9 and missing libssl.so.10, posted by Daniel Sajdyk on Thu Feb 2 10:58:54 2023  Hello, I  tried to install Elog 3.1.4 from rpm on Oracle Linux 9 with command: sudo dnf localinstall elog-3.1.4-3.el7.x86_64.rpm       Re: Installing Elog on Linux Oracle 9 and missing libssl.so.10, posted by Laurent Jean-Rigaud on Fri Feb 3 15:51:07 2023  Hi Daniel, The RPM has been build for EL7 so SSL share libs should be different with the one provided by EL9. :-) Try to rebuild from tarball source with enclosed buildrpm script (or with elog srpms if you find any : rpm -i elog*.src.rpm && vim ~/rpmbuild/SPEC/elog.spec   CKeditor Settings Cant Be Changed , posted by James Smallcombe on Wed Feb 1 11:13:21 2023  I wanted to change some CKeditor settings so tried modifying elog/scripts/ckeditor to no avail. I wiped elog/scripts/ and dropped a fresh download of CKeditor4, with only the basic extensions. But when I open the elog it still shows the full toolbar, with elog default style and with all extensions operational.       Re: CKeditor Settings Cant Be Changed , posted by Stefan Ritt on Wed Feb 1 11:31:10 2023  elogd checks for the "scripts/ckeditor/ckeditor.js" file to detect the presence of CKeditor. James Smallcombe wrote: I wanted to change some CKeditor settings so tried modifying elog/scripts/ckeditor          Re: CKeditor Settings Cant Be Changed , posted by James Smallcombe on Thu Feb 2 10:13:19 2023  So it was just a clearing cache issue. elogd was telling the browser to use/not use CKeditor based on the aformentioned, and browser was then using the cached version. Fixed now. And FYI for anyone who reads this when trying to modify CKeditor themselves, it seems elog needs the iFrame Editing Area plugin included.             Re: CKeditor Settings Cant Be Changed , posted by Antonio Bulgheroni on Thu Feb 2 10:23:45 2023  It means that you could replace the currently distributed CKeditor with a fresh vanilla installation of CKeditor?  James Smallcombe wrote: So it was just a clearing cache issue. elogd was telling the browser                Re: CKeditor Settings Cant Be Changed , posted by James Smallcombe on Thu Feb 2 10:35:38 2023  Yes replacing the CKeditor folder with a vanila download works without issue, provided you clean the cache. For what I originally wanted to do (modifiying the toolbar) I could have just run elog/scripts/ckeditor/samples/toolbarconfigurator/index.html and edited the config file, but a clean cache is needed (on Chrome, Firefox and Edge).   *.cxx files missing in elog-3.1.5-1.tar.gz, posted by Frank Heyroth on Tue Jan 31 17:40:22 2023  I downloaded the last elog-3.1.5-1.tar.gz to install elog. All *.cxx files are missing.   Wikipedia Article deleted, posted by Sebastian Schenk on Thu Jan 19 15:28:16 2023  Hello, I noticed the wikipedia article of the ELOG got deleted in November 2021.       Re: Wikipedia Article deleted, posted by Stefan Ritt on Thu Jan 19 17:00:37 2023  I agree. I ahead ;-) I think it is not a good idea if the ELOG author pushes on that, but better someone else. Best, Stefan          Re: Wikipedia Article deleted, posted by Andreas Luedeke on Fri Jan 20 10:25:23 2023  It looks to me like only an author of an article can contradict a deletion. I did not find a single method to even comment on the deletion. I am not an Wikipedia expert, can anyone suggest on how to push for the article to be restored? Or do we just write it again, until people stop deleting it?             Re: Wikipedia Article deleted, posted by Sebastian Schenk on Fri Jan 20 13:12:48 2023  I have requested an undeletion of the article. The article was deleted  "PROD", which means that someone tagged it. And if noone removes the tag, it could be deleted. I could revive the article. So in the future, One should have an eye on it and maybe update the current version of the software.                Re: Wikipedia Article deleted, posted by Edmund Blomley on Mon Jan 23 21:21:56 2023  It was now moved to the Draft space (which I did not even now existed so far): https://en.wikipedia.org/wiki/Draft:ELOG Sebastian Schenk wrote: I have requested an undeletion of the article. The article was deleted                    Re: Wikipedia Article deleted, posted by Stefan Ritt on Mon Jan 23 22:24:23 2023  I added some more references, that's about all I can do. Not sure if that is enough. Stefan Edmund                      Re: Wikipedia Article deleted, posted by Edmund Blomley on Tue Jan 24 11:31:59 2023  If I understand it correctly I think it has to be submitted for review with the blue button on that page, just not sure if that should come from your side or someone else Stefan                         Re: Wikipedia Article deleted, posted by Andreas Luedeke on Fri Jan 27 22:25:18 2023  It appears to me that this is a really stupid problem: the article provides many links to sources, but they are just links, not "references". That does not count, since links could be something else than references. I'll try to edit it and transform the list of external links into references to verify the text. Lets hope that this will suffice.                            Re: Wikipedia Article deleted, posted by John Kelly on Sat Jan 28 08:11:05 2023  Wikipedia has been an unreliable source for a very long time, just for the reasons that we are seeing here now with psi and Elog. Those that 'run' Wikipedia are political and authoratative. I have not only had these negative experiences with 'them' but know of many others that have as well. I see no reason why an organization as  ours with such great ideas,  programs and people need to be on their                               Re: Wikipedia Article deleted, posted by David Pilgram on Sat Jan 28 14:26:07 2023  I am rather with John on this. I deliberately stopped contributing to Wikipedia years ago after I added an observation to an entry.  That is, a piece of what could be called original research.  It was shot down in flames for being precisely that: original research.    From what I read in the Draft:Elog   Upload via command line through Apache reverse proxy and load balancer, posted by Tamas Gal on Wed Jan 25 18:41:27 2023  After fiddling around I managed to get ELOG working behind the load balancer HAProxy by stacking ELOG together with an Apache reverse proxy in a Docker stack. I am currently pretty convinced that something with the HTTP communication is somehow faulty in ELOG and Apache is more forgiving than HAProxy, since the configuration is the same as without Apache. So putting ELOG behind an Apache and then Apache behind the HAProxy is working.   Too many redirects when running behind load balancer?, posted by Tamas Gal on Tue Jul 19 11:01:00 2022  We were running ELOG for many many years in our experiments and the instance was operated on a Debian XEN server as a container. I am now trying to migrate it into our Docker Swarm cluster and I am using the https://hub.docker.com/r/de1lz/elog-docker Docker image, which works very well with our logbooks when I run it as a single container. However, when I put the container behind my load balancer (HAProxy) using the simple HTTP mode (which works very       Re: Too many redirects when running behind load balancer?, posted by Stefan Ritt on Tue Jul 19 11:13:09 2022  Probably you need a setting URL = https://elog.test.km3net.de or so in your elogd.cfg file.          Re: Too many redirects when running behind load balancer?, posted by Tamas Gal on Tue Jul 19 11:17:44 2022  Thanks for the quick reply! Sorry, I forgot to paste the "global" part of the config, I have that URL already set: [global] ;Main Settings             Re: Too many redirects when running behind load balancer?, posted by Tamas Gal on Tue Jul 19 11:24:36 2022  I also tried the default configuration (example config) and it that works behind the load balancer. So I guess it's related to the password-page, which causes this redirect loop? Our logbooks are all password protected, so when a logbook URL is clicked, it should first present the login-form, and that's where it chokes.                Re: Too many redirects when running behind load balancer?, posted by Stefan Ritt on Tue Jul 19 11:40:59 2022  Yeah, after you enter a password, elog redirects to what it finds in "URL". You can trace that by opening "development tools" in Google Chrome, go to "network" and watch packets going back and forth. I never worked with the load balancer, but maybe you need a different "URL" containing a '/' at the end?                   Re: Too many redirects when running behind load balancer?, posted by Tamas Gal on Tue Jul 19 12:36:04 2022  My problem is that I don't even reach the page where I can enter a password. If you go to https://elog.test.km3net.de and click on a logbook, you'll see that it immediately goes into a redirect loop. I already logged the routing but there is nothing else... Stefan                      Re: Too many redirects when running behind load balancer?, posted by Tamas Gal on Tue Jul 19 12:38:12 2022  Attached is the log, where you can see that `Operations+IT` redirects to `Operations+IT/` and that redirects to `Operations+IT` again, which then goes to `elog.test.km3net.de` and `Operations+IT` again etc. etc. EDIT: I  use the very same load balancer confugration for dozens of other services incl. Apache, Nginx, GitLab, Mattermost, RocketChat                         Re: Too many redirects when running behind load balancer?, posted by Stefan Ritt on Tue Jul 19 12:48:42 2022  Yes I see the redirects. You say with the example logbook it works, right? Is it the password protection which triggers the problem or anything else? Does it work if you take out the password protection? The key is to identify which setting in your config file triggers the problem, so you can bracket the problem down between the example logbook and your logbook definition.                            Re: Too many redirects when running behind load balancer?, posted by Tamas Gal on Tue Jul 19 12:57:37 2022  Yes, I used the empty `passwd` file from example. When I then click on one of the logbooks, I get to the page where I can register a user (see attached screenshot). After clickin on "Save" for the user registration, I again get the redirect error. Once there is a registered user (i.e. a non-empty password file) the redirect issue is persistent. Any idea where the problem might be? I just emptied the password file again, so you can                               Re: Too many redirects when running behind load balancer?, posted by Tamas Gal on Fri Jan 20 14:11:52 2023  The issue is still present and now it's quite urgent to move this last service into the Swarm. Does anyone maybe have an idea what's wrong? To sum up: if there is a non-empty password file, the login page chokes in an infinite loop of redirects. I am using the same HAProxy load balancer configuration as for all the other services (running Apache, NGINX, GitLab, XWiki, etc.):   Duplicated \n in "plain" format with new WebKit, posted by Andrey on Tue Dec 27 12:44:52 2022  Dear Stefan,  There is a problem with editing an Elog page in "plain" format with the following "User Agent" : "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/16.1 Safari/605.1.15"       bug report to webkit.org , posted by Andrey on Wed Dec 28 16:09:30 2022  It shound't be a "bug report", sorry. I have changed the category to "Info". It seems to be really a bug in the WebKit core. I have created a bug report there. For reference: https://bugs.webkit.org/show_bug.cgi?id=249923         a hack around, posted by Andrey on Thu Dec 29 20:26:11 2022  FYI. Removing "wrap=hard" on the line #11461 in the elogd.cxx file resolves my problem.            a hack around, posted by Konstantin Olchanski on Fri Dec 30 00:46:03 2022  - rsprintf("<textarea rows=%d cols=%d wrap=hard name=\"Text\">\n", height, width); + rsprintf("<textarea rows=%d cols=%d name=\"Text\">\n", height, width);             webkit bug, posted by Andrey Pashnin on Mon Jan 2 12:32:13 2023  FYI They seem to have accepted the bug report:             a hack around, posted by Stefan Ritt on Wed Jan 4 09:33:25 2023  > - rsprintf("<textarea rows=%d cols=%d wrap=hard name=\"Text\">\n", height, width); > + rsprintf("<textarea rows=%d cols=%d name=\"Text\">\n", height, width); >                 a hack around, posted by Stefan Ritt on Wed Jan 4 09:39:38 2023  Ahh, now I remember. Well, the I put that in like 25 years ago ;-) Let's assume the user write a very long line and relies on the wrapping of the text box. So the input might look like the                    editing on a smartphone, posted by Andrey Pashnin on Wed Jan 4 10:05:38 2023  oh! so, that's the cause of another problem I faced a while ago.  When people edited an ELOG page on a narrow screen device (a.k.a smartphone) it put the extra CRLF and made the page look like the attachment below  (it broke the original formatting).                      editing on a smartphone, posted by Stefan Ritt on Wed Jan 4 10:12:43 2023  Yepp, that's right. But without the "wrap=hard", you could get one single long line which is almost impossible to read. So there is no perfect solution for all cases. I see three options                         config option?, posted by Andrey Pashnin on Wed Jan 4 11:03:45 2023  How about adding a config option?  Ideally, it might be nice to have this option "per record" or "per logbook", but "per instance" should be good enough.                            config option?, posted by Stefan Ritt on Wed Jan 4 11:43:00 2023  Ok, I added an option Hard wrap = 0 | 1                               config option?, posted by Andrey Pashnin on Wed Jan 4 11:53:35 2023  That's great! Thank you very much.                          wrap "pre" tag in a "div" with fixed width, posted by Andrey Pashnin on Wed Jan 4 11:39:39 2023  I'm sorry for being annoying...  but I have tried to wrap the <pre> tag in a <div> and it seems to do the trick (the text is a single line with repeating aaa-b-cc sequence)                            wrap "pre" tag in a "div" with fixed width, posted by Stefan Ritt on Wed Jan 4 12:17:46 2023  Didn't work for me. The text is just truncated after the width and no extra lines are added.                               wrap "pre" tag in a "div" with fixed width, posted by Andrey Pashnin on Wed Jan 4 14:05:25 2023  Sorry, I forgot to mention that I also added some styles to the <pre> tag: style="white-space: normal" (see the screenshot on my previous post)                                  wrap "pre" tag in a "div" with fixed width, posted by Stefan Ritt on Wed Jan 4 14:23:12 2023  > Sorry, I forgot to mention that I also added some styles to the <pre> tag: > style="white-space: normal" > (see the screenshot on my previous post)                                     white-space: pre-wrap", posted by Andrey Pashnin on Wed Jan 4 14:38:54 2023  > I guess we want "white-space: pre-wrap" which keeps the old line breaks. Yep. You're right. Thanks!   URL causes elog crash, posted by Germano Massullo on Tue Dec 20 21:16:37 2022  Hello, the following URL https://foo.bar/elog/Shift+Reports/?new_user_name=a2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.com&new_full_name=a2seferewd%40fanneat.com&new_user_email=a2seferewd%40fanneat.com&newpwd=asdf&newpwd2=asdf&cmd=Save causes elog 3.1.4 to crash. I attach full GDB trace       Re: URL causes elog crash, posted by Stefan Ritt on Wed Jan 4 13:38:29 2023  I added a user name validation in the current version. Stefan Germano   Post using html form --> not solved ... , posted by Hayg Guler on Wed Jan 4 11:00:01 2023  Dear All, Just want to come back to this issue I faced. In the config file, I call an html form to format input. The way I call the html file inside my config file is described below.       Re: Post using html form --> not solved ... , posted by Stefan Ritt on Wed Jan 4 12:38:07 2023  When you log in manually to a logbook, a session ID is created and stored in a cookie "sid". On your shift check list you need some code to copy this session ID into your current form. In the code form 2010, I used "unm" and "upwd", but this was removed since it's not safe. So now you need somethign like:   duplicated/extra newlines (LF) after submit with Safari (since 15.4), posted by Andrey on Tue May 10 09:31:40 2022  I think this is a bug report.  However, I am not sure whether the problem is in the new version of Apple's WebKit (15.4) or in the ELOG itself.       reproduced on the latest newly compiled Elogd, posted by Andrey on Tue May 10 10:58:12 2022  I have just setup a new ELOG server on another machine. I took the latest source code from here: http://elog.psi.ch/elog/download/tar/elog-latest.tar.gz. Compiled it and ran.  Still the same problem with Safari.       RESOLVED HERE:, posted by Andrey Pashnin on Wed Jan 4 11:54:55 2023  see https://elog.psi.ch/elogs/Forum/69594       please DELETE this thread, posted by Andrey Pashnin on Wed Jan 4 11:58:19 2023  I added a reply to my previous post about this issue (a few months ago) to point to the solution, but ELOG moved it to the top of the forum.  And I cannot delete this now, because I change my user name from "Andrey" to "Andrey Pashnin" :)   custom css not loaded, posted by Laurent Jean-Rigaud on Fri Dec 2 14:02:49 2022  Hi, I use some CSS for each elog to resize column correcly and it seems that current ELOG version 3.14 available from EPEL for EL7 has a problem (maybe others also).       Re: custom css not loaded, posted by Laurent Jean-Rigaud on Fri Dec 2 14:44:46 2022  Update : i tryed with last git, w/o ldap support and it seems the problem is solved with CCS URL on same machine (just replace the elogd binary from EPEL by new one just build w/o LDAP support and fallback on File to login for testing). So my problem is the error during build with LDAP auth (since using C++) :-(          remove elog from EPEL and Fedora., posted by Konstantin Olchanski on Mon Dec 5 04:15:17 2022  > elogd binary from EPEL thank you for bringing this up to our attention. we recently went through this with debian and ubuntu. the elog package was severely out of date and              remove elog from EPEL and Fedora., posted by Germano Massullo on Tue Dec 20 17:37:42 2022  > > elogd binary from EPEL >  > thank you for bringing this up to our attention. we recently went through this with debian and ubuntu. the elog package was severely out of date and   Buildrpm / copy .cxx in place of .c, posted by Laurent Jean-Rigaud on Fri Dec 2 14:12:35 2022  Hi Stefan, It seems buildrpm should be updated to take care of cpp files. Plz replace "cp <blahblah>.c ..." by "cp <blahblah>.cxx ..." .   Planned maintenance at the top of ELOG listing, posted by Finn Junker on Mon Nov 21 09:46:46 2022  We use our instance of ELOG as a operations log so that newest events are sorted at the top. Sometimes we are also up front informed about planned maintenance, and i would be nice to could "pin" them at the top - before the sorting, so that operatores could have them in mind when starting a new shift. Have anyone found a way to solve this?       Re: Planned maintenance at the top of ELOG listing, posted by David Pilgram on Mon Nov 21 13:32:04 2022  The way to do this is to ensure that the date of the entry is in the future.  As a hard -core linux (ab)user of elog, I create an entry, then dive into the yymmdda.log files, and edit it so that the date at the top of the entry is, for example, Sat, 31 Dec 2022 23:59:59.  Then, that entry will remain at the top of the listings until the New Year.  I do this very thing for the very same reason, i.e. to keep one entry at the top of the listings   Post using html form , posted by Hayg Guler on Thu Oct 20 16:52:09 2022  Dear All, we are trying to post from an HTML form, as included in our config file :         Re: Post using html form , posted by Stefan Ritt on Tue Oct 25 09:45:41 2022  Probably people have to log in to the logbook before opening the form. I guess the "submit not allowed" comes from the fact that they access the logbook as a guest. Stefan          Re: Post using html form , posted by Hayg Guler on Wed Nov 16 12:01:29 2022  Dear Stefan, that is strange since I logged in ...  It seems like when I go in the shift check topic in the elog, it does not get my login id ... is there something coming from the HTML file that   User groups, posted by Ralph Biggins on Sat Nov 5 15:21:44 2022  Is it possible to have within elog (defined in password file?) a user group so that only those members of a group have certain elements visible?   Up to date windows version, posted by Finn Junker on Thu Oct 20 10:04:51 2022  Dear Developers I know this topic i on and off in this forum but it seems the only updated versions of Elog are in the linux binaries. Have anybody been able to compile       Re: Up to date windows version, posted by Antonio Bulgheroni on Thu Oct 20 10:10:12 2022  I'm also supporting this request.  > Dear Developers       Re: Up to date windows version, posted by Laurent Jean-Rigaud on Thu Oct 20 13:13:16 2022  > Dear Developers >           Re: Up to date windows version, posted by Finn Junker on Fri Oct 21 09:25:37 2022  > > Dear Developers >  > >              Re: Up to date windows version, posted by Laurent Jean-Rigaud on Fri Oct 21 17:09:37 2022  Hi Finn, I've just tested the same archive on new laptop with Windows 11.                 Re: Up to date windows version, posted by Finn Junker on Mon Oct 24 14:55:44 2022  > Hi Finn, >  > I've just tested the same archive on new laptop with Windows 11.    UNC Pfade, posted by Michael on Wed Oct 19 13:52:24 2022  Hallo, gibt es eine Möglichkeit das subdir auf ein Netzlaufwerk zu legen? \\server\freigabe\...       Re: UNC Pfade, posted by Stefan Ritt on Wed Oct 19 14:08:15 2022  UNCs are not officially supported by elog, but your operating system might map them if you're lucky, just try. It is however not recommended to do so, since network drives can sometimes be slow during network congestion and the response of elog will then suffer. Stefan          Re: UNC Pfade, posted by Michael on Thu Oct 20 07:53:31 2022  So there is no way to save the file on the network?! :( Can i install the elog on a windows server? i tried it yesterday, but i think i missed something, couse i only could open the elog on the server and not with a client pc.             Re: UNC Pfade, posted by Antonio Bulgheroni on Thu Oct 20 08:37:23 2022  I'm running ELOG on a windows server 2016. Just installed the windows installer and worked out of the box.  Have you checked the firewall? Michael   Duplicating attachments when editing an entry via command line elog.exe, posted by Antonio Bulgheroni on Wed Oct 19 14:19:39 2022  Hi there!  I have noticed this effect when editing entries with the command line elog.exe. Let's say I submit a new entry via the command line and I'm also submitting an attachment file. If I check the elog entry via the browser   Anyone else running elogd on redhat ES 8 having random crashes?, posted by mathew goebel on Tue Oct 4 20:43:28 2022  For the last couple of months we are getting a random elogd crash once in a while we are getting something like the following in the middle of the night > Sep 29 20:45:07 elog kernel: server_name686835]: segfault at 7ffd7f5a0000 ip 00007fceaeabbf06 sp 00007ffd7f577348 error 6 in libc-2.28.so[7fceaea8a000+1bc000]       Re: Anyone else running elogd on redhat ES 8 having random crashes?, posted by Stefan Ritt on Wed Oct 5 08:21:12 2022  Most likely these are some currupt logbook files. If you get a coredump (or stack trace) you can maybe figure out which file it was. These are plain ASCII files (YYMMDDa.log) and you can see with an editor if someting there is not in order. Stefan          Re: Anyone else running elogd on redhat ES 8 having random crashes?, posted by mathew goebel on Wed Oct 5 20:39:16 2022  Thanks for the info!  Stefan Ritt wrote: Most likely these are some currupt logbook files. If you get a coredump   Finden Sie das beste Herrenhemd für den Büroalltag bei https://brandmarkt.ch/ in St. Gallen, posted by Brandmarkt on Thu Sep 29 08:52:05 2022  Herrenhemden in St. Gallen Titel: Finden Sie das beste Herrenhemd für den Büroalltag bei brandmarkt in St. Gallen Wenn es darum geht, sich für die Arbeit zu kleiden, ist es am besten, eine Vielzahl von zuverlässigen Büromodellen zur Verfügung   Need help with permission, posted by Dan Witteman on Fri Sep 23 01:32:15 2022  Hello, I have just installed elog onto an ubuntu focal server using <sudo make install> and I am unable to create new entries. When I access the log via a windows PC connected to the local network, I can see the demo logbook with the 1 test post, but I cannot create or       Re: Need help with permission, posted by Mikkel D. Lund on Mon Sep 26 12:21:52 2022  Hi all, I have the same problem on Ubuntu 22.04. I have compiled from the latest tarball and copied all our logbooks from our old Ubuntu 18.04 server to a new Ubuntu 22.04. The logbooks does however not appear when I log in, so I assume ELOG doesn't have read access either?          Re: Need help with permission, posted by Stefan Ritt on Mon Sep 26 12:38:29 2022  Permissions are handled by the operating system and have nothing to do with elog. Make sure you run elog under an account which has write access to the desired directories. Consult Ubuntu documentation how to do that. Sometimes it's helpful to start elog interactively with the -v flag to see some verbose output. Maybe you can spot something there.             Re: Need help with permission, posted by Stefan Ritt on Mon Sep 26 12:45:50 2022  Sometimes this can also be an SELinux issue, if you have that service running. Try "journalctl | grep denied" to see denied resources and consult the SELinux documentation on how to fix that. Stefan                Re: Need help with permission, posted by Dan Witteman on Mon Sep 26 19:21:33 2022  I used "chown" to pass permissions from root to my deafult user, then restarted the service and now I can make posts. Thank you! Stefan Ritt wrote: Sometimes this can also be an SELinux issue, if you have that service   Change timestamp button from UTC, posted by Hawkins Clay on Tue Sep 20 22:31:29 2022      Elog with out SMTP, posted by Paul Paquette on Fri Sep 9 20:01:15 2022      By Passing the Email requirements for Elog, posted by Paul Paquette on Fri Sep 9 19:42:05 2022  Hello Sir,         I'v been a long time user fo Elog for about 14 years.  We use it for indexing our Zoning Board of Adjustment Meeting Minutes for Decision on Properties within the Town of Hampton.  Is it possibel to by-pass the SMTP mailer for building logins and password changes.   We are   Unable to add user, posted by Uwe Vollbracht on Sat Aug 6 18:38:50 2022  Hi, we're using elog to handle various logbooks. It's a great tool by the way.        Re: Unable to add user, posted by Stefan Ritt on Mon Aug 8 08:26:11 2022  I recommend to clear all your browser cookies for the elog server. Sometimes an old cookie confuses the access mechanism.          Re: Unable to add user, posted by Uwe Vollbracht on Mon Aug 8 14:06:28 2022  Thanks for answering. Just tried your suggestion with different browsers (firefox, chrome, brave) but the error message still appears when adding a       Re: Unable to add user, posted by Konstantin Olchanski on Mon Aug 8 20:52:17 2022  >       Error: Command "config" is not allowed for user "" Could it be related to the error messages thrown by "activate user"? see   OSX Issues, posted by Florian Heigl on Tue Jul 5 19:10:48 2022  Hi, I have an issue with my local elog setup. it's usable but one function is just not working. Problem I'm getting weird error messages when trying to write or read entries from the CLI client. I have googled a lot and most elog client examples are not giving the actual output, more like elog -h <host> -p <myport> -a ...       Re: OSX Issues, posted by Stefan Ritt on Fri Jul 29 14:22:00 2022  I just tried the same on my latpop (MacOSX 12.4) and it worked flawlessly: ritt@MBP14 build % echo "blah" | ./elog -h 127.0.0.1 -p 8080 -l demo -r 2 -x Message successfully transmitted, ID=3   Paid version , posted by Vasio on Mon Jul 4 12:34:13 2022  Good day all , does Elog has a paid version that is not open soureced          Re: Paid version , posted by Stefan Ritt on Thu Jul 7 10:56:39 2022  There is only an open source version. Vasio wrote: Good day all ,   Paid version , posted by Vasio on Mon Jul 4 12:32:01 2022  Good day all , does Elog has a paid version that is not open soureced      Slow performance, posted by Alan Grant on Tue Jun 28 18:53:50 2022  We're up to 30 logbooks, 3.2GB data total and Elog damen has now become slow. Performance stats show 100%CPU on startup then reduces. Searches and general UI activity is slow. It runs on a VM with 4GB memory allocated. Up to 15 concurrent users. Trimming and archiving some data files may help but I gather overall this is underpowered hardware in this instance so what is recommended       Re: Slow performance, posted by Andreas Luedeke on Sat Jul 2 14:39:41 2022  We have 68 logbooks and currently 60 GB data total. We run it as well on a VM, in our case with 8GB RAM. The speed of ELOG is mostly given by the filesystem: when we had AFS it was very slow. With NFS it was better. But we now use a local disk on the VM: that is much better.   Edit entry from command line and appending attachment, posted by Andrea Capra on Sun Jun 26 01:47:02 2022  I would like to edit an existing entry by adding new attachments at each call of elog from the command line. If I issue   ladp Invalid user name or password!, posted by Fred Nerks on Wed May 11 09:54:17 2022  Hi I am running elog on windows 2022 server and trying to use ldap for Auth. No matter what i do I cannot get it to authenticate against the DC. Invalid user name or password!       Re: ladp Invalid user name or password!, posted by Fred Nerks on Mon May 23 07:48:40 2022    Fred Nerks wrote: Hi I am running elog on windows 2022 server and trying to use ldap   PDF preview special steps to enable, posted by Konstantin Olchanski on Fri May 6 21:12:11 2022  Ubuntu LTS 20.04 and others have elog PDF preview disabled by default. To enable, please follow these steps, see https://daq00.triumf.ca/DaqWiki/index.php/Ubuntu#Enable_elog_PDF_preview       Re: PDF preview special steps to enable, posted by Stefan Ritt on Tue May 10 22:40:26 2022  I have a PDF file created by root which ImageMagic cannot convert to a .png file. If I do convert img.pdf img.png   elog root path, posted by Antonio Bulgheroni on Thu May 5 11:14:20 2022  Dear all,  I have a question for you. On my elog server I have plenty of images not included in any logbook entry, but that nevertheless I would the user to have access to that via the browser. In order words, I would like to have a link like this https://myelog/my_pics_folder/my_pic.png   Vulnerability?, posted by Alessandro Petrolini on Thu Mar 3 08:26:40 2022  Hi, I have been using elog for years at CERN. Now I installed in my local workstation at my home inistitue and sysadmin reported the following vulnerabilities:       Re: Vulnerability?, posted by Konstantin Olchanski on Thu Mar 3 16:49:40 2022  The CVEs you refer to are very old and have been fixed a long time ago. Please refer to:          Re: Vulnerability?, posted by Alessandro Petrolini on Fri Mar 4 08:51:24 2022  Ok, many many thanks! I will pass the info to my sysadmin. Best Regards.             Re: Vulnerability?, posted by Alessandro Petrolini on Sun Mar 6 09:00:33 2022  > Ok, many many thanks! > I will pass the info to my sysadmin. > Best Regards.                Re: Vulnerability?, posted by Konstantin Olchanski on Sun Mar 6 17:33:04 2022  > > > The CVEs you refer to are very old and have been fixed a long time ago. >  > Am I wrong that the windows executable version on the site is dated 2018? 3.1.4-2?                   Re: Vulnerability?, posted by Stefan Ritt on Mon Mar 7 08:49:41 2022  > I trust Stefan is reading this thread and will do something about it. My vote would > be to remove the download link to the windows executables and ask Debian to remove > the elog package. I think they have a way for upstream developers (Stefan) to request                      Re: Vulnerability?, posted by Daniel Pfuhl on Mon Mar 7 14:30:16 2022  >  > Yeah, I have to recompile the Windows version. Unfortunately my old Windows PC is gone, I                      Re: Vulnerability?, posted by Jan Just Keijser on Mon Mar 7 17:46:39 2022  > > I trust Stefan is reading this thread and will do something about it. My vote would > > be to remove the download link to the windows executables and ask Debian to remove > > the elog package. I think they have a way for upstream developers (Stefan) to request                         Re: Vulnerability?, posted by Jan Just Keijser on Wed Mar 9 17:55:31 2022  I've built the last C version of elog in git, revision 1ebfd06c using mingw-64 ; the resulting binaries work for me on Windows 2019. Attached is a zip file with the binaries. I was not able to create a new installer, these are just the executables                            Re: Vulnerability?, posted by Daniel Pfuhl on Tue Apr 19 15:47:59 2022  > I've built the last C version of elog in git, revision 1ebfd06c using mingw-64 ; the resulting binaries work for me on Windows 2019. > Attached is a zip file with the binaries. > I was not able to create a new installer, these are just the executables                               Re: Vulnerability?, posted by Jan Just Keijser on Tue Apr 19 17:02:57 2022  > > I've built the last C version of elog in git, revision 1ebfd06c using mingw-64 ; the resulting binaries work for me on Windows 2019. > > Attached is a zip file with the binaries. > > I was not able to create a new installer, these are just the executables                                  Re: Vulnerability?, posted by Daniel Pfuhl on Tue Apr 19 20:13:04 2022  > > > I've built the last C version of elog in git, revision 1ebfd06c using mingw-64 ; the resulting binaries work for me on Windows 2019. > > > Attached is a zip file with the binaries. > > > I was not able to create a new installer, these are just the executables                                     Re: Vulnerability?, posted by Jan Just Keijser on Fri Apr 22 17:10:24 2022  > > > > I've built the last C version of elog in git, revision 1ebfd06c using mingw-64 ; the resulting binaries work for me on Windows 2019. > > > > Attached is a zip file with the binaries. > > > > I was not able to create a new installer, these are just the executables                      Re: Vulnerability?, posted by Laurent Jean-Rigaud on Mon Mar 7 22:07:54 2022  > > I trust Stefan is reading this thread and will do something about it. My vote would > > be to remove the download link to the windows executables and ask Debian to remove > > the elog package. I think they have a way for upstream developers (Stefan) to request                      Re: Vulnerability?, posted by Florian Heigl on Mon Apr 18 19:16:36 2022  > > I trust Stefan is reading this thread and will do something about it. My vote would > > be to remove the download link to the windows executables and ask Debian to remove > > the elog package. I think they have a way for upstream developers (Stefan) to request                         Re: Vulnerability?, posted by Konstantin Olchanski on Tue Apr 19 21:15:19 2022  > it would be good if the current state was listed in https://elog.psi.ch/elogs/Vulnerabilities/ > It seems there's now updated builds for at least windows                            Re: Vulnerability?, posted by Konstantin Olchanski on Fri Apr 22 21:15:37 2022  > > debian package still outdated? > We reached to the package maintainer                               Re: Vulnerability?, posted by Konstantin Olchanski on Tue Apr 26 17:39:49 2022  > > > debian package still outdated? > removed from debian-unstable > https://tracker.debian.org/pkg/elog                                  history of long-removed freebsd package, Re: Vulnerability?, posted by Konstantin Olchanski on Tue Apr 26 18:03:03 2022  > > > > debian package still outdated? the freebsd elog package was removed back in 2014 during                                  Re: Vulnerability?, posted by Konstantin Olchanski on Wed Apr 27 19:36:25 2022  > next is to request removal of ubuntu package. contacted ubuntu security team, got very quick response.                         Re: Vulnerability?, posted by Andreas Luedeke on Fri Apr 22 12:55:21 2022    > it would be good if the current state was listed in https://elog.psi.ch/elogs/Vulnerabilities/  > It seems there's now updated builds for at least windows, and the debian package still outdated?          Re: Vulnerability?, posted by Konstantin Olchanski on Sat Apr 23 18:05:57 2022  > The CVEs you refer to are very old and have been fixed a long time ago. >  > Please refer to:   Download attachments from command line, posted by Maarten de Jong on Sat Apr 16 10:37:24 2022  Would it be possible to download attachments (e.g. with elog or wget) from the command line?       Re: Download attachments from command line, posted by Stefan Ritt on Tue Apr 19 10:24:47 2022  Sure. Just figure out the URL from your browser and then use it in wget, e.g. wget https://elog.psi.ch/elogs/Forum/220309_175728/elog-3.1.4-1ebfd06c-win64.zip to download one attachement from this forum.          Re: Download attachments from command line, posted by Maarten de Jong on Thu Apr 21 14:19:35 2022  Thanks - I can confirm that the given command works. However, for an e-log with username and password protection, this no longer seems to work. It would be very useful if the elog command can be used to also download attachments (and not only a message).   recovery of elog from backup disk, posted by neerajan nepal on Wed Apr 13 16:31:27 2022  Hello, I do have a backup of elog repository in an external disk (with a directory name .elog). I want to install this repository to a new linux (either ubuntu 20.xx or Cent OS 7) computer. I am new to this, can someone please provide me an instructions sheet.        Re: recovery of elog from backup disk, posted by Konstantin Olchanski on Mon Apr 18 21:01:23 2022  unfortunately instructions do not exist to cover every possible situation. but in general, to migrate elog to a new machine, I would say do this:          Re: recovery of elog from backup disk, posted by neerajan nepal on Thu Apr 21 03:45:20 2022  > unfortunately instructions do not exist to cover every possible situation. >  > but in general, to migrate elog to a new machine, I would say do this:   Dynamic substitution with date , posted by Antonio Bulgheroni on Wed Apr 20 14:19:08 2022  Dear all,  I would need your help with an incremental index with date information. I want to have an incremental number made by the last two digits of the year, the two digits of the month and an incremental four digits number.    "User stamp" icon like Time Stamp in Body, posted by Gys Wuyts on Tue Apr 12 08:55:55 2022  Hello, Is there a possibility to use like the time stamp a user stamp: by clicking the button in the main text entry it adds the username, just like the time stamp button does: Tue Apr 12 08:58:46 2022 ?   crash with attachment with very long filename, posted by Stefano Lacaprara on Fri Mar 25 10:07:37 2022  Hi,   I'm running  elogd 3.1.4 built Jan 27 2021, 09:56:34 revision 395e101a       Re: crash with attachment with very long filename, posted by Stefan Ritt on Mon Mar 28 14:04:18 2022  Hi Stefano, well, why in heaven's name do you run 200+ chars file names? I see that they are generated probably automatically, but I guess you will run in all kinds          Re: crash with attachment with very long filename, posted by Stefano Lacaprara on Tue Mar 29 11:31:55 2022  Hi Stefan,      Unformatted Appearance of Elog, posted by Greg Christian on Thu Mar 17 18:22:37 2022  I recently ported an elog over to a new server running Ubuntu 20.10. Everything is working okay, except sometimes I get a strange unformatted appearance when I go to the elog page (see attachment). The happening of this seems random. For example, yesterday, when I started the elogd daemon everything looked fine, but when I log in today I get the unformatted appearance. Also, yesterday when I was setting things up, sometimes certain logbooks would have the       Re: Unformatted Appearance of Elog, posted by Greg Christian on Tue Mar 22 17:58:32 2022  In trying to fix this, I have re-downloaded the source from github rather than the source at http://elog.psi.ch/elog/download/tar/elog-latest.tar.gz, which is apparently very different from what is on github. Now I am running ELOG V3.1.4-d828aa58   Removal of ID and Date attributes, posted by James Darrow on Sun Mar 13 21:20:56 2022  Hello all, I just found elog which is a great piece  of software! I'm implementing it for use to log my shortwave listening contacts. The problem that I have is I'm moving over a current log to elog which already has a date of when the record was created, which is important.I renamed the old       Re: Removal of ID and Date attributes, posted by Stefan Ritt on Mon Mar 14 08:49:44 2022  Use the configuration option List display = Day, Station Type, Start time UTC, ... as written in the documentation.          Re: Removal of ID and Date attributes, posted by James Darrow on Mon Mar 14 18:45:14 2022  That worked! Thanks Stefan Stefan Ritt wrote: Use the configuration option   Use different HTML class for drafts compared to not existing entries, posted by Edmund Hertle on Wed Mar 9 16:25:31 2022  Right now a Draft shows a red error indication, that the entry is currently a draft. For the CSS styling it uses the HTML class="errormsg". The same class is also used if an entry does not exist. Would it be possible for the draft version to use a different HTML class (for example class="draftmsg")? It can also use the same visual   Invalid activation code, posted by Konstantin Olchanski on Wed Mar 2 18:29:08 2022  Something is not right with the elog account activation, I get the email for "Registration request for ELOG logbook "haicu"", but when I follow the given URL, I get "Invalid activation code". Account activation requests go to two people,       Re: Invalid activation code, posted by Konstantin Olchanski on Wed Mar 2 23:15:11 2022  > Something is not right with the elog account activation... I did a test:   login cookie confusion, posted by Konstantin Olchanski on Wed Mar 2 18:35:48 2022  we had an elog with only one logbook and one password file, we added a second logbook with a second password file and everything broke.   elog c++ and LDAP, posted by Laurent Jean-Rigaud on Wed Feb 16 22:24:18 2022  Hi Stefan, I've seen that ELOG is build now with gcc-c++ now, so i tried to check rpmbuild script with all options. It seems that ldap api is different with c++ (quick search : https://www.openldap.org/lists/openldap-software/200706/msg00177.html) and elogd can not been build anymore with ldap support.   make all messages on ubuntu LTS 20.04.03, posted by Konstantin Olchanski on Tue Feb 8 00:52:47 2022  For the record, compiler messages from elog tip of branch elog/master. Most of the stuff is the usual same-old that we mostly fixed in midas:       Re: make all messages on ubuntu LTS 20.04.03, posted by Stefan Ritt on Tue Feb 8 09:14:25 2022  > /usr/include/x86_64-linux-gnu/bits/stdio2.h:36:10: note: ‘__builtin___sprintf_chk’ output 2 or more bytes (assuming 4097) into a  > destination of size 4096          Re: make all messages on ubuntu LTS 20.04.03, posted by Stefan Ritt on Tue Feb 15 13:45:02 2022  Well, I bit the bullet and fixed all of these warnings. Took me like two days of work, but now should be fine. You might want to test it again. I only have gcc 9.2.0, there it compiles now without warning.             Re: make all messages on ubuntu LTS 20.04.03, posted by Konstantin Olchanski on Tue Feb 15 20:55:02 2022  > Well, I bit the bullet and fixed all of these warnings. Took me like two days of work, but now should be fine. > You might want to test it again.                Re: make all messages on ubuntu LTS 20.04.03, posted by Stefan Ritt on Wed Feb 16 08:45:15 2022  I fixed these as well, please have a look again. BTW, midas had a few of these as well. Stefan                   Re: make all messages on ubuntu LTS 20.04.03, posted by Konstantin Olchanski on Wed Feb 16 20:01:17 2022  > I fixed these as well, please have a look again. BTW, midas had a few of these as well. confirmed. elog commit d828aa58305ee8ce2ae882c0ff3c34cfa66650e5   ELOG problems with certificates, posted by Ezio Zanghellini on Thu Feb 10 19:03:56 2022  Recently I have had problems with ELOG not accepting the certificates (in this case from https://letsencrypt.org/) probably due to the old version of the SSL library of the binary distribution for Windows. I have tried to follow the instructions to set up ELOG to work with Apache but they are probably old.   "New User" option does not work when Authentication=Webserver, posted by Jan Just Keijser on Fri May 29 09:27:32 2020  Our setup uses "Authentication=Webserver" + no automatic user registration. Thus, logbook admins should add a user by clicking "Config"  and then "New user". However, no matter what they fill in in the "new user " dialog, as soon as they hit "Save" an error pops up saying that their username (the admin one, not the new one) already exists. I found the following code:       Re: "New User" option does not work when Authentication=Webserver, posted by Stefan Ritt on Tue Aug 4 13:29:23 2020  Unfortunately I locallly don't have Webserver authentication, so I cannot check or debug. If you send me a diff that works for you, I'm happy to incorporate it. Stefan          Re: "New User" option does not work when Authentication=Webserver, posted by Jan Just Keijser on Wed Aug 18 09:05:51 2021  here's the patch that I use to enable  use creation and deletion in combination with Webserver authentication. The idea behind the patch is that if the user logged in via  "http_user" is an elog admin, then {s}he is allowed to save a random user configuration, including creating or deleting a user.             Re: "New User" option does not work when Authentication=Webserver, posted by Stefan Ritt on Thu Feb 10 17:32:42 2022  Thanks for your patch, I committed it. Stefan   Password File Config Issue, posted by Mark Delaney on Fri Feb 4 23:35:27 2022  I expanded an elog server from 1 to 3 logbooks. For each logbook there is a separate password file defined.  When I try to add a new user in one of the 2 new logbooks using config => new user, it adds the user to the password file for the original logbook.       Re: Password File Config Issue, posted by Stefan Ritt on Thu Feb 10 14:02:15 2022  Can you try the "top groups" option, which means putting each logbook into a separate top group as described in the documentation. For us this works well, new users are only added to the right password file. There is however the problem that as admin you might be logged in to several logbooks (as remembered in your browser via cookies), so you might want to log out from all logbooks first (or clear all cookies of elog), then log in to one logbook   Default "Author" when replying to a log entry, posted by Jan Just Keijser on Tue Feb 1 15:39:38 2022  what is the default value for "Author" when replying to a log entry ?  I now see that for each reply to a log entry, the value of "Author" is set to the value of the author of the original entry - this makes it very hard to see which user has replied to a particular log entry, especially when users start replying to replies etc.       Re: Default "Author" when replying to a log entry, posted by Stefan Ritt on Tue Feb 1 15:43:00 2022  As you can see, on this forum the author for replies is correct. This is done via the config option: Preset on reply Author = $long_name Jan          Re: Default "Author" when replying to a log entry, posted by Jan Just Keijser on Tue Feb 1 16:43:34 2022  Excellent, exactly what I was looking for, many thanks!   Stefan   elog@Ubuntu 18.04, posted by Carsten Winkler on Sat Jan 29 09:05:47 2022  Hello, I try to start elog at Ubuntu 18.04. When I run sudo /usr/local/sbin/elogd -D -c /usr/local/elog/elogd.cfg I get following error:       Re: elog@Ubuntu 18.04, posted by Stefan Ritt on Mon Jan 31 09:10:41 2022  Looks like you don't have shared libraries correctly configured on your system. Try "ldconfig" on your system or link elogd statically (google how to do that). Stefan          Re: elog@Ubuntu 18.04, posted by Carsten Winkler on Tue Feb 1 09:13:40 2022  sudo ldconfig didn't solve the problem Is there any other solution than elog static linking?             Re: elog@Ubuntu 18.04, posted by Carsten Winkler on Tue Feb 1 16:16:34 2022  downloading the sources and building them on the target system solved the problem Carsten Winkler wrote: sudo ldconfig   Text formatting panel inside entries, posted by Mariia Fedkevych on Fri Jan 28 17:49:35 2022  Hello! How can I make appear the text formatting panel (above the main text body field) inside entries?   Adjustment of summary columns, posted by Mariia Fedkevych on Fri Dec 17 11:54:38 2021  Hi! Is it possible to manage the column widths on a logbook's summary page one by one?       Re: Adjustment of summary columns, posted by Stefan Ritt on Fri Dec 17 12:11:22 2021  You can manually modify the CSS style to adjust column widths. Locate elog.css which resides under elog/themes/default/elog.css, then find the class “.listtitle”, and modify the line width: 0%;          Re: Adjustment of summary columns, posted by Mariia Fedkevych on Fri Jan 28 17:37:55 2022  Thank you! Stefan Ritt wrote: You can manually modify the CSS style to adjust column widths. Locate   Spurious characters in the searched string, posted by Olivier Callot on Mon Sep 26 08:13:10 2011  Hi, We have a problem with the search command: Since our last upgrade to v2.9.0-2418 the searched string is pre- and postfixed with ASCII character expressed in % format, see the attached image. The searched string is prefied with %255E and postfxed by %2524 in the URL. And teh search fails. This affects       Re: Spurious characters in the searched string, posted by Stefan Ritt on Mon Sep 26 10:38:59 2011                            Olivier Callot wrote:                                            Hi,          Re: Spurious characters in the searched string, posted by Olivier Callot on Mon Sep 26 11:16:19 2011                            Stefan Ritt wrote:                                                   Re: Spurious characters in the searched string, posted by Olivier Callot on Mon Sep 26 14:49:48 2011                            Olivier Callot wrote:                                                   Re: Spurious characters in the searched string, posted by Phil Rubin on Mon Jan 3 19:11:08 2022  Hi, Ten years later...this problem shows up in my installation behind Apache, affecting only drop-down menu searches.  Test installations with elog serving itself do not show the problem, so I presume it has something to do with Apache configuration, re-routing, etc.  Unfortunately, this   Unclear how to use the command line tool /usr/bin/elog, posted by Jose Caballero on Wed Dec 1 12:37:57 2021  Hello,   I am trying first time to use the tool /usr/bin/elog. From the documentation is not clear to if everything must be in quotes or not, if every       Re: Unclear how to use the command line tool /usr/bin/elog, posted by Stefan Ritt on Wed Dec 1 13:05:14 2021  Please issue the elog command with an added "-v" flag and post the output here. Stefan Jose          Re: Unclear how to use the command line tool /usr/bin/elog, posted by Jose Caballero on Tue Dec 7 08:28:19 2021  Hi Stefan, Here is the, I believe, relevant part of the output: -------------------------------------------------             Re: Unclear how to use the command line tool /usr/bin/elog, posted by Andreas Luedeke on Tue Dec 7 11:56:37 2021  If you need HTTPS then you must specify the "-s" option. You could have looked into the help of the elog command: > elog -h                Re: Unclear how to use the command line tool /usr/bin/elog, posted by Jose Caballero on Tue Dec 7 14:25:37 2021  This is what I get with -s: --------------------------------- Successfully connected to host elog-1.matrix.com, port 80                   Re: Unclear how to use the command line tool /usr/bin/elog, posted by Stefan Ritt on Tue Dec 7 14:46:16 2021  If you use HTTPS, you have to connect to port 443 of your server, using the "-p" option. Furthermore, you run under an Apache server, right? How do you do the redirecting to elogd? I guess you specified a subdir in the URL named /LogBook to redirect to elogd. The you use another part of the URL to select the logbook, which again might be "LogBook". Is that correct? So your full                      Re: Unclear how to use the command line tool /usr/bin/elog, posted by Jose Caballero on Tue Dec 7 15:09:36 2021  Not really. The full URL in the browser is https://elog-1.matrix.com/LogBook. That's why I am trying with "-h elog-1.matrix.com -l LogBook" I have just tried with -p, here is the full output: [root@elog-1 ~]# /usr/bin/elog -h elog-1.matrix.com -p 443 -v -x -l LogBook                         Re: Unclear how to use the command line tool /usr/bin/elog, posted by Stefan Ritt on Tue Dec 7 17:50:37 2021  The reply from the server Response received: HTTP/1.1 404 Not Found                            Re: Unclear how to use the command line tool /usr/bin/elog, posted by Jose Caballero on Wed Dec 8 10:49:20 2021  I don't see anything in httpd logs. I am just reusing an entry I created via web, so the attributes are correct. Nothing is missing, correct spelling, etc.  I keep trying.  BTW, I have just realized that the output of "elog -h" does not "man log", which is the one I have been using so far.                         Re: Unclear how to use the command line tool /usr/bin/elog, posted by Andreas Luedeke on Tue Dec 7 18:24:42 2021  But this is real progress! Now elog successfully connected, and all your data was transmitted, but elogd refused your content. A possible explanation is that one required attribute of this logbook was not provided in your elog command, or that one value of an attribute does not match any allowed value for that attribute.                            Re: Unclear how to use the command line tool /usr/bin/elog, posted by Stefan Ritt on Wed Dec 8 10:59:58 2021  Ok, you Apache listes on two ports. On port 80 with HTTP and on port 443 with HTTPS. If you connect to port 80, there is no fowarding to elogd, that's why Apach complains  The requested URL /LogBook/ was not found on this server.                               Re: Unclear how to use the command line tool /usr/bin/elog, posted by Jose Caballero on Wed Dec 8 11:23:48 2021  Thanks for the comments. I will pass them to the admins.    Stefan                                  Re: Unclear how to use the command line tool /usr/bin/elog, posted by Jose Caballero on Wed Dec 8 12:05:43 2021  With curl, I get this as part of the output: <table class="dlgframe" width="50%" cellpadding="1" cellspacing="0"<tr><td class="errormsg">Error: Command "<b>Submit</b>" not allowed</td></tr> Hopefully                                     Re: Unclear how to use the command line tool /usr/bin/elog, posted by Stefan Ritt on Wed Dec 8 13:19:55 2021  That reply indicates that the login was not successful. So something went wrong with the authentication. You can try to switch off passwords to see if that makes a difference. Jose                                  Re: Unclear how to use the command line tool /usr/bin/elog, posted by Stefan Ritt on Thu Dec 9 10:33:09 2021  Have you tried to connect directly to elogd and not going through Apache?  Jose Caballero wrote: Thanks for the comments. I will pass them to the admins.                                      Re: Unclear how to use the command line tool /usr/bin/elog, posted by Jose Caballero on Thu Dec 9 21:58:08 2021  Nope. How? Is it documented?  Stefan Ritt wrote: Have you tried to connect directly to elogd and not going through Apache?                                         Re: Unclear how to use the command line tool /usr/bin/elog, posted by Andreas Luedeke on Fri Dec 10 21:41:05 2021  It is the default. If you install ELOG on your PC and run it, then every access will be directly to the ELOG web service. If you want to have Apache inbetween, it is some extra effort. Jose                                           Re: Unclear how to use the command line tool /usr/bin/elog, posted by Jose Caballero on Tue Dec 14 21:42:45 2021  Hi Andreas, I realize from your response that my question was not clear. I was not asking how to get it. Note that I am just a regular user, I am not the administrator of the service.                                              Re: Unclear how to use the command line tool /usr/bin/elog, posted by Andreas Luedeke on Thu Dec 16 18:24:41 2021  Now you've totally lost me. elogd is a web service. You connect to it with a web browser. You don't pass arguments at startup of the service that refers to specific atrributes. I have no idea what you intend to do, you need to explain a lot more.                                                 Re: Unclear how to use the command line tool /usr/bin/elog, posted by Jose Caballero on Thu Dec 16 21:34:05 2021  Hi Andreas.  It seems I didn't fully understand the comment by Stefan when he said "Have you tried to connect directly to elogd and not going through Apache?". My bad.    Logfile not registering entry numbers?, posted by Sergio Navarrete on Fri Oct 19 08:38:06 2018  I have configured a logbook with the logfile on, but when a user replies to an entry the line logged goes Date Time [User@IP] {Logbook} NEW entry #0 How can I make the #0 be the real entry number for the reply?       Re: Logfile not registering entry numbers?, posted by Andreas Luedeke on Fri Oct 19 13:08:30 2018  It looks like you've found a bug in ELOG. I've checked my elog.log and see that all NEW entry lines show "#0". I've looked into the code: the message is written before the new entry is submitted, and only then the entry ID is defined. For new entries one would need to make the logging print line later - but that would blow up the code. The message IDs are correct for saving          Re: Logfile not registering entry numbers?, posted by David Pilgram on Mon Oct 29 14:26:28 2018  As a regular elog (ab)user, I have seen this behaviour from time to time.  So far as I recall, the cause actually is that a normal entry is looking for the entry in the "Reply to" field of the normal entry in the yymmdda.log file.  When that entry does not exist, then I see a duplicate line of an entry with entry "#0", in emboldened black type.  I did have a screenshot, but cannot find it for now.              Re: Logfile not registering entry numbers?, posted by Stefan Ritt on Wed Apr 1 15:57:27 2020  I finally found some time to fix that bug. Was just that the log file hat #0, the bug should not have had any ohter side effects. Now the logfile is fine. David                Re: Logfile not registering entry numbers?, posted by Sergio Navarrete on Thu Dec 16 08:23:22 2021  It seems that the latest Windows binary still predates this fix. Will there be a new installer soon? Thanks for your support. Stefan Ritt wrote: I finally found some time to fix that bug. Was just that the log file   Log4j exploit, posted by Alan Grant on Tue Dec 14 19:16:57 2021  Is there any potential impact/concern with the Log4j exploit in Elog applications?         Re: Log4j exploit, posted by Stefan Ritt on Tue Dec 14 21:55:16 2021  ELog does not use the Log4j library so no issue there. If you run a web server like Apache in front of ELog, you however have to check if you use log4j there. Alan   Dump screenshot to new elog entry, posted by Anthony J Krishock on Sun Dec 12 01:18:46 2021  Hello, I am interested in finding a preferrably single-click way to capture a screenshot and posting it automatically to a new elog entry . I would be doing this from Windows. Is this possible?       Re: Dump screenshot to new elog entry, posted by Andreas Luedeke on Sun Dec 12 08:12:57 2021  I am no Windows expert. An option is to write your own application and use the "elog" command to post the output of the application to your ELOG. There is as well a python library to access ELOG via http: https://github.com/paulscherrerinstitute/py_elog   $attribute replacement fails occasionally, posted by Chris Körner on Sat Nov 27 21:48:41 2021  Hi, In our setup we have multiple logbooks. I want a convenient way to search all logbooks for an attribute (in our case with the name Sample-ID) by just clicking it in the list display of any logbook.Therefore, in the [global] section I put "List Change Sample-ID = <a href="https://ourelog.com/$logbook/?all=1&Sample-ID=$Sample-ID"</a>.       Re: $attribute replacement fails occasionally, posted by Chris Körner on Sat Dec 4 13:03:32 2021  This problen drives me crazy. Under some circumstances the List Change <attribute> function does not replace $attribute. It happens at random circumstances when I use the Find function to search all logbooks. In the resulting list, it fails reproducibly for certain entries of certain logbooks. But I cannot find what is special about those lokbooks or entries. In different Find requests it works perfectly fine.    Display edit time, posted by Devrim Esenturk on Wed Nov 24 08:12:17 2021  Hi I have a large logbook to keep office demo equipments listed. So editing entries are very often, I would like to see last editing time on my entry as entry time shown as each entry. Is there any way to do this? I checked all attributes and commands  but couldn't find any.       Re: Display edit time, posted by Stefan Ritt on Wed Nov 24 08:38:33 2021  Creat an attribute "last edit" and set it to the last edit time. Something like this: Attributes = ...., Last edit Preset Last edit = $date   Body of new messages not getting saved when submitted, posted by Harry Martin on Sun Nov 21 23:20:15 2021  I've been using elog for a few years now.  I've had the current setup working for me up until today.   If I create a new message (entry, whatever they are called), or if I attempt to update an existing message, only the header information is saved.  The body (the part I can see in the editor) does not get saved.       Re: Body of new messages not getting saved when submitted, posted by Sebastian Schenk on Sun Nov 21 23:49:42 2021  Hello Harry, the elog server (elogd) is a standalone application written in C and contains a full webserver and logfile management system. There are no other dependencies to apache or python.          Re: Body of new messages not getting saved when submitted, posted by Harry Martin on Mon Nov 22 00:44:21 2021  Thank you for your quick response, Sebastion.  The new version of ckeditor is 4.5.7 -- is this version compatible with elog 3.1.2?  It is possible that I am using an outdated elog or outdated ckeditor due to the fact that this server is a bit old; I am looking to upgrade this machine soon, but I have several other issues to resolve first.             Re: Body of new messages not getting saved when submitted, posted by Harry Martin on Mon Nov 22 19:28:28 2021  (disregard my recent post here about missing package -- that wasn't the elog server!) I can see that ckeditor was upgraded 11/19, which is would be prior to my recent attempts to use elog.  It was apparently a security update, so I am not sure it is sensible to downgrade.  OTOH, I am the only person here, and I have all sides carefully barracaded, so I don't think it                Re: Body of new messages not getting saved when submitted, posted by Harry Martin on Mon Nov 22 19:45:08 2021  After downgrading ckeditor, my elog installation is working again.  Thanks for your help. Harry Martin wrote: (disregard my recent post here about missing package -- that wasn't   Restrict edit time = 0 behavior intended?, posted by Chris Körner on Mon Nov 15 11:35:55 2021  Hi, I have set the options "Restrict edit time = 24" and "Admin restrict edit time = 0" in [global]. This way can only edit entries for 24 hours while the admin can forever. I now want a single logbook where all users have unlimited time to edit entries. However, setting "Restrict       Re: Restrict edit time = 0 behavior intended?, posted by Chris Körner on Mon Nov 15 11:48:25 2021  Actually this is related to post 68993 from Sebastian Schenk in Jul 2019. Are there any new workarounds I may have missed? Chris          Re: Restrict edit time = 0 behavior intended?, posted by Sebastian Schenk on Mon Nov 15 14:02:42 2021  Hi Chris, my old entry was related to the admin options of edit time. The option "Admin restrict edit time" was implemented later, see ab8b98c             Re: Restrict edit time = 0 behavior intended?, posted by Chris Körner on Tue Nov 16 15:14:42 2021  Hi Sebastian, thanks for the reply. It is just a bit confusing that these similar settings behave so differently. For me it is no big deal to set the time for every logbook independently instead of [global], but it leaves more room for configuration errors.   Shared logbook and elog.cfg file across multiple installations, posted by Anthony on Mon Nov 15 15:41:04 2021  Hi, I'm wondering if it's possible to have a shared logbook and elog.cfg between multiple instances of elog.  Ideally, I'd like to have my logbooks folder and elog.cfg hosted on a nextcloud instance while running the elog service locally.  I've tried this using symlinks       Re: Shared logbook and elog.cfg file across multiple installations, posted by Sebastian Schenk on Mon Nov 15 17:40:08 2021  Hi Anthony, the elog has a mirroring function, which synchornizes config and logs between multiple instances. See the bottom section of https://elog.psi.ch/elog/config.html          Re: Shared logbook and elog.cfg file across multiple installations, posted by Anthony on Tue Nov 16 13:05:05 2021  Thank you Sebastian! I admittidely haven't looked through the page in a while, so I completely missed this feature.  This should solve the problem, although in a slightly different implementation than what I was trying for.   results of security scan, posted by David Stops on Mon Nov 1 12:52:23 2021  Recently central IT scanned our elog server and reported the following "vulnerabilities" 42873 (1) - SSL Medium Strength Cipher Suites Supported (SWEET32) 51192 (1) - SSL Certificate Cannot Be Trusted 65821 (1) - SSL RC4 Cipher Suites Supported (Bar Mitzvah) 85582 (1) - Web Application Potentially Vulnerable to Clickjacking Is       Re: results of security scan, posted by Stefan Ritt on Tue Nov 2 12:07:46 2021  The elgod.c progarm itself is rather weak in SSL, since I just don't have time to catch up with the latest SSL enhancements. The safest you can do is to put an industry-strenth web server like Apache in front of elogd and let that server handle the SSL layer. Stefan          Re: results of security scan, posted by David Stops on Thu Nov 4 13:48:00 2021  Thanks, I'll try that and see what happens   David   While mirroring, data fields not preserved, posted by Rob Calkins on Tue Oct 26 01:21:01 2021  While running two e-log books that were mirrored, I ended up with the situation of two entries with the same number/id.  The mirroring did what it said it would, increment the local logbook entry and grab the entry from the remote logbook. However, when it did, it did not preserve the fields in the log book that are specified in the config file such as "Author", "Priority", "Subject" ect.  I ended up with a very   Too many open files - issue?, posted by Rob Calkins on Fri Oct 15 23:57:38 2021  Has anyone had issues with having too many files open? I'll setup my server and let it go but after a while, I end up with a lot of "cannot create socket: Too many open files" errors being reported.  I have a sync to another e-log going which I suspect is part of the cause since that e-log server hasn't had this issue. I suspect that there are files being opened, going into some return loop code and then never getting closed. I'm       Re: Too many open files - issue?, posted by Stefan Ritt on Mon Oct 25 13:34:06 2021  The code segements you show are from the command line tool elog.c, not the server elogd.c. The tool is called to submit a new message from the command line. Even if there would be a file not properly closed, it will be closed by the operating system once the program finishes. So no problem of too many open files there.   Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:15:33 2005  Hi again! I have one question concerning the logbook configuration. Normally, clicking on "List" takes me to the first page of the list view. Is it possible to configure the logbook so that "List" takes me to the last page instead?       Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 12:16:38 2005  [quote="Yoshio Imai"]Is it possible to configure the logbook so that "List" takes me to the last page instead?[/quote] Reverse sort = 1          Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:39:44 2005  [quote="Stefan Ritt"] Reverse sort = 1[/quote]             Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:05:26 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] Start page = 0?cmd=last                Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:12:46 2005  Thanks! For the moment, I could satisfy the users by setting the start page to the "All" view, but if it can be implemented in a future version, this would come very handy.                Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:14:19 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] What about                   Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:24:27 2005  [quote="Stefan Ritt"] What about Start page = last10                      Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 20:36:55 2005  Ok, I implemented the last page display per default in revision 1538. If "reverse sort = 0" the last page is shown and if "reverse sort = 1" the first page is shown by default. This way one always sees the page with the latest entries. I hope this accomodates everybody. If not, please complain and I could make it a switch (yet another option ;( ).                         Re: Display last page by default, posted by Yoshio Imai on Mon Oct 31 01:39:52 2005  I have installed the new version, and it works just fine. It is also MUCH faster than my intermediate solution. [quote] For the moment, I could satisfy the users by setting the start page to the "All" view   Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:15:33 2005  Hi again! I have one question concerning the logbook configuration. Normally, clicking on "List" takes me to the first page of the list view. Is it possible to configure the logbook so that "List" takes me to the last page instead?       Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 12:16:38 2005  [quote="Yoshio Imai"]Is it possible to configure the logbook so that "List" takes me to the last page instead?[/quote] Reverse sort = 1          Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:39:44 2005  [quote="Stefan Ritt"] Reverse sort = 1[/quote]             Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:05:26 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] Start page = 0?cmd=last                Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:12:46 2005  Thanks! For the moment, I could satisfy the users by setting the start page to the "All" view, but if it can be implemented in a future version, this would come very handy.                Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:14:19 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] What about                   Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:24:27 2005  [quote="Stefan Ritt"] What about Start page = last10                      Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 20:36:55 2005  Ok, I implemented the last page display per default in revision 1538. If "reverse sort = 0" the last page is shown and if "reverse sort = 1" the first page is shown by default. This way one always sees the page with the latest entries. I hope this accomodates everybody. If not, please complain and I could make it a switch (yet another option ;( ).                         Re: Display last page by default, posted by Yoshio Imai on Mon Oct 31 01:39:52 2005  I have installed the new version, and it works just fine. It is also MUCH faster than my intermediate solution. [quote] For the moment, I could satisfy the users by setting the start page to the "All" view   Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:15:33 2005  Hi again! I have one question concerning the logbook configuration. Normally, clicking on "List" takes me to the first page of the list view. Is it possible to configure the logbook so that "List" takes me to the last page instead?       Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 12:16:38 2005  [quote="Yoshio Imai"]Is it possible to configure the logbook so that "List" takes me to the last page instead?[/quote] Reverse sort = 1          Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:39:44 2005  [quote="Stefan Ritt"] Reverse sort = 1[/quote]             Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:05:26 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] Start page = 0?cmd=last                Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:12:46 2005  Thanks! For the moment, I could satisfy the users by setting the start page to the "All" view, but if it can be implemented in a future version, this would come very handy.                Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:14:19 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] What about                   Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:24:27 2005  [quote="Stefan Ritt"] What about Start page = last10                      Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 20:36:55 2005  Ok, I implemented the last page display per default in revision 1538. If "reverse sort = 0" the last page is shown and if "reverse sort = 1" the first page is shown by default. This way one always sees the page with the latest entries. I hope this accomodates everybody. If not, please complain and I could make it a switch (yet another option ;( ).                         Re: Display last page by default, posted by Yoshio Imai on Mon Oct 31 01:39:52 2005  I have installed the new version, and it works just fine. It is also MUCH faster than my intermediate solution. [quote] For the moment, I could satisfy the users by setting the start page to the "All" view   Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:15:33 2005  Hi again! I have one question concerning the logbook configuration. Normally, clicking on "List" takes me to the first page of the list view. Is it possible to configure the logbook so that "List" takes me to the last page instead?       Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 12:16:38 2005  [quote="Yoshio Imai"]Is it possible to configure the logbook so that "List" takes me to the last page instead?[/quote] Reverse sort = 1          Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:39:44 2005  [quote="Stefan Ritt"] Reverse sort = 1[/quote]             Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:05:26 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] Start page = 0?cmd=last                Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:12:46 2005  Thanks! For the moment, I could satisfy the users by setting the start page to the "All" view, but if it can be implemented in a future version, this would come very handy.                Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:14:19 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] What about                   Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:24:27 2005  [quote="Stefan Ritt"] What about Start page = last10                      Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 20:36:55 2005  Ok, I implemented the last page display per default in revision 1538. If "reverse sort = 0" the last page is shown and if "reverse sort = 1" the first page is shown by default. This way one always sees the page with the latest entries. I hope this accomodates everybody. If not, please complain and I could make it a switch (yet another option ;( ).                         Re: Display last page by default, posted by Yoshio Imai on Mon Oct 31 01:39:52 2005  I have installed the new version, and it works just fine. It is also MUCH faster than my intermediate solution. [quote] For the moment, I could satisfy the users by setting the start page to the "All" view   Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:15:33 2005  Hi again! I have one question concerning the logbook configuration. Normally, clicking on "List" takes me to the first page of the list view. Is it possible to configure the logbook so that "List" takes me to the last page instead?       Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 12:16:38 2005  [quote="Yoshio Imai"]Is it possible to configure the logbook so that "List" takes me to the last page instead?[/quote] Reverse sort = 1          Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:39:44 2005  [quote="Stefan Ritt"] Reverse sort = 1[/quote]             Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:05:26 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] Start page = 0?cmd=last                Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:12:46 2005  Thanks! For the moment, I could satisfy the users by setting the start page to the "All" view, but if it can be implemented in a future version, this would come very handy.                Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:14:19 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] What about                   Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:24:27 2005  [quote="Stefan Ritt"] What about Start page = last10                      Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 20:36:55 2005  Ok, I implemented the last page display per default in revision 1538. If "reverse sort = 0" the last page is shown and if "reverse sort = 1" the first page is shown by default. This way one always sees the page with the latest entries. I hope this accomodates everybody. If not, please complain and I could make it a switch (yet another option ;( ).                         Re: Display last page by default, posted by Yoshio Imai on Mon Oct 31 01:39:52 2005  I have installed the new version, and it works just fine. It is also MUCH faster than my intermediate solution. [quote] For the moment, I could satisfy the users by setting the start page to the "All" view   Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:15:33 2005  Hi again! I have one question concerning the logbook configuration. Normally, clicking on "List" takes me to the first page of the list view. Is it possible to configure the logbook so that "List" takes me to the last page instead?       Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 12:16:38 2005  [quote="Yoshio Imai"]Is it possible to configure the logbook so that "List" takes me to the last page instead?[/quote] Reverse sort = 1          Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:39:44 2005  [quote="Stefan Ritt"] Reverse sort = 1[/quote]             Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:05:26 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] Start page = 0?cmd=last                Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:12:46 2005  Thanks! For the moment, I could satisfy the users by setting the start page to the "All" view, but if it can be implemented in a future version, this would come very handy.                Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:14:19 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] What about                   Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:24:27 2005  [quote="Stefan Ritt"] What about Start page = last10                      Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 20:36:55 2005  Ok, I implemented the last page display per default in revision 1538. If "reverse sort = 0" the last page is shown and if "reverse sort = 1" the first page is shown by default. This way one always sees the page with the latest entries. I hope this accomodates everybody. If not, please complain and I could make it a switch (yet another option ;( ).                         Re: Display last page by default, posted by Yoshio Imai on Mon Oct 31 01:39:52 2005  I have installed the new version, and it works just fine. It is also MUCH faster than my intermediate solution. [quote] For the moment, I could satisfy the users by setting the start page to the "All" view   Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:15:33 2005  Hi again! I have one question concerning the logbook configuration. Normally, clicking on "List" takes me to the first page of the list view. Is it possible to configure the logbook so that "List" takes me to the last page instead?       Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 12:16:38 2005  [quote="Yoshio Imai"]Is it possible to configure the logbook so that "List" takes me to the last page instead?[/quote] Reverse sort = 1          Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:39:44 2005  [quote="Stefan Ritt"] Reverse sort = 1[/quote]             Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:05:26 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] Start page = 0?cmd=last                Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:12:46 2005  Thanks! For the moment, I could satisfy the users by setting the start page to the "All" view, but if it can be implemented in a future version, this would come very handy.                Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:14:19 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] What about                   Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:24:27 2005  [quote="Stefan Ritt"] What about Start page = last10                      Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 20:36:55 2005  Ok, I implemented the last page display per default in revision 1538. If "reverse sort = 0" the last page is shown and if "reverse sort = 1" the first page is shown by default. This way one always sees the page with the latest entries. I hope this accomodates everybody. If not, please complain and I could make it a switch (yet another option ;( ).                         Re: Display last page by default, posted by Yoshio Imai on Mon Oct 31 01:39:52 2005  I have installed the new version, and it works just fine. It is also MUCH faster than my intermediate solution. [quote] For the moment, I could satisfy the users by setting the start page to the "All" view   Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:15:33 2005  Hi again! I have one question concerning the logbook configuration. Normally, clicking on "List" takes me to the first page of the list view. Is it possible to configure the logbook so that "List" takes me to the last page instead?       Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 12:16:38 2005  [quote="Yoshio Imai"]Is it possible to configure the logbook so that "List" takes me to the last page instead?[/quote] Reverse sort = 1          Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:39:44 2005  [quote="Stefan Ritt"] Reverse sort = 1[/quote]             Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:05:26 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] Start page = 0?cmd=last                Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:12:46 2005  Thanks! For the moment, I could satisfy the users by setting the start page to the "All" view, but if it can be implemented in a future version, this would come very handy.                Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:14:19 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] What about                   Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:24:27 2005  [quote="Stefan Ritt"] What about Start page = last10                      Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 20:36:55 2005  Ok, I implemented the last page display per default in revision 1538. If "reverse sort = 0" the last page is shown and if "reverse sort = 1" the first page is shown by default. This way one always sees the page with the latest entries. I hope this accomodates everybody. If not, please complain and I could make it a switch (yet another option ;( ).                         Re: Display last page by default, posted by Yoshio Imai on Mon Oct 31 01:39:52 2005  I have installed the new version, and it works just fine. It is also MUCH faster than my intermediate solution. [quote] For the moment, I could satisfy the users by setting the start page to the "All" view   Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:15:33 2005  Hi again! I have one question concerning the logbook configuration. Normally, clicking on "List" takes me to the first page of the list view. Is it possible to configure the logbook so that "List" takes me to the last page instead?       Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 12:16:38 2005  [quote="Yoshio Imai"]Is it possible to configure the logbook so that "List" takes me to the last page instead?[/quote] Reverse sort = 1          Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:39:44 2005  [quote="Stefan Ritt"] Reverse sort = 1[/quote]             Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:05:26 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] Start page = 0?cmd=last                Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:12:46 2005  Thanks! For the moment, I could satisfy the users by setting the start page to the "All" view, but if it can be implemented in a future version, this would come very handy.                Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:14:19 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] What about                   Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:24:27 2005  [quote="Stefan Ritt"] What about Start page = last10                      Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 20:36:55 2005  Ok, I implemented the last page display per default in revision 1538. If "reverse sort = 0" the last page is shown and if "reverse sort = 1" the first page is shown by default. This way one always sees the page with the latest entries. I hope this accomodates everybody. If not, please complain and I could make it a switch (yet another option ;( ).                         Re: Display last page by default, posted by Yoshio Imai on Mon Oct 31 01:39:52 2005  I have installed the new version, and it works just fine. It is also MUCH faster than my intermediate solution. [quote] For the moment, I could satisfy the users by setting the start page to the "All" view   wrong server HTTP status code when login failed, posted by Chris Körner on Thu Oct 21 14:57:14 2021  Hi, I am trying to access elog through a python client (https://github.com/paulscherrerinstitute/py_elog) and found a strage strange behavior which may be related server side problem. The python script generates get/post messages via the python requests library. This works fine so far and I can view       Re: wrong server HTTP status code when login failed, posted by Chris Körner on Thu Oct 21 15:19:16 2021  Seems like I've discovered another bug here related to umlauts in my name. :D  I was submitting this post and forgot to put an icon. Elog seems to have saved a copy of my message, which I could not edit since my username does not match the bugged name saved for this message.   wrong server HTTP status code when login failed, posted by Chris Körner on Thu Oct 21 15:17:52 2021  Hi, I am trying to access elog through a python client (https://github.com/paulscherrerinstitute/py_elog) and found a strage strange behavior which may be related server side problem. The python script generates get/post messages via the python requests library. This works fine so far and I can view   How about string constants in config files?, posted by Andreas Luedeke on Thu Oct 21 11:15:20 2021  My config files are often large and use some shell scripting. In these shell scripting part I interact with files and execute scripts in specific folder. It would be nice to have the ability to define for example a file path once and reuse it in different parts of the config file. It would help to make config files cleaner. For example:   Redirect in Execute new needs space after ">", posted by Andreas Luedeke on Thu Oct 21 11:00:46 2021  EDIT: forget the tip below. Instead just call script files: inline scripting in the ELOG config shows very strange behavior. Doing the same in external scripts works reliable.     How to access PSI Elog data from other web clients , posted by Lin Wang on Wed Oct 13 02:38:34 2021  We want to develop separate mobile web pages for the web applications deployed at CSNS accelerator, including the PSI Elog. In Elog, is there RESTful API or HTTP/JSON or HTTP/XML interface for other web clients to access? Or is there any workaround?       Re: How to access PSI Elog data from other web clients , posted by Stefan Ritt on Wed Oct 13 08:17:23 2021  When elog has been developed, REST did not yet exist. The closest you can get is the RSS API. Just try https://elog.psi.ch/elogs/Forum/elog.rdf and you see the result for this forum. To write to elog, you can use teh HTTP/HTML interface and mimic a browser. See for example elog:69209 Stefan       Re: How to access PSI Elog data from other web clients , posted by Andreas Luedeke on Thu Oct 21 00:42:42 2021  There is a python API to access ELOG via HTTP: https://github.com/paulscherrerinstitute/py_elog Lin Wang wrote: We want to develop separate mobile web pages for the web applications   Reverse proxy of Elog using Docker and Nginx?, posted by Andrew Wade on Mon Aug 13 21:09:30 2018  I've been trying to configured a Synology NAS to run my personal elog with a reverse proxy to the outside world.  The best way seems to be running Elog in a Docker instance and then running a separate connected Docker running a nginx-proxy (in this case jwilder/nginx-proxy). This second container manages the certificates to letsencrypt and mapping URL requests to relevant containers so that connection is secured properly.         Re: Reverse proxy of Elog using Docker and Nginx?, posted by Stefan Ritt on Tue Aug 14 06:04:53 2018  Have you tried the "URL = ..." statement? This determines you elog redirects if you log in. If you reach elog through a proxy, the URL is a different one that if you access it directly. In your case the proxy URL might be necessary. Stefan          Re: Reverse proxy of Elog using Docker and Nginx?, posted by Andrew Wade on Fri Aug 17 22:07:41 2018  Yes, I tried setting the URL parameter to the url used by the proxy.  It goes to the correct address but that landing is the login page. Andrew Stefan             Re: Reverse proxy of Elog using Docker and Nginx?, posted by Stefan Ritt on Mon Aug 20 12:42:24 2018  Actually this forum works through an Apache reverse proxy with authentication and it works, so I suspect that the problem has to do with jwilder/nginx-proxy. Since we don't have this here, all I can propose is that you do debugging yourself. Run elogd with the -v flag so that you see all requests coming from the user through the proxy. Compare the requests through Apache and Nginx to see if any argumets are stripped or mangled. Upon successful login, elog                Re: Reverse proxy of Elog using Docker and Nginx?, posted by Andrew Wade on Tue Aug 28 23:38:55 2018  It does indeed seem to be a cookie stripping issue.  I just need to figure out how to get Nginx to forward these properly. Thanks for the help. Stefan                   Re: Reverse proxy of Elog using Docker and Nginx?, posted by Bolko Beutner on Wed Sep 15 13:52:59 2021  I have the same problem -- did you find a solution in using the nginx revese proxy with user login? Andrew Wade wrote: It does indeed seem to be a cookie stripping issue.  I just need   How to lock a specific entry?, posted by Manoel Couder on Tue Sep 14 17:48:52 2021  Hi All, I am using elog to track technical changes in an experiment but also to log what experimentalist are doing during an experiment. For the latter, I would like to be able to lock those entries from being further edited after the expertiment if finished. Is there a way to do that?       Re: How to lock a specific entry?, posted by Stefan Ritt on Tue Sep 14 18:18:03 2021  You can either lock all entries or none. So I would propose you set up two logbooks, one for technical changes which is not locked and one for what experimentalists are doing which is locked. Locking can be done a certain time after an entry has been made (like 1h, 1d, 1 month etc.). Or you simply make the logbook read-only.   Large log file size, posted by Alan Grant on Mon Aug 30 03:08:15 2021  Can the size of the application log file affect performance?       Re: Large log file size, posted by Stefan Ritt on Mon Aug 30 08:41:14 2021  If the logbook files are getting big, searching text in entries can take quite some time. But if you have a log file logging all activities, that should not slow down elog since the server just appends at the end of that file which is a quick operation. Alan   Adding entries without being logged in stopped working with attachments, posted by Andreas Luedeke on Sat Aug 28 21:32:09 2021  Hi Stefan (et al), we have several logbooks that allow to add new entries without logging in first. That still works, as long as these entries don't have any attachments.   Logging Main page entries, each with multiple ongoing events , posted by Alan Grant on Wed Jul 21 16:16:29 2021  Is there any way to log child events on the detail pages for a fixed number of entries on the main page? For example, I have 15 vehicles to enter on the main page, ID'd by Vehicle Number. Within each of those entries I will be logging ongoing repair service entries with certain attributes. So how might I design this concept without having repeating vehicle entries on the main page for every service event, and preferably without   Deny option and Guest commands, posted by Janusz Szuba on Mon Jul 19 18:41:29 2021  Hi,  I have a logbook with guest access and guest can also enter a new entry (in config: Guest List Menu commands = New, Find, Select, Login). For other reason in a global section, I put    Drop attachments here..., posted by Xuan Wu on Wed Jun 23 03:48:22 2021  The function of "Drop attachments here..." is only for root user? I'd like it could be used by all users.       Re: Drop attachments here..., posted by Sebastian Schenk on Mon Jun 28 14:53:44 2021  I can't confirm this behavoiur. In our instance, every user can use the attachment function of the elog. Either through "Drag&Drop" or "Browse&Upload" in the entry editor. What do you mean by "root" user?          Re: Drop attachments here..., posted by Xuan Wu on Mon Jun 28 18:41:31 2021  I just used my own account to test the "Drag&Drop" function in this forum ,  and it failed.  In our case, we need to upload ten more images into logbook at once, it's more effective to use "Drag&Drop" than "Browse&Upload" feature for "Browse&Upload" only can choose one attachment at once, but "Drag&Drop" can choose several attachments at once. The admin user can use this             Re: Drop attachments here..., posted by Sebastian Schenk on Tue Jun 29 15:21:06 2021  In my testings I didn't found this behaviour, but my collegues also reported this issue. So I searched for the difference between my test setup and the production logbooks. I believe the "restrict edit = 1" config option may be responsible for this behaviour.                Re: Drop attachments here..., posted by Sebastian Schenk on Tue Jun 29 20:13:36 2021  I could figure out the bug. A fix can be found in this commit. https://bitbucket.org/merrx/elog/commits/c3e3c4af9666006558aaf26d8f4841800e69f9af Sebastian                   Re: Drop attachments here..., posted by Stefan Ritt on Tue Jun 29 20:20:38 2021  Looks good, I merged the pull request.                      Re: Drop attachments here..., posted by Sebastian Schenk on Wed Jun 30 13:50:08 2021  Thanks for the merge. I found a more general solution, as there could be the posibility to have the author as "select" or "radio box" input in the form, where the fix breaks.                   Re: Drop attachments here..., posted by Xuan Wu on Wed Jun 30 04:38:21 2021  Excellent, Thanks! Sebastian Schenk wrote: I could figure out the bug. A fix can be found in this commit.   Timezome problem, posted by Maxim on Wed Jun 23 15:28:00 2021  Good afternoon! The elog does not see the time zone. It displays UTC + 0. When I transfer old entries to a new compiled log, they are displayed 3 hours earlier (my time zone is UTC + 3). When creating a new record, it creates them in the UTC + 0.   Problem with a self-compiled code., posted by Maxim on Mon May 31 14:51:39 2021  Dear, sir! There is a problem with a configuration file. The code was compiled by Cygwin (gcc-core, gcc-g++, make, gdb, libssl-dev).  After a compilation a reference to our own css-file was written in configuration file and css-file was included in a folder “themes/default” of the project.       Re: Problem with a self-compiled code., posted by Sebastian Schenk on Thu Jun 3 16:02:02 2021  Hello Maxim, I just stumbled on a similar issue. Also with a self-compiled elogd on Ubuntu. We also use a custom css and by clicking on the "New" or "Reply" or "Duplicate" the elog generates the entry editor.          Re: Problem with a self-compiled code., posted by Maxim on Wed Jun 23 14:08:15 2021  Good afternoon Sebastian! Thank you very much for your help. Sebastian   when using webserver authentication, how can I restrict the users that can edit any given elog?, posted by Christian Ospelkaus on Sat Jun 19 18:38:21 2021  Dear elog users & developers, the subject line says it all: when using webserver authentication, how is it possible to restict access of users to any given elog? Only using the apche rules? Admin user and Login user do not seem to be doing anything for me. I am using elog as packaged by debian for buster, using an apache ssl       Re: when using webserver authentication, how can I restrict the users that can edit any given elog?, posted by Christian Ospelkaus on Sun Jun 20 14:38:06 2021  Dear all, I figured it out. Current global config is (using kerberos instead) [global]   How to format a column in list display?, posted by Andreas Luedeke on Fri Apr 23 20:08:10 2021  There is the nice conditional formatting feature for List display: Cell Style <attribute> <value> = <style> I would like to use it without conditions: some attributes should always be formatted in a specific way.   Specifically I want a generated attribute (combined from other attributes) to be display in monospace font. The       Bug Report with CSS includes (was Re: How to format a column in list display?), posted by Andreas Luedeke on Mon Jun 14 17:25:02 2021  Okay, found some solution for my problem: List Change Pikett = <div class="pikett">$Pikett</div> CSS=pikett.css And file themes/default/pikett.css contains:          Bug Report with CSS includes (was Re: How to format a column in list display?), posted by Sebastian Schenk on Mon Jun 14 18:51:59 2021  Hi Andreas, the bug you have found was already reported in an earlier issue, together with the same solution you have found. https://elog.psi.ch/elogs/Forum/69368   Request: make $text available for "subst", posted by Andreas Luedeke on Mon Mar 22 14:56:12 2021  Hi Stefan, I've just tried to read the $text with subst into another field and failed. It looks like $text is only available for the execution of shell scripts in the "execute new|edit|delete = <script>" command.       Re: Request: make $text available for "subst", posted by Stefan Ritt on Mon Mar 22 15:10:12 2021  $text is the full body text and can go over many lines. Since attributes are restricted to single lines, it's not possible to substitute them with the body text. Stefan          Re: Request: make $text available for "subst", posted by Andreas Luedeke on Mon Mar 22 19:59:13 2021  While the input widget of text attributes is a single line, they can easily be multi-line in the display - when you use HTML at least. And of course the user can parse the text field and generate a single line, if he wants to. If you leave it to me, I'll create wonderful applications to that feature :-)             Re: Request: make $text available for "subst", posted by Stefan Ritt on Wed Mar 24 10:06:26 2021  Sure, attributes can be shown multi-line, but they cannot be stored in the elog internal database. The database is a very old design and only allows for single line attributes. Just look at a YYMMDDa.log file and you will see that. I would have to change the database format to somethign more advanced like XML, but that would take me a couple of weeks or months.                Re: Request: make $text available for "subst", posted by Andreas Luedeke on Wed Mar 24 22:09:56 2021  Hi Stefan, no problem: if I just strip all newlines from the $text field (in HTML you use <br> anyway, the newline has no function apart from whitespace), and my multiline attribute is fine to go.                   Re: Request: make $text available for "subst", posted by Andreas Luedeke on Mon Jun 14 18:06:06 2021  I should tell that I found a simpler way to achieve the same: I suppress the "text" field and use a single line text input field instead. The single line input in "free text" modes just contains "<br>" : I would have had to use those in the text field anyway.       Re: Request: make $text available for "subst", posted by Sebastian Schenk on Tue Mar 23 13:42:27 2021  I am not Stefan, but maybe I can add to this issue. Personally I think it is not a good way to dump all the information into the text field and try to let the server parse it. This could be archived more simply by using e.g. the python elog scripts or using the elog command tool to directly submit well structured elog   Additional forbidden attributes, posted by Sebastian Schenk on Mon Jun 14 16:15:10 2021  Hello Stefan, I stubbled on a issue with our elog. We introduced an attribute "mode" to one of the elogs and it breaks the "Find" function as this attribute is already used for   Naming a Notebook KTAG Wipes Out Formatting. Why?, posted by Phil Rubin on Sat May 22 20:44:33 2021  An experiment's ELOG installation, using the default theme, names logbooks after its subsystem's acronyms.  One subsystem is referred to as KTAG, but when this name (or its lowercase version) is used for a logbook name, the logbook appears unformatted.  Changing the name, even to K-TAG, works fine.  Nothing close to KTAG appears in elog.css.  Does anyone know why this happens and whether it is possible or worth the while to get   New user not working, posted by Gabriel Lopez on Thu May 20 21:01:41 2021  Running elog-3.1.4-3 Can't add users through the web interface. Clicking add user and writing all the fields in with something doesn't add a user into the PWD file of that logbook. Running a tail -f on the password file shows elog writes the user info with the hashed password 3 times and then deletes the information about 20 seconds later. Has anyone else had a similar issue? This is running on RHEL8.3   Bug: "Append on edit" triggers too often, posted by Faith on Tue May 4 14:45:47 2021  The command "Append on edit = " is getting executed everytime, when a dropdown menu is changed. This happens even at the first creation of an entry, so the append text stucks up multiple times in the text body.       Re: Bug: "Append on edit" triggers too often, posted by Sebastian Schenk on Tue May 4 15:24:56 2021  I can confirm the issue also for "prepend on edit". To be more precise, it gets executed everytime the condition state changes, if placed in the config without condition, or if placed in a condition, everytime the condition gets activated.   Real-time mirroring?, posted by Frank Baptista on Mon Apr 26 15:40:36 2021  Hello! We have a number of local ELOG servers, all mirrored to a single "remote" ELOG server.  We have users that create updates at the       Re: Real-time mirroring?, posted by Sebastian Schenk on Mon Apr 26 16:41:50 2021  Hello Frank, It seems, you are using the mirror function of elog. It should resolve conflicts by itself acording to the documented rules. (https://elog.psi.ch/elog/config.html) As I don't use this function, I can't say how good it works.          Re: Real-time mirroring?, posted by Frank Baptista on Fri Apr 30 20:29:45 2021  Hi Sebatian, Thank you for taking the time to answer...very much appreciated!             Re: Real-time mirroring?, posted by Sebastian Schenk on Fri Apr 30 21:13:39 2021  Hi Frank, I am not sure, if I understood your setup correctly. But in my eyes, you don't need the local elog servers. The only difference for the users at the chambers would be to directly use the 'mirror' remote elog url instead of the local elog url in their browsers. "which                Re: Real-time mirroring?, posted by Frank Baptista on Fri Apr 30 21:55:23 2021  Hi Sebastian, You're absolutely correct that the users at the chambers could directly use the remote ELOG server (without having a local server), and I did originally think about this.  Unfortunately, there are times that our network "goes down" (for maintenance and other issues),   [Bug?] Admin restrict edit time, posted by Faith on Fri Apr 30 07:27:31 2021  I would like to know, if the command "Admin restrict edit time = " does really work as intended. In my case I have the following global configuration: Admin user = <me>   segfault in auth.c:366, posted by gary holman on Fri Apr 23 04:59:58 2021  Elog version:  ELOG V3.1.4-611489ba I am running openldap on the localhost.  For some reason now, elogd is segfaulting when (I believe) when a new user is being added to the password file.  For example:       Re: segfault in auth.c:366, posted by Sebastian Schenk on Fri Apr 23 15:46:39 2021  Hi Mr. Holman, The problem you are facing is more likely the issue, that the LDAP method is only provided as-is from a different developer. I had a similar issue with the LDAP of my university.          Re: segfault in auth.c:366, posted by Stefan Ritt on Fri Apr 23 16:21:05 2021  Well, if you find a solution with works for everybody, I'm happy to commit it to the main repository. But unfortunately I cannot test it because I don't have LDAP here, so I'm flying blind. Stefan             Re: segfault in auth.c:366, posted by Laurent Jean-Rigaud on Sun Apr 25 15:17:27 2021  Hi, Maybe it could be useful to add new parameters in elogd.cfg to define the attribute name to use to retrieve the given name, login name and email from LDAP server.          Re: segfault in auth.c:366, posted by gary holman on Wed Apr 28 04:01:49 2021  Dear Mr Ritt, Mr Schenk, Thank you for the responses.  This was indeed my issue and direction to fix the crash. Thank you,   How to make personal ELOG to public, posted by Hien Doan on Tue Mar 30 12:56:48 2021  Dear experts, I am trying to use ELOG for my projects which we want to record every daily activities.       Re: How to make personal ELOG to public, posted by Sebastian Schenk on Tue Mar 30 18:08:37 2021  Dear Hien, your problem is more general the question, how to get the elog to the network.          Re: How to make personal ELOG to public, posted by Hien Doan on Thu Apr 8 06:25:58 2021  Dear Sebastian, Thank you very much for the instruction.       Re: How to make personal ELOG to public, posted by Frank Baptista on Mon Apr 26 16:14:49 2021  Hello Hien, If you are sharing ELOG with users on the same network, here's something you can try.  First, on the machine running ELOG, you need to find the "Computer name".   To do this, locate "This PC", and right click it to get to "Properties" in   , posted by Vinzenz Bildstein on Fri Apr 23 18:53:16 2021      auto pre-fill fields issue, posted by Gys Wuyts on Fri Apr 9 16:48:54 2021  Hello, what are the pre-requisites to automatically fill the Author and Author Email fields. The documented method: Subst Author = $long_name from $remote_host       Re: auto pre-fill fields issue, posted by Stefan Ritt on Fri Apr 9 17:54:42 2021  You need user-level access control, using  Password file = ... Stefan          Re: auto pre-fill fields issue, posted by Gys Wuyts on Sat Apr 10 20:58:35 2021  Thank you but that is already  in place. I have the same issue on both Windows 10 and Windows Server 2016 and 2019. tnks g             Re: auto pre-fill fields issue, posted by Andreas Luedeke on Sun Apr 11 18:16:02 2021  If you would post a minimal config file where the problem occurs, then we could look what the problem is. Gys Wuyts wrote: Thank you but that is already  in place. I have the same issue                Re: auto pre-fill fields issue, posted by Gys Wuyts on Mon Apr 12 13:32:53 2021  [global] port = 8080 ssl = 0                   Re: auto pre-fill fields issue, posted by Stefan Ritt on Mon Apr 12 13:57:18 2021  "Subst xxx" replaces after you submit an entry, while "Preset xxx" replaces before you create an entry. I believe you want the second one. Stefan                      Re: auto pre-fill fields issue, posted by Gys Wuyts on Mon Apr 12 14:17:52 2021  Super, overlooked that one. Works now   g   Parsing log files, posted by Alan Grant on Fri Jan 8 05:48:45 2021  Sometimes we change the attributes in a config file for a given tab as time goes on, which naturally can get out of sync with the older data in that tab. I can imagine some other Elog users have encounterd this too at some point so I'm wondering if there's a utilty or some way       Re: Parsing log files, posted by John on Fri Jan 8 06:14:49 2021  Hi Al; if I understand your situation correctly you want to access Elog db (logbooks) via another way. There are many ways depending on your knowledge, type of work needed, and ease of use. I have found that accessing whatever I need via Elog gui is satisfactory in many situations-- by simply exporting. THEN take the raw csv/xml  file and manipulte it more easily from there. There are MANY free web sites that will take your data then, and put it in          Re: Parsing log files, posted by Alan Grant on Fri Jan 8 15:28:06 2021    John wrote: Hi Al; if I understand your situation correctly you want to access Elog db             Re: Parsing log files, posted by Stefan Ritt on Fri Jan 8 15:35:35 2021  Well, you could put the old options back to the config file, do the export, then remove them again. But have a look at the Elog database files ZZMMDDa.log in your logbook directory, they are pure ASCII files, which are relatively simple to parse. Hi       Re: Parsing log files, posted by Lagarde on Wed Apr 7 17:11:28 2021  Hi, I had similar needs (access and parse logs ) so I'm  a small library in cpp. Have a look on https://github.com/flagarde/elogpp maybe it could be usefull for you too.   Pre-fill Attribute with last entry, posted by Dominic Schneider on Wed Mar 24 16:20:37 2021  Hi all together, I struggle a lot with the following problem: I try to prefill certain attributes with the value of exactly the same attribute in the last entry made in the same logbook.       Re: Pre-fill Attribute with last entry, posted by Stefan Ritt on Wed Mar 24 16:25:36 2021  Nope, there is no way to acces the last value of an attribute. Sorry. Stefan Dominic          Re: Pre-fill Attribute with last entry, posted by Sebastian Schenk on Wed Mar 24 17:36:15 2021  Sorry Stefan, but it is possible as you have the scripting ability. The idea is to use "Preset Test_Attribute = $shell(script_to_get_the_last_entry)", where the script asks elog about the details and parses them.             Re: Pre-fill Attribute with last entry, posted by Dominic Schneider on Wed Mar 24 19:30:50 2021  Hi Stefan, hi Sebastian, thank you for your help. Ok I see its not that simple. Is there maybe a way of executing a Script on submitting, writing the values of the Attributes into an temporary file and loading the values                Re: Pre-fill Attribute with last entry, posted by Stefan Ritt on Wed Mar 24 19:45:41 2021  That would actually be my recommendation. There is a "execute new" which you can call when submitting a new entry. Stefan Dominic                   Re: Pre-fill Attribute with last entry, posted by Dominic Schneider on Thu Mar 25 07:48:24 2021  Thank you very much. So far I testet all functionalities and scripts to reach my goal. I will post a dummy of the solution later on for future purposes. Best wishes                       Re: Pre-fill Attribute with last entry, posted by Sebastian Schenk on Thu Mar 25 12:50:08 2021  I am glad, we could help. I can see a caveat in the recommendation. By having "Execute New = echo $attrib > /path/last_attrib" and "Preset attrib = $shell(cat /path/last_attrib)" as the most                         Re: Pre-fill Attribute with last entry, posted by Richard Stamper on Tue Mar 30 13:43:46 2021  Just noting that, depending on what you want to achieve, you may be able to use the threading functionality so that a "new" entry is actually a "reply" to a previous entry.  This will allow you to populate attributes with values from that previous entry without having to rely on storing information outside the system, with all the attendant concurrency risks already identified.   automatically obtain entry ID from search, posted by Chris Körner on Tue Mar 23 23:05:20 2021  Hi, in our application I want to have, let's say in the simplest case, two logbooks. One as a database of samples we fabricated and one as a logbook for measurements. When a measurement on a sample is done and an entry is submitted to the 2nd logbook, I want to automatically edit or reply to       Re: automatically obtain entry ID from search, posted by Stefan Ritt on Wed Mar 24 10:01:34 2021  You would have to do that on the scrip level. Use "curl" to search a logbook. Like following URL would search for all entries in this forum where you are the authoer, then return the entries in CSV format: https://elog.psi.ch/elogs/Forum/?mode=CSV1&Author=k%F6rner          Re: automatically obtain entry ID from search, posted by Sebastian Schenk on Wed Mar 24 18:02:07 2021  Hi Chris, Additional the the HTTP request sugested by Stefan you could also use the search functionality of the elog python module. For the HTTP request you may also need a way to provide credentials or transmit cookies, if the elog needs authentification.   Pre-fill , posted by Dominic Schneider on Wed Mar 24 16:11:04 2021  Hi all together, I struggle a lot with the following problem: I try to prefill certain attributes with the value of exactly the same attribute in the last entry made in the same logbook.   Date conversion, posted by Martin Neumann on Tue Feb 23 12:12:14 2021  Hi, I am trying to figure out how ELOG works and I have a problem. I have one datetime attribute, where I want the user to be able to enter the time in ISO8601 format (YYYY-MM-DD HH:MM) instead of the buttons.       Re: Date conversion, posted by Andreas Luedeke on Tue Feb 23 17:20:39 2021  If you define a field as "datetime" then you'll get the standard ELOG input field for datetime. It will be stored as seconds of the epoch (seconds since 1.1.1970). You can define a field as a default string input, then it is stored as a string. But you can convert that string by a shell scripts into seconds          Re: Date conversion, posted by Martin Neumann on Wed Feb 24 08:44:42 2021  I don't feel comfortable allowing the elog daemon to execute random shell scripts. Is there no other way? Andreas Luedeke wrote: If you define a field as "datetime" then you'll get             Re: Date conversion, posted by Sebastian Schenk on Tue Mar 2 15:17:56 2021  One other way would be to do the conversion on the client-side using javascript. Overwrite the complete datetime input cell and add an event listener to either onChange of this input or the submit event, to trigger the conversion before submitting, so elog would get the converted time.       Re: Date conversion, posted by Stefan Ritt on Wed Mar 10 17:30:23 2021  Do you actually need to convert the date into the internal format? Why not keeping simply the full string YYYY-MM-DD HH:MM. If the use is disciplined enough to always use the correct format, there should be no issue. I invented the datetime format to "force" all date/time inputs to have the correct format. If you have a proper YYYY-MM-DD HH:MM format, even sorting (now by string) should work correctly.   Last default time bug, posted by Sebastian Schenk on Mon Mar 1 16:02:02 2021  Hello all, I have the issue, that we can't list entries older than 1 year, if "Last default = 31" (or any other number, but they are restricted to 1, 3, 7, 31, 92, 182, 364) is active.   Path disclosure on unfound file, posted by Bruce Bush on Wed May 6 17:35:14 2015  Greetings,   Running elog 3.1.0 on CentOS 6.6.  When I try to access a nonexistent file, elog reveals a path in the 404 page.  For example: Not Found The requested file /usr/local/elog/themes/default/blortblortblort7854.htm       Re: Path disclosure on unfound file, posted by Stefan Ritt on Wed Jun 10 09:12:06 2015  What URL did you use? If I try here on this forum I get: which looks fine to me.          Re: Path disclosure on unfound file, posted by Travis Unkel on Fri Aug 18 01:02:41 2017  I am having the same issue. If you go to midas.psi.ch/elogs/12345.htm you get the path disclosure issue.   Stefan             Re: Path disclosure on unfound file, posted by prinnydood on Thu Dec 31 18:35:19 2020  I can confirm this issue exists on version 3.1.3, which I have installed elog on Debian 10. The issue also exists on version 3.14 (1.20190113git283534d97d5a.el7), which I tested on an AmazonLinux EC2 instance. This is what I found:                Re: Path disclosure on unfound file, posted by Stefan Ritt on Fri Jan 8 13:47:14 2021  Ok, I fixed the code in the current commit (395e101add19f0fe8a11a25d0822e511f34d94d1). The path gets stripped, and we see a prinnydood                   Re: Path disclosure on unfound file, posted by Gabriel Lopez on Wed Feb 3 17:28:16 2021  Hello, This is coming up as a high vulnerability in our scans. Are there plans to update the rpm for this fix? If so is there an ETA? Any update would be much appreciated. Currently running elog-3.1.4-2  Stefan                      Re: Path disclosure on unfound file, posted by Stefan Ritt on Fri Feb 19 09:59:04 2021  I made a new RPM: https://elog.psi.ch/elog/download/RPMS/elog-3.1.4-3.el7.x86_64.rpm Gabriel Lopez wrote: Hello, This is coming up as a high vulnerability in our scans. Are                         Re: Path disclosure on unfound file, posted by Gabriel Lopez on Fri Feb 19 19:48:11 2021  Thank you for your work. Works like a charm! Stefan Ritt wrote: I made a new RPM: https://elog.psi.ch/elog/download/RPMS/elog-3.1.4-3.el7.x86_64.rpm   export/archive a logbook, posted by Jacky Li on Thu Feb 18 19:21:57 2021  Hi, I have an elogd server serves many logbooks.  May I know what is a good way to export or achive one its logbooks?  Thank you. Jacky       Re: export/archive a logbook, posted by Stefan Ritt on Fri Feb 19 08:35:53 2021  Find -> Export to: CSV (or any other format) -> Search Jacky Li wrote: Hi,   elog server go to high CPU and hangs, posted by Stefano Lacaprara on Thu Feb 18 09:14:28 2021  Dear expert,   I'm running the latest git version of elog ELOG V3.1.4-395e101a on ubuntu 20.04.2. I'm experiencing frequent hangs of the elog server: the status is always reported as running, but the web server is not responding.       Re: elog server go to high CPU and hangs, posted by David Pilgram on Thu Feb 18 12:05:52 2021  Dear Stefano, Try the entry I wrote some time ago elog:68655       Re: elog server go to high CPU and hangs, posted by Stefan Ritt on Thu Feb 18 12:06:12 2021  Usually a restart of the elogd server helps. If the problem persists, one of the logbooks might be corrupt. Try to disable one logbook at a time to figure out which one it is. Then  remove that one and set it up freshly.   Different Top Groups or Groups have the same logbook name , posted by MATT TERRON on Tue Feb 2 04:01:21 2021  I have built different top groups for different departments. But occasionally these different top groups have the same logbook name, say 'Maintenance Log'. So is there a way I can have the same logbook name under different 'Top Groups', rather than rename these logbooks as 'Department1 Maintenance Log' all the way to 'Department_X Maintenance Log'?       Re: Different Top Groups or Groups have the same logbook name , posted by Stefan Ritt on Tue Feb 2 07:43:49 2021  Unfortunately you have to name these top groups differently, because they are internally used for the database name. MATT TERRON wrote: I have built different top groups for different departments. But occasionally          Re: Different Top Groups or Groups have the same logbook name , posted by MATT TERRON on Tue Feb 2 08:17:15 2021  So both Top Group names and Logbook names should be unique inside one .cfg file, is that correct? Stefan Ritt wrote: Unfortunately you have to name these top groups differently, because          Re: Different Top Groups or Groups have the same logbook name , posted by Stefan Ritt on Tue Feb 2 08:25:46 2021  That's correct. Stefan Ritt wrote: Unfortunately you have to name these top groups differently, because   elog slowness, posted by Giuseppe Cucinotta on Thu Jan 14 11:43:00 2021  We run elog on a server to provide a logbook for our laboratory. We noticed that elog is very slow on loading pages: browser pages spend a lot of time in charging (actually one can speed the procedure refreshing the page but it is quite annoying). I checked the server load with top and it doesn't show any abnormal CPU or memory usage. Then I ran lsof and I noticed that there are       Re: elog slowness, posted by Stefan Ritt on Thu Jan 14 14:05:19 2021  Have you tried to restart the elogd server? The CLOSE_WAIT could be dangling network connections, which were not properly closed by the browser. Giuseppe Cucinotta wrote: We run elog on a server to provide a logbook for our laboratory.   hidden files, posted by Lahreche Abdelmadjid on Sun Jan 10 11:13:31 2021  Hello; Could I make change on program only on the " elogd.cfg" ? Or is there onother files, because I think there is hidden files ?   outdated debian package, posted by Chris Körner on Fri Dec 18 18:08:54 2020  Hi everyone, I am currently trying to setup elog as a docker container. I wonder if there is any reason why the elog debian package is stuck at version 3.1.3? Would it be possible to update it to the latest version?    How to increase TEXT_SIZE to address entry text limit, posted by Illam Pakkirisamy on Thu Dec 3 19:11:38 2020  Hi, I'm trying to increase the entry text constraint but not sure how to do this.  Couldn't find it in the documentation or may be I missed it.  Appreciate your help.       Re: How to increase TEXT_SIZE to address entry text limit, posted by Simon Däster on Wed Dec 16 12:41:42 2020  Hi Illam You actually have to change the source code of elog and then recompile. Download the code from https://bitbucket.org/ritt/elog/src/master/, change the value of the variable TEXT_SIZE in the file src/elogd.h   Is there a way to upload a file in custom input?, posted by Satyajit Jena on Tue Dec 15 14:50:55 2020  Hi, I am trying to implement a Custom input forms by following this  https://elog.psi.ch/elogs/Contributions/49. Is there a way to also insert an image or files to it? I want to take a snap from the iPad and want that to go as an attachment or attach a file(s) into       Re: Is there a way to upload a file in custom input?, posted by Stefan Ritt on Tue Dec 15 15:19:25 2020  When you submit a "normal" elog entry, you can click on "Choose file" to add an attachment. On a mobile device, you will then be asked to select a photo from your library or take one with your camera. You can do the same on a custom form. You have to extract the code from the normal submissoin form and program it on your custom page. It needs however some work and might not be straight forward.          Re: Is there a way to upload a file in custom input?, posted by Satyajit Jena on Tue Dec 15 17:41:57 2020  Thanks Stefan, I am not yet able to figure out how attachment submission is done, I am trying. It would be helpful if you can refer me to some pointer. With regards,   length of condition names, posted by Harry Martin on Wed Dec 2 22:45:16 2020  The documentation describing the use of conditionals uses a single character (letter or number) for names of conditions.  I don't see any update/change to that rule anywhere in the docs. I have been using multi-character condition names successfully.   I find these are easier to use since they can be more descriptive       Re: length of condition names, posted by Stefan Ritt on Thu Dec 3 09:57:20 2020  You can easily use multi-character conditionals, up to 256 chars. Harry Martin wrote: The documentation describing the use of conditionals uses a single          Re: length of condition names, posted by Harry Martin on Fri Dec 4 02:03:56 2020  Could we update the doc for this? Stefan Ritt wrote: You can easily use multi-character conditionals, up to 256 chars.   Options <...> vs ROptions <...>, posted by Wolfgang Bayer on Thu Apr 28 11:20:40 2011  According to section "Syntax of elogd.cfg" of the "Administrator's Guide" Options <attribute> = <list> and   ROptions <attribute> = <list> should be the same. But there is a litle difference, because choosing an entry of the Options-pull-down menu causes a reload of the entry mask while choosing a ROption-radio-button the entry mask is not reloaded. This causes a problem using conditional attributes.       Re: Options <...> vs ROptions <...>, posted by Harry Martin on Thu Dec 3 01:51:49 2020  Same problem here, in version 3.1.3.   It would be very nice if this worked. Wolfgang Bayer wrote: According to section "Syntax of elogd.cfg" of the "Administrator's          Re: Options <...> vs ROptions <...>, posted by Stefan Ritt on Thu Dec 3 09:58:44 2020  For conditional attributes, you have to use Options, not ROptions. Maybe I will implement that one day, but only if I will have plenty of time... Harry Martin wrote: Same problem here, in version 3.1.3.   It would be very   Change / List Change doen't work anymore?, posted by Holger Mundhahs on Thu Sep 17 15:52:36 2009  Hello @all, I'm not sure if this is a bug, but after upgradeing from 2.7.0 to 2.7.7 the Change <attribute> and List Change <attribute> doesn't work anymore. In my       Re: Change / List Change doen't work anymore?, posted by Stefan Ritt on Thu Sep 17 18:32:59 2009  [quote="Holger Mundhahs"]Hello @all, I'm not sure if this is a bug, but after upgradeing from 2.7.0 to 2.7.7 the Change <attribute> and List Change <attribute> doesn't work anymore. In my          Re: Change / List Change doen't work anymore?, posted by Harry Martin on Tue Dec 1 02:12:14 2020  [quote="Stefan Ritt"][quote="Holger Mundhahs"]Hello @all, I'm not sure if this is a bug, but after upgradeing from 2.7.0 to 2.7.7 the Change <attribute> and List Change <attribute> doesn't work anymore. In my             Re: Change / List Change doen't work anymore?, posted by Harry Martin on Tue Dec 1 02:39:45 2020  [quote="Harry Martin"][quote="Stefan Ritt"][quote="Holger Mundhahs"]Hello @all, I'm not sure if this is a bug, but after upgradeing from 2.7.0 to 2.7.7 the Change <attribute> and List Change <attribute> doesn't work anymore. In my                Re: Change / List Change doen't work anymore?, posted by Andreas Luedeke on Tue Dec 1 22:57:25 2020  [quote="Harry Martin"][quote="Harry Martin"][quote="Stefan Ritt"][quote="Holger Mundhahs"]Hello @all, I'm not sure if this is a bug, but after upgradeing from 2.7.0 to 2.7.7 the Change <attribute> and List Change <attribute> doesn't work anymore. In my                   Re: Change / List Change doen't work anymore?, posted by Harry Martin on Wed Dec 2 00:43:31 2020  [quote="Andreas Luedeke"][quote="Harry Martin"][quote="Harry Martin"][quote="Stefan Ritt"][quote="Holger Mundhahs"]Hello @all, I'm not sure if this is a bug, but after upgradeing from 2.7.0 to 2.7.7 the Change <attribute> and List Change <attribute> doesn't work anymore. In my                      Re: Change / List Change doen't work anymore?, posted by Stefan Ritt on Wed Dec 2 11:51:24 2020  Yepp, the documentation was wrong. I fixed it. Stefan                         Re: Change / List Change doen't work anymore?, posted by Harry Martin on Thu Dec 3 01:53:59 2020  [quote="Stefan Ritt"]Yepp, the documentation was wrong. I fixed it. Stefan[/quote]   Duplicate entries, posted by Alan Grant on Thu Mar 16 15:15:34 2017  Periodically (rarely) on manually adding a record into Elog it generates a duplicate record with its own incremented ID and I don't know why. I just delete the duplicate in the meantime but would like to know if anyone else has seen this and whether their is a answer/fix for it. Thanks.       Re: Duplicate entries, posted by David Pilgram on Thu Mar 16 16:11:02 2017  I've seen exact;y this effect, even though I have branching = 0 in my config file - so ordinarily no chance to have two  replies to an entry.  My pointer aka mouse (I'm on Linux) is a bit dodgy, and sometimes disconnects/reconnects, so in effect gives a very fast double click.  I've always assumed that was the cause of the problem.  The two replies have incremental IDs, and both those IDs          Re: Duplicate entries, posted by Harry Martin on Wed Dec 2 04:07:57 2020  I find that I can reply to a message ("original" message, if you will) without doing anything to the reply message (the "copy" of the original message, if you will).  If I then submit it, it gets saved as a new message, identical to the one I replied to. I read through the options at the end of the docs.  I did not see anything about a way to suppress identical messages, or a way to force             Re: Duplicate entries, posted by David Pilgram on Wed Dec 2 15:57:25 2020  I'm not sure if this is what you want. If you want to prevent "accidental" replies being identical to the original message, you can force a situation where the user will be alerted that they have to do something if they really want to make a reply.                 Re: Duplicate entries, posted by Harry Martin on Wed Dec 2 17:54:51 2020  I was only commenting on the predicament as I have run into it also.  I have required fields, but short of some sort of "abort" control (curiously missing from the otherwise vast offerings of elog), I don't see any way to ensure that identical replies don't occur in any circumstance that may arise.                   Re: Duplicate entries, posted by David Pilgram on Wed Dec 2 18:22:37 2020  Hi Harry, I'm just an elog (ab)user, not one of the developers.  My original 2017 reply was to report an issue that was due to hardware, but somehow overcame a configuration flag (no multiple replies to a single entry), which might have been the same problem as the original poster, Alan Grant, was observing,                      Re: Duplicate entries, posted by Harry Martin on Wed Dec 2 22:13:52 2020    David Pilgram wrote: Hi Harry,   Placeholders in Python API, posted by Florian Feldbauer on Wed Nov 25 15:10:34 2020  Hey all, In the configuration of the Elog one can use Preset Author = $long_name   Style <attribute> and Cell Style <attribute> on the same row, posted by David Dunne on Tue Nov 17 12:10:07 2020  Query (FYI, OS = FreeBSD, Elog Version as showing on logon box = V3.1.4-) Is it possible to use both Style <attribute> and Cell Style <attribute> on the same row?   Create entry from command line - override Date?, posted by David Wallis on Tue Oct 27 16:00:03 2020  I'm converting our on-call logbook, with 25 years of history, to elog. Is there a way to override the current date/time for the Date field with the creation date/time of the original logbook entry?       Re: Create entry from command line - override Date?, posted by Stefan Ritt on Tue Oct 27 16:15:26 2020  You have to manually manipulate the logbook files YYMMDDa.log where you find the date at the top like: MID@$: 1 Date: Wed, 02 Sep 2020 15:38:09 +0300 <==== change here !!!!          Re: Create entry from command line - override Date?, posted by David Wallis on Tue Oct 27 16:37:07 2020  Hi Stefan, thanks! Does the Date field need to be the first field in each entry? I can see adding a "termpory" field called "Orig Date", upload the old entries, then edit the file(s), delete the Date field, and rename Orig Date to Date. Will that work? Stefan             Re: Create entry from command line - override Date?, posted by Stefan Ritt on Tue Oct 27 16:49:53 2020  "Date" must be on the first line on each entry and it must be named "Date". Stefan David             Re: Create entry from command line - override Date?, posted by Andreas Luedeke on Tue Oct 27 17:07:00 2020  You could transform your entries into the ELOG file format (either XML or CSV) and then use the import function. That would upload the correct dates from your entries. If you use the "Orig Date" trick you've proposed, you'll see that datetime fields are stored as seconds of the epoch (since                Re: Create entry from command line - override Date?, posted by David Wallis on Tue Oct 27 17:45:29 2020  Hi Andreas, Thanks for your input! After a little testing, it appears that if I make "Orig Date" the first field, it will fall under the Date field in the logbook file. I can then do a global delete of Date:, and replace Orig Date: with Date:, leaving it as the first field in the entry. Then I can                   Re: Create entry from command line - override Date?, posted by Andreas Luedeke on Tue Oct 27 21:59:03 2020  Hi David, correct. And in addition you will need to convert "Orig Date" from seconds-of-the-epoch into a properly formated date string (see example below from Stefan) ...                      Re: Create entry from command line - override Date?, posted by David Wallis on Tue Oct 27 22:24:18 2020  Hi Andreas, It was actually easier than that. The time stamps in the old system were in epoch format, so when I created the new record, (my conversion program was written in Python), I simply formatted that value in the format Stefan pointed out below, and defined the Orig Date field as text. Then I was able   MEG style elog configuration, posted by Daniel Kohl on Sun Oct 25 06:26:49 2020  Hello,   I'm new to elog software and I could not find a solution to my configuration issue. I would like to setup a configuration file similar to       Re: MEG style elog configuration, posted by Stefan Ritt on Mon Oct 26 11:42:53 2020  It was done using the "groups" feature: https://elog.psi.ch/elog/config.html#groups Stefan   Field values dependent on other selections, posted by Anthony Krishock on Tue Oct 20 02:34:46 2020  All, I would like to know if there is a way in elog to populate a field based on the value of another field. What I want to do is have a field with a few selections (a menu) and another text field that populates based on what I select from the menu.       Re: Field values dependent on other selections, posted by Stefan Ritt on Tue Oct 20 08:24:20 2020  Look in the manual under "conditional attributes" Stefan Anthony          Re: Field values dependent on other selections, posted by Anthony Krishock on Wed Oct 21 02:27:43 2020  Thanks for your suggestion. Right now, my log is configured as follows: Options Eyepiece = Pentax{a}, TeleVue{b}, Meade{c} {a} Options Pentax = 5mm, 20mm, 30mm             Re: Field values dependent on other selections, posted by Andreas Luedeke on Fri Oct 23 15:10:54 2020  Instead of using three different options you could use the same: Options Eyepiece = Pentax{a}, TeleVue{b}, Meade{c} {a} Options Form = 5mm, 20mm, 30mm   From command line: "command Submit not allowed", posted by David Wallis on Tue Oct 20 15:08:17 2020  I'm running  Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not  allowed.       Re: From command line: "command Submit not allowed", posted by David Wallis on Tue Oct 20 17:50:50 2020  Update: I tried switching the logbook to no authentication reqiured, and still get the "command Submit not allowed" response. David Wallis wrote: I'm running  Elog version V3.1.4-ba84827 on Red Hat          Re: From command line: "command Submit not allowed", posted by Stefan Ritt on Tue Oct 20 18:02:42 2020  "submit not allowed" you typically get if there is a "guest menu" for read-only access and you are not logged in. I never tried the elog program with PAM authentication, but you said that your turned authentication off. What I would do is to strip down your elogd.cfg to a very simple form until the elog utility works, then figure out which configuration makes the trouble.             Re: From command line: "command Submit not allowed", posted by David Wallis on Tue Oct 20 18:26:26 2020  Hmmm... I added "New" to the Guest menu list, and the button showed up for a guest user. But when I submitted the new ticket, I got the message Error: Command "Submit" is not allowed for user "" Stefan                Re: From command line: "command Submit not allowed", posted by Stefan Ritt on Tue Oct 20 18:40:05 2020  Giving up. Send me your config file and I will debug it. Stefan David                Re: From command line: "command Submit not allowed", posted by David Wallis on Tue Oct 20 20:44:03 2020  I've been able to work around this by completely turning off authentication, and adding New to the Guest menu list. One additional question: since I'm uploading historical logbook entries, is it possible to set the entry creation date via the command line? It seems that elogd is overriding the attribute "Date".                   Re: From command line: "command Submit not allowed", posted by David Dunne on Wed Oct 21 03:08:21 2020  FYI, I had problems a few weeks ago trying to get the command line elog working, blamed everybody and everything but myself. In my case it was command line syntax errors and eventually got it going as part of a nightly script While testing I ran the Elog Server from the command line in verbose mode to see if that helped determine the problem.                      Re: From command line: "command Submit not allowed", posted by David Wallis on Wed Oct 21 15:14:13 2020  Hi David, thanks for your input! This logbook has been around for almost 10 years, and has evolved from file-based authentication, to LDAP, and finally to PAM (that can use any of local password files, LDAP, and Active Directory), and I'm thinking that might be the root of this problem. There are old account entries from the   Upload attachment with py_elog, posted by Bruno Schuler on Tue Oct 20 16:05:40 2020  Hello, How can one add an attachment to a new or existing entry with py_elog? E.g. if I want to upload an image.   Up-to-date windows-version, posted by Sergei Gavrilov on Sun Oct 18 16:59:38 2020  Dear colleagues, Can someone compile an up-to-date windows-version or write a manual how to do it in Windows without compiling errors? Thank you.   Is it possible to visually group attributes with border, posted by Daniel Sajdyk on Thu Oct 8 12:29:55 2020  Hello, I'm working on new logbook and in one category I'll have many attributes (many more than in attached screenshot). So here is my question. Is it possible to visually group such attributes with some border, or something like that?       Re: Is it possible to visually group attributes with border, posted by Stefan Ritt on Thu Oct 8 12:40:52 2020  Nope, this is not possible. Sorry. Stefan Daniel   moving eLog to another computer, posted by Ekaterina Korobkina on Wed Sep 30 18:57:44 2020  Our Unix server died, so we decided to move our old eLog to the new server, running Mac OSX. Elog version is earlier then 2013, I can not say I read that on OSX  eLog must be intalled through "make" command if I need to install eLog first, how to add all old information later?       Re: moving eLog to another computer, posted by Andreas Luedeke on Sat Oct 3 11:08:27 2020  you need to copy your logbooks into the "logbooks" directory. you need to copy your elog.cfg logbook config file to the new elog folder and reference it at start-up (something like "elogd -c /usr/local/elog/elogd.cfg ...") Some people modify other stuff (CSS, java scripts) but if you had you would know what you did.   Loose of Data, posted by Lahreche Abdelmadjid on Sun Sep 27 16:03:48 2020  Hi, Since few days I Notice that I've some data who disappear from ELOG (software). I find them on ELog/Logbooks, but can't view them in the application ELOG !       Re: Loose of Data, posted by Lahreche Abdelmadjid on Sun Sep 27 16:10:06 2020  Oh! I can view all data but only from the PC where ELOG is Installed ! From the other PC data missed. Lahreche          Re: Loose of Data, posted by Lahreche Abdelmadjid on Sun Sep 27 16:40:16 2020  The solution is in the reindex  Lahreche Abdelmadjid wrote: Oh! I can view all data but only from the PC where ELOG is Installed   Bug report. "Submit" button misbehave, posted by Andrey on Tue Sep 22 18:54:04 2020  Hi.  I am an IT guy of the AMS collaboration at CERN. We have been using your wonderful elog software for about 10 years now. Thanks! It served us so well that I guess we never got in touch with you.        SOLVED, posted by Andrey on Wed Sep 23 11:51:57 2020  Hi again. We have solved our problem!  It was caused by a non-defined mod_auth_openidc configuration parameter: # Interval in seconds after which the session will be invalidated when no interaction has occurred.   Query to get values for Attributes, posted by Florian Feldbauer on Mon Sep 21 09:17:52 2020  Hey, I'm trying to integrate the Elog into our SlowControl System (Phoebus/EPICS). As a first step I translated the python library to Java. So writing new Entries and viewing them works.       Re: Query to get values for Attributes, posted by Andreas Luedeke on Mon Sep 21 20:03:49 2020  That would be a nice feature... If you are good in parsing HTML you can achieve this feature: when you create a new entry "<elog-URL>?cmd=new", you'll get HTML source code that provides you with all possible attribute choices.          Re: Query to get values for Attributes, posted by Florian Feldbauer on Tue Sep 22 09:27:45 2020  Thanks for the tipp. I managed to use XPATH to get the values for my Type and Category attributes! The API, I'm developing for Phoebus is quiet simple. It currently just supports Author, Subject, Type and Category as attributes and the latter two are just lists of values.   view connecting account, posted by Lahreche Abdelmadjid on Sun Sep 13 09:13:31 2020  Hi All, Can I view who is connected to ELOG (I'm the Admin) ? thank you.       Re: view connecting account, posted by Andreas Luedeke on Mon Sep 14 17:25:08 2020  Yes, you can see that in the logging file, if you turn on logging. You might want to read the manual https://elog.psi.ch/elog/config.html. Here's the relevant excerpt:          Re: view connecting account, posted by Lahreche Abdelmadjid on Tue Sep 15 12:31:09 2020  Thank you, I found it. Andreas Luedeke wrote: Yes, you can see that in the logging file, if you turn on logging.   testing the client: unclear it worked, posted by Jose Caballero on Thu Jul 30 17:03:12 2020  Hello, I just gave it a quick try to the command line client, to see if I can use it to access our institution service.        Re: testing the client: unclear it worked, posted by Stefan Ritt on Fri Jul 31 08:34:35 2020  The <hostname> you have to actually replace with your real host name. Same for logbook, username and password.  On my local test system I get (actual password hidden here with "...") ~$ elog -h localhost -p 8080 -l demo -u stefan ... -a Authort=SR -a Subject=test           Re: testing the client: unclear it worked, posted by Jose Caballero on Mon Sep 14 15:40:02 2020  Sorry for the late reply. I didn't get email notification about an answer to my question :) Actually, I just wrote <hostname> and so on for privacy. In my attempt, they have real values.  And yet, I got as result: "Message successfully   Insert images slow downs the ELOG, posted by Zbigniew Reszela on Wed Sep 9 11:41:23 2020  Dear all, First, many thanks for creating and sharing this great tool which is ELOG! Our users are very happy with it! I have few questions about inserting images into the entries.       Re: Insert images slow downs the ELOG, posted by Andreas Luedeke on Sat Sep 12 19:19:02 2020  I found the most limiting factor of ELOG to be the file access. ELOG stores all entries in files and therefore has a lot of disk access. We found that an AFS directory for ELOG is unusable. We tried to store our logbooks on NFS, and it was barely usable but slow. Now we use a local disk on the server, that works fine.   field selections persist across new log entries?, posted by Anthony Krishock on Tue Sep 8 14:22:11 2020  All,   I am using elog as an observation log for amateur astronomy. I have a form configured, but I would like to know if it is possible to       Re: field selections persist across new log entries?, posted by Sebastian Schenk on Tue Sep 8 16:35:14 2020  As far as I know, it is not possible, if you make a "new" entry. You could configure the elog, to always PRESET an atribute, but then it is always the same, not the last. I think the "duplicate" entry function could provide you partly with the functionality you want, as it copies all old values into a       Re: field selections persist across new log entries?, posted by Andreas Luedeke on Wed Sep 9 10:33:58 2020  It is probably possible, but requires a big of a hack. Whenever you save a new entry or edit an old one, you run a little shell script to write the value of this field into a file. Whenever you create a new entry you read the PRESET value with a shell script from that file. Here are the relevant excepts from the documentation:   Using curl to post new entries, posted by Florian Feldbauer on Wed Sep 2 10:24:58 2020  Hey, i'm trying to use curl to post new entries to our logbook as described here: https://elog.psi.ch/elogs/Forum/68597. The Elog is installed via the Deban package on Buster.       Re: Using curl to post new entries, posted by Florian Feldbauer on Wed Sep 2 11:56:04 2020  After going through the code of the Python API (https://github.com/paulscherrerinstitute/py_elog/blob/master/elog/logbook.py) I tried the following: $ python3 >>> from passlib.hash import sha256_crypt          Re: Using curl to post new entries, posted by Stefan Ritt on Wed Sep 2 15:42:40 2020  This is correct. The elogd daemon needs username and password in parameters "unm" and "upwd". The password must be SHA256 encoded, so best is to grab it from the password file. This way one does not have to send clear text passwords over the network. Florian   How to prevent file path leaks on a 404 page, posted by Rich Loring on Tue May 12 15:53:17 2020  Hello, We used the Elog RPM binary installation method to install Elog. Our security scanners are complaining that Elog discloses the version information when you hit a missing page (404 error).  How can I hide this version info? Is there a snippet of code somewhere that I can comment out?       Re: How to prevent file path leaks on a 404 page, posted by Stefan Ritt on Tue Aug 4 13:44:01 2020  I removed the version info from the 404 error, but you have to recompile elogd from sources. The fix will be included in the next RPM, but that can usually take a few weeks. Rich          Re: How to prevent file path leaks on a 404 page, posted by Stefan Ritt on Wed Aug 26 20:44:38 2020  A new RPM has been released at https://elog.psi.ch/elog/download/RPMS/elog-3.1.4-2.el7.x86_64.rpm containing that fix. Stefan Ritt wrote: I removed the version info from the 404 error, but you have to recompile   SSL does not work, posted by Hisataka YOSHIDA on Fri Jun 5 03:49:20 2020  Hello. I installed the latest elog (3.1.4-2) in CentOS 7, and it is working well without SSL. When I enalbled SSL option (SSL = 1) in the "elogd.cfg", and tried to start the elogd, the message below was shown and failed to run.       Re: SSL does not work, posted by Stefan Ritt on Fri Jun 5 13:24:01 2020  When you compile elog from the soruces, you need the OpenSSL library to be installed. The CMake build process will then find it and include it in the compile process. When you use the "make" build process, you have to make sure that SSL is enabled there: USE_SSL = 1          Re: SSL does not work, posted by Hisataka YOSHIDA on Thu Jun 11 08:23:01 2020  Dear Stefan, Thank you for your comment. I successfuly compiled the latest elog from source code, and now elogd could work with SSL. In fact, I reported the case of installation with rpm file. Maybe, the latest elog rpm doesn't support SSL, I guess.             Re: SSL does not work, posted by Stefan Ritt on Wed Aug 26 20:41:50 2020  Today I succeeded with the help of L.JR to produce a new RPM which contains SSL, KRB5, PAM and LDAP support. It's uploaded to https://elog.psi.ch/elog/download/RPMS/elog-3.1.4-2.el7.x86_64.rpm Hisataka YOSHIDA wrote: Dear Stefan,   do some changes on .CFG, posted by Lahreche Abdelmadjid on Mon Aug 17 10:34:32 2020  Hi All, I would like to have "Permis de verouillage et d'étiquetage 016685-68AF-0031" when I select it. I don't found where can I make this change       Re: do some changes on .CFG, posted by Andreas Luedeke on Mon Aug 17 13:27:09 2020  This has nothing to do with the ELOG package, but only with your local configuration of that specific logbook. You should contact your local ELOG administrator. Or you might want to rephrase you question: do you want to have this text added in the text field when selecting the field specifier?          Re: do some changes on .CFG, posted by Lahreche Abdelmadjid on Tue Aug 18 11:28:58 2020  Thanks, but I'm the Admin of local ELOG. usually I can make a lot of changes on my files .CFG But this time no way. when I select one of the choice i've a text who appear with the right text (code), but only with this choice "Permis de verouillage             Re: do some changes on .CFG, posted by Andreas Luedeke on Wed Aug 19 15:22:58 2020  How are we supposed to give you a hint when you don't post your configuration? Lahreche Abdelmadjid wrote: Thanks, but I'm the Admin of local ELOG.   Reverse sort by Attribue, but it's only showing the last 6 entries by default., posted by Anthony on Sun Aug 9 03:41:05 2020  Hi, I'm trying to use the Sort Attributes option to sort all entries by a user specified date.  The issue I'm running into, is that       Re: Reverse sort by Attribue, but it's only showing the last 6 entries by default., posted by Andreas Luedeke on Sun Aug 9 20:47:05 2020  It is described in the manual at https://elog.psi.ch/elog/config.html#general Entries per page = <number> Funnily the default is "20". I have no idea why you see 6 entries.          Re: Reverse sort by Attribue, but it's only showing the last 6 entries by default., posted by Anthony on Mon Aug 10 09:01:24 2020  Thank you, Andreas!  Not sure why I kept overlooking it in the manual.  As for the number of entries when I sort, I'm not sure.  I'll set it up to display a larger number and see what happens. Andreas   SSL connection drop with large content, posted by HyonSan Seo on Mon Aug 10 07:56:43 2020  Dear all,   I had some difficulty to upload large files (>20MB) with SSL connection. I think it is also related to https://elog.psi.ch/elogs/Forum/68636       Re: SSL connection drop with large content, posted by Stefan Ritt on Mon Aug 10 08:33:42 2020  Your solution sounds quite good, I will incorporate them in the distribution. Stefan HyonSan   Record ID corruption, posted by Frank Baptista on Sun May 3 15:58:24 2020  Hi all, I've encountered an occasional problem that seems to be exacerbated by having a message with many replies. In our use of ELOG, we run lengthy environmental tests (often several days) in multiple temperature chambers (one logbook for each chamber).        Re: Record ID corruption, posted by David Pilgram on Sun May 3 18:05:32 2020  Hi, I've had problems in the past due to a dodgy pointer creating branches despite a "No branches" in the configuration file.  It would be very interesting to see what the 200428a.log file looks like with these entries: in the screenshot they appear to be shown in time order, but          Re: Record ID corruption, posted by Frank Baptista on Sun May 3 22:43:12 2020  Hi David, Thanks for the quick response!  Well, I'd have to say that the sequence is as tangled as it looks in the logbook -- I've attached a copy of the log file for your reading pleasure.              Re: Record ID corruption, posted by David Pilgram on Mon May 4 14:55:53 2020  Hi Frank, There are two interesting points about the log file.  1.  Entry 5658 is timestamped later than 5659, but is earlier in the entry list.  It also is "In Reply to" 5659. despite                Re: Record ID corruption, posted by Frank Baptista on Fri May 22 21:03:05 2020  Hi David, Well, you've made some very interesting observations, and raised some excellent questions.  So, I went back and did some homework, reviewing a number of logbooks to find instances where this strange 'record twist' occurs.  You had asked, "Do you have enough information to decided                   Re: Record ID corruption, posted by David Pilgram on Sat May 23 16:15:38 2020  Hi Frank, Good bit of detective work.  To me it suggests that something as yet undetermined occurs, that, when the 57th reply happens, causes the issue.  If that "something" hasn't happened, all is well.  Apart from Heinz varieties (not true, in fact), 57 isn't an obvious                      Re: Record ID corruption, posted by Stefan Ritt on Tue Aug 4 13:38:05 2020  I tried to reproduce the problem with a fresh minimal logbook (the demo one coming from the distribution). Made 60 replies and all went well. So I wonder if it has to do with some special settings in elogd.cfg. Can you reproduce the problem with an empty logbook and an edlog.cfg which contains just the minimal settings?   Search feature in ELOG, posted by Illam Pakkirisamy on Sun Aug 2 18:45:18 2020  Hi, Is there a search feature in ELOG.  Basically, we have the topics broken up by categories but within the categories we would like to search by a key word based on the subject to get to a specific topic.       Re: Search feature in ELOG, posted by Andreas Luedeke on Mon Aug 3 13:25:50 2020  That question screams: please read the manual! Find command: https://elog.psi.ch/elog/userguide.html#browse Some simple examples: https://elog.psi.ch/elogs/Forum/?mode=threaded&reverse=0&reverse=1&npp=20&Subject=Search https://elog.psi.ch/elogs/Forum/?mode=summary&reverse=0&reverse=1&npp=8&Subject=category Illam Pakkirisamy   Missing log files when rsync to replacement server., posted by VUIIS SysAdmin on Thu Jul 30 17:11:05 2020  I am moving from a Hyper-V host to a VMware host and created a new elog server. I installed the elog software and did an rsync to get the .cfg file and logbooks to the new server. rsync -av root@old.elog.server:/usr/local/elog /usr/local/       Re: Missing log files when rsync to replacement server., posted by Stefan Ritt on Fri Jul 31 15:42:55 2020  Start your new server interactively with "elogd -v 3" to see all verbose output. You will then see how it indexes all logbooks. If not, you might have a wrong path in elogd.cfg VUIIS          Re: Missing log files when rsync to replacement server., posted by VUIIS SysAdmin on Fri Jul 31 21:40:02 2020  On the new server in the logbook that should have several 2020 entries it stops on the last entry of 2019. On the old server after stopping elogd i get: /usr/sbin/elogd -v 3             Re: Missing log files when rsync to replacement server., posted by Stefan Ritt on Sat Aug 1 15:13:17 2020  You can put your files where ever you want, just tell elogd where to find the elogd.cfg file via the "-c" flag. Then tell elogd where to find files in the elogd.cfg file via the "Logbook dir" and "Resource dir" directives. Stefan                Re: Missing log files when rsync to replacement server., posted by VUIIS SysAdmin on Sun Aug 2 02:57:59 2020  Thank-you. That is good information to have.  What is the default if you you do not specify anything in elogd.cfg? I assume it is  /usr/local/elog otherwise it would not see the existing logbooks.                   Re: Missing log files when rsync to replacement server., posted by Stefan Ritt on Sun Aug 2 09:06:46 2020  If nothing is specified elogd looks for logbooks in the current directory where it got started under ./logbooks/ No idea what happened to your 2020 logbook. VUIIS   Expanding column width when viewing in Summary mode, posted by Illam Pakkirisamy on Thu Jul 16 23:29:15 2020  Hi, I'm trying to expand the Subject column, when viewing in summary mode, and couldn't find any documentation for it.  Is this possible and if so, how would I do it.       Re: Expanding column width when viewing in Summary mode, posted by Stefan Ritt on Fri Jul 17 09:18:18 2020  You can't directly change individual columns, but you can reduce the "Text" column. This is done in themes/default/elog.css. Search for "listtitle2" and change or remove the line "width:100%". This makes the text column narrower, leaving more space for the subject column. Illam          Re: Expanding column width when viewing in Summary mode, posted by Illam Pakkirisamy on Sat Jul 18 17:19:31 2020  Hi Stefan, Thanks for your prompt follow up.  I did try commenting of the width statement for listtitle2 and also reducing it to 40% but it did not work.  I restarted elogd daemon and I don't see the columns changing.  I also tried putting a percentage number (40%) for listtitle1 just             Re: Expanding column width when viewing in Summary mode, posted by David Pilgram on Sun Jul 19 13:14:36 2020  Anyone who knows me knows I (ab)use elog a lot.   And this one is another of a long list of cheats and work arounds rather than modifying the code properly. In summary mode, the top row are titles, and if they are long, they will dominate the width of that column.  Similarly if they are short,             Re: Expanding column width when viewing in Summary mode, posted by Stefan Ritt on Mon Jul 20 08:37:17 2020  I can think of two reasons why you don't see a change: 1) You modified the wrong file. The elog.css file is under elog/themes/default/elog.css. If you "install" elog, it might go into your installation directory. So check if you have more than one file with this name.                Re: Expanding column width when viewing in Summary mode, posted by Illam Pakkirisamy on Thu Jul 23 21:19:24 2020  Hi Stefan, I have only one elog.css file in the default directory and the installation path is the same one that I'm using. Basically, I'm using off of the installed path.  I also tried, modifying the file and calling it elog_mod.css and then specified CSS=<path>/elog_mod.css and started   How to change name of record Id from $@MID@$., posted by John on Wed Jul 22 18:11:56 2020  Hi Everyone, I tried using this $@MID@$ in JS as a variable and cannot doit. I researched a little and found no answer on special character usage. If anyone knows, please lemme know. I also tried breifly in Elogd to change it to something like just MID, but need a better editor as  (Kate) is not saving       Re: How to change name of record Id from $@MID@$., posted by Stefan Ritt on Wed Jul 22 19:10:08 2020  No idea what you are talking about. $@MID@$ is used in the database files to indicate the start of a new message. It is not used on any elog web page. If you want to put the message ID on your web page, you should use the variable "$message id" as written in the documentation. You say JS, where is your JS running? You wrote a JS program to work on the raw elog database files? Or you wrote an extension to run in your browse? You have to be a bit   Expanding column width when viewing in Summary mode, posted by Illam Pakkirisamy on Thu Jul 16 23:26:43 2020  Hi, I'm trying to expand the Subject column, when viewing in summary mode, and couldn't find any documentation for it.  Is this possible and if so, how would I do it.   bug in elog.spec, posted by Janusz Szuba on Mon Jul 6 19:09:48 2020  Hi,  in commit 1812e7c, specifying CFLAGS to make command in elog.spec, renders all other settings in Makefile void. That is, if I want to include any of KRB5, LDAP, PAM support, and change makefile accordingly,       Re: bug in elog.spec, posted by Laurent Jean-Rigaud on Mon Jul 6 20:19:21 2020  Hi, You rights, CFLAGS should not be in specfile to take care of distrib env. Btw, I sent in the past an update for build process of Stefan delivery to generate src.rpm file copatible to tarball version. I think Stefan          Re: bug in elog.spec, posted by Janusz Szuba on Tue Jul 7 11:22:45 2020  Thanks for the answer, I will try with your specfile best Janusz   change Cell Style, posted by Lahreche Abdelmadjid on Tue Jun 30 11:39:12 2020  Hi All, I hope to change the Cell Style backround color into background point. because my color printer don't work.       Re: change Cell Style, posted by Andreas Luedeke on Tue Jun 30 17:12:10 2020  You should edit the CSS style file: /usr/local/elog/themes/default/elog.css Just change all fields "background-color:" to your desired color; e.g. "#FFFFFF" for white.   Lahreche Abdelmadjid          Re: change Cell Style, posted by Lahreche Abdelmadjid on Wed Jul 1 09:08:17 2020  I would like to change the backround cilor of a cell and not sheet. also don't use color, but system of point (to print it in monochome printer) Andreas   Update, posted by Lahreche Abdelmadjid on Tue Jun 30 13:42:13 2020  Hi,   How to do the last update with out losing any data ?       Re: Update, posted by Andreas Luedeke on Tue Jun 30 17:15:18 2020  When you update from a version 2.* to a version 3.* then all elog entry files will be moved in subfolder for each year. But non of the entries are lost. Only if you afterwards try to start an old version 2.* with the newly converted data directories, then the old version will not find any of the entries. I've updated the ELOG version many times now. The only data I once lost was a modified CSS style file and a "hand   change Cell Style, posted by Lahreche Abdelmadjid on Tue Jun 30 11:21:11 2020  Hi All, I hope to change the Cell Style backround color into background point. because my color printer don't work.   email notification for self register 2 3 and 4, posted by pierre brionnet on Mon Jun 8 07:30:06 2020  Hi, I have set up my elog for testing and setup postfix to be able to send email notification for register of new user but whatever i try elog cannot set email. I try to sent test email in my bash and this is working without problem to my gmail account.       Re: email notification for self register 2 3 and 4, posted by Stefan Ritt on Mon Jun 8 08:11:33 2020  Why don't you start elogd interactively with the "-v" flag (verbose) and watch the communication between elog and postfix. Maybe you see a specific error there. Stefan          Re: email notification for self register 2 3 and 4, posted by pierre brionnet on Mon Jun 8 08:29:16 2020  Hi Stefan, I did run in verbose mode but only got this output with the 587 SMTP port from gmail Email from <ELog@localhost.localdomain> to XXXX@gmail.com, SMTP host smtp.gmail.com: 220 smtp.gmail.com ESMTP n1sm6153685pfd.156 - gsmtp             Re: email notification for self register 2 3 and 4, posted by Stefan Ritt on Mon Jun 8 09:12:27 2020  STARTTLS is not supported natively by elog. You have to disable this in your SMTP server. Stefan pierre   How to prevent file path leaks on a 404 page, posted by Rich Loring on Tue May 12 15:47:33 2020  Hello, We used the Elog RPM binary installation method to install Elog. Our security scanners are complaining that Elog discloses the version information when you hit a missing page (404 error).  How can I hide this version info? Is there a snippet of code somewhere that I can comment out?   CSS for HTML Mails, posted by Daniel Pfuhl on Wed Jan 22 16:10:51 2020  Hi there, we extensively use Logbuch as a change documentation platform. E-Mail notifications for new entries are very important for us.       Re: CSS for HTML Mails, posted by Stefan Ritt on Wed Jan 22 16:35:47 2020  The CSS has been embedded in the email end of 2018, so just upgrade your server. https://bitbucket.org/ritt/elog/commits/5165daf35cc1fb066071827719079fe0c9aa5ffb /Stefan          Re: CSS for HTML Mails, posted by Daniel Pfuhl on Wed Jan 22 17:32:39 2020  Hmm, I'm pretty sure that we are on the latest version already. We use ELOG V3.1.4-a04faf9f I downloaded a fresh install binary for Windows and compared the checksums:             Re: CSS for HTML Mails, posted by Stefan Ritt on Wed Jan 22 19:30:41 2020  a04faf9f is pretty old: https://bitbucket.org/ritt/elog/commits/a04faf9fa9ca74657240cdc827bd2d0ae48a9df1 It's from September 2018, where the change with the CSS has been made on Decemb er 2018. You have to pull the current version from the git repository and recompile the program yourself.                Re: CSS for HTML Mails, posted by Daniel Pfuhl on Tue Apr 21 09:13:45 2020  Hi Stefan, I pulled the code from the repository but was not able to build it. Sorry, I'm not a developer. Is there a good documentation you can recommend on how to do this for a Windows installation incl. how to setup   very long subject cause buffer overflow, posted by Stefano Lacaprara on Tue Apr 14 13:26:50 2020  Hi,   I'm using elog 313 on an ubuntu server.        Re: very long subject cause buffer overflow, posted by Stefano Lacaprara on Thu Apr 16 10:07:18 2020  Additional information: I tried to recompile with -g (debug) and run it in gdb but the crash is not reproduced that way (w/ or w/o gdb). I guess that the memory handling in debug mode is different so the corruption is not  there anymore.          Re: very long subject cause buffer overflow, posted by Stefan Ritt on Thu Apr 16 10:11:13 2020  Can you try to reproduce it on this (!) server? I cannot reproduce it on my home copy server, so I guess that might be fixed in meantime. Can you update to the current version of elog?             Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate v  My try on this server ->> see the subject                Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate v  indeed, I'll try to move to ELOG V3.1.4-80633ba > My try on this server ->> see the subject                   Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate v  > indeed, I'll try to move to ELOG V3.1.4-80633ba >  > > My try on this server ->> see the subject                   ... subject erased ..., posted by Stefan Ritt on Thu Apr 16 11:03:03 2020  I found two potential memory leaks which I fixed in the git version, so you can try again. Another possibility, which is actually preferred, is to limit the size of the subject filed to a reasonable number. You can do that with following option                      ... subject erased ..., posted by Stefano Lacaprara on Thu Apr 16 11:12:32 2020  > I found two potential memory leaks which I fixed in the git version, so you can try again. Just tested, and it works! Many thanks for very quick patch!   Mirroring function for a full both-sides synchronization, posted by Sergei Gavrilov on Mon Feb 24 15:58:55 2020  Hello, dear ELOG's gurus. Please help me to understand a problem with mirroring function. It appears in ELOG V3.1.4-a04faf9f - the last official Windows release, as well as previous 3.1.3 Windows release, which I have checked for       Re: Mirroring function for a full both-sides synchronization, posted by Stefan Ritt on Thu Apr 2 13:37:21 2020  The entry ID #0 was a bug in logging routine only, so in the elog logbook the ID is certainly not zero. But the logging bug has been fixed now, so please update your version of elog. Then I tried to reproduce your problem. I set up two servers, the master listening at port 8080 and the slave listening at port 8081. I created   How to add bulk client list at once, posted by Sunilkumar on Sun Mar 29 13:30:09 2020  Please let me know how to add Button for adding client next to Client Mnemonics.   I need to add bulk client lists in the Elog page there are 1000+ clients  .       Re: How to add bulk client list at once, posted by Stefan Ritt on Wed Apr 1 15:16:43 2020  Options are limited to 200. To add options dynamically, use  Extendable options = <name> as desribed in the manual.          Re: How to add bulk client list at once, posted by Sunilkumar on Wed Apr 1 19:27:53 2020  Hi Stefan  Thanks for Response , It helped me lot . is it possible to give refence to include 1000 clients in one file and adding that referece file to Roptions ?             Re: How to add bulk client list at once, posted by Stefan Ritt on Wed Apr 1 20:01:26 2020  No, that's not possible with elog. Sunilkumar wrote: Hi Stefan    email notification fail to retrieve images in the text , posted by MATT TERRON on Wed Apr 1 12:29:47 2020  When I use the email notification for an entry with images in the text, it seems the email server cannot retrieve the image. When I inspected the URL of the image it went to the login page. Is that because the logbook has a password config that the access from the URL of the image needs authentication?    Or       Re: email notification fail to retrieve images in the text , posted by Stefan Ritt on Wed Apr 1 13:01:39 2020  First thing you want to try is to upgrade elog to the last version. Older versions have problems in including images. Then you want to check the "Email Format" in your elogd.cfg configuration file. Only if "16" is included there, then attachments are sent as email attachments and images will be included in yoru email. If not, only a link of the image is included in your email, and you correctly   How does attributes substitution work?, posted by Gianluca Rigoletti on Fri Mar 20 14:07:59 2020  Hello, Let's say I have a logboook where I define two attributes: [TOTEM]       Re: How does attributes substitution work?, posted by Stefan Ritt on Fri Mar 20 14:24:28 2020  There could be a bug which is triggered by the fact that $M is a substring of $min. Try to rename $M to $Month or so. Stefan Gianluca   How to update date fields so 'alarms' work correctly., posted by John on Sat Feb 29 06:04:57 2020  Hi Stefan! In the user manual under misc it says this: "The elog program makes it possible to submit logbook entries automatically by the system or from scripts. In some shift logbooks this feature is used to enter alarm messages automatically into the logbook.       Re: How to update date fields so 'alarms' work correctly., posted by Sebastian Schenk on Fri Mar 13 16:38:53 2020  Dear John, I am a user of the elog system and no developer, so no complete answer guaranteed. The quote of the manual describes the case, if e.g. an hardware component discovers a failure and the connected PC makes an automatic (new) entry          Re: How to update date fields so 'alarms' work correctly., posted by John on Fri Mar 13 18:34:30 2020  Hi Sebastian! Thank you soo much for your kind response. You are correct in all of your assumptions as to what I want to do (or not do!). Everything should be on clients side, and I want the date to be updated in each record, daily, or hourly, in order to allow the 'alarm' system I created to be able   ELOG reverts to demo configuration, posted by VUIIS SysAdmin on Thu Feb 20 16:54:32 2020  I have been using elog for over 10 years. Suddenly my elog installation has changed (probably from a recent update. My /etc/elogd.cfg has changed to the original demo configuration. Even after changing it to my configuration from backup none of the entries for the logbooks apper even though the tabs for the logboos are ther all logbooks are empty. I have looced at the logbook files and the entries seem to be there but are not showing on the web interface.       Re: ELOG reverts to demo configuration, posted by Andreas Luedeke on Fri Feb 21 19:11:12 2020  If you've upgraded from an elog 2.x version to an 3.x version, then all entries of a logbook will be moved into subfolder, one for each year. If you then switch back to the 2.x version of elog, it'll not find any entries. You can move them back to the folder for the logbook (one directory up) and they'll be found again after the next restart of elog.   Elogd crashes on search, posted by Laurent Jean-Rigaud on Fri Jan 31 15:17:04 2020  OS: CentOS 7 x86_64 up2date with RPM 3.14 x86_64 Connexion to ELOG open one logbook and click search, input "test" and click "Search" : BOOM Firefox can not connect anymore on ELOG. The crash is met with several words now ("test", "post", "4.5", are the       Re: Elogd crashes on search, posted by Stefan Ritt on Fri Jan 31 15:27:21 2020  Do you see the same problem on this server here? If not, then it must be related to your specific configuration. You have to teach me how to reporduce the error in order to fix it. Best would be a minimal elogd.cfg which causes the error.          Re: Elogd crashes on search, posted by Laurent Jean-Rigaud on Fri Jan 31 15:34:56 2020  Hi Stefan, The problem seems to be specific with our logbooks. Maybe one of the file is corrupted or bad string encoding ?! But how to find the source of the problem ?             Re: Elogd crashes on search, posted by Stefan Ritt on Fri Jan 31 15:46:09 2020  The only way for me is to reproduce it. Could be corrupted data file, or config file. Try with a new logbook with the same configuration, then add logbook files one by one until it happens. Stefan                Re: Elogd crashes on search, posted by Laurent Jean-Rigaud on Mon Feb 3 13:31:15 2020  Hi Stefan. I installed debuginfo and ran elogd with gdb attached. (gdb) backtrace                    Re: Elogd crashes on search, posted by Laurent Jean-Rigaud on Tue Feb 4 13:56:51 2020  Hi Stefan, My previous dump is useless as your elog-debuginfo rpm is stripped. So i rebuild elog w/ -g , reinstall it and activate core generation. I restst a search of "test" and get this in gdb corefile .                      Re: Elogd crashes on search, posted by Laurent Jean-Rigaud on Tue Feb 4 17:07:02 2020  At #5, there is message_id=426 . You think it's this elog entries # 426 that is the source of crash  ?   Laurent Jean-Rigaud wrote: Hi Stefan,                         Re: Elogd crashes on search, posted by Stefan Ritt on Tue Feb 4 17:19:49 2020  Looks like. Can you dig into the database file and have a look at that entry? Or send me the file containing that entry (together with your elogd.cfg) Stefan Laurent                            Re: Elogd crashes on search, posted by Laurent Jean-Rigaud on Tue Feb 4 18:33:56 2020  Stefan, I cut the log in two parts w/o modifying the content and the search runs. It seems that the size of this entrie 426 is closed to a limit (as during testing, i met a message after clicking save to recompile elog to increase a size of something), so it could be the problem.                               Re: Elogd crashes on search, posted by Stefan Ritt on Tue Feb 11 12:12:49 2020  Thanks for the detailed investiations and report. Finally I could reproduce the problem by having messages with a text body size close to 250000 bytes (some internal limit). Never thought that someone really has the patience to write 250'000 chars in a single message, but I guess you did some copy/paste from a large file. Thought in such cases people use attachments. Nevertheless, I fixed an internal memory allocation problem, now it shoudl be fine to                                  Re: Elogd crashes on search, posted by Laurent Jean-Rigaud on Fri Feb 21 14:42:25 2020  Thanks to you, Stefan ! You software is very usefull for us and it's nice to have support. Have a nice day !   Find cannot find values with brackets, posted by Sebastian Schenk on Fri Jun 14 11:29:30 2019  For demonstration, I created https://elog.psi.ch/elogs/Linux+Demo/8 The Find search for category aaa(bb) does not give results. A quick filter corrects the value to aaa\(bb) and delivers results.       Re: Find cannot find values with brackets, posted by Stefan Ritt on Fri Jun 14 12:43:04 2019  I‘m happy to merge the PR after a quick test next week. Stefan Sebastian   ELOG Null Pointer Dereference Denial-of-Service Vulnerability, posted by Stefan Ritt on Wed Feb 12 13:19:31 2020  An ELOG vulnerability has been reported, thanks to Asif Akbar of Trend Micro Security Researchworking with Trend Micro's Zero Day Initiative: https://www.zerodayinitiative.com/advisories/ZDI-20-252/ The issue has been fixed in the current release 3.1.4-033e292 and in the RPM http://elog.psi.ch/elog/download/RPMS/elog-latest.x86_64.rpm   Running ELOG as daemon in Windows not working, posted by Duarte Alexandre Vicente Pais on Fri Jan 31 18:22:50 2020  Hi, I tried to set up an ELOG from a windows machine. Its functionalities work without any problem, but I cannot access at all this ELOG from any other machine. I tried to search in this forum, but with no avail. Could someone perhaps tell me know how to fix this problem? Or did I miss something obvious in the configuration of the ELOG?       Re: Running ELOG as daemon in Windows not working, posted by Stefan Ritt on Fri Jan 31 18:50:09 2020  Probably a problem with your Windows Firewall. You have to convice your OS to let you in. Stefan Duarte          Re: Running ELOG as daemon in Windows not working, posted by Duarte Alexandre Vicente Pais on Fri Jan 31 19:26:51 2020  Do you know which settings in the firewall panel I should change (windows 10 machine)? I went over all the access rules and could not find anything corresponding to the ELOG. Duarte             Re: Running ELOG as daemon in Windows not working, posted by Stefan Ritt on Fri Jan 31 19:34:26 2020  I'm not a Windows user so I don't know details. But I believe you have to make an exception in the firwall for the elogd.exe executable. You can certainly Google how to do that for any executable. Stefan   PAM authentication question, posted by David Wallis on Tue Nov 5 21:42:50 2019  I'm testing the PAM authentication feature, and have a couple questions, a suggestion, and a comment. First the comment... it was pretty easy to get working, and is exactly what we need here, so thanks! Our PAM stack here is designed to allow logins with Active Directory, LDAP, or local accounts, so the PAM option preserves all of that.       Re: PAM authentication question, posted by Jan Christoph Terasa on Sun Nov 17 14:55:11 2019  David Wallis wrote: I'm testing the PAM authentication feature, and have a couple questions, a suggestion, and a comment.          Re: PAM authentication question, posted by David Wallis on Thu Nov 21 18:10:28 2019  Hi Christoph, Thanks for looking into this, if you can enable PAM + File, our users would be very happy! The pam.d issue is probably related to CentOS/Red Hat, since our PAM expert warned me that it might be necessary.             Re: PAM authentication question, posted by Jan Christoph Terasa on Thu Dec 19 17:46:33 2019  Hi David, sorry for the delay, I currently am very busy with other important work-related business, I hope I can find some time to look into this during christmas holiday season.             Re: PAM authentication question, posted by Laurent Jean-Rigaud on Fri Jan 24 17:33:14 2020  Hi, First, thanks to ELOG tool !                  Re: PAM authentication question, posted by Jan Christoph Terasa on Fri Jan 24 18:13:03 2020  Hi Laurent, does the ELOG server show the window immediately before even showing the login mask?                     Re: PAM authentication question, posted by Laurent Jean-Rigaud on Fri Jan 24 18:22:52 2020  Hi, Before le pam module link, yes. After adding it, I wait some seconds before new login window popups with password error message.                      Re: PAM authentication question, posted by Laurent Jean-Rigaud on Fri Jan 31 15:39:17 2020  FYI i added ACL on /etc/shadow file to allow elog user for reading. Testing from elog login shell is OK. Any suggestion ?     local usage on windows + Linux virtual machine , posted by Sara Vanini on Fri Jan 24 14:56:56 2020  Hello again,  I love to use elog, but I don't need any other accessing it for the moment. So, it is possible to run elog locally on my PC, and make it not accessible from outside?        Re: local usage on windows + Linux virtual machine , posted by John on Fri Jan 24 21:04:51 2020  Elog does not access the outside world by default. With the VM I suppose just access it via the Linux local ip address (and port).   Sara Vanini wrote: Hello again,           Re: local usage on windows + Linux virtual machine , posted by Sara Vanini on Mon Jan 27 08:46:39 2020  Thanks John. I found the linux IP address with ifconfig, type it on my windows machine with the port number, but it doesn't work, the error is "website not found"... what else could I try? Regards   HTML editor tools grayed out, posted by Ehab Fanous on Wed Jan 22 19:35:36 2020  After we upgarde to eLog 3.1.4 ... The HTML editor tools are grayed out and you can't paste any images in the body of the log like I did below.. Any help will be much appreciated..       Re: HTML editor tools grayed out, posted by Stefan Ritt on Wed Jan 22 20:02:09 2020  This typically happens if you update only the executabe and not the full directory tree with the ELOG JavaScript files. /Stefan Ehab          Re: HTML editor tools grayed out, posted by Ehab Fanous on Thu Jan 23 14:28:28 2020  Thank yoy for responding back to me ... I run the excutable that I downloaded from the website .. How can I do the full directory tree with the ELOG JavaScript files?? Stefan          Re: HTML editor tools grayed out, posted by Ehab Fanous on Fri Jan 24 21:50:37 2020  We just tested eLog and it works in Chrome but not in IE .. Is it a setting issue that we need to chnage on IE ?! Stefan Ritt wrote: This typically happens if you update only the executabe and not the   editor hangs intermittently, posted by Sara Vanini on Fri Jan 24 14:56:04 2020  Hello, I'm using ELOG with Ubuntu 19. When I create or edit an entry and I start writing, it hangs for few seconds, resumes, and all over again intermittently.   Different behaviours to identical configuration of logbooks for email notification, posted by matthieu heller on Mon Jan 20 13:46:56 2020  Dear, I need to setup automatic email notification using direct send through a office365 smtp server.   text wrapping broken in firefox, posted by Devin Bougie on Thu Dec 19 16:28:06 2019  When creating new logbook entries, recent versions of firefox somehow ignore the message width setting. For example, configure a logbook with:       Re: text wrapping broken in firefox, posted by Devin Bougie on Thu Dec 19 16:40:10 2019  As an example, I created this same entry in the demo logbook using Safari.  As you can see there, the message is wrapped at the width that I set the text entry box.   Change column width in list mode?, posted by David Wallis on Mon Dec 2 23:28:28 2019  In some of our logbooks, some columns are very narrow, which makes their content difficult to read. I have tried adding a custom css file like this: listframe td:nth-child(3) {    width: 250px;       Re: Change column width in list mode?, posted by Stefan Ritt on Wed Dec 4 10:37:32 2019  You need .listframe td:nth-child(3) {    min-width: 250px;          Re: Change column width in list mode?, posted by David Wallis on Fri Dec 6 15:40:19 2019  Awesome, thank you! Stefan Ritt wrote: You need   How to selectively use Top/Bottom Text JavaScript., posted by John on Wed Dec 4 03:06:50 2019  I think I know what the answer(s) will be already.. that I will need to address this in JS. I don't want each screen to run/show the same code, other than the ones I want to.  AND I do not want to have to create a custom form for each 'menu option' to achieve this (if possible). Thanx,       Re: How to selectively use Top/Bottom Text JavaScript., posted by Stefan Ritt on Wed Dec 4 10:15:56 2019  In JS, you have access to the browser URL via window.location. So you can write conditional code depending on the actual elog command. Stefan John          Re: How to selectively use Top/Bottom Text JavaScript., posted by John on Wed Dec 4 20:39:41 2019  Wow thanks again Stefan for your kind and prompt responses!! John Stefan   Executing a shell command using elogd Windows service, posted by Frank Baptista on Sun Nov 24 20:29:24 2019  Greetings! We've been successfully running nearly a dozen separate logbooks on independent laptops -- all of them are running elogd as a Windows service. This works well, since I've also set up auto recovery options in the event that the       Re: Executing a shell command using elogd Windows service, posted by Frank Baptista on Sun Nov 24 21:10:28 2019  Sorry -- I somehow selected the wrong OS in my original message. Asleep at the wheel again. Frank Baptista wrote: Greetings!          Re: Executing a shell command using elogd Windows service, posted by Stefan Ritt on Mon Nov 25 16:32:07 2019  Wow, having these color signal lamps really looke like a cute solution, made me laugh. No, there is no other way than the Execute new thing. I have given up long time ago to use Windows services, because they are very hard to debug and very limited. So at our site everything runs under Linux.             Re: Executing a shell command using elogd Windows service, posted by Frank Baptista on Sat Nov 30 15:46:16 2019  Well, there I was, eating Thanksgiving dinner, when suddenly, it hit me (no, not indigestion).  I can write a simple program that parses out the latest "Status" from the most recent logbook file -- a relatively easy task, since it's a text file.  This solution avoids having to execute a shell command at all.  GOOOOOOAAAAAAL!!!    Trouble on Catalina, posted by John S. Haggerty on Fri Nov 22 02:55:50 2019  I decided to rebuild elog 3.1.4 in Catalina (MacOS 10.15.1), XCode 11.2.1.  As in previous builds, I needed to add to the Makefile pointers to openssl: CFLAGS += -I/usr/local/opt/openssl/include LIBS += -L/usr/local/opt/openssl/lib       Re: Trouble on Catalina, posted by Stefan Ritt on Mon Nov 25 16:25:21 2019  The Makefile is kind of obsolete, I switched to CMake. So the Makefiel is mostly there as backup. To compile elog, do elog$ mkdir build; cd build elog/build$ cmake ..   Example scripts how to migrate or combine logbooks, posted by Roger Kalt on Mon Nov 18 16:58:21 2019  Attached the shell scripts using awk and sed how I have migrated two separated logbooks into one single and how I re-adjusted certain attributes.   Subdirectories in logbooks, posted by pavel on Sat Nov 9 22:44:23 2019  Hello, Is there any way to organize logbooks in some kind of tree with sublogbooks or just have a subdirectories in a logbook directory on the filesystem (treat it as a sublogbook if its name is different from 4 digits of year and pin above all the entries in a list) to structure entires a bit?         Re: Subdirectories in logbooks, posted by Stefan Ritt on Mon Nov 11 13:09:35 2019  Just use groups as written in the manual: https://elog.psi.ch/elog/config.html#groups Stefan pavel   Hide logbook tab when not authorized, posted by Stefano Bonaldo on Tue Aug 22 18:29:02 2017  Hello, I read carefully the manual, but I didn't find a way to hide the logbooks in the logbook bar and in the initial logbook selection for which the user does not have the access. So, if a user1 does not have the access to a specific logbook, user1 is not able to see that logbook in the bar and neither in the initial logbook selection. How can I do this without using the top groups?       Re: Hide logbook tab when not authorized, posted by Andreas Luedeke on Wed Aug 23 11:36:22 2017  Hi Stefano, I think your assessment is correct: it is not possible to hide a logbook based on your read/write privileges. And I'm not even sure that this would make much sense: at least you need to be able to get to the login page of the logbook. But if you don't have          Re: Hide logbook tab when not authorized, posted by Stefano Bonaldo on Wed Aug 23 20:09:39 2017  Hi Andreas, many thanks for your answer. I partially agree with you, because sometimes "for privacy" of my working group I don't want that other users (external users) know the existance of the other logbooks.             Re: Hide logbook tab when not authorized, posted by Andreas Luedeke on Thu Aug 24 11:08:43 2017  Well, Stefan would need to answer that. But if you are good with C-programming, you might implement it yourself? There is a way to implement it; but it makes your installation a lot more complicated: you can have two ELOG servers. The first has all logbooks but requires authentification to read any. The second has only the public logbooks, and they are mirrored from the first.                Re: Hide logbook tab when not authorized, posted by Stefan Ritt on Thu Aug 24 11:46:30 2017  Hi Stefano, that's what top groups were made for. So make a top group for yourself, and nobody will be able to see them without having the proper URL. Hiding logbooks from the logbook selection page is not possible since when people bring up that page, they are not yet logged in, so elog does not know                   Re: Hide logbook tab when not authorized, posted by marijn lucas on Thu Oct 24 16:38:27 2019  *** edit *** I solved my problem by removing the guest options from the logbooks ('Guest menu commands' and 'Guest List Menu commands'), this forbids any unauthorised user to see the content of the concerned logbooks. This is what I needed.   Edit of multiple posts, posted by Finn Junker on Fri Oct 11 14:16:58 2019  Hello Elog Forum There is i ELOG the function to edit multiple posts eg. to change the staus from "ongoing" to "finished" -> in danish translation "igangværende" and "afsluttet", see the attached pictures.       Re: Edit of multiple posts, posted by Andreas Luedeke on Tue Oct 15 10:37:29 2019  I use editing of multiple entries frequently and it works fine for me. To understand your problem I would suggest that you try a minimal configuration. If you have a test logbook with just one or two fields and it still does not work, then post the config here that people can reproduce your problem - and hopefully find a fix.          Re: Edit of multiple posts, posted by Finn Junker on Thu Oct 17 14:57:25 2019  Hello Andreas OK, I did install a version of ELOG with a minimum of settings and the edit of multiple settings works fine. I've tracked the issue to "Locked Attributes = Bruger".             Re: Edit of multiple posts, posted by Andreas Luedeke on Fri Oct 18 08:50:27 2019  Hi Finn, I don't know if this was intended, but at least I know a possible solution: with the command "Show Attributes Edit = " you can limit the attribute list shown in the edit form to those that are not                Re: Edit of multiple posts, posted by Finn Junker on Fri Oct 18 09:40:54 2019  Hello Andreas Show Attributes Edit = xxx, limits the attributes shown when editing but when you submit you get the error Error: Attribute Bruger not supplied.                   Re: Edit of multiple posts, posted by Andreas Luedeke on Fri Oct 18 23:22:50 2019  I'm sorry, apparently my tip was not clear: you should use "Show Attributes Edit = " to NOT SHOW any of your locked attributes. It is just a guess: if the attribute is not shown in your edit form, it will not complain about it when you submit the form. Did you try that? Cheers, Andreas   Finn                      Re: Edit of multiple posts, posted by Finn Junker on Mon Oct 21 10:46:43 2019  Hello Andres Or maybe my reply was unclear :-), but i did use the "Show Attributes Edit" the way you meant to not show attribute BRUGER and when i do that i get:                         Re: Edit of multiple posts, posted by Finn Junker on Tue Oct 22 12:47:06 2019  Trial and error - it seems like this combination does the trick: Locked Attributes = Author Fixed Attributes Edit = Author   How to get Elog server to produce web server log files in Linux., posted by John on Wed Oct 16 09:45:41 2019  Hi, I have been trying for a long time to get my web server logs to record when someone accesses my Elog server. I've tried Apache2, Lighttpd, and others, all with no luck. Either the web servers complain that the port I have Elog on is in use, or I just don't get any readings. I need to see who is accessing my  Elog from the web, and I hope there is a way.       Re: How to get Elog server to produce web server log files in Linux., posted by Stefan Ritt on Wed Oct 16 09:48:56 2019  Have you tried Logfile = ... Logging level = 3          Re: How to get Elog server to produce web server log files in Linux., posted by John on Wed Oct 16 10:19:42 2019  Thanx soo much Stefan.. I feel so stupid for not looking at the admin guide more :( But you how us nerds are-- read the manul last! John :) Stefan          Re: How to get Elog server to produce web server log files in Linux., posted by John on Thu Oct 17 21:29:25 2019  Hi again everyone; a Sebastian suggested I use a reverse proxy to complete my need to have logs show up when someone 'lands' on my first entry page. I see that Elog will only start recording logs when someone has actually started to do some work.. like login, read a post, etc... but NOT when they first enter the login page or 'listings' pages. I have tried fowarding from my router (both lighty and Apache) but so for no good. I will also             Re: How to get Elog server to produce web server log files in Linux., posted by Sebastian Schenk on Mon Oct 21 13:41:08 2019  Hi, that Sebastian would be me. I replied to the first entry, as it was a draft (site reloaded incorretly...) and now I can't see the post anywhere. But this is off topic.                Re: How to get Elog server to produce web server log files in Linux., posted by John on Mon Oct 21 19:31:17 2019  Thank you soo much Sebastian once again for helping me!! This is something that will help me very much in the future with other situations similiar! John :) Sebastian   elog hanged when uploading photo failed, posted by Xuan Wu on Wed Feb 27 02:34:46 2019  Hi all,   We came across a problem recently when clicking "Upload" button, then elog hanged and never being accessed. I have checked the elog logs and find that it seems that elog didn't get the path of the picture for some reason. So is it a bug or our operation isn't correct?       Re: elog hanged when uploading photo failed, posted by Stefan Ritt on Tue Mar 5 20:48:51 2019  The problem is you have some weird characters in your file name R2BLM15 ? ? ? ? ? .PNG which confuses the interpreter. There should not be any special character or blanks in attached images. Stefan          Re: elog hanged when uploading photo failed, posted by Xuan Wu on Wed Mar 6 05:10:28 2019  That make sense. Is there a way to recovery when hung except restart elogd? On the other hand, whether could  prompt for reloading attachment when interpreter detect error but not hang? Wu Xuan          Re: elog hanged when uploading photo failed, posted by Xuan Wu on Wed Oct 16 13:20:31 2019  Hi all, I've found a bug in elog. It's all right that uploading an image which file name with special characters. I think it must have something to do with the code like"url_encode(file_enc, sizeof(file_enc));  /* for file names with special characters like "+" */".   ELOG Stop working with kerberos configuration , posted by Moustafa Messed on Wed Oct 16 11:06:34 2019  Dear All  i have this problem since i tried  to install ELOG latest version while make Authetnetication Kerberos ELOG stop runing any idea or help please   Author name in reply to entry is from original poster, posted by Max on Thu Oct 10 11:50:06 2019  My elog has this config for the author: Option Author = Filled In Automatically Preset Author = $Long_name       Re: Author name in reply to entry is from original poster, posted by Stefano Lacaprara on Thu Oct 10 11:58:14 2019  This should do the trick Preset on reply Author = $long_name Best, Stefano          Re: Author name in reply to entry is from original poster, posted by Max on Thu Oct 10 12:01:10 2019  Brilliant in all its simplicity! Many thanks! Stefano Lacaprara wrote: This should do the trick       Re: Author name in reply to entry is from original poster, posted by Stefan Ritt on Thu Oct 10 12:41:09 2019  Preset on reply Author = $long_name Max wrote: My elog has this config for the author:   Email boolean , posted by Finn Junker on Tue Oct 8 12:00:58 2019  Hello Elog forum Is it possible to email boolean statements, like if a checkbox is checked to email certain people?       Re: Email boolean , posted by Finn Junker on Tue Oct 8 15:34:39 2019  > Hello Elog forum >  > Is it possible to email boolean statements, like if a checkbox is checked to email certain people?          Re: Email boolean , posted by Andreas Luedeke on Wed Oct 9 12:39:45 2019  > > Hello Elog forum > >  > > Is it possible to email boolean statements, like if a checkbox is checked to email certain people?             Re: Email boolean , posted by Finn Junker on Thu Oct 10 09:27:42 2019  > > > Hello Elog forum > > >  > > > Is it possible to email boolean statements, like if a checkbox is checked to email certain people?   How to export and import all the threat from old elog server to the new elog server , posted by stalin on Tue Sep 24 20:06:26 2019  Hi Team, Can you please guide me how to export and import the documents from the one elog to the another elog server also I like to know how to backup the server.       Re: How to export and import all the threat from old elog server to the new elog server , posted by Andreas Luedeke on Wed Oct 9 12:09:19 2019  See https://elog.psi.ch/elog/config.html#mirroring and https://elog.psi.ch/elog/userguide.html#access   Cannot connect to server of Gmail SMTP, posted by Kevin Wang on Sun Oct 6 20:25:27 2019  Hi all, When I tried to set SMTP server of Gmail in the global configuration file, I get the message "Error sending Email via <i>"smtp.gmail.com"</i>: Cannot connect to server" after I tried to receive the Email notification. Is there anyone gives help to solve this issue?       Re: Cannot connect to server of Gmail SMTP, posted by Stefan Ritt on Mon Oct 7 08:54:32 2019  Gmail uses a type of SMTP authentication which is currently not supported by elog. It's however on the todo list. Stefan Kevin          Re: Cannot connect to server of Gmail SMTP, posted by Kevin Wang on Tue Oct 8 05:42:56 2019  Hi Stefan,   Thank you very much for your reply. So which SMTP type can I use now? Is outlook OK?             Re: Cannot connect to server of Gmail SMTP, posted by John on Tue Oct 8 06:47:27 2019  This is a local issue  on your network, if you have a mail server setup. SMTP is not handled directly by Elog and neither is any other mail protocal. Elog just sends the requested email to your server for processing to the recipients afaict. And whatever server (or service) you use to handle email sending needs to be able to accept them from your mail server. So after verifying which ones  you want to use; (like OutLook, or gmail, or whatever), then   Custom input forms implementation, posted by Stefan Ritt on Fri Sep 17 06:19:39 2010  Dear ELOG users, starting with SVN revision 2328, custom input forms are implemented. This allows application specific formats for check lists etc. In our specific case we had to implement a shift check list, which was quite long. Furthermore the check list should be optimized for an iPad, which we take in the field       Re: Custom input forms implementation, posted by JD on Fri Jul 8 12:09:45 2016  Hello Stefan, I created a custom form with the example you provided. When I enter the Data and Submit the Form I get the error message "Datei passwordfile.xml kann nicht geöffnet werden: No such file or directory".  Posting stuff works in all   Cannot submit due to authentification errors, posted by Informatica Unidad SSBB AEMET VALENCIA on Fri Aug 16 13:24:26 2019  Hi everyone. We are new in ELOG. We have installed it and created new logbooks following the "demo" one. We have configured our SMTP host, with email and pass, but we obtain this error when submit       Re: Cannot submit due to authentification errors, posted by Andreas Luedeke on Sat Aug 17 22:23:34 2019  If you post the [global] part of your configuration, it would help a little bit to understand the problem. Cheers, Andreas Informatica          Re: Cannot submit due to authentification errors, posted by Informatica Unidad SSBB AEMET VALENCIA on Mon Aug 19 14:09:22 2019  I try with gmail account and neither it works. I'm using Windows 10 and it runs into a proxy defined as URL               Re: Cannot submit due to authentification errors, posted by Stefan Ritt on Tue Aug 20 11:06:47 2019  Elog supports only a limited set of authentications for SMTP. Both GMail and probably also your server requires more advanced authentication schemes, which are not suppoerted by elog. Sorry. Stefan                Re: Cannot submit due to authentification errors, posted by Informatica Unidad SSBB AEMET VALENCIA on Tue Aug 20 22:41:10 2019  Me podrías decir algún servidor SMTP de correo desde el que si funcione? Muchas gracias Stefan                   Re: Cannot submit due to authentification errors, posted by Informatica Unidad SSBB AEMET VALENCIA on Wed Aug 21 09:21:54 2019  Sorry, Could you please tell us a MAIL SMTP SERVER we can use to try? Many thanks                      Re: Cannot submit due to authentification errors, posted by Andreas Luedeke on Wed Aug 28 17:59:17 2019  Sorry, but I would think that this is a question for the IT department of your institute, not for the ELOG forum. Since you have an institute email address (infoval@aemet.es NOT xxx@gmail.com), you certainly have your own mail server, or am I wrong? Cheers, Andreas   Drag and drop does not work in 3.1.3?, posted by Lech on Tue Aug 20 09:47:06 2019  Hello, I can paste images into text (which resulted in the text_size too long error message), however, I can't drop them on my elog. However, I can do it on the demo version. Was the drag and drop into text already supported in version 3.1.3 and I am just missing some configuration option, or do       Re: Drag and drop does not work in 3.1.3?, posted by Stefan Ritt on Tue Aug 20 10:34:37 2019  The Drag & Drop was implemented already in 3.0.0 (see https://elog.psi.ch/elog/download/ChangeLog). So no idea why it's not working for you. Stefan          Re: Drag and drop does not work in 3.1.3?, posted by Lech on Tue Aug 20 11:37:03 2019  Can I find the config of the demo elog somewhere, so I could try it locally? Stefan Ritt wrote: The Drag & Drop was implemented already in 3.0.0 (see https://elog.psi.ch/elog/download/ChangeLog).             Re: Drag and drop does not work in 3.1.3?, posted by Stefan Ritt on Tue Aug 20 11:45:14 2019  It's the config from the distribution. A copy is below. Stefan [global]                Re: Drag and drop does not work in 3.1.3?, posted by Lech on Tue Aug 20 13:28:53 2019  Thank you. Locally doesn't work for some reason... I'll try to investigate. Btw. do you plan to properly accept pasting of images? Pasting a screenshot saves a lot of time when making logs. Stefan                   Re: Drag and drop does not work in 3.1.3?, posted by Andreas Luedeke on Tue Aug 20 17:03:57 2019  > Btw. do you plan to properly accept pasting of images? I would claim it is already properly supported. If you hit a size limit you can configure your ELOG to adjust the limit (Max content length).                      Re: Drag and drop does not work in 3.1.3?, posted by Lech on Wed Aug 21 02:21:57 2019  From what I've read in a past post, it is hitting the max content length because pasting, unlike dropping, is not properly supported and it is possible that images get converted to text in some way and occupy a lot of "content length". So what I mean is that the pasted image is handled the same way as the dropped image.                         Re: Drag and drop does not work in 3.1.3?, posted by Lech on Wed Aug 21 07:00:17 2019  I've discovered, that if I switch my local elog to SSL, dropping of images starts to work (as expected). However... pasting stops. If I select "paste" popup, I got the message about my browser security settings not allowing to paste, and that I can paste in the popup window. In Firefox I can actually paste in the popup window (image appears there), but after clicking OK nothing appears in the editing window. In Chrome and Opera nothing appears even   Unable to add entries with command line elog.exe with SSL, posted by Antonio Bulgheroni on Fri Jun 28 17:00:10 2019  Dear all,  we have a running elog installation using SSL (with the self-signed certificate). Generally we use the web interface, but we have been asked if it was possible to automatically insert elog entries via command line.        Re: Unable to add entries with command line elog.exe with SSL, posted by Antonio Bulgheroni on Mon Aug 12 13:11:54 2019  Any news for my problem?  Your help is very much appreaciated!  thanks :)          Re: Unable to add entries with command line elog.exe with SSL, posted by Andreas Luedeke on Wed Aug 14 13:25:15 2019  I am using SSL with ELOG and it works fine with the "elog" executable. I am no expert on SSL, but I can provide my two cent what you could try, maybe it helps: SSL desires to run on the port 443 - I have no idea if you can force it to run on an arbitrary port, it might be possible. But does it             Re: Unable to add entries with command line elog.exe with SSL, posted by Antonio Bulgheroni on Wed Aug 14 18:36:17 2019  Dear Andreas, thanks for your message. Here are the answers to your questions.                Re: Unable to add entries with command line elog.exe with SSL, posted by Antonio Bulgheroni on Thu Aug 15 19:00:12 2019  So as promised, I add some more information.  Unfortunately changing the port where the server is listening did not make any change. The situation is still the same. If I try directly from the server, I get a warning about the fake certificate and if I do it from elsewhere, I get the error that the server is not running SSL.    restrict edit time, posted by Sebastian Schenk on Mon Jul 15 17:35:48 2019  Hello, I have experienced some inconveniences with the restrict edit time option. First, it is not possible for admin users to edit an entry after the edit time.       Re: restrict edit time, posted by Andreas Luedeke on Thu Aug 15 13:34:23 2019  Yes, I agree that cleaning up old Draft entries and correcting/deleting old entries is a job for the administrator. Currently I do what you've said: commenting out "restrict edit time", changing the entry, commenting in "restrict edit time". There are already some commands specifically for the admin:   tags, posted by Lech on Wed Aug 7 02:57:55 2019  Hello, Is it possible to create tags for new entries in elog? I understand it would have to be some kind of mix between Extendable options and moptions. Currently, whatever is entered in extendable options forms one option, while usually for tags, words separated by # form different tags. As usual with       Re: tags #testtag, posted by Stefan Ritt on Wed Aug 7 17:16:30 2019  While tags are not explicitly foreseen, you can use moptions and filter with them. Look at this logbook for example: Click on "Find", then select one or more boxes of the "OS" attribute, and you will see the filtering. Another option is to use freetext in the subject for example. I added "#testtag" in this subject, so you can search for the text "#testtag" and will find this entry.   Calculations & Interfacing a DataBase with Elog., posted by John on Sat Jun 22 06:52:32 2019  Hi, I am trying to calculate two or more Elog fields and then return the value to Elog. I am currently learning Perl to do this. I realize JS can do this.. but so can IBM Basic ;)  I am savy with other db techniques like sql. My question is before I get too far along with this project, is it safe to say the current storage of Elog data is 'Flat File' database? I also want to find out if it would be better to try and grab the data prior OR        Re: Calculations & Interfacing a DataBase with Elog., posted by Stefan Ritt on Sat Jun 22 10:07:08 2019  Yes elog stores data in a flat file database. Go to your logbook directory and look for files YYMMDDa.log where you find all data. Some people do a post submit call to scripts, other integrate JS directly on each page (e.g. via "bottom text" option where you can load a whole JavaScript file), then pick the fields and do calculations directly in the edit window.          Re: Calculations & Interfacing a DataBase with Elog., posted by John on Sat Jun 22 10:21:39 2019  Thanks Stefan soo much. As I've said, I will update this post(s) as I make any progress :) John Stefan   enable batch file execution, posted by dev on Wed Jan 28 18:12:53 2015  How to execute  the batch file  in elogd       Re: enable batch file execution, posted by Stefan Ritt on Wed Jan 28 18:17:15 2015  Modify the server start command in the Windows Registry. Or start the elogd server directly in a command window with "elogd -x", after "cd" to the elog installation directory. dev          Re: enable batch file execution, posted by dev on Wed Jan 28 18:21:17 2015  I tried it but still it gives error like Shell execution not enabled via -x flag                Re: enable batch file execution, posted by Stefan Ritt on Wed Jan 28 18:27:44 2015  Stop the old server first, but we told you this already on elog:67770. If you don't follow our suggestions we cannot help you. dev                Re: enable batch file execution, posted by dev on Wed Jan 28 19:18:24 2015  From the command mode i am not able to stop and start  (elogd stop). But i can start/stop from services  .Kindly help  me stopping/starting it from command  Stefan                   Re: enable batch file execution, posted by Stefan Ritt on Wed Jan 28 19:39:50 2015  May I kindly ask you to Google how to start/stop a service from the command line. dev wrote: From the command mode i am not able to stop and start  (elogd stop).                      Re: enable batch file execution, posted by dev on Wed Jan 28 19:50:41 2015  First of all thanx for your kind help. Kindly help me on the following problem. I have a logbook which keeps the record of all fault booked by different subscriber.this logbook has three attribute downtime,uptime & total duration (date &time format) . I want to calculate the total duration automatically whenevr uptime value is given and                         Re: enable batch file execution, posted by Stefan Ritt on Wed Jan 28 19:57:32 2015  This is not possible with ELOG. May I suggest that you use a spreadsheet for that. dev wrote: First of all thanx for your kind help. Kindly help me on the following problem.                            Re: enable batch file execution, posted by dev on Wed Jan 28 20:00:15 2015  Sir, how to use that spreadsheet  can the calculation is possible by running a batch file .  Stefan                               Re: enable batch file execution, posted by Stefan Ritt on Wed Jan 28 20:03:05 2015  https://docs.google.com/spreadsheets dev wrote: Sir, how to use that spreadsheet                                   Re: enable batch file execution, posted by dev on Wed Jan 28 20:07:48 2015  Is it as good as Microsoft excel  sheet. but how can achieve my aim of calculation  how how to integrate it with elog  Sorry for disturbing yau again and again                                      Re: enable batch file execution, posted by Stefan Ritt on Wed Jan 28 20:31:58 2015  I meant to use it instead of ELOG. Spreadsheets allow calculaiton of dates, etc. So you can achieve what you need. Again: WHAT YOU WANT IS NOT POSSIBLE WITH ELOG. dev                                        Re: enable batch file execution, posted by Frank Baptista on Sat Jun 15 23:44:35 2019  I have not tried these, but since CKeditor works so well, you may want to consider taking a look at integrating jQuery Calx or jExcel...just for fun. Stefan Ritt wrote: I meant to use it instead   Write by a .dll instead of the elog.exe, posted by Marcel Krenz on Tue May 21 15:05:25 2019  Dear All,   is it possible to write to the elog instead of the Command line throug a .dll       Re: Write by a .dll instead of the elog.exe, posted by Stefan Ritt on Tue May 21 17:20:19 2019  I presume you want to write from another program. You can call a command line shell (done via the "system()" command under C) which then calls the elog executable. If you absolutely want a DLL, you can einter try to compile one yourself using the fuctions in elog.c, or use the curl DLL with which you can also submit elog entries. See elog:68597 for usage of curl. While curl is usually executed from the command line, there is   Pinned entry, posted by Giuseppe Cucinotta on Thu Apr 18 12:29:05 2019  Hi everybody, sorry if this question has already been posed (I did a quick search but I didn't found anything): elog sorts entry by ID, I wonder if it is possible to pin an entry in order to be always on top of the page independently on its ID.       Re: Pinned entry, posted by Stefan Ritt on Tue Apr 23 10:00:48 2019  This is not directly possible, but you can configure it with a trick. Create an attribute "pinned", make it of type "boolean", and set the start page such that it sorts using the "pinned" attribute: Atributes = ..., Pinned          Re: Pinned entry, posted by Giuseppe Cucinotta on Tue Apr 23 11:02:32 2019  Thank you very much! It worked great! Beppe Stefan          Re: Pinned entry, posted by Finn Junker on Tue May 21 15:42:46 2019  Hello Stefan Works great and very usefull - but not when you use reverse sort = 1?. Is there a way to get both. Pinned first and then the rest i reversed order (highest ID on page 1)   How to pre-fill an attribute that was added later, posted by Antonio Bulgheroni on Tue May 21 11:57:50 2019  Dear all,  I have a question about my logbook. I have recently added a new attribute to my logbook and I would like to prefill all previous entries with a fixed value for this field. Is it possible?        Re: How to pre-fill an attribute that was added later, posted by Stefan Ritt on Tue May 21 12:08:17 2019  Find all entries which have this attribute empty. Then click on Select, then select all, then click on Edit, then change all values. There might be a limit how many entries you can select in one go, so you might have to do it in bunches. Antonio          Re: How to pre-fill an attribute that was added later, posted by Antonio Bulgheroni on Tue May 21 12:51:08 2019  Thanks, it worked great!  Stefan Ritt wrote: Find all entries which have this attribute empty. Then click on Select,   custom subject for mail info, posted by Daniel Pfuhl on Thu May 16 18:00:22 2019  Hello, we are extensively using ELOG for documenting changes in our infrastructure. It is very helpful for us. To avoid multiple documentation efforts it would be even more helpful if the subject of an ELOG entry also could be the subject of the mail which       Re: custom subject for mail info, posted by Stefan Ritt on Mon May 20 16:39:50 2019  Use Email subject = $Subject or a bit more detailed Use Email subject = ELOG Ticket: "$Subject" posted by $Author          Re: custom subject for mail info, posted by Daniel Pfuhl on Mon May 20 18:10:02 2019  thank you! Stefan Ritt wrote: Use Email subject   Windows Server 2012 - moving logs, posted by Lesley Herren on Thu May 16 01:13:31 2019  We are installing a new data center which will be based on Windows 2012 servers.  Our current center is on Windows 2008 and will be decommissioned this year - 2008 servers (because of the security issue) will not be allowed in the new data center.  So game plan is to install latest ELOG (3.1.2) on the 2012 server at the new data center and move the logs over from the 2008 server.  I've looked through entries and do not see anything about       Re: Windows Server 2012 - moving logs, posted by Stefan Ritt on Thu May 16 09:12:52 2019  Just stop the server. Move your elog directory to the new server (including elogd.cfg, logbook directories, ...). Then check that the elogd.cfg needs modifications, like the URL which might have changed, then start the new server. V2.9.2 did have an old data format, which *should* be converted automatically. But first try it out before deleting the old server.          Re: Windows Server 2012 - moving logs, posted by David Pilgram on Thu May 16 21:49:06 2019  Hi Lesley, Perhaps I can restate Stefan's comment.  The data structure of an elog entry, or indeed the structure of daily file(s) for any particular logbook has not changed between v2 and v3.  What has changed is the directory structure.  A set of sub-directories (named by calendar years)          Re: Windows Server 2012 - moving logs, posted by Lesley Herren on Thu May 16 23:07:53 2019  Thank you Stefan - it will take a couple of months to set up (many servers being built at the new farm).  I will update you on the success of the files converting automatically.   add a little function--go to the specified page number, posted by Xuan Wu on Tue May 14 09:40:58 2019  Hi all, I added an input widget for pagination. I'd like to share it here, maybe someone needs. If there are many pages,  specifying the page number will be useful.    Shell execute, posted by Alan Grant on Tue May 14 06:07:07 2019  I have the line in my elog config to run a Powershell script when submitting a New entry. I just send an email as a test: Execute New = "Powershell.exe -ExecutionPolicy Bypass D:\SendEmail.ps1" Fyi, the Powershell statement itself (Send-MailMessage -From 'MeterElog@winnipeg.ca'   Execute attribute, posted by Alan Grant on Fri May 10 04:34:36 2019  Apart from an inline shell command that can be run with the Execute attribute, is it possible to run an external script file? I would like to run a Powershell script with the Elog attribute data parameters passed to it upon Submit New entry.       Re: Execute attribute, posted by Stefan Ritt on Fri May 10 08:19:08 2019  I don't understand your question. There is no "inline" vs. "external" script. Using the "execute new = <command>", you run a script on the server side. Can be powershell under Windows or bash/csh under Linux. I remember however that there has been issues under recent windows in passing parameters to the shell. Linux certainly works fine, we usse it all the time.          Re: Execute attribute, posted by Alan Grant on Fri May 10 15:01:52 2019  I think it was just a matter of my specific interepretation of the documentation, ie: using native OS shell commands vs any script language file containing shell commands or any app for that matter. Nevertheless I think you've answered my questiuon so it's all good. Thanks Stefan.   Does there is a way to no the $message_id when creating a new submission, posted by Lagarde on Thu May 9 13:34:55 2019  Hello, I would like to know if it's possible to know the message_id of when creating a new entry in elog ? I would like to do something like this Preset text = $message_id        Re: Does there is a way to no the $message_id when creating a new submission, posted by Stefan Ritt on Thu May 9 16:42:13 2019  No, the message ID gets assigned only when you submit the entry. Stefan Lagarde   Last default = <n>, posted by Alan Grant on Mon Apr 29 02:41:15 2019  According to the doc on the setting "Last default = <n>" it is intended to restrict Quick Filter searches to the last (n) days of entries, however when I add "Last default = 28" to config it still returns entries far older then 28 days when using the filter search. Am I misunderstanding, or implementing it wrong? We must restrict searches through QF to reduce load.       Re: Last default = <n>, posted by Stefan Ritt on Mon Apr 29 13:12:56 2019  Indeed the description of the "Last default = <n>" option is not clear. I just updated that. If you have a quick filter "Date", then you have different options there like "Last day", "Last 3 days", "Last week", "Last month", "Last 3 months", "Last 6 months", "Last year". Each of these options has an underlying number of days, which are 1, 3, 7, 31, 92, 182, 364. In the "Last          Re: Last default = <n>, posted by Alan Grant on Mon Apr 29 17:48:13 2019  I just changed to Last default = 31 and even restarted elogd.exe but it still finds a given string older than 31 days. Also the default Select Period box value next to the QF's remains at All Entries. My understanding is it shoud behave like Find, where Show Last Default = 31 should default the display to Month, and also only search within the last month of entries.             Re: Last default = <n>, posted by Stefan Ritt on Wed May 1 11:06:04 2019  It works for me. Have you tried other values (1, 3, 7, ..)? The key is that the quick filter changes to "Last month". If it does not, there must be some trivial error, like type in elogd.cfg, you modify the wrong logbook, have a very old version of elog etc. Stefan             Re: Last default = <n>, posted by Stefan Ritt on Wed May 1 11:08:10 2019  You say "Show Last Default = 31". This options applies only to the "Find" page, the option "Last Default = 31" works for the quick filter. Probably you have to change "Show Last Default" to "Last Default". Stefan                Re: Last default = <n>, posted by Alan Grant on Wed May 1 15:28:41 2019  I was just referring to "Show last default" (under Find) as a parallel example of how I assume "Last default" should function on the List page. I also tried values 3 and 7 but "All entries" still displays in the "List period" box. A restart of elogd makes no difference.                   Re: Last default = <n>, posted by Stefan Ritt on Fri May 3 15:50:39 2019  I just tried your elogd.cfg, and it works fine for me. So no idea what is wrong in your case. Stefan                      Re: Last default = <n>, posted by Alan Grant on Fri May 3 16:02:33 2019  Ok thanks for taking the time to try it out. I definitely still show "All entries" in any case, so I will continue to try to resolve on my end and if I find the cause or solution I will share back on the forum. First though, I noticed you ran 3.1.4 whereas I'm still on 3.1.2. I'm also on Windows Server 2016 and IE 11. Do you think any                         Re: Last default = <n>, posted by Stefan Ritt on Fri May 3 16:22:23 2019  Yes I always run the current version from bitbucket. I haven't touched that code for "last default" since a long time, so I don't expect the verison to make a difference. Unfortuantely I have not Windows Server or IE for testing. Alan                            Re: Last default = <n>, posted by Alan Grant on Fri May 3 16:29:00 2019  Thanks again. I noticed in the Change Log for 3.1.4 that there's a reference to something done with "Last default" in Sept 2018 so I think I will try to set up a Linux instance and try out 3.1.4. Regards.                               Re: Last default = <n>, posted by Stefan Ritt on Fri May 3 16:48:47 2019  Indeed you're right (my memory is fading, argh). Please try 3.1.4. Stefan Alan   elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Tue Apr 23 14:06:36 2019  Dear all. I am running elog  elogd 3.1.4 , revision ead6bbc6       Re: elogd Service exited with abnormal code: 1, posted by Stefan Ritt on Tue Apr 23 14:26:51 2019  This kind of behavior we typically see if some elog entry is corrupt. After a few hours you might access this corrupt entry by accident, and then the server stops. If you see however this behavior on a fresh logbook with no corrupt entries, then the problem must lie somewhere else. Do you see the same problem running under linux?          Re: elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Thu Apr 25 11:16:06 2019  Thanks for the prompt feedback. a) I confirm that the problems shows up also when running interactively the elog through  elogd -p 8080 b) I am trying to catch the exit using lldb on the mac machine. I will be able to give you some feedback on that I hope in the next week (not             Re: elogd Service exited with abnormal code: 1, posted by Stefan Ritt on Thu Apr 25 11:27:21 2019  What you recommend is enough. Just make sure to compile elogd with the flags mentioned before, and when you get the segment violation, do a stack trace inside the debugger to learn where the fault happend. Maybe also print the contents of some variables at the current location. Stefan                Re: elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Tue Apr 30 12:47:46 2019  I was finally able to catch the crash. I paste below the info provided by lldb.. It seems that it has something to do with the 'first' logbook that contains 115 entries and is displayed in 6 pages.                   Re: elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Tue Apr 30 14:07:52 2019  Actually it is a little bit more difficult than that. I have restarted elogd and got a crash but this time it seems related to a different logbook... Below the stack trace..                      Re: elogd Service exited with abnormal code: 1, posted by Stefan Ritt on Wed May 1 10:59:59 2019  Ok, that helped. It looks to me that the strlcpy() function from MacOSC does not like overlapping stings as parameters. Funny that this does not happen on my Mac (Mojave 10.14.4). I fixed the two cases you reported (lines 18712 and 19021) and committed the changes to bitbucket, from where you can pull and test it again (see https://elog.psi.ch/elog/download.html for instructions). If it happens                         Re: elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Thu May 2 09:47:41 2019  Thanks a lot for providing a quick fix! The elog is now happily running since two days without problems :) I will get back to you in case anything else shows up.   How to sort on any field?, posted by John on Tue Apr 30 05:52:44 2019  Hi, I was wondering if this is possible. I've tried to sort on anything other than the first few fields and although the screen refreshes like it is 'doing something', it does NOT sort. Sometimes it will take me to the last page of my data, but still no sorting. I use Debian Linux verson of Elog. There have been no other issues. I need to figure out how to do this without parsing it to another program first. Thanks again for this wonderful       Re: How to sort on any field?, posted by Andreas Luedeke on Tue Apr 30 14:20:34 2019  Sorting does work fine, if you do it correctly. From your post I cannot even guess what you've tried - let alone tell you what you did wrong. Please post your config, some example entries and a description of what you've tried, what you expected to happen and what actually happened. Screenshots are often very useful as well.          Re: How to sort on any field?, posted by John on Tue Apr 30 19:07:17 2019  Hi Andrea and thank you soo much  for your kind and prompt reply! I believe the issue will be solved as I have the information I need to proceed. I was just wanting to verify that sorting indeed is alloud on ALL fields.  I cannot send the exact config as it is a work project, but I can replicate with fake fields and data if necessary in the future. I believe my errors are because I am either using field names which are 'special' to the   exclude access to a number of users in one logbook, posted by Nikolas Patronis on Wed Apr 24 09:15:26 2019  How can I exclude the access of a number of users in one (out of two) logbooks running in the same server and URL?       Re: exclude access to a number of users in one logbook, posted by Stefan Ritt on Tue Apr 30 09:34:52 2019  You have a look here: elog:68936 Nikolas Patronis wrote: How can I exclude the access of a number of users in one (out of   elog program does not respect "Allow edit" list, posted by Heinz Junkes on Mon Mar 11 11:18:02 2019  submissions via the elog - program can overwrite entries even if the user has no edit rights       Re: elog program does not respect "Allow edit" list, posted by Heinz Junkes on Wed Apr 24 09:43:02 2019  Since there's no answer to that. I am the only one with the problem? Did I just configure something wrong? Thanks Heinz          Re: elog program does not respect "Allow edit" list, posted by Stefan Ritt on Wed Apr 24 10:15:23 2019  There are two ways: 1) Use different password files for different logbooks. Each password file contains only those users which have access to that logbook. 2) Use "Login user = <usr list>" to restrict access to certain users in that list.             Re: elog program does not respect "Allow edit" list, posted by Heinz Junkes on Wed Apr 24 10:21:58 2019  Thanks for the answer. The real problem is that you can overwrite existing entries even if you have set an entry to "read only", i.e. you have forbidden further editing. Heinz                Re: elog program does not respect "Allow edit" list, posted by Stefan Ritt on Wed Apr 24 10:29:00 2019  There is no "read only" flag. Please describe what you exactly did. Probably you want "Restrict edit time" for that. Stefan Heinz                   Re: elog program does not respect "Allow edit" list, posted by Heinz Junkes on Wed Apr 24 11:03:26 2019  Sorry,  I meant "read only" by using "Restrict edit time" settings. e.g. Restrict edit time = 24                      Re: elog program does not respect "Allow edit" list, posted by Stefan Ritt on Wed Apr 24 11:30:37 2019  So you are telling me that "Restrict edit time" is not working correctly? In order to fix any problem, I have to reproduce it. Can you post a minimel elogd.cfg file with which I can reproduce the problem? Stefan                         Re: elog program does not respect "Allow edit" list, posted by Heinz Junkes on Wed Apr 24 11:56:24 2019  I ask my users where they had the problems and then create a demo for testing. Thanks Heinz Stefan                            Re: elog program does not respect "Allow edit" list, posted by Heinz Junkes on Fri Apr 26 11:24:21 2019  Stefan, will send the info off this forum. Heinz Heinz                               Re: elog program does not respect "Allow edit" list, posted by Stefan Ritt on Fri Apr 26 17:22:46 2019  Ok, I found the issue. The "Restrict edit time" is only checked when one clicks on "Edit" in the browser. The elog command line tool does not really an edit, but just submits an entry with an (old) ID. I added a check also for that case so now it should work. The commit is in git. Stefan   Can't subscribe email to logbooks in different top groups, posted by Ben Loer on Thu Apr 11 20:31:55 2019  We're running elogd behind an apache proxy server, with Authentication = Webserver. We have top groups configured, but a single shared password file. If a user is looking at a particular logbook and goes to the Config link, they are presented with a list of checkboxes for email subscription to logbooks in that top group.  Clicking "Save" will remove all email subscriptions from all other top groups.       Re: Can't subscribe email to logbooks in different top groups, posted by Stefan Ritt on Fri Apr 12 15:43:42 2019  Top groups should use separate password files, otherwise things can mess up. Stefan Ben   How to edit Elog landing pages., posted by John on Thu Mar 14 06:38:12 2019  Hi and thanx for such a wonderful program! I was wondering how I might edit, change or add to the landing pages. In other words the first pages that show up (or any for that matter) when you login to a book. I can view the code ok in my browser using that function, but when I search for the actual page and it's locale, I cannot find it. Is it created on the fly by the server? If so, how can I change them.. as I want to add for instance javascripts       Re: How to edit Elog landing pages., posted by John on Sun Mar 17 00:40:42 2019  Well I answered part of my own question already.. I can have a start page different from what is default, and I can edit the orginal one by simply copying it and modifiying it to my hearts desire. I still have isues  after making menu selections from that page tho,  when the program (server) takes me to a site called  for example: ../forum/index.html?cmd=Config. I cannot find out how to prevent or modify this behaviour. I am supposing tho, that          Re: How to edit Elog landing pages., posted by Stefan Ritt on Thu Apr 4 12:53:09 2019  Per default, all pages are created dynamically by elogd directly from its C code. So nothing to change easily except hacking the code. There is one exception which is the start page you found already. To change any other page, you have to modify the C code. There is one more (dirty) trick: You can sneak in JavaScript code on every page via the "bottom text" option. This code can then modify the DOM tree and changes pages, but you need to program this in JavaScript.             Re: How to edit Elog landing pages., posted by John on Thu Apr 4 20:30:29 2019  Wow Stefan thanks for your kind reply.  This gives me a reason to finally pickup JavaScript, which I am finding both easy and fun, esepcially with all the modules/coding out there already, which makes things easier to do while learning it! I will let you know as I progress on my 'top secret' hack of your masterpiece ;)   elog.css and lock.png fail to load with top groups, posted by Ben Loer on Thu Mar 21 16:14:00 2019  As the title says, we have our elog running behind an Apache proxy that is also providing authentication. We also have top groups enabled.  The first time a user views a top group page with a fresh browser cache, the index is delivered, but requests for elog.css and lock.png are returned with http 302 with location set to the elog root.  (I.e., if the server is proxied under server.example.com/logs,  the first request for server.example.com/logs/TopGroup1/elog.css       Re: elog.css and lock.png fail to load with top groups, posted by Stefan Ritt on Thu Apr 4 12:12:58 2019  Looks more like a bug to me. Will investigate. Stefan Ben   elog client through proxy, posted by gibelin julien on Mon Mar 25 12:31:34 2019  Dear users, we started an elog serveur (using ssl) and open to the world which is working fine. However I am trying to access it via the command line client, from a computer that uses a proxy to connect to internet.       Re: elog client through proxy, posted by Stefan Ritt on Thu Apr 4 11:57:46 2019  The "elog" client does unfortunately not support proxies. You could however achieve the same with the "curl" tool. Have a look at elog:68597 Stefan   Hiding Logbook tabs, posted by Alan Grant on Thu Mar 28 21:55:14 2019  I know you can restrict access to logbooks on per user basis but can anyone tell me if it is possible to HIDE certain logbook tabs/groups on per user basis (ie, so they would just see logbooks they are authorized to see)?   Reverse proxy setting of Elog for Apache httpd 2.4 so that changing password windows works ?, posted by Takashi Ichihara on Tue Mar 19 06:13:03 2019  In CentOS 7.6 + Apache httpd-2.4.6 + ELOG V3.1.4 environment with Reverse Proxy setting of /etc/httpd/conf/httpd.conf  :       Re: Reverse proxy setting of Elog for Apache httpd 2.4 so that changing password windows works ?, posted by Takashi Ichihara on Tue Mar 26 06:41:21 2019  The problem was resolved. I forgot to do this statement... https://elog.psi.ch/elog/adminguide.html Because elogd uses links to itself (for example in the email notification and the redirection after a submit), it has to know under which URL it   Interfaced with SSO, posted by Patricia Mendez Lorenzo on Fri Mar 22 09:53:39 2019  Dear Supporters,   I am evaluating the elog software as lobgook for high energy pgysics and I was just wondering the interface with SSO from the login point of       Re: Interfaced with SSO, posted by Andreas Luedeke on Fri Mar 22 11:52:46 2019  ELOG understands kerberos authentication (See https://elog.psi.ch/elog/config.html#access). If your SSO works with kerberos, then your SSO user name and password can be used to sign in to ELOG. But I'm not sure if that is what you are asking for...   HTML editor not working after updating to V3.1.4, posted by Ross Gibson on Tue Mar 19 23:24:48 2019  Since updating to v3.1.4 the HTML editor has stopped working. If I switch to HTML encoding, the editor appears with a blank field, cannot select or type in field and none of the buttons work. I have tried reverting to earlier versions, but the issue persists. Any suggestions to rectify?       Re: HTML editor not working after updating to V3.1.4, posted by Stefan Ritt on Wed Mar 20 01:12:36 2019  Have you cleared your browser cache? There might be some old JavaScript stored there. If that does not help, remove elog and reinstall it to make sure to have the correct libraries on the server (first back up you logbooks, then restore them afterwards).          Re: HTML editor not working after updating to V3.1.4, posted by Ross Gibson on Wed Mar 20 06:50:57 2019  Thanks Stefan. Tried these without success. I tried opening in another browser and it works fine in Firefox or Internet Explorer - the problem only appears in Microsoft Edge. Perhaps its an issue with a Microsoft update (corporate rollout) to Edge and just a coincidence that I noticed it after updating Elog.   Very long URLs in message list corrupt layout, posted by Ederag on Sun Mar 10 01:07:53 2019  First, thank you so much for elog; after using it for about 3 years, it has proven really handy and reliable. When there is a very long URL in a message in "plain" encoding,   Chain certificate, posted by Michal Falowski on Mon Mar 4 18:55:09 2019  I tried to run elog with SSL so I created key and crt files. In crt file I added client certificate and intermediate certifacte. Unfortunately, when I try to run openssl s_client -showcerts -connect myexample.com:443 I got only the first certificate from the chain. Anyone has idea why this happens?   Mirror synchronization and file servers, posted by Frank Baptista on Fri Mar 1 19:18:53 2019  We have a number of temperature chambers – each has its own laptop running a local ELOG server, with unique logbook for each.  Using the mirror feature, these individual logbooks periodically synchronize to a single remote desktop server, which has a copy of each of the logbooks.  All of that works great, as long as each of the ELOG servers are storing the logbook(s) to their respective local hard drive.       Re: Mirror synchronization and file servers, posted by Stefan Ritt on Mon Mar 4 13:35:13 2019  Sounds really strange to me. The remote server does not "know" that "S:\" is a network drive, so the syncing process should work exactly as before. The only idea I have is that the access to the network files take pretty long, and you run into a timeout during syncing. We had this in the past (for AFS netwhor shares, not Windows shares), where sometimes we have a blocking behaviour where the file access lasted 10-20 seconds, and   New feature request for Options list, posted by Alan Grant on Wed Feb 20 22:24:05 2019  Is it possible to include an option in the next release to have the Options list reference a text file of attributes rather than explicity listing the attributes in the Config file directly? This would make it much easier to maintain a particular list that is referenced in several log books.       Re: New feature request for Options list, posted by Stefan Ritt on Wed Feb 20 22:45:39 2019  I can put it on the wish list. Alan Grant wrote: Is it possible to include an option in the next release to have the          Re: New feature request for Options list, posted by Andreas Luedeke on Thu Feb 28 14:56:50 2019  Just my two cent - I would have many very good applications for that feature: Keep option lists identical over different logbooks. Keep option lists identical over different applications. Create option lists from a database - that allows to use the options in many applications and in the database; e.g. a list of systems with a failure database,             Re: New feature request for Options list, posted by David Pilgram on Thu Feb 28 16:03:36 2019  May I slip my vote in for this, especially if it would allow more than 100 attributes (the default, and I do know how to increase it). I even considered cutting that into two groups,. the first being words like "New", "Re-" and the second being actions.  Clunkey and binned.   Migration from 3.1.2 version to 3.1.4, posted by Vladimir Travalja on Tue Feb 26 14:26:13 2019  Hi, sorry for bugging you with this, but I could not find any information for making migration of elog system from one server to another.       Re: Migration from 3.1.2 version to 3.1.4, posted by Stefan Ritt on Tue Feb 26 14:31:00 2019  To move an elog instance, just stop the old server, move the configuration file elogd.cfg and the logbook directory to the new server, and start the new server. If the URL of the server changes, you have to adjust it in elogd.cfg.  Stefan   elogd hangs on self referencing log entry, posted by Kester Habermann on Mon Feb 25 17:03:50 2019  Hello, Somehow when replying to a log entry, a log entry was created that was referring to itself. How this happened, I have no idea. The effect was that each time this enty was loaded, the elogd started to hang, going to 100% load and not responding to any http requests anymore. This problem can be   Unwanted double entries eg. double clicking submit button, posted by Finn Junker on Wed Feb 13 09:29:36 2019  I'm having a minor issue that were getting double entries due to the user is using the "submit" button more than once. I seems like when there is a lag either on the machine or on the network it is possible to tap the "submit" button more than once resulting i a double or triple entry containing the same text and a almost identical timestamp.       Re: Unwanted double entries eg. double clicking submit button, posted by David Pilgram on Wed Feb 13 10:58:37 2019  I too have this as an occasional issue, although in my case due to a dodgy pointer.  I too manually delete the entries. Interestingly, it gives double entries - and thus the start of a branch - even in logbooks were branches are not allowed. Finn          Re: Unwanted double entries eg. double clicking submit button, posted by Stefan Ritt on Wed Feb 20 15:14:32 2019  I just committed some code which disables the "Submit" button after the first click and replaces the text with "Please wait...". So double submits should not be possible any more. David             Re: Unwanted double entries eg. double clicking submit button, posted by Alan Grant on Wed Feb 20 21:56:32 2019  I'm also happy to see this change implemented as we've had to deal with the same issue at times as well. Will this change be incorporated into the latest version (314-2, aka elog-latest.exe), or will there be a new version release (that is not in Changelog yet)? If so, can you give any ETA on this new code availability?                Re: Unwanted double entries eg. double clicking submit button, posted by Stefan Ritt on Wed Feb 20 22:41:23 2019  "I committed" means that the change is sent to the GIT repository. People who compile from the source code can pull and compile immediately. Windows users have to wait until I do the next release. I'm developing on a Mac and have to boot a special (old) Windows machine to compile the .exe which each time takes me about one hour including documenation updates, changelog updates, upload of zip files etc. Since my main job is heading a research                   Re: Unwanted double entries eg. double clicking submit button, posted by Finn Junker on Thu Feb 21 08:51:21 2019  Thank your very much for your work on this - as i mentioned this is a minor issue. Kind Regards Finn   Images in notifications, posted by Patrick Sizun on Fri Feb 8 14:43:13 2019  Hello, I am using Elog v3.1.1. When entries contain embedded images, these images are attached to the email notifications but are not properly displayed in the body of the email.       Re: Images in notifications, posted by Stefan Ritt on Fri Feb 8 14:57:05 2019  Your observation is correct. The mailer inside elog should scan all email bodies and replace all <img> tags correctly. I put that on my todo list. Stefan Patrick   quick filter not working for attributes with special char , posted by Stefano Lacaprara on Tue Feb 5 07:31:44 2019  Hi,   I'm using elog 3.1.3 and I have an elogbook with an attribute with name  Attributes = Author, CO2 Temp [deg], ...       Re: quick filter not working for attributes with special char , posted by Stefan Ritt on Tue Feb 5 08:10:32 2019  No, there is no quick workaround. The only way is to go through your logbook files manually (or with a script), and replace all occurrences of that attribute. Stefan   Logbook architecture and availability, posted by Frank Baptista on Fri Dec 14 15:46:14 2018  I have a setting which makes ELOG a perfect solution, but there's a situation that I'm struggling to get my head around. We have 3 separate laboratories, each one containing a number of temperature chambers, which run almost constantly over a number of shifts. Each temperature chamber has it's own logbook (laptop). So far, pretty simple.       Re: Logbook architecture and availability, posted by Stefan Ritt on Fri Dec 14 16:00:45 2018  Sure that's easy. Install elog on each laptop separately, so they run without network. Then, set up a central elog server, and use "mirroring" as explained in the documentation at https://elog.psi.ch/elog/config.html#mirroring So when ever the entwork comes back, you execute a manual mirror operation, and your new entries will be pushed to the central elog server.          Re: Logbook architecture and availability, posted by Frank Baptista on Fri Dec 14 17:22:31 2018  Thanks Stephan! I guess I was making it harder than it is.  I'm still a little fuzzy -- in this instance, am I correct in saying that each laptop would be considered a "master", and the remote (network) server considered the "slave"?  Also, I'm not sure quite sure -- which server should be assigned responsibility for performing periodic synchronization between the laptop and the central elog server?             Re: Logbook architecture and availability, posted by Stefan Ritt on Fri Dec 14 20:05:08 2018  I would call the laptops the "master" being responsible for pushing data to the central server which you can call "slave"   Stefan                Re: Logbook architecture and availability, posted by Frank Baptista on Fri Dec 14 20:52:46 2018  Thank you again -- very much appreciated!                    Re: Logbook architecture and availability, posted by Frank Baptista on Fri Feb 1 19:20:35 2019  I've got things working - sort of.  Ran into one strange problem that has me scratching my head.  I have two different laptops, each running a local instance of their own logbook.  Both are functional, but for some strange reason, one looks great, and the other is missing its graphic format.  I've attached a screen capture of that logbook, and a copy of the config file.  Do you see something that I've done wrong?                      Re: Logbook architecture and availability, posted by Frank Baptista on Fri Feb 1 21:59:46 2019  Sorry -- dumb mistake.  I moved the "theme" files to the resource folder.  Works like a champ...life is good!    MIME-version header duplicated in e-mail messages., posted by Michal Falowski on Thu May 4 17:20:36 2017  When there are attachments in an entry, logbook is adding additional "MIME-Version" header to e-mail messages. Spam filter in our university system is mostly giving warnings: X-Amavis-Alert: BAD HEADER SECTION, Duplicate header field: "MIME-Version" But sometimes it is not redirecting       Re: MIME-version header duplicated in e-mail messages., posted by Stefan Ritt on Wed Jan 9 11:43:48 2019  I just checked the current installatin, and just found one MIME-Version in the header, even with attachments: MIME-Version: 1.0 --------------717E3059287C82F12BC14941   inactive users, posted by Devin Bougie on Wed Apr 27 21:27:36 2016  Hello, Is it possible to remove the "active" checkbox a user sees when they click on "config"?  Alternatively, is it possible to have a new user arrive directly       Re: inactive users, posted by Stefano Lacaprara on Wed May 31 11:45:06 2017  Hi,   I reopen this old thread since I'm having a similar problem.          Re: inactive users, posted by Andreas Luedeke on Wed May 31 13:28:51 2017  > Hi, >   I reopen this old thread since I'm having a similar problem. >              Re: inactive users, posted by Stefano Lacaprara on Wed May 31 16:02:46 2017  Hi,   a possible solution is to change the current SetAll() and SetNone() javascript functions to something like:                Re: inactive users, posted by Stefano Lacaprara on Mon Feb 26 18:27:09 2018  Hi,   sorry to bother again on this issue, but it is causing me some trouble, as many of my users are using the "SetNone" button in their config page, and doing so they deactivate their account, which I have to                    Re: inactive users, posted by Stefan Ritt on Fri Dec 21 14:59:05 2018  Thanks for the fix, I merged it into the current development branch. Stefan   CSS reference in Email for private logbooks, posted by Andreas Luedeke on Mon Aug 21 14:27:50 2017  We operate ELOG in an intranet. Many logbooks do send out emails; several use HTML content formatting. If I watch HTML formatted emails from the intranet, then everything is fine. If I try to read them from home, my email client hangs when it tries to read the CSS file from out intranet (URL: https://elog-gfa.psi.ch/SLS/elog.css). Is there a way to set a URL for the email CSS? Then I could simply       Re: CSS reference in Email for private logbooks, posted by Stefan Ritt on Fri Dec 21 14:04:41 2018  I changed the code ot include the CSS file directly in the email body. So no need any more for external CSS files. I dropped the "Email CSS URL" option as well. Stefan   xmalloc error when filling entries and chaning page, posted by Antonio Iuliano on Wed Dec 12 10:44:57 2018  Dear ELOG experts, the ELOG server on our lab crashes  continuosly, when we add a new entry or even if we click the arrows to navigate between entries. Following the FAQ on the website, I have used gdb and found the following error:       Re: xmalloc error when filling entries and chaning page, posted by Stefan Ritt on Fri Dec 21 13:00:50 2018  I tried to reproduce the problem but could not. The config file uses "emtpy.html", "filtermenutext.html" and so on which I don't have. Same with eventlocation. Rather than sending me all the files, can you strip down your elogd.cfg to a minimal version where you still see the problem. Then give me all   French Language, posted by Yanick Vachon on Tue Nov 27 20:06:17 2018  Hi, When i set Language = French in global config it works in french until i logout, after i can't login anymore, even if i enter my user and password i always stay at the login window, the only way to login again is to edit the Elogd.cfg file in Elog directory, remove the Language = french and       Re: French Language, posted by Stefan Ritt on Wed Nov 28 09:26:11 2018  I just tried myself with the current version 3.1.4 and it worked for me flawlessly. Maybe you want to upgrade. Stefan Yanick          Re: French Language, posted by Yanick Vachon on Tue Dec 4 21:30:13 2018  I Stefan, i got the problem again with the french version, i realised that if i open it with Chrome or Edge it's not working but with Internet Explorer it works envery times. Is there a way i can use it with Chrome?               Re: French Language, posted by Stefan Ritt on Wed Dec 5 08:41:07 2018  Have you tried to delete all cookies in Chrome? Stefan Yanick                Re: French Language, posted by Yanick Vachon on Wed Dec 5 14:38:51 2018  I've deleted the cookies and it works. Thanks! Stefan   Need to change port 25, posted by Yanick Vachon on Mon Nov 26 17:32:31 2018  Hi, We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter? Thanks       Re: Need to change port 25, posted by Andreas Luedeke on Tue Nov 27 08:19:11 2018  This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global The following options are specific to the [global] section: Port = <port>          Re: Need to change port 25, posted by Stefan Ritt on Tue Nov 27 08:59:45 2018  I believe Yanick means the SMTP port, not the port under which elogd is listening. The SMPT port is hard wired to 25, because port 587 was not yet defiend when I wrote that code. I can make this a variable, but only if it works. So Yanick can you test if port 587 accepts normal SMTP commands? We don't have such a new server at our lab and I cannot test it. Under Windows you can open a command prompt and telnet to the mail server:             Re: Need to change port 25, posted by Yanick Vachon on Tue Nov 27 15:21:31 2018  I Stefan, it works with the 587 port.                             Re: Need to change port 25, posted by Stefan Ritt on Wed Nov 28 16:24:43 2018  Ok, so I added the option  STMP port = xxx where you can specify 587 to override the default port 25. I committed the changes to bitbucket. Can you compile from sources, or do I have to                   Re: Need to change port 25, posted by Yanick Vachon on Wed Nov 28 18:23:59 2018  Good!  so, i've tried to compile but iwonder if i does it correctly, look at the error i got:                      Re: Need to change port 25, posted by Stefan Ritt on Thu Nov 29 09:56:45 2018  I put a new executable for you under https://elog.psi.ch/elog/download/windows/ It's named elog314-2.exe Best,                Re: Need to change port 25, posted by Yanick Vachon on Wed Nov 28 16:43:14 2018  Hello,  now we kwow it's working are you gonne send us a version with the SMTP port editable? Thanks!                   Re: Need to change port 25, posted by Stefan Ritt on Wed Nov 28 16:53:58 2018  Just read my post 20 mins ago! Stefan Yanick   messy code for chinese charactor, posted by Wenhao Huang on Fri Oct 26 08:56:59 2018  The Chinese character appears messy code. The encoding way is the default utf-8. How can I solve this problem?       Re: messy code for chinese charactor, posted by Stefan Ritt on Sat Oct 27 10:51:12 2018  Can you post a screenshot? [quote="Wenhao Huang"]The Chinese character appears messy code. The encoding way is the default utf-8. How can I solve this problem?[/quote]   How many "Extendable options" can I add?, posted by Devrim Esenturk on Fri Oct 26 14:22:59 2018  Hi I am trying to add "Extendable options" for some attribute as below example. However button to add new item for list appears only for the first "Extendable options", if disable the first with (;), button appears for the second. It means elog add new item button only the first       Re: How many "Extendable options" can I add?, posted by Grant Jeffcote on Fri Oct 26 16:46:52 2018  David, Try Extendable options = Require Model, Require Lens, Require Other,          Re: How many "Extendable options" can I add?, posted by Grant Jeffcote on Fri Oct 26 16:50:48 2018  Apologies that should have been Devrim (autocorrect again) :-( Grant Jeffcote wrote: David,             Re: How many "Extendable options" can I add?, posted by Devrim Esenturk on Fri Oct 26 19:15:19 2018  No problem :)  Your suggestion worked as it must be. I didn't see "Extendable options = <list>" on guide :/ I guess I need rest a little bit... :(   Buttons missing in ckeditor, posted by Roland Beyer on Thu Oct 11 10:51:17 2018  Hello everybody, we had to setup a new server for our elog some time ago because the old one crashed. We are now running version ELOG V3.1.1-0767eb0. In the previous installation we had these nice buttons for file upload, time stamp and equation editor, which are also available here in the       Re: Buttons missing in ckeditor, posted by Stefan Ritt on Fri Oct 12 10:17:20 2018  Have you selected "HTML" encoding (below the main message box). The HTML editor is not activated if you have "plain" text encoding. Did you try the default elogd.cfg file? If you modified the config file and did a mistake there, the program can for example not properly find all directories. Also makse sure you did a full install with "make install", not just update the executable.          Re: Buttons missing in ckeditor, posted by Roland Beyer on Fri Oct 12 11:56:26 2018  Dear Stefan, thanks for your hints. Meanwhile we already solved the problem. I think it was caused by the recovery from a backup version after the server crash ... and the retirement of the person who did the previous installation.   Compile issues on Fedora withe current elog source, posted by Allen Tuttle on Tue Sep 11 19:46:40 2018  Tried compiling on FC27 and 28, both result in binaries but with serious issues; writing data larger than then allowed. Example output: make  gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations       Re: Compile issues on Fedora withe current elog source, posted by Stefan Ritt on Wed Sep 12 11:10:18 2018  This warning is triggered by the use of the sprintf() funciton, which can write beyond the boundary of the destination string. I replaced it by snprintf(), which should make the compiler happy. Code is committed. Unfortuantely I have no FC27 here, so if there is still some waring with the current code, please post the full warning list here.          Re: Compile issues on Fedora withe current elog source, posted by Allen Tuttle on Wed Sep 12 15:25:07 2018  I would like to try the new code, I don't see it on elog/download/tar/. Do you keep updates elsewhere like on get or sourceforge? Stefan             Re: Compile issues on Fedora withe current elog source, posted by Allen Tuttle on Wed Sep 12 15:57:31 2018  A quick test suggests I can't just replace sprintf with snprintf. Original error: src/elogd.c:4503:4: note: ‘sprintf’ output between 1 and 542 bytes into a destination of size 256 [-Wformat-overflow=]          Re: Compile issues on Fedora withe current elog source, posted by Andreas Luedeke on Wed Sep 12 20:52:22 2018  Stefan said "code is commited": that means you can download the latest version from https://bitbucket.org/ritt/elog, as described in https://elog.psi.ch/elog/download.html, and then compile it. Clear now? Stefan             Re: Compile issues on Fedora withe current elog source, posted by Allen Tuttle on Thu Sep 13 06:12:59 2018  Latest compile effort on Fedora 28 using the bitbucket source downloaded at 21:12 PDT: make gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -c -o mxml.o mxml/mxml.c   Entry size too large for email notification, posted by Jacky Li on Tue May 19 12:27:01 2015  Hi, I am doing an inline image that is about 2.2 MB.  When I do a submit, I got the following message: Error sending Email via <i>"<email server>"</i>: Entry size too large for email notification.       Re: Entry size too large for email notification, posted by Andreas Luedeke on Tue May 19 16:34:20 2015  Hi Jacky, if I read the source code correctly then the maximum size of a base64 encoded email is hard coded to be 10 MB in elogd.h (recompile after changing it): #define MAX_CONTENT_LENGTH 10*1024*1024 But I think that an 2.2 MB image should easily fit into that. Andreas          Re: Entry size too large for email notification, posted by Lars Martin on Fri Jul 13 19:14:21 2018  Wouldn't it make sense for ELog (by default) to still notify, but not send the attachments by e-mail if the size limit is reached? Andreas Luedeke wrote: Hi Jacky, if I read the source code correctly             Re: Entry size too large for email notification, posted by Stefan Ritt on Mon Aug 27 13:07:28 2018  That's how it is implemented. If you use Max email attachment size = 1000000 then attachments below 1 MB are sent as attachments, and if the attachment is above 1 MB, then only a link to the attachment in the elog is sent.   Changing of entries after expired time restriction by synchronisation, posted by Gino Guenzburger on Thu Aug 16 13:33:39 2018  I'm working on setting up an elog as lab-journal in our group with the following set-up: The elog is running on a server, with no back-end access for the users. Multiple people will use it, all loging in with the same user-name and password. The entries submitted to the log-book can only be edited for 24hours, as defined by the "Restrict edit time=   Problem with eloglang.german_UTF8, posted by Andreas Luedeke on Tue Aug 7 10:53:45 2018  I had a problem with restarting ELOG since about a year, and finally I found the culprit. I just want to share it here, to prevent anyone else to make the same mistake, Apparently the files resources/eloglang.* are rather sensitive to the syntax. But it doesn't tell you: no warning or error message comes   edit templates from config page, posted by Stefano Lacaprara on Thu Jun 14 13:12:02 2018  Dear all,   I have some logbook which uses preset text depending on some option values, and uses text files for this.       Re: edit templates from config page, posted by Stefan Ritt on Thu Jun 14 13:20:26 2018  > Dear all, >   I have some logbook which uses preset text depending on some option values, and uses text files for this. >        Re: edit templates from config page, posted by Andreas Luedeke on Thu Jun 14 18:17:07 2018  > Dear all, >   I have some logbook which uses preset text depending on some option values, and uses text files for this. >           Re: edit templates from config page, posted by Stefan Ritt on Thu Jun 14 19:17:41 2018  As always, Andreas has clever ideas. Never thought about this possibility. Stefan   number of entries in Login user list, posted by Janusz Szuba on Wed Jun 13 18:08:06 2018  Hi,  could it be possible to increase the limit of entries in Login user list from 100 to somewhat reasonably higher? Like twice or 3 times as much. Similar limit exist also on Admin user list, which is afair 10, could this also be increased?       Re: number of entries in Login user list, posted by Andreas Luedeke on Thu Jun 14 12:37:22 2018  Hi Janusz, You can change the following line in elogd.h and recompile: #define MAX_N_LIST      100          Re: number of entries in Login user list, posted by Janusz Szuba on Thu Jun 14 13:07:32 2018  Thanks, good point, I was not sure that in case of other lists which will be changed as well, there will not be any problems, like overflow, etc.  Regarding admin list, now I remember, that was the limit to send email notification in case of registration requests. But actually it is not important right now.             Re: number of entries in Login user list, posted by Stefan Ritt on Thu Jun 14 13:17:33 2018  Well, many arrays based on MAX_N_LIST are created on the heap memory, and if you exceed that, elogd simply crashes. There are compile options to increase the stack and heap size, but that depends on the operating system and the compiler. The value of 100 has been proven to work everywhere. If you increase it, you're on your own.   html mode with preset text template cannot be read by newly updated MS-Edge browser, posted by utomoadji wisnubroto on Wed Jun 6 18:25:32 2018  i have elog tab configuration with preset text as follow : ===================================================================== [Shift Entry]   shiftcheck restrict edit, posted by Xuan Wu on Thu May 24 08:53:50 2018  Hi all, There are options "Restrict edit" and "Restrict edit time" for general logbooks, but it seems not work for shiftcheck logbook. I think the function only author can change their own entry is necessary for shiftcheck too. Any suggestion would be hightly appreciated.       Re: shiftcheck restrict edit, posted by Xuan Wu on Wed Jun 6 02:41:32 2018  Is there a way to restrict other author to edit the custom input form submitted? Xuan Wu wrote: Hi all,   text area height, posted by Giuseppe Cucinotta on Fri Jun 1 17:08:48 2018  Hi, I wonder if it is possible to set a minimum default value for the height of the text box when submitting new entries. If I understood well, by default the text box height automatically resizes in order that all the elements of the page are visible. Actually for our needs having a minimum       Re: text area height, posted by Stefan Ritt on Tue Jun 5 10:12:06 2018  Have you tried Message height = ... unit is number of text lines.          Re: text area height, posted by Giuseppe Cucinotta on Tue Jun 5 15:06:18 2018  I tried with Message Height = 100 inside the conifguration of my logbook, but nothing changed as you can see in the first picture... What I'm looking for is a way, if possible, to start by default with a wider message box, someting like fig2. For our purpose, using wide tables, it would be very useful to have a wider message box in order to have a full look to the message content, and also having it by default without             Re: text area height, posted by Stefan Ritt on Tue Jun 5 21:37:26 2018  The message height option only works if you select either "ELCode" or "plain" for encoding (this can also be made as default in the config file). For the HTML editor, the size is set internally and I don't have any influenc on it. Stefan   Enabling SSL, posted by Pasti on Fri May 18 08:04:37 2018  Hi all,  I'm following config guide and so far so good. The only issue I run into is when enabling SSL. Guide says - One can replace this certificate and key with a real certificate to avoid browser pop-up windows warning about the self-signed certificate.       Re: Enabling SSL, posted by Stefan Ritt on Tue Jun 5 12:28:27 2018  This comes from the openSSL library which elog includes. I tried myelf and found that a chained certificate is not correctly interpreted by the openSSL library. Most people anyhow don't use SSL inside elog, but run an Apache server in front of elog. This is anyhow better since Apache has an industry-strength security with regular updates. Much better than relying on OpenSSL.   Report Generating Tool?, posted by Hal Goldfarb on Mon May 21 09:41:57 2018  Has anyone developed a report tool for elog?  I would like to be able to sort certain items and send them to either a printer, or an email (external to my own use). If not, any ideas on an easy means of doing this?  I write a lot of Perl, so that would be an option for me if the text is easily obtained.       Re: Report Generating Tool?, posted by Stefan Ritt on Mon May 21 21:37:36 2018  Switch to the "summary" display (try it with this forum). You get headers (like "category"). Clicking on it sorts by that attribute. Then display "all" entries, or use the "find" option to search in certain time periods, then just print the web page. Alternatively, expeort logbook entries as CSV files, load them into a spreadsheet program, and do the sorting and printing there.          Re: Report Generating Tool?, posted by Hal Goldfarb on Tue May 22 06:55:21 2018  I don't see an "export" option in the documentation, only "import."  Printing the web page is probably not what I want. Stefan Ritt wrote: Switch to the "summary" display (try it with this forum).             Re: Report Generating Tool?, posted by Stefan Ritt on Tue May 22 11:11:43 2018  Click on "Find", select "Export to CSV", optionally select filter criteria, then press "Search". Stefan Hal          Re: Report Generating Tool?, posted by Andreas Luedeke on Wed May 23 16:19:48 2018  Here's a little example for a query for this logbook: curl -f -s -k "https://elog.psi.ch/elogs/Forum/?jcmd=Search&mode=CSV1&last=7&Category=^Question%24" You can easily process this output with perl, to create reports. I use it for example to create counts for specific enties, like "Bug reports" that   both "email <attribute> <value" and "email all" at the same time, posted by Stefano Lacaprara on Wed May 23 14:44:08 2018  Hi,    I have an elogbook which sends notifications to subscribers, plus, if the "Type" is "New Run", it sends the notification to a different mailing addeess and with a different subject (which need to be parsed by    elogd service crashes after windows update, posted by Tom Roberts on Fri May 18 00:57:33 2018  We have been using elog on Windows 10 for a long time. Today, after a Windows update, the elogd service started crashing (error 1067, unexpected termination). It ran fine just before the Windows update (which took > 1 hour, so it was a major one). Uninstalling and re-installing did not help, including replacing my elogd.cfg with the default. Installing on another PC (that also has this update) fails in the same way. I have a good backup of my logbook.   about shiftcheck, posted by Xuan Wu on Tue May 15 04:41:23 2018  Hi all, I try to implement a shift check list for our facility. The attributes called "a1, a2, b1, b2 etc" are used in original shiftcheck.html， However, we would like to use "1.1, 1.2, 2.1, 2.2 etc". So I try to change the name of checkbox in shiftcheck.html and the attributes in       Re: about shiftcheck, posted by Andreas Luedeke on Tue May 15 10:35:32 2018  An attribute is similar to a variable. Do you know any programming language that allows to start a variable with a digit? I don't. The solution is very obvious: start your attributes with a letter. Cheers, Andreas          Re: about shiftcheck, posted by Xuan Wu on Wed May 16 02:20:24 2018  That's true. Thanks for your explanation. Cheers, Xuan Andreas   Elog ID entry bug at >99999 entries, posted by Joseph McKenna on Fri May 4 14:43:35 2018  We have a possible bug with elog that the ID for an elog entry at over 99,999 entires reads as 10,000...  68792/1 Illistrates the problem, we use this ID often to cross reference from out datalog... Is this a know bug we can find a fix for? We are using:  elogd 2.9.2 built Jul 14 2015, 18:58:06 revision       Re: Elog ID entry bug at >99999 entries, posted by Andreas Luedeke on Fri May 4 16:05:32 2018  I am not sure I understand your bug report. I can easily create IDs greater than 100'000 (see attached picture), but that is not your problem, or is it? Cheers, Andreas          Re: Elog ID entry bug at >99999 entries, posted by Chris Rasmussen on Sat May 5 11:22:50 2018  Hi Andreas, I'm working on the same experiment as Joseph who submitted the bug report. You are right, IDs greater than 10^5 are created no problem. The issue is with the internal elog link, in this case of the form elog:SequencerEvents/XXXXX  The link generated uses only the first 5 digits of the message ID, and therefore links to the wrong message. In the two attachments you can see our sequencer             Re: Elog ID entry bug at >99999 entries, posted by Andreas Luedeke on Sat May 5 20:55:23 2018  Well, in my example the ID link worked just fine. There could be a string length limitation, but it could be as well the way you are creating the ID that is the source of the problem: I would need the part of your elogd.cfg that defines how you format your ID in order to try to reproduce your problem.                Re: Elog ID entry bug at >99999 entries, posted by Chris Rasmussen on Mon May 7 18:10:20 2018  ah yes, that was a helpful clue. Our elogd.cfg file led me to a .js file which redefines the ID to the elog:SequencerEvents/XXXXX format and it indeed had a silly hard coded length of that string. Since I am pretty sure this is our code, I think it is safe to say that this is not a bug in the elog                   Re: Elog ID entry bug at >99999 entries, posted by Joseph McKenna on Tue May 8 16:17:28 2018  Thank you all for your kind responses. Please consider this thread resolved: no bug in elog Chris Rasmussen wrote: ah yes, that was a helpful clue. Our elogd.cfg file led me to a             Re: Elog ID entry bug at >99999 entries, posted by Stefan Ritt on Mon May 7 14:24:18 2018  As Andreas said we have to reproduce the problem. What is special in your case is the elog:SequencerEvents/XXXXX. This is non-standard and must be created through your configuration of elog or by an external script. I just guess that you have something like Preset ID = elog:SequencerEvents/#####   Email Config, posted by Stefan Werler on Wed Apr 18 12:07:50 2018  Hi, I´m new in ELOG, Can u explain me how i config the Mailing?       Re: Email Config, posted by Stefan Ritt on Wed Apr 18 12:30:51 2018  SMTP host = ... as written in the documentation! Automatic email after expiration is not possible.          Re: Email Config, posted by Stefan Werler on Wed Apr 18 13:18:07 2018  many thanks Stefan Ritt wrote: SMTP host = ...       Re: Email Config, posted by Andreas Luedeke on Wed Apr 18 13:43:36 2018  SMTP host = ... MUST be set in the [global] section of your configuration - it will likely not work when you try to set it for a specific logbook. I don't see how ELOG can send an automatic email after a date expired.   problem with chkeditor, posted by Andrea Mazzolari on Wed Apr 4 19:56:48 2018  Hi All, I just installed elog latest version. I can see that my chkeditor (HTML encoding) is pretty simplified with respect to the version i can see there. Why this ? For example, it does not offer the possibility to upload images.       Re: problem with chkeditor, posted by Stefan Ritt on Wed Apr 11 11:55:47 2018  Can you post a picture here? Andrea Mazzolari wrote: Hi All,          Re: problem with chkeditor, posted by Andrea Mazzolari on Sat Apr 14 15:11:31 2018  If i try to upload an image here, i got the error "Image Source URL Is Missing"... can you help me further ? Best regards,             Re: problem with chkeditor, posted by Andreas Luedeke on Mon Apr 16 17:27:35 2018  Yes, I can help with that: you've tried to put the picture into the text body. Try to make it a normal attachment, that'll work always. Andrea Mazzolari wrote: If i try to upload an image here, i got the error "Image Source   "Slow script" problem posting/editing from Safari -- browser hangs, times out, posted by Michael Kelsey on Wed Apr 11 18:14:35 2018  Hello!  The CDMS collaboration is using e-Log as one of it's issue tracking systems.  In the last few months, I have noticed a problem when either creating or editing entries from my usual Safari browser (currently 11.1 on MacOSX 10.13.4):  The [Submit] button triggers a spinning beach ball, with no connection to our e-Log server, and after several minutes, Safari complains the the page had to be reloaded, discarding       Re: "Slow script" problem posting/editing from Safari -- browser hangs, times out, posted by Michael Hibbard on Thu Apr 12 14:13:18 2018  I dont' have a solution, but I just wanted to bring more attention to your post. I too am having the same issue with the ELOG system and the Safari browser. I have noticed that ELOG is most stabel and function on the client end from the IE browser. A few weeks ago I also had to switch from using ELOG on the client end from Safari to Firefox.          Re: "Slow script" problem posting/editing from Safari -- browser hangs, times out, posted by Stefan Ritt on Sat Apr 14 08:50:40 2018  I'm not 100% sure, but I believe it should work without the  while (in_asend); So can you please remove that line (it's in src/elogd.c) and recompile elogd and test it?             Re: "Slow script" problem posting/editing from Safari -- browser hangs, times out, posted by Michael Kelsey on Sun Apr 15 08:03:21 2018  Thank you for your suggestion, Stefan!  The sysadmin who handles our e-Log server implemented your suggestion earlier today (Saturday).  I have been able to successfully create and modify e-Log entries with Safari since then.  Since the "slow script" issue has been intermittent in the past, I plan to continue testing and monitoring for the next day or so.  Nevertheless, it appears that removing the waiting loop has alleviated                Re: "Slow script" problem posting/editing from Safari -- browser hangs, times out, posted by Stefan Ritt on Mon Apr 16 08:19:16 2018  Ok, I removed the code from the official code now.  A bit background: The "autosave" mechanism in elog saves regularly the current content in a "draft" message, so that the data does not get lost if the browser for example crashes. The saving is done asynchronously via some AJAX call. This call takes some time, since it's   "Drop attachments here..." only functional in IE, posted by Michael Hibbard on Thu Apr 5 06:00:09 2018  Hello, the "drop attachments here..." feature is very useful, especially when I have multiple files. I can drag them all over in one operation, however I have noticed that this feature only works well in the IE browser. It does not work reliably in Safari/Chrome/Firefox. I have tired in both 3.1.3 and 3.1.2. I also have the same symptom on the Demo log book of   Create past Elog entry., posted by Michael Hibbard on Mon Apr 2 23:31:51 2018  Hello, Sorry if this has been addressed elsewhere, but I could not find info. I am wanting to submit a new elog entry (that should have been) for a past date, to predate log entrys currently in my system. I assume I must manually create a new .log file. What ID# should I assign to this entry? Should I sub-increment (i.e 33.1)? I presume the       Re: Create past Elog entry., posted by David Pilgram on Tue Apr 3 09:39:07 2018  Hi Michael, Elog purists, look away now. There is an "official" way to do this, which is to have fields for entry date (so can be in the past), but the yymmdda.log file will          Re: Create past Elog entry., posted by Michael Hibbard on Tue Apr 3 22:34:49 2018  Thank you David, Andreas. Very useful forum. David Pilgram wrote: Hi Michael,       Re: Create past Elog entry., posted by Andreas Luedeke on Tue Apr 3 10:19:07 2018  David answered the question already. I would distinguish if this is a once-in-a-year event, where you are willing to edit the logfiles as an administrator to fix it - or if it happens more weekly, and you want to enable the users to fix it themself.   If it happens once a year and you don't   New elog setting for large attachments, posted by Stefan Ritt on Mon Mar 26 16:32:43 2018  Most mail delivery systems have a maximum size for attachments. In the past, if an elog attachment was larger than this size, the email server refused to accept this email and no notification is sent. Now one can specify the maximum allowed email attachment size with Max email attachment size = <n>   BSOD, posted by Ales Novak on Fri Feb 23 21:27:12 2018  Hi, I have been using elog for a few years and it is a wonderfull software and has been one that I can't go without. So thank you very much for making it.        Re: BSOD, posted by Stefan Ritt on Mon Mar 19 16:45:07 2018  The dump does not help me much. I need to reporduce the problem in a controlled environment. Stefan Ales   Problem with special character "&#269;", posted by Matej Sedej on Fri Feb 16 09:18:56 2018  Hello! First of all, thank you for this great piece of software! For now it seems to perfectly cover our need to log very basic events, there was a setting for everything we wanted to set.       Re: Problem with special character "&#269;", posted by Matej Sedej on Fri Feb 16 09:36:18 2018  I see the same problem exists on this board as well. Actuall it appears only the attribute fields are affected. The č character was incorrectly written to the log file from the subject field above, but correctly from the body text below. Matej          Re: Problem with special character "&#269;", posted by Stefan Ritt on Tue Mar 6 15:08:23 2018  Actually unicode characters are converted by your browser into HTML code (such as &#268) where 268 decimal = 10C hex. elog just writes to file what it gets from the browser. When an existing elog entry gets shown by the browser, the code is translated back to the character. Why do you care what is written to the log file? If you use scripts or so to parse your log files, you have to adapt them to correctly decode HTML encoded characters. This is             Re: Problem with special character "&#269;", posted by Matej Sedej on Tue Mar 6 15:29:38 2018  Hello Stefan, thank you for the reply. The explanation does not solve my problem though.  1) Could you elaborate, why the body text field CORRECTLY writes the character while the                Re: Problem with special character "&#269;", posted by Stefan Ritt on Tue Mar 6 15:54:23 2018  In the attribe filed, HTML code is not allowed for security reasons. If you want to bypass this (on your own risk), put allow html = 1 into your config file.                   Re: Problem with special character "&#269;", posted by Matej Sedej on Tue Mar 6 16:09:05 2018  This tag does not change the behaviour, but I have noticed that I only have the problem in Chrome and Firefox but not in Internet explorer. Matej Stefan                      Re: Problem with special character "&#269;", posted by Matej Sedej on Thu Mar 15 09:39:20 2018  To conclude this topic, we sadly can't use the characters č and Č propperly in the application. I have marked the problems in the screenshots below: red square - the user name is changed immediately after saving. It is also written into the log file in the                         Re: Problem with special character "&#269;", posted by Stefan Ritt on Fri Mar 16 12:46:09 2018  I had time to look at the problem in detail. I found that a &#xxx; sequence is not correctly identified as HTML code, and thus displayed in plain when used in an attribute. I fixed it in the current git revision and now it looks find in attribute (see attachment). Can you give it a try? Please note that you need "Allow HTML = 1" in your config file.                            Re: Problem with special character "&#269;", posted by Matej Sedej on Fri Mar 16 14:12:04 2018  Great news Stefan! Please pardon my ignorance, but I was not able to "make" it. I have no idea how to run this on Windows where the current POC log resides.                                 Re: Problem with special character "&#269;", posted by Stefan Ritt on Fri Mar 16 14:35:05 2018  Easiest is to install the Cywgin environment (www.cygwin.com) and there select the C compiler package which installs also "make". Matej Sedej wrote: Great news Stefan! Please pardon my ignorance, but I was not able                                  Re: Problem with special character "&#269;", posted by Matej Sedej on Fri Mar 16 15:39:17 2018  Phew, made it, sort of. Had to copy the contents of the mxml folder from an older version, the folder was empty in this git. I also had to change the SSL to 0 and then it compiled without errors plus I had to copy the cygwin1.dll to the folder to make the service run. So yes, I can confirm that manually inputting the Č in the attribute field now works correctly. Excellent! This solves the pink problem                                     Re: Problem with special character "&#269;", posted by Stefan Ritt on Fri Mar 16 17:51:30 2018  Pink problem: Yes the CSV export preserves the html tags, but what to do. CSV files are plain text with 8 bit characters. Unicode characgers have to be represented with more than one byte. So either HTML encoding or some special escape sequence encoding. If you like the second better than the first, I'm sure you find some conversion program on the internet.                                        Re: Problem with special character "&#269;", posted by Stefan Ritt on Fri Mar 16 18:08:10 2018  Special characters in use names should now work in the current version. Stefan Ritt wrote: Pink problem: Yes the CSV export preserves the html tags, but what to                                           Re: Problem with special character "&#269;", posted by Matej Sedej on Fri Mar 16 20:54:40 2018  That's great, Stefan, it works indeed. I tried fiddling around a bit with different charsets but haven't been succesful yet. I'll play around some more. Stefan   how to insert images inline, posted by Piotr Zolnierczuk on Tue Mar 6 16:59:29 2018  Hi, I recently upgraded elog from 2.7 to 3.1 and have a hard time to insert images inline. The attachements work just fine. I am certain it is something silly, but I cannot figure it out.       Re: how to insert images inline, posted by Stefan Ritt on Tue Mar 6 17:28:46 2018  Before you click OK on your point 4, click on "Send to Server". Stefan Piotr          Re: how to insert images inline, posted by Piotr Zolnierczuk on Tue Mar 6 17:49:49 2018  I did just that. The image was properly send to the server (it appears in the attachement list). However clicking OK still produces "Image source URL is missing". What is the URL that refers to an attachment? I've tried 68759/<1> and 68759/1 and even elog:1234/<1> (where             Re: how to insert images inline, posted by Piotr Zolnierczuk on Tue Mar 6 18:01:30 2018  Got it to work.  Removed "Preview attachments = 1" from the global section. Thanks for your help. Piotr   User passwords not configurable with loacl passwordfile, posted by KaterKarlo99 on Tue Feb 27 15:11:23 2018  Hi! Tryed windows an linux version. On booth the "Register new User" dialog is not displaying a password line. so what password is used for the new user? Further the user can't change his password, because he didn't know the old one.       Re: User passwords not configurable with loacl passwordfile, posted by Stefan Ritt on Tue Feb 27 15:32:30 2018  Have you configures user-level access via password file = anyfile.pwd Can your elogd server write to that file? If yes, can you please post your config file?          Re: User passwords not configurable with loacl passwordfile, posted by KaterKarlo98 on Wed Feb 28 11:38:23 2018  Hi Stefan, thanks for the quick reply. Yes, i've configured user-level access. Here is my cfg:             Re: User passwords not configurable with loacl passwordfile, posted by KaterKarlo99 on Mon Mar 5 14:10:52 2018  I'm afraid that there is something wrong because each user will be written with the same (hashed) password to the local password file, irrespective of the given password within the "new User dialog". So for instance, every user in my password file lokks like this:                Re: User passwords not configurable with loacl passwordfile, posted by Stefan Ritt on Mon Mar 5 14:29:26 2018  What happens when you don't use Kerberos authentication? KaterKarlo99 wrote: I'm afraid that there is something wrong because each user will be written                   Re: User passwords not configurable with loacl passwordfile, posted by KaterKarlo99 on Mon Mar 5 14:44:58 2018  Yeah!! That did it! I remove the line "Kerberos authentication" and now it works! Thanks!   Entries disappear after editing + UTF16 problem, posted by Peter K on Wed Jan 31 09:06:10 2018  I found a sequence which hides the message from the list. In addition this sequence corrupts UTF encoding of the text. create new message submit it Edit this message again click SAVE and then exit the editor (click Logbook       Re: Entries disappear after editing + UTF16 problem, posted by Stefan Ritt on Thu Feb 1 10:34:42 2018  The message is not lost, but becomes a "draft". This works similar in most email systems. When you edit an email and son't send it, it stays in your "draft" email folder and does not show up in your "sent" folder. Same here. You are suppost to "submit" you entry, the "save" is just a temporary safety backup. If you do not submit (if you press BACK or your browser crashes), the entry is not submitted          Re: Entries disappear after editing + UTF16 problem, posted by Peter K on Thu Feb 1 14:55:24 2018  Dear Stefan, Thanks for quick reply. I checked List drafts = 1 in config file - it does not show drafts in the list in my case.             Re: Entries disappear after editing + UTF16 problem, posted by Stefan Ritt on Fri Feb 2 08:31:35 2018  You might have to update to the current elog version. This feature was implemented in Dec. 2016.  Stefan Peter                Re: Entries disappear after editing + UTF16 problem, posted by Peter K on Tue Feb 6 10:15:29 2018  We installed our elog from .apk in November 2017. Version V3.1.2-bd75964 I suppose it already contains List drafts feature.                   Re: Entries disappear after editing + UTF16 problem, posted by Stefan Ritt on Tue Feb 6 10:23:26 2018  The -bd... number must be from the .apk package, which I don't have control over. You have to check the elog git hash code. You see it at the bottom of each elog web page. For this forum server, it's ELOG V3.1.2-7933898 with 7 digit number at the end.                      Re: Entries disappear after editing + UTF16 problem, posted by Peter K on Wed Feb 7 14:22:23 2018  yes, that is exactly where I got this V3.1.2-bd75964 version! Do you recommend to download it again from your site and compile? Stefan                         Re: Entries disappear after editing + UTF16 problem, posted by Stefan Ritt on Wed Feb 7 14:26:01 2018  Tell me your current seven digit number and I can check if your version is too old. Peter K wrote: yes, that is exactly where I got this V3.1.2-bd75964 version!                            Re: Entries disappear after editing + UTF16 problem, posted by Andreas Luedeke on Wed Feb 7 15:28:47 2018  Hi Stefan, I think there is a misunderstanding: there is an ELOG commit with the GIT ID bd75964. It is from Sep. 2016, so: Peter, you should download a newer version. Cheers Andreas https://bitbucket.org/ritt/elog/commits/all?search=bd75964 Stefan Ritt                               Re: Entries disappear after editing + UTF16 problem, posted by Peter K on Thu Feb 8 15:09:42 2018  Dear Stefan and Andreas, We have updated our elog to V3.1.3-7933898, now I see the drafts in the list!   v3.1.3 does not work with logbooks from v2.9.2?, posted by Yves on Thu Feb 1 03:12:03 2018  I have just upgraded elog from 2.9.2 -> 3.1.3. 3.1.3 runs fine with new logbooks. However, when trying to run 3.1.3 with my logbooks created with 2.9.2 things stop working. Here is the command I run for testing [attachment 1]: first of all it takes a very long time (~ 10 minutes) for it to index the logbooks. When       Re: v3.1.3 does not work with logbooks from v2.9.2?, posted by Andreas Luedeke on Thu Feb 1 10:14:55 2018  Hi Yves, just my two pence, maybe they help you to figure out what's going on: versions 2.* had all entries of one logbook in one directory. Version 3.* create a subdirectory for each year. This had been added for me: if you use AFS for logbook storage, then you have a limit on how many files you can put into a single directory. So the first time you start elogd 3.* with data from an elogd 2.* it should          Re: v3.1.3 does not work with logbooks from v2.9.2? - solved, posted by Yves on Fri Feb 2 00:02:54 2018  Hi Andreas, Thanks - you pointed me in the right direction. It appears that my logbooks were a combination of the two versions. I had all the year-directories (version 3) but also all the entry files in the main logbook directory. Seems version 2 does not care but version 3 does not like it. After carefully checking   Entries disappear after editing, posted by Peter K on Sat Jan 27 03:37:11 2018  Dear elog community, We have a problem with elog V3.1.2-bd75964. Sometimes entries disappear from the list after editing.       Re: Entries disappear after editing, posted by Stefan Ritt on Mon Jan 29 09:14:35 2018  Drafts are message which somebody started to edit, but did not complete, like leaving the page without saving. If you don't like this, you can set "save drafts = 0". The locking has a similar background. If you have locking on (vis "Use lock = 1"), then one person can "lock" a message,          Re: Entries disappear after editing, posted by Peter K on Tue Jan 30 14:26:24 2018  Thanks for fast response! I LIKE locking and saving drafts. The only problem is that the locked message disappeared from the list.             Re: Entries disappear after editing, posted by Stefan Ritt on Tue Jan 30 14:35:23 2018  I also experienced various sproradic issues with locking, so I usually keep it off. Stefan Peter   Is there a python3 api to generate logbook entries from python?, posted by markus on Tue Jan 16 09:30:55 2018  Dear elog community, I wonder whether there is a python3 api or lib to generate and append entries (and attachments) to the logbook using scripts. However, so far I did not find anything...       Re: Is there a python3 api to generate logbook entries from python?, posted by Stefan Ritt on Tue Jan 16 09:46:04 2018  There are two options Wrap the "elog" command line tool  Use "curl". Ther is a PycURL library http://pycurl.io/docs/latest/ which can be used, so you don't have to call any command line tool. The usage of curl is described in elog:68597 Stefan       Re: Is there a python3 api to generate logbook entries from python?, posted by Andreas Luedeke on Tue Jan 16 10:13:00 2018  Have a look here: https://github.com/paulscherrerinstitute/py_elog I haven't tried it myself, but it should allow you to add, reply, edit, delete elog entries from python (>= 3.5) via the http elog interface. It's an anaconda package.          Re: Is there a python3 api to generate logbook entries from python?, posted by markus on Wed Jan 24 07:54:47 2018  Thanks Andreas! This is more or less exactly what I was looking for... Regards   Adding New User Failed During Email Send, posted by Jason Moore on Wed Jan 17 18:11:49 2018  The following error occured during the addition of new user, first time this occured: "Cannot send email notification to "xxx@xxx.com" Sender address rejected: Domain not found Please use your browser's back button to go back       Re: Adding New User Failed During Email Send, posted by Stefan Ritt on Wed Jan 17 19:51:49 2018  This error comes from your email SMTP server, not from elog. It complains about the email address xxx@xxx.com which refers to a nonexisting domain. Just read the message. Stefan   Drop down order, posted by Alan Grant on Mon Jan 15 16:46:58 2018  Can you please make a change to have the Quick Filter ComboBox controls reference the field type for ordering purposes? For example, if attribute Lot Number is Type Numeric then the ComboBox should be listed in numerical order instead of alphanumeric (eg: 1,2,3,11,21 vs 1,11,2,21,3).   Unsafe browsing, posted by Tim Schelfhout on Mon Jan 15 15:56:07 2018  Hello there, Can anyone point out to me how I can avoid the unsafe browsing when accessing our local ELOG?   Browsing with chrome and always getting the unsafe browsing page. One has to go through the advanced       Re: Unsafe browsing, posted by Stefan Ritt on Mon Jan 15 16:27:19 2018  Safety is getting more and more an issue these days. Normal browsers don't accept self-signed certificates any more. One possibility is to get a certificate from https://letsencrypt.org/ Stefan   about attachment, posted by Xuan Wu on Fri Jan 12 09:54:41 2018  Hi all, Some elog users of our site(CSNS) mentioned some advice about attachment: 1.Can imagemagick create thumbnail for .bmp file now?   Tool Tips, posted by Grant Jeffcote on Sun Nov 26 22:15:34 2006  Hi Stefan, Is there a way to add a 'Tool Tips' to individual 'Options' similar to that currently available for Attributes? I have several checkboxes under an attribute       Re: Tool Tips, posted by Stefan Ritt on Tue Nov 28 10:20:12 2006  [quote="Grant Jeffcote"]Hi Stefan, Is there a way to add a 'Tool Tips' to individual 'Options' similar to that currently available for Attributes? I have several checkboxes under an attribute          Re: Tool Tips, posted by Grant Jeffcote on Tue Nov 28 10:25:08 2006  [quote="Stefan Ritt"][quote="Grant Jeffcote"]Hi Stefan, Is there a way to add a 'Tool Tips' to individual 'Options' similar to that currently available for Attributes? I have several checkboxes under an attribute             Re: Tool Tips, posted by Stefan Ritt on Tue Nov 28 10:26:33 2006  [quote="Grant Jeffcote"]What will the configuration line be?[/quote] If you have                Re: Tool Tips, posted by Grant Jeffcote on Tue Nov 28 22:12:13 2006  [quote="Stefan Ritt"][quote="Grant Jeffcote"]What will the configuration line be?[/quote] If you have                   Re: Tool Tips, posted by Stefan Ritt on Wed Nov 29 13:42:14 2006  [quote="Grant Jeffcote"][quote="Stefan Ritt"][quote="Grant Jeffcote"]What will the configuration line be?[/quote] If you have                      Re: Tool Tips, posted by Grant Jeffcote on Wed Nov 29 22:44:15 2006  [quote="Stefan Ritt"][quote="Grant Jeffcote"][quote="Stefan Ritt"][quote="Grant Jeffcote"]What will the configuration line be?[/quote] If you have                         Re: Tool Tips, posted by Stefan Ritt on Thu Nov 30 20:49:56 2006  [quote="Grant Jeffcote"]Thanks, we use Internet Explorer in service but I tested using Mozilla (hence above). I'd really like to be able change the limit to more than 256 characters, is this simply a configuration parameter or a code change? [/quote]                            Re: Tool Tips, posted by Grant Jeffcote on Thu Nov 30 22:07:31 2006  [quote="Stefan Ritt"][quote="Grant Jeffcote"]Thanks, we use Internet Explorer in service but I tested using Mozilla (hence above). I'd really like to be able change the limit to more than 256 characters, is this simply a configuration parameter or a code change? [/quote]                      Re: Tool Tips, posted by Grant Jeffcote on Tue Feb 6 18:04:54 2007  [quote="Stefan Ritt"][quote="Grant Jeffcote"][quote="Stefan Ritt"][quote="Grant Jeffcote"]What will the configuration line be?[/quote] If you have                         Re: Tool Tips, posted by Stefan Ritt on Tue Feb 6 19:56:05 2007  [quote="Grant Jeffcote"]I can't seem to get the Tooltips to show up using the 'ROptions' (radio buttons) though? Could you check if it is available for this please?[/quote]                            Re: Tool Tips, posted by Grant Jeffcote on Tue Feb 6 21:46:59 2007  [quote="Stefan Ritt"][quote="Grant Jeffcote"]I can't seem to get the Tooltips to show up using the 'ROptions' (radio buttons) though? Could you check if it is available for this please?[/quote]                            Re: Tool Tips, posted by Grant Jeffcote on Thu Nov 23 12:51:51 2017  Stefan, I know this request was a long time ago on an older version of E-Log (which we are still using) but can you tell me if Tooltips on Radio Buttons was ever implemented, it's not working on our version (2.92.2)? Working as it should on MOptions?                               Re: Tool Tips, posted by Stefan Ritt on Mon Dec 11 13:20:49 2017  Tooltips on 'ROptions' work since 2007, but your version 2.9.2 is pre-2007, so you should consider to upgrade. Stefan   hosts allow, posted by Susan James on Fri Nov 17 18:58:52 2017  I'm trying to wrap our elog instance to our company domain which is lbl.gov I add this entry below (without quotes) to elogd.cfg and it's not working.  the world can see our logbooks " Hosts Allow = *.lbl.gov ".       Re: hosts allow, posted by Andreas Luedeke on Sat Nov 18 19:36:57 2017  Hi Susan, according to the documentation you need to add "Hosts deny = All" in addition to the "Hosts allow" command. Here is the relevant excerpt from the documentation (https://midas.psi.ch/elog/config.html#access). Cheers Andreas Hosts          Re: hosts allow, posted by Susan James on Tue Nov 21 01:27:06 2017  thanks for your quick reply. the configuration is still not working.  See my entry below which denies everyone. I've tried many different combinations of 'hosts allow and hosts deny'             Re: hosts allow, posted by Susan James on Thu Dec 7 21:54:58 2017  Hi All, We're still having trouble with hosts.allow and hosts.deny. We're trying to allow all of our domain  lbl.gov to the access list                Re: hosts allow, posted by Andreas Luedeke on Fri Dec 8 19:47:04 2017  Hi Susan, the documentation states that you should start elogd with the -v option from the command line and look at the output. Did you try this? You might post the output here to get further help. Cheers Andreas Susan James wrote:                   Re: hosts allow, posted by Stefan Ritt on Mon Dec 11 13:16:32 2017  Have you set Resolve host names = 1 in the config file? If it still does not work, run "elogd -v" from the terminal and watch the output. You should see someting like:   possible DOS vulnerability with negative Content-Length field, posted by Christian Herzog on Tue Dec 5 15:30:43 2017  Hi,   a routine scan revealed a possible DOS attack vector: sending an invalid POST HTTP request with a negative Content-Length field crashes our elog       Re: possible DOS vulnerability with negative Content-Length field, posted by Stefan Ritt on Wed Dec 6 13:34:56 2017  I have fixed this issue in the current develop branch of elog. Stefan Christian   Config: conditional coloring of items when 2 conditions are met (and|or), posted by Tim Schelfhout on Fri Nov 24 08:54:38 2017  Hello, Trying to color an entry log when 2 conditions are met. Tried  Style Result Hired and Administration NOK = background-color:red       Re: Config: conditional coloring of items when 2 conditions are met (and|or), posted by Andreas Luedeke on Mon Nov 27 22:10:22 2017  I am not aware that it is forseen to define logical operators in combination with the Style command. How did you get the idea that this should work? But you should be able to define multiple Style commands, acting on different format parameter. Tim   Windows 10, posted by Michael Cianci on Fri Nov 24 17:29:49 2017  Sorry to bother you with such a simple question, but I am not an IT professional. We just received word that our IT department has plans to update our system to Windows 10 in 2018. Was wondering if our current version of ELOG was compatable with Windows 10? Thank You Very Much For Your Help.   drop-down list not working, posted by Sara Vanini on Mon Nov 13 12:58:41 2017  Hi, after ubuntu 16 system upgrade, elog version (3.1.1-1-1) on firefox version 56.0+build6-0ubuntu0.16.04.2 , the drop-down menus (Styles, Font, Size, etc) don't work anymore.   Attribute option "+x" not searcheable, posted by Stefano Lacaprara on Mon Oct 23 11:47:50 2017  Dear experts,    I have an elog with an attribute with fixed values, like this:       Re: Attribute option "+x" not searcheable, posted by Andreas Luedeke on Sat Oct 28 09:12:32 2017  Hi Stefano, you could try to html encode the "+" and "-" sign in the option list Options Half = +x, -x, both          Re: Attribute option "+x" not searcheable, posted by Andreas Luedeke on Tue Oct 31 16:56:24 2017  Hi Stefano, I've tested it: it does not work. Neither in edit nor in list view the HTML encoded characters show correctly.   Date must be between 1970 and 2037??, posted by Tim Schelfhout on Wed Oct 11 15:55:02 2017   Hey there, Trying to record birthdates in ELOG ... field type being date results in error: Date must be between 1970 and 2037 Can   Format Form, posted by Tim Schelfhout on Mon Oct 2 12:55:18 2017  Hello there, I am trying to format my entry form a little bit more practical and readable. I am struggling with the following: Numbers should be standard fields of 3 characters and can only be 3 characters wide (doing this by Format Leeftijd=1, css, 3,       Re: Format Form, posted by Stefan Ritt on Mon Oct 2 14:58:32 2017  The way and entry form can be customized is kind of limited in elog. You can use "format <attribute> = ..." to request a certain width, number of allowed characters and special CSS class (which of course you have to define). If you want a complete custom entry form, have a look here: elog:66909 . This requires however writing your own HTML, CSS and JavaScript.          Re: Format Form, posted by Tim Schelfhout on Mon Oct 2 15:20:04 2017  Thankx 4 the quick reply Stefan.  The link you provided does  not work .... could you point me again in the  right direction?  Where can I find more info on this ability? Thankx             Re: Format Form, posted by Stefan Ritt on Mon Oct 2 15:53:39 2017  The link does now work in the email, but if you go to the web interface of the forum it does work. Anyhow, you can go directly to https://midas.psi.ch/elogs/Forum/66909 Stefan   Email fields - accept semicolons too, posted by Ben Shepherd on Wed Sep 20 16:34:18 2017  My elog has a field for entering a list of email addresses, which goes into the "Email All" attribute. They need to be comma-separated, and an error is thrown if semicolons are used instead. Would it be possible to automatically change semicolons into commas before attempting to send the mail via SMTP? Neither character is allowed in email addresses so it shouldn't break anything to just do that silently. Thanks!   Elog System Requirements, posted by Alan Grant on Fri Sep 15 00:56:38 2017  In response to an elog-hang issue I've been having on the Windows platform, I am building a new Unbuntu 14 TLS VM machine to host the identical configuration so that I can more easily debug when the hang happens again. I don't mind beefing up the hardware resources to either eliminiate that as a factor or resolve the problem. I'll have a higher end CPU to deal with 20 to 50 clients doing searches through the data (since the elog configuration       Re: Elog System Requirements, posted by Andreas Luedeke on Fri Sep 15 15:16:42 2017  Hi Alan, we run our ELOG server (38 GB Logbook data in about 50 logbooks dating back up to 16 years) on a virtual Linux box. The memory is important, since ELOG scans through all entries and creates an index at start-up. But we have only about 6% used out of 2GB: ELOG is not very demanding.   javascript?, posted by Tim Schelfhout on Mon Sep 4 11:56:47 2017  Is there anyone out there who can help me get started using javascript in elog ?  Is there an example somewhere ... i suppose you put the code in the scripts folder?       Re: javascript?, posted by Andreas Luedeke on Mon Sep 4 13:19:33 2017  This logbook, the forum, provides some javascript code. The code is simply referenced in the footer (Bottom text = <file> | <string>). <link rel="stylesheet" href="//cdnjs.cloudflare.com/ajax/libs/highlight.js/9.6.0/styles/default.min.css"><script src="//cdnjs.cloudflare.com/ajax/libs/highlight.js/9.6.0/highlight.min.js"></script><script>hljs.initHighlightingOnLoad();</script> There's   edit elog config via elog web interface, posted by Tim Schelfhout on Mon Sep 4 11:22:05 2017  Hello, Is it possible to edit the entire elog config file via the elog frontend?  I see the config button  on some screens but it only allows me to change user and password??       Re: edit elog config via elog web interface, posted by Andreas Luedeke on Mon Sep 4 13:08:35 2017  On the right side of "Change password" you should find "Change config file". But you'll only see this, if the user has admin priviledges defined in the config file: "Admin user = <user>"   Problems with german_UTF8 language, posted by Andreas Luedeke on Mon Aug 21 11:22:09 2017  Hi Stefan, since recently (a few weeks) ELOG confuses the language translations. Individual language strings are translated into garbage; most other strings are fine. Currently I see the string "please select" translated into "ressed" (see attached picture),       Re: Problems with german_UTF8 language, posted by Andreas Luedeke on Wed Aug 23 15:11:32 2017  Just an update: I've re-compiled, reinstalled and restarted elogd for other reasons and now the corrupted strings are all gone. Everthing looks fine now. But I never worry when a problem goes away before I could understand it: I'm confident that I will have plenty of time later, when the problem   HTML in attribute values, posted by Richard Stamper on Tue Aug 22 14:19:43 2017  When one has "Allow HTML = 1" to permit HTML in attribute values, is it only a subset of HTML that is rendered? I find that <br> and <a href="..."> tags are properly rendered, for example, but lists with <ol> and <ul> are not.       Re: HTML in attribute values, posted by Stefan Ritt on Tue Aug 22 14:26:42 2017  As you can see... <UL> is possible Richard Stamper wrote: When one has "Allow HTML = 1" to permit HTML in attribute values, is it only a subset of HTML that is rendered?          Re: HTML in attribute values, posted by Richard Stamper on Tue Aug 22 14:36:46 2017  Isn't that list in the message text rather than as an attribute value? Stefan Ritt wrote: As you can see... <UL> is possible             Re: HTML in attribute values, posted by Stefan Ritt on Tue Aug 22 14:37:44 2017  Sorry, I misread your question. Only following HTML tags are allowed in attributes: <a> <img>                Re: HTML in attribute values, posted by Richard Stamper on Tue Aug 22 14:58:09 2017  Exactly the information I was after - thanks!  I'll simulate fancier markup as necessary. Stefan Ritt wrote: Sorry, I misread your question. Only following HTML tags are allowed   Bug with Drafts and Language German, posted by Andreas Luedeke on Mon Aug 21 11:45:06 2017  Hi Stefan, when one creates a new entry, and a draft entry exists for the logbook, then a menu appears (see attachment). If one select "Neuen Eintrag anlegen" then it should ignore the draft and create a new entry. This feat is done by adding a "&ignore=1" to       Re: Bug with Drafts and Language German, posted by Andreas Luedeke on Mon Aug 21 12:16:05 2017  I've quickly checked: there are a couple more commands in the source code that are not language encoded. I guess some of them needs correction. > egrep -n "cmd=[A-Za-z]" elogd.c 10293:   rsprintf("    r.open('GET', '?jcmd=Unlock&edit_id=%d', true);\n", message_id);   Sharing logbooks among "Top Groups", posted by Satyajit Jena on Sun Aug 20 10:07:57 2017  Hi, I am currently trying to configuring elog top groups, which are supposed to separate from each other. However, I would like to have a common logbook that should be visible in each group. Is there a way to share logbooks among Top Groups for example       Re: Sharing logbooks among "Top Groups", posted by Andreas Luedeke on Sun Aug 20 14:55:18 2017  I don't know if that works. Why don't you just try? Satyajit Jena wrote: Hi,          Re: Sharing logbooks among "Top Groups", posted by Satyajit Jena on Sun Aug 20 16:21:59 2017  Hi, I tried without success. Logbook is not sharing, it is displaying only under one "Top Group" whereever it appears first. With regards,             Re: Sharing logbooks among "Top Groups", posted by Andreas Luedeke on Mon Aug 21 08:51:09 2017  Hi Satyajit, I think you've just answered your own question. There is no magic switch - as far as I know - that would change that behaviour. Probably there are ways to achieve your desired behaviour (using mirror servers and synchronising the logbooks) but that would require a large effort and would make your installation a lot more complicated.   elogd hangs, posted by Alan Grant on Fri Aug 18 05:28:16 2017  I have a very long standing problem with elog over the last few versions where almost daily the service will hang. Cannot even Restart elogd, that just hangs. Clients experience Page not Found. I can only get the service reinitialized by rebooting the VM machine. I have Elog verbose logging On plus a number of external triage monitors running but nothing is yielding clues beyond the precise time the hang occurs. Aside from providing the       Re: elogd hangs, posted by Stefan Ritt on Fri Aug 18 08:59:08 2017  I have to figure out where elog hangs. I guess it must be some kind of endless loop, triggered by some corrupt data in one of the elog entries. Under linux this is fairly simple (just run elogd under the gdb debugger, wait until it hangs, then press ctrl-c and enter "where" to see a full stack dump where elogd is currently executing). Under Windows this is more difficult, since you need Visual C++ from Microsoft to do the debugging. One thing          Re: elogd hangs, posted by David Pilgram on Fri Aug 18 12:40:21 2017  I have experience of elog hanging (under linux).  I'll describe my situation, although it may not apply to you.  I still use elog 2.9.2 but I am unaware of this issue ever being resolved although I have mentioned it in the past.  (Possibly because I'm one of the few who has this situation).  I certainly recall other person had this as the problem, and my reply on this forum solved their problem.  The cause is the following:             Re: elogd hangs, posted by Alan Grant on Fri Aug 18 15:10:15 2017  Yes I think I recall the incident in the Forum you're talking about from previous searches I've done on hanging however so far I haven't used Reply To's in this elog instance. Nevertheless, you explained it very well and it's good points to keep in mind should I ever use them, thank you David.             Re: elogd hangs, posted by Alan Grant on Fri Aug 18 15:15:57 2017  Yes I think I recall the incident in the Forum you're talking about from previous searches I've done on hanging however so far I haven't used Reply To's in this elog instance. Nevertheless, you explained it very well and it's good points to keep in mind should I ever use them, thank you David.                Re: elogd hangs, posted by David Pilgram on Fri Aug 18 21:16:12 2017  Hi Alan, Just to be clear (and for others) if any entry is a reply to a previous one, such as this one is to yours, then there will be "Reply to" and "In reply to" fields in the entry as found in the yymmdda.log files.  They are automatically generated as part of the elog program's          Re: elogd hangs, posted by Alan Grant on Fri Aug 18 14:49:42 2017  I could begin debugging with C++. In the interim, if you think it will help, I can also provide you with my Config and log files, and the section of redacted data encompassing the time of the hang - just let me know. Regarding CPU usage, I have noted that in the past and have never seen very high CPU usage during an Elog hang. The VM itself remains responsive.             Re: elogd hangs, posted by Stefan Ritt on Fri Aug 18 16:26:14 2017  Well, having the config and data files only help if I can reproduce the hanging. If if you give me your files and a step-by-step instruction on how to reproduce the hanging, I can give it a try. But if it happens randomly after a while, it will be very hard for me to reproduce and fix it without the exaclty same user access pattern which of course I don't have.                Re: elogd hangs, posted by Alan Grant on Fri Aug 18 16:39:21 2017  Okay I will just try the debugger approach first and then take it from there. Thanks Stefan. Stefan Ritt wrote: Well, having the config and data   Enable LDAP on Windows, posted by Gerardo Abihaggle on Sun Jul 30 07:39:23 2017  Hi All, I'm running ELOG on a Windows machine and I would like to use LDAP for Authentication, however to achive this I need to compile elog. Any advice on how to do that on Windows?   Conditional attribute activation, posted by Devrim Esenturk on Fri Jul 21 15:24:33 2017  I have a stock database running latest elog version on windows. I am reserving some products which not been sent to customer mistakenly and using value "reserved" for it. But I need another attribute for comment reason of reserving but this attribute must be activated when reserved value selected. Is this possible? I didn't see any option for this at admin guide.       Re: Conditional attribute activation, posted by Andreas Luedeke on Mon Jul 24 14:33:51 2017  Yes, this is possible by using "Conditional Attributes". Have a look at the ELOG syntax help: https://midas.psi.ch/elog/config.html#conditional To hide attributes on edit, you can use "Show Attributes Edit =  ..." for the conditions; and you only list the comment reason for the case where the value of the other attribute has the value "reserved".   Password Protect Delete, posted by Michael Cianci on Thu Jul 20 18:38:20 2017  We don't use a password file but would like to password protect (Admin only) the DELETE function in the MENU     Thank You       Re: Password Protect Delete, posted by Andreas Luedeke on Fri Jul 21 08:54:03 2017  You can allow guests to create entries, but only registered users (Admins) to delete (or edit) entries: Menu commands = List, New, Edit, Reply, Delete, Find, Config, Logout, Help   Email Notification (Not) Initiated by elog Client Utility, posted by Phil Rubin on Fri Jul 14 19:26:06 2017  Our configuration sends out e-mail notifications based on a hierarchy of attributes, and works fine with WEB submissions, but not with client utility submissions (no notifications are sent; the log doesn't show it even trying to send any: 14-Jul-2017 18:36:01 [rubinp@nn.nn.nn.nn] {Notebook} NEW entry #0) .  Since notification is the default (suppression requires -x), I presume there is something wrong with the way we're going about       Re: Email Notification (Not) Initiated by elog Client Utility, posted by Andreas Luedeke on Wed Jul 19 08:50:16 2017  Yes, parentheses in field content might be difficult to pass from a shell command. You did not even mention which Linux shell you are using and you did not show the actual elog command. Maybe you want to add that information? Phil          Re: Email Notification (Not) Initiated by elog Client Utility, posted by Phil Rubin on Wed Jul 19 08:59:52 2017  Thank you for responding. I thought I provided the command at the end of the note: /usr/local/bin/elog -h host -p port -l Notebook -u user passwd -a Author="Author" -a Type=Type -a Category=Category -a Subject="subject"             Re: Email Notification (Not) Initiated by elog Client Utility, posted by Andreas Luedeke on Wed Jul 19 10:14:44 2017  If that is your command then it is obvious why no email is send: you do set "Type=Type", but only for "Type=Problem(s)" and "Category=TDAQ" you would send an email. Instead of writing "-h host" you should as well define the actual hostname, like "-h midas.psi.ch", likewise for all other                Re: Email Notification (Not) Initiated by elog Client Utility, posted by Phil Rubin on Wed Jul 19 10:25:08 2017  I didn't realize you required every detail of the command, since the entry is being logged, but here is an example (only the user information is blanked out): /usr/local/bin/elog -h vmna62s1 -p 8080 -l NA62Logbook -u xxxx xxxx -a Author=Rubin -a Type=Problem\(s\) -a Category=Elog -a Subject="Client                   Re: Email Notification (Not) Initiated by elog Client Utility, posted by Andreas Luedeke on Wed Jul 19 13:37:33 2017  Okay, I can confirm that this does not work. It is likely related to the disclaimer in the ELOG documentation (https://midas.psi.ch/elog/config.html#conditional) Conditional attributes are usually only used for change items in the entry form. I guess that the "Email" command never worked with conditional attributes. I use the "Email" command and conditional attributes   Weird behaviour of category filter, posted by Daniel Sajdyk on Fri Jul 14 13:18:30 2017  Hello. Today I noticed that when I use category filter in the top, right of Elog I got different results, that depends on that if I select Category and Subcategory or just Subcategory option.       Re: Weird behaviour of category filter, posted by Andreas Luedeke on Wed Jul 19 08:58:51 2017  Hi Daniel, I agree: it should. And it does in my case; it works perfectly fine for my logbooks. Maybe you should have a closer look for special characters in you configuration? Otherwise I don't know why it does not work for you.   Virus in latest elog?, posted by Daniel Sajdyk on Fri Jul 14 13:11:48 2017  Hello. Today I wanted to download latest elog version, and got information from Eset Endpoint Antyvirus, that downloaded file has trojan horse "Generic.GQWFFXB". It this false positive alarm?       Re: Virus in latest elog?, posted by Stefan Ritt on Fri Jul 14 16:58:48 2017  Hi Daniel, you're the first one reporting about this virus. We have different virus checkers here at our lab and none of them triggered. So I guess it is a false alarm.   Server dropping SSL connection while uploading large files, posted by Erkcan Ozcan on Sat Jun 10 07:05:24 2017  Hi, I am having trouble with uploading large (>0.5MB) files to elog. We click on upload and in a couple of seconds, the webbrowser complains that the server has dropped the connection.       Re: Server dropping SSL connection while uploading large files, posted by Erkcan Ozcan on Wed Jun 28 19:37:10 2017  Hi, Could someone at least suggest how I could debug this problem myself? If I know where to start, perhaps I can fix it myself and contribute to the software.          Re: Server dropping SSL connection while uploading large files, posted by Andreas Warburton on Wed Jun 28 22:20:38 2017  Hi Erkcan, I observed similar behaviours when attempting to do SSL uploads and mirroring over a WAN (see some of my recent posts).  Having not received any responses/help, and no time to try debugging the source myself, I've changed the way I use ELOG such that my attachment uploads are always local          Re: Server dropping SSL connection while uploading large files, posted by Stefan Ritt on Thu Jun 29 08:36:03 2017  One possibility is to run elog in non-SSL mode and put an Apache server in front of it. The Apache server can then do the SSL communication, and forward all requests to elog in plain text (non-SSL). This has been proven to work with large attachments, actually that's the way I use it. I didn't find time to debug the SSL problem. If anybody is interested in doing so, the relevant code is in function server_loop() around   my elogd crashes when editing the configuration, posted by Niklas Hoglund on Tue Jun 20 14:32:29 2017  Hi,  my elogd crashes sometimes when I click on the "Change config" button. What info should I collect more than below/attached?   Is it possible to generate a table of contents based on h1/h2/h3 HTML tags?, posted by Niklas Hoglund on Mon Jun 19 07:48:49 2017  Is it possible to generate a table of contents based on h1/h2/h3 HTML tags? Example: toc() < h1>test < h2>test1 < h1>test2 < h2>test3 < h1>test4       Re: Is it possible to generate a table of contents based on h1/h2/h3 HTML tags?, posted by Stefan Ritt on Mon Jun 19 08:33:07 2017  This is not possible. Stefan Niklas   Use X-Forwarded-User as preset in author field, posted by Stefano Lacaprara on Tue May 16 10:21:18 2017  Hi,   I have an elog server which uses apache/ldap for authentication. I would like to have the username used for ldap to be set automatically as author field in the elog.       Re: Use X-Forwarded-User as preset in author field, posted by Christof Hanke on Wed May 17 08:42:17 2017  > Hi, >   I have an elog server which uses apache/ldap for authentication. > I would like to have the username used for ldap to be set automatically as author field in the elog.          Re: Use X-Forwarded-User as preset in author field, posted by Stefano Lacaprara on Thu May 18 09:39:16 2017  > I use an older version of elog, but >   > Preset Author = $short_name <$long_name>             Re: Use X-Forwarded-User as preset in author field, posted by Christof Hanke on Thu May 18 10:37:16 2017  > > I use an older version of elog, but > >   > > Preset Author = $short_name <$long_name>                Re: Use X-Forwarded-User as preset in author field, posted by Christof Hanke on Thu May 18 10:51:05 2017  > > > I use an older version of elog, but > > >   > > > Preset Author = $short_name <$long_name>                   [solved] Re: Use X-Forwarded-User as preset in author field, posted by Stefano Lacaprara on Thu May 18 16:55:42 2017  >  > Sorry, I just double-checked, this userdatabase, I was talking about is the Password-file...   Limiting search data, posted by Alan Grant on Thu Apr 27 22:21:03 2017  I'm aware there is the "Show Last Default" setting for the Find page but is there (or can there PLEASE be) a similar setting for the Period filter on the List page? Our users routinely use the Quick Filters instead and it bogs down the system because we have lots of logbooks. Many thanks.       Re: Limiting search data, posted by Stefan Ritt on Fri Apr 28 08:15:56 2017  I don't get your point. If you go on the list page of this forum, you see -- all entries -- in the period quick filter, but you only see one page of entries, which is rather quick. This can be changed wiht "Entries per page", which defaults to 20. Do you have a different set-up? Alan          Re: Limiting search data, posted by Andreas Luedeke on Fri Apr 28 11:59:30 2017  I think I understand the question (although I have no answer): When someone uses the "Find" page search, then there is an option to limit the search to e.g. the last year. If you search for a non existing string, it'll only search entries from the past year.             Re: Limiting search data, posted by Stefan Ritt on Fri Apr 28 12:33:55 2017  Ok, got it. Will put it on the to-do list. Andreas Luedeke wrote: I think I understand the question (although I have no answer):   Elog crashes with null Username, posted by Alan Grant on Sun Dec 18 08:51:47 2016  I haven't found any reporterd issues in the forum similar yet, but it appears there is a bug in Elog when logging into logbooks. If I leave Username and Password null and click Submit the daemon crashes. We've been having this problem off and on and after some verbose logging level 3 I was drawn to these recurring lines in the log:       Re: Elog crashes with null Username, posted by Stefan Ritt on Mon Dec 19 12:28:47 2016  Ups. This bug must have lingered there since the beginning of time. Funny that nobody noticed in the last ten years or so. I have fixed it in the current git revision. Alan          Re: Elog crashes with null Username, posted by Alan Grant on Mon Dec 19 19:42:05 2016  Thanks for the speedy fix. FYI, our other Elog instances which are running ealrier versions do not exhibit this problem, as I confirmed that entering null ID/password returns "Invalid Username or password" as expected. This may be why it wasn't mentioned by anyone else before. Maybe something          Re: Elog crashes with null Username, posted by Xuan Wu on Fri Apr 21 02:21:59 2017  We also meet this issue occasionally, so how can we get rid of this? Stefan Ritt wrote: Ups. This bug must have lingered there since the beginning of time.             Re: Elog crashes with null Username, posted by Alan Grant on Fri Apr 21 05:27:35 2017  Are you using the current git revision Xuan? Xuan Wu wrote: We also meet this issue occasionally,                Re: Elog crashes with null Username, posted by Xuan Wu on Fri Apr 21 08:19:05 2017  No, We are using the released version 3.1.2 How to use the current git revision or is it a long time to wait for the next release? Alan                   Re: Elog crashes with null Username, posted by Stefan Ritt on Fri Apr 21 10:57:07 2017  I made a new release for you 3.1.3 Xuan Wu wrote: No, We are using the released version 3.1.2                      Re: Elog crashes with null Username, posted by Xuan Wu on Fri Apr 21 12:18:57 2017  Awesome！It's appreciated. Many Thanks! Stefan Ritt wrote: I made a new release for you 3.1.3   Full anonymous access, posted by K on Thu Apr 20 12:45:11 2017  How can i configure eLog to be used completely anonymous without the need to log in? I tried menu and guest menu settings without luck. I do not use password files. With earlier versions this was easy to set up...         Re: Full anonymous access, posted by Stefan Ritt on Thu Apr 20 12:59:24 2017  Sure. Just remove "Password file = ..." and any guest menu. Stefan K          Re: Full anonymous access, posted by K on Thu Apr 20 13:35:53 2017  Does not work. Clean install (debian 8 x64, with aptitude), only thing i've changed in the config is "URL"-parameter (global section) and redirection with Apache. No luck. Edit or delete gives an error "Error: Command "Delete" not allowed", "New"             Re: Full anonymous access, posted by Stefan Ritt on Thu Apr 20 13:45:42 2017  Version 2.9.2 is hopelessly outdated. Please upgrade to the current version on bitbucket. You also might have to delete any cookie in the browser sent to the elog server. K                Re: Full anonymous access, posted by K on Thu Apr 20 13:48:43 2017  OK, i will try that. Thanks. Stefan Ritt wrote: Version 2.9.2 is hopelessly outdated. Please upgrade to the current   rename menu commands , posted by Francois Cloutier on Tue Apr 11 17:24:48 2017  Hi ! I do have an setup were I would like to rename the menu command but keeping their fonction. Namely, I would like to rename the "copy to" button to "Duplicate" since thats the option I would like to put in place ( Copy to = Same logbook only).       Re: rename menu commands , posted by David Pilgram on Tue Apr 11 18:05:15 2017  Hi, First up, the Copy command is supposed to be used to copy to another log book, as it says in the documentation, not a duplicate entry in the same logbook.  I've tried doing a copy into the same logbook, it appears to work (although I don't know about every circumstance, I just did       Re: rename menu commands , posted by Andreas Luedeke on Tue Apr 11 22:44:40 2017  Hm, maybe my question is silly, but why don't you just use the "Duplicate" command instead of renaming and misusing "Copy to"?? Here is the relevant excerpt from the documentation (https://midas.psi.ch/elog/config.html#general): Menu commands = <list>          Re: rename menu commands , posted by Francois Cloutier on Wed Apr 12 13:52:34 2017  Somehow, I've missed to see that option :) Thanks :) Andreas             Re: rename menu commands , posted by David Pilgram on Wed Apr 12 14:00:58 2017  So did I [thankful there is no shame face icon]. Francois Cloutier wrote: Somehow, I've missed to see that option :)   command line and apache+ldap authentication, posted by Stefano Lacaprara on Thu Apr 6 17:36:46 2017  Hi,   we are running an elogd (with SSL) server on a machine and using apache as a proxy.       Re: command line and apache+ldap authentication, posted by Stefan Ritt on Fri Apr 7 12:16:24 2017  Hi, the elog command line client does not know anything about Apache authentication, therefore the authentication with the elog username/password fails. As an alternative to the command line client you can use the "curl" utility (available under Linux). This tools has the "-u" flag, which works with Apache. The tricky thing is now to "emulate" your browser submitting an entry. You can do   Elog not see image magick, posted by Daniel Sajdyk on Wed Nov 30 14:32:00 2016  Hello. I finally try add ImageMagick to ELOG. I downloaded latest version (ImageMagick-7.0.3-Q16) and installed it. Everything looks ok, but when I start Elog service it says that "ImageMagick       Re: Elog not see image magick, posted by Stefan Ritt on Wed Nov 30 14:53:41 2016  The detection in elogd works by executing the command "convert" and check if the program executes. If you start elogd as a service, the program might see another path variable. Maybe reboot Windows or start the service in the environment of a real user instead of system, where it might miss your modified "path".          Re: Elog not see image magick, posted by Daniel Sajdyk on Tue Dec 6 13:48:48 2016  Ok. It take me a while, but I reinstalled ImageMagick with marked option "convert". Now, when I start elog, it can see ImageMagick, but screenshots attached to elog entries are still in original sizes. And, I don't see buttons for rotating, resizing images.  I look into elog cfg options, but only what I found is Thumbnail size which, it looks, don't work.             Re: Elog not see image magick, posted by christian on Mon Mar 27 11:11:31 2017  Hi, Maybe the post is outdated already, but I want to share my experience anyway. I faced the same problem as Daniel: The most recent ImageMagick package was not detected by elogd even though it was installed. I could trace back the problem to the following issue:                Re: Elog not see image magick, posted by christian on Mon Mar 27 12:42:07 2017  Update: While the image scaling via ImageMagick works when running elog manually it doesn't when running elog as a service. The service is hosted in the same user environment that allows image scaling with elog started manually. What else could go wrong?                   Re: Elog not see image magick, posted by Stefan Ritt on Wed Apr 5 13:16:34 2017  Must be your PATH environment variable. You have usually different paths when running interactively or as a service. Try to change the path seen by services, or put the ImageMagick executable in the same directory as elogd. Stefan                      Re: Elog not see image magick, posted by christian on Fri Apr 7 09:58:33 2017  This I do not fully understand: To my understanding the PATH environment variable (includes the ImageMagick path) is a system variable and should be accessable from any account and should be valid under any conditions. Am I wrong? Additionally, I tried adding the system Path variable to the user specific variables for that user that runs the service (Path = %Path%) in the system settings. Finally, I tried copying the imdisplay.exe                         Re: Elog not see image magick, posted by Stefan Ritt on Fri Apr 7 10:22:03 2017  I don't undersand myself fully how services see the environment. Like if they see the PATH at all. In some occations it helped to run the service not under the SYSTEM account, but under the (admin) account of a real user. Stefan                            Re: Elog not see image magick, posted by Stefan Ritt on Fri Apr 7 10:24:31 2017  Ah sorry. I recall now: Under Windows, calling subprocesses from a service does not work at all. After a couple of days of work I was not able to get this running. If somebody has some idea, I'm happy to try it. So most people use the elogd daemon in the background only under Linux. Stefan                               Re: Elog not see image magick, posted by christian on Fri Apr 7 11:46:09 2017  Ok, this explains why it doesn't work. Thank you for the support anyway. ELOG is a great piece of software. Christian   pre defined Find as Home page, posted by Paraic Fahey on Fri Mar 24 15:36:55 2017  This command makes the Homepage a FIND page: Start page = ?cmd=Find My question is: can we pre-populate some of the search fields and execute the search so that the homepage becomes the SEARCH RESULTS       Re: pre defined Find as Home page, posted by Andreas Luedeke on Thu Apr 6 11:01:30 2017  It's very simple, no need for the find command. E.g.: Start page = ?Author=luedeke&Category=Question&mode=summary in this forum would do https://midas.psi.ch/elogs/Forum/?Author=luedeke&Category=Question&mode=summary Paraic   Elog stopped working, posted by John Becker on Wed Mar 29 14:48:40 2017  Dear all,   I have elog version 3.12-bd75964 installed on an Ubuntu OS. We started working with it yesterday and today I was informed that the users could       Re: Elog stopped working, posted by David Pilgram on Wed Mar 29 15:11:22 2017  I don't know if you can get elog to generate a log file - check the documentation, I don't bother.  But I do have some experience with this matter. There are two related circumstances I know of that can arise which will cause elog to crash.       Re: Elog stopped working, posted by Andreas Luedeke on Thu Mar 30 09:14:13 2017  I have a crontab set-up for root: crontab -e * * * * *       if ! ps -C elogd >/dev/null;then /sbin/service elogd restart;fi   Issue with zero-length mail attachments, posted by Andrew Daviel on Sat Mar 18 02:10:33 2017  We have elog-2.7.5-1.i386 on SL 5 If I create an elog entry using the web interface, and include an inline image,  email is sent with a zero-length named attachment - the MIME header is present, but no content.       Re: Issue with zero-length mail attachments, posted by Andrew Daviel on Mon Mar 20 22:44:27 2017    Andrew Daviel wrote: We have elog-2.7.5-1.i386 on SL 5   Possible misuse of email headers Message-Id and In-Reply-To, posted by fbretel on Wed Feb 8 16:38:15 2017  Hi, As mentionned before, we happen to fail to receive email messages related to updates on elog entries at our site. My understanding is that the SMTP header Message-Id MUST be unique for each email message. Whereas all elogd email       Re: Possible misuse of email headers Message-Id and In-Reply-To, posted by Stefan Ritt on Wed Feb 8 18:16:30 2017  A pull request would be highy appreciated, because you can then test it thoroughly on your side. Adding a random number to the message id is simple. "Reply-to" indeed does not make sense since elog cannot receive emails. Most sites use a generic "noreply@<domain>" to indicate to the user that a reply does not make sense. I guess the "Reply-to" does not have to be unique, right?          Re: Possible misuse of email headers Message-Id and In-Reply-To, posted by fbretel on Wed Mar 15 16:04:13 2017  Pull-request posted. Cheers.             Re: Possible misuse of email headers Message-Id and In-Reply-To, posted by Stefan Ritt on Wed Mar 15 16:42:35 2017  Pull-request merged. fbretel wrote: Pull-request posted.   Is it possible change content of the notifying mail content (attachements...) ?, posted by Christine Quicot on Tue Feb 7 18:45:08 2017  Hello all, I would like to configure the email that is sent to notify users, when an entry is submitted: - Is it possible to attach to the mail the files attached to the entry ?       Re: Is it possible change content of the notifying mail content (attachements...) ?, posted by Stefan Ritt on Tue Feb 7 18:54:00 2017  Please look in the manual under "Email Format" and "Use Email Subject". Christine Quicot wrote: Hello all,          Re: Is it possible change content of the notifying mail content (attachements...) ?, posted by Christine Quicot on Wed Feb 8 09:34:39 2017  Hello, I'm sorry but that's a part of the manual I've read many times, and I'm not interested in changing the subject of the email, but only body and attachements.             Re: Is it possible change content of the notifying mail content (attachements...) ?, posted by Stefan Ritt on Wed Feb 8 13:09:58 2017  I'm sorry but you are only half right. The mail contenct cannot be changed. But if your email notifications are sent as HTML, they contain a 1:1 copy of the elog entry, which does not make sense to change. For the attachment to be attached to the email, you need the flags of "Email Format". The default there is 63, which means that elog attachments ARE sent as mail attachments.   calculate diff of 2 date(s), posted by Alex Kühnel on Wed Sep 28 18:48:04 2016  hi I have an elogsystem for documenting emergency services. I have a starttime and an endtime. Is it possible to calculate the diff between the 2 timestamps and convert it to minutes?       Re: calculate diff of 2 date(s), posted by Alex Kühnel on Fri Sep 30 11:21:44 2016  I found the solution in the forum :-) subst Einsatzzeit = $shell(/usr/local/elog/diff.sh \"$Einsatzbeginn\" \"$Einsatzende\") and diff.sh is          Re: calculate diff of 2 date(s), posted by Alex Kühnel on Fri Sep 30 11:25:08 2016  is ist possible that subst only works for the initial create of a logbook entry? when I change/edit one of the parameter "Einsatzbegin" or "Einsatzende" the "Einsatzzeit" is not changed. regards             Re: calculate diff of 2 date(s), posted by Stefan Ritt on Fri Sep 30 12:33:38 2016  There is the "subst on edit = ..." option you should use in addition. Stefan Alex                Re: calculate diff of 2 date(s), posted by Alex Kühnel on Mon Oct 3 10:01:53 2016  thx! Stefan Ritt wrote: There is the "subst on edit = ..." option you should use in   How can change the justification of a column?, posted by fabio vitale on Mon Jan 30 17:52:20 2017  It is possible to change the justification for a column/attribute in the list mode (left-aligned, centered, right-aligned)? Right now Elog treats each colum of a list as centered,         Re: How can change the justification of a column?, posted by Stefan Ritt on Mon Jan 30 17:58:11 2017  You can do that chaning the CSS of the underlying theme. But you need some experience with CSS. fabio vitale wrote: It is possible to change the justification for a column/attribute          Re: How can change the justification of a column?, posted by fabio vitale on Mon Jan 30 18:30:30 2017  I need to set text-align:left but only for an attribute in the List mode, For example, say that FirstName column must be left justified in list view. What is the name of the cell content in the default elog.css? Stefan             Re: How can change the justification of a column?, posted by Andreas Luedeke on Tue Jan 31 08:42:54 2017  You might tell your browser to show you the source code of an ELOG page in list mode. There you'll find the class name you're looking for. Cheers, Andreas fabio             Re: How can change the justification of a column?, posted by Stefan Ritt on Tue Jan 31 09:20:07 2017  The CSS class for the list display table "listframe". If you want the second column to be left-aligned, you put following into elog.css: .listframe td:nth-child(2) {    text-align:left;                Re: How can change the justification of a column?, posted by fabio vitale on Tue Jan 31 18:10:29 2017  Thank you Stefan: it worked! Now I am wondering if there is some syntax to force this behaviour at the attribute level in elog.cfg, without the need to modify the css, I mean simply based on the attribute name (not its content). The syntax Style <attribute> <value> = <style>                   Re: How can change the justification of a column?, posted by Stefan Ritt on Tue Jan 31 21:38:44 2017  This is currently not possible. /Stefan fabio   Empty mxml directory in commit a6e5962, posted by Christine Quicot on Tue Jan 31 17:49:16 2017  Hello, I wonder if it's normal that in the sources files, new created mxml directory is empty. In commit # a6e5962 4 files are deleted but not moved:       Re: Empty mxml directory in commit a6e5962, posted by Stefan Ritt on Tue Jan 31 21:29:05 2017  The mxml package has been converted into a submodule in the git repository. At http://midas.psi.ch/elog/download.html you see that you need a "--recursive" flag to clone it. If you have already checked out the sources, you need a git submodule update --init --recursive   Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Terry Almond on Mon Jan 30 15:50:45 2017  I've created an elog where users can then enter links to a file: for example they would enter: <a href="file:///M:/Data/Inspection%20Reports/ABC123.doc">ABC123</a> If they are running this on their desktops where everyones M drive is mapped to the same location, not a problem, the file opens perfectly.       Re: Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Stefan Ritt on Mon Jan 30 16:47:31 2017  Linking to external files via "file:///..." is a bad idea, since only a pointer is stored in the elog. So if someone puts somehing on M: and the drive is removed, the file is physically gone. No way to retrieve it. Instead of puttting links to files, users should get trained to ATTACH the files to elog cntries (V3 of elog has a "Drop attachments here..." section. Only then the files are physically transferred into elog and accessible          Re: Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Terry Almond on Mon Jan 30 16:56:34 2017  Hi Stefan Unfortunately this would become impractical for us as many of the test data files which we'd need to link too are Gb's in size, some over 100Gb, hence only the files needed to do a say an inspection of the equipment would be copied onto memory sticks. Currently we use an excel speadsheet             Re: Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Stefan Ritt on Mon Jan 30 17:45:18 2017  If a file is on a memorystick and the memorystick is gone, how could elog bring it back? What you ask for is magic, sorry for that. Also if you move files outiside elog from one folder (drive) to anohter. How shoudl elog keep track of these files if they are outside? If your colleague moves some piece of equipment from A to B, without telling you, how can you guess where B is?                Re: Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Terry Almond on Tue Jan 31 11:42:19 2017  Hi Stefan, Obviously it's not magic but my inability to explain. I've attached a quick jpg of the file structure we use. So for every project we just repeat the file structure. It then becomes a browser based interface for our engineers, inspectors, project managers etc. so via the network they                   Re: Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Stefan Ritt on Tue Jan 31 12:46:30 2017  Sure, we (Andreas and I) get your point. But you say "... we have no control of the device allocation". If you have no control, how could elog have control? As Adreas said, the file:// access is even done inside your browser, thus bypassing elog, so you have to tell your browser where to find the files. I cannot say more than what Andreas said in elog:68562       Re: Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Andreas Luedeke on Tue Jan 31 08:18:05 2017  Hi Terry, I'm not really sure I understand the question; I'll try to rephrase how I understood it. You have loads of measurement data. All this data is stored not in ELOG but in a common drive M:. When people work off-site, they copy the ELOG data and all the measurement   Elog crashing at random intervals, posted by Lee Burnside on Sat Jan 28 22:23:46 2017  We're running Elog 3.1.2 om SL 7.2 and keep getting random crashes, sometimes when no one is accessing a logbook. The following is from /var/log/messages with debugging turned on after the latest crash. Jan 28 12:43:56 archer elogd[9629]: POST /PHYS3305Spring2017/ HTTP/1.1       Re: Elog crashing at random intervals, posted by Lee Burnside on Mon Jan 30 12:03:36 2017  Never mind, version from github solved issue.   Lee   elogd crashes during SSL Mirror operations involving attachments, posted by Andreas Warburton on Mon Jan 9 17:15:56 2017  My MacOS (10.12.2) elogd version V3.1.2 is a recent git commit (edc5e85), due to the fix to my earlier-described issue solved in the thread here: https://midas.psi.ch/elogs/Forum/68519. I am trying to (re-)set up Mirror functionality with a linux server running the standard public (V3.1.2-bd75964).  I had initially updated the linux server so that it also had the latest git commit (edc5e85), but could then not even add new logbook entries that involved attachments to it.       Re: elogd crashes during SSL Mirror operations involving attachments, posted by Andreas Warburton on Fri Jan 13 08:27:15 2017  The attached screenshot shows the behaviour after doing a synchronization (with Mirror simulate = 1) following first having ensured that the local (Mac) and remote (linux) ELOGs initially showed "All entries identical" when doing a simulated synchronization, and then having edited local entries 9707 and 9709 by uploading (different) attachments to them.          Re: elogd crashes during SSL Mirror operations involving attachments, posted by Andreas Warburton on Fri Jan 13 21:05:49 2017  When I switch from SSL = 1 to SSL = 0 and I use http:// instead of https://, the ability to upload attachments to logbook entries returns.  With both Chrome and Safari browsers, with SSL = 1 the file upload hangs after only a small percentage of the file has been uploaded.  I ran the following openssl diagnostic on my elogd port.  Would anyone have advice on what might be causing such errors?             Re: elogd crashes during SSL Mirror operations involving attachments, posted by Andreas Warburton on Sat Jan 14 08:27:42 2017  For the time being, I am deeming ELOG 3.1.2 unusable with https (SSL = 1) functionality on my "Debian GNU/Linux 7 (wheezy)" server with "OpenSSL 1.0.1t", due to the described apparent issues with SSL.  Reverting to http (SSL = 0) brings back my ability to upload attachments and synchronize with a remote elogd running on a MacOS laptop.                Re: elogd crashes during SSL Mirror operations involving attachments, posted by Andreas Warburton on Thu Jan 19 12:56:51 2017  Further to my comment in https://midas.psi.ch/elogs/Forum/68549, if the described synchronization requires attachment(s) to be transferred from my Mac laptop to the Debian linux server (with SSL = 0 set), it fails in all the tests that I tried. To check whether these problems are linked to the OpenSSL version on the linux server, we also tried building an elogd executable using 1.0.2j   "No SMTP host defined in [global] section of configuration file", posted by Luca on Wed Jan 18 05:25:44 2017  Hi, I started re-using after a month an elog on my linux machine and, without any apparent reason since I did not used the machine at all in the last month, every time I try to submit a post I get the following error       Re: "No SMTP host defined in [global] section of configuration file", posted by Stefan Ritt on Wed Jan 18 10:25:20 2017  These problems usually come when you are using a different configuration file that the one you think you are using. Note that you explicitly can tell elogd to use a specific configuation file with the "-c" flag. Also make sure to restart elogd after major changes. Luca   UTC time, posted by Luca on Mon Jan 9 15:39:59 2017  Dear all, I am trying to have the elog timestamp in UTC time instead of local time using the following config file but without success. Do you know what I am doing wrong?       Re: UTC time, posted by Stefan Ritt on Mon Jan 9 17:18:15 2017  How do you believe that you can preset a Submission item? Preset only works for attributes, so you have to define an attribute like "Submission UTC" or similar and preset this attribute with Preset Submission UTC = $utcdate          Re: UTC time, posted by Luca on Mon Jan 9 17:26:37 2017  Dear Steve, thanks a lot. Sorry but I am not expert of elog. I "inherited" from a colleague and wanted to see if I can keep it alive but to do it I would need to move to UTC. Should this command affect the "INSERT CURRENT TIME/DATE" button? It does not seem to change.             Re: UTC time, posted by Luca on Thu Jan 12 02:35:02 2017  Any suggestion? Luca wrote: Dear Steve,             Re: UTC time, posted by Stefan Ritt on Thu Jan 12 08:28:45 2017  The INSERT CURRENT TIME/DATE button is not affected by this setting. Luca wrote: Dear Steve,             Re: UTC time, posted by Andreas Luedeke on Thu Jan 12 09:10:06 2017  Hi Luca, if you want to change all datetime properties to UTC time, then you'll just need to set the timezone on the server to UTC, before elogd is started.   Limit number of characters for "login user" parameter string ?, posted by Christine Quicot on Tue Jan 10 09:59:30 2017  Hello all, I use ELOG for about 30 users, and I've listed their email adresses in the "login user" parameter, using the LDAP authentication. As I had problems with the users from the end of the list (they couldn't log in the logbooks) I guessed that there is a max length for the string       Re: Limit number of characters for "login user" parameter string ?, posted by Stefan Ritt on Tue Jan 10 11:13:02 2017  There is a limit of 100 options per line, so you probably run against that. This is defined in elogd.h with MAX_N_LIST and MAX_N_ATTR. You can try to increase these and recompile, but at some point you will hit the stack size limit of your operating system and elogd will crash. Christine   Is it possible to add custom menu commands, posted by Alex Kühnel on Sun Jan 8 19:26:29 2017  hi forum, my question, is it possible to add a custom menu entry (f.e. "Auswertung"). I will start a new php page and do some system code starting from the new page. I have attached a pic of my "Bereitschaftsdoku".       Re: Is it possible to add custom menu commands, posted by Stefan Ritt on Mon Jan 9 11:00:53 2017  No, calculations are not easily possible with elog. You can write some Javascript code to pull out all minutes, add them up and manipulate the DOM tree to show the results, but this requires some JavaScript knowlegde. Alternatively, export your table to a CSV file and do your calculations with a spreadhseet program.          Re: Is it possible to add custom menu commands, posted by Alex Kühnel on Mon Jan 9 16:02:35 2017  ok, tnx! I will do the export and calculation with Excel regards /alex   How to make two attributes reacting with each other, posted by Xuan Wu on Thu Jan 5 12:55:05 2017  Hi all, I have two attributes defined like following Attributes = Author, Author Email, Icon, Category, System, Subject       Re: How to make two attributes reacting with each other, posted by Stefan Ritt on Thu Jan 5 13:24:06 2017  You can do that with conditional attributes (see documentation):   Attributes = Author, Author Email, Icon, Category, System, Subject          Re: How to make two attributes reacting with each other, posted by Xuan Wu on Thu Jan 5 14:04:13 2017  Thanks for your quick reply! I just test what you suggested, even I test {1} Preset on edit Icon = icon1.gif, they both didn't work. Stefan Ritt wrote: You can do that with conditional attributes (see documentation):             Re: How to make two attributes reacting with each other, posted by Stefan Ritt on Thu Jan 5 14:13:07 2017  The example I gave you worked for me, I actually tested it. Please note that it contains Options Category = ... and not                Re: How to make two attributes reacting with each other, posted by Xuan Wu on Thu Jan 5 14:23:08 2017  Sorry for my carelessness. What you said is definitely right. I just wonder how can Icon and Catagory change simultaneously whatever which one be selected first. Stefan                   Re: How to make two attributes reacting with each other, posted by Stefan Ritt on Thu Jan 5 14:35:22 2017  If you select a (different) category, the current icon setting simply gets overwritten, what ever it was before. Xuan Wu wrote: Sorry for my carelessness. What you said is definitely right. I just wonder                      Re: How to make two attributes reacting with each other, posted by Xuan Wu on Thu Jan 5 14:40:59 2017  What I mean is that, when I select a catagory, the icon will change. If I change the icon, I need the catagory change too.  Stefan Ritt wrote: If you select a (different) category, the current icon setting simply                         Re: How to make two attributes reacting with each other, posted by Andreas Luedeke on Fri Jan 6 10:22:24 2017  IOptions does not support conditional attributes. I think the proper solution would be to remove the icon selection field from the input form: Show Attributes Edit = Author, Author Email, Category, System, Subject The                            Re: How to make two attributes reacting with each other, posted by Xuan Wu on Fri Jan 6 11:05:18 2017  So, as far as I know that ROptions and IOptions doesn't support conditional attributes. I think what you suggest is a nice idea. An alternative way is putting Category attribute before Icon attribute and adding a tooltip to Icon attribute. However, I think your advice is better. Thanks!   elogd crashes during Find and Mirror operations under MacOS, posted by Andreas Warburton on Sat Dec 24 10:40:00 2016  When installing ELOG 3.1.2 on my Mac Sierra (10.12.2) with the latest XCode 8.2.1, it seemed to install fine but for one warning when building elogd: cc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -DHAVE_SSL -I /opt/local/include -o elogd  src/elogd.c crypt.o auth.o regex.o mxml.o  -lssl src/elogd.c:13840:13: warning: '__builtin___strlcpy_chk' will always overflow       destination buffer [-Wbuiltin-memcpy-chk-size]       Re: elogd crashes during Find and Mirror operations under MacOS, posted by Andreas Luedeke on Tue Jan 3 09:20:23 2017  I have no experience with ELOG on OSX, therefore I can only give very vague and indirect support (sorry). I suggest that you first try an installation without actual logbook data (just move it to a save place for a while). Does a "find" still crash elogd? If elogd is still crashing, you should prune your configuration until it stops crashing. Submit the smallest config here that still crashes the logbook. Since       Re: elogd crashes during Find and Mirror operations under MacOS, posted by Stefan Ritt on Tue Jan 3 09:44:18 2017  The current GIT revision (c017d07) fixes the problem with the strlcpy() function (macOS 10.12.2, XCode 8.2). Can you try if that fixes your other problems, too? Plese remember to use the recursive clone to get that version:          Re: elogd crashes during Find and Mirror operations under MacOS, posted by Andreas Warburton on Tue Jan 3 12:45:13 2017  Thank you very much (both Andreas and Stefan)!  The build now runs without warnings, and I am now able to do Find operations without crashes.  I still am having some issues with the synchronization, but I suspect that this is elog-content related, so will in the coming days do some more testing from CERN (where I have higher bandwidth with my home institution in Canada).  Incidentally, I had to add a line to Makefile in order to be able to             Re: elogd crashes during Find and Mirror operations under MacOS, posted by Stefan Ritt on Tue Jan 3 12:58:13 2017  Ah, thanks for telling me. I added that to the Makefile. I did not need this because I had in my .profiel following line export C_INCLUDE_PATH=/opt/local/include which I need also for other macports-based projects. But having this twice does not hurt.   Gmail email smtp settings, posted by Devrim Esenturk on Mon Jan 2 16:32:18 2017  Hi all I am trying to send email via Gmail smtp with no success. Elog uses port 25 which is not allowed. I need to use 587 or 465 ports to send mail. How can I change the port?   Elog source code giving errors when compiling about missing header files, posted by rahul bhandari on Wed Dec 21 20:15:19 2016  I downloaded the source code from the git repository which contained the new fix that was made for the missing username-crash error. I tried compiling the elogd.c file using a GCC compiler and it gave an error about missing header files. It first gave an error about netdb.h file and when I commented that header file call, it gave further errors for other header files. I do not really understand why it gives an error about that.         Re: Elog source code giving errors when compiling about missing header files, posted by Stefan Ritt on Thu Dec 22 09:41:35 2016  You need the netdb.h header file to compile elog. I see that you compile under Windows. You have to make sure that your compiler installation comes with all header files. The netdb.h file is usually in /usr/include under Unix. rahul   elogd crash on sorting the entries by an datetime attribute, posted by stefano bonaldo on Thu Dec 15 11:12:09 2016  Hello, I'm facing with a crash, which happen when I sort the entries by a datetime attribute (sort or rsort) and then i change the display mode from Full, Summary and Threaded.       Re: elogd crash on sorting the entries by an datetime attribute, posted by Stefan Ritt on Thu Dec 15 13:59:14 2016  I tried your config file on my Mac and it just worked fine without any crash:          Re: elogd crash on sorting the entries by an datetime attribute, posted by Stefano Bonaldo on Thu Dec 15 14:44:32 2016  Hello Stefan, thanks for your answer. So I made a new logbook, without entries. I generated, as you, two new entries and I discover that this problem come out when in the URL the command for the sorting follow the command of the display mode. So for example the following URL give me the issue: http://local.host.com:8080/65+nm/?mode=summary&sort=Record+date             Re: elogd crash on sorting the entries by an datetime attribute, posted by Stefan Ritt on Fri Dec 16 09:27:26 2016  Still no luck. Tried your URL and still works fine for me:                Re: elogd crash on sorting the entries by an datetime attribute, posted by Stefan Ritt on Fri Dec 16 09:55:20 2016  Ok I found it! Was tricky. In my development environment (XCode) it worked fine. Only when I compiled elogd under Sierra on the command line, the probelm occured. That's why I did not see it earlier. It has to do with some functions Apple apparently changed ("strlcpy"). These function now have a new                   Re: elogd crash on sorting the entries by an datetime attribute, posted by Stefano Bonaldo on Fri Dec 16 14:44:19 2016  Bug FIXED! Many thanks Stefan and my warmest congratulations for the elog project. Stefano         Re: elogd crash on sorting the entries by an datetime attribute, posted by Alan Grant on Thu Dec 15 15:42:06 2016  Hi Stefano. This may or may not have anything to do with your specific problem but I notice you have the single word "date" as part of your attribute name and Date is actually a reserved word in Elog. Although your attribute is not exclusively called "date" I have found that          Re: elogd crash on sorting the entries by an datetime attribute, posted by Stefano Bonaldo on Fri Dec 16 02:44:53 2016  Hello Alan, I tried with a new logbook with an attribute without "date" name, but unfortunately I got the same error. Any other suggestions? Thanks   MacOS install failure - cannot find ssl.h, posted by Christina Swinson on Mon Dec 5 20:11:47 2016  Hi, I am trying to install on MacOS Sierra. I believe that I have followed all the steps correctly, but the install is failing with the following error:        Re: MacOS install failure - cannot find ssl.h, posted by Stefan Ritt on Tue Dec 6 09:45:03 2016  If you look into the documentationa at: http://midas.psi.ch/elog/adminguide.html#unix you will see that for Linux (as well asl MacOS) you need the libssl-dev packaged to be installed. There are many ways to install this on MacOS,          Re: MacOS install failure - cannot find ssl.h, posted by Christina Swinson on Tue Dec 6 20:32:48 2016  Oops! I think that I must have skipped straight to the MacOS notes instead of reading the linux section properly. Thanks for the help,             Re: MacOS install failure - cannot find ssl.h, posted by Stefan Ritt on Tue Dec 6 20:38:49 2016  Well, the MacOS section explicitly mentions the MacPorts installation. Christina Swinson wrote: Oops!             Re: MacOS install failure - cannot find ssl.h, posted by Christina Swinson on Tue Dec 6 20:43:48 2016  I responded too quickly. I already have openssl installed via macports (this is the "Mac version" of libssl-dev). Does anyone know where exactly elog is looking for openssl/ssl.h? I have just updated Macports and upgraded to Sierra, so maybe it's                Re: MacOS install failure - cannot find ssl.h, posted by Stefan Ritt on Mon Dec 12 15:28:49 2016  My macports puts it under /opt/local/include/openssl/ssl.h Christina                   Re: MacOS install failure - cannot find ssl.h, posted by stefano bonaldo on Thu Dec 15 01:38:20 2016  On Sierra Macports install openssl in /opt/local/include/ , but copy it into /usr/local/include. You should able to fix it. sudo cp -r /opt/local/include/openssl /usr/local/include/ Stefan                      Re: MacOS install failure - cannot find ssl.h, posted by Stefan Ritt on Thu Dec 15 12:50:51 2016  On Sierre, /opt/local/include should be already included in the standar search path of the prprocessor: /elog$ cpp -v Apple LLVM version 8.0.0 (clang-800.0.42.1)                         Re: MacOS install failure - cannot find ssl.h, posted by Stefano Bonaldo on Thu Dec 15 15:04:53 2016  Currently, in my MacBook Pro with Sierre, the search path /opt/local/include of the prprocessor is not included. cpp -v                            Re: MacOS install failure - cannot find ssl.h, posted by Stefan Ritt on Thu Dec 15 15:41:59 2016  [CODE]export C_INCLUDE_PATH=/opt/local/include[/CODE] should do the trick. Put this into your .profile   Highlight code?, posted by Daniel Sajdyk on Tue Sep 6 13:35:05 2016  Hello :) Is there any way to highlight code (for example php, SQL) in elogs entries? Best Regards       Re: Highlight code?, posted by Stefan Ritt on Tue Sep 6 13:41:32 2016  You can manually highlight code, but there is no automatic language parser. Daniel          Re: Highlight code?, posted by Daniel Sajdyk on Tue Sep 6 13:45:55 2016  I thought so. One  more question :) I want manually add that parser (https://highlightjs.org), but I'm newby in that and don't know where .... I know that downloaded hightlight pack I must put into folder scripts, but where to add this line:             Re: Highlight code?, posted by Stefan Ritt on Tue Sep 6 14:02:56 2016  I did not know about highlight.js . You can put it into any elog page with "Bottom text = ...". I tried it for this forum and put in some C code: #include <stdio.h> int main() {    // printf() displays the string inside quotation    printf("C Programming");                Re: Highlight code?, posted by Daniel Sajdyk on Tue Sep 6 14:51:19 2016  Looks like it works :) Code need to be put in tags: <pre><code class="sql">...</code></pre>                   Re: Highlight code?, posted by Stefan Ritt on Tue Sep 6 15:29:22 2016  In the HTML editor, you can select the code text, then select from the "Styles" drop-down the style "Computer Code", and on the "Normal" drop-down the formatting "Formatted". This puts the code in <pre>  and <code> tags, so you don't have to manipulate HTML directly.                      Re: Highlight code?, posted by Daniel Sajdyk on Tue Sep 6 22:18:29 2016  Ok. Thanks a lot :) Stefan Ritt wrote: In the HTML editor, you can select the code text, then select from the                         Re: Highlight code?, posted by Aaron James Long on Mon Dec 12 13:35:16 2016  Can I ask for some clarification; I would like to include code highlighting for some computational students who will be making use of ELOG.  In the example you showed, my understanding is that you included a "Bottom text =... " entry in the forums elog config. This included the bare minimum remote call outlined by the highlightjs site. Can you clarify (as I'm having issues setting it up) should the "Bottom text=..."                            Re: Highlight code?, posted by Stefan Ritt on Mon Dec 12 13:48:41 2016  All I did was this: Bottom Text = <link rel="stylesheet" href="//cdnjs.cloudflare.com/ajax/libs/highlight.js/9.6.0/styles/default.min.css"><script src="//cdnjs.cloudflare.com/ajax/libs/highlight.js/9.6.0/highlight.min.js"></script><script>hljs.initHighlightingOnLoad();</script>                                 Re: Highlight code?, posted by Aaron James Long on Mon Dec 12 14:04:32 2016  Thanks for the quicky reply Stefan. Yes, I had inut the same string! My error was not restarting the server; I've done this and code highlighting works fine. Stefan   Datepicker not showing, posted by Christine Quicot on Thu Dec 8 15:39:13 2016  Hello users,   When I configure an attribute with "Type <attribute>= date", in the new entry form a clic on the calendar symbol does nothing.       Re: Datepicker not showing, posted by Andreas Luedeke on Mon Dec 12 09:48:14 2016  Just last week I've downloaded the latest version of ELOG, compiled and installed it, and the date picker just works fine. In my case it was an update of an existing installation. Can you provide a bit more information about your case: I guess it was a first time installation? Was is ELOG V3.1.2-754330e or a different GIT version?          Re: Datepicker not showing, posted by Stefan Ritt on Mon Dec 12 10:14:50 2016  I put one in https://midas.psi.ch/elogs/Database/?cmd=New Could also be a pop-up blocker problem. Let's see. Stefan   What's the best way to update elog to newer release?, posted by Xuan Wu on Tue Dec 6 13:29:40 2016  If the older elog has some customized file such as logbooks, elogd.cfg, elog.css, images and so on,  What's the best way to update elog to newer release? Is it the only way to copy these files to the new release?       Re: What's the best way to update elog to newer release?, posted by Stefan Ritt on Tue Dec 6 14:23:34 2016  Make a backup of all you files, then install the new version over the old one, keeping all customizations, then restart elog. Xuan Wu wrote: If the older elog has some customized file such as logbooks, elogd.cfg,   , posted by Tim Schelfhout on Mon Dec 5 13:06:21 2016  Hello, I am using ELOG V2.9.2-2475.  I added some groups and restarted ELOG and all of a sudden it    Disable Delete option when user has the capability to Edit an entry, posted by John Becker on Wed Nov 30 18:06:26 2016  Hi, I have a logbook where users can add entries and edit entries. The delete option has been removed from the menu, but when they edit an entry they are able to delete the entry. Is there a way to remove the Delete option from the menu that appears when Editing an entry?       Re: Disable Delete option when user has the capability to Edit an entry, posted by Stefan Ritt on Wed Nov 30 19:01:03 2016  Save drafts = 0   John          Re: Disable Delete option when user has the capability to Edit an entry, posted by John Becker on Thu Dec 1 13:36:16 2016  Hi Stefan, Thanks for your reply, I did as suggested but the button "Delete" still appears when the edit entry is selected. Am I overlooking something?             Re: Disable Delete option when user has the capability to Edit an entry, posted by Stefan Ritt on Fri Dec 2 13:50:11 2016  No, I get a different result. If I put "Save drafts = 0" in the config example coming with the distribution, I get the following:                Re: Disable Delete option when user has the capability to Edit an entry, posted by John Becker on Fri Dec 2 16:28:17 2016  Hi Stefan,   Found it, it was a typo.   Display of draft entries in elog, posted by Stefan Ritt on Fri Dec 2 13:54:36 2016  Dear all, there seems to be still lots of confusion with the new "draft modus" introduced in elog 3.1.2. Here is how it works: If you edit an old or new entry, your changes are written to the elog server every few seconds. The entry in the elog database is marked as "draft".       Re: Display of draft entries in elog, posted by Stefan Ritt on Fri Dec 2 14:54:58 2016  In version 3.1.2-416db9f I implemented a "Restore" button, which should fix the second drawback. If you press it, you should be able to go back to where you started when editing an entry.   Error: Entry text too big. Please increase TEXT_SIZE and recompile elogd, posted by Xuan Wu on Fri Nov 25 15:00:58 2016  Hi all, A error came out when I pasted a photo in the text area with  HTML Encoding. The photo is a snapshot from Print Screen. When I submitted it, it said "Entry text too big. Please increase TEXT_SIZE and recompile elogd". How can I get rid of this? I've tried changing elogd.cfg       Re: Error: Entry text too big. Please increase TEXT_SIZE and recompile elogd, posted by Stefan Ritt on Mon Nov 28 11:56:06 2016  I guee you tried to paste an image into the text area, and your browser somehow converted this into a text entry, which then of course can become very long. Elog since vesion 3 supports drag-and-drop. You can drop an image from your local disk into the "Drop attachemnts here..." box at the bottom of this page. You can also drag an image directly to the text box like this one:           Re: Error: Entry text too big. Please increase TEXT_SIZE and recompile elogd, posted by Xuan Wu on Wed Nov 30 02:29:36 2016  Thanks for your advice! I've test that dropping an image from my local disk into the text box with Elog-3.1.2. It did work. However, I still have a question want to ask that When I paste a small image into the text area, I can submit it successfully. But when I paste a bigger one, it will say "Entry text too big. Please increase TEXT_SIZE and recompile elogd". And There's the same result in https://midas.psi.ch/elogs/Linux+Demo/.             Re: Error: Entry text too big. Please increase TEXT_SIZE and recompile elogd, posted by Stefan Ritt on Wed Nov 30 08:51:55 2016  How big is your image? I just tried a 5000 x 3600 pixel image (8 MB in size), and it worked fine on the demo logbook. Stefan Xuan                Re: Error: Entry text too big. Please increase TEXT_SIZE and recompile elogd, posted by Xuan Wu on Thu Dec 1 01:40:14 2016  I just test on your Demo logbook. I use a screen-capture tool to create an image which doesn't been saved as a file, the size is 1920*1080(1.8M), then copy it in clipboard, and then paste in text area. Then the web page become very slow, so that I can't submit it sometime. Sometime, I can submit it but it say "Entry text too big. Please increase TEXT_SIZE and recompile elogd". If I drop an image file into the text area, it works. I used                   Re: Error: Entry text too big. Please increase TEXT_SIZE and recompile elogd, posted by Stefan Ritt on Thu Dec 1 08:13:41 2016  Ah, that's the difference! I always drop an image on the text area, never paste it. So please refrain from pasting. Xuan Wu wrote: I just test on your Demo logbook. I use a screen-capture tool to   Cancel button missing when editing an entry, posted by Andreas Luedeke on Wed Nov 16 13:48:33 2016  If I edit an old entry, and do some mistake while editing, then there is currently no way to savely discard the changes. The problem is that the entry will become a draft: if I close the window without saving, then the whole entry is gone: it will be converted into a draft entry. But the draft does contain my changes, it is not the originally saved entry!       Re: Cancel button missing when editing an entry, posted by Stefan Ritt on Wed Nov 16 14:01:18 2016  The problem is that the elog database does not allow for a copy of an entry before you make modifications (and therefore get a "draft"). This is actually very simila to other note taking programs. I use Evernote, which constantly synchronizes between devices, and there I also cannot go back to the version before I started making modification. What one would need is a version system (and Evernote has one), so you can go back to the previous verison,          Re: Cancel button missing when editing an entry, posted by Grant Jeffcote on Wed Nov 16 17:12:40 2016  Andreas, Doesn't using the Save Drafts = 0 option result in the old 'Back' button returning (replacing the Delete option) meaning you can revert back to your old (unmodified) version without saving, sure it doesn't save a draft but I'd rather be able to return back and lose             Re: Cancel button missing when editing an entry, posted by Andreas Luedeke on Thu Nov 17 09:14:15 2016  Yes, "Save Drafts = 0" does the trick. But it is the "zero-option": trivial, but not satisfying ;-) Warning: the "back" button of the browser has a very undesired effect: the entry is then converted into a draft and not shown anymore in list view!             Re: Cancel button missing when editing an entry, posted by Stefan Ritt on Mon Nov 21 15:07:05 2016  Well, the "undesired effect" you describe is exactly the reason for having drafts. Somebody works on a lengthy message, then the browser dies, or the user by accident hits the "back" button and (by accidnt, ehem...) confirms the dialog popping up which says "changes will be lost". In that case the draft mechanism should take care of that the lengthy message is not lost. That's where it is for. If one does not like it, one can                Re: Cancel button missing when editing an entry, posted by Christine Quicot on Wed Nov 23 09:25:15 2016  Hello, In my opinion, there should be a "close/return" button (discard changes), even with the drafts enabled, but effectively there will have to be several saves made (at least before/after).          Re: Cancel button missing when editing an entry, posted by Andreas Luedeke on Thu Nov 24 07:38:52 2016  Hi Stefan, actually what you refer to as the "quick and dirty" solution is probably the only feasible one: to store a copy of the entry in the browser and restore that copy with a "cancel" button. Otherwise you would need a full-fledged revision management, to deal with multiple copies of the same entry open in several browsers.   Yet, that does not solve the "problem"             Re: Cancel button missing when editing an entry, posted by Stefan Ritt on Thu Nov 24 08:40:31 2016  Andreas Luedeke wrote: But as a first step, it might be worthwhile to document this behaviour in the ELOG "User's Guide". Drafts are currently only mentioned in the elogd.cfg syntax pages under "Save drafts" and "autosave".   How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by I Gede Made Wira Saputra on Tue Nov 15 04:42:49 2016  Hi All, I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit I follow the instruction in elog:68039 This is my configuration       Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by Xuan Wu on Tue Nov 15 07:29:04 2016  I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH I Gede Made Wira Saputra wrote: Hi All,          Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by I Gede Made Wira Saputra on Tue Nov 15 10:24:18 2016  Hi Xuan Wu, Nothing happen, I still got error. Do you have any more idea? I really confuse. Xuan             Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by Xuan Wu on Tue Nov 15 11:22:31 2016  You can use command to test your email service and your username and password.  telnet your.email.host  25 ehlo hostname                Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by I Gede Made Wira Saputra on Wed Nov 16 07:07:35 2016  Hi Xuan Wu, I got error from stunel as below.                   Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by Xuan Wu on Thu Nov 17 09:54:03 2016  Hi, I'm sorry that I'm not familiar with the stunel. I came across email sending problem before. I created a email server in my own PC called postfix. Elog can use this email server to send email. Finally, I could use the email server from our institution. Maybe Luedeke or Stefan can   Error starting elog 3.1.2 on Windows server, posted by Peter K on Mon Oct 31 09:51:02 2016  Hi, I'm trying to upgrade ELOG 2.9.2, which I have been used many years, to the new version (3.1.2). I can't run the new version even from the command line:   Reset a user's password, posted by Val Schmidt on Fri Oct 28 16:30:36 2016  Is it possible for an administator to reset a user's password?  Thanks, Val       Re: Reset a user's password, posted by Stefan Ritt on Fri Oct 28 16:41:11 2016  Sure. Hit "Config", select other user, and click on "Change password". Stefan Val   Datetime format with elog client, posted by Alan Grant on Wed Oct 26 16:39:38 2016  What is the input format expected by the elog client for a required Datetime defined field when inserting a record? (Eg: October 26, 2016 = ? in the field's data parameter). I have read some prior posts on this and the indication is that the input needs to use epoch time, however even when I enter 1477493161 or 0       Re: Datetime format with elog client, posted by Alan Grant on Wed Oct 26 21:41:42 2016  UPDATE: As I continue to test and troubleshoot this problem I noticed something peculiar: the Datetime defined field that the client is rejecting when I attempt a record insert is listed as a Required attribute. However, when I just remove it from the Required list the record including          Re: Datetime format with elog client, posted by David Pilgram on Wed Oct 26 22:15:46 2016  Hi Alan, I have no idea if this helps but the Date and Time formats in the config file internally interconnect, as I discovered in trying to define them separately.  Define one, and the other is defined.             Re: Datetime format with elog client, posted by Alan Grant on Thu Oct 27 04:16:10 2016  I really appreciate your reply David. There's only one Datetime defined field that I'm working with so I'm not sure what you mean, if you don't mind elaborating? It sounds interesting.          Re: Datetime format with elog client, posted by Andreas Luedeke on Thu Oct 27 11:18:17 2016  Yes, this is a known bug of ELOG, see elog:68404 Alan Grant wrote: UPDATE:   posting messages through email, posted by Devin Bougie on Mon May 2 22:20:40 2016  Hello, Has anyone implemented an email gateway for ELOG, allowing users to submit entries by sending an email?  Granted this should be possible using the elog       Re: posting messages through email, posted by Devin Bougie on Mon Oct 17 20:15:09 2016  Just incase anyone's interested, we went ahead and wrote a python script to act as an email gateway for ELOG.  If anyone's interested, we'd be happy to share and appreciate any additional improvements.   Is there a way to export logs, posted by Alex Kühnel on Mon Oct 3 10:02:36 2016  hello Is there a way to export logs from elog (for example after I have selected a filter) to txt or csv... I found the "Download" attribute but this works for only one elog entry...       Re: Is there a way to export logs, posted by Alex Kühnel on Mon Oct 3 10:18:19 2016  shame on me, there is a way! I can search with find and then export as csv file /alex   Enforcement of password complexity , posted by Chris Smyth on Sat Oct 1 15:32:53 2016  Is there a way to enforce password complexity for users? Either in this version of elog or the newest version?   Using an RSS reader on a pasword protected elog, posted by Jackie Schwehr on Wed Sep 28 10:36:53 2016  I'm trying to set up a python rss parser to read the output from my collaboration's elog, however the elog is password protected and I cannot figure out how to have a python scrip get past the login screen.  Is there something obvious I'm missing that will allow a parser to submit a username and password? If that's too python-specific of a question for this audience, then what is the exact security method elog uses, so I can get   Using an RSS reader on a pasword protected elog, posted by Jackie Schwehr on Wed Sep 28 10:27:24 2016  I'm trying to set up a python rss parser to read the output from my collaboration's elog, however the elog is password protected and I cannot figure out how to have a python scrip get past the login screen.  Is there something obvious I'm missing that will allow a parser to submit a username and password? If that's too python-specific of a question for this audience, then what is the exact security method elog uses, so I can get   FCKEditor not working correctly on a Windows server., posted by Marty Jansen on Mon Jul 20 14:45:12 2015  Hi, After working many years with previous versions of ELOG, I decided to update to the latest version. I have installed ELOG version 3.1.0 on a WIndows 2012R2 server with IE 1. The editor is showing up, but everything is greyed out, execpt for some       Re: FCKEditor not working correctly on a Windows server., posted by Andreas Luedeke on Mon Jul 20 15:50:56 2015  Marty Jansen wrote: I have installed ELOG version 3.1.0 on a WIndows 2012R2 server with IE 1. [...]          Re: FCKEditor not working correctly on a Windows server., posted by Marty Jansen on Mon Jul 20 17:09:01 2015  Sorry for the typo,of course I meant IE 11. I do get on "Error on page" error. After switching on the developer tools, I get the following output: {exception} The value of the property 'dndInit' is null or undefined, not a Function object. I get this error when I trying to make             Re: FCKEditor not working correctly on a Windows server., posted by Marty Jansen on Tue Jul 21 09:10:25 2015  Another thing appeared in the IE message ribbon at the bottom before it states "Error on page" . I do get a message that ELOG is trying to download data from http://latex.codecogs.com/css/equation-embedde.css..... Well, this server has no internet connection and will not get an internet connection.                Re: FCKEditor not working correctly on a Windows server., posted by Andreas Luedeke on Tue Jul 21 14:26:03 2015  I think I remember that you can savely ignore the warning message, as long as you don't try to use the equation editor. But I haven't tested it myself; my servers can access the internet - although from behind firewall. You should be able to configure the CKeditor with some configuration file: what plugins are to be included etc. But I haven't done it myself                   Re: FCKEditor not working correctly on a Windows server., posted by Andreas Luedeke on Tue Jul 21 14:59:19 2015  Okay, it is very easy: just edit "scripts/ckeditor-config.js" in the installation directory and remove the two references of "eqneditor". Any new browser session will not have the equation editor anymore. Andreas             Re: FCKEditor not working correctly on a Windows server., posted by Andreas Luedeke on Tue Jul 21 14:15:51 2015  I've browsed the web for the error and apparently it is appearing with a variety of IE versions in combination with certain versions of the CKeditor. Sorry, I can't help you with the problem: only found problem reports, no fixes. Therefore my advise (for now) would be: either use the old ELOG version or use a different browser. Microsoft anyway announced the end-of-life for IE with Windows 10.                Re: FCKEditor not working correctly on a Windows server., posted by Andreas Luedeke on Tue Jul 21 15:02:19 2015  Just to clarify: I can easily use IE11 to access my 3.1.1 version of ELOG. I run the server on a Linux box (SL6) but I don't think that this makes any difference. I repeat my guess: ELOG is probably not installed properly on your WIndows server. My suggestion would be to move the old installation to some       Re: FCKEditor not working correctly on a Windows server., posted by Marty Jansen on Sat Jul 25 20:28:45 2015  Sorry for the late reply. I have installed a slightly newer version of Elog, but the results are the same. I do get de the 3 editor bars, but the top 2 are greyed out and the bottom one doesn't do anything if clicked. I have commented out the lines that refer to the online equation editor, but that doesn't help much either. I think I let it rest. The old 2.9.xx version still works great, so we leave it at that.          Re: FCKEditor not working correctly on a Windows server., posted by Richard Stamper on Tue Oct 13 12:39:14 2015  If you are using IE as your browser, the problem may be with that rather than the server. By default IE 11 display intranet sites in a "Compatibility mode" which breaks the FCKEditor in Elog version 3.  Fortunately this mode can be disabled, which is what I have had to advise users here to do.             Re: FCKEditor not working correctly on a Windows server., posted by Matthew Sauder on Fri Sep 23 23:38:28 2016  I know I'm a little late but is there a way to do this from elog? I've tried using the following line in the config but it doesn't seem to work in IE10. I figure if there is a way to modify the <head> before the page loads there could be hope. Top text = <script>var meta = document.createElement('meta');meta.httpEquiv = "X-UA-Compatible";meta.content = "IE=edge";var   How do I use Preset Text only when a given topic is selected?, posted by Christina winson on Wed Sep 21 18:58:18 2016  Hi, I'm looking to use a template for only a subset of logbook entries. Is there some way to apply a template when a specific topic or category is selected?       Re: How do I use Preset Text only when a given topic is selected?, posted by Andreas Luedeke on Thu Sep 22 09:56:49 2016  Hi Christina, You want to use "conditional attributes". See elog:68350 for an example. Cheers, Andreas   Christina winson wrote: Hi,          Re: How do I use Preset Text only when a given topic is selected?, posted by Christina Swinson on Thu Sep 22 14:45:17 2016  Awesome! Thanks Andeas. Andreas Luedeke wrote: Hi Christina, You want to use "conditional   notification error services in CentOS 6.5, posted by Banata on Tue Jan 13 04:11:33 2015  hello, I just upgrade from 2.9 into 3.0.0 in CentOS 6.5 but after upgrade, I can't check elogd services via command line service elogd status,       Re: notification error services in CentOS 6.5, posted by Stefan Ritt on Tue Jan 13 10:07:02 2015  The init script supplied with elog was originally written for Redhat. It seems like CentOS has slightly changed the init daemon management, but I'm not an expert on that, nor do I have CentOS installed. If somebody comes with a fixed elogd.init for CentOS, I'm happy to include that in the distribution. /Stefan          Re: notification error services in CentOS 6.5, posted by Darren Hollinrake on Sun Sep 18 03:31:42 2016  The quick fix I found was to uncomment line 10 in the init.d file. (This was tested on a CentOS 6.8 AWS instance.) . /etc/rc.d/init.d/functions This will allow the status command to function properly.             Re: notification error services in CentOS 6.5, posted by Stefan Ritt on Wed Sep 21 17:23:15 2016  Ok, I will include this patch in the distribution. Stefan Darren   Body Width, posted by Chris Smyth on Mon Sep 12 18:44:09 2016  How do I make this section Wider or Shorter in the 2.7.8 version? Maybe I did something to make it shorter? ELCode shows as a full box but plain txt is very short box.        Re: Body Width, posted by Chris Smyth on Mon Sep 12 19:10:03 2016  > How do I make this section Wider or Shorter in the 2.7.8 version? > Maybe I did something to make it shorter? ELCode shows as a full box but plain txt is very short box.    Windows service settings, posted by christian on Fri Sep 9 10:31:15 2016  Hello, I've been successfully using elog as a daemon since several years on a Linux machine. For some reasons recently I had to switch to a Windows 7 machine. Here, setting up the elog daemon doesn't work for me:       Re: Windows service settings, posted by Stefan Ritt on Fri Sep 9 11:33:04 2016  These problems are usaully related to user rights. Try starting the service under a different (maybe admin) user. Stefan christian          Re: Windows service settings, posted by christian on Fri Sep 9 13:17:36 2016  Hi Stefan, you were right - running the service by an authorized user solved the problem. Thanks a lot.   error message "Command Config is not allowed" after registering, posted by Mark Bergman on Fri Oct 21 01:09:54 2011  After registering, elog displays a page with the message:      Error: Command "Config" is not allowed for user "" However, the registration is successful. This causes confusion, and results in users registering multiple times.       Re: error message "Command Config is not allowed" after registering, posted by Mark Bergman on Wed Feb 15 17:13:08 2012                            Mark Bergman wrote:                                            After registering, elog displays a page with the message:       Re: error message "Command Config is not allowed" after registering, posted by Mark Bergman on Wed Apr 2 19:17:31 2014                            Mark Bergman wrote:                                            After registering, elog displays a page with the message:       Re: error message "Command Config is not allowed" after registering, posted by Mark Bergman on Tue Sep 6 20:09:07 2016    Mark Bergman wrote: After registering, elog displays a page with the message:   Hilight code, posted by Daniel Sajdyk on Tue Sep 6 13:29:03 2016  Hello :) Is there any way to highlight code (for example php, SQL) in logs entries? Best Regards   New elog version 3.1.2, posted by Stefan Ritt on Mon Sep 5 10:31:02 2016  A new version 3.1.2 of elog has been released today and can be retrieved through the normal download section. Since it fixes some vulnerabilities, it is recommended to update to this version. Stefan   Image source url missing, posted by Antonio Bulgheroni on Thu Jul 21 13:08:44 2016  Dear all, sorry for asking you another question, but today after I finally recovered all my logbook entries, I updated to elog 3.1.1 and now I have a problem uploading images. This is what I do:       Re: Image source url missing, posted by Antonio Bulgheroni on Mon Aug 22 10:36:17 2016  Can anyone help me? I'm really clueless             Re: Image source url missing, posted by Stefan Ritt on Mon Aug 22 11:24:07 2016  I entered this image exactly as you described. When I click OK, the dialog disappears. Can you check if it works for you on this server? Maybe with different browsers?             Re: Image source url missing, posted by Antonio Bulgheroni on Mon Aug 22 12:00:32 2016  Dear Stefan, thanks for your answer.  I tried to add a picture to this reply but I got the same error message with both Firefox and Chrome.  For sure the pictures were not included in the message, but I have the feeling they were not even uploaded to the server.                 Re: Image source url missing, posted by Antonio Bulgheroni on Mon Aug 22 17:30:58 2016  Dear Stefan, this is to confirm that also from my personal laptop from home I have the same issue. No pictures uploaded to this server from windows 10.  Which OS & Browser are you using?  thanks,                   Re: Image source url missing, posted by Andreas Luedeke on Mon Aug 22 18:49:48 2016  Okay, I can confirm this bug: with Windows 10 using Firefox 47.0 the dialog hangs as soon as I press "Send it to the server". When it returns, it did not upload anything. That is why it asks for URL after pressing OK. Quick fix: just attach the image and use the URL of the attachment.                      Re: Image source url missing, posted by Antonio Bulgheroni on Mon Aug 22 21:55:14 2016  Thanks Andreas for your contribution and your quick fix. Just a question: how do you get the attachment URL?  Cheers, Antonio                         Re: Image source url missing, posted by Andreas Luedeke on Tue Aug 23 09:05:21 2016  If you go on the attached image with the right mouse button, then you'll get a menu. In this menu there should be some entry like "copy image link" (my PC is unfortunately configured in German, I can't look it up). This copies the URL in the clipboard and you can just paste it in the URL entry of the image button.                            Re: Image source url missing, posted by Antonio Bulgheroni on Tue Aug 23 11:06:49 2016  ok... that was easy. I though there was a ELOG specific way to link to attachments. (my computer is also in German :) Andreas                      Re: Image source url missing, posted by Antonio Bulgheroni on Mon Aug 22 22:09:14 2016  Andreas, there is something strange. It looks the problem is "configuration dependent" because I tried to upload a picture on the Linux Demo logbook and there it works. Can you confirm this too?  Andreas                         Re: Image source url missing, posted by Andreas Luedeke on Tue Aug 23 09:01:08 2016  Yes, I can confirm that the image button upload does work in the Linux Demo logbook (Windows 10 client host, Firefox 47.0 client) and it still does not work in this Forum. Antonio                            Re: Image source url missing, posted by Antonio Bulgheroni on Thu Sep 1 08:47:55 2016  This is another piece of information to help in the debugging. To my standards logbooks, I have added the "demo". On the demo I can upload pictures while I can't on the other logbooks. This is indicating that the bug has something to do with the logbook configuration other than with the editor or the image upload plugin.                               Re: Image source url missing, posted by Antonio Bulgheroni on Thu Sep 1 09:03:51 2016  The conflicting option is "Preview attachments". When this is turned off (set to 0), images are not properly uploaded. Could you please confirm it also on your side? Antonio   Wrong time in attachment "Uploaded ..." date, posted by Andreas Luedeke on Wed Aug 31 10:31:19 2016  When an attachment is later added to an exisiting entry, we see that the string "Uploaded <date>" has the wrong time: in our case it is one hour into the future. I'm testing it now here in the forum.   elog client cmd line submission of attributes with spaces., posted by Darren Hollinrake on Fri Aug 19 19:39:50 2016  I was setting of a local test copy of my logbooks on my Windows 7 PC to begin testing automation of submissions without spamming the live logbooks. While trying to make entries from the command line I get an error that I am missing a required attribute. I have multiple attributes that have spaces in them an the verbose output indicates that the space in the name is being changed to an underscore. Is this the expected behavior or a bug when submitting to       Re: elog client cmd line submission of attributes with spaces., posted by Rudy Taraschi on Fri Aug 19 22:43:21 2016  Try commenting out the Required Attributes line in your elogd.cfg file before submitting. I think it's a bug but this work-around gets around it.           Re: elog client cmd line submission of attributes with spaces., posted by Darren Hollinrake on Thu Aug 25 18:32:13 2016  Thanks for the response. You are indeed correct that the issue disappears when I comment out my required attributes line. If I just remove my "Start Time" attribute, all the other attributes work as well.             Re: elog client cmd line submission of attributes with spaces., posted by Rudy Taraschi on Thu Aug 25 18:45:48 2016  [quote="Darren Hollinrake"]Thanks for the response. You are indeed correct that the issue disappears when I comment out my required attributes line. If I just remove my "Start Time" attribute, all the other attributes work as well.[/quote] I used to just comment out that one field in Required Attributes as well, but it was a pain to edit the CFG file, so I took the lazy approach and just                Re: elog client cmd line submission of attributes with spaces., posted by Darren Hollinrake on Thu Aug 25 19:04:11 2016  Agreed, I just wanted to clarify for anyone else though that the issue seems to be centered on my "Start Time" attribute which is a datetime field. All the other attributes (with spaces) allowed submission of the entry so long as the "Start Time" attribute wasn't set to required. That appears to be the one with the actual issue. Giving a valid epoch time when that field isn't required allows the field to be populated correctly. However, if the "Start       Re: elog client cmd line submission of attributes with spaces., posted by Andreas Luedeke on Sat Aug 20 12:17:10 2016  If the "Start Time" attribute is of the type "datetime", then you cannot assign a date string to it. Instead you'll have to assign the seconds of the epoch. Try assigning a "0", that should be the 1st of January 1970.          Re: elog client cmd line submission of attributes with spaces., posted by Darren Hollinrake on Thu Aug 25 18:18:57 2016  Thanks for the reply. You're correct that the "Start Time" attribute is a datetime field. I tried your suggestion and placed "0" for that field but it still returns the same error: Error: Missing required attribute "Start Time" I tested after commenting out the required attribute line and the command was accepted. However, the datetime field does not display a valid date/time   Quick Filter not searching on Enter, posted by Alan Grant on Wed Aug 10 16:46:09 2016  With all of our instances of Elog where we have Quick Filters enabled, any filter that we input characters into does not search the server when we press enter (there is no "Search" button). Interestingly, it will only search when we click anywhere on a blank area of the Elog interface. Is that the intended procedure for searching?       Re: Quick Filter not searching on Enter, posted by Andreas Luedeke on Thu Aug 11 09:18:27 2016  I've checked for this forum logbook, and pressing "enter" while having focus in the quickfilter text field does initiate the search. Does it work for you with this logbook? Alan          Re: Quick Filter not searching on Enter, posted by Alan Grant on Thu Aug 11 16:40:47 2016  Yes it works fine in this forum. I also discovered my problem is resolved using Chrome. I'll dig into browser and let you know when I find something.              Re: Quick Filter not searching on Enter, posted by Alan Grant on Thu Aug 11 17:09:47 2016  Found the problem. I needed to turn on Compatibility View in IE for the site. Regards. Alan Grant wrote: Yes it works fine in this forum.   Quick Filter not searching, posted by Alan Grant on Wed Aug 10 15:40:49 2016  With all of our instances of Elog where we have Quick Filters enabled, any filter that we input characters into does not search the server when we press enter (there is no "Search" button). Interestingly, it will only search when we click anywhere on a blank area of the Elog interface. Is that the intended procedure for searching?   Sample of actual elog Config with URL in SSL, posted by Dawang on Mon Dec 14 04:42:04 2015  HI Guys, Can you please give me an idea how will I write in the config. I want my elog will be accessed via internet. Though there's a tutorial / guideline, I need an actual config file for me to easily grasp how the URL = xxx should be write. Do my port should be Port = 433 and SSL=1?       Re: Sample of actual elog Config with URL in SSL, posted by Andreas Luedeke on Wed Dec 16 09:56:09 2015  You normally don't need to specify "URL = xxx" at all. It is only needed if you work with a Proxy that changes the normal ELOG URL. And yes, you'll need "Port = 433" and "SSL =1". And elogd must be compiled with USE_SSL=1, maybe that's your problem?          Re: Sample of actual elog Config with URL in SSL, posted by Chris Smyth on Thu Aug 4 16:40:14 2016  how do I compile elogd with USE_SSL=1? Andreas Luedeke wrote: You normally don't need             Re: Sample of actual elog Config with URL in SSL, posted by Andreas Luedeke on Thu Aug 4 21:53:37 2016  Very easy: uncomment the line USE_SSL=1 in the Makefile and then compile. You'll need of course a gcc compiler on your Windows system, a makefile environment, SSL libraries, etc.. If you don't have that: ask you local administrator.                Re: Sample of actual elog Config with URL in SSL, posted by Chris Smyth on Tue Aug 9 04:23:07 2016  By the Makefile i belive you are refering to the elogd.cfg? if not what file do I have use? I have added port = 443                   Re: Sample of actual elog Config with URL in SSL, posted by Andreas Luedeke on Tue Aug 9 14:01:04 2016  You need to download the source file package of ELOG and compile it. If you don't know what a Makefile is, then it is likely futile for you to attempt to compile ELOG. Or in other words: you cannot use SSL.                   Re: Sample of actual elog Config with URL in SSL, posted by Andreas Luedeke on Tue Aug 9 14:08:20 2016  You've already named your solution: drop the very old ELOG version and download the new one. Obviously it was compiled with USE_SSL and you can use it right away. Since you probably don't even have the source files of the old version, you'll have no chance to make it work with that. Just use ELOG   SSL, posted by Chris Smyth on Thu Aug 4 14:28:18 2016  How do I enable SSL with port 443 in version ELOG V2.7.8-2294 and rename from localhost? Server is running Windows 2008   inserting pictures into a post, posted by d. nettles on Wed Jul 17 23:46:01 2002  does elog have a way of inserting pictures into a post other than including them as an attachment? i can put a picture in using html text, but this method only works if the picture is stored on the local server. anyone       Re: inserting pictures into a post, posted by Stefan Ritt on Tue Jul 23 09:21:38 2002  > does elog have a way of inserting pictures into a post other than  including > them as an attachment? i can put a picture in using html text, but  this > method only works if the picture is stored on the local server. anyone          Re: inserting pictures into a post, posted by JD on Fri Jul 22 09:58:47 2016  I know this thread is realy old. Anyways I would like to give a +1 on this request.  As a workaround I currently wrote a small PHP Image Hosting/Upload Script and embedded a link to it in the Menue.  On that page the user uploads the image and gets a link which he/she can embedd using the              Re: inserting pictures into a post, posted by Stefan Ritt on Fri Jul 22 10:08:13 2016  I don't know if you realized, but that (veeeeery old) wish has been implemented about five years ago or so. Now you can instert pictures into the body like this:                Re: inserting pictures into a post, posted by JD on Fri Jul 22 10:27:09 2016  Wow, now me managed it as well ;).. We uploaded/droped the image in the attatchment and not into the text area.  Thank you! Cheers Jonathan                Re: inserting pictures into a post, posted by Antonio Bulgheroni on Fri Jul 22 13:56:06 2016  I have just made a fresh installation of ELOG 3.1.1 on a windows machine and unfortunately it is not working. If I try to insert a picture with the image button, the dialog complains that the image url is missing. If I drag-and-drop the picture on the edit area, it gets attached but not added as picture. I tried already on two different computer and on the basic elog configuration.   Different logbook files when running elogd as admin or normal user, posted by Antonio Bulgheroni on Thu Jul 21 07:44:04 2016  Dear all, I have a problem with my window elog installation (2.9.2) and I would like to ask your help for solving it. I'm using elog on my lab computer for a single user installation, so something very simple. It was running smoothly for many months using the automatic window service (i.e. elogd was started automatically at boot). I need to add that the service is started as the local administrator, while       Re: Different logbook files when running elogd as admin or normal user, posted by Stefan Ritt on Thu Jul 21 08:08:07 2016  I don't know why elogd uses different logbook directories depending on the user. Maybe you start it in different directories, or one user cannot read the config file and falls back to some default. Anyhow, you can start elogd interactively wit the -v flag which tells you which logbook files are parsed. There are no cache files or similar, everything is stored in Yymmdda.log files, you just have to search for them.          Re: Different logbook files when running elogd as admin or normal user, posted by Antonio Bulgheroni on Thu Jul 21 09:37:47 2016  So I found the my log files, but this issue should probably be documented. When running as admin my logbook files are where they should (C:\Program Files (x86)\ELOG\logbooks) When running as local user (with no admin rights), elogd has no writing access to the logbooks directory. So it falls back to use C:\Users\[MyUserName]\AppData\Local\VirtualStore\Program   string length limit in url tag, posted by Don on Wed Jul 20 16:03:24 2016  What is the string length limit in url tag and how to increase it? For example, [url=http://example.com?<text_string>]click here[/url]       Re: string length limit in url tag, posted by Andreas Luedeke on Thu Jul 21 06:15:44 2016  Several strings in ELOG are limited to 256 chars. It is likely the limit for URLs, too. The magic number "256" appears 285 times in the elogd.c file. It is probaly easier if you compress long URLs with goo.gl Cheers, Andreas Don wrote:   Escape character [ or ] doesn't work within [url], posted by Don on Fri Jul 15 19:46:26 2016  Here is the problem: [url=http://example.com?arrays[]=v1&arrays[]=v2]click here[/url] How can I escape [] inside url tag?       Re: Escape character [ or ] doesn't work within [url], posted by Andreas Luedeke on Mon Jul 18 23:37:22 2016  The URL encoding of ']' as '%5D' appears to work: [url=http://example.com?arrays[%5D=v1&arrays[%5D=v2]click here[/url] Cheers, Andreas          Re: Escape character [ or ] doesn't work within [url], posted by Don on Tue Jul 19 21:08:08 2016    Andreas Luedeke wrote: The URL encoding of ']' as '%5D' appears to work:   Email report has incorrect pictures, posted by Austin Reid on Tue Jul 12 21:23:13 2016  My group uses the precompiled Debian binary, and I use ELCode to format my log reports. (I've found it to be the easiest way to generate inline images) Yesterday, I submitted an entry that renders correctly on the elog itself, but the email report that was sent to my collaborators was quite confusing,   Using Reply option, posted by Jason S on Tue Jul 12 16:18:46 2016  Forgive me I'm not incredibly Elog savy yet. A little backround about this log book -  I have our log set up as individual user names.  The log book is designed for entrys to be made when a process shutdown needs to be bypassed.  The operator will create an entry and submit it.  Then a supervisor will come in after       Re: Using Reply option, posted by Andreas Luedeke on Tue Jul 12 19:39:04 2016  Preset on reply Author = $long_name Cheers, Andreas Jason          Re: Using Reply option, posted by Jason S on Tue Jul 12 20:53:03 2016  Works Great. Thanks Andreas Andreas Luedeke wrote: Preset on reply Author   Multiple outcomes to a conditional attribute, posted by Sofian Jafar on Tue Jul 12 08:06:36 2016  Hi, First of all, thanks for all the great work, we all thank you here at SESAME synchrotron        Re: Multiple outcomes to a conditional attribute, posted by Andreas Luedeke on Tue Jul 12 08:31:37 2016  Hi Sofian, it should work like this: Options Type = Fault{1}, Test{2}, Report{3}          Re: Multiple outcomes to a conditional attribute, posted by Sofian Jafar on Tue Jul 12 09:15:35 2016  Thanks Andreas, Works great. I tried reading the documentation on this but I was not able to deduce this solution.       Re: Multiple outcomes to a conditional attribute, posted by Stefan Ritt on Tue Jul 12 08:37:42 2016  What about this: Options Type = Fault{1}, Test{2}, Report{3} {1} Options Fault Status = Open{a}, Fixed{b}   More than 100 attributes , posted by JD on Wed Jun 29 16:07:32 2016  I am modifying the elogd.cfg automatically with a script.  The Script fetches a list of systems from a LDAP database and writes them into an "Options" line in the elog.cfg. Everything worked fine, until we hit the critical number of 100 attributes.  I saw this is also stated in the manual.       Re: More than 100 attributes , posted by Stefan Ritt on Wed Jun 29 16:58:15 2016  The limit is in the variable  #define MAX_N_ATTR      100 in elogd.c. If you increase it and recompile, it could work, but at some time you will get a stack overflow since arrays with that size are dynamically          Re: More than 100 attributes , posted by JD on Thu Jun 30 14:00:43 2016  Thank you Stefan, I think then I will leave it at the default value.  I need a stable Systen Stefan Ritt wrote: The limit is in the variable    Unable to set a custom logbook dir on Debian 8 from the repository package, posted by S. Caiazza on Tue May 31 20:03:53 2016  Dear all I installed elog from the current stable repository on Debian 8 (jessie) The installation went on smoothly, I modified the configuration files of the Apache server as described in the manual to use the elog in parallel       Re: Unable to set a custom logbook dir on Debian 8 from the repository package, posted by Stefan Ritt on Mon Jun 27 16:06:55 2016  The debian version of elog is pretty old with quite a number of bugs fixed in meantime. Unfortunatlely the debig packase has not bee updated by the maintainers. So better download the current version from bitbucket and compile elogd yourself. S.   Hide blank fields when displaying logbook entry, posted by Rudy Taraschi on Thu Jun 23 15:57:34 2016  Hi, I have a logbook with attributes Tool1, Tool2, and Tool3.  When viewing a completed entry, what I want to do is see Tool2 or Tool3 only if they are non-zero, and don't want to see them if blank.  Basically, a "Hide if blank" option.  I couldn't find it - if it doesn't exist, are there any tricks to simulate it?   pdf thumbnails in latest Imagemagick, posted by John Haggerty on Mon Jun 6 05:51:44 2016  I think with the latest Imagemagick from brew (6.9.4-7) that pdf thumnails no longer get made; the attachment is there but the message "Cannot create thumbnail, please check ImageMagick installation" apears instead of the thumbnails.  I couldn't make out from elogd -v 3 why they failed, but I couldn't make out the exact convert command that was failing.  This is on MacOS 10.11.5 and I think the updated version       Re: pdf thumbnails in latest Imagemagick, posted by Stefan Ritt on Tue Jun 21 16:33:56 2016  Hi John, I use ImageMagick 6.9.3-10 on my Mac OSX 10.11.5 and it works fine. So apparently the parameters of the ImageMagick program have been changed. If you set the logging level to 2 or higher, you should see the "convert" and "identify" commands in the logging file. If you try these          Re: pdf thumbnails in latest Imagemagick, posted by John Haggerty on Tue Jun 21 16:44:05 2016    Stefan Ritt wrote: Hi John,   cannot use "use email heading", posted by utomoadji wisnubroto on Tue Jun 14 07:51:37 2016  Hello, i have config file elogd.cfg like below:       Re: cannot use "use email heading", posted by Stefan Ritt on Tue Jun 14 14:33:40 2016  The setting Use Email Heading is only used for plain text encoding of email messages. The default is HTML encoding, which has its own heading which cannot be changed. If you          Re: cannot use "use email heading", posted by utomoadji wisnubroto on Wed Jun 15 02:42:53 2016  Hi Stefan, Thanks for your reply, i got it now. Thank you   Guest menu commands not working as advertisted, posted by Greg Christian on Tue Jun 14 16:50:41 2016  Hello, I am trying to set up my elog to have read-only guest access and require registration/password for users to be able to post to the elog. I've tried following the instructions here: https://midas.psi.ch/elog/faq.html#6, i.e. putting the following       Re: Guest menu commands not working as advertisted, posted by Stefan Ritt on Tue Jun 14 17:01:04 2016  There are two menus, one for the list display, and one for the individual entry display. To change the first, you need List menu commands = ... Guest list menu commands = ...          Re: Guest menu commands not working as advertisted, posted by Greg Christian on Tue Jun 14 18:32:03 2016  Got it. Thanks! Stefan Ritt wrote: There are two menus, one for the list display, and one for the individual   Self register = 0 not working , , posted by rudy on Wed Jun 8 15:00:47 2016  I have Split Elog to Two Top Group [Check the Config Below]. Problem =  After Staff01 login successfully to http://127.0.0.1/Staff and if he/she fill the url http://127.0.0.1/Administrator and choose any elog       Re: Self register = 0 not working , , posted by Andreas Luedeke on Wed Jun 8 16:01:11 2016  It would be new to me if elog would support independent [global] sections for each logbook. I thought you can only have one [global] section. Whatever is defined in that section will be valid for all logbooks. If you need to have different user files, you'll need to run different elogd services with independent config files (and Password files).          Re: Self register = 0 not working , , posted by rudy on Wed Jun 8 17:08:56 2016  Hi Andreas I'm following the instruction from https://midas.psi.ch/elog/config.html#groups , please scroll to the Top Groups Group Linux PCs = Red Hat, Debian, Mandrake Group Windows PCs = 98, ME, NT, XP, CE Group CE = 1.0, 2.UL Top group engineering = Linux             Re: Self register = 0 not working , , posted by Andreas Luedeke on Wed Jun 8 18:49:28 2016  Aparently I've missed that one :-) In order to test your problem it would be useful to have a minimal config file to reproduce the problem. Yours does not include any actual logbook, only [global *] sections.                Re: Self register = 0 not working , , posted by rudy on Thu Jun 9 04:29:14 2016  Hi Andreas,  Thanks for your help. I will try to do that and if I found how to fix this problems, I will post it at here again. Andreas   pdf thumbnails in latest Imagemagick, posted by John Haggerty on Mon Jun 6 05:45:57 2016  I think with the latest Imagemagick from brew (6.9.4-7) that pdf thumnails no longer get made; the attachment is there but the message "Cannot create thumbnail, please check ImageMagick installation" apears instead of the thumbnails.  I couldn't make out from elogd -v 3 why they failed, but I couldn't make out the exact convert command that was failing.  This is on MacOS 10.11.5 and I think the updated version   elogd dies upon search, posted by Christian Ludwig on Fri Jun 3 08:16:31 2016  Hi all, ELOG V3.0.0-21dc563 Our elogd dies alwways when searching for full text:       solved: elogd dies upon search, posted by Christian Ludwig on Fri Jun 3 08:59:49 2016  I would like to share my findings about the solution of our problem: One of my collegues used elog in a way it was not intended for, he put an endry with 8021 lines of text. So I grabbed the corresponding 160517a.log file from logdir, renamed it to a text file and created a new entry with the large textfile as attachment.   Unable to set a custom logbook dir on Debian 8 from the repository package, posted by S. Caiazza on Tue May 31 19:53:59 2016  Dear all I installed elog from the current stable repository on Debian 8 (jessie) The installation went on smoothly, I modified the configuration files of the Apache server as described in the manual to use the elog in parallel   elog service crashes frequently, posted by Stan Turner on Sun May 22 04:05:12 2016  We have always had issues with eLOG crashing intermittently...  I upgraded from Server 2003 to Server 2008 about a year ago to try to reduce the issues...  which really didn't help. The service now seems to crash every week...  (getting worse)...  Is anyone seeing these issues in Windows servers?  Any suggestions??       Re: elog service crashes frequently, posted by Andreas Luedeke on Sun May 22 11:56:21 2016  We do run ELOG on a Linux server and see about weekly crashes, too. It seems to be connected to the authentication process (Kerberos, File), but we could not nail it down yet. But we have set up a supervision process that checks every minute if the "elogd" process is still running. If not, it simply restarts   support "authentication = webserver, kerberos", posted by Devin Bougie on Wed May 18 16:19:07 2016  The elog client binary does not work with webserver authentication.  One fix would be to support both webserver and kerberos authentication (authentication = webserver, kerberos), similar to how you currently support  "authentication = kerberos, file".   elog client binary with webserver authentication, posted by Devin Bougie on Wed May 11 02:59:53 2016  Is it possible to submit entries using the elog client binary when the server is configured with webserver authentication (when the server requires the X-Forwarded-User header)?  One option would be if the server could support both webserver and kerberos (or even file) authentication, but neither  "Authentication = Webserver, Kerberos" nor "Authentication = Webserver, File" seem to work.   Merge duplicate types, posted by John Mund on Fri May 6 16:19:10 2016  Hello, We have accumulated some duplicate 'types' in one of our logbooks.  Is it possible to merge them? Thanks,       Re: Merge duplicate types, posted by Andreas Luedeke on Fri May 6 22:30:56 2016  I'm not sure I understand your question correctly. If you want to remove options from an extendable option attribute, then you can just edit the logbook configuration file. John   Trouble with Find and Conditional attributes, posted by Adam Fairbrother on Thu Apr 28 22:38:00 2016  I seem to be having some trouble with Find when using conditional attributes. when I change the primary attribute in the find field, the corrispnding secondary attribute dosn't refresh properly with the list of values. I am able to use the conditional options as expected when creating a new logbook.       Re: Trouble with Find and Conditional attributes, posted by Adam Fairbrother on Thu Apr 28 22:54:08 2016  This may be due to how I have my config file setup Example: Attributes = A, B          Re: Trouble with Find and Conditional attributes, posted by Adam Fairbrother on Fri Apr 29 20:37:04 2016  Uppon closer inspection, removing the option to preset the secondary attribute as a Option list dosn't do anything for the find page. This: Attributes = A, B   How to delete a logbook?, posted by steve bray on Thu Apr 28 16:45:41 2016  Hello, What is the procedure to delete a logbook (incl. attachments)?         Re: How to delete a logbook?, posted by Stefan Ritt on Fri Apr 29 11:45:51 2016  Deleting a logbook in the config page (via "Delete this logbook") only removes the logbook defiition from the config file. To really erase all information you have to go to the file system and delete the whole directory belonging to that logbook. You have one subdirectory per year, containing all logobok entries and also attachments, so make sure you do a recursiver directory removal.          Re: How to delete a logbook?, posted by steve bray on Fri Apr 29 13:36:49 2016  Stefan, Thank you that is exactly what I needed to know. Steve   How to enforce line breaks in plain text entries?, posted by Andreas Luedeke on Wed Apr 27 14:07:52 2016  We use ELOG for our accelerator operation logbooks. As part of the shift handover every shift prints out all entries made during the shift and files the printouts. If one entry in the shift was plain text without appropriate linebreaks (like this one), then this screws up the printout: the whole window is scaled to the width       Re: How to enforce line breaks in plain text entries?, posted by Andreas Luedeke on Wed Apr 27 14:15:19 2016  > We use ELOG for our accelerator operation logbooks. As part of the shift handover every shift prints out all > entries made during the shift and files the printouts. If one entry in the shift was plain text without > appropriate linebreaks (like this one), then this screws up the printout: the whole window is scaled to the          Re: How to enforce line breaks in plain text entries?, posted by Andreas Luedeke on Wed Apr 27 14:36:42 2016  > > We use ELOG for our accelerator operation logbooks. As part of the shift handover every shift prints out all > > entries made during the shift and files the printouts. If one entry in the shift was plain text without > > appropriate linebreaks (like this one), then this screws up the printout: the whole window is scaled to the          Re: How to enforce line breaks in plain text entries?, posted by Stefan Ritt on Wed Apr 27 14:39:28 2016  > > We use ELOG for our accelerator operation logbooks. As part of the shift handover every shift prints out all > > entries made during the shift and files the printouts. If one entry in the shift was plain text without > > appropriate linebreaks (like this one), then this screws up the printout: the whole window is scaled to the   How to login and export to CSV using wget?, posted by Alan Grant on Sun Apr 24 02:09:47 2016  Is it possible to use wget to log into elog and export all of a logbook's data into a CSV file? I can accomplish this perfectly when authentication IS NOT required by using:  wget --no-check-certificate -O e:\export.csv http://localhost:8080/demo/?mode=CSV1 However, I cannot accomplish it when authentication IS required by using:  wget --no-check-certificate -O e:\export.csv "http://localhost:8080/demo/?mode=CSV1&uname=agrant&upassword=skipper"       Re: How to login and export to CSV using wget?, posted by Alan Grant on Sun Apr 24 06:49:33 2016  UPDATE: After days of head banging and trying different syntax combinations, I finally stumbled on my own answer. It involved some syntax adjustments, and then splitting the task into these two consecutive operations:   Send email based on lookup of an attribute, posted by Rudy Taraschi on Thu Mar 31 16:31:45 2016  I'm trying to send an email based on an attribute, in other words, a lookup and not $user_email of the author. For instance, if I set a an attribute "Assignee" with a valid user full name (i.e. John Smith), I'd like to look up John Smith's        Re: Send email based on lookup of an attribute, posted by Stefan Ritt on Mon Apr 4 14:09:42 2016  > I'm trying to send an email based on an attribute, in other words, a lookup and not $user_email of the author. >  > For instance, if I set a an attribute "Assignee" with a valid user full name (i.e. John Smith), I'd like to look up John Smith's    Preloading Options or Moptions from a text file or CSV, posted by Francois Cloutier on Wed May 6 21:25:34 2015  Title says all :) Is it possible to preload Options or Moptions from a text file or CSV instead of being load from the elogd.conf ?       Re: Preloading Options or Moptions from a text file or CSV, posted by Stefan Ritt on Wed May 6 21:30:13 2015  > Title says all :) >  > Is it possible to preload Options or Moptions from a text file or CSV instead of being load from the elogd.conf ?          Re: Preloading Options or Moptions from a text file or CSV, posted by Francois Cloutier on Thu May 7 02:25:16 2015  > > Title says all :) > >  > > Is it possible to preload Options or Moptions from a text file or CSV instead of being load from the elogd.conf ?             Re: Preloading Options or Moptions from a text file or CSV, posted by Stefan Ritt on Thu May 7 09:48:32 2015  Forget scripting under Windows, this is painful and not really working. Wrong OS for that. But have you considered conditional attributes? With this you can load different option lists straight from the elogd.cf file. Use something like this:                Re: Preloading Options or Moptions from a text file or CSV, posted by Francois Cloutier on Thu May 7 14:37:39 2015  Not really... The thing is I have to let some users the capacity of changing the content of that option list.. I was hoping there could be a different way for  them then to edit the cfg file...             Re: Preloading Options or Moptions from a text file or CSV, posted by Andreas Luedeke on Mon May 11 22:42:44 2015  > > > Title says all :) > > >  > > > Is it possible to preload Options or Moptions from a text file or CSV instead of being load from the elogd.conf ?       Re: Preloading Options or Moptions from a text file or CSV, posted by Jimmy Bria on Fri Apr 1 18:45:01 2016  > Title says all :) >  > Is it possible to preload Options or Moptions from a text file or CSV instead of being load from the elogd.conf ?          Re: Preloading Options or Moptions from a text file or CSV, posted by Stefan Ritt on Mon Apr 4 13:59:42 2016  > Did you ever get an answer or figure out how to preload Options from a CSV?   Read Validation, posted by Ed Strohak on Sat Apr 2 12:43:17 2016   I'm looking for config examples of a shift log book where operators have to check a box or select their name from a list to prove they have read the latest entries in the log, can anyone help.         Re: Read Validation, posted by Stefan Ritt on Sat Apr 2 17:56:04 2016  Unfortunately a read confirmation is not foreseen in the Elog system. You would have to define one attribute for each shift worker, like "John has read", "Steve has read" and so on. Then each of the shift workes has to "Edit" each message an check his/her checkmark manually. Stefan          Re: Read Validation, posted by David Pilgram on Sat Apr 2 21:21:04 2016  As a variant of what Stefan has suggested: Perhaps a simple comment is set up as the pre-loaded reply - perhaps including date and time.  Maybe include the author's name in the comment, but all that is available anyway (see documentation for that).  This bit isn't vital.             Re: Read Validation, posted by Ed Strohak on Mon Apr 4 13:05:55 2016  Appreciate the help.. Thanks David   URL, posted by Neal Grafton on Tue Mar 15 09:26:40 2016  Hi Can I asign a URL to a Radio Button to bring up another program?       Re: URL, posted by Stefan Ritt on Tue Mar 22 12:47:50 2016  You can do this by adding manyallty some JavaScript to the page. Neal Grafton wrote: Hi          Re: URL, posted by Neal Grafton on Wed Mar 23 16:01:46 2016  OK thanks Stefan. Thats another programming language I'll have to learn then. :-) The Elog config I am just getting to grips with but Java and Scripts are a bit beyond me.   Width of text field, posted by Edward Diehl on Tue Mar 22 18:28:03 2016  I use a elog which has a text field to show log entries:  https://classis01.roma1.infn.it/elog/calib/     In the "Summary" view there are only 3 lines of about 40 characters shown, so often the entry is cut off even though there is plenty of space in the text box for longer lines.   To see the full entry you must click on the ID number.   Is there any way to configure the Text box to show longer lines?         Re: Width of text field, posted by Andreas Luedeke on Wed Mar 23 11:40:52 2016  Did you try the options Summary lines = x Summary line length = x as documented in https://midas.psi.ch/elog/config.html#flags ?   Installation: Failed Dependencies, posted by Phil Rubin on Fri Mar 11 17:29:47 2016  Is there anything I can do about this? kernel:  2.6.32-279.14.1.el6.x86_64 ldd (GNU libc) 2.12       Re: Installation: Failed Dependencies, posted by Phil Rubin on Fri Mar 11 18:59:30 2016  I attempted instead to build from the tar ball, and, except for a "fatal" git error, make built elogd, elog, and elconv.  I put the first in /usr/local/sbin, and the latter two in /usr/local/bin, and then restarted elogd, but this didn't work: Service Temporarily Unavailable          Re: Installation: Failed Dependencies, posted by Phil Rubin on Fri Mar 11 19:24:11 2016  OK.  I found the source of the logbook problem in an exchange from May 2015, so no need to answer this one. But I would like to be able to upgrade to 3.x from 2.9, so any help with this will be much appreciated. Phil       Re: Installation: Failed Dependencies, posted by Darren Hollinrake on Sat Mar 19 15:24:29 2016  I did the following on CentOS 6.7 (Should work for Fedora and RHEL as well): yum install -y wget wget http://midas.psi.ch/elog/download/RPMS/elog-latest.i386.rpm   upgrade problem, posted by Tim Schelfhout on Tue Mar 15 19:53:55 2016  Hello there, After several years of great ELOG usage I decided to upgrade our ELOG server.  I am using it to keep  a logbook of my students.       Re: upgrade problem, posted by Andreas Luedeke on Wed Mar 16 08:39:55 2016  Hi Tim, starting with ELOG version 3 all entries are moved into sub-directories for each year. If you move the files back from the sub-directories and restart elogd, then the entries should appear again in the logbook with ELOG 2.9.2.   I don't know how to solve your other problem. Maybe you should talk to someone locally who can administer your windows server? Cheers, Andreas     Pre-populate filed based on selection, posted by Jimmy Bria on Mon Mar 14 16:00:02 2016  Hi, Is it possible to pre-populate a field based on the selection of another field. I like to have the Equipment Description field populated when the use makes a selection on the EQ# field.       Re: Pre-populate filed based on selection, posted by Stefan Ritt on Tue Mar 15 03:48:58 2016  Use "conditional attributes" as described in the documentation: https://midas.psi.ch/elog/config.html#conditional Jimmy Bria wrote: Hi,   Installation: Failed Dependencies, posted by Phil Rubin on Fri Mar 11 17:19:02 2016  Is there anything I can do about this? kernel:  2.6.32-279.14.1.el6.x86_64 ldd (GNU libc) 2.12   elogd -m Error sending local entry: Error transmitting message, posted by Dave on Thu Mar 10 00:26:03 2016  I'm running ELOG on a seperate Windows Servers. When I try to synchronize the logbooks using "elogd -m", I get an "Error sending local entry: Error transmitting message" If I click on the "Synchronize" link in the logbook, it can correctly send entry to remote ELOG.   elogd -m , posted by Dave on Thu Mar 10 00:16:33 2016  I'm running ELOG on a seperate Windows Servers. When I try to synchronize the logbooks using "elogd -m", I get an "Error sending local entry: Error transmitting message" If I click on the "Synchronize" link in the logbook, it can correctly send entry to remote ELOG.   Execute new|edit doesn't seem to work, posted by Juergen Diefenbach on Fri Feb 26 17:35:54 2016  I am trying to use the "Execute new|edit|delete" feature to track changes to an elog using git. When a new entry is created a shell script should be executed (certain attributes of the logbook entry should be passed as arguments to it). The script       Re: Execute new|edit doesn't seem to work, posted by Andreas Luedeke on Sun Feb 28 18:24:58 2016  [quote="Juergen Diefenbach"]I am trying to use the "Execute new|edit|delete" feature to track changes to an elog using git. [...] However, I experienced unreproducible behavior when creating "new" entries. Sometimes the command specified by "Execute new=" is called, sometimes the          Re: Execute new|edit doesn't seem to work, posted by Juergen Diefenbach on Mon Mar 7 13:03:13 2016  [quote="Andreas Luedeke"]I'm just guessing, but you could try to disable the "save drafts" feature and see if the behaviour changes: Save drafts = 0             Re: Execute new|edit doesn't seem to work, posted by Andreas Luedeke on Tue Mar 8 14:12:26 2016  [quote="Juergen Diefenbach"][quote="Andreas Luedeke"]I'm just guessing, but you could try to disable the "save drafts" feature and see if the behaviour changes: Save drafts = 0   Attribute Field Size Limited to 255 Characters, posted by Mike Bodine on Thu Mar 3 00:12:45 2016  I currently have an Attribute defined in my .cfg file as  "Format <Attribute> = 0, attribname, attribvalue, 120, 500". I've found if I exceed 255 characters elogd.exe fails. Is there a method that will allow me to exceed 255 characters?       Re: Attribute Field Size Limited to 255 Characters, posted by Andreas Luedeke on Thu Mar 3 14:51:55 2016  No. At least there is no simple method. You would need to edit the source code and recompile elogd. But the number 256 is used for about 300 times in the source code, you'll have a hard time finding the right one to increase.   Attribute Field Size Limited to 255 Characters, posted by Mike Bodine on Thu Mar 3 00:02:26 2016  I currently have an Attribute defined in my .cfg file as  "Format <Attribute> = 0, attribname, attribvalue, 120, 500". I've found if I exceed 255 characters elogd.exe fails. Is there a method that will allow me to exceed 255 characters?   Links to images in notification message, posted by Devin Bougie on Fri Feb 26 17:20:52 2016  We see two problems with the notificaiton email when attaching an image inline using drag-and-drop. The thumbnail does not appear in its proper location inline.  There is a ? placeholder where the thumbnail should be, and the thumbnail then appears at the end of the message. Neither the ? placeholder nor the thumbnail that do appear are clickable. Our       Re: Links to images in notification message, posted by Devin Bougie on Fri Feb 26 18:11:14 2016  From the notification I received, it looks like "2" is a problem with this server.  In the email notification, we would like images to be a link to a URL displaying the full-size image (as they are in v2.9.2). Thanks,   Possible bug in elogd execute_shell, posted by Nigel Warr on Fri Feb 26 08:47:22 2016  I was just playing around with gcc6's new feature for warning about misleading indentation (which can often hide real bugs) and I think it found one in elog-3.1.1-1 at src/elogd.c:22538. Here there is an if statement, which looks as though it should be inside a loop, but it isn't. The code is:       Re: Possible bug in elogd execute_shell, posted by Stefan Ritt on Fri Feb 26 09:09:03 2016  Absolutely correct! Nice to see compilers getting better and better. I changed the code and committed it. Nigel Warr wrote: I was just playing around with gcc6's new feature for warning about   Possible bug in elogd execute_shell, posted by Nigel Warr on Fri Feb 26 08:38:06 2016  I was just playing around with gcc6's new feature for warning about misleading indentation (which can often hide real bugs) and I think it found one in elog-3.1.1-1 at src/elogd.c:22538. Here there is an if statement, which looks as though it should be inside a loop, but it isn't. The code is:   Kerberos auth not available on 3.0 ?, posted by Maikolk Kein on Mon Jan 26 10:30:40 2015  Hi all !!!   i have just updated and 2.9.2-1 elog instance, and i have problems with the kerberos configuration.       Re: Kerberos auth not available on 3.0 ?, posted by Andreas Luedeke on Mon Jan 26 15:04:38 2015  Hi Maikolk, I have elogd 3.0 running with kerberos: I had no problems with that. Maybe you forgot to change the Makefile before compiling? Uncomment line 28 to: # flag for Kerberos support, please turn on if you need Kerberos USE_KRB5   = 1          Re: Kerberos auth not available on 3.0 ?, posted by Maikolk Kein on Mon Jan 26 15:06:49 2015  No no, i used the rpm form the website... I was thinking on having the bianries compiled, im downloading the server install dvd to replicate the environment and have the same functionality.             Re: Kerberos auth not available on 3.0 ?, posted by Stefan Ritt on Tue Jan 27 17:16:46 2015  Kerberos support is not compiled into the binary RPM. You have to comile from sources to get that. The reason is that there are different Kerberos libraries around, and different people need different ones. /Stefan                Re: Kerberos auth not available on 3.0 ?, posted by Jimmy Bria on Tue Feb 23 22:32:30 2016  Hi Stefan - Do you know is Kerberos is available (compiled) on the Windows installer? -Jimmy Stefan                   Re: Kerberos auth not available on 3.0 ?, posted by Stefan Ritt on Wed Feb 24 09:48:09 2016  Hi Jimmy, no Kerberos is not compiled into the Windows installer. You are the first one asking for that under Windows. All other Kerberos users use Linux so far. You have to compile the Windows version yourelf. This is because there are several versions of Kerberos around and people need differnt libraries. Sorry for that.   Find empty attributes, posted by Arno Teunisse on Tue Feb 16 23:19:31 2016  Want to use the find function from ELOG to search for empty fields ( Attributes that are not defined )  How to do that ?  Could not find it in the Forum.       Re: Find empty attributes, posted by Stefan Ritt on Wed Feb 17 08:18:05 2016  Unfortunately not possible. Stefan Arno       Re: Find empty attributes, posted by Andreas Luedeke on Wed Feb 17 18:08:53 2016  It is possible for normal string attributes: the regular expression pattern "^$" can be used to search for an empty string. E.g. in this Forum "ELOG Version" is a required attribute, and should never be empty. But if you search for: https://midas.psi.ch/elogs/Forum/?mode=threaded&reverse=0&reverse=1&npp=8&ELOG+Version=^%24 you'll find a couple of entries from a time where it apparently wasn't a required attribute. Cheers Andreas          Re: Find empty attributes, posted by Stefan Ritt on Wed Feb 17 18:33:18 2016  Cool, I didn't know that trick myself, thanks for sharing. Andreas Luedeke wrote: It is possible for normal string attributes: the regular expression   size of atributes in summary mode, posted by Diego on Wed Feb 10 22:55:42 2016  Good night, I would be grateful if someone could indicate me, how could I increase the size of the block where the text of the atribute are in the summary mode.I would like, for example, increase the size of the "subject" you can see on the picture.       Re: size of atributes in summary mode, posted by Diego on Wed Feb 10 23:44:38 2016  I answer myself... Modify the value of width=100% in the class .listtitle2 in the .css file. Diego wrote: Good night,   New entry cannot be written to directory "/usr/local/elog/logbooks/demo/", posted by Tapasi Ghosh on Mon Feb 8 13:52:33 2016  Dear All, I could not submit a new enetry to my logbook whenever restarting my laptop.  I am a new user to elog. Attached is the screenshot of the error message and also there is "nobody" while I grep elog.       Re: New entry cannot be written to directory "/usr/local/elog/logbooks/demo/", posted by Andreas Luedeke on Mon Feb 8 15:07:05 2016  You should check if the directory /usr/local/elog/logbooks/demo belongs to the right user and has the right write permissions. Since the elogd process belongs to the user "nobody", the directory should best belong to "nobody" as well (or - not recommended - allows write access for "others")          Re: New entry cannot be written to directory "/usr/local/elog/logbooks/demo/", posted by Tapasi Ghosh on Mon Feb 8 16:19:11 2016  Thanks for your reply. I am the user and  it also has the write access  cd /usr/local/elog/             Re: New entry cannot be written to directory "/usr/local/elog/logbooks/demo/", posted by Andreas Luedeke on Mon Feb 8 16:27:45 2016  The process elogd runs as the user "nobody". This user obviously cannot write to /usr/local/elog/logbooks/demo. But apparently you've created the wrong directory anyway: you've listed /usr/local/elog/demo, but ELOG looks for /usr/local/elog/logbooks/demo. Cheers, Andreas                Re: New entry cannot be written to directory "/usr/local/elog/logbooks/demo/", posted by Tapasi Ghosh on Mon Feb 8 17:40:27 2016  Sorry, it was my mistake while copying  from terminal to the email .  There is no "demo" directory under /usr/local/lib. Tapasis-MacBook-Pro:elog tapasi$ cd  /usr/local/elog/logbooks/demo Tapasis-MacBook-Pro:demo tapasi$ ls -ltr                   Re: New entry cannot be written to directory "/usr/local/elog/logbooks/demo/", posted by Stefan Ritt on Mon Feb 8 19:29:47 2016  Use usr = <user anme> in elogd.cfg as written in the documentation.   Applying cell style or some sort of subst in list view only, posted by Francois Cloutier on Thu Feb 4 14:21:19 2016  Good day, I have an attribute that is 25 chars. it can be empty until someone edit it to fill the information.       Re: Applying cell style or some sort of subst in list view only, posted by Stefan Ritt on Thu Feb 4 14:47:50 2016  > Good day, >  > I have an attribute that is 25 chars. it can be empty until someone edit it to fill the information.       Re: Applying cell style or some sort of subst in list view only, posted by Andreas Luedeke on Thu Feb 4 15:07:07 2016  > Good day, >  > I have an attribute that is 25 chars. it can be empty until someone edit it to fill the information.   Can I host elog in the web under windows platform without Apache Web Server?, posted by Dawang on Fri Jan 15 00:20:42 2016  Hi All, Can I host elog in the web (internet) under windows platform (elogd.exe only) without Apache Web Server? If possible, what syntax should I add in the configuration file? Appreciate feedback. Thanks.       Re: Can I host elog in the web under windows platform without Apache Web Server?, posted by Stefan Ritt on Fri Jan 15 08:04:09 2016  When you install elog under windows, an example config file gets installed which lets you do already what you want. Then you can extend the config file according to the documentation https://midas.psi.ch/elog/config.html Dawang       Re: Can I host elog in the web under windows platform without Apache Web Server?, posted by Andreas Luedeke on Fri Jan 15 15:31:54 2016  I admit that I'm not sure if I understood the question. It is quite some work to do the opposite, to run elog behind an Apache Web Server. But if you just install ELOG out of the box it will always run without an Apache Web Server. You don't need to add anything in the config file for that. Dawang wrote:          Re: Can I host elog in the web under windows platform without Apache Web Server?, posted by Dawang on Fri Jan 29 05:38:03 2016  Thanks Andreas and Stefan, Since I'm not good in setting up webserver, do you know a web hosting company that can I use to integrate elog so that i can access my elog publicly same as you are using here? Thanks.             Re: Can I host elog in the web under windows platform without Apache Web Server?, posted by Andreas Luedeke on Fri Jan 29 06:35:05 2016  Can't help you with that, and I think it is the wrong forum to ask that question. You'll need a web service provider that will allow you to run your own services. And then it'll either require some skills in host administration or a full host service by the provider. Cheers, Andreas Dawang   attachments created using "Image" button can not be clicked-on and do not appear in the attachment table., posted by Devin Bougie on Wed Jan 27 21:33:53 2016  This has been confirmed usign the Demo forum on this server.  For example, please see https://midas.psi.ch/elogs/Linux+Demo/8 When an image is attached using the "Image" button in the CKEditor, that image does not appear in the attachment table for that entry.  In addition, the image can not be clicked on to view the full image.       Re: attachments created using "Image" button can not be clicked-on and do not appear in the attachment table., posted by Devin Bougie on Thu Jan 28 20:02:06 2016  As there appears to be some inconsistencies, I thought I'd document the behaviour of each of the attachment options. ------ 1. Click on the "Image" button in the CKEditor, click on "Choose File" and browse to the file, click on "Send it to   entry does not appear in list while it is being edited, posted by Devin Bougie on Wed Jan 20 20:38:17 2016  When an entry is being edited, it does not appear in the list once it's been autosaved or the editor manually clicks on "Save."  This has been reproduced in the "Linux Demo" forum on this site, as well as on a clean installation of the 3.1.1 binary on EL6. It would be great if there was a configuraiton option to control this, but I haven't found it yet.  To reproduce:       Re: entry does not appear in list while it is being edited, posted by Andreas Luedeke on Thu Jan 21 11:39:18 2016  Hi Devin, this is the intended bevaviour, there is nothing wrong with that. Only a submitted entry should be visible to the world. If you would have played a little bit longer, you would have found out yourself how you'll get access again to this so-called "draft" entry after closing the browser window: as soon as you attempt to create - as the same user - an new entry, you'll          Re: entry does not appear in list while it is being edited, posted by Devin Bougie on Thu Jan 21 16:00:30 2016  Thanks, Andreas.  I was aware of the "pending draft" menu, and I am aware that you can manually browse to an entry even if it doesn't appear in the list.  However, for our operations group it is a requirement that any saved entry appears in the list, even if it's in the process of being edited.  We won't be able to upgrade until this is possible.               Re: entry does not appear in list while it is being edited, posted by Stefan Ritt on Fri Jan 22 10:12:33 2016  I have a question here. You say "previsous releases didn't have this problems". Well, they did not have the auto-save feature. You can turn this off if you like with "autosave = 0". This also removes the "Save" button so elog behaves exactly as before. I decided NOT to show draft entries in the list, because these are entries currently under editing, and maybe the editor does not want others                Re: entry does not appear in list while it is being edited, posted by Devin Bougie on Fri Jan 22 18:02:44 2016  Thanks, Stefan!  Yes, the old behavior is an acceptable workaround.  Although you need to use "Save drafts = 0" for this instead of "autosave = 0". Ideally, our machine studies group would like to have the ability to save / autosave an entry *and* have it remain in the list.  We'd   drag and drop attachments not working with web server authentication, posted by Devin Bougie on Tue Jan 12 17:38:52 2016  Hello, The "Drop attachments here..." section does not work when using Webserver authentication.  Both elog 3.1.1 (the binary RPM) and apache are running on EL6.6 and are configured according to the docs.  Authentication works fine and the normal "Choose File - Upload" attachment table works fine.  However, when dragging an attachment to the "Drop attachments here..." section the dashes on the border turn green but when dropping the attachment nothing happens.       Re: drag and drop attachments not working with web server authentication, posted by Stefan Ritt on Tue Jan 12 21:07:59 2016  Have a look here: elog:68014 Devin Bougie wrote: Hello, The "Drop attachments here..." section does not work when          Re: drag and drop attachments not working with web server authentication, posted by Devin Bougie on Tue Jan 12 21:13:54 2016  Thanks, Stefan.  I read that before asking my question, but didn't see a resolution in that thread.  I am already at 3.1.1, and I am testing on a clean installation.  Are you saying that the solution is in the development branch after the release of 3.1.1?               Re: drag and drop attachments not working with web server authentication, posted by Stefan Ritt on Tue Jan 12 21:19:25 2016  No. What the thread says is first try this forum, see if you can drag and drop here. If not, you have a problem on your browser. If yes, you have somewhere some old JavaScript file around. Might be in the cache of your browser. Devin                Re: drag and drop attachments not working with web server authentication, posted by Devin Bougie on Tue Jan 12 21:31:42 2016  Yeah, I had tried that and it did work in your demo forum.  It just didn't work in mine with authentication = webserver, even with a clean browser profile.                     drag and drop attachments only working for admins if "restrict edit = 1", posted by Devin Bougie on Tue Jan 19 22:03:36 2016  I'm finally able to reproduce this, and my initial description was incorrect.  If we have "restrict edit = 1", only an "Admin user" can use the "Dop attachments here..." or the "Image" button in the CKEditor.  The old "Choose File," "Upload" buttons, however, works just fine for anyone.   Monitoring a logbook for changes, posted by Johan Forsberg on Tue Jan 12 15:06:42 2016  Hi again! I've another need that you probably already thought of :) I'd like to be able to efficiently monitor a logbook for changes (new or edited posts) somehow. The most reasonable way I've found so       Re: Monitoring a logbook for changes, posted by Stefan Ritt on Tue Jan 12 16:10:34 2016  Use automatic email notifications or RSS feeds. Read the manual for that. Stefan Johan       Re: Monitoring a logbook for changes, posted by Tamas Gal on Wed Jan 13 08:37:42 2016  I recommend monitoring directly on the server. Here is an example of a very simply Python script (https://github.com/tamasgal/elog-slack) which monitors the files very efficiently and immediately pushes notifications to Slack (slack.com). Just look at the code, it's pretty straight forward and very easy to adapt it to other (web) services.          Re: Monitoring a logbook for changes, posted by Johan Forsberg on Wed Jan 13 10:29:54 2016  Yeah, I suppose something like that would be both faster and more efficient than polling ELOG itself. Fortunately the ELOG disk format looks easily parsed. Thanks for the pointer! Tamas             Re: Monitoring a logbook for changes, posted by Tamas Gal on Wed Jan 13 17:04:34 2016  I just noticed that there are multiple messages per file, so I have to adapt the parser. I'll update this thread when I'm done! Johan Forsberg wrote: Yeah, I suppose something like that would be both faster and more                Re: Monitoring a logbook for changes, posted by Stefan Ritt on Wed Jan 13 17:21:56 2016  You guys know that there is the possibility to execute an arbitrary script on each submission of a new messge? Just use "Execute new = <script>". In the script you have access to all parameters of the message. That's maybe simple than to watch the file set. Tamas                   Re: Monitoring a logbook for changes, posted by Tamas Gal on Wed Jan 13 18:37:32 2016  Where is this feature documented? Stefan Ritt wrote: You guys know that there is the possibility to execute an arbitrary                      Re: Monitoring a logbook for changes, posted by Stefan Ritt on Wed Jan 13 19:08:09 2016  In the documentation of course :-) Tamas Gal wrote: Where is this feature documented?                         Re: Monitoring a logbook for changes, posted by Tamas Gal on Wed Jan 13 19:13:47 2016  I'm probably too tired or I don't know, but of course I looked at the user's guide and the admin's guide but did not found anything about this ;-) Is there another documention which I missed somehow? Stefan                            Re: Monitoring a logbook for changes, posted by Stefan Ritt on Wed Jan 13 19:22:35 2016  You look here: http://midas.psi.ch/elog/config.html and scroll down to "Execute New". I wonder how you ever could run elog without looking at that page. Tamas                               Re: Monitoring a logbook for changes, posted by Tamas Gal on Wed Jan 13 19:26:35 2016  OK thanks I'll check that out. I did not configure ELOG by myself, I only use it and wrote the Slack plugin ;-) Stefan Ritt wrote: You look here: http://midas.psi.ch/elog/config.html and scroll                   Re: Monitoring a logbook for changes, posted by Johan Forsberg on Wed Jan 13 20:08:04 2016  Aha, that's interesting too! I'll have to look more carefully through the documentation... :) Stefan Ritt wrote: You guys know that there is the possibility to execute an arbitrary       Re: Monitoring a logbook for changes, posted by Johan Forsberg on Wed Jan 13 10:27:21 2016  Yeah, I found the RSS feed feature, but I could not get ETags/Last-Modified header fields which meant that I'd have to read and parse the entire feed every time. Maybe I made a mistake and they do work, but if not, I think it would make sense to implement as it should save work for both the server and the client.   Slackbot for ELOG, posted by Tamas Gal on Wed Jan 13 08:25:50 2016  Dear all, I just wanted to share a small script which I wrote to integrate our ELOG in Slack. This allows us to be notified immediately if there is a new logbook entry directly within the appropriate Slack channels. We're using ELOG V2.9.2-245 but if the log-file format has "Subject,   Prefill attributes for new post, posted by Johan Forsberg on Tue Jan 12 11:35:55 2016  Hi all, I have a use case for ELOG where I need to be able to "prefill" some attributes in the "cmd=new" form, based on the URL. To illustrate, imagine a link that takes the user directly to the form for creating a new post, with the "Subsystem" attribute already       Re: Prefill attributes for new post, posted by Andreas Luedeke on Tue Jan 12 11:48:57 2016  Hi Johan, yes, it is possible. And you were actually very close :-) In order to pass preset-parameters within a URL, you just need to prefix the fieldname with a "p". In your example, you would write "...&pSubsystems=Vacuum". Here is an example for the Linux Demo logbook: https://midas.psi.ch/elogs/Linux+Demo/?cmd=New&pAuthor=Santa+Claus&pSubject=Christmas+Presents&pType=Problem+Fixed&pCategory=Hardware   This       Re: Prefill attributes for new post, posted by Stefan Ritt on Tue Jan 12 11:50:22 2016  Put a "p" in front of the attribute, like "&pSubsystem=Vacuum". This is kind of an undocumented feature just for the experts ;-) Johan          Re: Prefill attributes for new post, posted by Johan Forsberg on Tue Jan 12 14:05:55 2016  Wow, than you both for the quick response! I agree it's quite a hidden gem, but the most important thing is that it works, thanks! Stefan Ritt wrote: Put a "p" in front of the attribute, like "&pSubsystem=Vacuum".   If a Required Attribute starts with a number – No CKEditor, posted by David Dunne on Fri Nov 27 06:53:54 2015  Hello, Is the below an issue or am I doing something incorrectly? Creating an attribute starting with a number and then including that attribute in the Required Attribute list prevents access to the CKEditior. This appears to be the case at least with FreeBSD (10.2 Rel) using Elog V3.1.0 and Windows 7 with Elog V3.1.1-3f311c5. The problem can be recreated using the Elog supplied sample config and adding the necessary attribute, sample config showing       Re: If a Required Attribute starts with a number – No CKEditor, posted by Andreas Luedeke on Fri Dec 11 14:30:10 2015  Hi David, I can confirm a bug: changing the encoding does not work if you have a required attribute starting with a digit. The following minimal config reproduces the bug: [global] Default encoding = 1   How to configure SMTP server in Windows using gmail, posted by Dawang on Thu Nov 12 03:04:09 2015  Hi ELOG Community, Please help me to configure my smtp server in Windows using gmail server This is what in my config:       Re: How to configure SMTP server in Windows using gmail, posted by Stefan Ritt on Thu Nov 12 09:00:23 2015  Elog does not directly support TLS encryption. See here for a wrokaround: elog:68039   Dawang          Re: How to configure SMTP server in Windows using gmail, posted by Dawang on Fri Nov 20 06:25:56 2015  Thanks Stefan, I checked in my ELOG folder and can't find the stunnel.cfg. Is that only available in Linux? Can you please recommend a third party SMTP server for me use to successfully enable mail notif via Windows OS. Thanks much             Re: How to configure SMTP server in Windows using gmail, posted by Stefan Ritt on Fri Nov 20 08:06:45 2015  I believe there is a stunnel port for Windows, but that's more for the experienced users. I guess there is no simple solution. Stefan Dawang                Re: How to configure SMTP server in Windows using gmail, posted by Dawang on Fri Nov 27 06:31:25 2015  Hi Stefan, I remeber when I used elog email notif feature in my previous workplace which is running in windows, I just put IP address on SMTP host = X.X.X.X at the config file and it run without any problem. I'm thinking they are using SMTP server. Can you please recommend any SMTP server and SMTP relayer   log entries after a certain date not displayed - 3.1.1, posted by Mike Giles on Fri Nov 20 10:28:41 2015  Hi, I'm having an issue with Elog 3.1.1 on windows 10 not displaying all log entries (after a certain date) in a logbook directory. The logbook is saved in a Dropbox folder and the entries were created on a windows 8.1 PC with 3.1.1 also.       Re: log entries after a certain date not displayed - 3.1.1, posted by Andreas Luedeke on Fri Nov 20 11:06:24 2015  Hi Mike, I don't think that it is a good idea to have two elogd servers accessing the same files: that's what you are doing with the Dropbox folder, isn't it? ELOG is not made to be used like that. If you want to share the same entries in different logbooks, then you should use the "mirror server" functionality in ELOG. Have a look at: https://midas.psi.ch/elog/config.html#mirroring Cheers,       Re: log entries after a certain date not displayed - 3.1.1, posted by Stefan Ritt on Fri Nov 20 12:40:19 2015  Besides the commen Andrea made I would like to add that you can convince elog to show all files if you simply restart it, then it will re-scan all files. But as Andreas said, if two elogd instances write to the same directory, you will get a mess with double IDs of entries. Stefan          Re: log entries after a certain date not displayed - 3.1.1, posted by Mike Giles on Tue Nov 24 09:18:40 2015  Thanks very much for your comments. I will take a look at the mirror server functionality. I have only been running one elogd at a time, restarting elogd (on Windows 10) doesn't seem to pick up the changes made on Windows 8.1 PC (stopped elogd after changes made and log file updated)             Re: log entries after a certain date not displayed - 3.1.1, posted by Stefan Ritt on Tue Nov 24 12:35:22 2015  Ah, I see another problem. The pre 3.1 version had all logbook files in one directory, and the 3.1 puts the files in one subdirectoy per year. On transition from 3.0 to 3.1, an automatic conversion is made, but only once. If you later add files into the root logbook directory, they will not be seen. So you have to move them manually into the right subdirectory.                Re: log entries after a certain date not displayed - 3.1.1, posted by Mike Giles on Tue Nov 24 21:29:16 2015  Hi, I have noticed that if an entry is not submitted it is saved in a sub-folder (name is current ID number) eg http://localhost:8090/mike/23, while draft it doesn't appear in list page but you can browse directly to it. When you update an entry on one server instance, if you then browse to the entry ID on the 2nd server instance it is draft. If you edit then                   Re: log entries after a certain date not displayed - 3.1.1, posted by Stefan Ritt on Wed Nov 25 08:51:46 2015  Drafts are not shown in the list page, but you can browse directly to them, if you know their idea. They are also shown if you hit "new". Then a box comes up "You have unfished drafts, do you want to edit them?". This is the new draft feature introduced recently and a feature of elog. But I guess you have a more general problem. You run two elogd severs, and you transfer information between the two servers via Dropbox. Elog                      Re: log entries after a certain date not displayed - 3.1.1, posted by Mike Giles on Wed Nov 25 09:27:07 2015  Understood, Thanks very much for your help. Stefan Ritt wrote: Drafts are not shown in the list page, but you can browse directly to   Paste figure from Clipboard, CKEditor 4.5.1 and Firefox 42, posted by Simon Däster on Thu Nov 5 16:59:34 2015  I tried to paste an Image from Clipboard into the CKEditor 4.5.1. Unfortunatelly, that doesn't work. I used Firefox, version 42. When I  looked in the javascript error console, it reported that "TypeError: b is undefined, ckeditor.js:1139:112". The variable  d.config.filebrowserImageUploadUrl could not be found.       Re: Paste figure from Clipboard, CKEditor 4.5.1 and Firefox 42, posted by Stefan Ritt on Tue Nov 10 14:08:47 2015  That seems a CKEditor problem. Can you see if it works on their site (ckeditor.com). The current version is 4.5.4. Maybe they fixed it. You can upgrade CKEditor yourself in elog by just copying the new verson over the old /elog/scripts/ckeditor directory. Simon          Re: Paste figure from Clipboard, CKEditor 4.5.1 and Firefox 42, posted by Simon Däster on Mon Nov 23 10:32:37 2015  Updating CKeditor did work, thanks for the tip.   can attrinute fields contain more that one line, posted by Paul Harrington on Tue Apr 27 17:40:25 2004  Is there any way to configure elog so that attribute fields can be edited  on more than line like the 'text' field?        Re: can attrinute fields contain more that one line, posted by Stefan Ritt on Fri Apr 30 21:26:32 2004  > Is there any way to configure elog so that attribute fields can be edited  > on more than line like the 'text' field?  >           Re: can attrinute fields contain more that one line, posted by Paul Harrington on Fri Mar 18 10:41:39 2005  > > Is there any way to configure elog so that attribute fields can be edited  > > on more than line like the 'text' field?  > >              Re: can attrinute fields contain more that one line, posted by Stefan Ritt on Fri Mar 18 10:54:36 2005  > Was just wondering about the status of the multi-line attributes in Elog, are  > they implemented in elog yet? If not is that something you are planning to do  > in the future?                Re: can attrinute fields contain more that one line, posted by Paul Harrington on Fri Mar 18 11:06:11 2005  > > Was just wondering about the status of the multi-line attributes in Elog, are  > > they implemented in elog yet? If not is that something you are planning to do  > > in the future?                   Re: can attrinute fields contain more that one line, posted by Paolo Franchini on Fri Nov 20 11:20:49 2015  > > > Was just wondering about the status of the multi-line attributes in Elog, are  > > > they implemented in elog yet? If not is that something you are planning to do  > > > in the future?                      Re: can attrinute fields contain more that one line, posted by Stefan Ritt on Fri Nov 20 12:41:58 2015  > > > > Was just wondering about the status of the multi-line attributes in Elog, are  > > > > they implemented in elog yet? If not is that something you are planning to do  > > > > in the future?                         Re: can attrinute fields contain more that one line, posted by Paolo Franchini on Fri Nov 20 15:27:12 2015  > > > > > Was just wondering about the status of the multi-line attributes in Elog, are  > > > > > they implemented in elog yet? If not is that something you are planning to do  > > > > > in the future?          Re: can attrinute fields contain more that one line, posted by Grant Jeffcote on Thu Oct 19 07:00:57 2006  > > Is there any way to configure elog so that attribute fields can be edited  > > on more than line like the 'text' field?  > >    resending information confirmation box after refresh interval, posted by Ken Ludington on Mon Nov 16 20:42:15 2015  After submitting a new post, if the page is left completely alone,, it will after a few minutes prompt that the page needs to resend information. This is the same prompt you'd get if you attempt to refresh a page that had session variables passsed to it. Example is attached.       Re: resending information confirmation box after refresh interval, posted by Stefan Ritt on Tue Nov 17 08:33:15 2015  Start with the demo example configuration, add one line after the other from your config, and figure out which is the offending statement in your config, then post a minimal configuration here which triggers the problem. Ken   email notification authentication failed, posted by Xuan Wu on Fri Nov 13 11:26:12 2015  Hi All, I got into trouble setting up the automated email notification. elog.cfg:   How to configure SMTP server in Windows using gmail, posted by Dawang on Thu Nov 12 02:59:24 2015  Hi ELOG Community, Please help me to configure my smtp server in Windows using gmail server This is what in my config:   WYSIWYG editor for Elog not working in Debian Jessie, posted by Nicola on Tue Nov 3 18:22:33 2015  I suspect that this might be a Debian packaging issue; however no one replied to my help request on the Debian forums so I try posting the question also here. I insatlled Elog on my Debian Jessie machine, I can open it with a browser but when entering a new post just a simple plain text editing box is shown instead of the WYSIWYG editor, and no drag and drop area for attachments is shown.       Re: WYSIWYG editor for Elog not working in Debian Jessie, posted by Andreas Luedeke on Wed Nov 4 14:40:39 2015  Hi Nicola, this appears to be a particular problem of the specific (outdated) ELOG debian package. But you could just download the FCKeditor directly and install it to the proposed location "/usr/share/fckeditor". Or you download ELOG 3.1.1 and give it a try to install it with the makefile. Cheers, Andreas          Re: WYSIWYG editor for Elog not working in Debian Jessie, posted by Nicola on Fri Nov 6 15:52:30 2015  Hi Andreas, I opted for the first solution since the Debian package, although outdated and broken, has some goodies like a systemd unit for managing the daemon which is very handy. I downloaded FCKeditor 2.6.11 from SourceForge (after a long search, seems that CKeditor made its parent almost disappear from the web), unpacked it in the proper folder and not the WYSIWYG editor works. I have just a couple of minor issues: there is no attachment drop area             Re: WYSIWYG editor for Elog not working in Debian Jessie, posted by Stefan Ritt on Fri Nov 6 16:06:34 2015  Elog 3.x comes with CKeditor, not FCKeditor any more! I would actually recommend to use the CKeditor from the current Elog 3.1.1 source package if running together with Elog 3.1.1. Nicola             Re: WYSIWYG editor for Elog not working in Debian Jessie, posted by Andreas Luedeke on Mon Nov 9 10:33:46 2015  Hi Nicola, as Stefan pointed out: the debian package that you are using is from an outdated ELOG version and not supported anymore. I can't help you with that. Is somebody out there that created a 3.1.x version debian package? Cheers, Andreas Nicola wrote:                Re: WYSIWYG editor for Elog not working in Debian Jessie, posted by Nicola on Mon Nov 9 12:15:16 2015  Hi Andreas, understood. I found a 3.1.0 package for Debian unstable but it won't install on Jessie since it depends on a newer version of openssl, and it seems to not have a systemd unit (not sure about that, though). I can live with my old version now that the WYSIWYG editor works, and in the meantime I'll keep my eyes open for a brave soul who would eventually package a newer elog version for Jessie.   restrict edit time and autosave, posted by Kester Habermann on Fri Oct 30 18:20:22 2015  Hello, When using restrict edit time together with autosave, there is the following problem: The counter for restrict edit time seems to start after the autosave. If the time is up, it is no longer possible to submit the report.       Re: restrict edit time and autosave, posted by Andreas Luedeke on Mon Nov 2 08:41:20 2015  Hi Kester, yes, I did run into the same problem, that I could not even delete old drafts due to our restrict edit time. We allow anonymous submissions in our operation logbooks. After a while drafts of unsubmitted messages just pile up; and I need to remove them as administrator. While I can do that easily for anonymous drafts, I cannot do that for drafts of other users: I don't easily see those drafts. It would be really   propogating messages through logbooks, posted by kenzo Abrahams on Thu Oct 29 12:30:43 2015  Hi there Okay so let me explain what im trying to do. I have a table in a logbook (lets call it home) that the user fills       Re: propogating messages through logbooks, posted by Andreas Luedeke on Fri Oct 30 15:52:33 2015  > Hi there >  > Okay so let me explain what im trying to do. I have a table in a logbook (lets call it home) that the user fills          Re: propogating messages through logbooks, posted by kenzo Abrahams on Mon Nov 2 07:39:07 2015    > Hi Kenzo, > I think it would help me to understand your problem, if you would provide a minimal configuration file with two             Re: propogating messages through logbooks, posted by kenzo Abrahams on Mon Nov 2 08:37:06 2015  >   > > Hi Kenzo, > > I think it would help me to understand your problem, if you would provide a minimal configuration file with two   running more then one shell command when new entries is submitted, posted by kenzo Abrahams on Tue Oct 27 11:03:49 2015  Hi Im just curious is it possible to run more then one command using Execute new = <command> or will i have to run a script to run muliple commands.       Re: running more then one shell command when new entries is submitted, posted by kenzo Abrahams on Tue Oct 27 11:14:16 2015  The reason why im asking if it can be done using the Execute option is because I need to have the message id of the entry that was submitted and in an external script i dont have access to the variable kenzo       Re: running more then one shell command when new entries is submitted, posted by Stefan Ritt on Tue Oct 27 11:19:41 2015  The command is passed to your shell, and some shells except more than one command. Most Linux shells accept commands separated by ';', which you can try yourself by entering for example: ls *.c; ls*.h kenzo          Re: running more then one shell command when new entries is submitted, posted by kenzo Abrahams on Tue Oct 27 11:23:36 2015  If i put the ';' into Execute the rest of the command becomes a comment thats why i was trying to use '&&' instead. If I encapulate the whole command in "" or '' then both commands are executed but the files im trying to write to gets created but no data is piped into it. When I use Execute with one command and pipe its output to a file everything works fine though.             Re: running more then one shell command when new entries is submitted, posted by Andreas Luedeke on Tue Oct 27 12:20:16 2015  As far as I know ELOG is recognising a configuration line as a comment only when it starts with a ';'. I can assure you that ELOG does not treat the rest of the line as a comment when you use a ';' within a $shell() command: I do it a lot and it works fine. Here's a simple, generic example using the bash: Preset Author = $shell(if [ $short_name = "Anonym" ] ;then echo $Author;else echo                Re: running more then one shell command when new entries is submitted, posted by kenzo Abrahams on Wed Oct 28 11:11:27 2015  Hi Andreas This worked perfectly thank you. Andreas   dynamic "preset text" option without remplace text if it has changed, posted by Dani on Tue Oct 27 15:41:57 2015  Dear all, Is it possible to have a dynamic "preset text" option without remplace text if it has changed? I would like to switch the template file depending on the attribute value (Type).        Re: dynamic "preset text" option without remplace text if it has changed, posted by Andreas Luedeke on Wed Oct 28 08:51:17 2015  I don't think that this is possible. And it is not clear to me, how you would like it to work: I often use HTML tables in preset text, where the user should fill out columns (e.g. for checklists). I wouldn't want the tables just to append when switching to another checklist. You could rather add a comment to the Type field, explaining          Re: dynamic "preset text" option without remplace text if it has changed, posted by Dani on Wed Oct 28 09:15:52 2015  thanks Andres for your response! I was thinking that it cannot be possible, but , I had to try to ask in the forum. for my question, I think that this could be left on user responsibility to take care about it, and add a comment the the text fied, explaining   Please advise on how to set up selective email notification on logbooks, posted by Julian Brower on Mon Oct 26 15:20:44 2015  Please advise on how to set up selective email notification on logbooks; We want to send an email to specific people when an event that involves them is entered?  At the moment, we currently get an email entry for every new logbook entry. Thanks       Re: Please advise on how to set up selective email notification on logbooks, posted by Andreas Luedeke on Tue Oct 27 11:23:43 2015  Hi Julian, there is a whole chapter in the documentation about that: https://midas.psi.ch/elog/config.html#email If I have to send email, e.g. for Controls issues entered in the operation logbook, I do send the email to a specific mailman mailing list for that group. It is cumbersome to manage email groups in the logbook configuration - in particular if the same lists exists in different logbooks. I only refer to the mailing          Re: Please advise on how to set up selective email notification on logbooks, posted by Julian Brower on Tue Oct 27 14:58:20 2015  Thanks Andreas, I will read that section. Julian Andreas Luedeke wrote: Hi Julian, there is a whole chapter in the documentation   How can we calculate and display the difference between two time entries on a log entry, posted by Julian Brower on Mon Oct 26 15:24:44 2015  See drawing below: We have a beam on and a beam off time. We want to fill in the lost time automaticaaly. Please can you help? Julian         Re: How can we calculate and display the difference between two time entries on a log entry, posted by Stefan Ritt on Mon Oct 26 16:48:51 2015  Unfortunately elog cannot do calculations based on certain fields. You could however add some Javascript code (via "Bottom text = ..." for example), which does that. But that requires JavaScript knowledge to do so. Julian          Re: How can we calculate and display the difference between two time entries on a log entry, posted by Julian Brower on Tue Oct 27 09:26:56 2015  Stefan, I am not an expert in this field so I wondered how one goes about finding someone to write this and how one amends the soruce code? Is that allowed?  Is it a feature than may be of use for other users? Julian Stefan   Logging entries from the command line, posted by kenzo Abrahams on Mon Oct 26 11:06:46 2015  Good Afternoon Im trying to automatically post an entry using information saved in a text file. I have followed the example in the users guide but i always seem to get a error message saying transmission failed. Lets say for instance I have a user named John and his password is Blue and he wants to log into       Re: Logging entries from the command line, posted by Stefan Ritt on Mon Oct 26 11:18:57 2015  Run the elog command with an additional -v flag (verbose output), and you will see what the elogd server return. It's HTML, but you should be able to see some error message. kenzo          Re: Logging entries from the command line, posted by kenzo Abrahams on Mon Oct 26 11:24:46 2015  Hi Stephan The error message I get is "Error: Command Submit not allowed". I dont know if this might be an issue but it says Response Recieved: HTTP/1.1 404 Not Found in the first line of the servers response             Re: Logging entries from the command line, posted by Stefan Ritt on Mon Oct 26 11:32:08 2015  This indicates that the username/password is not correct. Can you log in to that logbook in your browser with the username "John" and password "Blue"? kenzo                Re: Logging entries from the command line, posted by kenzo Abrahams on Mon Oct 26 12:17:40 2015  Yes I can it works perfectly from the browser. Stefan Ritt wrote: This indicates that the username/password is not correct. Can you log                   Re: Logging entries from the command line, posted by kenzo Abrahams on Mon Oct 26 12:26:03 2015  Hi Stephan I got it to work for some reason elog was complaining that my encoding of the message wasnt allowed. I allowed the lognook to allow ELcode and it works perfectly. Thank you for the help.   How does one create a html template for an entry, posted by kenzo Abrahams on Thu Oct 15 12:32:19 2015  Good Day I am new to elog and have a question. This is best explain with an example. If I have two logbooks named "home" and "work" and I would like all the entries       Re: How does one create a html template for an entry, posted by Stefan Ritt on Thu Oct 15 14:34:36 2015  > Good Day >  > I am new to elog and have a question. This is best explain with an example. If I have two logbooks named "home" and "work" and I would like all the entries          Re: How does one create a html template for an entry, posted by kenzo Abrahams on Mon Oct 26 11:16:54 2015  > > Good Day > >  > > I am new to elog and have a question. This is best explain with an example. If I have two logbooks named "home" and "work" and I would like all the   Columns numeric input are added/computed, posted by Dawang on Fri Oct 23 03:36:18 2015  Hi Stefan, Good day. I'm thinking if this wishlist is already available in elog. The values in columns we're added or computed according to formula set in a single separate column.       Re: Columns numeric input are added/computed, posted by Stefan Ritt on Fri Oct 23 08:29:33 2015  No, formulas are not yet implemented. For such things I would use Google Spreadsheets in meantime. Stefan Dawang   Show attachments = 0, posted by Eric Quintero on Wed Aug 12 23:44:16 2015  I have "Show attachments = 0" set in [global], but attachments are shown in the "Full" view. Is this the intended behavior? Looking at individual entries correctly hides the attachments.  We use inline images often, so when an attachement is shown at the bottom of a post it is effectively a duplicate, which clutters things       Re: Show attachments = 0, posted by Stefan Ritt on Thu Aug 13 08:41:57 2015  That's strange. If you use HTML or ELCode encoding, attachments are automatically hidden if they are used inline. So no "Show attachments = 0" necessary! I just tried that with the demo logbook and here is how it looks:          Re: Show attachments = 0, posted by Eric Quintero on Mon Aug 31 17:14:08 2015  The automatic hiding behavior is what I'm after, and I've discovered that it is only a problem for PDF attachments. I have reproduced this on the demo logbook on git revision f828049.  I've taken a look at the source you mentioned, but as far as I can tell, it is just looking for the opening of the img tag in the             Re: Show attachments = 0, posted by Eric Quintero on Fri Oct 16 00:24:50 2015  Hm, looking through the source, there are many many places where PDF files are treated differently than strictly image filetypes (PNG, etc.). This makes sense in the context of multi-page documents.  Still, I like using PDFs for vector plots... I suppose I should also confess to the following modification I've made to my ELOG for treating   inline jpg to png, posted by Jacky Li on Sun Oct 4 20:29:01 2015  Hi, We have a user who posted a lot of inline jpg.  The elog system converted those to png and thus cause the size of the elog to expand about ~4x of the original size.  It is caused the problem of entry size too large for email notifications.  Is there a way to turn off the conversion       Re: inline jpg to png, posted by Stefan Ritt on Tue Oct 13 09:47:18 2015  You can turn off thumbnail creation with Thumbnail size = 0 as written in the documentation. The PNG files are "thumbnails" (= smaller versions of large pictures). Mostly people put large images   How can I host elog in a web server, posted by Dawang on Thu Oct 8 06:36:34 2015  How can I host elog in a web server. I need sample config file on [global] segment to show config on how it can be host. Please need your help. Thanks       Re: How can I host elog in a web server, posted by Andreas Luedeke on Thu Oct 8 11:27:55 2015  I am honestly not sure if I understand the question. You can run ELOG behind an Apache Webserver. Look for example at https://midas.psi.ch/elog/adminguide.html#secure Dawang wrote: How can I host elog in a web server. I need sample config file on [global]   "not a valid Win32 application" error on versions 3.x.x, posted by Jean Pierre Vandecandelaere on Thu Oct 1 15:09:17 2015  Hello, we have been using elog 2.7.1 as a logbook to signal problems and so on in our Engine Room Simulator for a couple of months now. Since this is exactly what we're looking for, I've installed the latest release in our sailing simulator as well. On this occasion I thought about updating the   Syntax for conditional list display, posted by Terry L on Tue Sep 15 18:04:35 2015  Good Morning, I would like to limit the ability to edit certain attributes in an ELOG logbook, depending on the user who is logged in.  I.e. if "guest" or a standard "login user" is logged in, I only want to allow the user to edit "attribute1" & "attribute2" of say, 5       Re: Syntax for conditional list display, posted by Edmund Hertle on Mon Sep 21 17:08:44 2015  Hey Terry, I don't think this is possible, since in general you cannot define config settings in a way that it would only affect specific users. For example, you also cannot have different themes for different users (as stated here: https://midas.psi.ch/elogs/Forum/68112 )          Re: Syntax for conditional list display, posted by Terry L on Tue Sep 29 17:15:07 2015  Hi Eddy, Thank you for your response.  I had a feeling that was the case, but I had high hopes! :)  The reason I would like this feature is because I am trying to use ELOG as a software anomaly tracking log, where any user can create an ELOG and fill out "category", "computer"             Re: Syntax for conditional list display, posted by Andreas Luedeke on Wed Sep 30 09:28:39 2015  Hi Terry, if you really want to do it, you can find a way to make it work. But it is not straight forward and not what ELOG is made for. Here some ideas how it could work: ELOG allows you to have different commands for different users. You could allow "New" and "Edit" for normal users, but "Reply" only for administrators. You can use "Subst on reply <attribute>                Re: Syntax for conditional list display, posted by Andreas Luedeke on Thu Oct 1 12:01:11 2015  Oups: there is a flaw in this approach! You can only get different commands for Anonymous and Login Users. You cannot select different command for Admin users: they will just have the "Config" command automatically. You could allow anonymous users to make new entries and restrict login to administrators. But that is certainly not what you want, so forget   elog client overwriting attached files when editing existing log, posted by Joseph McKenna on Wed Sep 16 02:47:33 2015  Using the elog client to upload atachments, I can successfully send attachments to an existing elog, however the existing attachments are lost. I have tested using the elog client version 3.1.1 and elog client version 2.9.2 sending to elogd 2.9.0 elog -h localhost -p 8080 -l test -f  file1.png -f file2.png -e 249 -v -x       Re: elog client overwriting attached files when editing existing log, posted by Edmund Hertle on Mon Sep 21 10:48:31 2015  Hey, I think this is a "problem" of the elog client, since it simply replaces the data. In most cases this is what you want, but since I wanted to have the option to append to the acutal message I built a function to first read-back the entry and add to the message instead of replacing it.          Re: elog client overwriting attached files when editing existing log, posted by Andreas Luedeke on Mon Sep 28 06:45:03 2015  The "elog" command has no "append" feature. You can either create a new entry, or you can overwrite an old entry. Therefore this is not a bug but the intended bahaviour. I admit that the documentation is misleading, since overwriting an existing entry is called "editing":             Re: elog client overwriting attached files when editing existing log, posted by Stefan Ritt on Mon Sep 28 11:58:11 2015  You are right. "Edit" should be more like "Replace". I changed that in the documentation. I acknowledge the request to replace or append only a specific attribute or attachment, and put it on my to-do list. Stefan             Re: elog client overwriting attached files when editing existing log, posted by Edmund Hertle on Wed Sep 30 10:23:30 2015  Hey, the edit/replace feature is already capable of just replacing individual attributes. I already make heavy use of this feature: 1. One entry is created with some measurement parameters   Creating ELog Links not working properly in HTML Editor, posted by Edmund Hertle on Mon Sep 7 12:44:42 2015  Hey, the syntax for creating links to other elog entries has a small issue in the HTML editor. The link will not be created properly if there are whitespaces in the name of the logbook. Using ELCode (or in a simple attribute field) the whitespaces can be replaced by "+", but this does not       Re: Creating ELog Links not working properly in HTML Editor, posted by Andreas Luedeke on Mon Sep 28 06:29:57 2015  I can confirm this bug. But I don't think this has to work as you've described it, when using the HTML editor: if you use HTML, you can use the link feature of the editor. But that link feature does currently not work at all with internal elog references, not even a simple elog:1">          Re: Creating ELog Links not working properly in HTML Editor, posted by Stefan Ritt on Mon Sep 28 12:05:04 2015  Right, spaces won't work. But others work. Andreas, if you just put elog:1 without any link etc. just as plain text, it will be converted automatically into a link. A workaround is to explicitly specify a link to an elog entry. Press the link button from the editor toolbar, enter a name and copy the full             Re: Creating ELog Links not working properly in HTML Editor, posted by Andreas Luedeke on Tue Sep 29 08:50:30 2015  Hi Stefan, yes, I know that a plain text "elog:1" works in the HTML editor, too. But if you put "elog:1" in the URL field of the link dialog, then ELOG screws up: you get the text    elog:1">elog:1 and   Elog command not working properly, posted by Stefano colafranceschi on Thu Sep 24 00:14:49 2015  <p>Hi,</p> <p>I have a problem running elog command from php script. Basically in the php I call system("elog -h etc etc.. And from the php command line works       Re: Elog command not working properly, posted by Edmund Hertle on Fri Sep 25 22:37:08 2015  > <p>Hi,</p> >  > <p>I have a problem running elog command from php script. Basically in the php I call system("elog -h etc etc.. And from the php command line works          Re: Elog command not working properly, posted by Stefano on Sat Sep 26 03:34:44 2015  Yes it was a path issue PHP was not loading correctly environmental path > > <p>Hi,</p>   Submit to multiple logbooks simultaniously, posted by Francois Cloutier on Fri Sep 25 19:10:45 2015  Good day, My question is : Is it possible to submit to multiple logbooks simultaniously ? I have 5 logbooks that could share common attributes, is there a way to acheive that without recreate a new entry in each of them ?       Re: Submit to multiple logbooks simultaniously, posted by Edmund Hertle on Fri Sep 25 22:24:18 2015  Hey, You can use the elog command line tool and submit the same attributes to the 5 different logbooks by iterating over the logbook names executing something like this:   Elog command not working properly, posted by Stefano colafranceschi on Thu Sep 24 00:13:31 2015      elog from php, posted by Stefano on Wed Sep 23 23:57:43 2015  Hi, I need to run elog command in an online php script. The problem I see is that the script works from the command line but not from the browser. In the script I just use:   Suggestion for tooltips and/or comments, posted by Edmund Hertle on Tue Sep 22 15:04:55 2015  Hey, if you define a Tooltip at the moment it is only displayed on the attribute. I would like it very much if it would also be displayed on the values (on the right column in the detailed view and on the whole column in the list view), since we are using the tooltips to define the units of the attribute   Suggestion for tooltips and/or comments, posted by Edmund Hertle on Tue Sep 22 14:56:37 2015  Hey, if you define a Tooltip at the moment it is only displayed on the attribute. I would like it very much if it would also be displayed on the values (on the right column in the detailed view and on the whole column in the list view), since we are using the tooltips to define the units of the attribute   elog client overwriting attached files when editing existing log, posted by Joseph McKenna on Wed Sep 16 01:27:20 2015  Using the elog client to upload atachments, I can successfully send attachments to an existing elog, however the existing attachments are lost. I have tested using the elog client version 3.1.1 and elog client version 2.9.2 sending to elogd 2.9.0 elog -h localhost -p 8080 -l test -f  file1.png -f file2.png -e 249 -v -x   User based theme selection , posted by Oliver Kleinau on Thu Sep 3 07:09:33 2015  Hi, is it somehow possible to use different themes for different users?  Perhaps editing the password XML file? Thanks, Oliver       Re: User based theme selection , posted by Andreas Luedeke on Fri Sep 4 10:04:20 2015  No, I don't think it is possible. Oliver Kleinau wrote: Hi, is it somehow possible to use different themes for different users? Perhaps   Attachment Uploaded Time is off by one hour, posted by Edmund Hertle on Wed Sep 2 20:23:21 2015  If I upload an attachment the timestamp of the attachment is set to one hour in the future, as demonstrated with this test attachment being one hour in the future compared to the entry time   Copy To Function, posted by Mike Bodine on Wed Sep 2 17:06:17 2015  Hi, We've recently implemented the Copy To function and it works as advertised. The issue we're having is the original entry time is also copied, so if we take an old log and copy it to another log book the entry using reverse sort, preserve = 0 may not display as the newest id. It will receive   Copy To Function, posted by Mike Bodine on Wed Sep 2 17:06:10 2015  Hi, We've recently implemented the Copy To function and it works as advertised. The issue we're having is the original entry time is also copied, so if we take an old log and copy it to another log book the entry using reverse sort, preserve = 0 may not display as the newest id. It will receive   Copy To Function, posted by Mike Bodine on Wed Sep 2 16:55:00 2015  Hi, We've recently implemented the Copy To function and it works as advertised. The issue we're having is the original entry time is also copied, so if we take an old log and copy it to another log book the entry using reverse sort, preserve = 0 may not display as the newest id. It will receive   Preset on duplicate, posted by Daniel Sajdyk on Mon Aug 31 22:35:03 2015  Hi. Is there any way that "Preset on duplicate" contain ID entry from which it was duplicated?     Draft saved is treated as an entry edit, posted by Daniel Sajdyk on Fri Aug 28 21:01:42 2015  Hello. In Elog i have attribute called "Zmieniano" (eng. changed)  which should store how many times entry was edited. If entry was not edited it should have only preset value "oryginalny wpis" (eng. oryginal entry), but when I edit it, it should have also date, time,       Re: Draft saved is treated as an entry edit, posted by Andreas Luedeke on Mon Aug 31 09:38:38 2015  Hi Daniel, this is an undesired side effect of a new feature. I wouldn't call it a bug ;-) There is no straight forward way for elog to distinguish between a "Submit" and an automatic save. Therefore the "... on edit          Re: Draft saved is treated as an entry edit, posted by Daniel Sajdyk on Mon Aug 31 13:12:09 2015  Hi Andreas and thank you very much for explanation ;) So, we'll have to wait for new version which will correct this.     Send e-mail based on a hierarchy of attributes?, posted by Phil Rubin on Mon Aug 24 20:40:14 2015  Is there a way to distribute e-mail based on the consideration of several attributes and values?  A simple example:  attributes type and category have several different values, say, routine and problem for type and hardware and software for category, but one would only like messages sent when there's a problem to different sets of hardware or software types.  Thus:       Re: Send e-mail based on a hierarchy of attributes?, posted by Andreas Luedeke on Wed Aug 26 09:18:17 2015  Yes, this can be done. See below for an example configuration. Attributes = entrytype, category Options entrytype = routine{1}, problem{2}   Version 3.1.1 of elog has been released, posted by Stefan Ritt on Tue Aug 4 15:35:39 2015  Version 3.1.1, released August 4th, 2015 Updated CKEditor to version 4.5.1 Implemented "Date/Time format <attribute> = ..." Implemented "Use Email Subject Edit = ..."       Re: Version 3.1.1 of elog has been released, posted by Edmund Hertle on Thu Aug 20 14:23:43 2015  There seems to be a small problem with the new "Date/Time format <attribute>" implementation. It works great for the detailed view of a single entry:          Re: Version 3.1.1 of elog has been released, posted by Stefan Ritt on Thu Aug 20 15:52:26 2015  Thanks for reportung that bug. I fixed it in revision f828049. Edmund Hertle wrote: There seems to be a small problem with the new "Date/Time format   Compiling for Windows, posted by Richard Stamper on Wed Aug 19 17:08:56 2015  I am interested in using LDAP authentication for elogd on Windows for which it looks like I need to compile from source, enabling LDAP in the make file. Does anyone have advice on build environments for Windows in which they have had success making elog?  Free ones preferably, such as Cygwin.    "Resolve host names" does not resolve host names, posted by Daniel Sajdyk on Wed Jul 1 11:05:32 2015  Hello I use Resolve host names = 1 in my config file, but I still get IP instead domain name. I use elog in internal network with my own DNS.       Re: "Resolve host names" does not resolve host names, posted by Stefan Ritt on Tue Aug 4 13:33:14 2015  In elog I simplu use the function gethostbyaddr() to resolve the host name. If this does not work, the underlying OS does not know the hostname either. Probably you can test this with "nslookup a.b.c.d", to see any further error message. Daniel          Re: "Resolve host names" does not resolve host names, posted by Daniel Sajdyk on Tue Aug 18 14:23:29 2015  I'm sorry... it was my mistake. I put Resolve host names in logbook config instead global. Regards Daniel. Stefan   IE 11 - Text Edit Toolbar Not Working, posted by John Krautkramer on Sat Aug 15 00:00:36 2015  Hi, I've been exploring elog. I find when using IE 11, the text editor formatting buttons don't work with HTML encoding selected. The entire toolbar is grayed out. It appears to work fine with Chrome. Any ideas or direction to look? elog v3.1.1 is running on RedHat EL5. I've tried the       Re: IE 11 - Text Edit Toolbar Not Working, posted by Andreas Luedeke on Mon Aug 17 09:27:45 2015  This reply has been written with IE 11 using the embedded HTML editor of ELOG. Therefore it is obviously not a problem of ELOG 3.1.1 with IE 11. It could be a problem with your ELOG installation or it could be a problem with you IE 11 configuration. Can you use the HTML editor of this forum with IE11? Did you install ELOG 3.1.1 on top of an existing ELOG installation?          Re: IE 11 - Text Edit Toolbar Not Working, posted by Stefan Ritt on Mon Aug 17 09:55:16 2015  Also make sure you don't have "Compatibility Mode" turned on in IE11. See here for example: http://winaero.com/blog/how-to-enable-compatibility-view-in-internet-explorer-11-ie11/ Andreas             Re: IE 11 - Text Edit Toolbar Not Working, posted by John Krautkramer on Mon Aug 17 16:30:17 2015  The issue was IE Compatibility Mode. There were no websites in the list, but the "Display intranet sites in Compatibility View" was checked. Removing this fixed it. Thanks for the help!   Isolating search urls, posted by Philip Leung on Wed Aug 12 16:59:30 2015  Hello all, I am in need of isolating GET-requests referring to long-running, read-only elog functions such as search/filter/sort in our Apache proxy and redirecting them elsewhere. There does not, however, appear to be any easy way of reliably isolating these functions (with the exception of sort) by only       Re: Isolating search urls, posted by Stefan Ritt on Wed Aug 12 17:19:45 2015  I guess the underlying problem is the long time these requests take and block other users. I have pretty high on my todo list to convert ELOG into a multi-threaded server which would fix this completely. So if you are patient enough (=months) you might get what you want.          Re: Isolating search urls, posted by Philip Leung on Thu Aug 13 10:06:23 2015  Thanks for the quick response! It's great to hear that multi-threading is in the works as this has been my main issue with an otherwise very nice piece of software. I do, however, feel like we should be able to get my slightly hacky approach to work to hold us over until you finish.             Re: Isolating search urls, posted by Philip Leung on Mon Aug 17 10:32:51 2015  Is there no good way of differentiating search operations from others by URL? Philip Leung wrote: Thanks for the quick response!                Re: Isolating search urls, posted by Stefan Ritt on Mon Aug 17 10:41:22 2015  Look for "&subtext=" in the URL Philip Leung wrote: Is there no good way of differentiating search operations from others                   Re: Isolating search urls, posted by Philip Leung on Mon Aug 17 11:17:37 2015  This only applies to searches which specify that they are searching through the message text though. It would not work for things like quick filter Stefan Ritt wrote: Look for "&subtext=" in the URL                      Re: Isolating search urls, posted by Stefan Ritt on Mon Aug 17 11:26:22 2015  For any other filter you need "&<attribute>=", which of course requires the knowlede of all attributes. There is no other "standard" flag in the URL indicating a search. Philip                         Re: Isolating search urls, posted by Philip Leung on Mon Aug 17 11:28:08 2015  Would there be a simple way to redirect all URLs BUT the ones which trigger searches? Stefan Ritt wrote: For any other filter you need "&<attribute>=", which                            Re: Isolating search urls, posted by Stefan Ritt on Mon Aug 17 11:36:49 2015  No, no and again: no. Philip Leung wrote: Would there be a simple way to redirect all URLs BUT the ones which                               Re: Isolating search urls, posted by Philip Leung on Mon Aug 17 11:52:54 2015  Noted. Thank you for your time Stefan Ritt wrote: No, no and again: no.   Problem with elog and Internet Explorer when saving an entry, posted by TorstenJ on Fri Jul 31 13:59:12 2015  Hi all, first off all let me say, that I realy like this great tool. That is a lot of help for keeping our server documentation up-to-date. Thanks to all contributors for that.       Re: Problem with elog and Internet Explorer when saving an entry, posted by Stefan Ritt on Tue Aug 4 15:36:48 2015  This issue should have been fixed in the new version 3.1.1. If the problem still persists, try to clear your browser's cache, since it might still have cached the old JavaScript files having this bug. TorstenJ          Re: Problem with elog and Internet Explorer when saving an entry, posted by TorstenJ on Mon Aug 10 12:02:27 2015  Hello Stefan, thanks for you reply. I tried an ujpdate today to my old installation, but also after cleaning the IE cache, the problem consists. The same result is, when doing a clean new installation, with the default elog.cfg and and cleaned cache as well an IE that was reseted to defaults.               Re: Problem with elog and Internet Explorer when saving an entry, posted by Stefan Ritt on Wed Aug 12 10:54:27 2015  Do you have the problem on this Forum as well? If not, then something is wrong with your installation. Like old JavaScipt files etc. Start with a fresh installation and you should be fine. If you have the same problem in this Forum, let me know and I will further investigate it.   ELOG 3.0 plus and MS Windows issues., posted by William Wong on Wed Aug 5 02:59:50 2015  Greetings all.  A few ELOG users have posted issues with ELOG 3.0 and newer not working with a variety of MS Windows operating systems,. I have also encountered a similar problem in my environment.       Re: ELOG 3.0 plus and MS Windows issues., posted by Stefan Ritt on Wed Aug 5 12:09:47 2015  I recompiled the executables according to https://msdn.microsoft.com/en-us/library/jj851139.aspx and replaces the elog311-1.exe distribution. Can you try if it works? Unfortunately I don't have a XP machine here.          Re: ELOG 3.0 plus and MS Windows issues., posted by William Wong on Wed Aug 5 23:36:29 2015  Thank you for recompiling ELOG.  Unfortunately, there is no change in all the test machines I ran the newly compiled ELOG 3.1.1-1 on.  I will use the 2.x version until our systems move to a new operating system or I can find someone in my IT department who knows how to compile programs   Minor bug in the emails generated by elog., posted by David Pilgram on Thu Jun 25 16:39:06 2015  In the emails generated by anyone making an entry in this log book, every apostrophe is followed by a semi-colon.  So the text "I don't think..."  appears in the email as "I don';t think...", and possibly that comment will appear in the email as "I don';;t think...." - not sure on the last bit.  It has been around in the past few versions of elog, but don't recall precisely when this started       Re: Minor bug in the emails generated by elog., posted by Stefan Ritt on Tue Aug 4 13:57:28 2015  Apostrophes are encoded as "&#39;" inside the CKEditor used by elog, which sents the raw HTML text as email notification. You can test this by pressing the "Source" button at the top left menu in the CKEditor, then you see it. In my mail program (both Apple Mail and Thunderbird) this HTML enocding is correctly shown as the original apostroph, so   Customized email subject line for an updated entry, posted by Erkcan Ozcan on Tue Jul 7 21:57:04 2015  Hi, The default email subject line for a new entry is: "New ELOG entry", and the default email subject line for an edited entry is: "Updated ELOG entry". However when we set "Use Email Subject", both new entries and the updated entries use the same email subject. Is there an equivalent       Re: Customized email subject line for an updated entry, posted by Erkcan Ozcan on Wed Jul 15 21:30:47 2015  Since there were no responses, I decided to make good use of the fact that the software is thankfully open-sourced. I modified elogd.c and added just a couple of lines to get what I wanted. 22245,22250d22244          Re: Customized email subject line for an updated entry, posted by Stefan Ritt on Tue Aug 4 13:29:45 2015  Thanks, I added your code to the distribution and updated the documentation. Erkcan Ozcan wrote: Since there were no responses, I decided to make good use of the fact   Revision for Indonesian Translation, posted by Banata Wachid Ridwan on Wed Jul 22 03:09:39 2015  hello, in my spare time, I try to fix some bugs, typo, and update for Indonesian translation       Re: Revision for Indonesian Translation, posted by Stefan Ritt on Tue Aug 4 13:23:47 2015  Thanks, I included your changes in the distribution. Banata Wachid Ridwan wrote: hello, in my spare time, I try to fix some bugs, typo, and   elogd crashes with a URL, posted by Jaime Duran on Wed Jul 22 22:54:59 2015  URL causes elogd to crash when a global password file name doesn't match any group's password file name.  The offending URL is copied from the address field of the browser after sorting a logbook by on of the fileds. After login out and using the copied URL, elogd shows the authentication dialog and then crashes after the credentials are submited.       Re: elogd crashes with a URL, posted by Stefan Ritt on Tue Aug 4 13:18:26 2015  I could not reproduce your problem. I can only fix it if I can reproduce it, so let's agree on a common test base. May I ask you to do the following: Download the most recent elog version from bitbucket and compile it Create two new logbooks "demo1" and "demo2" with minimal configuration, but using yor global password file which differs from the group ones Send me step-by-step instructions how to trigger   dependencies lib, posted by alireza on Sun Jun 14 10:17:18 2015  Hi,I'm new here :) and want to install elog on linux suse. could you please tell me, how can I find this following lib dependency. linuxsuse#rpm -i elogi386.rpm                  error: Failed dependencies:       Re: dependencies lib, posted by Stefan Ritt on Mon Jun 15 08:28:43 2015  If you Google for "libssl.so.6 is needed", you will find for example this site: http://ubuntuforums.org/showthread.php?t=2096126 , which tells you to install the libssl-dev package. alireza          Re: dependencies lib, posted by John P. Huber on Mon Aug 3 22:13:16 2015  Can you provide simliar guidance for Scientific Linux release 6.6 (Carbon, 64 bit version) as I get the "failed dependencies" after installing openssl-devel package and I tried linking /usr/lib64/libssl.so.1.0.1e as libssl.so.6 in both /lib and /usr/lib ? -jph Stefan   Insert TimeStamp not working, posted by Luca on Wed Jul 29 23:07:41 2015  Hi, I have an eLog logbook installed on my machine. If I click on the INSERT TIMESTAMP botton in this post a Timestamp of the kind "Wed Jul 29 23:09:15 2015" is added.       Re: Insert TimeStamp not working, posted by Stefan Ritt on Thu Jul 30 11:10:59 2015  That problem has been fixed this week by this commit: https://bitbucket.org/ritt/elog/commits/5a8547bd995d88d7e314de30ee4bce71aa129c00 Please upgrade to the current revision from the bitbucket repository and recompile elog. Luca   Pasting pictures from clipboard does not work anymore (firefox 39), posted by Jan Henry Hetzel on Tue Jul 14 10:10:54 2015  Hallo, as I have already written in the title, my problem is that after uprgrading my firefox to version 39 I cannot include pictures from clipboard. A downgrade to a previous version of firefox helped. But as this is not recommended I wanted to ask if there is a workaround or if I should inform the author of the "imagepaste"-extension of the CKEditor? Best regards, Jan       Re: Pasting pictures from clipboard does not work anymore (firefox 39), posted by Stefan Ritt on Tue Jul 14 19:12:55 2015  I'm not aware of any workaround, so you might ask the author. Once you find a solution, I'm happy to include it in the distribution. Stefan Jan          Re: Pasting pictures from clipboard does not work anymore (firefox 39), posted by Jan Henry Hetzel on Thu Jul 23 08:19:38 2015  Hi, following the author of imagepaste one should upgrade the version of th CKEditor to a version >= 4.5. So replacing the folder ckeditor with a new version helped.             Re: Pasting pictures from clipboard does not work anymore (firefox 39), posted by Stefan Ritt on Wed Jul 29 11:53:13 2015  I updated the current version with this change (CKEditor 4.5.1) and indeed it fixes the problem. The change is comitted to the git repository and will be contained in the next release. Jan   , posted by Banata Wachid Ridwan on Wed Jul 22 00:48:24 2015      Revision for Indonesian translation, posted by Banata Wachid Ridwan on Wed Jul 22 00:48:21 2015  I got some spa   Cannot download large attachments, posted by Konstantin Olchanski on Tue Jul 14 19:29:17 2015  Older versions of elogd have a problem with sending long attachements - the send() syscall is not protected against interrupt by SIGALARM. This seems to be fixed in non-SSL builds of current elog (version 3+),  but for SSL builds, the error handling for the SSL_write() function looks incorrect. In addition, from OpenSSL documentation it is not clear if SSL_write()   ELOG and Gmail?, posted by Christopher Lee on Wed Apr 11 17:43:13 2012  Firstly, as with some of the others recently, I am a complete newb when it comes to linux, Though I refuse to let that stop me and really want to get this working.       Re: ELOG and Gmail?, posted by Stefan Ritt on Thu Apr 12 08:57:51 2012                            Christopher Lee wrote:                                            Firstly, as with some of the others recently, I am a complete newb when it comes to linux, Though I          Re: ELOG and Gmail?, posted by Christopher Lee on Thu Apr 12 14:38:09 2012                            Stefan Ritt wrote:                                                                                     Re: ELOG and Gmail?, posted by Christopher Lee on Sat Apr 14 11:10:14 2012  To get it to work required a working installation of IPTABLES and STUNNEL First is to add the following details into elogd.cfg                Re: ELOG and Gmail?, posted by Erkcan Ozcan on Fri Jul 3 21:26:32 2015  Using stunnel4 and the 3.1.0 version of elog, I was able to use gmail smtp without the use of iptables. In my elogd.cfg I chose:   CKEditor won't load under IE Compatibility Mode, posted by Ben Shepherd on Wed Jun 24 15:18:30 2015  I just upgraded to 3.1.0 after many years using 2.9.2. Our eLogs are absolutely crucial for the operation of our accelerators, so first of all I'd like to say: thanks a lot for everything you've done! It's a rock-solid application that works really well. The issue I'm having is a minor one. Some of our users are using Internet Explorer 11, which has a Compatibility Mode option that is enabled       Re: CKEditor won't load under IE Compatibility Mode, posted by Stefan Ritt on Thu Jun 25 12:52:06 2015  I don't get your point. If you add the meta tag wiht the viewport, then the IE7 mode will load the CKEditor? The CKEditor home page says that IE7 is not supported any more, so I wonder if this simple tag might help. Can you turn off the compatibility mode on a per-URL basis? If I try on my smatphone, the display is correct, so why you need the viewport tag? Can you shouw me examples?          Re: CKEditor won't load under IE Compatibility Mode, posted by Ben Shepherd on Thu Jun 25 15:16:51 2015  The viewport thing and the IE7 mode thing are separate issues. OK, maybe it's a CKEditor thing then. I thought it might be. It seems pretty stupid that the default setting in IE is to emulate an older browser - although I guess a lot of people have very outdated intranet sites. Anyway, we have a fix here so I don't think you need to do anything.             Re: CKEditor won't load under IE Compatibility Mode, posted by David Pilgram on Thu Jun 25 16:20:09 2015  I have had to play around with viewports for other reasons than elog, but I do have a couple of comments to make.  Obviously the meta tag viewpoint has to be added in.  Also, elog was written for large screens (no-one thought anything else was possible when elog was started), and it is relatively recent that mobile devices have become a significant percentage of views of web pages.  Google is downgrading websites that are not mobile-friendly   Need to move ELOG to other host, posted by Mario Gaertner on Wed Jun 24 19:27:49 2015  Hi there, our host running ELOG crashed. I installed ELOG at another host with copying backup files / folders to new installation. New installation looks fine and seems to be working. But one big problem occurs I only can see some of former existing logbooks. Are there any suggestions how to build an new       Re: Need to move ELOG to other host, posted by Stefan Ritt on Thu Jun 25 12:32:48 2015  Simply copy over your elogd.cfg file and all files under "logbooks". If you only see former logbooks, you grabbed probably the wrong elogd.cfg file. Mario   Need to move ELOG to other host, posted by Mario Gaertner on Wed Jun 24 19:22:10 2015  Hi there, our host running ELOG crashed. I installed ELOG at another host with copying backup files / folders to new installation. New installation looks fine and seems to be working. But one big problem occurs I only can see some of former existing logbooks. Are there any suggestions how to build an new   Upload of images fails from mobile platforms when using ELOG under SSL, posted by Hanno Perrey on Wed Jun 10 11:36:48 2015  Hej, I discovered a problem uploading images taken with the cameras of mobile devices to new elog entries directly from said devices. When selecting the image and choosing "Upload", either the blue page loading indicator gets stuck at around 10% (mobile Safari, iOS 8.3, iPhone 4 and iPad mini)       Re: Upload of images fails from mobile platforms when using ELOG under SSL, posted by Stefan Ritt on Wed Jun 10 12:22:35 2015  That's strange. Might have to do with the SSL library elog uses. I just tried this forum (actually the "Demo"), and it worked fine through SSL, but I use an Apache proxy server for elog implementing the SSL protocol, which might be slightly different. Hanno          Re: Upload of images fails from mobile platforms when using ELOG under SSL, posted by Neal Grafton on Fri Jun 12 11:59:00 2015  On the subject of uploads, is there a way to restrict the viewing size of an uploaded photo or picture in the config? So it doesn't appear over more than one page. Neal             Re: Upload of images fails from mobile platforms when using ELOG under SSL, posted by Stefan Ritt on Fri Jun 12 12:19:50 2015  Use thumbnails (need ImageMagick to be installed for that), and you can show for example 300x300 pixel thumbnails of all pictures. Neal Grafton wrote: On the subject of uploads, is there a way to restrict the viewing          Re: Upload of images fails from mobile platforms when using ELOG under SSL, posted by Hanno Perrey on Thu Jun 18 15:46:28 2015  Hej Stefan, thanks for the suggestion -- through a Apache proxy the upload does indeed work without problems. Cheers,   Revisions in other languages, posted by Daniel Sajdyk on Wed Jun 17 19:20:40 2015  Hello. When I use "Revisions" name for attribute I have correct entry like "DATE by XXX from SOME_IP" which is added to previous edition date.    unknown user name in "Admin user" line invalidates all entries, posted by Hanno Perrey on Wed Jun 17 10:52:16 2015  Hej, I just noted that when having an unknown (or presumably misspelled) user name in the "Admin user" line in the   Limited access to an attribute, posted by Michael Cianci on Mon Jun 15 19:38:58 2015  Is there a way to limit access to an attribute "Reviewed by" to only supervisors? Thank you for your help Mike       Re: Limited access to an attribute, posted by Stefan Ritt on Mon Jun 15 22:00:40 2015  No. Michael Cianci wrote: Is there a way to limit access to an attribute "Reviewed by"   Limited access to an attribute, posted by Michael Cianci on Mon Jun 15 19:33:39 2015  Is there a way to limit access to an attribute "Reviewed by" to only supervisors? Thank you for your help Mike   "Preset on reply" not work?, posted by Daniel Sajdyk on Sun Jun 14 21:30:14 2015  Hi all :) I try to setup my first lobgook, and have some problem.  I want that Author was preset by $long_name, and it can't change its name. That works correct. I also want, when other user click Reply,       Re: "Preset on reply" not work?, posted by Stefan Ritt on Mon Jun 15 08:33:50 2015  You have "Remove on reply" together with "Preset on reply Author". Since the first is executed later, you first preset the author name, then remove it again. Just discard the "Remove on reply" and you are fine. Daniel          Re: "Preset on reply" not work?, posted by Daniel Sajdyk on Mon Jun 15 09:16:00 2015  Ok. Now it works :) Thank you :) I'm translating Elog into Polish. When I finish, can I send it to you? Regards Daniel.  Stefan   Drag-and-drop not working in elog 3.1.0, posted by David Wallis on Fri Jun 5 23:08:43 2015  Drag and drop for attachments dosn't work on either Chrome 37.0.2062.94 (64-bit) or FIrefox 31.5.3 (both on Linux). D&D works on the midas.psi.ch demo page. On my logbooks, the "drop attachements here" area does not have a dashed line border.       Re: Drag-and-drop not working in elog 3.1.0, posted by Andreas Luedeke on Sat Jun 6 13:38:15 2015  As you've pointed out, for the very same browsers D&D works with the Forum, and that is ELOG 3.1.0. Hence I can only conclude that it is neither a browser, nor an ELOG issue, but a problem of your local installation. Maybe you try with a fresh and clean installation first? What Linux are you using, by the way? Or you've picked by bad luck a 3.1.0 version where D&D did really not work. But I cannot tell, since          Re: Drag-and-drop not working in elog 3.1.0, posted by David Wallis on Wed Jun 10 17:45:21 2015  Andreas, I am running the latest version of the elogd source RPM that I could find - ELOG V3.1.0-2411f95 on Red Hat Enterprise Linux Server release 6.6 (Santiago), with kernel level 2.6.32-504.16.2.el6.x86_64. I can try grabbing the latest source code from Git and try building that. There are a couple             Re: Drag-and-drop not working in elog 3.1.0, posted by Andreas Luedeke on Thu Jun 11 08:48:21 2015  Dear David, what I meant with a "fresh and clean installation" is, that you do not install elog on the production system over the existing elog, but instead on another Linux box. One possible problem could be that you have a modified CSS (or some other file), which is not overwritten by the ELOG installation. That file could break the D & D functionality. My advise would be, to do an ELOG test installation                Re: Drag-and-drop not working in elog 3.1.0, posted by Stefan Ritt on Thu Jun 11 09:09:03 2015  Sure, I just wanted to get feedback from you regarding the draft functionality. As it looks now people are happy, so I will do a 3.1.1. Andreas Luedeke wrote:   PS: Stefan, V3.1.0-2411f95 is from April   Different timezone settings for each elog, posted by gary holman on Wed Jun 10 17:30:34 2015  I have multiple elogs running on a server.  Is it possible to set one elog to a different timezone?  For example, I run an elog for a group in Washington state, and another elog for a collaboration group in Germany.  I would like to set each elog to their respective timezone.  thanks,       Re: Different timezone settings for each elog, posted by Stefan Ritt on Wed Jun 10 18:13:50 2015  The elog server grabs the local timezone from the underlying OS. Under Linux, you can change the timezone using the TZ environment variable. See here: http://www.cyberciti.biz/faq/howto-linux-set-time-zone-per-user-basis/ If you need different time zones on the same server, you have to create two accounts and run two instances of elogd on these accounts.          Re: Different timezone settings for each elog, posted by gary holman on Wed Jun 10 20:37:48 2015  Thanks Stefan,  It looks like the group had actually contacted you directly as well (sorry for the redundant work!).  Thanks for the help, the great application and your time.               Re: Different timezone settings for each elog, posted by gary holman on Wed Jun 10 22:02:33 2015  Still no luck changing the TZ for a single elog service.  I completed the following: * I added a new user/group - central-tz-user (id 1010) * changed user TZ to central, su as user and confirmed CDT via 'date'                Re: Different timezone settings for each elog, posted by gary holman on Thu Jun 11 01:32:26 2015  Okay, I missed the obvious... sudo -u central-tz-user (start elog) gary   Is ELOG sending out cookies?, posted by David Pilgram on Wed Jun 10 14:25:16 2015  On my linux box, every time I select a thread, or start a new entry etc, I see that one or many cookies are sent. On a terminal, I get the message Received unknown cookie "CalciumDisplayParams"       Re: Is ELOG sending out cookies?, posted by Stefan Ritt on Wed Jun 10 15:35:14 2015  Cookies are sent from your browser. ELOG has no influence on what the browser sends where. Probably you run your calender at the same machine where ELOG is running, so all the cookies your calender app stores in your browser are sent to ELOG as well. ELOG just complains about something it does not know, but otherwise this message can be simply ignored. Of course you can delete your cookies in your browser, but after the next call to your calendar app they          Re: Is ELOG sending out cookies?, posted by David Pilgram on Wed Jun 10 15:48:57 2015  Hi Stefan, Thanks for the explanation.  I realised it was just an error message of no real import, but it can get irritating at times. Stefan   Formatting multiple datetime entries, posted by Edmund Hertle on Wed May 27 14:22:11 2015  Hey in one of my measurement logbooks I'm using two datetime entries (for start and end time of a measurement). The entries are created automatically by the       Re: Formatting multiple datetime entries, posted by Stefan Ritt on Wed Jun 10 11:52:47 2015  [quote="Edmund Hertle"]Hey in one of my measurement logbooks I'm using two datetime entries (for start and end time of a measurement). The entries are created automatically by the          Re: Formatting multiple datetime entries, posted by Neal Grafton on Wed Jun 10 12:48:41 2015  [quote="Stefan Ritt"][quote="Edmund Hertle"]Hey in one of my measurement logbooks I'm using two datetime entries (for start and end time of a measurement). The entries are created automatically by the             Re: Formatting multiple datetime entries, posted by Stefan Ritt on Wed Jun 10 12:52:48 2015  [quote="Neal Grafton"] Also, is there a way of automatically displaying the difference in Hrs mins between Time start and Time End?[/quote]             Re: Formatting multiple datetime entries, posted by Stefan Ritt on Wed Jun 10 12:56:58 2015  [quote="Neal Grafton"]Also, is there a way of automatically displaying the difference in Hrs mins between Time start and Time End?[/quote] I guess you want to do some more complex calculations, like adding the running times, etc. This goes beyond the scope of elog. You can however export elog                Re: Formatting multiple datetime entries, posted by Neal Grafton on Wed Jun 10 13:00:07 2015  [quote="Stefan Ritt"][quote="Neal Grafton"]Also, is there a way of automatically displaying the difference in Hrs mins between Time start and Time End?[/quote] I guess you want to do some more complex calculations, like adding the running times, etc. This goes beyond the scope of elog. You can however export elog   elconv deletes everything, posted by Konstantin Olchanski on Wed May 20 01:49:37 2015  Converting from elog 2.9.something to new elog 3.1.0 elogd refuses to start, instructs running elconv in one logbook. When I do so, elconv converts a existing mhttpd-style elog entries to the new format (the corresponding new-format entries already exist)       Re: elconv deletes everything, posted by Stefan Ritt on Wed Jun 10 11:39:23 2015  > - elogd should not tell us to run elconv when both old-style and corresponding new-style elog entries exist I removed that check completely. The old format was used up to 2002, so I expect that all users have upgraded in meantime.   Timstamp button in ckedit inserts an incorrect string ( elogd 3.1.0-2), posted by David Wallis on Thu May 28 17:28:20 2015  I just updated to the latest official release (V3.1.0-2411f95) and have this problem: The Time Stamp button pastes the logbook name when "Time format" is not specified in elogd.cfg, and when it is set to "%m/%d/%Y       ELOG Forum: drafts cannot be deleted, posted by Andreas Luedeke on Fri May 29 09:46:11 2015  I wanted to reply to the post "Three problems..." and then changed my mind.  But since this logbook does not allow to delete entries (not even my own) I was neither able to remove the draft nor the final entry.          ELOG Forum: drafts cannot be deleted, posted by Stefan Ritt on Tue Jun 9 17:09:22 2015  > Another strange thing: the draft got submitted when I hit the "Back" button after reopening it. Well, this is a problem indeed. When edit entries now, drafts gets saved regularly, overwriting your original entry. This is a limitation of the elog database,             ELOG Forum: drafts cannot be deleted, posted by Andreas Luedeke on Wed Jun 10 10:43:02 2015  > > Another strange thing: the draft got submitted when I hit the "Back" button after reopening it. >  > Well, this is a problem indeed. When edit entries now, drafts gets saved regularly, overwriting your original entry.                 ELOG Forum: drafts cannot be deleted, posted by Stefan Ritt on Wed Jun 10 10:55:00 2015  > I think it would be nice to have three options: > - "Submit": making the draft entry a "real" entry, with an ID > - "Abort": keeping the entry as a draft entry as it currently is (or was 10 sec ago)       Re: Timstamp button in ckedit inserts an incorrect string ( elogd 3.1.0-2), posted by David Wallis on Thu Jun 4 18:12:43 2015  Additional info: "Time format = %Y" results in "2015" being pasted into the edit window when I hit the "time stamp" button.          Re: ckeditor "Insert Timestamp" bug (was: Three problems with elogd 3.1.0-2), posted by Andreas Luedeke on Fri Jun 5 19:08:17 2015  I can confirm that there is currently a problem with the ckeditor "Insert Timestamp" button. It apparently calls javascript code in ckeditor/plugins/timestamp/plugin.js to catch a string from the URL "../../?cmd=gettimedate" (I think this is one too many "../", but anyway). if you try this for the Forum: https://midas.psi.ch/elogs/Forum/?cmd=gettimedate it             Re: ckeditor "Insert Timestamp" bug (was: Three problems with elogd 3.1.0-2), posted by David Wallis on Fri Jun 5 23:02:06 2015  Andreas, I too was able to track the problem down to the "gettimedate" function in elogd.c. It looks like the code is using a variable named "str" for several different purposes. I haven't had a chance to do any testing, but my suspsicion is that the size of the dynamically allocated                Re: ckeditor "Insert Timestamp" bug (was: Three problems with elogd 3.1.0-2), posted by Stefan Ritt on Mon Jun 8 12:02:30 2015  Indeed the "str" variable at the gettimedate function had the wrong string size, so that all date strings got truncated at 8 characters. That's what you've seen. Also the ../../?cmd=gettimedate was wrong and it should be ./?cmd=gettimedate. I committed the fix to GIT so it will be   subject line bug on resumit elog entries as new?, posted by Jacky Li on Fri May 29 22:32:20 2015  Hi, I updated an old elog entry and resubmit it as new by checking the box resubmit as new.   Does the subject line should said it is a "New ELOG entry" instead of "Updated ELOG entry"?  Thank you.       Re: subject line bug on resumit elog entries as new?, posted by Stefan Ritt on Tue Jun 9 12:51:07 2015  I fixed both issues, now resubmitting an entry or submitting a new entry both yields "New LEOG entry". Jacky Li wrote: Hi,          Re: subject line bug on resumit elog entries as new?, posted by David Pilgram on Tue Jun 9 16:17:06 2015  Hi Stefan, I see that you've updated the elog running this forum today, 5 versions after you reported fixing the "A new elog entry has been entered" and "An old elog entry has been updated" issue.  But the emails coming out are still all of the "An old elog entry...", rather             Re: subject line bug on resumit elog entries as new?, posted by Stefan Ritt on Tue Jun 9 16:46:48 2015  Any better now? David Pilgram wrote: Hi Stefan,                Re: subject line bug on resumit elog entries as new?, posted by David Pilgram on Tue Jun 9 16:51:55 2015  Hi Stefan, The email sent from here had he expected (correct) message "A new ELOG entry..." Thanks, David.                   Re: subject line bug on resumit elog entries as new?, posted by Jacky Li on Tue Jun 9 22:31:59 2015  Hi, I compiled the 3.1.0-2 source rpm from the download area.  Unless there is a minor release, I think the problem is still there.  Thank you.                      Re: subject line bug on resumit elog entries as new?, posted by Stefan Ritt on Wed Jun 10 08:13:50 2015  Making a new release takes me about an hour (compile under Windows, Linux, Mac OSX), so I don't do it for each little change. If you want to follow the development closely, I recommend that you learn to compile elog from the GIT repository. It's pretty easy: a git pull, followed by a make and    Problem with a draft message, posted by David Pilgram on Tue Jun 9 17:17:11 2015  Hi Stefan, I had started to write a completely different bug report, but then realised I had not checked a detail.  I had written about one sentence.  So I decided to abort the message, and hit the "back" button.  Only I found that this had created a new entry in the elog listings.        Re: Problem with a draft message, posted by David Pilgram on Tue Jun 9 17:21:25 2015  Just to comment that I submitted the entry below by pressing the "Back" button! David Pilgram wrote: Hi Stefan,          Re: Problem with a draft message, posted by David Pilgram on Tue Jun 9 17:23:27 2015  Just to comment that the expected emails that one would have expected with the last two entries have either been held up or simply have not been generated and sent - both the preceeding entries were submitted by using the "Back" button, this time I'll use the "Submit" button, which should generate a email.             Re: Problem with a draft message, posted by Stefan Ritt on Tue Jun 9 19:35:28 2015  Just read what I wrote at elog:67983 David Pilgram wrote: Just to comment that the expected emails that one would have expected                Re: Problem with a draft message, posted by David Pilgram on Tue Jun 9 20:26:00 2015  I missed or don't remember that post.  My vote is replace "Back" with "Delete" - or "Abort" Stefan Ritt wrote: Just read what I wrote at elog:67983   logout to external page, posted by Christof Hanke on Wed May 6 11:00:14 2015  Hi Stefan, I am happy to see that you include the webserver authentication. So I can now login at some other page and then access elog.       Re: logout to external page, posted by Stefan Ritt on Tue Jun 9 16:09:39 2015  I implemented it, but actually called it Logout to URL = <URL> Christof Hanke wrote: Hi Stefan,          Re: logout to external page, posted by Christof Hanke on Tue Jun 9 16:58:28 2015  Yes, I saw it on bitbucket, also all the commits. Thanks! Stefan Ritt wrote: I implemented it, but actually called it    Documentation of the webserver authentication, posted by Christof Hanke on Wed May 6 12:31:04 2015  Hi Stefan, here is a draft of how you could describe the webserver authentication in your docs. T/Christof       Re: Documentation of the webserver authentication, posted by Stefan Ritt on Tue Jun 9 16:57:06 2015  Also this made it now to the docs. Thanks. Christof Hanke wrote: Hi Stefan,   parse a correctly the username in save_user_config when using Webserver authentication, posted by Christof Hanke on Wed May 6 15:13:11 2015  Hi Stefan,   When we use Webserver authentication, we have the correct username already in the variable http_user.       Re: parse a correctly the username in save_user_config when using Webserver authentication, posted by Stefan Ritt on Tue Jun 9 15:44:49 2015  Hi Christof, thanks for the patch, I merged it into the current HEAD. /Stefan   Attribute not updated, posted by Francois Cloutier on Wed May 13 14:58:46 2015  Good day, I'm populating 2 fields based on the Option set in a third one.       Re: Attribute not updated, posted by Francois Cloutier on Wed May 13 15:19:55 2015  I also tried with : {1, 53} Preset #Parution = 1 {2, 54} Preset #Parution = 2       Re: Attribute not updated, posted by Andreas Luedeke on Thu May 14 02:02:45 2015  Hi Francois, as far as I know there is a limit on the number of conditions you can use (See elog:67303). I guess you did hit that limit.          Re: Attribute not updated, posted by Francois Cloutier on Thu May 14 02:27:58 2015  > Hi Francois, > as far as I know there is a limit on the number of conditions you can use (See elog:67303). > I guess you did hit that limit.             Re: Attribute not updated, posted by Andreas Luedeke on Thu May 14 04:59:03 2015    > Seriously, I really hope It could make it... Could you try it on your side ?                Re: Attribute not updated, posted by Francois Cloutier on Thu May 14 05:08:06 2015  >   > > Seriously, I really hope It could make it... Could you try it on your side ? >                    Re: Attribute not updated, posted by Midas User on Tue Jun 9 15:28:53 2015  > I saw in the doc that an attribute cant be bigger than 100 char. but I couldn't figure the maximum size for options...  I'm wondering if the issue comes from the browser not refreshing correctly or if its elog..   edit somebody else's draft, posted by Konstantin Olchanski on Wed May 20 01:54:55 2015  this elog offers me to edit a draft message, then yells at me "only some other user can edit this draft!!!". methinks I should only be offered to edit draft messages that I own or I can edit. K.O.       Re: edit somebody else's draft, posted by David Pilgram on Wed May 20 22:12:49 2015  > this elog offers me to edit a draft message, then yells at me "only some other user can edit this draft!!!". > methinks I should only be offered to edit draft messages that I own or I can edit. K.O. I find it odd that I can see someone elses draft, but never one that I am in the middle of composing (using a          Re: edit somebody else's draft, posted by Stefan Ritt on Fri May 22 13:50:31 2015  > > this elog offers me to edit a draft message, then yells at me "only some other user can edit this draft!!!". > > methinks I should only be offered to edit draft messages that I own or I can edit. K.O. > I find it odd that I can see someone elses draft, but never one that I am in the middle of composing (using a       Re: edit somebody else's draft, posted by Midas User on Tue Jun 9 15:22:03 2015  > this elog offers me to edit a draft message, then yells at me "only some other user can edit this draft!!!". > methinks I should only be offered to edit draft messages that I own or I can edit. K.O.   RSS Feed Not Providing Time Stamps For datetime Attributes, posted by Kamen Nikolov on Fri May 8 00:18:12 2015  Hello, I am using the RSS feed feature of Elog (V2.9.0-2396). I have a couple of attributes of type "datetime" (Start Time and Stop Time). I don't have a "Time Format" statement, so just using the default format. I am passing the Start Time and Stop Time attributes to       Re: RSS Feed Not Providing Time Stamps For datetime Attributes, posted by Kamen Nikolov on Tue May 26 22:03:05 2015  Can anyone help? Do I need to do something different or could this possibly be a bug that is fixed in a newer version? Thanks, Kamen          Re: RSS Feed Not Providing Time Stamps For datetime Attributes, posted by Andreas Luedeke on Wed May 27 10:50:41 2015  Hi Kamen, I've just tried it for V3.1.0 (6ab0fd5) and the described behaviour is unchanged. It is even worse if you don't specify the "RSS Title": datetime attributes are just displayed as seconds of the epoch then. I think this is a feature of ELOG at the moment. You'll either need to dig into the code yourself or wait for Stefan to fix it.   I          Re: RSS Feed Not Providing Time Stamps For datetime Attributes, posted by Stefan Ritt on Tue Jun 9 13:22:25 2015  I fixed the problem in the current GIT version. /Stefan Kamen   Fixed text, posted by Neal Grafton on Tue May 26 10:38:36 2015  I'd like to fix text or table in the subject field that can't be deleted or moved.  Can that be done in config? Example -  Time Off:       Re: Fixed text, posted by Andreas Luedeke on Tue May 26 11:26:12 2015  Dear Neal, I don't understand your example. There is no such thing as a "subject field". You can define an attribute called "subject", like in this logbook. But I would guess that you want to have five attributes "Time Off", "Reason", etc. that cannot be altered after an entry has been created? That's easy. Or do you want to protect entries with specific content not          Re: Fixed text, posted by Neal Grafton on Tue May 26 12:34:44 2015  Sorry I call this field that you write in the subject field, a little confusing. So is there anyway to fix the indicated words in place in this typing space so you can enter the text you want next to them but be unable to delete them. (does this make sense?)             Re: Fixed text, posted by Andreas Luedeke on Wed May 27 08:41:05 2015  Hi Neal, you can preload words into one attribute field, but one field is either editable or not, you cannot protect single words in a field. But the ELOG way to solve this would be to have multiple attributes: you would get one entry field for each attribute. Just look at this logbook: it has the attributes Icon, Author, Author Email, Category, OS, ELOG Version and Subject. You can change the content                Re: Fixed text, posted by Neal Grafton on Wed May 27 08:51:23 2015  Andreas We are still playing around with ideas, just thought I'd ask, didn't think it was possible. We are ok with setting attributes but this is new to us as yet so may have more questions later.                   Side effects of draft messages (was Fixed text), posted by Andreas Luedeke on Wed May 27 08:54:27 2015  Hi Stefan, I got an answer to a forum entry before I actually finished writing my post! It is obviously possible to reply to a draft message. I think it would be excellent if draft messages would only be shown to their authors (except maybe in case of an anonymous author). It feels wrong if I watch people while they making an entry ;-) Anyway, it is just an idea. Cheers Andreas                        Side effects of draft messages (was Fixed text), posted by Stefan Ritt on Tue Jun 9 13:01:50 2015  I changed it such that drafts are not shown at all in ELOG. The only way you realize them is if you hit "new", and you will be prompted if there is any pending draft. Andreas   LDAP docs, posted by Stephen G on Thu Jun 4 00:08:56 2015  Could someone point me to the LDAP configuration docs, I searched to no avail.  I'm sure there is some big red ldap config button it, but I just can't find it.       Re: LDAP docs, posted by David Wallis on Thu Jun 4 16:25:42 2015  This is what I've been able to figure out, in terms of the elogd.cfg file: LDAP server = server.domain:389 LDAP userbase = ou=people,o=domain.com,dc=domain,dc=com          Re: LDAP docs, posted by Stephen G on Thu Jun 4 19:36:31 2015  Thank you, I am looking to do LDAPS over 636 where would the certificate go (Does it go in the SSL folder?). David Wallis wrote: This is what I've been able             Re: LDAP docs, posted by Stefan Ritt on Tue Jun 9 12:40:44 2015  I do not officially support LDAP, since I don't have any server to test it. So it comes as a third party's contibution from https://github.com/vykozlov/elog-ldap. To my knowlede LDAPS has not been implemented. You could post an issue the the github repository to ask the original author. /Stefan   Emails generated by Elog, posted by David Pilgram on Fri Jun 5 12:28:21 2015  I am one who received an email every time there is a new entry in this forum. I have just noticed that since May 20, every email contains the message "An old ELOG entry has been updated: " whereas before that date, the vast majority say "A new ELOG entry has been submitted: "       Re: Emails generated by Elog, posted by Stefan Ritt on Fri Jun 5 12:34:32 2015  I acknowledge these two bugs and will fix them soon. David Pilgram wrote: I am one who received an email every time there is a new entry in          Re: Emails generated by Elog, posted by Stefan Ritt on Tue Jun 9 12:11:19 2015  I fixed both issues in the current GIT version. Please double check it. Stefan Ritt wrote: I acknowledge these two bugs and will fix them soon.   Different way CSS files are handled, posted by Stefan Ritt on Fri Jun 5 14:24:34 2015  Hi, I just implemented a different way CSS files are handled in ELOG. Previously, we had the default.css, which could be adjusted for specific needs. Some people did that (like myself). So I changed a few colors etc. When I now implement a new feature in elog,       Re: Different way CSS files are handled, posted by Andreas Luedeke on Fri Jun 5 19:01:05 2015  Hi Stefan, there is a little problem with the Makefile (on SL5 and SL6): the following line:         @$(INSTALL) -m 0644 themes/default/* $(ELOGDIR)/themes/default/          Re: Different way CSS files are handled, posted by Stefan Ritt on Tue Jun 9 09:39:14 2015  Ok, fixed again. Andreas Luedeke wrote: Hi Stefan,   Auto save feature not working on 3.1.0, posted by David Wallis on Fri Jun 5 23:10:27 2015  Auto-saving does not seem to be working. In the config file, I have the following: Save drafts = 1 Autosave = 10   option transfer, posted by Neal Grafton on Fri Jun 5 11:52:43 2015  Can the chosen text in a dropdown menu be automatically transfered (copied) to this Text box?       Re: option transfer, posted by Stefan Ritt on Fri Jun 5 12:01:01 2015  No. Neal Grafton wrote: Can the chosen text in a dropdown menu be automatically transfered          Re: option transfer, posted by Neal Grafton on Fri Jun 5 13:06:22 2015  OK Thanks I was trying to save the operator repeatedly typing in standard messages.               Re: option transfer, posted by Stefan Ritt on Fri Jun 5 13:19:43 2015  There are browser extensions for that like "Autofill Forms" for Firefox. You can even link text templates to a single key. Neal Grafton wrote: OK Thanks             Re: option transfer, posted by Andreas Luedeke on Fri Jun 5 19:35:34 2015  Why would you transfer the message to the text box?   You can have a "Message" attribute, which is an option list. If the first option "Custom" is chosen, then you get an additional field "Custom Message". We have an attribute "Entry type", there we could add the type "Message", if the attribute should not exist for other types of entries.   As   ELOG Version field in elogs/Forum, posted by Andreas Luedeke on Fri May 29 09:38:40 2015  Hi Stefan, could we change the format of the "ELOG Version" field in this logbook, that one can enter the full git revision number?       Re: ELOG Version field in elogs/Forum, posted by Stefan Ritt on Fri Jun 5 10:18:38 2015  > Hi Stefan, > could we change the format of the "ELOG Version" field in this logbook, that one can enter the full git revision > number?   Duplicate: LDAP docs, posted by Stephen G on Thu Jun 4 00:10:32 2015  This is a duplicate, made by mistake.   Could someone point me to the LDAP configuration docs, I searched to no avail.  I'm sure there is some big red ldap config button it,   elogd moves elog entries, posted by Konstantin Olchanski on Wed May 20 01:59:17 2015  elogd 3.1.0 moves all elog entries into year-named subdirectories. this feature makes it incompatible with older elogs and so should be clearly mentioned in the documentation, in the release announcement and in the release and migration notes. K.O.       Re: elogd moves elog entries, posted by Andreas Luedeke on Wed May 20 11:59:59 2015  > elogd 3.1.0 moves all elog entries into year-named subdirectories. this feature makes it incompatible with older elogs and so should be clearly mentioned in the documentation, > in the release announcement and in the release and migration notes. K.O.          Re: elogd moves elog entries, posted by David Pilgram on Wed May 20 12:52:31 2015  > > elogd 3.1.0 moves all elog entries into year-named subdirectories. this feature makes it incompatible with older elogs and so should be clearly mentioned in the documentation, > > in the release announcement and in the release and migration notes. K.O.             Re: elogd moves elog entries, posted by Andreas Luedeke on Wed May 20 18:46:27 2015  > Stefan told me that the change was because some users were having thousands of yymmdda.log files > in the logbook directories, and that sorting them into subdirectories by year at least did something to bring some  > order.  Possibly to get around the lazy archivers, I suspect.                Re: elogd moves elog entries, posted by David Pilgram on Wed May 20 19:05:43 2015  > > Stefan told me that the change was because some users were having thousands of yymmdda.log files > > in the logbook directories, and that sorting them into subdirectories by year at least did something to bring some                    Re: elogd moves elog entries, posted by Andreas Luedeke on Thu May 21 10:59:07 2015  I had no intention of causing any offence with my lazy archiving comment - hope I didn't, sorry if I did. No offence taken :-) Personally, I would have found it useful to put the attachments into a separate directory - or at least to allow the possibility. Elog as it stands sometimes can, and sometimes cannot cope with that functionality - and even to try means messing             Re: elogd moves elog entries, posted by Konstantin Olchanski on Wed May 20 20:03:06 2015  > Stefan told me that the change was because some users were having thousands of yymmdda.log files > in the logbook directories                Re: elogd moves elog entries, posted by David Pilgram on Wed May 20 22:08:31 2015  > > Stefan told me that the change was because some users were having thousands of yymmdda.log files > > in the logbook directories >           Re: elogd moves elog entries, posted by Andreas Luedeke on Thu May 21 12:13:21 2015  > > elogd 3.1.0 moves all elog entries into year-named subdirectories. this feature makes it incompatible with older elogs and so should be clearly mentioned in the documentation, > > in the release announcement and in the release and migration notes. K.O.             Re: elogd moves elog entries, posted by Konstantin Olchanski on Sat May 23 02:53:31 2015  >  > "News for each version can be seen in the changelog (->http://midas.psi.ch/elog/download/ChangeLog)" >    elogd complains about unknown cookies, posted by Konstantin Olchanski on Wed May 20 01:45:09 2015  elogd is spewing these messages about unknown cookies: Received unknown cookie "is_returning"       Re: elogd complains about unknown cookies, posted by Stefan Ritt on Fri May 22 13:59:41 2015  > elogd is spewing these messages about unknown cookies: >  > Received unknown cookie "is_returning"          Re: elogd complains about unknown cookies, posted by Konstantin Olchanski on Sat May 23 02:49:22 2015  > > elogd is spewing these messages about unknown cookies: > >  > > Received unknown cookie "is_returning"   Entry size too large for email notification, posted by Jacky Li on Tue May 19 12:26:39 2015  Hi, I am doing an inline image that is about 2.2 MB.  When I do a submit, I got the following message: Error sending Email via <i>"<email server>"</i>: Entry size too large for email notification.       Re: Entry size too large for email notification, posted by Stefan Ritt on Fri May 22 13:43:14 2015  The size is defined by the variable MAX_CONTENT_LENGTH in elogd.c which is set to 10 MB. But email attachments are encoded in ASCII form, so they take useually 3-4 times the space of the binary format. If you have problems with large emails, you can use the option "Email Format = 111" which causes only the names of attachments to be included in email notifications. Users can then still click on the elog link inside the email notification and   this elog errors sending email, posted by Konstantin Olchanski on Wed May 20 01:52:23 2015  this elog gives errors sending mail through PSI email server. (did not capture the error messages, sorry). K.O.   csv import timestamp, posted by Ferdinand Gassauer on Wed May 13 22:03:37 2015  I have to import a csv with a date field, which represents the creation date this date should be used as "date" timestamp which is set automatically, otherwise all entries get the current datetime as timestamp         Re: csv import timestamp, posted by Andreas Luedeke on Thu May 14 02:19:53 2015  Hi Ferdinand, and that is exactly what happens when you import a csv file with a date field: the creation date ($entry time) of the imported entries will be used from the "Date" column in the file. I've just tried it and it works like a charm. Did you have any problems doing it? Cheers Andreas          Re: csv import timestamp, posted by Ferdinand Gassauer on Thu May 14 07:01:23 2015  Thanks what is the format of the Date field in the csv file ? My Date is date and not datetime.              Re: csv import timestamp, posted by Andreas Luedeke on Thu May 14 22:16:03 2015  Hi Ferdinand, "import" is meant to be used for files that have been exported with "find". Therefore it is not very flexible with the date format. Todays date should look like that: "Thu  14 May 2015 22:12:00 +0200". You have to convert your file that the date matches this format (BTW: I found this out by using the find - export feature; it may depend on a local configuration.) Cheers Andreas   Elogd synchronisation with remote server, posted by Francois Cloutier on Thu May 14 02:35:15 2015  I came accross the admin guide and I was reading / searching for a way to sync logbooks across sites... elogd mention "-m" and "-M" ... not elog but elogd... with that description : synchronize logbook(s) with remote server       Re: Elogd synchronisation with remote server, posted by Andreas Luedeke on Thu May 14 05:13:34 2015  > I came accross the admin guide and I was reading / searching for a way to sync logbooks across sites... > elogd mention "-m" and "-M" ... not elog but elogd... with that description : > synchronize logbook(s) with remote server   "Leave Page" pop-up when "Submit" entry, posted by Andreas Luedeke on Tue May 12 03:25:45 2015  I have a little problem with elogd 3.1.0. The problem persists up to the latest ELOG version, even in the development branch (V3.1.0-8196b81):       Re: "Leave Page" pop-up when "Submit" entry, posted by Stefan Ritt on Tue May 12 11:27:52 2015  Thanks for the "boiling-down" of your config file. That helped me to reproduce the error quickly. It only occurs if you have a date/time attribute which is hidden as a conditional attribute. This is a unusual combination, that's why I haven't seen that bug before. Actually some  JavaScript code checks the validity of the date attribute, but since it is conditionally not there, the JavaScript code crashes, which triggers the dialog          Re: "Leave Page" pop-up when "Submit" entry, posted by Andreas Luedeke on Wed May 13 01:40:21 2015  > Thanks for the "boiling-down" of your config file. That helped me to reproduce the error quickly. It only occurs if you have a date/time attribute which is hidden as a conditional attribute. This is a unusual combination, that's why I haven't seen that bug before. Actually some  > JavaScript code checks the validity of the date attribute, but since it is conditionally not there, the JavaScript code crashes, which triggers the dialog             Re: "Leave Page" pop-up when "Submit" entry, posted by Stefan Ritt on Wed May 13 06:58:12 2015  > Apparently it was less work to fix than to isolate it ;-) Well, I also spend like an hour on it.   Remote entries with empty messages possible?, posted by Edmund Hertle on Fri May 8 17:45:24 2015  Hey, I want to submit an entry to elog remotley using the "elog" command. For example: elog -h elog-server-adress -l EO -a Fill=111       Re: Remote entries with empty messages possible?, posted by Stefan Ritt on Mon May 11 13:15:54 2015  The "command does not respond" means that the program starts reading in the main message text from the console. You can type several lines of text, and finish it off by hitting Ctrl-D (Ctrl-Z under Windows). I see your point of having empty texts. Indeed the "" on the command line does not work presently, so you have to add a space as a       Re: Remote entries with empty messages possible?, posted by Andreas Luedeke on Mon May 11 22:51:44 2015  Hi Edmund, Stefan already supplied a fix, but you could as well use a workaround: provide an empty file as text. The following works for Linux: elog -h elog-server-adress -l EO -a Fill=111 -m /dev/null   Problem with autosave functionality when combined with no 'edit' button, posted by Thomas Lindner on Tue May 5 07:33:50 2015  We recently tried upgrading the ND280 elog instance to elog 3.1.0. [1] We seem to have some problems with this 'auto-save' functionality.  Specifically, it doesn't seem to play nice with the fact that we prefer to disable user's ability to edit old messages.  So we have (up to now), had the following set of commands specified in elogd.ccfg       Re: Problem with autosave functionality when combined with no 'edit' button, posted by Andreas Luedeke on Tue May 5 11:01:36 2015  Hi Thomas, just my two cent: as a quick workaround (for now) you could restrict editing messages to a short time range, like 30 minutes. That would cover most cases of draft messages. Restrict edit time = 0.5   But I agree that          Re: Problem with autosave functionality when combined with no 'edit' button, posted by Stefan Ritt on Tue May 5 12:09:53 2015  Arghhhh! Guess how many people asked me for the autosave feature! I worked really hard on it (including an airplane flight to Japan!), not the next guy comes "can we disable that feature?".              Re: Problem with autosave functionality when combined with no 'edit' button, posted by Andreas Luedeke on Tue May 5 12:17:24 2015  Oups, now I feel almost a little bit sorry for asking     But thank you anyway!!!        Re: Problem with autosave functionality when combined with no 'edit' button, posted by Stefan Ritt on Tue May 5 12:05:47 2015  I changed the code such that editing of draft messages is always possible, even if the "edit" command is not allowed otherwise. Update is in GIT. Please check if that works at ND280. Thomas   Load attribute options from attributes in another logbook, posted by Francois Cloutier on Mon May 4 22:28:37 2015  Hi again, Hope I'm not draining to much time from you guys !       Re: Load attribute options from attributes in another logbook, posted by Andreas Luedeke on Tue May 5 10:54:54 2015  > Hi again, > Hope I'm not draining to much time from you guys ! >    Subst Attributes..., posted by Francois Cloutier on Fri May 1 21:19:18 2015  Good day, I'm new to Elog and I find it really nice and straight foward... I still have a few questions that I couldn't address reading the manuals.       Re: Subst Attributes..., posted by Andreas Luedeke on Mon May 4 13:23:55 2015  Hi Francois, welcome to the community! I'll try to answer your questions inline (Numbering them would have been a good idea ;-): - I'm creating a logbook with a lot of attributes. I would like to know if there is a way to name (display) my attribute differently then it's original name. That way I could program $attrib1; $attrib2, etc, and map a name to display the column accordingly... Is it something possible ?           Re: Subst Attributes..., posted by David Pilgram on Mon May 4 14:10:08 2015  Hi Francois and Andreas, On Francois' first question, I wonder if Francois is using attrib1, attrib2... as the actual attribute names in the config file.  If this is the case, Francois, you can name attributes with suitable names in the configuration file and dictate which ones appear in the List and Threaded             Re: Subst Attributes..., posted by David Pilgram on Mon May 4 15:13:08 2015  I only saw Andreas' edited version of the original enquiry, so I didn't see the orignal config file under discussion - so most of my previous entry is totally pointless.  Sorry about that. David       Re: Subst Attributes..., posted by Stefan Ritt on Mon May 4 15:44:07 2015  Indeed there was a bug when you have "Show Text = 0". I fixed that in the current GIT version. I also hide the "Preview" button if "Show text = 0" since it really makes no sense there. I made a Windows Patch 3.1.0-3 which  ontains this fix.          Re: Subst Attributes..., posted by Francois Cloutier on Mon May 4 16:03:19 2015  Wow !!! Im impressed :):):) I didn't expect such a fast reply !!! Thanks alot Stefan, I will try it right away !!             Re: Subst Attributes..., posted by Andreas Luedeke on Tue May 5 09:22:23 2015  > Wow !!! Im impressed :):):) I didn't expect such a fast reply !!! >  > Thanks alot Stefan, I will try it right away !!   elogd lost entry database without restart during file system trouble, posted by Andreas Luedeke on Thu Apr 30 09:54:17 2015  I'm running ELOG since several years with rather heavy usage. Last week I've upgrades from 3.0.0 to 3.1.0 and this week I had twice the same problem: elogd lost the index for old entries and showed empty logbooks, without having restarted.       Re: elogd lost entry database without restart during file system trouble, posted by Stefan Ritt on Thu Apr 30 13:01:29 2015  First, I can only fix problems which are reproducible. Can we do another power outage at PSI again? But seriously, I guess what happened is that elog sees an empty directory when the AFS server   Odd behaviour when attaching a file to an entry, posted by David Pilgram on Sun Apr 12 21:12:29 2015  Having installed v3.1.0 on a test logbook, I find that I can browse and select a file, but when I click on the "Upload" button, I get a pop-up message from the browser asking me: "This page is asking you to confirm that you want to leave - data you have entered may not be saved."       Re: Odd behaviour when attaching a file to an entry, posted by Stefan Ritt on Thu Apr 23 15:13:06 2015  This problem has been fixed in Version 3.1.0-2. Please upgrade. David Pilgram wrote: Having installed v3.1.0 on a test logbook, I find that I can browse          Re: Odd behaviour when attaching a file to an entry, posted by David Pilgram on Thu Apr 23 15:37:37 2015  Thanks Stefan, that did the trick. Had a bit of an effort with the git repository, though, kept getting 403 errors when tried the git clone https://bitbucket.org/ritt/elog as per the "download" page.   Max Logbooks for Email notify, posted by Oliver Kleinau on Wed Apr 8 11:40:27 2015  Hi, we've got 109 logbooks in Elog. Whenever I set a notify for all logbooks in configuration menu it is limited to 73 entrys. After saving the changes the rest of the entrys are cut off.       Re: Max Logbooks for Email notify, posted by Oliver Kleinau on Fri Apr 10 08:37:19 2015  It seems to be the GET buffer of the elog-Server. The GET statement is cut off after &sub_lb72=1&sub_ eg. 1000 chars. Oliver Kleinau wrote: Hi,          Re: Max Logbooks for Email notify, posted by Oliver Kleinau on Fri Apr 10 09:59:42 2015  It was str variable in function process_http_request in elogd.c. This should have the size of received buffer. PROBLEM SOLVED!!!             Re: Max Logbooks for Email notify, posted by Stefan Ritt on Wed Apr 22 13:40:19 2015  Ok, I fixed this in the current GIT version. You might check if that works for you. Oliver Kleinau wrote: It was str variable in function process_http_request in elogd.c.   ELOG Version 3.1.0 announcement, posted by Stefan Ritt on Thu Apr 2 15:44:33 2015  This is an announcement for the ELOG version 3.1.0 being released just now. Among several bug fixes and an improved Drag & Drop interface for attachments, it contains a long awaited "autosave" feature. Let's assume that you write an ELOG entry, and keep the window open for a longer time (like to write some shift notes over several hours).       Re: ELOG Version 3.1.0 announcement, posted by Banata Wachid Ridwan on Wed Apr 15 04:02:41 2015  congrats, any detail changelog? I assume in software packages? is it save just install and overwrite the old version? Stefan          Re: ELOG Version 3.1.0 announcement, posted by Stefan Ritt on Wed Apr 15 09:01:04 2015  The changelog is here: http://midas.psi.ch/elog/download/ChangeLog It is save to install the new version over the old one.     Strange browser behaviour with chrome?, posted by Tim Schel on Mon Mar 30 14:46:28 2015  Hello there, I have been using ELOG for 4 years now and all of a sudden I see a strange behaviour.        Re: Strange browser behaviour with chrome?, posted by Stefan Ritt on Mon Mar 30 17:48:06 2015  The (correct) display tells me that the colours are user-defined, probably by the configuration option  Style <attribute> <value> = <style>          Re: Strange browser behaviour with chrome?, posted by Andreas Luedeke on Tue Mar 31 11:36:25 2015  [quote="Stefan Ritt"]The (correct) display tells me that the colours are user-defined, probably by the configuration option  Style <attribute> <value> = <style>             Re: Strange browser behaviour with chrome?, posted by Stefan Ritt on Tue Mar 31 11:44:27 2015  [quote="Andreas Luedeke"]the content of a particular entry can change the rendering. If you have an HTML end tag like </table> or </font> in your entry, then the display after that entry may be spoiled.[/quote]                Re: Strange browser behaviour with chrome?, posted by Andreas Luedeke on Wed Apr 1 10:54:27 2015  [quote="Stefan Ritt"][quote="Andreas Luedeke"]the content of a particular entry can change the rendering. If you have an HTML end tag like </table> or </font> in your entry, then the display after that entry may be spoiled.[/quote]                   Re: Strange browser behaviour with chrome?, posted by Stefan Ritt on Wed Apr 1 11:41:31 2015  [quote="Andreas Luedeke"]If the content has been added with the "elog" command as HTML then it can contain mismatching HTML tags, can't it? I don't see how this could be avoided by ELOG, unless you want to do a full HTML syntax check of all new and modified entries.[/quote]                      Re: Strange browser behaviour with chrome?, posted by Andreas Luedeke on Wed Apr 1 18:31:28 2015  [quote="Stefan Ritt"][quote="Andreas Luedeke"]If the content has been added with the "elog" command as HTML then it can contain mismatching HTML tags, can't it? I don't see how this could be avoided by ELOG, unless you want to do a full HTML syntax check of all new and modified entries.[/quote]                         Re: Strange browser behaviour with chrome?, posted by Andreas Luedeke on Wed Apr 1 18:39:14 2015  Proof of principle ;-)                         Re: Strange browser behaviour with chrome? </table>, posted by Stefan Ritt on Wed Apr 1 20:25:21 2015  [quote="Andreas Luedeke"]Now I'm confused: if I create an entry with "elog -n 2 ...", then I put HTML code into elog and it is displayed as HTML. This HTML code does NOT convert a "<" into "<", otherwise you could not display any HTML. But of course this code can be wrongly formatted, for example it can contain a </table> tag without a <table> tag before it. This will definitely spoil             Re: Strange browser behaviour with chrome?, posted by Tim Schelfhout on Wed Apr 1 11:01:14 2015  Thank you all of you for your notes ... Anyway I have no time at the present to debug this ... at the level of configuration file.  I discovered however that the Incognito Mode of Chrome does NOT seem to have this problem??   Permission to view, posted by Banata Wachid Ridwan on Fri Mar 20 08:22:38 2015  Hello, related to the permission, is it possible to set permission ?, so only the owner or certain people can view list all logbok and regular member can only see their own logbook, not the others.       Re: Permission to view, posted by Andreas Luedeke on Fri Mar 20 09:25:11 2015  Yes, it is possible. And explained in ELOG documentation. Banata Wachid Ridwan wrote: Hello,          Re: Permission to view, posted by Banata Wachid Ridwan on Fri Mar 27 05:39:29 2015  I just read all administrator guide especially in : http://midas.psi.ch/elog/config.html#access and I didnt find it that exactly match with my need, or maybe I read wrong section :P             Re: Permission to view, posted by Stefan Ritt on Fri Mar 27 07:26:45 2015  You need Password file = logbook.pwd Login user = <name of allowed user(s)>                Re: Permission to view, posted by Banata Wachid Ridwan on Fri Mar 27 08:19:56 2015  so if that is the solution, all user that not allowed cannot login and cannot fill logbook in my case, user still can login and fill logbook but cannot see other user's data on the same logbook, so user only see their own data. but few members have a special permission to see all.                   Re: Permission to view, posted by Stefan Ritt on Fri Mar 27 08:24:47 2015  No. Banata Wachid Ridwan wrote: so if that is the solution, all user that not allowed cannot   test, posted by Tim Schel on Wed Mar 25 10:36:15 2015  zezerze   Trouble to install ELOG V3.0.0-72a8401 in XP SP3, posted by Pedro Acosta on Mon Mar 23 17:02:03 2015  Hi, It´s not possible to install the last version V3.0.0-72a8401 over XP SP3, the previous version works well.  For Windows Vista Home Basic SP2 work fine the last version.        Re: Trouble to install ELOG V3.0.0-72a8401 in XP SP3, posted by Pedro Acosta on Tue Mar 24 19:08:34 2015  Maybe, nobody uses XP SP3 but i get Win32 invalid aplication error.  Not work! Pedro Acosta wrote: Hi,   Configure default time range in 'Find', posted by Eoin Butler on Fri Jan 16 13:41:18 2015  Hello, We have a very large elog database, and executing a 'Find' on the whole range takes several minutes, locking other users out of the elog for that time. It would be very nice if there could be an option to set the default value of the 'search last ...' option on the find page. Thanks       Re: Configure default time range in 'Find', posted by Stefan Ritt on Fri Jan 16 14:29:58 2015  Have you tried in the "Find" page to set a start date, or select "Show last: Month". This shoudl speed up searching quit a bit. Eoin Butler wrote: Hello,          Re: Configure default time range in 'Find', posted by Eoin Butler on Mon Jan 19 11:09:31 2015  Yes, this works, but users inevitably forget to select "last week" or whatever, and just leave it blank, which means their search unintentionally takes a long time. It would be much better if one could configure it to default to something "fast". Stefan             Re: Configure default time range in 'Find', posted by David Pilgram on Mon Jan 19 17:17:32 2015  Hi there, In the "Find" page, I changed the default of the "Show last" drop down box in the Entry Date section from the (unstated) "All time" to "Day", and added back in an "All Time" option at the very bottom.  This gives a default of searching the last day, and one has to think and select the period of time to search back on.                Re: Configure default time range in 'Find', posted by David Pilgram on Tue Jan 20 00:58:58 2015  It has just occurred to me that you may also have to check the non-English files, (./resorces/eloglang_xxxx) as this change introduces a new term "All time" that would need translation into the other lexicons.                     Re: Configure default time range in 'Find', posted by Stefan Ritt on Thu Jan 22 16:30:07 2015  I added a new optoin "Show last default = <days>", where one can pre-set the "Show last" drop-down box. I think this is a good idea, so now people can configure their elog to a certain default in this parameter. Of course all settings in the Find page are AND'ed together, so if one restricts the search to tha last week, but then looks for a date more in the past, the result will be zero by definition. The change is in the GIT                      Re: Configure default time range in 'Find', posted by Eoin Butler on Thu Jan 22 17:04:03 2015  This looks like exactly what I wanted, thanks! Stefan Ritt wrote: I added a new optoin "Show last default = <days>", where                      Re: Configure default time range in 'Find', posted by David Pilgram on Thu Jan 22 17:32:16 2015  If my coding had been up to it, I would have done this and submitted...  thanks Stefan. Stefan Ritt wrote: I added a new optoin "Show last default = <days>", where                      Re: Configure default time range in 'Find', posted by David Pilgram on Sun Mar 15 16:41:49 2015  Hi Stefan, There's one pre-set value you forgot to include in this, which is the genuinely required "Show last all time".  I archive many logbooks by years, and so for the year 2005 (say), searching by anything other than all time will always bring up zero results.  And it gets                         Re: Configure default time range in 'Find', posted by David Pilgram on Sun Mar 15 17:53:44 2015  Law of unintended consequences came into play.  If you use 0, then on the results page it says "Restricted search to last 0 Days".  So that also needs tweeking, and that's really put my c coding (or lack of it) to the test.  But I've changed that phrase to "Unrestricted search" followed by blank for when the parameter "last" is 0.                         Re: Configure default time range in 'Find', posted by Andreas Luedeke on Mon Mar 16 07:16:56 2015  Hi David, isn't the empty string "" doing already exactly what you want to achieve with "Show last all time"? It is at least in my logbook. Cheers Andreas David Pilgram wrote: Hi Stefan,                            Re: Configure default time range in 'Find', posted by David Pilgram on Mon Mar 16 13:51:11 2015  Hi Andreas, Yes, the empty string does exactly that, in the drop down menu, but before my changes, I could not set it to be the default setting in the configuration file.  In an archived logbook, it's perfectly possible for "all time" to be the only sensible value.  I tried "Show last default                               Re: Configure default time range in 'Find', posted by Andreas Luedeke on Tue Mar 17 07:04:44 2015  Hi David, I was confused because one normally does not need to include a line in the configuration to set a default value. A default is exactly what you get if you don't specify anything in the configuration  But I think I've figured it out: you were overriding the default in the global section for all logbooks and                                  Re: Configure default time range in 'Find', posted by Stefan Ritt on Tue Mar 24 15:49:28 2015  Show last default = 0 always worked, even in my original code. It was just not documented. I added that. Andreas   How to change configuration already set properly, posted by Banata Wachid Ridwan on Wed Mar 18 04:25:14 2015  Hello, I have configuration file that already set on running logbook but I want to change for example category and Atributes, and some other setting to match our language If I just simply change category, or other option, when I log in on logbook, It wont show as I though. When I change back to original setting,       Re: How to change configuration already set properly, posted by Andreas Luedeke on Wed Mar 18 09:34:46 2015  ELOG does not provide you with a simple mechanism to rename attributes in existing entries. If you rename an attribute in the configuration, then you need to adapt all existing entries by replacing the name in all *a.log files on the server. Or you could set-up a second logbook with the renamed attributes, export all entries from the first logbook (use "Find") and import these entries in the second logbook.          Re: How to change configuration already set properly, posted by Banata Wachid Ridwan on Fri Mar 20 08:11:15 2015  ok. what *a.log ? is it all database from elog? so I need to open it with text editor and replace all . am I Correct?               Re: How to change configuration already set properly, posted by Andreas Luedeke on Fri Mar 20 09:23:57 2015  ELOG is storing all entries as text files. Open text files and use search and replace in text editor. Or instead: export with Find and import in another ELOG with renamed attributes. Banata   Is it possible to only send an email based on the value of multiple attributes?, posted by Darren Hollinrake on Mon Mar 9 17:03:38 2015  My current setup notifies users if downtime = yes.  [CODE]Email Downtime Yes = user1@xyz.com, user2@xyz.com[/CODE]       Re: Is it possible to only send an email based on the value of multiple attributes?, posted by Stefan Ritt on Mon Mar 9 17:24:42 2015  [quote="Darren Hollinrake"]My current setup notifies users if downtime = yes.  [CODE]Email Downtime Yes = user1@xyz.com, user2@xyz.com[/CODE]       Re: Is it possible to only send an email based on the value of multiple attributes?, posted by Andreas Luedeke on Thu Mar 12 09:53:57 2015  [quote="Darren Hollinrake"]My current setup notifies users if downtime = yes.  [CODE]Email Downtime Yes = user1@xyz.com, user2@xyz.com[/CODE]   Elog stability with multiple users, posted by Alan Grant on Wed Feb 18 04:57:32 2015  Are there any known or reported daemon stability issues with an increase of concurrent users logged in to view and search entries, while the elog client is also adding 5 to 10 new entries every minute during a peak 2-hour period each day?       Re: Elog stability with multiple users, posted by Stefan Ritt on Thu Feb 26 10:39:58 2015  By desing, there is no collision between different users, since all requests are executed in sequence (single thread). The only problem is that the server becomes unavailable for others if it executes a long search. This is why most users of large lobooks restrict their search to let's say the last month or so by default. This speeds up the search and limits the dead time for others. This can be done via the show          Re: Elog stability with multiple users, posted by Alan Grant on Fri Feb 27 23:06:53 2015  We have reduced entries for Search reasons by removing older text files and that seems to speed up things.  However, a recurring problem persists during peak period where the service connection is lost (site says "Not  found" on both client and directly on server), and it cannot be restarted or killed. Only a reboot of the 2010              Re: Elog stability with multiple users, posted by David Pilgram on Sat Feb 28 14:08:43 2015  I grant that this may be a complete red herring, but your description below  - not available and having to reboot -  might have another explanation.  At least in Linux.                Re: Elog stability with multiple users, posted by Stefan Ritt on Mon Mar 2 08:06:38 2015  Being not able to kill a server running in an endless loop seems strange to me. If you put any program artificially into an endless loop, you can kill it via "kill -9 <pid>". Have you tried that? The only exception I  can imagine is if there is a problem in the file system, like your elog logbooks are mounted via NFS or some other remote filesystem, and you have a problem   Enter past date for logbook, posted by Banata Wachid Ridwan on Wed Feb 25 03:28:24 2015  Is it possible to enter past date in logbook I forgot to enter log yesterday, is it possible to add up now?       Re: Enter past date for logbook, posted by Stefan Ritt on Wed Feb 25 07:52:21 2015  No. The date/time tag is there to actually document the time when the log was made. If you are late, you are late. Banata Wachid Ridwan wrote: Is it possible to enter past date in logbook       Re: Enter past date for logbook, posted by Andreas Luedeke on Wed Feb 25 08:41:59 2015  As an administrator of the logbook you could add an additional attribute, e.g. "when" of type datetime. Each entry would then have the unchangeable entry time and an addtional time, e.g. of the event you are describing in the entry. For more details look here: elog:67712   maximum attributes for drop down menu., posted by rob on Fri Feb 20 11:04:03 2015  We use a servername field to be able to select a server. When i entered my entire serverlist (574 entries), only 250 of them show up.       Re: maximum attributes for drop down menu., posted by David Pilgram on Fri Feb 20 16:18:36 2015  Hi Rob, I don't think the default number of 100 has ever changed.  However, you can change the number in the source   Fail to install in mac, posted by Alex on Fri Feb 13 16:43:00 2015  Hi   I am trying to install to mac 10.10.2 - everything works almost fine, but when I issue the sudo make install I get       Re: Fail to install in mac, posted by Stefan Ritt on Fri Feb 13 19:47:43 2015  Sorry I forgot to include the elogd.plist file in the distribution. I attached it to this entry, so just copy it into the elog root directory and run again "make install". /Stefan          Re: Fail to install in mac, posted by Alex on Fri Feb 13 20:36:59 2015  Thanks! now install works fine - but I cannot find how to open and start writing- I do   /usr/local/sbin/elogd             Re: Fail to install in mac, posted by Stefan Ritt on Fri Feb 13 21:18:46 2015  Point your browser to http://localhost:8080 as written in the documentation Alex wrote: Thanks! now install works fine - but I cannot find how to open and start   Link to full resolution image attachments, posted by Eric Quintero on Mon Jan 26 23:13:47 2015  Hi all, It's possible my question is entirely within the domain of CKeditor, but I figure it may also have something to do with how it's plugged into ELOG.        Re: Link to full resolution image attachments, posted by Stefan Ritt on Tue Jan 27 17:03:53 2015  Strange. If I attach a big image to this post (see below), I see the thumbnail, but when I click on it it, I get redirected to the full resolution image. No idea why it is not working for you. Eric          Re: Link to full resolution image attachments, posted by Eric Quintero on Wed Jan 28 17:18:08 2015  Stefan Ritt wrote: Strange. If I attach a big image to this post (see below), I see the thumbnail, but when I click on it it, I get redirected to the full resolution image. No idea why it is not working for you.             Re: Link to full resolution image attachments, posted by Eric Quintero on Fri Jan 30 22:45:02 2015  Since I am unable to attach an image to this logbook, I made a post over the the Linux Demo logbook showing an image that was uploaded with the CKeditor toolbar "Image" button that doesn't link to the full resolution image.  Incidentially, Dario Milicic's recent commit to the git repository (83a10a5), adds the exact functionality I'm looking for to drag-and-drop                Re: Link to full resolution image attachments, posted by Andreas Luedeke on Mon Feb 2 10:40:38 2015  If you add the picture in the HTML editor, then you can add any link you like. I don't see why the specific link to the full resolution picture should be the default. If you want to have it, why not just add it by hand? I took the liberty to edit your Linux Demo post accordingly. For attachments that is a completely different story, since you cannot add any links there, only ELOG can do this                   Re: Link to full resolution image attachments, posted by Eric Quintero on Wed Feb 4 08:51:37 2015  You make a valid point! My perspective is from my lab's specific use case, in which we often post plots of data in the body of the text, and it is useful for the ELOG-generated thumbnails to link to the full resolution plot. In previous versions, I believe this was the behavior. It would be convenient for my users                      Re: Link to full resolution image attachments, posted by Stefan Ritt on Wed Feb 4 13:32:21 2015  I put the functionality you requested into the current GIT version of ELOG. It works now with Drag & Drop, but not (yet) with the toolbar uploader. Eric Quintero wrote: You make a valid point!   SMTP Host Error and export to CSV question, posted by Banata Wachid Ridwan on Thu Jan 29 10:16:01 2015  Hello first of all, congrats for bring back the forum after down for sometimes, :D but seems my old account is broken, I cant login with that anymore, so I make new account and strangely I can make identical account like the       Re: SMTP Host Error and export to CSV question, posted by Andreas Luedeke on Thu Jan 29 14:20:13 2015  If you have more than one topic it is better to do more than one post. I did not understand your first question. You should not have a line "SMTP host= " if you don't want to send any email. Have you tried "Suppress Email to users=1" to get rid of the error message?          Re: SMTP Host Error and export to CSV question, posted by Banata Wachid Ridwan on Fri Jan 30 03:12:33 2015  sorry for may bad english, not my natives :D for first question, I'll make it clear, after sometimes running elog, suddenly SMTP host error occured.             Re: SMTP Host Error, posted by Andreas Luedeke on Mon Feb 2 10:13:58 2015  You need to specify "Suppress Email to users=1" in the [global] section of the configuration. And it does matter if the letters are capitalized on not. Banata                Re: SMTP Host Error, posted by Stefan Ritt on Mon Feb 2 12:44:24 2015  That's not correct. Any option in the configuration file is case-insensitive. It should also not matter if the statement is under the logbook or in the [global] section.  What you probably made wrong is to write "supress email to users =1" instead "suppress                   Re: SMTP Host Error, posted by Andreas Luedeke on Tue Feb 3 06:48:32 2015  Hey, great: I've learned something new about elog! I always took great care to get the capitalization of the options correct  Stefan Ritt wrote:             Re: CSV question, posted by Andreas Luedeke on Mon Feb 2 10:29:15 2015  I've imported your export.csv file with OpenOffice 3.1.1 and with Excel 2010 and it both works fine (see attachments). You should consult some Microsoft Helpdesk: ELOG works fine :-) PS: I'm no English native speaker either. I have been told that international business language is anyway not English, but "Bad English"                 Re: CSV question, posted by Stefan Ritt on Mon Feb 2 10:39:33 2015  If you enter ELOG text body entreis as HTML, they will be exported as HTML, and thus you have the <p> tags. To avoid them, enter the ELOG text body as plain text, or just remove them in your spreadsheet via find and replace (find "<p>" and replace by nothing). Ther is NO HTML to text converter in ELOG, so they cannot be stipped automatically. And maybe other people DO want the full HTML there.                   Re: CSV question, posted by Banata Wachid Ridwan on Wed Feb 4 09:10:32 2015  so I assume there is a way to force member to use plain text mode, right?  :D how to make my member force to use plain text? thanx for help sir,                      Re: CSV question, posted by Stefan Ritt on Wed Feb 4 13:06:52 2015  Allowed encoding = 1 As written in the documentation (which you should read before asking questions here) Banata   Permission on reply, posted by Banata Wachid Ridwan on Fri Jan 30 03:15:25 2015  is it possible to set reply only for certain member? all members can submit lobook, but only certain member can make reply on it thanx for help and so sorry if I have too many question :D       Re: Permission on reply, posted by Stefan Ritt on Fri Jan 30 09:30:35 2015  You can use the switches Alloe reply = <user list> Deny reply = <user list>          Re: Permission on reply, posted by Banata Wachid Ridwan on Wed Feb 4 09:48:32 2015  so let say I just want to add certain members for replying logbook, so I just need to add parameter Allow reply = <user list> and automatically all members not listed will be forbidden, am I correct? I dont need to specify members for "Deny Reply" right ?             Re: Permission on reply, posted by David Pilgram on Wed Feb 4 10:33:16 2015  Hi Banata, If you only have a few people who can reply, then use Allow reply = <user list>   calculate the value of one attribute depending upon the value of other attribute., posted by dev on Thu Jan 22 17:27:47 2015  I HAVE A LOGBOOK WHICH KEEPS THE RECORD OF ALL FAULT BOOKED BY DIFFERENT SUBSCRIBER.THIS LOGBOOK HAS THREE ATTRIBUTE DOWNTIME,UPTIME & TOTAL DURATION (DATE &TIME FORMAT) . I WANT TO CALCULATE THE TOTAL DURATION AUTOMATICALLY WHENEVR UPTIME VALUE IS GIVEN AND IF THE UPTIME IS NOT GIVEN IT SHOULD CALCULATE DEPENDING UPON THE SYSTEM PRESENT TIME.PLEAS EXPLAIN IT WITH EXAMPLE.       Re: calculate the value of one attribute depending upon the value of other attribute., posted by Andreas Luedeke on Mon Jan 26 15:56:41 2015  If you have the following elogd.cfg: Attributes = START, END, DURATION subst DURATION = $shell( /usr/local/elog/diff.sh \"$START\" \"$END\") Show Attributes Edit = START,          Re: calculate the value of one attribute depending upon the value of other attribute., posted by dev on Mon Jan 26 19:24:02 2015  I tried that It is not calculating  and it is giving the error "Shell execution not enabled via -x flag ".I started elogd -x from command prompt  it still gives the same error.             Re: calculate the value of one attribute depending upon the value of other attribute., posted by Andreas Luedeke on Tue Jan 27 15:59:59 2015  Yes, I forgot to mention that you need to enable shell script execution by starting the server with "elogd -x". Before you start elogd from the command line you need to shutdown any running elogd; otherwise the port is blocked and the command line elogd cannot start: "sudo /sbin/service elogd stop"                Re: calculate the value of one attribute depending upon the value of other attribute., posted by dev on Tue Jan 27 17:18:17 2015  I am working in window system.Itries using elogd  stop and start  command  but it is always showing it is running.Kindly help  me  thanking you. Andreas                   Re: calculate the value of one attribute depending upon the value of other attribute., posted by Andreas Luedeke on Wed Jan 28 09:57:11 2015  Unfortunately I cannot help you with Windows. But you must have started the service somehow in the first place: that is where I would expect you can stop it as well. dev   how to calculate the time , posted by dev on Mon Jan 26 15:46:04 2015  I HAVE A LOGBOOK WHICH KEEPS THE RECORD OF ALL FAULT BOOKED BY DIFFERENT SUBSCRIBER.THIS LOGBOOK HAS THREE ATTRIBUTE DOWNTIME,UPTIME & TOTAL DURATION (DATE &TIME FORMAT) . I WANT TO CALCULATE THE TOTAL DURATION AUTOMATICALLY WHENEVR UPTIME VALUE IS GIVEN AND IF THE UPTIME IS   filter with or operation/TIME DURATION CALCULATION , posted by dev on Wed Jan 21 02:15:12 2015  1.I HAVE A ELOG BOOK WITH TWO ATTRIBUTE 'FROM' &'TO'. I WANT TO USE A FILTER WHICH WILL SEARCH FOR A VALUE  IN BOTH ATTRIBUTE .KINDLY HELP ME. 2. HOW TO CALCULATE THE TIME DURATION  AUTOMATICALLY BASED ON TWO ATTRIBUTES 'START TIME' AND 'STOP TIME' .       Re: filter with or operation/TIME DURATION CALCULATION , posted by Andreas Luedeke on Thu Jan 22 08:35:23 2015    dev wrote: 1.I HAVE A ELOG BOOK WITH TWO ATTRIBUTE 'FROM' &'TO'.   Problem with embedded Iframes, posted by Eric Quintero on Mon Jan 12 23:26:18 2015  We've upgraded our ELOG installation to v3, and we really like the new CKeditor. However, one of my users has noticed a problem when using Iframe HTML elements with CKeditor; namely that the HTML is not present when trying to edit the post, and saving the post erases the HTML.  I was able to reproduce this fairly simply, by trying to embed a youtube video. I would create a new post, click the "Source" view in       Re: Problem with embedded Iframes, posted by Stefan Ritt on Tue Jan 13 10:10:56 2015  This is an issue with CKEditor, not with ELOG.  Maybe this helps: http://drupal.stackexchange.com/questions/96069/ckeditor-removes-iframes-in-editor-after-update-to-6-x-1-14   Translation problem, posted by Banata on Tue Jan 6 03:04:51 2015  Hello, I try to translate elog using 2.9 version, I never try on 2.9 until new version 3.0 released I translate 2 files here : elcode_indonesia.html and eloglang.indonesia, after new version 3.0 I try to load those translation to the latest version using :       Re: Translation problem, posted by Stefan Ritt on Tue Jan 6 09:20:44 2015  Maybe  language = indonesia instead          Re: Translation problem, posted by Banata on Wed Jan 7 08:04:08 2015  sorry, this is the elog.cfg on my server Theme = default Comment = Logbook Balai Sabo             Re: Translation problem, posted by Stefan Ritt on Wed Jan 7 09:07:49 2015  The Language = ... setting has to be under the [global] section as written in the documentation: http://midas.psi.ch/elog/config.html Banata                Re: Translation problem, posted by Banata on Fri Jan 9 08:59:38 2015  ah really thanx, this is the one I missed, oh btw, can I send this language to you?, if you want to add it as distribution on next version maybe, Indonesian language Stefan                   Re: Translation problem, posted by Stefan Ritt on Fri Jan 9 09:12:12 2015  Sure. Banata wrote: ah really thanx, this is the one I missed,                      Re: Translation problem, posted by Banata on Mon Jan 12 04:04:57 2015  here you go language translation for Indonesia, if you find any mistakes or missing things please contact me Stefan Ritt wrote: Sure.                         Re: Translation problem, posted by Stefan Ritt on Mon Jan 12 11:10:33 2015  I also need elcode_indonesia.html and eloghelp_indonesia.html. Banata wrote: here you go language translation for Indonesia, if you find any mistakes                            Re: Translation problem, posted by Banata on Tue Jan 13 02:48:50 2015  oh, okay, elcode_indonesia.html for eloghelp still on progress, :D Stefan                               Re: Translation problem, posted by Banata on Tue Jan 13 04:06:48 2015  this is eloghelp Banata wrote: oh, okay, elcode_indonesia.html   using a predefined format with predefined informations that an user should fill at each run of data , posted by Iolanda Matea on Fri Jan 9 17:30:31 2015  Hello! I was wondering if it is possible (and how) to define a template (something equivalent to an excel table with some required informations to be filled) that opens each time one wants to make a new entry of a given type, e.g., I want this template to open only when the informations concern data       Re: using a predefined format with predefined informations that an user should fill at each run of data , posted by Stefan Ritt on Mon Jan 12 11:24:00 2015  In ELOG you can define "attributes", so take one attribute for each informaiton you need. The flag these attributes as required via "Required attributes = ...". If you only want this attributes for certain occations (like data taking in your case), you can either do a separato logbook for data taking, or use "conditional attributes" to make these attributes only show up for data taking.   How to upgrade elog?, posted by Banata on Mon Jan 5 10:27:33 2015  any specified task to upgrade elog? I have elog deployed in windows and linux centos. please help me.       Re: How to upgrade elog?, posted by Stefan Ritt on Mon Jan 5 10:59:28 2015  No. Just install the new version over the old one. Banata wrote: any specified task to upgrade elog?          Re: How to upgrade elog?, posted by Banata on Tue Jan 6 02:19:04 2015  thanx, so in linux I just need to install over the old ones? I thought there are additional step on linux, hehehe thanx for the help sir Stefan   Strange Behavior in "Find" Function, posted by Eric Quintero on Tue Dec 16 01:15:40 2014  Hi all, We've been happily using ELOG for years, but ran into an odd problem when replacing the old Solaris server that ran the ELOG with a newer box running Ubuntu.        Re: Strange Behavior in "Find" Function, posted by Stefan Ritt on Wed Dec 17 14:40:19 2014  Eric Quintero wrote: Hi all, We've been happily using ELOG for years, but ran into an odd problem when replacing the old Solaris server that ran the ELOG with a newer   menu download, posted by pudi astuti on Fri Nov 28 03:15:17 2014  yes I mean functionally of elog or how to download files at elog?   Error report while submitting the entry, posted by harish amin on Mon Nov 24 18:29:34 2014   Dear Stefan, I am having a log book with the 5 logbooks. All other books are working fine except only one, every time while submitting the entry I am getting a error message.       Re: Error report while submitting the entry, posted by Stefan Ritt on Tue Nov 25 12:36:47 2014                            harish amin wrote:                                             Dear Stefan,          Re: Error report while submitting the entry, posted by harish amin on Wed Nov 26 12:49:12 2014                            Stefan Ritt wrote:                                                                      Re: Error report while submitting the entry, posted by Stefan Ritt on Wed Nov 26 13:18:36 2014                            harish amin wrote:                                                                         Re: Error report while submitting the entry, posted by harish amin on Wed Nov 26 19:36:08 2014    Stefan Ritt wrote:     menu download, posted by pudi astuti on Wed Nov 26 09:31:42 2014  dear stefan I have a problem how to bring up the menu page menu elog download?       Re: menu download, posted by Stefan Ritt on Wed Nov 26 12:23:01 2014                            pudi astuti wrote:                                            dear stefan   Defunct daemons, posted by David Pilgram on Sat Mar 29 12:14:11 2014  Hi Stefan and Andreas Yesterday I reported I had some issues with the latest elog: but now I can reproduce one.         Re: Defunct daemons, posted by David Pilgram on Sat Mar 29 13:14:44 2014  Further work suggests that the type of pdf file might matter, as I have now seen the defunct daemon after adding the first pdf file in an entry.          Re: Defunct daemons, posted by Konstantin Olchanski on Wed Nov 12 03:19:17 2014  Also see this in ALPHA at CERN. Eventually there are so many defunct elogd processes that the user runs out of "maxproc" quota and automatic submission of elog messages starts to fail. (and the users complain, reboot all computers, etc).             Re: Defunct daemons, posted by Konstantin Olchanski on Wed Nov 12 03:48:29 2014  > Also see this in ALPHA at CERN. > The elogd we use is this: https://bitbucket.org/ritt/elog/commits/44800a769b99599db7620779e2142b1161c694fc?at=master                Re: Defunct daemons, posted by Stefan Ritt on Mon Nov 24 13:24:27 2014  > Okey, found it. waitpid() in my_shell() is not protected against the periodic alarm signal. (UNIX signals are evil). Acknowledged. Thanks for the fix. I added it to the development branch.   Elogbook on windows 8, posted by Ciaran White on Wed Nov 12 11:03:37 2014  i have been using elogbook V2.7.6 on my XP machine for a number of years. I ahve recently upgraded to windows 8 and the reply function on my entries has changed. I can now see the previous entrys in HTML format rather than the reply box which used to appear and also my ability to upload attachments and paste working linls is removed. Do i need to upgrade to the latest version and do i ned to back up my previous entries and how do i do this?       Re: Elogbook on windows 8, posted by Stefan Ritt on Mon Nov 24 13:10:13 2014                            Ciaran White wrote:                                            i have been using elogbook V2.7.6 on my XP machine for a number of years. I ahve recently upgraded to   5.5.4 cannot decode AUTH parameter, posted by harish amin on Fri Nov 21 12:38:07 2014   Dear Team, I am having a log book and would like to activate the email notification. I have made the changes as per the guidelines but I am getting the error message while submitting the entry - Error       Re: 5.5.4 cannot decode AUTH parameter, posted by Stefan Ritt on Fri Nov 21 16:09:37 2014                            harish amin wrote:                                             Dear Team,          Re: 5.5.4 cannot decode AUTH parameter, posted by harish amin on Fri Nov 21 17:00:09 2014                            Stefan Ritt wrote:                                                                      Re: 5.5.4 cannot decode AUTH parameter, posted by harish amin on Sat Nov 22 14:50:35 2014                            harish amin wrote:                                                                         Re: 5.5.4 cannot decode AUTH parameter, posted by Yoshio Imai on Sat Nov 22 16:05:34 2014  [quote=harish amin]Dear Stefen, Please help me & reply on my request. Is my global config correct?[/quote]   How to insert new entry between two entries., posted by Daniel Roldan on Mon Nov 3 15:28:41 2014   I would like to put between two entries a new entry. My Users forgot to put a entry, and now they would like to put a new entry between olders entries. For Example:       Re: How to insert new entry between two entries., posted by David Pilgram on Mon Nov 3 17:14:44 2014                            Daniel Roldan wrote:                                             I would like to put between two entries a new entry.       Re: How to insert new entry between two entries., posted by Andreas Luedeke on Tue Nov 4 14:51:20 2014                            Daniel Roldan wrote:                                             I would like to put between two entries a new entry.   POODLE vulnerability, posted by Stefan Ritt on Fri Oct 24 12:51:00 2014  IMPORTANT SECURITY ANNOUNCEMENT Recently the POODLE vulnerability has been announced: http://en.wikipedia.org/wiki/POODLE  ELOG is prone to this vulnerability if it runs directly the SSL protocol and can be accessed from the internet. If ELOG runs behind an Apache proxy, and the Apache server has been correctly configured (disabled the SSLv23 protocols), ELOG is safe as well.   Network Questions, posted by Hal Proctor on Wed Oct 22 19:52:58 2014  Our network team is doing some upgrades and would like the following questions answered if possible. 1: Is the application able to communicate with a Domain controller running Windows Server 2012 R2?  And.... 2: Is the application able to function in a Windows 2008 R2 domain and forest functional level?  Thanks for your help, Hal       Re: Network Questions, posted by Stefan Ritt on Wed Oct 22 19:55:53 2014                            Hal Proctor wrote:                               Our network team is doing some upgrades and would like the following questions answered if possible.  1: Is the application   Sort by date prior to 2002, posted by Chris Jennings on Tue Sep 16 17:59:27 2014  I have an attribute formatted as a date (but not labeled as date) and is sorted as second priority. The sort works fine until I enter a date older than Jan 1st 2002. When I do this it is sorted as the latest. Is this a bug or simply not designed to use dates this old? Thanks in advance,       Re: Sort by date prior to 2002, posted by Chris Jennings on Tue Sep 16 18:05:41 2014                            Chris Jennings wrote:                                            I have an attribute formatted as a date (but not labeled as date) and is sorted as second priority. The sort works          Re: Sort by date prior to 2002, posted by Andreas Luedeke on Wed Sep 17 17:45:18 2014                            Chris Jennings wrote:                                                                                     Re: Sort by date prior to 2002, posted by Stefan Ritt on Mon Sep 22 14:39:10 2014                            Andreas Luedeke wrote:                                                            default font style, posted by Sara Vanini on Mon Sep 8 14:51:35 2014  Hi, is it possibile to set a default font style: format, font, size, color, etc? how? Thanks a lot       Re: default font style, posted by Stefan Ritt on Tue Sep 9 10:12:37 2014                            Sara Vanini wrote:                                            Hi,          Re: default font style, posted by Sara Vanini on Tue Sep 9 15:42:53 2014                            Stefan Ritt wrote:                                                                                     Re: default font style, posted by Stefan Ritt on Tue Sep 9 15:50:25 2014                            Sara Vanini wrote:                                                            , posted by on Thu Mar 23 22:14:14 152      Preset Text, posted by mike cianci on Fri Aug 22 23:10:28 2014  I have stripped my config file down to one command:   "Preset text = \\ssoelog\elog\templates\test2.txt" If I type the path "\\ssoelog\elog\templates\test2.txt" into my browser I see the contents of the file, which is the word  "YES"       Re: Preset Text, posted by Andreas Luedeke on Sun Aug 24 15:06:37 2014                            mike cianci wrote:                                            I have stripped my config file down to one command:   "Preset text = \\ssoelog\elog\templates\test2.txt"   Elog and Certs, posted by Chuck Brost on Fri Aug 1 22:46:09 2014  Elog V2.9.1-2435 if it matters.  It is time again to install the certs for SSL in Elog, and the standard openssl command line does not seem to produce the files that I need in order to get it working on my system.       Re: Elog and Certs, posted by Andreas Luedeke on Sat Aug 2 06:59:22 2014                            Chuck Brost wrote:                                            Elog V2.9.1-2435 if it matters.           Re: Elog and Certs, posted by Chuck Brost on Mon Aug 11 22:21:43 2014                            Andreas Luedeke wrote:                                     Preset Text, posted by mike cianci on Fri Aug 8 22:36:29 2014  Sorry for the novice question, but can anyone tell me where the ".txt" document is suppose to reside for the "Preset text" statement to find it? I have a "test.txt" document in the "Template" file but all "Preset text = test.txt" does is print "test.txt" in the comment section.       Re: Preset Text, posted by Andreas Luedeke on Sat Aug 9 06:40:35 2014                            mike cianci wrote:                                            Sorry for the novice question, but can anyone tell me where the ".txt" document is suppose to reside for   New entries remotely?, posted by Daniel Roldan on Tue Jul 29 16:20:16 2014   Hi all, I would like to create a new entry remotely. I would like that when the macro run, the macro automatically create a new entry in my Elog.       Re: New entries remotely?, posted by Stefan Ritt on Tue Jul 29 16:53:18 2014                            Daniel Roldan wrote:                                             Hi all,   Unable to resize images in browser, posted by Matthew Deller on Tue Feb 18 21:32:27 2014  I am unable to resize/ manipulate images in browser.  Image Magick detected Version: ImageMagick 6.6.9-7 2012-08-17. Output when running elog with verbose option shows buffer overflow when resize attempted:       Re: Unable to resize images in browser, posted by Stefan Ritt on Fri Feb 21 13:09:48 2014  [quote="Matthew Deller"]I am unable to resize/ manipulate images in browser.  Image Magick detected Version: ImageMagick 6.6.9-7 2012-08-17. Output when running elog with verbose option shows buffer overflow when resize attempted:          Re: Unable to resize images in browser, posted by Matt Deller on Thu Jun 19 09:35:20 2014  [quote="Stefan Ritt"][quote="Matthew Deller"]I am unable to resize/ manipulate images in browser.  Image Magick detected Version: ImageMagick 6.6.9-7 2012-08-17. Output when running elog with verbose option shows buffer overflow when resize attempted:   Strange Error, Service hangs when record is deleted., posted by Chuck Brost on Wed Jun 11 19:18:06 2014  I have 4 services running on a Windows Server 2008 R2 machines, 4 separate logs, only one of them is doing this, but that could be because only one of them is trying to delete records once they are posted, I cannot say. On that one log, everything runs fine until they try to delete a record, and they are doing it under the admin login, but the service hangs.    Passing html code for table using elog command, posted by Remington Tyler Thornton on Thu May 22 21:39:55 2014  Hey, I am testing out automated entries using elog on the command line. The file I pass has html code for a table; the resulting entry shows the html code for the table instead of generating the table. Is there a way to make elog parse the code to show a formatted table?        Re: Passing html code for table using elog command, posted by Andreas Luedeke on Mon May 26 09:55:06 2014                            Remington Tyler Thornton wrote:                                            Hey,   A couple of observations, posted by David Pilgram on Fri Mar 28 14:29:24 2014  Hi Stefan and Andreas, When I submitted the previous entry, I had an error message about not able to send via psxxxx.psi.ch come up as       Re: A couple of observations, posted by David Pilgram on Fri Mar 28 14:55:16 2014  I tried to attach a screenshot showing this, but kept getting a 502 bad gateway error. The message in the red banner is Error sending Email via <i>"psquad.psi.ch"</i>   Generation of .png files for attachments, posted by David Pilgram on Fri Mar 28 14:15:18 2014  Hi Stefan and Andreas, With the latest incremental version of elog (a738232), I have noticed that when attaching a pdf file, the   Problem with ELOG, posted by Markus Grosse-Kock on Thu Mar 13 11:34:58 2014  Hi, we have a problem. After windows updates, the elog service doesn´t start:       Re: Problem with ELOG, posted by Markus Grosse-Kock on Thu Mar 13 12:39:41 2014                            Markus Grosse-Kock wrote:                                            Hi,   XML import Error, posted by Donald on Thu Feb 27 15:15:55 2014  Hi   I've written a powershell script parse a html table that contains old log book data that i would like to import to a elog book.  I've attached       Re: XML import Error, posted by Andreas Luedeke on Mon Mar 3 15:42:29 2014                            Donald wrote:                                           Hi          Re: XML import Error, posted by Donald on Tue Mar 4 19:48:02 2014                            Andreas Luedeke wrote:                                                                      Re: XML import Error, posted by Donald on Tue Mar 11 15:17:36 2014                            Donald wrote:                                                                                        Author drop-down menu length, posted by Kay Graf on Mon Mar 10 12:15:07 2014  I am handling several ELOGs for medium-sized collaborations (scientific experiments) with a large number of authors (~250) and chose to have single-user access and entries for every author - in the config file, the "Options Author"-List contains ~150 name for now. However, the Author drop-down menu stops after ~100 names - is that a ELOG-webserver hard limit? I checked there is nothing strange in the author       Re: Author drop-down menu length, posted by Andreas Luedeke on Mon Mar 10 15:18:51 2014                            Kay Graf wrote:                                            I am handling several ELOGs for medium-sized collaborations (scientific experiments) with a large number of authors          Re: Author drop-down menu length, posted by Kay Graf on Tue Mar 11 09:19:06 2014                            Andreas Luedeke wrote:                                                            How to upload several images at once, posted by Alejandro Gomez on Wed Mar 5 03:58:51 2014   Hi I just want to know if there is a way to upload a bunch of images at once. I need to upload ~50 images per day and of course it is really tedious.  Thanks!!       Re: How to upload several images at once, posted by Stefan Ritt on Wed Mar 5 07:53:01 2014                            Alejandro Gomez wrote:                                             Hi   Google Places API AutoComplete, posted by Garret Delaronde on Fri Apr 26 19:00:07 2013   G'day everyone. Looking for some input on this idea. I work for an organization which uses elog extensively for day to day operations.       Re: Google Places API AutoComplete, posted by Stefan Ritt on Fri Feb 21 13:43:03 2014                            Garret Delaronde wrote:                                             G'day everyone.   Export entries to XLS or CSV?, posted by scogordo on Wed May 15 17:24:12 2013  I've been asked to export one of our logbooks to xls or csv. Doable? Thanks, Scott       Re: Export entries to XLS or CSV?, posted by Andreas Luedeke on Wed May 15 23:31:30 2013                            scogordo wrote:                                            I've been asked to export one of our logbooks to xls or csv. Doable?          Re: Export entries to XLS or CSV?, posted by Jim Tinlin on Thu May 30 22:52:51 2013                            Andreas Luedeke wrote:                                                                      Re: Export entries to XLS or CSV?, posted by Andreas Luedeke on Fri May 31 11:41:48 2013                            Jim Tinlin wrote:                                                                         Re: Export entries to XLS or CSV?, posted by Stefan Ritt on Tue Jun 4 12:38:01 2013                            Andreas Luedeke wrote:                                                                            Re: Export entries to XLS or CSV?, posted by Jim Tinlin on Tue Jun 4 16:17:22 2013                            Stefan Ritt wrote:                                                                            Re: Export entries to XLS or CSV?, posted by Jim Tinlin on Tue Jul 2 22:05:06 2013                            Stefan Ritt wrote:                                                                               Re: Export entries to XLS or CSV?, posted by Andreas Luedeke on Thu Jul 4 15:27:13 2013                            Jim Tinlin wrote:                                                                                  Re: Export entries to XLS or CSV?, posted by Stefan Ritt on Fri Feb 21 13:25:55 2014                            Andreas Luedeke wrote:                                                            Adaptation of the language, posted by Markus Grosse-Kock on Thu Feb 20 12:27:42 2014  Hello,   I want to change       Re: Adaptation of the language, posted by Stefan Ritt on Thu Feb 20 16:36:06 2014                            Markus Grosse-Kock wrote:                                            Hello,          Re: Adaptation of the language, posted by Markus Grosse-Kock on Thu Feb 20 17:37:06 2014                            Stefan Ritt wrote:                                                            Crash report involving propagate and replies, posted by Stephen on Tue Nov 26 16:24:39 2013  Using Elog 2.9.2 Elog crashes when making 10 replies, I narrowed the crash down to the Propagate Attributes setting. I have an attribute "Status" that can be toggled between "Open" and "Closed" and that propagates all       Re: Crash report involving propagate and replies, posted by David Pilgram on Tue Nov 26 21:49:42 2013                            Stephen wrote:                                           Using Elog 2.9.2          Re: Crash report involving propagate and replies, posted by Stephen on Wed Nov 27 15:22:37 2013                            David Pilgram wrote:                                           Re: Crash report involving propagate and replies, posted by Andreas Luedeke on Mon Dec 2 09:27:35 2013                            Stephen wrote:                                           Using Elog 2.9.2       Re: Crash report involving propagate and replies, posted by Andreas Luedeke on Mon Dec 2 09:58:42 2013                            Stephen wrote:                                           Using Elog 2.9.2          Re: Crash report involving propagate and replies, posted by Stephen on Mon Dec 2 23:02:45 2013                            Andreas Luedeke wrote:                                               Re: Crash report involving propagate and replies, posted by Andreas Luedeke on Tue Dec 3 11:30:43 2013                                         Stephen wrote:                                                                                     Re: Crash report involving propagate and replies, posted by Hung Dao on Fri Jan 3 21:33:40 2014                            Andreas Luedeke wrote:                                                                            Re: Crash report involving propagate and replies, posted by Stefan Ritt on Mon Jan 6 10:25:03 2014                            Hung Dao wrote:                                             I have been able to compile Elogd successfully in Windows with Visual Studio 2010 but not with                   Re: Crash report involving propagate and replies, posted by Andreas Luedeke on Mon Jan 6 10:32:43 2014                            Hung Dao wrote:                                                                                              Re: Crash report involving propagate and replies, posted by Hung Dao on Sun Jan 12 04:48:12 2014                            Andreas Luedeke wrote:                                                                                  Re: Crash report involving propagate and replies, posted by Stefan Ritt on Mon Jan 13 09:01:31 2014                                          I don't see it has crashed when testing your cfg.  However, one thing I must do is to comment out the alarm_handler function in order to compile the elogd successfully.  Otherwise, it shows an undefined alarm, see in the 2nd attachment.        Re: Crash report involving propagate and replies, posted by Stefan Ritt on Mon Jan 13 09:30:09 2014                            Stephen wrote:                                           Using Elog 2.9.2          Re: Crash report involving propagate and replies, posted by Stephen on Fri Jan 24 18:59:17 2014                            Stefan Ritt wrote:                                                   Re: Crash report involving propagate and replies, posted by Stephen on Wed Jan 29 17:13:55 2014                            Stephen wrote:                                                       Re: Crash report involving propagate and replies, posted by Hung Dao on Mon Feb 3 22:45:10 2014                            Stephen wrote:                                                           [Not] Submit on pressing enter key, posted by Daniel Campora on Mon Jan 20 19:15:24 2014  Hello community, I have a feature request for the form of the ELOG.       Re: [Not] Submit on pressing enter key, posted by Stefan Ritt on Tue Jan 21 13:17:52 2014                            Daniel Campora wrote:                                            Hello community,   Subject attribute in bold type - threaded display, posted by Paolo on Thu Jan 16 11:39:42 2014  Hi all, I am successfully using ELOG V2.9.2-2455 to manage several laboratory logs. I am looking for a way, if possible, to format the subject attribute in bold type while in thread display.       Re: Subject attribute in bold type - threaded display, posted by Andreas Luedeke on Thu Jan 16 19:11:58 2014                                         Paolo wrote:                                                         Hi all,             I am successfully using ELOG V2.9.2-2455 to manage          Re: Subject attribute in bold type - threaded display, posted by Stefan Ritt on Fri Jan 17 08:17:09 2014                            Andreas Luedeke wrote:                                                                   Re: Subject attribute in bold type - threaded display, posted by Paolo on Fri Jan 17 15:59:29 2014                            Andreas Luedeke wrote:                                                                           Users logged out?, posted by Grant on Tue Jan 14 21:50:50 2014   Hi All, I'm looking for a way (or if it is even possible?) for users to browse between logbooks without being logged out of their current logbook if they click on a logbook they are not authorised to access?   Compilation failure on Mac OSX 10.9, posted by A.G. Schubert on Tue Nov 5 23:21:52 2013  When compiling elog on OSX 10.9 (Mavericks), I get the error below. Elog will compile without error if I add -D_FORTIFY_SOURCE=0 to CFLAGS in Makefile, but I'm not sure whether this is a good idea.         Re: Compilation failure on Mac OSX 10.9, posted by Stefan Ritt on Wed Nov 6 09:04:32 2013                            A.G. Schubert wrote:                                            When compiling elog on OSX 10.9 (Mavericks), I get the error below.          Re: Compilation failure on Mac OSX 10.9, posted by A.G. Schubert on Thu Nov 7 02:18:17 2013                            Stefan Ritt wrote:                                                                      Re: Compilation failure on Mac OSX 10.9, posted by Stefan Ritt on Thu Nov 7 08:08:12 2013                            A.G. Schubert wrote:                                                                         Re: Compilation failure on Mac OSX 10.9, posted by Ed McNichol on Tue Jan 14 05:19:47 2014                            Stefan Ritt wrote:                                                                            Re: Compilation failure on Mac OSX 10.9, posted by Stefan Ritt on Tue Jan 14 08:15:19 2014                            Ed McNichol wrote:                                                            Due to Evernote web clipper, posted by John Haggerty on Tue Jan 7 04:28:28 2014  I investigated a little further the problem with fckedit in Chrome with the hints in the Chrome Developer Javascript window for debugging, and it seems the problem occurs when I have the Evernote web clipper extension enabled.  If I disable it, I am able to make entries on any server, otherwise the cursor is missing and there is no way to enter text as reported in an earlier thread that I inadvertently failed to reply to.   ELOG on Chrome on MacOS?, posted by John Haggerty on Thu Dec 19 19:42:48 2013  In the past couple of days, I seem to have developed a problem with making entries into elog's displayed with Chrome (the latest, 31.0.1650.63) on  Mac OS (10.9.1, the latest).  The problem occurs with attempting to edit or enter HTML encoded pages with fckedit; although pages render correctly  in list mode, if you try to edit or enter an entry, the page is blank, the cursor is missing, you can't see text or type new text.  I ran elogd -v by hand,       Re: ELOG on Chrome on MacOS?, posted by Stefan Ritt on Fri Dec 20 09:25:08 2013  > In the past couple of days, I seem to have developed a problem with making entries into elog's displayed with Chrome (the latest, 31.0.1650.63) on  > Mac OS (10.9.1, the latest).  The problem occurs with attempting to edit or enter HTML encoded pages with fckedit; although pages render correctly  > in list mode, if you try to edit or enter an entry, the page is blank, the cursor is missing, you can't see text or type new text.           Re: ELOG on Chrome on MacOS?, posted by John Haggerty on Fri Dec 20 13:38:09 2013  > > In the past couple of days, I seem to have developed a problem with making entries into elog's displayed with Chrome (the latest, 31.0.1650.63) on  > > Mac OS (10.9.1, the latest).  The problem occurs with attempting to edit or enter HTML encoded pages with fckedit; although pages render correctly   How to property install?, posted by Ryan Blakeslee on Sat Dec 14 00:22:52 2013   Hello, I have followed the very simple steps on the Download page for checking out and compiling from GIT.  That works perfect and there is no issue.         Re: How to property install?, posted by Andreas Luedeke on Mon Dec 16 11:16:33 2013                            Ryan Blakeslee wrote:                                             Hello,          Re: How to property install?, posted by Ryan Blakeslee on Tue Dec 17 21:00:33 2013                            Andreas  Luedeke wrote:                                                            Multiple tab, posted by Paulo Moraga on Thu Dec 12 15:10:43 2013  Hi noob question I was looking for a config but i cant make it, how to i make multitab logbook like this page?   Like in Discussion there are forum,config examples,contribution and vulnerabilities under it       Re: Multiple tab, posted by Paulo Moraga on Thu Dec 12 16:03:07 2013                            Paulo Moraga wrote:                                            Hi noob question I was looking for a config but i cant make it, how to i make multitab logbook like   Problem with space in name of eLog not seeing %20 and "+", posted by Tom C on Tue Nov 26 00:06:02 2013  My elog is named "Whatever Elog" so the URL generated is /Whatever+Elog . This works fine but when in the interface certain buttons generate this URL : /Whatever%20Elog  ...this URL fails.  It seems that elog does not recognize these ( + and %20 ) as the same which I believe they should be as part of HTTP request.       Re: Problem with space in name of eLog not seeing %20 and "+", posted by Stefan Ritt on Tue Nov 26 08:17:34 2013                            Tom C wrote:                                           My elog is named "Whatever Elog" so the URL generated is /Whatever+Elog . This works fine but when in the interface certain buttons          Re: Problem with space in name of eLog not seeing %20 and "+", posted by David Pilgram on Tue Nov 26 11:25:48 2013                            Stefan Ritt wrote:                                                                                     Re: Problem with space in name of eLog not seeing %20 and "+", posted by David Pilgram on Tue Nov 26 11:28:39 2013                            David Pilgram wrote:                                                                           Unwanted characters showing when using Bottom Text Login to a html file, posted by Hung Dao on Wed Nov 13 23:46:38 2013  When using Bottom Text Login to a html file showing some unwanted characters.  Also, the ELOG Version is longer displayed. Bottom Text Login = example.htm Attached are bottomtextlogin.jpg which shows the characters on the left and example.htm which I used.       Re: Unwanted characters showing when using Bottom Text Login to a html file, posted by Andreas Luedeke on Thu Nov 14 11:31:23 2013                            Hung Dao wrote:                               When using Bottom Text Login to a html file showing some unwanted characters.  Also, the ELOG Version is longer displayed.  Bottom Text          Re: Unwanted characters showing when using Bottom Text Login to a html file, posted by Hung Dao on Thu Nov 14 20:06:44 2013                            Andreas Luedeke wrote:                                                                                     Re: Unwanted characters showing when using Bottom Text Login to a html file, posted by Andreas Luedeke on Fri Nov 15 08:34:05 2013                            Hung Dao wrote:                                                                                        Re: Unwanted characters showing when using Bottom Text Login to a html file, posted by Hung Dao on Fri Nov 15 23:02:03 2013                            Andreas Luedeke wrote:                                                                           Inconsistent and long load times, posted by Fabian on Fri Nov 15 10:59:51 2013  We recently installed ELOG and it works pretty well, but the load times are rather inconsistent. Most of the time  it is very fast, but it also often hangs for around 5-10 seconds while loading. It seems to affect all parts of  the page that are returned at random, so sometimes the main html file will hang, sometimes the css file and        Re: Inconsistent and long load times, posted by Andreas Luedeke on Fri Nov 15 11:30:31 2013  > We recently installed ELOG and it works pretty well, but the load times are rather inconsistent. Most of the time  > it is very fast, but it also often hangs for around 5-10 seconds while loading. It seems to affect all parts of  > the page that are returned at random, so sometimes the main html file will hang, sometimes the css file and           Re: Inconsistent and long load times, posted by Fabian on Fri Nov 15 12:21:45 2013  > I'm not an expert in debugging web applications. Here are my two cent: > We once had a problem when we hosted very large logbooks (several 10 thousands of entries) that the server would run > out of real memory and was slowed down by swapping. Therefore my first idea would be to monitor the server: Is             Re: Inconsistent and long load times, posted by David Pilgram on Fri Nov 15 13:46:16 2013  > > I'm not an expert in debugging web applications. Here are my two cent: > > We once had a problem when we hosted very large logbooks (several 10 thousands of entries) that the server would run > > out of real memory and was slowed down by swapping. Therefore my first idea would be to monitor the server: Is   date and time, posted by David Pilgram on Wed Nov 13 13:36:48 2013  [13 Nov] As my threads have lots of replies, I end up with a forest of ">" characters which makes it difficult to read earlier quoted entries (what with word-wrapping of the browser).       Re: date and time, posted by Hal Proctor on Wed Nov 13 14:27:34 2013  > [13 Nov] > As my threads have lots of replies, I end up with a forest of ">" characters which makes it difficult to read > earlier quoted entries (what with word-wrapping of the browser). > I thought to replace the ">"s by a simple date entry prepended to the start of each reply. - much as I have > given at the top of this initial entry. > > So this is what I put in the config file: > > .... > Time          Re: date and time, posted by David Pilgram on Wed Nov 13 14:41:07 2013                            Hal Proctor wrote:                                            > [13 Nov] > As my threads have lots of replies, I end up with a forest of ">" characters which       Re: date and time, posted by Andreas Luedeke on Thu Nov 14 11:19:12 2013  > [13 Nov] > As my threads have lots of replies, I end up with a forest of ">" characters which makes it difficult to read > earlier quoted entries (what with word-wrapping of the browser).          Re: date and time, posted by David Pilgram on Fri Nov 15 13:43:18 2013  > > [13 Nov] > > As my threads have lots of replies, I end up with a forest of ">" characters which makes it difficult to read > > earlier quoted entries (what with word-wrapping of the browser).   Error when attempted to submit an entry, posted by Hung Dao on Wed Nov 13 16:11:18 2013  One of my users reported that he received this error when attempted to submit an editing entry.  Basically he is only one to edit this entry.  When go ahead to press the  button, the entry is updated successfully.  What cause and how to prevent this error not to populate?  Thanks       Re: Error when attempted to submit an entry, posted by Stefan Ritt on Wed Nov 13 16:31:28 2013                            Hung Dao wrote:                               One of my users reported that he received this error when attempted to submit an editing entry.  Basically he is only   kerberos authentication NOT working, posted by Fabio Sella on Wed Oct 30 17:57:38 2013  Hi guys, we configured a kdc server using OPENLDAP as backend. We installed on it elog and configured the Kerberos Authentication on one logbook as follows: Authentication = Kerberos, File       Re: kerberos authentication NOT working, posted by Hal Proctor on Fri Nov 1 14:14:03 2013                            Fabio Sella wrote:                                            Hi guys,          Re: kerberos authentication NOT working, posted by Andreas Luedeke on Mon Nov 4 15:07:40 2013                            Hal Proctor wrote:                                                                                     Re: kerberos authentication NOT working, posted by Olaf Kasten on Wed Nov 13 16:26:32 2013                            Andreas Luedeke wrote:                                                            Image attachments null in e-mails. Error log?, posted by Daniel Campora on Tue Jun 25 19:31:56 2013   Hi there :) I'm having a problem with the e-mail notification on my installation of elog. I'm testing the attachment upload with images, and it seems to work seamlessly. However upon posting, the e-mail notification sends a null attachment, instead of the image I would expect.       Re: Image attachments null in e-mails. Error log?, posted by Andreas Luedeke on Wed Jun 26 10:10:45 2013                            Daniel Campora wrote:                                             Hi there :)       Re: Image attachments null in e-mails. Error log?, posted by Stefan Ritt on Wed Jun 26 13:41:47 2013                            Daniel Campora wrote:                                             Hi there :)       Re: Image attachments null in e-mails. Error log?, posted by Stefan Ritt on Wed Nov 6 17:06:40 2013                            Daniel Campora wrote:                                             Hi there :)   "Show only new entries" stuck for one user, posted by Mark Campbell on Fri Nov 1 21:47:12 2013   For one user in our ELog installation the "Show only new entries" button seems to be stuck on one particular date and time " ...                           Re: "Show only new entries" stuck for one user, posted by Stefan Ritt on Tue Nov 5 13:40:58 2013                            Mark Campbell wrote:                                             For one user in our ELog installation the "Show only new entries" button seems to be          Re: "Show only new entries" stuck for one user, posted by Mark Campbell on Tue Nov 5 14:35:44 2013                            Stefan Ritt wrote:                                                                      Re: "Show only new entries" stuck for one user, posted by Mark Campbell on Tue Nov 5 15:25:59 2013                            Mark Campbell wrote:                                                                         Re: "Show only new entries" stuck for one user, posted by Mark Campbell on Tue Nov 5 20:04:11 2013                            Mark Campbell wrote:                                                            Attachment file names encoding, posted by Alexander Nozik on Mon Oct 28 11:21:19 2013  Hello, I am trying to move elog from old FreeBSD system to a new Ubuntu server and stuck with attachment encoding problem. The elog entries as well as attachments ашду тфьуы are mostly in koi8-r or cp1251 encoding. While it is relatively easy to configure log       Re: Attachment file names encoding, posted by Andreas Luedeke on Tue Oct 29 12:04:44 2013  [quote="Alexander Nozik"]Hello, I am trying to move elog from old FreeBSD system to a new Ubuntu server and stuck with attachment encoding problem. The elog entries as well as attachments ашду тфьуы are mostly in koi8-r or cp1251 encoding. While it is relatively easy to configure log          Re: Attachment file names encoding, posted by Alexander Nozik on Wed Oct 30 10:15:13 2013  Thank you for reply. I am not very experienced linux user so it could be a problem with the file system. Let me just describe what I do and what I see as a result.   Import of entries from DOOCS eLogBook to ELOG, posted by Andreas Luedeke on Thu Oct 24 12:09:29 2013  Hi everyone, we have formerly used the DOOCS eLogBook from DESY for a couple of years for some application at our large research facilities. Now we have standardized on ELOG and I've got a request to import the old DOOCS eLogBook   Importing XML/CSV, posted by Barend on Tue Oct 8 18:14:20 2013  Hi Stefan, I'm experiencing problems importing XML (.csv is not working at all for me). My logbook contains 3 date-attributes besides the system DATE (entry time), date-format is defined as %d %b %y.        Re: Importing XML/CSV, posted by Andreas Luedeke on Wed Oct 9 09:19:54 2013                            Barend wrote:                                           Hi Stefan,             I'm experiencing problems importing XML (.csv is not working at all for me).             My          Re: Importing XML/CSV, posted by Barend on Sun Oct 13 16:32:05 2013                            Andreas Luedeke wrote:                                                                      Re: Importing XML/CSV, posted by Andreas Luedeke on Wed Oct 16 16:53:55 2013                            Barend wrote:                                                                                                     Re: Importing XML/CSV, posted by Barend on Tue Oct 22 10:56:13 2013  Andreas Luedeke wrote:                              Error: Attribute <date> not supplied., posted by Barend on Mon Oct 14 12:08:16 2013  Stefan/Andreas, When I reply to an existing Logbook entry, I get the error page "Error: Attribute Audit Date not supplied. Please go back and enter the Audit Date field."       Re: Error: Attribute <date> not supplied., posted by David Pilgram on Tue Oct 15 14:14:07 2013                            Barend wrote:                                           Stefan/Andreas,          Re: Error: Attribute <date> not supplied., posted by Barend on Tue Oct 22 10:54:51 2013  David Pilgram wrote:                              automated email notification did not work for me, posted by Jianglai Liu on Mon Oct 11 10:27:26 2010  Hi, I am setting up an elog to organize my lab activities. I installed elog 2.8.0 on the latest CentOS 5.5, 32 bit. I got into trouble setting up the automated email notification.        Re: automated email notification did not work for me, posted by Stefan Ritt on Tue Nov 16 16:33:52 2010                            Jianglai Liu wrote:                                            Hi,          Re: automated email notification did not work for me, posted by Oliver Kirsebom on Thu Oct 17 14:23:06 2013                            Stefan Ritt wrote:                                                                      Re: automated email notification did not work for me, posted by Stefan Ritt on Thu Oct 17 14:27:56 2013                            Oliver Kirsebom wrote:                                                            Navigation previous and next button don't work, posted by Hung Dao on Thu Oct 10 21:03:09 2013  I am having a problem with the navigation buttons when clicking previous or next button.  It does not do anything.  Has anyone had this same problem?  I am also using IE 10.  But it seems also having a same problem on Firefox.       Re: Navigation previous and next button don't work, posted by Stefan Ritt on Fri Oct 11 09:44:42 2013                            Hung Dao wrote:                               I am having a problem with the navigation buttons when clicking previous or next button.  It does not do anything.  Has          Re: Navigation previous and next button don't work, posted by Mark Campbell on Fri Oct 11 10:18:04 2013                            Stefan Ritt wrote:                                                   Re: Navigation previous and next button don't work, posted by Stefan Ritt on Fri Oct 11 10:21:52 2013                            Mark Campbell wrote:                                                                         Re: Navigation previous and next button don't work, posted by David Pilgram on Fri Oct 11 11:19:00 2013                            Stefan Ritt wrote:                                                                                  Re: Navigation previous and next button don't work, posted by Hung Dao on Fri Oct 11 15:59:39 2013  Stefan Ritt wrote:                                        Re: Navigation previous and next button don't work, posted by Stefan Ritt on Fri Oct 11 16:18:05 2013                            Hung Dao wrote:                                                                         Re: Navigation previous and next button don't work, posted by Hung Dao on Fri Oct 11 19:20:22 2013  Stefan Ritt wrote:                              cannot add new logbooks to any of my logbook groups, posted by Paraic Fahey on Thu Oct 3 10:23:31 2013  Each time a attempt to CREATE A LOGBOOK on any of my logbook groups, I get an ELOG ERROR page presenting saying FORBIDDEN ATTRIBUTE DATE. I have, up until recently been able to add new logbooks. Can anybody help me on this.       Re: cannot add new logbooks to any of my logbook groups, posted by Stefan Ritt on Mon Oct 7 10:12:31 2013                            Paraic Fahey wrote:                                            Each time a attempt to CREATE A LOGBOOK on any of my logbook groups, I get an ELOG ERROR page presenting          Re: cannot add new logbooks to any of my logbook groups, posted by David Pilgram on Mon Oct 7 10:33:32 2013                            Stefan Ritt wrote:                                                                      Re: cannot add new logbooks to any of my logbook groups, posted by Paraic Fahey on Fri Oct 11 16:47:58 2013                            David Pilgram wrote:                                       Packaging ELOG for Debian, posted by Nicolas FRANCOIS on Fri Aug 30 13:27:56 2013  Hi. I'd like to package ELOG for the new Debian. I'm a complete beginner in       Re: Packaging ELOG for Debian, posted by Stefan Ritt on Tue Sep 24 17:38:33 2013                            Nicolas FRANCOIS wrote:                                            Hi.   Find by date/time, posted by Hal Proctor on Tue Sep 3 22:21:29 2013  Is it a time zone issue or a setting issue related to the FIND by date / time issue? It seems to add an hour to each of the time selections once you select SEARCH. see attached pics       Re: Find by date/time, posted by David Pilgram on Tue Sep 3 23:03:38 2013                            Hal Proctor wrote:                                            Is it a time zone issue or a setting issue related to the FIND by date / time issue?          Re: Find by date/time, posted by Hal Proctor on Wed Sep 11 17:12:52 2013  David Pilgram wrote:                                        Re: Find by date/time, posted by David Pilgram on Thu Sep 12 22:23:43 2013                            Hal Proctor wrote:                                                                           posting future logbook entries, posted by todd on Thu Sep 12 18:01:34 2013  Is there a way to post a logbook entry to a future dated logbook file?  I've searched through the user manual for forward dating but can't seem to find anything.  As an example at my office, a user wants to add a personal entry stating they will be absent from work on October 5th and I would like that entry information written to the 131005a.log file instead of the current days log.       Re: posting future logbook entries, posted by David Pilgram on Thu Sep 12 22:15:12 2013                            todd wrote:                                           Is there a way to post a logbook entry to a future dated logbook file?  I've searched through the user manual for forward dating but   How to remove "Remove user" button ?, posted by Mark Campbell on Wed Sep 4 11:48:55 2013  Is there a way to remove the "Remove user" button from non-Amin users config page?   BTW Stefan ELOG is a Great Solution!       Re: How to remove "Remove user" button ?, posted by Andreas Luedeke on Thu Sep 5 11:20:41 2013                            Mark Campbell wrote:                                            Is there a way to remove the "Remove user" button from non-Amin users config page?          Re: How to remove "Remove user" button ?, posted by Mark Campbell on Thu Sep 5 12:56:37 2013                            Andreas Luedeke wrote:                                     Query a log file, posted by Hal Proctor on Tue Sep 3 22:35:00 2013  Does anyone have a method to query the log file?  I wish to automate a summary report based on a defined timeframe (8hr shift) and deliver a report to the owners/managers of the logbook.  maybe even generate the summary report as an HTML entery within the logbook, encapsulating the enteries queried with the hyperlinks intact to the   Paragraph width size of log entries?, posted by Ryan Blakeslee on Tue Sep 3 00:34:59 2013  Hello, I've had much success and use with ELOG.  However there is one thing that I wish I could figure out in order to        Re: Paragraph width size of log entries?, posted by David Pilgram on Tue Sep 3 08:34:27 2013  > Hello, >  > I've had much success and use with ELOG.  However there is one thing that I wish I could figure out in order to    Moving password file, posted by UlfO on Fri Aug 16 11:54:17 2013  Hi,   Is it possible to move a passwordfile from one E-log to another E-Log located on a different server without the need for users to register again?       Re: Moving password file, posted by Stefan Ritt on Fri Aug 16 12:01:56 2013                            UlfO wrote:                                           Hi,   ELOG moved to GIT, posted by Stefan Ritt on Wed Jul 24 02:19:17 2013  The ELOG repository has been moved from Subversion to GIT. While the old repository will be visible for some time, all new development is done on the GIT repository. To download the repository, do a git clone https://bitbucket.org/ritt/elog.git   elog's image manipulation of .png file generated from a pdf/jpg, posted by David Pilgram on Thu Nov 22 16:23:08 2012  Hi all,  Is it just my system or do others have this odd issue.       Re: elog's image manipulation of .png file generated from a pdf/jpg, posted by Stefan Ritt on Wed Feb 6 13:25:33 2013  > Hi all,  >  > Is it just my system or do others have this odd issue.          Re: elog's image manipulation of .png file generated from a pdf/jpg, posted by David Pilgram on Sat Feb 9 15:11:19 2013  > > Hi all,  > >  > > Is it just my system or do others have this odd issue.             Re: elog's image manipulation of .png file generated from a pdf/jpg, posted by Stefan Ritt on Mon Feb 11 14:21:05 2013  > Well I didn't crash the server this time, and I could invert the image in the demo logbook by doing two rotations. > But, this is elog v2.9.0-2435, and I am using v2.9.2-2475.  And I remember there was a recent issue about the image manipulation at some point, so I went to the                Re: elog's image manipulation of .png file generated from a pdf/jpg, posted by Martin Rongen on Tue Jul 16 15:42:30 2013  > > Well I didn't crash the server this time, and I could invert the image in the demo logbook by doing two rotations. > > But, this is elog v2.9.0-2435, and I am using v2.9.2-2475.  And I remember there was a recent issue about the image manipulation at some point, so I went to the                   Re: elog's image manipulation of .png file generated from a pdf/jpg, posted by Stefan Ritt on Tue Jul 16 16:35:01 2013  > I can confirm this bug in V2.9.2. Also after submitting the entry, the orginal image is being displayed, with no rotation, resizing etc... Have you tried on the Demo logbook on the PSI server or on your installation. I just attached an image to this entry, rotated it twice, reduced its size                      Re: elog's image manipulation of .png file generated from a pdf/jpg, posted by Andreas Luedeke on Fri Jul 19 14:03:29 2013  > > I can confirm this bug in V2.9.2. Also after submitting the entry, the orginal image is being displayed, with no rotation, resizing etc... >  Have you tried on the Demo logbook on the PSI server or on your installation. I just attached an image to this entry, rotated it twice, reduced its size   and it works fine. The point is that I have to reproduce your bug in order to fix it, but it seems I cannot. > /Stefan   Hi                         Re: elog's image manipulation of .png file generated from a pdf/jpg, posted by Martin Rongen on Mon Jul 22 14:05:48 2013                            Andreas Luedeke wrote:                                            I would suggest that the reporters of the issue add a little bit of information, like the version of the operating   Auto save?, posted by Daniel Roldan on Fri Jun 28 10:43:03 2013   Hi,  One question, is possible activate auto-save while write a new "ticket"? Thanks very much.       Re: Auto save?, posted by Andreas Luedeke on Mon Jul 1 09:39:52 2013                            Daniel Roldan wrote:                                             Hi,           Re: Auto save?, posted by Stefan Ritt on Mon Jul 1 09:59:18 2013                            Andreas Luedeke wrote:                                                                      Re: update to ckeditor (formerly: Auto save?), posted by Andreas Luedeke on Mon Jul 1 13:30:28 2013                            Stefan Ritt wrote:                                                                           Enforce new thumbnails, posted by Martin Rongen on Mon Jun 24 15:46:43 2013  Hi everyone The past few days I have been editing elogd.c to link all image files to the PIXLR-API (http://pixlr.com/). I am now at a point where the edited images are uploaded fine to the elog server, but in order for the thumbnails  to refresh one needs to click edit and thus load the FCKeditor for the   Filter and sorting, posted by UlfO on Wed May 29 08:38:04 2013  Hi, We have a fire preventive team at our company doing periodic inspections of our       Re: Filter and sorting, posted by Stefan Ritt on Tue Jun 4 16:52:18 2013                            UlfO wrote:                                           Hi,          Re: Filter and sorting, posted by UlfO on Tue Jun 4 17:02:32 2013                            Stefan Ritt wrote:                                                   Re: Filter and sorting, posted by Stefan Ritt on Tue Jun 4 17:07:13 2013                            UlfO wrote:                                                                        Re: Filter and sorting, posted by UlfO on Tue Jun 4 17:16:32 2013                            Stefan Ritt wrote:                                         Latest windows version vs 2.9.2.2455, posted by UlfO on Tue Jun 4 17:07:04 2013    What is the differences between E-log windows version 2.9.2-2455 like we run and E-log windows version 2.9.2.-2475 ? I cant find a changelog for this.       Re: Latest windows version vs 2.9.2.2455, posted by Stefan Ritt on Tue Jun 4 17:09:44 2013                            UlfO wrote:                                                      Re: Latest windows version vs 2.9.2.2455, posted by UlfO on Tue Jun 4 17:14:25 2013                            Stefan Ritt wrote:                                         Sorting by numeric attribute (not entry ID)., posted by David Pilgram on Mon Jun 3 20:02:38 2013  By default, elog enties are sorted by their ID number.  When viewing a logbook in Full or Summary, they are shown in strict order of ID.  In Threaded, entries are shown in strict order of ID for the latest entry of each thread, and then previous entries (in reply to) back from the latest one.         Re: Sorting by numeric attribute (not entry ID)., posted by Stefan Ritt on Tue Jun 4 12:03:18 2013  > By default, elog enties are sorted by their ID number.  When viewing a logbook in Full or Summary, they are > shown in strict order of ID.  In Threaded, entries are shown in strict order of ID for the latest entry of each > thread, and then previous entries (in reply to) back from the latest one.            Re: Sorting by numeric attribute (not entry ID)., posted by David Pilgram on Tue Jun 4 15:00:23 2013  > > By default, elog enties are sorted by their ID number.  When viewing a logbook in Full or Summary, they are > > shown in strict order of ID.  In Threaded, entries are shown in strict order of ID for the latest entry of each > > thread, and then previous entries (in reply to) back from the latest one.     Daemonizing vs. shell execution, posted by Martin Rongen on Mon Jun 3 15:44:46 2013  Hi all I have setup an logbook that executes a number of shell scripts to preset attributes and append standart information, which works great. Now I am trying to daemonise the whole thing. I have tried the -D option as well as daemontools. In both cases the logbook itself is functional but the bash       Re: Daemonizing vs. shell execution, posted by Stefan Ritt on Mon Jun 3 15:53:22 2013                            Martin Rongen wrote:                                            Hi all          Re: Daemonizing vs. shell execution, posted by Martin Rongen on Tue Jun 4 13:26:02 2013                            Stefan Ritt wrote:                                                                           "full" only changes color, posted by Kees Bol on Mon Aug 1 11:58:43 2005  Hi, I have the strange problem that when changing to "full"-diplaymode the output looks the same as with "summary", only the color is different. The texts don't appear.       Re: "full" only changes color, posted by Stefan Ritt on Tue Aug 2 08:56:21 2005  [quote="Kees Bol"]I have the strange problem that when changing to "full"-diplaymode the output looks the same as with "summary", only the color is different. The texts don't appear. Any idea what can cause this behaviour?[/quote]          Re: "full" only changes color, posted by Kees Bol on Tue Aug 2 10:25:32 2005  [quote="Stefan Ritt"][quote="Kees Bol"]I have the strange problem that when changing to "full"-diplaymode the output looks the same as with "summary", only the color is different. The texts don't appear. Any idea what can cause this behaviour?[/quote]             Re: "full" only changes color, posted by Stefan Ritt on Thu Aug 4 22:35:57 2005  [quote="Kees Bol"]I thougt when choosing the full-view the text would appear along with the other attributes.[/quote] That's how it is supposed to be. I tried your config file, added three entries, and got the behaviour documented in the attached images. To me everything                Re: "full" only changes color, posted by Kees Bol on Fri Aug 5 10:00:00 2005  [quote="Stefan Ritt"][quote="Kees Bol"]I thougt when choosing the full-view the text would appear along with the other attributes.[/quote] That's how it is supposed to be. I tried your config file, added three entries, and got the behaviour documented in the attached images. To me everything                Re: "full" only changes color, posted by Kees Bol on Fri Aug 5 10:51:27 2005  [quote="Stefan Ritt"][quote="Kees Bol"]I thougt when choosing the full-view the text would appear along with the other attributes.[/quote] That's how it is supposed to be. I tried your config file, added three entries, and got the behaviour documented in the attached images. To me everything                   Re: "full" only changes color, posted by Stefan Ritt on Fri Aug 5 10:54:49 2005  [quote="Kees Bol"]Stefan, I installed V2.6.0-beta3 and there is a (unwanted) difference. The Text field now appears in the summary-view despite the config specifies:                      Re: "full" only changes color, posted by Kees Bol on Fri Aug 5 14:30:52 2005  [quote="Stefan Ritt"][quote="Kees Bol"]Stefan, I installed V2.6.0-beta3 and there is a (unwanted) difference. The Text field now appears in the summary-view despite the config specifies:       Re: "full" only changes color, posted by Martin Rongen on Mon Jun 3 15:49:33 2013  [quote="Kees Bol"]Hi, I have the strange problem that when changing to "full"-diplaymode the output looks the same as with "summary", only the color is different. The texts don't appear.   Application failed to initialize properly, posted by Norm on Sat May 18 17:41:51 2013  I attempted to install the newest version of elog on our site elog server from an old old version.  Around 2008 I believe.  I then received an application failed to initialize properly 0xc0150002 after installing the newest version.  I then tried installing the Feb 2013 version and received the same message.  Panicked, I rolled back our server to its state yesterday.  I would like to update our elog software, anyone know why I am       Re: Application failed to initialize properly, posted by Andreas Luedeke on Tue May 21 14:33:09 2013                            Norm wrote:                                           I attempted to install the newest version of elog on our site elog server from an old old version.  Around 2008 I believe.  I then          Re: Application failed to initialize properly, posted by Norm on Sat May 25 16:09:58 2013                            Andreas Luedeke wrote:                                                                                  Re: Application failed to initialize properly, posted by Norm on Sat Jun 1 20:20:03 2013                            Andreas Luedeke wrote:                                                                                     Re: Application failed to initialize properly, posted by Andreas Luedeke on Mon Jun 3 13:56:35 2013                            Norm wrote:                                                                                        hyperlink other elog posts, posted by Remington Tyler Thornton on Tue May 28 19:01:42 2013  I am on an experiment that used ELOG for all documentation and meeting notes. In our meeting notes we link to elog posts that had been discussed during the meeting. We had done this by hyperlinking the URL to the entry. Recently we had to move our logbook to another machine and so none of our hyperlinks work since the URLs have changed. I noticed that when one creates a new entry in the subject they can reference another post. Is there a way to link another       Re: hyperlink other elog posts, posted by Andreas Luedeke on Wed May 29 14:57:23 2013                            Remington Tyler Thornton wrote:                                            I am on an experiment that used ELOG for all documentation and meeting notes. In our meeting notes we   Elog command line problem, posted by Razvan Gornea on Tue May 28 09:16:18 2013  I'm trying to use the command line to post automatically entries from a web based calendar. I run elogd behind SSL with user/pass configuration. I created an account for the calendar and used the following command line. [gornea@lheppc63 ~]   Admin delete option, posted by Hal Proctor on Wed May 22 22:24:14 2013  How can I show the Delete option for Admins?  So I have a logbook with the following config:   some menu commands formed with broken links, posted by Ken Ludington on Tue May 7 22:15:37 2013  On many of my logbooks when I specify the menu commands to appear i will get one, usually 'List', which has a link not back to the logbook itself but to the root of the elog web server i.e. http:/hostname.domain:8080  But nothing will respond without the logbook name after the port number.  This also seems to be happening to the       Re: some menu commands formed with broken links, posted by Garret Delaronde on Fri May 10 17:24:55 2013  > On many of my logbooks when I specify the menu commands to appear i will get one, usually 'List', which has a > link not back to the logbook itself but to the root of the elog web server i.e. http:/hostname.domain:8080  > But nothing will respond without the logbook name after the port number.  This also seems to be happening to the          Re: some menu commands formed with broken links, posted by Ken Ludington on Fri May 10 19:26:50 2013  Here's the global section and the logbook section for one of the logbooks affected.  Of note, the 'demo' logbook works fine and does not have this issue.             Re: some menu commands formed with broken links, posted by Stefan Ritt on Fri May 17 15:26:50 2013  > Top group 2012 =  2011, 2010, 2009, 2008, 2007, WINTER Your usage of "Top group" is strange. Top groups should only be used for independent groups of logbooks, more like you were running one dedicated sever   Kerberos on Windows server, posted by Hal Proctor on Mon May 13 16:44:05 2013   Does anyone have a success story with kerberos on windows?       Re: Kerberos on Windows server, posted by Hal Proctor on Thu May 16 16:29:16 2013                            Hal Proctor wrote:                                         Multi Language based on logged on user?, posted by Hal Proctor on Thu May 16 15:41:34 2013  Can ELog support different languages based on the logged on user?   Auto-Generate new logbook daily, posted by Ryan Blakeslee on Fri Apr 26 22:29:50 2013  Hello, I am currently using ELOG as a daily logbook for work performed for customers.  This is a critical tool  and process for 1. Showing customers work history 2. having a searchable knowledge base for future reference.          Re: Auto-Generate new logbook daily, posted by Stefan Ritt on Sat Apr 27 11:53:41 2013                            Ryan Blakeslee wrote:                                            Hello,          Re: Auto-Generate new logbook daily, posted by David Pilgram on Sat Apr 27 13:21:38 2013                            Stefan Ritt wrote:                                                                      Re: Auto-Generate new logbook daily, posted by Stefan Ritt on Sat Apr 27 15:30:28 2013                            David Pilgram wrote:                                            Mind you, my log files have the format yymmdda.log, whereas you state yours are mmddyya.log, which strikes             Re: Auto-Generate new logbook daily, posted by Andreas Luedeke on Mon Apr 29 10:17:54 2013                            David Pilgram wrote:                                                                                        Re: Auto-Generate new logbook daily, posted by Ryan Blakeslee on Tue May 7 04:57:37 2013                            Andreas  Luedeke wrote:                                                                            Re: Auto-Generate new logbook daily, posted by David Pilgram on Tue May 7 11:54:23 2013                            Ryan Blakeslee wrote:                                                                                              Re: Auto-Generate new logbook daily, posted by Andreas Luedeke on Mon May 13 22:31:37 2013                            David Pilgram wrote:                                                admin user access admin page, not config page, posted by Szu-Ching Peckner on Tue Sep 18 17:57:47 2012   We have multiple logbooks. Each user is admin user for his/her own logbook.  I want user be able to modify config file, but no access to user setting, such as see user list, change password, new user, remove user.        Re: admin user access admin page, not config page, posted by Garret Delaronde on Fri May 10 17:37:24 2013                            Szu-Ching Peckner wrote:                                             We have multiple logbooks. Each user is admin user for his/her own logbook.    Blockying user access, posted by Gian Henriques on Fri Apr 26 18:39:11 2013   How can I block access to some tools (like edit, erase, config...) for each user? I want only admin users can edit, erase , etc.    I want know too, how can I erase configuration of SMTP?  I make a test with the "elogd -t" command and now every time I create a       Re: Blockying user access, posted by Garret Delaronde on Fri Apr 26 19:48:01 2013                            Gian Henriques wrote:                                             How can I block access to some tools (like edit, erase, config...) for each user? I want only          Re: Blockying user access, posted by Gian Henriques on Wed May 8 19:17:09 2013                            Garret Delaronde wrote:                                                                      Re: Blockying user access, posted by Gian Henriques on Wed May 8 23:15:34 2013                            Gian Henriques wrote:                                                                         Re: Blockying user access, posted by Garret Delaronde on Fri May 10 17:21:50 2013                            Gian Henriques wrote:                                                            Kerberos on VM server 64bit, posted by Hal Proctor on Thu May 2 21:10:23 2013   I have a logbook installed on a Windows 64 bit VM server 2008 R2 and can access it fine using the password file.  However when using Kerberos it does not authenticate correctly.  I installed Kerberos and pointed it to the realm an domain controller.  Using KINIT command line it appears to accept my password.  Any help is appriciated.  Perhaps some other diagnostics i could try against the kerberos install       Re: Kerberos on VM server 64bit, posted by Stefan Ritt on Fri May 3 14:41:01 2013                            Hal Proctor wrote:                                             I have a logbook installed on a Windows 64 bit VM server 2008 R2 and can access it fine using          Re: Kerberos on VM server 64bit, posted by Hal Proctor on Fri May 3 19:09:45 2013                            Stefan Ritt wrote:                                                                      Re: Kerberos on VM server 64bit, posted by Hal Proctor on Fri May 3 19:27:53 2013                            Hal Proctor wrote:                                                            Support for modern Linux, posted by Vinícius Ferrão on Wed Nov 7 12:56:12 2012  Hello folks, Can we have a better support under modern Linux distributions? I'm trying to install elog in our webserver and it's becoming a boring task. First of all theres only RPM packages. And we really don't like the       Re: Support for modern Linux, posted by Stefan Ritt on Wed Nov 7 13:14:15 2012                            Vinícius Ferrão wrote:                                            Hello folks,       Re: Support for modern Linux, posted by Graham Medlin on Wed Nov 7 13:45:10 2012  I'm not of the skill level to help, but for what its worth, running Ubuntu 12.04, used alien to install the latest RPM with only two little snags. I had to create a link from libssl.so.1.0.0 to libssl.so.6, which is a trick I've pulled with other software, not sure what the proper fix is. I also had to make similar changes to the init script.       Re: Support for modern Linux, posted by Louis de Leseleuc on Wed Nov 7 20:48:03 2012                            Vinícius Ferrão wrote:                                            Hello folks,          Re: Support for modern Linux, posted by David Pilgram on Wed Nov 7 22:29:11 2012                            Louis de Leseleuc wrote:                                                                               Re: Support for modern Linux, posted by Achim Dreyer on Sat Apr 27 14:09:13 2013  Vinícius Ferrão wrote: Hello folks, Can we have a better support under modern Linux distributions?   Auto-Generate new logbook daily, posted by Ryan Blakeslee on Fri Apr 26 22:29:50 2013  Hello, I am currently using ELOG as a daily logbook for work performed for customers.  This is a critical tool  and process for 1. Showing customers work history 2. having a searchable knowledge base for future reference.      Exim4, posted by Matthew D. on Tue Apr 23 22:14:42 2013   Hi, My email configuration is a little complicated as all emails must be relayed to a central server with TLS authentication.  So far I've been unable to get the ELOG to work with email, after numerous attempts .  I have got exim4 working on this machine but I don't       Re: Exim4, posted by Stefan Ritt on Wed Apr 24 11:00:41 2013                            Matthew D. wrote:                                             Hi,   Checking logging before posting, posted by Daniel Campora on Thu Apr 4 17:47:12 2013  Hi there,   Here's a bit of a special scenario. There's no server-side check the user is logged in upon posting, but it rather seems the server relies on the       Re: Checking logging before posting, posted by Stefan Ritt on Fri Apr 5 10:07:57 2013                            Daniel Campora wrote:                                            Hi there,   Calculate with dates, posted by UlfO on Wed Mar 27 10:30:01 2013  Hi, Is it possbile to compare dates in E-log?       Re: Calculate with dates, posted by Stefan Ritt on Wed Apr 3 15:09:09 2013                            UlfO wrote:                                           Hi,          Re: Calculate with dates, posted by David Pilgram on Wed Apr 3 19:08:22 2013                            Stefan Ritt wrote:                                                                                  Re: Calculate with dates, posted by UlfO on Thu Apr 4 17:54:23 2013                            Stefan Ritt wrote:                                         Incomplete SSL proxy instructions, insecure result., posted by Konstantin Olchanski on Fri Mar 22 19:41:31 2013  The instructions for securing elogd using an SSL proxy are incomplete. http://midas.psi.ch/elog/adminguide.html#secure http://midas.psi.ch/elogs/contributions/11       Re: Incomplete SSL proxy instructions, insecure result., posted by Stefan Ritt on Wed Apr 3 17:11:06 2013  > The instructions for securing elogd using an SSL proxy are incomplete. > http://midas.psi.ch/elog/adminguide.html#secure > http://midas.psi.ch/elogs/contributions/11   Wrong link in "Your ELOG account has been activated" email, posted by Ron Beekman on Wed Mar 6 17:56:22 2013  After entering a new user and activating it in ELOG, the new user receives an email. The link does not work because the port number is repeated in the link (see below)       Re: Wrong link in "Your ELOG account has been activated" email, posted by Stefan Ritt on Thu Mar 7 14:13:08 2013  > After entering a new user and activating it in ELOG, the new user receives an email. > The link does not work because the port number is repeated in the link (see below) > In the Global part of the elogd.ini we have added the port:          Re: Wrong link in "Your ELOG account has been activated" email, posted by Ron Beekman on Thu Mar 7 14:37:27 2013  Hi Stefan, thank you very much for having a look at this :-)   Fixed Attributes on first reply, posted by Tobias Meyer on Thu Mar 7 12:50:51 2013   Hi i am new here,   is there a way to use a Parameter like this "Fixed Attributes on first reply"?       Re: Fixed Attributes on first reply, posted by Stefan Ritt on Thu Mar 7 12:52:12 2013                            Tobias Meyer wrote:                                             Hi i am new here,          Re: Fixed Attributes on first reply, posted by Tobias Meyer on Thu Mar 7 13:35:52 2013                            Stefan Ritt wrote:                                                            elogd crashes with malloc() memory corruption, posted by Mark Bergman on Fri Mar 1 16:35:21 2013   I'm having an issue with ELog 2.9.2 revision 2455 where it crashes consistently with: *** glibc detected *** /usr/local/sbin/elogd: malloc(): memory corruption: 0x0000000014977210 *** (the address varies). The crash seems to be triggered by the attempt to email a log entry. The log entry itself is saved. If I open the existing   Search result background color, posted by Francois Cukier on Mon Feb 25 19:12:47 2013   Is it possible to change the "yellow" background color when running a search ? (I looked in the css, there is nothing...)  Couldn't find any syntax for elogd.cfg Thanks for your help :)       Re: Search result background color, posted by Stefan Ritt on Tue Feb 26 08:24:45 2013                            Francois Cukier wrote:                                             Is it possible to change the "yellow" background color when running a search ? (I looked          Re: Search result background color, posted by Francois Cukier on Wed Feb 27 14:44:48 2013                            Stefan Ritt wrote:                                                            Custom "move to", posted by Francois Cukier on Wed Feb 27 13:43:00 2013   Good day, I have 2 logbooks. The main one and the one for the archived entries. I can make a "move to" command in the main one witch will bring the drop down for the archive. (working perfect).   Edit from summary view, posted by Francois Cukier on Mon Feb 25 19:10:07 2013   Good day,   I was wondering (and I searched for :) ) a way to directly edit an entry while in summary view instead of having to first click on the entry then       Re: Edit from summary view, posted by Stefan Ritt on Tue Feb 26 08:25:14 2013                            Francois Cukier wrote:                                             Good day,   Multiple versions of elog on one server, posted by Chris Smith on Wed Feb 20 21:13:28 2013  Is there a way of having multiple copies of elog running on one windows 2003 server? different ports? I need to access 2 different elogd.cfg files.       Re: Multiple versions of elog on one server, posted by David Pilgram on Wed Feb 20 21:52:06 2013                            Chris Smith wrote:                                            Is there a way of having multiple copies of elog running on one windows 2003 server? different ports?          Re: Multiple versions of elog on one server, posted by Chris Smith on Wed Feb 20 23:41:00 2013                            David Pilgram wrote:                                                 Re: Multiple versions of elog on one server, posted by Stefan Ritt on Thu Feb 21 08:12:01 2013                            Chris Smith wrote:                                                                         Re: Multiple versions of elog on one server, posted by Chris Smith on Thu Feb 21 20:05:44 2013                            Stefan Ritt wrote:                                                         Re: Multiple versions of elog on one server, posted by Stefan Ritt on Fri Feb 22 11:40:34 2013                            Chris Smith wrote:                                                                   Re: Multiple versions of elog on one server, posted by Andreas Luedeke on Thu Feb 21 13:41:25 2013                            David Pilgram wrote:                                                                           any way to undelete entries?, posted by Mark Bergman on Thu Feb 21 23:23:19 2013   Is there any way within eLog to undelete entries?       Re: any way to undelete entries?, posted by Stefan Ritt on Fri Feb 22 08:19:27 2013                            Mark Bergman wrote:                                             Is there any way within eLog to undelete entries?       Re: any way to undelete entries?, posted by Andreas Luedeke on Fri Feb 22 10:58:18 2013                            Mark Bergman wrote:                                             Is there any way within eLog to undelete entries?   Sort Attribute = 0, posted by Garret Delaronde on Thu Feb 21 20:24:23 2013  Hello All, The subject is roughly what i'm asking about so here are the details. I have combed through the forums for an answer and didn't come up with anything regarding what i need.       Re: Sort Attribute = 0, posted by Garret Delaronde on Thu Feb 21 20:32:54 2013                            Garret Delaronde wrote:                                            Hello All,   FCKEditor doesn't show up in Windows 8?, posted by John Haggerty on Wed Feb 20 02:45:45 2013  After installing ELOG on a new Windows 8 machine, I found everything working fine... until I went to make a new entry.   New entries work... but the FCKEditor toolbars do not show up.  I tried a variety of things (start as a service, start not as a service, run as administrator), but nothing made the toolbar appear that I coumd find.  The ELCode editor toolbar appears, but the nifty FCKEditor toobar never appears.  I could not figure       Re: FCKEditor doesn't show up in Windows 8?, posted by Stefan Ritt on Wed Feb 20 09:32:52 2013                            John Haggerty wrote:                                            After installing ELOG on a new Windows 8 machine, I found everything working fine... until I went to          Re: FCKEditor doesn't show up in Windows 8?, posted by John Haggerty on Thu Feb 21 02:01:59 2013                            Stefan Ritt wrote:                                                            Protect Selection page=1, posted by Ocane on Wed Jun 20 14:02:45 2012   Hi, I have several top groups and each has several logbooks. If I use the global option Protect Selection page=1 and Show top       Re: Protect Selection page=1, posted by Tom Langford on Mon Feb 18 20:12:25 2013                            Ocane wrote:                                                      Re: Protect Selection page=1, posted by Stefan Ritt on Tue Feb 19 09:13:34 2013                            Tom Langford wrote:                                                                Re: Protect Selection page=1, posted by Stefan Ritt on Tue Feb 19 09:14:22 2013                            Ocane wrote:                                               Locking a Thread, posted by Hal Proctor on Wed Feb 13 15:39:07 2013  How can I set up the admins or manager group with the ability to Lock a Thread?  I don't wish to keep two log books.       Re: Locking a Thread, posted by Stefan Ritt on Wed Feb 13 16:27:18 2013                            Hal Proctor wrote:                                            How can I set up the admins or manager group with the ability to Lock a Thread?  I don't wish to          Re: Locking a Thread, posted by Hal Proctor on Wed Feb 13 16:56:40 2013                            Stefan Ritt wrote:                                                   Re: Locking a Thread, posted by Stefan Ritt on Wed Feb 13 16:59:06 2013                            Hal Proctor wrote:                                                            Re-using IDs after move to another Logbook overwrite Entries, posted by Barend on Wed Jan 2 15:38:19 2013  Hi Stefan, I have observed following behavior when I move entries from one logbook to another:     The first entry in "Open" get ID "1"     When I move this Item to "Closed", it will keep ID       Re: Re-using IDs after move to another Logbook overwrite Entries, posted by David Pilgram on Thu Jan 10 22:07:10 2013                            Barend wrote:                                           Hi Stefan,          Re: Re-using IDs after move to another Logbook overwrite Entries, posted by Stefan Ritt on Fri Jan 11 08:17:37 2013                            David Pilgram wrote:                                                                      Re: Re-using IDs after move to another Logbook overwrite Entries, posted by Barend on Thu Jan 24 10:42:13 2013                            Stefan Ritt wrote:                                                      Re: Re-using IDs after move to another Logbook overwrite Entries, posted by Stefan Ritt on Wed Feb 6 13:22:53 2013                            Barend wrote:                                           I have tried to use the "Ticket ID" approach and with each new entry this Ticket ID is indeed increased automatically...                   Re: Re-using IDs after move to another Logbook overwrite Entries, posted by David Pilgram on Wed Feb 6 18:18:24 2013                            Stefan Ritt wrote:                                                                           Dual Time display and entry times, posted by Bruce Weber on Mon Jan 14 03:05:41 2013  ELog has been installed on our local server which runs on local time (UTC +8) and is working well, however, we work in two time zones. Our PC's run in local time (IT requirement) but need to save and display one log in UTC and one log in local time - can this be done? Appreciate anyones help!       Re: Dual Time display and entry times, posted by Yoshio Imai on Mon Jan 14 13:33:19 2013  Depending on whether I understand your requirement correctly, the following solution should work: [LIST] [*] define an additional logbook attribute, say "UTC Date"   Main Logbook screen with Multi Grouped Logbooks with unique user permissions, posted by Hal Proctor on Tue Dec 18 23:03:57 2012  I have a couple questions on how to configure multiple logbooks with groups.     How can I have a user have permissions to a single logbook that is within a group and jump to it using tabs?              Launching from main/home screen may work, but using tabs from one group to another where the single workbook resides in a group of others, it errors out or asks       Re: Main Logbook screen with Multi Grouped Logbooks with unique user permissions, posted by Stefan Ritt on Thu Jan 10 10:52:11 2013                            Hal Proctor wrote:                                            I have a couple questions on how to configure multiple logbooks with groups.   trouble ticket systems w/ elog?, posted by Miles Fidelman on Mon Jan 7 01:45:10 2013  Updating my toolbox.  Starting to use elog as, well, a logbook.  Kind of liking the short, sweet, to the point capabilities. Which leads me to wonder if anybody has opinions on trouble ticket systems that work well with elog? Thanks!       Re: trouble ticket systems w/ elog?, posted by David Pilgram on Wed Jan 9 11:19:50 2013                            Miles Fidelman wrote:                                            Updating my toolbox.  Starting to use elog as, well, a logbook.  Kind of liking the short, sweet, to the          Re: trouble ticket systems w/ elog?, posted by Miles Fidelman on Wed Jan 9 18:20:41 2013                            David Pilgram wrote:                                                                                     Re: trouble ticket systems w/ elog?, posted by David Pilgram on Wed Jan 9 21:07:53 2013                            Miles Fidelman wrote:                                                                         Re: trouble ticket systems w/ elog?, posted by Miles Fidelman on Wed Jan 9 22:28:20 2013                            David Pilgram wrote:                                                                           hyperlink to file, posted by Diego on Tue Jan 8 20:02:04 2013   Hi, I would like to make an hyperlink to an external file in a messaje. I have writen Allow (HTML = 1) in .cfg file and the hyperlink as <p><a href="file:\\external_computer\directory">test</a></p>       Re: hyperlink to file, posted by Stefan Ritt on Wed Jan 9 10:12:14 2013                            Diego wrote:                                            Hi,   number of attachments limit, posted by Devin Bougie on Thu Dec 20 17:08:51 2012  Hello, Is there still a limit of 50 attachments per topic?  If so, is there or could there be a parameter to change this setting? Thanks,       Re: number of attachments limit, posted by Stefan Ritt on Mon Jan 7 16:46:54 2013                            Devin Bougie wrote:                                            Hello,   How to put "Quote text" _below_ new message?, posted by Valentin on Thu Dec 27 01:33:11 2012  Hi there, It seems that by default in a message created as "reply" of another message, the "quoted text" of the original entry is put at the _TOP_ of the new entry and not movable (Firefox 17, elog 2.92). I would strongly like to have it opposite, i.e. that one is able to create a new       Re: How to put "Quote text" _below_ new message?, posted by David Pilgram on Thu Dec 27 12:52:00 2012                            Valentin wrote:                                            Hi there,          Re: How to put "Quote text" _below_ new message?, posted by Stefan Ritt on Mon Jan 7 16:43:27 2013  If you use HTML encoding, you can do that with Prepend on reply = <br /> to achieve the same thing (as I did just here in this reply).   SMTP Error: authentication not enabled, posted by Satish Desai on Fri Jan 4 00:28:09 2013  Hi all, I am trying to set up elog here at the University of Minnesota.  It looks very promising for helping to manage a fairly complicated operation.  I've got most of what I want set up without too much difficulty.  However, I find that I'm having some difficulty to get it working properly with       Re: SMTP Error: authentication not enabled, posted by Stefan Ritt on Mon Jan 7 16:39:31 2013                            Satish Desai wrote:                                            Hi all,   Hide/Un-hide Commands based on Attribute Option value, posted by Barend on Wed Jan 2 14:04:41 2013  Hi Stefan, Happy New Year! I ran several searches thru the forum but I could not detect a suitable entry on the following:   Reply HTML, posted by Hal Proctor on Wed Dec 12 22:25:07 2012  Any reason why when I click "Reply" to a previous submission that the body is full of HTML code? See below: <p>       Re: Reply HTML, posted by Stefan Ritt on Mon Dec 17 13:34:40 2012                            Hal Proctor wrote:                                            Any reason why when I click "Reply" to a previous submission that the body is full          Re: Reply HTML, posted by Hal Proctor on Mon Dec 17 14:38:48 2012                            Stefan Ritt wrote:                                                   Re: Reply HTML, posted by Hal Proctor on Mon Dec 17 14:51:10 2012                            Hal Proctor wrote:                                                      Re: Reply HTML, posted by Hal Proctor on Mon Dec 17 21:49:54 2012                            Hal Proctor wrote:                                                         Re: Reply HTML, posted by Andreas Luedeke on Tue Dec 18 12:09:38 2012                            Hal Proctor wrote:                                                            error: "HTML encoding not allowed" , posted by julia on Sat Dec 15 22:37:27 2012  Hi all, I'm absolutely new with ELOG and have only basic programming skills... I'd like to use ELOG, so I have installed it in my computer to start playing with it (I installed version 2.7.0-1953 because with the latest one       Re: error: "HTML encoding not allowed" , posted by Stefan Ritt on Mon Dec 17 09:18:51 2012                            julia wrote:                                           Hi all,   Error 554 MailTransferAgentServer ESMTP not accepting messages, posted by Ron Beekman on Mon Dec 10 16:28:27 2012  Hello, We use ELOG for many years and enjoy it's functions every day! Lately, we see errors whenever we add an entry in elog: 554 MailTransferAgentServer ESMTP not accepting messages       Re: Error 554 MailTransferAgentServer ESMTP not accepting messages, posted by Andreas Luedeke on Tue Dec 11 09:00:36 2012  Just my 2 cent: did you try to reproduce the problem with the latest ELOG version 2.9.2? Kind Regards          Re: Error 554 MailTransferAgentServer ESMTP not accepting messages, posted by Ron Beekman on Tue Dec 11 09:43:33 2012  > Just my 2 cent: did you try to reproduce the problem with the latest ELOG version 2.9.2? Hi Andreas,       Re: Error 554 MailTransferAgentServer ESMTP not accepting messages, posted by Stefan Ritt on Tue Dec 11 09:45:25 2012                            Ron Beekman wrote:                                            Hello,          Re: Error 554 MailTransferAgentServer ESMTP not accepting messages, posted by Ron Beekman on Tue Dec 11 10:17:11 2012                            Stefan Ritt wrote:                                         Default filtered view, posted by UlfO on Fri Nov 30 09:08:52 2012  Hi, Is it possible to have a default filtered view in E-log? Lets say we have a record with status finished on one attribute.       Re: Default filtered view, posted by Stefan Ritt on Fri Nov 30 13:19:37 2012                            UlfO wrote:                                           Hi,          Re: Default filtered view, posted by UlfO on Fri Nov 30 13:26:27 2012                            Stefan Ritt wrote:                                                   Re: Default filtered view, posted by Stefan Ritt on Fri Nov 30 13:33:42 2012                            UlfO wrote:                                                                        Re: Default filtered view, posted by UlfO on Fri Nov 30 13:44:06 2012                            Stefan Ritt wrote:                                         ELOG crash related to Kerberos, SSL and Login users, posted by Andreas Luedeke on Mon Nov 26 15:57:49 2012  I'm using Kerberos and SSL and experience problems with individual setting of "Login user =" for different logbooks. Sometimes (not every time, but most times) the server crashes under the following condition: When I login at one logbook and then change to a logbook, that has a restricted "Login user" list with my login       Re: ELOG crash related to Kerberos, SSL and Login users, posted by Andreas Luedeke on Mon Nov 26 17:12:32 2012  Forget the previous post: I cannot reproduce the problem with the latest version of elogd (2.9.2-2475).   Need for email address in login?, posted by Jeff Kozloski on Mon Nov 19 20:28:11 2012  How can I skip the need for an email address when registering and logging in? Our IT dept will not give an email address to each guy I want on the log.       Re: Need for email address in login?, posted by Stefan Ritt on Tue Nov 20 08:45:59 2012                            Jeff Kozloski wrote:                                            How can I skip the need for an email address when registering and logging in? Our IT dept will not give          Re: Need for email address in login?, posted by David Pilgram on Tue Nov 20 10:28:24 2012                            Stefan Ritt wrote:                                                                                  Re: Need for email address in login?, posted by Jeff Kozloski on Tue Nov 20 19:31:06 2012                            Stefan Ritt wrote:                                                                           Password setup, posted by Jeff Kozloski on Mon Nov 19 20:05:46 2012  Looking at some of the questions here this seems too newbie to even ask. I want to set up a log book for my mechanics. I want them to each have a password to log in and enter what they do each day. When I try to set up a password file it takes all the info, then when I hit save it says "server has been reset" and it will not log       Re: Password setup, posted by Jeff Kozloski on Mon Nov 19 20:18:28 2012                            Jeff Kozloski wrote:                                            Looking at some of the questions here this seems too newbie to even ask.   Elogd hangs while uploading bmp attachment, posted by David Wallis on Tue Oct 30 22:47:15 2012  I'm running elog 2.9.2 on a Red Hat 6.3 server. This installation has been running for some time on a Solaris server, and was recently moved to the RHEL server. When a user tries to upload a .bmp attachment, the upload never completes, eventually timing out with a proxy error. At that point, the elogd process       Re: Elogd hangs while uploading bmp attachment, posted by David Pilgram on Wed Oct 31 12:14:41 2012                            David Wallis wrote:                                            I'm running elog 2.9.2 on a Red Hat 6.3 server. This installation has been running for some time on a Solaris server,          Re: Elogd hangs while uploading bmp attachment, posted by David Wallis on Wed Oct 31 16:08:40 2012                            David Pilgram wrote:                                                                      Re: Elogd hangs while uploading bmp attachment, posted by David Pilgram on Wed Oct 31 16:22:57 2012                            David Wallis wrote:                                                                                        Re: Elogd hangs while uploading bmp attachment, posted by David Wallis on Wed Oct 31 18:04:47 2012                            David Pilgram wrote:                                                                            Re: Elogd hangs while uploading bmp attachment, posted by David Pilgram on Wed Oct 31 18:26:49 2012                            David Wallis wrote:                                                                               Re: Elogd hangs while uploading bmp attachment, posted by Andreas Luedeke on Wed Oct 31 17:20:14 2012                            David Wallis wrote:                                            I'm running elog 2.9.2 on a Red Hat 6.3 server. This installation has been running for some time on a Solaris server,          Re: Elogd hangs while uploading bmp attachment, posted by David Wallis on Wed Oct 31 18:51:31 2012                            Andreas Luedeke wrote:                                                            Comment avoir elog en français II, posted by Philippe Rousselot on Sat Oct 27 18:15:37 2012  Bonjour, tout est dans le titre.  Merci       Re: Comment avoir elog en français II, posted by Andreas Luedeke on Mon Oct 29 07:52:07 2012                            Philippe Rousselot wrote:                                            Bonjour,          Re: Comment avoir elog en français II, posted by Philippe Rousselot on Mon Oct 29 09:13:54 2012                            Andreas Luedeke wrote:                                                                                     Re: Comment avoir elog en français II [solved almost], posted by Philippe Rousselot on Mon Oct 29 09:20:50 2012                            Philippe Rousselot wrote:                                                                                        Re: Comment avoir elog en français II [solved almost], posted by David Pilgram on Mon Oct 29 12:22:30 2012                            Philippe Rousselot wrote:                                                                                           Re: Comment avoir elog en français II [solved almost], posted by Andreas Luedeke on Mon Oct 29 17:27:12 2012                            David Pilgram wrote:                                                                                              Re: Comment avoir elog en français II [solved almost], posted by David Pilgram on Mon Oct 29 19:10:37 2012                            Andreas Luedeke wrote:                                                                           Comment avoir elog en français, posted by Philippe Rousselot on Sat Oct 27 18:10:14 2012      Protect Selection, posted by John Becker on Mon Oct 15 16:10:52 2012   Hi, I have a question regarding the Protect Selection option. I have the option enabled and I have to login to get into the logbook. What I would like to accomplish is that the page does not display anything (none of the posts) when it is opened. The only option should be to login. Is this possible?   Importing XML, posted by David Chastain on Tue Oct 2 21:58:20 2012  I was wondering if anyone out there has had any success with importing XML data into ELOG. Using the XML schema which I derive from the EXPORT data from ELOG into XML format or creating the file from scratch, I either blowup the system and have to restart elogd or it doesn't work and says, XML file doesn't contain ELOG_LIST element (which I create and it still doesn't work).       Re: Importing XML, posted by Stefan Ritt on Wed Oct 3 14:05:15 2012                            David Chastain wrote:                                            I was wondering if anyone out there has had any success with importing XML data into ELOG. Using the       Re: Importing XML, posted by Andreas Luedeke on Thu Oct 4 11:35:12 2012                            David Chastain wrote:                                            [...] Basically, I am trying to take spreadsheet data, convert it into XML and upload it as   Formating input fields with size and width, posted by UlfO on Wed Oct 3 14:22:29 2012  Hi,   Why is the color of an inputfield changing when I have changed the size and width?       Re: Formating input fields with size and width, posted by Stefan Ritt on Wed Oct 3 14:23:55 2012                            UlfO wrote:                                           Hi,          Re: Formating input fields with size and width, posted by UlfO on Wed Oct 3 14:28:20 2012                            Stefan Ritt wrote:                                                   Re: Formating input fields with size and width, posted by Stefan Ritt on Wed Oct 3 14:34:58 2012                            UlfO wrote:                                                                        Re: Formating input fields with size and width, posted by UlfO on Wed Oct 3 14:46:44 2012                            Stefan Ritt wrote:                                         Disable Preview button, posted by UlfO on Thu Sep 27 10:51:25 2012  Hi, Is it possible to disable the Previewbutton?         Re: Disable Preview button, posted by Stefan Ritt on Thu Sep 27 11:04:09 2012                            UlfO wrote:                                           Hi,          Re: Disable Preview button, posted by UlfO on Thu Sep 27 11:22:36 2012                            Stefan Ritt wrote:                                                   Re: Disable Preview button, posted by Stefan Ritt on Thu Sep 27 11:26:36 2012                            UlfO wrote:                                                                        Re: Disable Preview button, posted by UlfO on Thu Sep 27 12:26:09 2012                            Stefan Ritt wrote:                                         Mysterious Emboldened lines in threaded (collapsed) mode, posted by David Pilgram on Mon Sep 17 13:42:50 2012  I upgraded my system, including the version of Firefox. I normally view the topic in Threaded Collapsed mode, right click on the entry I want to reply to, to open a new       Re: Mysterious Emboldened lines in threaded (collapsed) mode, posted by Andreas Luedeke on Tue Sep 18 10:05:27 2012  > I upgraded my system, including the version of Firefox. > [...] > Sorry this is a bit rambling, but its very hard to describe!          Re: Mysterious Emboldened lines in threaded (collapsed) mode, posted by David Pilgram on Tue Sep 18 18:41:05 2012  > > I upgraded my system, including the version of Firefox. > > [...] > > Sorry this is a bit rambling, but its very hard to describe!   HTML editor, posted by Josef Uher on Sun Sep 16 18:40:06 2012   Hi All,   maybe I missed something in the configuration, but how do I get this nice editor for HTML like the one available on this forum? Thanks a lot for advice.       Re: HTML editor, posted by Andreas Luedeke on Mon Sep 17 09:16:38 2012                            Josef Uher wrote:                                             [...] maybe I missed something in the configuration, but how do I get this nice editor for HTML          Re: HTML editor, posted by Josef Uher on Mon Sep 17 15:14:46 2012                            Andreas Luedeke wrote:                                                            Crash with long image names, posted by Josef Uher on Sun Sep 16 21:14:12 2012  Hi All, I found that elog crashes if I try to upload an image with long name. It actually uploads the file after the crash. It crashes also if in the full view with attachments visible. If I shorten the name all is fine.   ELOG crashes when editing threads, posted by Louis de Leseleuc on Fri Sep 14 17:59:44 2012   Hi, I am experiencing repeated crashing of the elog daemon. If I go into select mode while in threaded view, I can select an entire thread by selecting the top entry.   Type <attribute> = Date - Issue, posted by Garret Delaronde on Fri Sep 7 18:19:38 2012   I haven't found anything in the forums about this. Apologies if its a duplicate. I am fairly familiar with ELog, use it for multiple purposes on 5 different Virtual Servers at work.  Currently looking to do some updates to one of the instances with the Date Type setting.       Re: Type <attribute> = Date - Issue, posted by David Pilgram on Fri Sep 7 19:08:27 2012                            Garret Delaronde wrote:                                             I haven't found anything in the forums about this. Apologies if its a duplicate.          Re: Type <attribute> = Date - Issue, posted by Garret Delaronde on Mon Sep 10 17:18:03 2012                            David Pilgram wrote:                                                                Re: Type <attribute> = Date - Issue, posted by Andreas Luedeke on Wed Sep 12 10:50:40 2012                            Garret Delaronde wrote:                                             I haven't found anything in the forums about this. Apologies if its a duplicate.   secure way to allow users create logbook, posted by Szu-Ching Peckner on Tue Aug 28 23:02:07 2012  I don't think there is a good secure way so far, but would like to have your opinion.  If I want user to create logbook for themselves, what's the best way to do it? I guess Execute $attribute = <command> may work, have it write       Re: secure way to allow users create logbook, posted by Stefan Ritt on Wed Aug 29 10:46:49 2012                            Szu-Ching Peckner wrote:                                            I don't think there is a good secure way so far, but would like to have your opinion.           Re: secure way to allow users create logbook, posted by Szu-Ching Peckner on Wed Aug 29 14:35:45 2012                            Stefan Ritt wrote:                                                                   Re: secure way to allow users create logbook, posted by Szu-Ching Peckner on Wed Aug 29 18:16:37 2012                            Stefan Ritt wrote:                                                                      Re: secure way to allow users create logbook, posted by Stefan Ritt on Thu Aug 30 10:00:07 2012                            Szu-Ching Peckner wrote:                                                                         Re: secure way to allow users create logbook, posted by Szu-Ching Peckner on Thu Aug 30 22:47:50 2012                            Stefan Ritt wrote:                                                            Difference between time and date formats, posted by David Pilgram on Wed Aug 29 22:44:39 2012  Hi, I hope I'm not missing the blindingly obvious here, but I have an issue with time and date formats       Re: Difference between time and date formats, posted by David Pilgram on Thu Aug 30 09:13:57 2012  OK, I see that $date can work in a different way; if the Thread display uses $date, then the present timestamp is substituted into the thread display line, rather than the  date that the entry is entered.  So, for example, in a whole list of entry and replies, the present   dynamic preset text, posted by Zbigniew Reszela on Wed Aug 29 10:26:31 2012  Dear all, Is it possible to have a dynamic "preset text" option? I would like to switch the template file depending on the attribute value. (Of course this attribute values will be a fixed list of options, not       Re: dynamic preset text, posted by Stefan Ritt on Wed Aug 29 10:37:44 2012                            Zbigniew Reszela wrote:                                            Dear all,          Re: dynamic preset text, posted by Zbigniew Reszela on Wed Aug 29 17:55:37 2012                            Stefan Ritt wrote:                                                            show permitted individual logbooks on selection page, posted by Szu-Ching Peckner on Tue Aug 28 22:48:47 2012  How do I make selection page show only list of logbooks that logged on user has access to?  Right now, say I have 4 logbooks, and I have access to 2 of them. I turned on Protect Selection page = 1. So when I go to home page, I need to logon first, then I am given selection page. I am given list of 4 logbooks, I can only click into 2, which is expected.     Where do I find information on setting up the text area as a template?, posted by Chris Jennings on Thu Aug 23 14:30:56 2012  I would like to set up the text are as a template. The documentation indicates this can be done however I am unable to find reference to how it is accomplished.       Re: Where do I find information on setting up the text area as a template?, posted by Stefan Ritt on Mon Aug 27 10:22:37 2012                            Chris Jennings wrote:                                            I would like to set up the text are as a template. The documentation indicates this can be done however   kerberos authentication , posted by Szu-Ching Peckner on Mon Aug 20 21:48:08 2012  Hello, I have authentication = kerberos kerberos Realm = xxx       Re: kerberos authentication , posted by Szu-Ching Peckner on Mon Aug 20 22:11:21 2012                            Szu-Ching Peckner wrote:                                            Hello, I have          Re: kerberos authentication , posted by Szu-Ching Peckner on Tue Aug 21 17:16:19 2012                            Szu-Ching Peckner wrote:                                                            Drop down search list?, posted by harley skorpenske on Thu Aug 16 15:27:34 2012   I'm having some confusion with configuring my logbook.  In the global section of the logbook I have the quick filter enabled, but it is not a drop down list, only an editable text field:         Re: Drop down search list?, posted by Stefan Ritt on Thu Aug 16 15:39:43 2012                            harley skorpenske wrote:                                             I'm having some confusion with configuring my logbook.  In the global section of the logbook          Re: Drop down search list?, posted by harley skorpenske on Thu Aug 16 15:55:32 2012                            Stefan Ritt wrote:                                                                      Re: Drop down search list?, posted by Stefan Ritt on Thu Aug 16 15:59:53 2012                            harley skorpenske wrote:                                            I forgot to mention - this is for searching the logbook.   So would the config file look more like                Re: Drop down search list?, posted by harley skorpenske on Thu Aug 16 16:12:49 2012                            Stefan Ritt wrote:                                            I know that this is for searching. But you don't get the point. You have attributes, like Date, Category,                   Re: Drop down search list?, posted by Stefan Ritt on Thu Aug 16 16:14:52 2012                            harley skorpenske wrote:                                            Thanks Stefan, I think I understand, and now I see the options definition on the syntax page.  I   Authentication problem with wget and links (text browser), posted by cowden on Wed Aug 8 21:23:59 2012  Hello, I'm not able to authenticate to a logbook using my text based browser links, so I've started investigating with wget hoping solving the problem one will lead to a solution for the other.  I've seen some examples on how to use wget to parse logbook entries in this forum, but my attempts keep       Re: Authentication problem with wget and links (text browser), posted by Andreas Luedeke on Fri Aug 10 11:47:49 2012                            cowden wrote:                                            Hello,   ssh tunneling with elog running under Apache, posted by Phil Rubin on Sun Jul 29 00:59:51 2012  In a configuration with elog running (8080) under Apache (80) [as explained in admin guide], what is the syntax for tunnelling in with ssh, of both the ssh command and the browser locator?       Re: ssh tunneling with elog running under Apache, posted by Phil Rubin on Sun Jul 29 15:43:20 2012                            Phil Rubin wrote:                                            In a configuration with elog running (8080) under Apache (80) [as explained in admin guide], what is the syntax for   Number of conditional attributes, posted by Richard Stamper on Wed Jul 4 13:58:23 2012  Is there a limit on the number of conditions that can be simultaneously active in a log?  When I activate more than 10 conditions I start to see side effects with other conditions being deactivated.  I think this is due to the hard-coded array size of 10 for clist in the match_param function in elogd.c.  If so, could this limit be increased?         Re: Number of conditional attributes, posted by Stefan Ritt on Fri Jul 13 10:45:49 2012                            Richard Stamper wrote:                                            Is there a limit on the number of conditions that can be simultaneously active in a log?  When          Re: Number of conditional attributes, posted by Richard Stamper on Fri Jul 13 17:09:58 2012                            Stefan Ritt wrote:                                                            Problems with Autorization, posted by Michael Dannmeyer on Wed Jun 27 10:42:20 2012  Hello, we used Admin and write passwords. Now this is no longer supported in ELOG 2.9.0 and I tried to change to File or Kerberos Autentication. But nothing worked. I tried the following lines in elog.cfg       Re: Problems with Autorization, posted by Andreas Luedeke on Wed Jul 4 14:04:10 2012                            Michael Dannmeyer wrote:                                            Hello,          Re: Problems with Autorization, posted by Michael Dannmeyer on Thu Jul 5 11:18:40 2012                            Andreas Luedeke wrote:                                               Re: Problems with Autorization, posted by Stefan Ritt on Fri Jul 13 09:03:02 2012                            Michael Dannmeyer wrote:                                                                         Re: Problems with Autorization, posted by Michael Dannmeyer on Fri Jul 13 15:12:07 2012                            Stefan Ritt wrote:                                         move a type of entries to another logbook, posted by Ze Li on Tue Jul 3 09:46:19 2012  Hi, I have logbook A and logbook B.  Is it possible to move one type of entries in logbook A to logbook B?  If yes, may I know how you do it?  Thank you.       Re: move a type of entries to another logbook, posted by Andreas Luedeke on Wed Jul 4 14:18:21 2012                            Ze Li wrote:                                            [...] I have logbook A and logbook B.  Is it possible to move one type of entries in logbook A to logbook   Compiling Elog for QNAP NAS x86, posted by Per Eriksson on Tue May 1 11:38:05 2012  Hi All, I am interested to have ELOG installed in my QNAP x86 based NAS (239 Pro II) Have someone done this already or is there a write-up of a normal compile-procedure which I can have as a base when I attempt to compile?       Re: Compiling Elog for QNAP NAS x86, posted by Per Eriksson on Tue May 1 17:03:37 2012                            Per Eriksson wrote:                                            Hi All,          Re: Compiling Elog for QNAP NAS x86, posted by Per Eriksson on Sun Jul 1 19:55:38 2012                            Per Eriksson wrote:                                                            Attachment URL login redirect error, posted by Graham Medlin on Wed Jun 27 14:56:43 2012  If I have a couple of attachments in a log book entry, I can link to that entry "http://example.edu/elog/Sandbox/7", I get the appropriate log in page, and after logging it, it takes me to the entry. However, if I link directly an attachment, "http://example.edu/elog/Sandbox/7/1",   author field in reply, posted by Aldo Saavedra on Sun Apr 15 22:53:41 2012  Hi, I was wondering what is the correct way so that the author field when a reply is made shows the author of the       Re: author field in reply, posted by A. Tuttle on Wed Apr 18 21:53:26 2012  Look in  [URL=https://midas.psi.ch/elog/config.html]https://midas.psi.ch/elog/config.html[/URL] -- Fun things to set are:          Re: author field in reply, posted by Ken Harvey on Tue Jun 19 04:02:43 2012  [quote="A. Tuttle"]Look in  [URL=https://midas.psi.ch/elog/config.html]https://midas.psi.ch/elog/config.html[/URL] -- Fun things to set are:             Re: author field in reply, posted by Andreas Luedeke on Wed Jun 20 16:16:56 2012  [quote="Ken Harvey"][quote="A. Tuttle"]Look in  [URL=https://midas.psi.ch/elog/config.html]https://midas.psi.ch/elog/config.html[/URL] -- Fun things to set are:                Re: author field in reply, posted by Ken Harvey on Thu Jun 21 05:29:59 2012  [quote="Andreas Luedeke"][quote="Ken Harvey"][quote="A. Tuttle"]Look in  [URL=https://midas.psi.ch/elog/config.html]https://midas.psi.ch/elog/config.html[/URL] -- Fun things to set are:   Periodic backup doesn't work .., posted by Roland Gsell on Mon May 21 14:41:25 2012  Hi, I installed ELOG on other machine for making automatic backups. I copied the .cfg file to the slave and edited the .cfg file on the original machine (mirror server entries).       Re: Periodic backup doesn't work .., posted by Roland Gsell on Tue Jun 12 10:38:34 2012  The synchronize feature is totally worthless to me. First of all the automatic backup doesn't work - and nobody seems to know why - and pressing the synchronize button by hand from time to time also doesn't work if the entry is too big:    How does SVN info get placed in source?, posted by Tim Thiel on Wed May 23 05:29:35 2012  In the elogd.c file nearly at the very top is the following line: char svn_revision[] = "$Id: elogd.c 2411 2011-04-01 14:39:35Z ritt $"; How does this information get into the source file?  Is it a script used when the svn changes are committed, or perhaps when they are checked       Re: How does SVN info get placed in source?, posted by Stefan Ritt on Thu May 31 11:40:15 2012                            Tim Thiel wrote:                                            In the elogd.c file nearly at the very top is the following line:   ELOG 'Dashboard', posted by NOCinator on Wed May 16 21:05:11 2012   First, I really appreciate this software. Thank you. Next, I have question - am wanting to have a 'dashboard' of sorts that shows all entries that are 'open'. That part is easy enough. But, then I want to color the time (or some other field) if the ELOG has not been updated/created for more than X hours. This will help us keep track of events that       Re: ELOG 'Dashboard', posted by Stefan Ritt on Fri May 18 13:10:59 2012                            NOCinator wrote:                                             First, I really appreciate this software. Thank you.   Locked attributes and edit records, posted by UlfO on Mon May 14 18:15:44 2012  Hi! After submitting a new record with preset "Locked attributes" not even admin user is able to edit these entries. What seems to be the problem?       Re: Locked attributes and edit records, posted by Stefan Ritt on Tue May 15 08:34:21 2012                            UlfO wrote:                                           Hi!          Re: Locked attributes and edit records, posted by UlfO on Tue May 15 10:12:37 2012                            Stefan Ritt wrote:                                                   Re: Locked attributes and edit records, posted by Stefan Ritt on Tue May 15 10:29:26 2012                            UlfO wrote:                                           But it says locked on "websubmission" in the instructions for the command "Locked attributes".                Re: Locked attributes and edit records, posted by UlfO on Tue May 15 12:42:15 2012                            Stefan Ritt wrote:                                                         Re: Locked attributes and edit records, posted by Stefan Ritt on Tue May 15 12:49:54 2012                            UlfO wrote:                                                                              Re: Locked attributes and edit records, posted by UlfO on Tue May 15 14:05:03 2012                            Stefan Ritt wrote:                                                               Re: Locked attributes and edit records, posted by Stefan Ritt on Tue May 15 14:14:35 2012                            UlfO wrote:                                                           HW Requirements to run elog / Performance issues running on ARM, posted by Tim Thiel on Wed May 9 21:48:42 2012  Our group is interested in installing elog on a small/low-cost processing platform so that we can provide ready-to-run systems for our collaborators to use.  We selected a candidate platform form Technologic Systems, their wifibox-2 (http://www.embeddedarm.com/products/board-detail.php?product=TS-WIFIBOX-2).  This product is based on the TS7553 CPU board (http://www.embeddedarm.com/products/board-detail.php?product=TS-7553#) which has a 250MHz Cavium ARM9 CPU.       Re: HW Requirements to run elog / Performance issues running on ARM, posted by Yoshio Imai on Thu May 10 15:34:39 2012  Hi! Looking at your config file it seems that a lot of the attributes are not user-specified but rather auto-generated content. You may want to consider using the elog client to submit such entries; this might avoid performance issues related to communication of the server with the web browser          Re: HW Requirements to run elog / Performance issues running on ARM, posted by Tim Thiel on Thu May 10 16:35:50 2012                            Yoshio Imai wrote:                                            Hi!             Re: HW Requirements to run elog / Performance issues running on ARM, posted by Stefan Ritt on Fri May 11 13:20:35 2012                            Tim Thiel wrote:                                                                         Re: HW Requirements to run elog / Performance issues running on ARM, posted by Tim Thiel on Mon May 14 22:19:50 2012                            Stefan Ritt wrote:                                                                            Re: HW Requirements to run elog / Performance issues running on ARM, posted by Stefan Ritt on Tue May 15 08:35:16 2012                            Tim Thiel wrote:                                                            Adding an image to the top text, posted by Danielle Gillanders on Wed May 9 00:55:08 2012  Hi there, I am new to ELOG, trying to add an image (logo) in my top text. Theme = default       Re: Adding an image to the top text, posted by David Pilgram on Wed May 9 01:07:43 2012                            Danielle Gillanders wrote:                                            Hi there,   Access rights, posted by Roland Gsell on Mon May 7 13:41:38 2012  Hi, the manual says: "       Re: Access rights, posted by Stefan Ritt on Mon May 7 15:12:24 2012                            Roland Gsell wrote:                                            Hi,   password protect a logbook with Apache redirect, posted by Matt Newville on Wed May 2 17:06:35 2012  Hi, I'm trying to set up elogd, running on port 8080 behind an Apache server on port 80, using mod_proxy to redirect       Re: password protect a logbook with Apache redirect, posted by Stefan Ritt on Wed May 2 17:09:25 2012  > Is there a way to make this (password protecting logbooks while also using a proxy to Apache) work? I use it with the current version and it works fine for me. What you might be missing is the       Re: password protect a logbook with Apache redirect, posted by Graham Medlin on Wed May 2 17:18:36 2012  I don't remember the details, but originally had the same trouble. I think a "/" at the end of a url got me somewhere.  I have defined...          Re: password protect a logbook with Apache redirect, posted by Matt Newville on Wed May 2 18:19:18 2012  > I don't remember the details, but originally had the same trouble. I think a "/" at the end of a url got me somewhere.  > I have defined... >    Forgot Password, posted by Christopher Lee on Mon Apr 16 11:10:07 2012  We seem to have a problem with retrieving user passwords using the forgot password system This only happens when trying to use the password recovery from the first screen that forces people to log in with the following syntax: Protect selection page = 1       Re: Forgot Password, posted by Stefan Ritt on Mon Apr 30 17:05:28 2012                            Christopher Lee wrote:                                            We seem to have a problem with retrieving user passwords using the forgot password system           Re: Forgot Password, posted by Christopher Lee on Tue May 1 09:20:00 2012                            Stefan Ritt wrote:                                                                                     Re: Forgot Password, posted by Stefan Ritt on Wed May 2 09:17:56 2012                            Christopher Lee wrote:                                                            obfuscate password in verbose logging, posted by Mark Bergman on Thu Apr 26 23:57:04 2012  I'm trying to debug an issue with elogd (2.9.1) and was reminded that using the "-v" option exposes user passwords. This wasn't a huge problem for us in the past, but we're now using kerberos authentication, meaning that the exposed username/password applies to lots of sensitive systems within our university.       Re: obfuscate password in verbose logging, posted by Mark Bergman on Fri Apr 27 00:29:56 2012  > I'd suggest that the "-v" option hide passwords. If they need to be revealed for debugging   create "front page" for a logbook, posted by Rex Tayloe on Thu Mar 29 17:30:28 2012  Is there a way to create a "front page" or "table of contents" for a logbook? While chronological entries are good and what elog was designed for, I find myself wanting a page to summarize important things and/or link to important files that are somewhere in that logbook.  And, I would like to use the features of the elog editor to do (not just       Re: create "front page" for a logbook, posted by Stefan Ritt on Thu Mar 29 23:43:30 2012                            Rex Tayloe wrote:                                            Is there a way to create a "front page" or "table of contents" for a logbook?          Re: create "front page" for a logbook, posted by Rex Tayloe on Tue Apr 17 21:59:43 2012                            Stefan Ritt wrote:                                                                           SSL, posted by Thomas Kleeb on Wed Apr 11 16:32:22 2012  I'm slowly able to see the finish line  Now all I need to do is get SSL to work. My server name is hf-info-elog and I'm not sure what the correct values for Port= and URL= should be. thank       Re: SSL, posted by Stefan Ritt on Wed Apr 11 16:43:37 2012                            Thomas Kleeb wrote:                                            I'm slowly able to see the finish line    Kerberos authentication, posted by Thomas Kleeb on Wed Apr 11 13:09:56 2012  Hello to @all First please let me say that I'm a complete green-horn when it comes to linux        Re: Kerberos authentication, posted by Stefan Ritt on Wed Apr 11 13:17:48 2012                            Thomas Kleeb wrote:                                            Hello to @all          Re: Kerberos authentication, posted by Thomas Kleeb on Wed Apr 11 13:42:29 2012                            Stefan Ritt wrote:                                                                                     Re: Kerberos authentication, posted by Stefan Ritt on Wed Apr 11 13:51:27 2012                            Thomas Kleeb wrote:                                                                         Re: Kerberos authentication, posted by Thomas Kleeb on Wed Apr 11 14:00:52 2012                            Stefan Ritt wrote:                                                                                           Re: Kerberos authentication, posted by Stefan Ritt on Wed Apr 11 14:04:33 2012                            Thomas Kleeb wrote:                                            Like I said in the beginning, I'm a linux green-horn                       Re: Kerberos authentication, posted by Thomas Kleeb on Wed Apr 11 14:36:43 2012                            Stefan Ritt wrote:                                                                           Hyperlink in attributes and autoincrement, posted by Arno Teunisse on Mon Feb 20 20:33:32 2012  Hello Want a hyperlink in one of the attributes like this : http://Someserver/someDir/perl.pl#subject In this way I should be able to redirect to a certain part of the html that the perl script is generating. When I setup this manually it works.       Re: Hyperlink in attributes and autoincrement, posted by Stefan Ritt on Tue Apr 10 15:53:48 2012                            Arno Teunisse wrote:                                            Hello   segfault on empty, non-writable passwd file, posted by Achim Dreyer on Mon Mar 26 13:44:23 2012    Segfault when password file is empty and not writable a segmentation fault is generated when a new user tries to register:         Re: segfault on empty, non-writable passwd file, posted by Stefan Ritt on Tue Apr 10 15:35:07 2012                            Achim Dreyer wrote:                                                Preset Text?, posted by Grant on Mon Apr 9 15:02:24 2012  Hi Stefan, I'm having a problem with 'Preset Text' now behaving differently in the latest release (2.9.1)?       Re: Preset Text?, posted by Stefan Ritt on Tue Apr 10 10:08:33 2012  > Hi Stefan, >  > I'm having a problem with 'Preset Text' now behaving differently in the latest release (2.9.1)?   wrong version number in spec file, posted by Achim Dreyer on Mon Apr 9 19:58:51 2012  localhost$ svn diff elog.spec Index: elog.spec =================================================================== --- elog.spec (revision 2446) +++ elog.spec   Import a CSV, posted by Ben on Mon Apr 2 15:46:59 2012   I am trying to import a CSV file in to a logbook. The Attributes seem to import fine but it kicks out the first 2 columns of data and shifts the data over to the left by 2 columns. Has anyone tried to do this?       Re: Import a CSV, posted by Stefan Ritt on Mon Apr 2 15:48:25 2012                            Ben wrote:                                            I am trying to import a CSV file in to a logbook. The Attributes seem to import fine but it kicks out the first 2 columns of data and          Re: Import a CSV, posted by Ben on Mon Apr 2 16:07:48 2012                            Stefan Ritt wrote:                                                                      Re: Import a CSV, posted by Stefan Ritt on Mon Apr 2 17:06:33 2012                            Ben wrote:                                                                                                     Re: Import a CSV, posted by Ben on Mon Apr 2 17:24:17 2012                            Stefan Ritt wrote:                                                            RSS Feed, posted by leen smit on Thu Mar 29 13:01:26 2012  Hi All, Just a quick message in the hope of helping other find an answer to the question: How to reach the RSS Feed???       Re: RSS Feed, posted by Stefan Ritt on Thu Mar 29 15:19:05 2012  [quote="leen smit"]Hi All, Just a quick message in the hope of helping other find an answer to the question: How to reach the RSS Feed???          Re: RSS Feed, posted by leen smit on Thu Mar 29 15:38:43 2012  [quote="Stefan Ritt"] Actually the browser should show an RSS icon to help you subscribing to it. In Firefox 3 that was at least the case. Now they removed it. See here for             Re: RSS Feed, posted by Stefan Ritt on Mon Apr 2 15:45:30 2012  [quote="leen smit"][quote="Stefan Ritt"] Actually the browser should show an RSS icon to help you subscribing to it. In Firefox 3 that was at least the case. Now they removed it. See here for             Re: RSS Feed, posted by Stefan Ritt on Mon Apr 2 15:55:00 2012  [quote="leen smit"][quote="Stefan Ritt"] Actually the browser should show an RSS icon to help you subscribing to it. In Firefox 3 that was at least the case. Now they removed it. See here for   RSS Feed, posted by leen smit on Thu Mar 29 13:01:17 2012  Hi All, Just a quick message in the hope of helping other find an answer to the question: How to reach the RSS Feed??? I spend hours trying to find out what the correct URL is to reach the feed. The documentation on this is non-existent - at least we could't find this anywhere in the docs. Answer:  Just add elog.rdf at the end of the URL of the logbook!! eg.   http://midas.psi.ch/elogs/Forum/elog.rdf Leen   mySQL / SQL synchronisation, posted by Etienne Van Caillie on Fri May 23 09:17:30 2003  does anybody has interest with a full synchronisation  between elog logbook on mySQL and SQL database       Re: mySQL / SQL synchronisation, posted by rus on Wed Mar 28 04:05:01 2012  > does anybody has interest with a full synchronisation  > between elog logbook > on mySQL and SQL database   Elog on Windows Server 2008 R2, 64 bit, posted by Alan Grant on Fri Mar 16 23:59:10 2012  Any known issues running in Win Server 2008 R2, 64 bit environment? We sometimes lose connection with the Elog app (ssl) and wonder if due to 64bit or other factor in this set up. A forum search does not explicitly reveal any clues however I did find an entry from someone posting a similar question without a response yet (#67061).   Truncation of the displayed text in Summary view of the list of entries, posted by Olivier Callot on Thu Mar 8 10:01:47 2012  In the summary view, it seems that the text is truncated at the first "<" character. See https://lblogbook.cern.ch/Shift/48812 for a simple entry, then use the 'list' command to see that only a very small part is displayed.       Re: Truncation of the displayed text in Summary view of the list of entries, posted by Stefan Ritt on Wed Mar 14 14:38:10 2012                            Olivier Callot wrote:                                            In the summary view, it seems that the text is truncated at the first "<" character. See          Re: Truncation of the displayed text in Summary view of the list of entries, posted by Olivier Callot on Wed Mar 14 15:08:17 2012                            Stefan Ritt wrote:                                                   Re: Truncation of the displayed text in Summary view of the list of entries, posted by Stefan Ritt on Wed Mar 14 16:04:04 2012                            Olivier Callot wrote:                                                            Record Proliferation, posted by Paraic Fahey on Mon Mar 5 16:19:24 2012  Saving, using Submit sees recently updated fields cleared after hitting SUBMIT. MOre significantly this then leads to a proliferation of instances of the same record being generated in the logfile and consequently on the logbook. Has anybody a fix or advice on this?       Re: Record Proliferation, posted by Stefan Ritt on Wed Mar 14 14:45:23 2012                            Paraic Fahey wrote:                                            Saving, using Submit sees recently updated fields cleared after hitting SUBMIT.          Re: Record Proliferation, posted by David Pilgram on Wed Mar 14 15:34:41 2012                            Stefan Ritt wrote:                                                            New user: problem with configuration (password file), posted by Nicolas FRANCOIS on Thu Feb 23 16:23:10 2012  Hi.   I'd like to use elog as a tool ta keep my notes, links, passwords... It's installed on my personal computer at home (Debian Squeeze), behind a   Number of Thumnails , posted by Diego on Wed Feb 22 14:19:19 2012   Hi, I have Ghostscript 9.05 and ImageMagic 6.7.5 Q16 installed with the last ELOG version in a windows 7 OS. When I try to attach a pdf file and then create thumnails of the file, I am only able to create the first 8 pages instead all document. I have try to change the parameter Thumbnail size  but   redirect permission, posted by Adam on Mon Feb 13 13:38:19 2012  Hi All, Perhaps a trivial question but some issues have arisen accessing my long-running elog with SSL enabled.  I suspect firewalls and browser updates are involved and I do not have the time or experience to diagnose and debug such a potential black-hole of difficulties.  Instead I am looking for       Re: redirect permission, posted by Adam on Wed Feb 22 13:18:37 2012                            Adam  wrote:                                           Hi All,   ssl problems, posted by Olaf Kasten on Fri Feb 10 11:54:35 2012   Hi there, I have a connection problem with an actual elog installation. Many Browsers like as Chrome, Firefox and IE don't  connect to the elog server with ssl = 1 in elogd.cfg.        Re: ssl problems, posted by John Doroshenko on Fri Feb 10 17:18:25 2012                            Olaf Kasten wrote:                                             Hi there,          Re: ssl problems, posted by Andreas Luedeke on Sat Feb 11 05:43:33 2012                            John Doroshenko wrote:                                                                      Re: ssl problems, posted by Christian Herzog on Sat Feb 11 22:05:36 2012                            Andreas Luedeke wrote:                                                                         Re: ssl problems, posted by Andreas Luedeke on Sat Feb 11 22:19:07 2012                            Christian Herzog wrote:                                                                            Re: ssl problems, posted by Christian Herzog on Sat Feb 11 22:27:15 2012  well it's not a server but my laptop, but yeah, the elog server and the browser ran on the same machine, no iptables.                      Re: ssl problems, posted by Andreas Luedeke on Sat Feb 11 22:37:34 2012  > well it's not a server but my laptop, but yeah, the elog server and the browser ran on the same machine, no iptables. Strange: I thought I was able to reproduce your problem, but no: whatever browser I try I can access ELOG with SSL if                         Re: ssl problems, posted by Olaf Kasten on Mon Feb 13 21:44:05 2012  > > well it's not a server but my laptop, but yeah, the elog server and the browser ran on the same machine, no iptables. >  > Strange: I thought I was able to reproduce your problem, but no: whatever browser I try I can access ELOG with SSL if             Re: ssl problems, posted by John Doroshenko on Tue Feb 14 00:55:58 2012                            Andreas Luedeke wrote:                                                                         Re: ssl problems, posted by Andreas Luedeke on Tue Feb 14 14:54:06 2012                            John Doroshenko wrote:                                                                Re: ssl problems, posted by Diego on Tue Feb 14 17:17:44 2012                            Andreas Luedeke wrote:                                                                         Re: ssl problems, posted by John Doroshenko on Tue Feb 14 20:41:08 2012                            John Doroshenko wrote:                                                                            Re: ssl problems, posted by Stefan Ritt on Thu Feb 16 18:10:33 2012  Yes, there is a new feature called record splitting which causes the browser to send the "G" of the "GET ..." in a dedicated TCP package. This started in FF10, Chrome 17, and it will come in others as well. It only affects direct SSL connections (SSL=1). I fixed the bug in SVN revision #2435. Please update also MXML to revision #73. Let's hope that surprises like that will not happen too often.                      Re: ssl problems, posted by John Doroshenko on Thu Feb 16 23:56:35 2012                            Stefan Ritt wrote:                                            Yes, there is a new feature called record splitting which causes the browser to send the "G"                      Re: ssl problems, posted by Stefan Ritt on Mon Feb 20 14:53:04 2012                            Stefan Ritt wrote:                                            Yes, there is a new feature called record splitting which causes the browser to send the "G"   elog entry in email footer?, posted by Mark Bergman on Wed Feb 15 17:17:27 2012  On our system, elog sends email to all people associated with an entry. Often, people will respond via email, not through elog. I'm in the process of setting up a handler for the inbound email. However, I'd like to have the outbound mail from eLog include a 'footer' to each message the details where to go to respond.   top text in new user, posted by Diego on Mon Feb 13 22:13:40 2012   Hi, I am using Top text becouse I would like to have the same header in all logbooks. However it is working in the "new user registration page" and I would like to evoid it. Is that possible?   problems with https in Chrome and IE, posted by Christian Herzog on Wed Jan 25 10:07:16 2012   Hi,   we're evaluating elog right now at the Physics Department of ETH Zurich and I'm trying to come up with a good config. One of the first steps of       Re: problems with https in Chrome and IE, posted by Andreas Luedeke on Wed Jan 25 10:50:43 2012                            Christian Herzog wrote:                                            [...] we're evaluating elog right now at the Physics Department of ETH Zurich and I'm trying to          Re: problems with https in Chrome and IE, posted by Christian Herzog on Wed Jan 25 14:05:46 2012                            Andreas Luedeke wrote:                                                                      Re: problems with https in Chrome and IE, posted by Andreas Luedeke on Wed Jan 25 14:48:36 2012                            Christian Herzog wrote:                                                                         Re: problems with https in Chrome and IE, posted by Christian Herzog on Wed Jan 25 15:08:53 2012                            Andreas Luedeke wrote:                                                                            Re: problems with https in Chrome and IE, posted by Andreas Luedeke on Wed Jan 25 15:26:04 2012                            Christian Herzog wrote:                                                                               Re: problems with https in Chrome and IE, posted by Christian Herzog on Wed Jan 25 15:33:59 2012                            Andreas Luedeke wrote:                                                                                  Re: problems with https in Chrome and IE, posted by Yoshio Imai on Wed Jan 25 15:40:17 2012  Might this be related to the problem reported by [url=elog:67160]Allen[/url]?                            Re: problems with https in Chrome and IE, posted by Christian Herzog on Wed Jan 25 15:42:17 2012  [quote="Yoshio Imai"]Might this be related to the problem reported by [url=elog:67160]Allen[/url]?[/quote]   can't tell, but Chrome on Linux doesn't work either...                         Re: problems with https in Chrome and IE, posted by Andreas Luedeke on Wed Jan 25 16:05:13 2012                            Christian Herzog wrote:                                                                                     Re: problems with https in Chrome and IE, posted by Christian Herzog on Wed Jan 25 16:13:22 2012                            Andreas Luedeke wrote:                                                                                        Re: problems with https in Chrome and IE, posted by Christian Herzog on Wed Jan 25 19:47:38 2012                            Christian Herzog wrote:                                                                                           Re: problems with https in Chrome and IE, posted by Andreas Luedeke on Sat Feb 11 05:47:27 2012                            Christian Herzog wrote:                                                                                              Re: problems with https in Chrome and IE, posted by Christian Herzog on Sat Feb 11 22:07:37 2012                            Andreas Luedeke wrote:                                                                                                 Re: problems with https in Chrome and IE, posted by Diego on Mon Feb 13 18:36:29 2012                            Christian Herzog wrote:                                                            el cheapo LDAP binding, posted by Christian Herzog on Fri Jan 27 14:05:09 2012  Hi all,   we would like to hook elog to our LDAP server. Instead of writing a full-featured LDAP auth module for elog, I have the following idea: use Apache's       Re: el cheapo LDAP binding, posted by Christof Hanke on Mon Jan 30 09:31:51 2012  Hi Christian,  I have also the need to do auth on the webserver, but  I tried to integrate it into elogd as far  as I could. However, I do not try to set a special cookie to set the username, but always use           Re: el cheapo LDAP binding, posted by Christian Herzog on Fri Feb 3 09:30:20 2012  Hi Christof,   wow thanks, that's (almost) exactly what I was looking for! I only had to add   Migrate to elog, posted by Kenneth Nielsen on Thu Feb 2 16:51:32 2012  Hallo and thanks for a great program. At my work we have previously been using another program (Rednotebook) for our lab journals, but now we wish to migrate to elog because it is more configurable and because it runs in a browser.   Return Code, posted by Alan Grant on Fri Jan 27 02:26:02 2012  We are using the Elog client from one vlan to insert entries into our Elog system on a different vlan. Works fine for the most part but we occasionally have network connection issues which prevents some entries from being added, and we don't find out about it until later.       Re: Return Code, posted by Yoshio Imai on Mon Jan 30 18:23:39 2012  It depends on how you actually call the elog client, but it outputs a message  Message successfully transmitted, ID=(new message id) to the console upon successful transmission. Maybe you can catch this and evaluate?   Elog does not work after installing MS12-006/MS12-012 on Win 7, posted by Allen on Wed Jan 11 22:19:49 2012  After patching a windows 7 computer with MS12-006, can no longer connect to elog, get page cannot be displayed See http://support.microsoft.com/kb/2643584       Re: Elog does not work after installing MS12-006/MS12-012 on Win 7, posted by Allen on Thu Jan 12 19:34:28 2012                            Allen wrote:                                            After          Re: Elog does not work after installing MS12-006/MS12-012 on Win 7, posted by Allen on Thu Jan 12 19:37:52 2012                            Allen wrote:                                                         Re: Elog does not work after installing MS12-006/MS12-012 on Win 7, posted by Stefan Ritt on Fri Jan 13 14:33:04 2012                            Allen wrote:                                                           Problems with Version 2.9.0 Service did not start, posted by Michael Dannmeyer on Wed Dec 7 14:18:41 2011  Hello, I tried to update our ELOG installation 2.7.8 to 2.9.0. If I try to start the service i get the error:         Re: Problems with Version 2.9.0 Service did not start, posted by Stefan Ritt on Wed Dec 14 10:18:37 2011                            Michael Dannmeyer wrote:                                            Hello,          Re: Problems with Version 2.9.0 Service did not start, posted by Grant Jeffcote on Sat Dec 17 17:20:05 2011                            Stefan Ritt wrote:                                                                                     Re: Problems with Version 2.9.0 Service did not start, posted by Michael Dannmeyer on Fri Dec 23 14:31:27 2011                            Grant Jeffcote wrote:                                      My current Elog works fine with v2.6 but not 2.9, posted by Hung Dao on Fri Nov 11 17:44:45 2011  I have been using v2.6.  I works fine so far for what I need except that I could not disable the attachments in the notification emails.  Now I need to upgrade to a latest version v2.9.  However, with this latest version, I've received this error when navigate pages:  "Error: Too many parameters (> 120). Cannot perform operation".   What does this error mean?        Re: My current Elog works fine with v2.6 but not 2.9, posted by Stefan Ritt on Mon Dec 19 13:10:27 2011                            Hung Dao wrote:                                            I have been using v2.6.  I works fine so far for what I need except that I could not disable the   Build with Visual Studio 2010?, posted by Hung Dao on Fri Dec 16 18:28:58 2011  First I have tried to checkout the source code and got an error shown in below.  So, I clicked on the Web Access link to download the trunk.tar.gz.  I have opened elogd.sln in Visual Studio 2010.  Despite of downloading openssl and and installing krb5, I still received errors related to header files that could not be opened or found.  Has   Cascading menus???, posted by ron murphy on Tue Nov 29 18:12:40 2011  This may be already answered somewhere around here, but I could not find it.   Question: Is it possible to have a pull down will a sub menu.  Something like,         Re: Cascading menus???, posted by Eoin Butler on Tue Dec 13 22:18:04 2011                            ron murphy wrote:                                            This may be already answered somewhere around here, but I could not find   Disable attachment in notification email message?, posted by Hung Dao on Wed Nov 9 23:58:37 2011  I have tried to set Email Format = 111 but still receiving attachments in the notification emails.  Does anyone know how to configure?  So the notification email will not include attachments. Thanks in advance,       Re: Disable attachment in notification email message?, posted by Stefan Ritt on Thu Nov 10 09:03:55 2011                            Hung Dao wrote:                                            I have tried to set Email Format = 111 but still receiving attachments in the notification emails.           Re: Disable attachment in notification email message?, posted by Mike Bodine on Fri Nov 18 17:38:04 2011                            Stefan Ritt wrote:                                                                           Global Synchronization with 2.9.0, posted by Steve Nahn on Wed Nov 9 20:15:38 2011  Hi   I just updated my mirror server, which I just use as a backup to my main server, to 2.9.0 and found that after logging in (the selection page is not protected, but the individual logbooks are) and coming back to the selection page I no longer get the "Synchronize all logbooks"   multiple homes?, posted by Christoph Kukulies on Wed Nov 2 10:49:02 2011  Is it possible to have many roots with one elogd (or run several elogds), such that you can seaparate different groups or themes from each other:   electronics       Re: multiple homes?, posted by Stefan Ritt on Wed Nov 2 10:54:38 2011                            Christoph Kukulies wrote:                                            Is it possible to have many roots with one elogd (or run several elogds), such that you can seaparate          Re: multiple homes?, posted by Christoph Kukulies on Mon Nov 7 10:12:04 2011                            Stefan Ritt wrote:                                                            Search Option, posted by Carl Shirey on Tue Nov 1 14:04:50 2011  Is there a way to setup a search, to search several log books but not all the logs books at one time? Thanks Carl       Re: Search Option, posted by Stefan Ritt on Wed Nov 2 21:35:13 2011                            Carl Shirey wrote:                                            Is there a way to setup a search, to search several log books but not all the logs books at one time?   Extendable Moption, posted by Michael Simoen on Tue Nov 1 01:29:59 2011  Hi, I'm currently trying to setup a logbook which will contain process descriptions. One of the attributes will be the resists that are used. This could be more than one resist, hence I try to use MOptions but users should also be able to add materials to the selection list. When I write the following,   undesired side effect of using an attribute "Entry", posted by Andreas Luedeke on Thu Oct 27 14:05:35 2011  If you use an attribute "Entry" then the internal variable "entry time" will expand to the last value of "$Entry"+" time", e.g. if you use it in "Thread display = $entry time, ..."   elogd crash for special query, posted by Andreas Luedeke on Thu Oct 27 11:29:08 2011  A query to a logbook can crash the demon. Query:   Rename Logbook, posted by mike cianci on Sun Sep 4 23:01:15 2011  I have a logbook with data in it that I need  to  rename  and preserve the the existing data (old book) in the newly named book (i.e. can I move all of the data from one book to a new book and than delete the data from the original book)? As always thank you for your time.       Re: Rename Logbook, posted by Stefan Ritt on Mon Sep 5 17:10:19 2011                            mike cianci wrote:                                            I have a logbook with data in it that I need  to  rename  and preserve the the existing          Re: Rename Logbook, posted by mike cianci on Fri Sep 23 01:16:30 2011                            Stefan Ritt wrote:                                                            Re: Rename Logbook, posted by David Pilgram on Fri Sep 23 10:46:58 2011                            mike cianci wrote:                                                                         Re: Rename Logbook, posted by Stefan Ritt on Mon Sep 26 11:34:36 2011                            David Pilgram wrote:                                            Anyway, Stefan <i>et al</i> have got CERN's faster-than-light particle problem to deal with                   Re: Rename Logbook, posted by mike cianci on Fri Sep 30 22:38:43 2011                            Stefan Ritt wrote:                                                                     Re: Rename Logbook, posted by David Pilgram on Fri Sep 30 22:55:01 2011                            mike cianci wrote:                                                            Digest page or email?, posted by Graham Medlin on Wed Sep 28 22:10:30 2011  We have about 10 logbooks running on the same Elog that all get fair use. Many people have turned off new entry emails because they were filling up inboxes, but are still interested in what's new. I saw the option to add "?last=1" to the start page, although I'm afraid using it might cause confusion over how to get to the older posts.       Re: Digest page or email?, posted by Stefan Ritt on Thu Sep 29 10:12:40 2011                            Graham Medlin wrote:                                            We have about 10 logbooks running on the same Elog that all get fair use. Many people have turned          Re: Digest page or email?, posted by Graham Medlin on Thu Sep 29 16:55:25 2011                            Stefan Ritt wrote:                                         Memory Leak in V2.9.0-2411 (Mirroring Related), posted by Ryan on Tue Sep 20 04:46:55 2011  I have two identical servers (IBM X337) setup on the same LAN with Ubuntu Linux 10.04 LTS with ELOGD running (Compiled from tarbell) with the same exact package install base. (Only difference between the two servers is the hostname, and the ELOGD.CFG global section) I noticed after setting these servers up today that ELOGD crashed on the server configured to mirror. It looks like   Elog crashes with URL find npp=0, posted by Andreas Luedeke on Tue Sep 13 11:54:16 2011  Some user wanted to modify the URL by hand and succeeded to crash the elogd process with npp=now It appears that npp=0 crashes elogd with the following error message:       Re: Elog crashes with URL find npp=0, posted by Andreas Luedeke on Tue Sep 13 13:38:19 2011  > [...] It appears that npp=0 crashes elogd [...] Here's a patch: search for "npp" in src/elogd.c and add the following line:   Expiration of ELOG forum accounts, posted by Stefan Ritt on Fri Sep 9 12:54:13 2011  Dear ELOG users, the ELOG discussion forum at PSI contains in meantime many old accounts with non-functional email addresses. Since this causes some overhead, it has been decided to clean up the current account database. In order to keep your account alive, please   Password may not contain blanks, posted by Terry Shuck on Tue Aug 30 20:58:18 2011  After setting up email addresses for notifications I noticed that the "Full Name" has part of an email address in it. I've tried several ways to correct this however it keeps sending me to a page that says "Password may not contain blanks" and I've not done anything with the password. Can you tell me how to correct this issue?       Re: Password may not contain blanks, posted by Stefan Ritt on Wed Aug 31 15:21:03 2011                            Terry Shuck wrote:                                            After setting up email addresses for notifications I noticed that the "Full Name" has part          Re: Password may not contain blanks, posted by Terry Shuck on Wed Aug 31 16:21:23 2011                            Stefan Ritt wrote:                                                   Re: Password may not contain blanks, posted by Stefan Ritt on Wed Aug 31 16:33:39 2011                            Terry Shuck wrote:                                                                         Re: Password may not contain blanks, posted by Terry Shuck on Wed Aug 31 17:02:40 2011                            Stefan Ritt wrote:                                                         Re: Password may not contain blanks, posted by Stefan Ritt on Wed Sep 7 12:17:44 2011                            Terry Shuck wrote:                                            Anyway if I have to wipe out ELOG and start over to have admin capabilities again, do all of my logbooks             Re: Password may not contain blanks, posted by Stefan Ritt on Wed Sep 7 12:37:38 2011                            Terry Shuck wrote:                                            Can you tell me how to stop elogd? I've edited that file several times however when I open ELOG in my          Re: Password may not contain blanks, posted by Andreas Luedeke on Tue Sep 6 12:15:54 2011                            Stefan Ritt wrote:                                                                      Re: Password may not contain blanks, posted by Terry Shuck on Wed Sep 7 16:23:01 2011                            Andreas Luedeke wrote:                                     Attachments (again), posted by David Pilgram on Wed Aug 31 14:00:17 2011  OK, so no-one has ideas as per my question in elog:67088. Looking at the issue from another angle.       Re: Attachments (again), posted by Andreas Luedeke on Wed Aug 31 15:00:11 2011  > In my case the original .pdf file is elsewhere, I've no need to have duplicates scatted in various logbooks, and > while ideally that would also be true of the thumbnail, it is fair enough for this to be stored in each logbook > where it is required.  This removes the issue of how to have an attachment in a different logbook (other than by > links, which would get rather tiresome to have to keep making). > >          Re: Attachments (again), posted by Stefan Ritt on Wed Aug 31 15:13:02 2011                            Andreas Luedeke wrote:                                            > In my case the original .pdf file is elsewhere, I've no need to have duplicates scatted in various             Re: Attachments (again), posted by David Pilgram on Wed Aug 31 15:29:32 2011  Hi Stefan, >Sure, but that works only from a hidden logbook into a public one, not the other way, but I think this is what          Re: Attachments (again), posted by David Pilgram on Wed Aug 31 15:20:48 2011  Hi Andreas, >Of course the attachment has to be in the public logbook and the link in the hidden one.             Re: Attachments (again), posted by Andreas Luedeke on Tue Sep 6 12:00:13 2011  > I wondered if there had been some flag for the config file whereby the original file for attachment was > processed by ImageMagick, but not stored, only the .png file(s) stored - or rather, some other way that achieved > the same end. as there is no such flag at present.                Re: Attachments (again), posted by David Pilgram on Tue Sep 6 12:39:39 2011  > > I wondered if there had been some flag for the config file whereby the original file for attachment was > > processed by ImageMagick, but not stored, only the .png file(s) stored - or rather, some other way that achieved > > the same end. as there is no such flag at present.   SEGV after upgrade from 2.7.8 to 2.9.0, posted by Kester Habermann on Mon Aug 15 11:36:02 2011  Hello, We've been using ELOG 2.6.5 to 2.7.8 for 4 years without any major problems. Recently we upgraded to version 2.9.0 and since we've had the daemon frequently crash with SEGV.   Hyperlinking address to Google Maps, posted by Alan Grant on Tue Aug 2 22:58:37 2011  I have a street address attribute called Ticket Location which I would like to hyperlink to google maps so I can see a map representation of the actual value. For example, the value "654 Pembina" on the List page shoud be inserted into the url such that it  displays http://maps.google.com/?q=654 Pembina, winnipeg when the browser window opens. This url works       Re: Hyperlinking address to Google Maps, posted by Alan Grant on Wed Aug 3 17:55:41 2011                            Alan Grant wrote:                                          Elog client usage, posted by Alan Grant on Fri Jul 22 00:05:02 2011  I have searched the Elog forum and docs at length for actual examples of how to use the Elog client and I apologize if I missed it somehwere but could someone please provide some actual examples of how the parmeters are used? I haven't had much success setting it up just going by the Elog command syntax quide.       Re: Elog client usage, posted by Andreas Luedeke on Fri Jul 22 10:31:27 2011                            Alan Grant wrote:                                            I have searched the Elog forum and docs at length for actual examples of how to use the Elog          Re: Elog client usage, posted by Alan Grant on Tue Jul 26 21:50:05 2011                            Andreas Luedeke wrote:                                               Re: Elog client usage, posted by Andreas Luedeke on Wed Jul 27 04:36:40 2011                            Alan Grant wrote:                                                                            Re: Elog client usage, posted by Alan Grant on Tue Aug 2 21:36:20 2011                            Andreas Luedeke wrote:                                     present Text, posted by Juergen Lupke on Tue Aug 2 13:55:06 2011  I have define a MOption  BACKUP = Server, Switch, Router any now i link to use the Status of the Backup Option to display diffrent html file in the Text field, i the a posible way to do this ? sample:   List page displays internal 'Text' attribute header with some alias, posted by Zbigniew Reszela on Wed Jul 20 16:52:06 2011  I would like to have different header for 'Text' internal attribute: e.g. an alias "Notes". So on the list page header of Text attribute column is Notes. Is it already possible? I couldn't find it in Administrator's Guide.        Re: List page displays internal 'Text' attribute header with some alias, posted by Stefan Ritt on Wed Jul 20 17:39:25 2011                            Zbigniew Reszela wrote:                                            I would like to have different header for 'Text' internal attribute: e.g. an alias "Notes".   changing raw style when empty attribute value, posted by Zbigniew Reszela on Thu Jul 14 19:53:13 2011  Dear all, I wonder if anyone of you already tried to  change raw style in case of empty attribute value. In my configuration file I have defined attribute "End date" (without quotation marks) and it's type is datetime.       Re: changing raw style when empty attribute value, posted by Stefan Ritt on Wed Jul 20 13:50:34 2011                            Zbigniew Reszela wrote:                                            Dear all,          Re: changing raw style when empty attribute value, posted by Zbigniew Reszela on Wed Jul 20 17:38:16 2011                            Stefan Ritt wrote:                                                            Attachments in a different logbook to the entry logbook, posted by David Pilgram on Wed Jul 6 12:45:19 2011  Is it possible to have an attachment to an entry in a different directory to the working directory of the logbook being used? By which I mean, if you have in logbook hidden the attachment files    ELOG deamon stuck in find_thread_head(), posted by soren poulsen on Sat Apr 30 19:45:30 2011  ELOG seems to enter a loop when you do certain opeations on certain messages: I moved a message to a different logbook and the deamon just gets stuck. If I restart the daemon, the message was in fact moved: I can move it back to its original destination without problems.       Re: ELOG deamon stuck in find_thread_head(), posted by Soren Poulsen on Tue May 3 17:35:57 2011                            soren poulsen wrote:                                            ELOG seems to enter a loop when you do certain opeations on certain messages: I moved a message to          Re: ELOG deamon stuck in find_thread_head(), posted by Soren Poulsen on Wed Jul 6 12:06:01 2011                            Soren Poulsen wrote:                                                 Re: ELOG deamon stuck in find_thread_head(), posted by David Pilgram on Wed Jul 6 12:36:33 2011                            Soren Poulsen wrote:                                                            segmentation fault when "restrict edit" is used and "new" is allowed for anonymous users, posted by Andreas Luedeke on Mon Jun 20 05:31:31 2011  The simple config file below produces a segmentation fault when elogd is started, http://localhost/Test/?cmd=New is opened in the browser and then e.g. "Entry" is switched to "Problem".       Re: segmentation fault when "restrict edit" is used and "new" is allowed for anonymous users, posted by Stefan Ritt on Mon Jun 20 17:53:58 2011  You are the first one allowing guests to enter new entries, so this probes a code path which was never used before. I fixed the crash in SVN revision 2416, but it might be that there are more issues with that. Just keep reporting.   Format in "Thread display", posted by Eoin Butler on Sat Jun 18 20:29:25 2011  Is is possible to add formatting (such as <b> tags, etc..) to the "thread display" option?   Integrate Latex Formula Editor plugin, posted by Andreas Luedeke on Wed Jun 15 11:10:01 2011  There is a nice js plugin to create formulas with a latex editor. This plugin (Can be found at http://www.codecogs.com/latex/integration/ckeditor/install.php) is for the CK Editor. Currently the FCK Editor is used, which has been superseded in 2009 by the CK Editor.   elogd crashes when running mirror cron with SSL and KRB5, posted by Andreas Luedeke on Mon May 30 12:28:53 2011  When I run a mirror server and both logbooks using SSL/KRB5 then the cron job causes a segmentation fault. I haven't tried to check it with a simple configuration yet.       Re: elogd crashes when running mirror cron with SSL and KRB5, posted by Andreas Luedeke on Fri Jun 3 12:06:20 2011  > When I run a mirror server and both logbooks using SSL/KRB5 then the cron job causes a segmentation fault. >  > I haven't tried to check it with a simple configuration yet.   Is there maximum number of entries?, posted by Hung Dao on Tue May 31 17:38:57 2011  Does anyone know whether ELOG has limit number of entries or it can create new entries as many as it can go?  Thanks.       Re: Is there maximum number of entries?, posted by Stefan Ritt on Thu Jun 2 21:28:19 2011                            Hung Dao wrote:                                            Does anyone know whether ELOG has limit number of entries or it can create new entries as many as it   editor dosn't work, posted by Sara Vanini on Thu Jun 2 12:52:10 2011  Hi,  when I try to edit an entry of my ELOG, the display shows the editor window blank, without all the previous content of the entry, and it is not possibile to write in it. It worked since yesterday, when ELOG tried to save a new entry but the disk was full. ELOG was srewed up. I deleted the buggy       Re: editor dosn't work, posted by David Pilgram on Thu Jun 2 14:57:39 2011                            Sara Vanini wrote:                                            Hi,          Re: editor dosn't work, posted by Sara Vanini on Thu Jun 2 16:50:17 2011                            David Pilgram wrote:                                                                      Re: editor dosn't work, posted by David Pilgram on Thu Jun 2 20:20:19 2011                            Sara Vanini wrote:                                                            HELP - URGENT - odd ELOG behaviour, posted by Sara Vanini on Wed Jun 1 15:05:59 2011          Re: HELP - URGENT - odd ELOG behaviour, posted by Sara Vanini on Wed Jun 1 15:15:40 2011  PS: maybe this dump could give a clue..... what's the directory of  size 12288  .           Re: HELP - URGENT - odd ELOG behaviour, posted by Louis de Leseleuc on Wed Jun 1 18:17:36 2011                            Sara Vanini wrote:                                            PS: maybe this dump could give a clue..... what's the directory of  size   Find page resets quick filters if fields with user defined (drop-down)lists are selected., posted by Peter de Mol on Tue May 31 13:48:41 2011   Hi Stefan, First : Compliments with your fine application ! The issue : A user wants to search the database. He selects one of the quick filters (e.g. "Show Last / Month"). Next he fills in the   my_shell (OS_UNIX) uses /tmp/elog_shell - conflict when more than one elogd runs at the same time, posted by John M O'Donnell on Fri May 20 22:45:00 2011  all instances of elogd use the same file name in /tmp when calling my_shell.  This can cause some inconsistent behavior when two or more copies of elogd are runnnig at the same time.  (eg. one might detect ImageMagik is installed, and the other not,)     Self Register = 3 doesn't work any longer, posted by Olivier Callot on Wed Apr 13 10:51:34 2011  With the recent Elog 2.9.0 rev 2412 the Self Register = 3 option doesn't work as expected: The user is immediately allowed to login. This is not what this option was doing, which is to wait for an approval by the administrator. Can this behaviour be restored, or should I change the value of the Self Register flag? Thanks       Re: Self Register = 3 doesn't work any longer, posted by Stefan Ritt on Fri Apr 15 08:37:21 2011                            Olivier Callot wrote:                                            With the recent Elog 2.9.0 rev 2412 the Self Register = 3 option doesn't work as expected: The user          Re: Self Register = 3 doesn't work any longer, posted by Olivier Callot on Fri Apr 15 11:49:43 2011                            Stefan Ritt wrote:                                                   Re: Self Register = 3 doesn't work any longer, posted by Stefan Ritt on Fri Apr 15 12:02:50 2011                            Olivier Callot wrote:                                                             Re: Self Register = 3 doesn't work any longer, posted by Olivier Callot on Tue May 17 13:19:03 2011                            Stefan Ritt wrote:                                                         Re: Self Register = 3 doesn't work any longer, posted by Stefan Ritt on Tue May 17 16:37:42 2011                            Olivier Callot wrote:                                            Dear Stefan, after a long time I managed to get a test setup. The line that creates the misbehaviour                      Re: Self Register = 3 doesn't work any longer, posted by Olivier Callot on Tue May 17 17:00:03 2011                            Stefan Ritt wrote:                                         elog 2.8.0 as daemon crashes when editing selected threaded list, posted by Mark Bergman on Tue Sep 14 01:15:22 2010  I recently upgraded elog from 2.7.8 to 2.8.0 (and moved servers, removed unused logbooks, etc.). I'm now having a problem where elog consistently crashes when attempting to edit multiple entries. This is a very common use case, as we use a "status" field, set to "open" or "closed" to track problems. When a problem is resolved, we will go to the "list" display, set it to "threaded", "select" the thread,       Re: elog 2.8.0 as daemon crashes when editing selected threaded list, posted by Stefan Ritt on Wed Sep 22 14:21:50 2010                            Mark Bergman wrote:                                            I recently upgraded elog from 2.7.8 to 2.8.0 (and moved servers, removed unused logbooks, etc.). I'm       Re: elog 2.8.0 as daemon crashes when editing selected threaded list, posted by Mark Bergman on Thu Apr 21 21:06:20 2011                            Mark Bergman wrote:                                            I recently upgraded elog from 2.7.8 to 2.8.0 (and moved servers, removed unused logbooks, etc.). I'm now having a problem          Re: elog 2.8.0 as daemon crashes when editing selected threaded list, posted by Ryan on Sun May 8 22:33:15 2011                            Mark Bergman wrote:                                        Unwanted faux DST date shifts to time stamps in mirror transactions, posted by Andreas Warburton on Tue May 3 20:05:29 2011   Hi, I have a MacOSX 10.6.7 laptop that periodically synchronizes my logbook with that on a Debian linux web server.  Both instances of ELOG are 2.9.0-2396.   Upgrading to 2.9, posted by Maureen Kular on Mon May 2 22:39:24 2011  I am in the process of upgrading from 2.6.0 to 2.9.0.  I am installing it on a windows 2008 r2 server which is 64 bit.  I am having a few issues and am just wondering if Windows 2008 R2 is support with version 2.9.0.  Is there anything I need to know about the installation other than just run the exe file?  So far I have run the exe file and installed the software, the service is running, however I cannot get into the application.        Re: Upgrading to 2.9, posted by Pelle on Tue May 3 08:22:18 2011                            Maureen Kular wrote:                                            I am in the process of upgrading from 2.6.0 to 2.9.0.  I am installing it on a windows 2008   Upgrading to 2.9, posted by Maureen Kular on Mon May 2 22:39:23 2011  I am in the process of upgrading from 2.6.0 to 2.9.0.  I am installing it on a windows 2008 r2 server which is 64 bit.  I am having a few issues and am just wondering if Windows 2008 R2 is support with version 2.9.0.  Is there anything I need to know about the installation other than just run the exe file?  So far I have run the exe file and installed the software, the service is running, however I cannot get into the application.    Filter on attribute value for list items, posted by Wolfgang Bayer on Fri Apr 29 11:20:50 2011  Hello @all, for a logbook I have also to set up a guest access. As I want to have a login page first opening the logbook,  I created a second logbook entry in the elog.cfg that points to the same subdir as the original logbook. The idea of this guest access is, that users who have no login rights can   Hyphens in email addresses, posted by Ben Shepherd on Thu Apr 28 09:27:52 2011  Hi, I have a user on our system who keeps getting shut out - she can register, but after a few days her login always stops working. The only thing that I can see that's different about her is that her email address has a hyphen in it (firstname.last-name@stfc.ac.uk). I have tried registering myself   elog2sql - a script to convert elog logbooks to a MySQL database, posted by Fred Hooper on Thu Jul 3 07:25:49 2003  Announcing:  elog2sql elog2sql was created to help translate logbooks created by the program       Re: elog2sql - a script to convert elog logbooks to a MySQL database, posted by Pelle on Sat Apr 23 08:56:26 2011  I know this thread was started 2003 but if anyone have this MySQL export script please attach it to this thread.          Re: elog2sql - a script to convert elog logbooks to a MySQL database, posted by Pelle on Sat Apr 23 14:32:38 2011  >  > I know this thread was started 2003 but if anyone have this MySQL export script please attach it to this thread. >  > Thanks, >  > Pelle     Automatic Copy to , posted by Chris Warner on Fri Jan 13 13:16:25 2006  Is it possible to configure elog to copy a new entry from 1 logbook to another?       Re: Automatic Copy to , posted by Stefan Ritt on Wed Jan 18 12:33:00 2006  [quote="Chris Warner"]Is it possible to configure elog to copy a new entry from 1 logbook to another?[/quote] No, you have to copy entries manually with the "Copy to" menu command. For that, you have to put something like          Re: Automatic Copy to , posted by Grant Jeffcote on Sun Aug 31 14:43:19 2008  Stefan, Is there any way I might be able to initiate the 'copy to' function by selecting a 'tick box' (boolean) or conditional attribute choice in an entry page             Re: Automatic Copy to , posted by Stefan Ritt on Mon Sep 1 13:54:53 2008  [quote="Grant Jeffcote"]Stefan, Is there any way I might be able to initiate the 'copy to' function by selecting a 'tick box' (boolean) or conditional attribute choice in an entry page                Re: Automatic Copy to , posted by Grant Jeffcote on Sat Sep 6 20:01:21 2008  [quote="Stefan Ritt"][quote="Grant Jeffcote"]Stefan, Is there any way I might be able to initiate the 'copy to' function by selecting a 'tick box' (boolean) or conditional attribute choice in an entry page                   Re: Automatic Copy to , posted by Pelle on Fri Apr 22 00:56:43 2011  [quote="Grant Jeffcote"][quote="Stefan Ritt"][quote="Grant Jeffcote"]Stefan, Is there any way I might be able to initiate the 'copy to' function by selecting a 'tick box' (boolean) or conditional attribute choice in an entry page   Elog 2.9.0 buffer overflow crash bug ubuntu linux, posted by John Rouillard on Sun Apr 10 01:49:01 2011  When running openvas (a nessus fork) against elog 2.9.0 I provoked the following crash: Apr  9 17:32:06 unixland elogd[1300]: POST / HTTP/1.0#015#012Host: unixland.home       Re: Elog 2.9.0 buffer overflow crash bug ubuntu linux, posted by Stefan Ritt on Fri Apr 15 08:49:26 2011  > When running openvas (a nessus fork) against elog 2.9.0 I provoked the following crash: >  > Apr  9 17:32:06 unixland elogd[1300]: POST / HTTP/1.0#015#012Host: unixland.home   Authentication error message, posted by soren poulsen on Tue Mar 15 17:37:19 2011  It is very good to have Kerberos authentication available. It is just the error message which is a bit cryptic. If you enter your Kerberos password once, and later fail to authenticate with a wrong password, you get: Kerberos error:       Re: Authentication error message, posted by Stefan Ritt on Fri Apr 1 16:13:44 2011                            soren poulsen wrote:                                            It is very good to have Kerberos authentication available. It is just the error message which is a bit          Re: Authentication error message, posted by soren poulsen on Mon Apr 11 19:31:23 2011                            Stefan Ritt wrote:                                                                           Creating a form or table, posted by Terry Shuck on Thu Mar 24 16:37:55 2011  Is there a way to open a form or table when clicking on New rather than going to a text field? Thanks, TS!         Re: Creating a form or table, posted by Stefan Ritt on Fri Apr 1 10:45:17 2011                            Terry Shuck wrote:                                            Is there a way to open a form or table when clicking on New rather than going to a text field? Thanks,       Re: Creating a form or table, posted by Andreas Luedeke on Fri Apr 1 14:15:45 2011                            Terry Shuck wrote:                                            Is there a way to open a form or table when clicking on New rather than going to a text field? Thanks,          Re: Creating a form or table, posted by Terry Shuck on Thu Apr 7 18:28:42 2011                            Andreas Luedeke wrote:                                               Re: Creating a form or table, posted by Stefan Ritt on Fri Apr 8 15:31:50 2011                            Terry Shuck wrote:                                                                         Re: Creating a form or table, posted by Terry Shuck on Mon Apr 11 17:31:21 2011                            Stefan Ritt wrote:                                         Mail are no longer sent from the logged in user in 2.9.0, posted by Olivier Callot on Wed Mar 23 10:01:01 2011  We upgraded to Elog 2.9.0-2402 and since then mails sent by Elog when posting an item are from the default account, not from the logged in user's mail address. The configuration is, for the mail part :       Re: Mail are no longer sent from the logged in user in 2.9.0, posted by Stefan Ritt on Fri Apr 1 10:54:29 2011                            Olivier Callot wrote:                                            We upgraded to Elog 2.9.0-2402 and since then mails sent by Elog when posting an item are from the default   Why the password file can have several same username?, posted by Ma Qiumei on Wed Mar 30 10:46:58 2011   In the password file, I see several same username, such as: <user>     <name>test</name>       Re: Why the password file can have several same username?, posted by Stefan Ritt on Fri Apr 1 09:17:20 2011                            Ma Qiumei wrote:                                            I don't know the reason why eLog can have the same username.   Attributes for message workflow., posted by Ryan on Thu Mar 24 17:23:37 2011  I am attempting to setup an ECR (Engineering Change Review/Request) process in ELOG. I have a logbook setup so that an original request is submitted with a status of "Approval Pending"       Re: Attributes for message workflow., posted by Andreas Luedeke on Wed Mar 30 13:46:01 2011                            Ryan wrote:                                            [...]  I am even open to losing the historical "status" and beeing able to change all entries   Cleaning up attachments, posted by Louis de Leseleuc on Tue Mar 15 21:38:01 2011  I noticed a behavior that might be irritating.  After attaching/uploading files to an entry and before submitting it, one might press 'Back' or close the browser window. This in effect cancels the entry and sends into oblivion. HOWEVER the attachments and their thumbnail files remain on the server forever.       Re: Cleaning up attachments, posted by Stefan Ritt on Fri Mar 18 11:07:50 2011                            Louis de Leseleuc wrote:                                            I noticed a behavior that might be irritating.           Re: Cleaning up attachments, posted by Louis de Leseleuc on Mon Mar 21 17:42:15 2011                            Stefan Ritt wrote:                                                            http://midas.psi.ch/elog/download/windows/ doesn't have the latest 2.90 release, posted by John Rouillard on Mon Mar 21 02:40:31 2011  It looks like the newest windows release of elog at http://midas.psi.ch/elog/download/windows/ is 2.81.       Re: http://midas.psi.ch/elog/download/windows/ doesn't have the latest 2.90 release, posted by Stefan Ritt on Mon Mar 21 08:53:48 2011  > It looks like the newest windows release of elog at > http://midas.psi.ch/elog/download/windows/ is 2.81. >    password problem, posted by Ken on Fri Mar 4 20:07:30 2011  I moved my elog install to a new box on short notice due to an emergency, everything works but none of the passwords are recognized, and are not using what it set in elogd.cfg.  any ideas ?       Re: password problem, posted by Stefan Ritt on Mon Mar 7 16:19:35 2011                            Ken wrote:                                           I moved my elog install to a new box on short notice due to an emergency, everything works but none of the passwords are recognized, and   Filter on Options, posted by Cossutta L on Thu Feb 24 11:47:07 2011  I want to implement the following feature in my logbook: selecting an Option related to a specific Attribute produces a filter on the Options related to the other Attributes. -----       Re: Filter on Options, posted by Stefan Ritt on Thu Feb 24 11:54:18 2011                            Cossutta L wrote:                                            I want to implement the following feature in my logbook:          Re: Filter on Options, posted by Cossutta L on Fri Feb 25 15:01:12 2011                            Stefan Ritt wrote:                                                            Windows 7 and entry storage, posted by Greg Damhorst on Mon Feb 14 23:59:20 2011  I have been playing with Elog on windows 7.  I want to set up an elog that can be accessed from our local network, and I discovered that can be done by running the server on windows and entering the host machine's computer-name:8080 in a browser on any machine on the network. I had the server registered as a windows service, but oddly, when I re-booted the server didn't seem to be running (problem #1).       Re: Windows 7 and entry storage, posted by Stefan Ritt on Mon Feb 21 09:05:05 2011                            Greg Damhorst wrote:                                            I have been playing with Elog on windows 7.  I want to set up an elog that can be accessed from   Edit Mode - Icons, posted by Behdad D on Wed Jan 26 11:33:51 2011   Hi all,   Is there a way to add more icons to the currently available icons when you are in the edit mode. For example instead of having this        Re: Edit Mode - Icons, posted by Stefan Ritt on Mon Feb 7 08:46:23 2011                            Behdad D wrote:                                             Hi all,          Re: Edit Mode - Icons, posted by Behdad D on Wed Feb 9 08:59:40 2011                            Stefan Ritt wrote:                                                                      Re: Edit Mode - Icons, posted by Stefan Ritt on Wed Feb 9 09:03:25 2011                            Behdad D wrote:                                                                         Re: Edit Mode - Icons, posted by Behdad D on Wed Feb 9 13:04:56 2011                            Stefan Ritt wrote:                                                                            Re: Edit Mode - Icons, posted by Behdad D on Wed Feb 9 13:12:13 2011                            Behdad D wrote:                                                            Odd bug with conditional and required attributes, posted by T. Ribbrock on Fri Feb 4 23:48:54 2011  I just ran into an odd bug with conditional attributes: If I add a certain attribute to "Required Attributes", none of the conditionals will work anymore. I have tried to create a small logbook definition that will demonstrate the problem (the original logbook is more complex and uses two sets of conditionals, both of which will be disabled when the bug hits):       Re: Odd bug with conditional and required attributes, posted by Stefan Ritt on Mon Feb 7 15:14:36 2011                            T. Ribbrock wrote:                                            I just ran into an odd bug with conditional attributes: If I add a certain attribute to "Required          Re: Odd bug with conditional and required attributes, posted by T. Ribbrock on Mon Feb 7 17:26:26 2011                            Stefan Ritt wrote:                                                Fckedit and quotation style sheets, posted by Robert Heine on Wed Feb 2 15:26:53 2011  Dear colleagues, I have edited my own style sheets for elog, but if I use the reply function while having fckedit as editor, the quotations have the standard elog colors, not mine. With elog's own editor, I get my colors. I figured out that fckedit inserts the quote as HTML-block with "hard coded" colors,       Re: Fckedit and quotation style sheets, posted by Stefan Ritt on Mon Feb 7 16:44:54 2011                            Robert Heine wrote:                                            Dear colleagues,   Strange problem with dates - need debugging help, posted by T. Ribbrock on Fri Feb 4 00:11:09 2011  I have just installed elog 2.8.1 on my OpenBSD 4.8 server (I've added the necessary Makefile patch to "Contributions"). Everything seems to work fine, however, I ran into a very odd problems with the dates of the logbook entries: When I start a new entry, the current date/time is displayed correctly. When I submit the entry and look at it again, the date has changed to some value in 1996        Re: Strange problem with dates - need debugging help, posted by Stefan Ritt on Fri Feb 4 10:20:12 2011                            T. Ribbrock wrote:                                            I have just installed elog 2.8.1 on my OpenBSD 4.8 server (I've added the necessary Makefile patch to          Re: Strange problem with dates - need debugging help, posted by T. Ribbrock on Fri Feb 4 11:52:45 2011                            Stefan Ritt wrote:                                            The problem is most probably related to the time zone. elogd contains a function:   Error Message in "Demo of database-like elog", posted by mike cianci on Thu Apr 9 12:50:03 2009  I attempted to remove the text editor (like you did in "Demo of database-like elog") using  "Show text = 0". In both your Demo and my logbook when you hit  "New"  - Explorer generates the folowing error message         Error: The Textarea with id or name set to "text" was not found.       Re: Error Message in "Demo of database-like elog", posted by Stefan Ritt on Thu Apr 9 13:04:51 2009                              mike cianci wrote:                                         Re: Error Message in "Demo of database-like elog", posted by Robert Heine on Thu Aug 26 11:27:08 2010                            Stefan Ritt wrote:                                                          Re: Error Message in "Demo of database-like elog", posted by Stefan Ritt on Wed Sep 22 14:30:53 2010                            Robert Heine wrote:                                                                         Re: Error Message in "Demo of database-like elog", posted by Robert Heine on Wed Feb 2 14:04:19 2011                            Stefan Ritt wrote:                                                            Working Ubuntu 10.10 ELOG binaries, posted by Louis de Leseleuc on Wed Jan 26 19:35:48 2011   Hello, Can anyone please send me, or publicly provide, working Ubuntu 10.10 binaries (64-bit) for ELOG? I have compiled and installed the program. While the core functionalities are OK, I have run into irritating bugs in filtering and config editing       Re: Working Ubuntu 10.10 ELOG binaries, posted by Louis de Leseleuc on Wed Jan 26 19:38:58 2011                            Louis de Leseleuc wrote:                                             Hello,   Wishlist: Roption, posted by David Pilgram on Thu Jan 20 18:51:53 2011  Hi Stefan, Roptions, or Radio Buttons.  Do you recall that on old       Re: Wishlist: Roption, posted by Stefan Ritt on Fri Jan 21 08:49:31 2011  > I'd like this same facility with elog.  Now I know that it can be > done by (for example) in the config file preselecting one of the > selections on reply- or indeed one that does not exist to "clear" it,           Re: Wishlist: Roption, posted by David Pilgram on Fri Jan 21 11:28:02 2011  > > I'd like this same facility with elog.  Now I know that it can be > > done by (for example) in the config file preselecting one of the > > selections on reply- or indeed one that does not exist to "clear" it,    Modification aren't accepted, posted by bob on Wed Jan 19 16:03:38 2011  hello, At home, when I change the config *. cfg, the modifications are not taken in consideration Have you got a idea ?       Re: Modification aren't accepted, posted by Stefan Ritt on Wed Jan 19 16:10:58 2011                            bob wrote:                                           hello,          Re: Modification aren't accepted, posted by bob on Wed Jan 19 16:19:56 2011                            Stefan Ritt wrote:                                                                      Re: Modification aren't accepted, posted by David Pilgram on Wed Jan 19 18:19:49 2011                            bob wrote:                                                                         Re: Modification aren't accepted, posted by Stefan Ritt on Thu Jan 20 08:51:13 2011                            David Pilgram wrote:                                                                Re: Modification aren't accepted, posted by bob on Thu Jan 20 13:49:22 2011                            Stefan Ritt wrote:                                                                                  Re: Modification aren't accepted, posted by Stefan Ritt on Thu Jan 20 13:52:04 2011                            bob wrote:                                               New entries are not visible from other logbooks based on the same logbook dir through Subdir, posted by JacekK on Fri Jan 14 00:07:01 2011  Hi, I have two logbooks based on the same data directory through "Subdir" option and when I add new     entry in one logbook, then that entry is not visible in other logbook.       Re: New entries are not visible from other logbooks based on the same logbook dir through Subdir, posted by Stefan Ritt on Thu Jan 20 08:52:43 2011                            JacekK wrote:                                           Hi,   elog command creates always UTF-8 encoded entries, posted by Andreas Luedeke on Wed Jan 19 13:30:48 2011  If I create an entry via the web-interface, the defined encoding of the browser is used. If I create an entry via "elog", it is always stored in UTF-8 encoding. For the text I can overcome that with HTML encoding, but for attribute values the encoding does not show properly.       Re: elog command creates always UTF-8 encoded entries, posted by Stefan Ritt on Wed Jan 19 14:47:15 2011  > If I create an entry via the web-interface, the defined encoding of the browser is used. > If I create an entry via "elog", it is always stored in UTF-8 encoding. > For the text I can overcome that with HTML encoding, but for attribute values the encoding does not show properly.   Quick Filter does not work, posted by Michael Dannmeyer on Mon Jan 17 17:24:35 2011  Hello, i have a logbook with the following parameters for the Attribute "Typ": [TEST1]       Re: Quick Filter does not work, posted by Stefan Ritt on Wed Jan 19 08:44:28 2011                            Michael Dannmeyer wrote:                                            Hello,          Re: Quick Filter does not work, posted by Michael Dannmeyer on Wed Jan 19 09:19:53 2011                            Stefan Ritt wrote:                                         Found some spelling errors in eloglang.german, posted by Andreas Luedeke on Thu Jan 13 10:07:17 2011  corrected file is attached   Multiple Insances of eLog on the same machine, posted by Behdad D on Fri Jan 7 05:45:41 2011  Hello, Is it possible to run multiple instance of elog on the same windows box where each instance listens on a different port? Thanks.       Re: Multiple Insances of eLog on the same machine, posted by Stefan Ritt on Fri Jan 7 08:37:49 2011                            Behdad D wrote:                                            Hello,          Re: Multiple Insances of eLog on the same machine, posted by Behdad D on Sun Jan 9 07:04:00 2011                            Stefan Ritt wrote:                                                            how to retrieve attachment on execute new, posted by Zbigniew Reszela on Tue Dec 14 10:37:41 2010  Hello all, I have a problem with retrieving attachments of an entry on "Execute new" command. In the syntax of elodg.cfg it is: In         addition the list of all attachments can be referred to via         $<attachment>. Could anyone explain it a little bit more explicit,       Re: how to retrieve attachment on execute new, posted by Zbigniew Reszela on Tue Dec 14 18:43:38 2010                            Zbigniew Reszela wrote:                                            Hello all,          Re: how to retrieve attachment on execute new, posted by Stefan Ritt on Wed Dec 15 08:49:30 2010                            Zbigniew Reszela wrote:                                                                      Re: how to retrieve attachment on execute new, posted by Zbigniew Reszela on Thu Dec 16 19:20:20 2010                            Stefan Ritt wrote:                                                                         Re: how to retrieve attachment on execute new, posted by Stefan Ritt on Thu Dec 23 10:42:05 2010                            Zbigniew Reszela wrote:                                               elog as a service in windows not detect Imagemagick, posted by Diego Obradors Campos on Mon Dec 13 20:59:07 2010  I have installed elog 2.8 in a windows pc with the installer from the distribution, it  installs elog as a windows service, which is started automatically when  windows starts. It is done as:       Re: elog as a service in windows not detect Imagemagick, posted by Stefan Ritt on Wed Dec 15 16:42:32 2010                            Diego Obradors Campos wrote:                                            I have installed elog 2.8 in a windows pc with the installer from the distribution, it  installs elog   How can Elog start automatically on Windows Server 2008 on startup ?, posted by Philipp W. on Fri Dec 3 13:56:20 2010   Hi all, i have a question... How can i manage it that elog starts automatically on windows startup ? I  always need to type "elogd -p 85" in the console that it starts ...       Re: How can Elog start automatically on Windows Server 2008 on startup ?, posted by Stefan Ritt on Tue Dec 7 09:38:56 2010                            Philipp W. wrote:                                             Hi all,          Re: How can Elog start automatically on Windows Server 2008 on startup ?, posted by Arno Teunisse on Tue Dec 14 20:16:46 2010                            Stefan Ritt wrote:                                         Adding attachment to an existing entry, posted by Mariusz Stakowski on Thu Dec 2 10:15:26 2010  Hello, I have a problem when I try to edit an existing entry. I want to add an attachment. I can upload an attachment to the existing entry, but submitting it does not seem to work. The  added attachment is not visible. But it exists in logbook directory. The only way I found to add it, is to use "Resubmit       Re: Adding attachment to an existing entry, posted by Stefan Ritt on Fri Dec 3 16:48:26 2010                            Mariusz Stakowski wrote:                                            Hello,          Re: Adding attachment to an existing entry, posted by Mariusz Stakowski on Mon Dec 6 10:06:54 2010                            Stefan Ritt wrote:                                                                      Re: Adding attachment to an existing entry, posted by Stefan Ritt on Mon Dec 6 12:40:31 2010                            Mariusz Stakowski wrote:                                                                         Re: Adding attachment to an existing entry, posted by Mariusz Stakowski on Mon Dec 6 16:43:29 2010                            Stefan Ritt wrote:                                                                                    Re: Adding attachment to an existing entry, posted by Stefan Ritt on Tue Dec 7 09:40:19 2010                            Stefan Ritt wrote:                                                New password file problem, posted by Mariusz Stakowski on Wed Nov 24 15:06:31 2010  Hello, I'm new to elog. I've installed it under Slackware 11. Everything worked smoothly until I wanted to establish access control. I followed the steps described under Access control heading in Syntax of elog.cfg chapter. I specified a new password file name and the following steps with no problem. After       Re: New password file problem, posted by Stefan Ritt on Wed Nov 24 15:14:29 2010                            Mariusz Stakowski wrote:                                            Hello,          Re: New password file problem, posted by Mariusz Stakowski on Wed Dec 1 17:03:01 2010                            Stefan Ritt wrote:                                                            Action after message submission, posted by Mike Zuber on Wed Sep 15 22:40:52 2010  Is it possible to automatically go back to the list view in summary mode after submitting a new message instead of displaying the new message? I know it's possible to display a page from a file after submitting a new message  by using "Submit Page = <file>".        Re: Action after message submission, posted by Stefan Ritt on Fri Sep 17 00:59:16 2010                            Mike Zuber wrote:                                            Is it possible to automatically go back to the list view in summary mode after submitting a new message          Re: Action after message submission, posted by Mike Zuber on Thu Oct 14 16:43:05 2010                            Stefan Ritt wrote:                                                         Re: Action after message submission, posted by Mike Zuber on Tue Nov 30 19:30:31 2010                            Stefan Ritt wrote:                                                  New User in Config Menu ?, posted by Christoph Kukulies on Fri Nov 26 12:31:42 2010  I see only Save Back Change Password Remove User in Config Menu. How can I create a New User? [global]       Re: New User in Config Menu ?, posted by Stefan Ritt on Fri Nov 26 12:36:53 2010                            Christoph Kukulies wrote:                                            I see only Save Back Change Password Remove User in Config Menu.          Re: New User in Config Menu ?, posted by Christoph Kukulies on Fri Nov 26 16:22:05 2010                            Stefan Ritt wrote:                                                               Don't see login page - Self register = 1, posted by Christoph Kukulies on Wed Nov 24 10:40:41 2010  Hi, I'm trying to configure Elog such that users can self-register. But no luck so far.       Re: Don't see login page - Self register = 1, posted by Stefan Ritt on Wed Nov 24 11:58:00 2010  > Hi, >  > I'm trying to configure Elog such that users can self-register. But no luck so far.          Re: Don't see login page - Self register = 1, posted by Christoph Kukulies on Wed Nov 24 16:36:21 2010  > > Hi, > >  > > I'm trying to configure Elog such that users can self-register. But no luck so far.             Re: Don't see login page - Self register = 1, posted by Yoshio Imai on Thu Nov 25 14:15:31 2010  Hi! [quote=Christoph Kukulies]I cannot get the login screen. I'm connecting to a logbook (and I can do this without logging in).                Re: Don't see login page - Self register = 1, posted by Christoph Kukulies on Thu Nov 25 17:34:28 2010  [quote="Yoshio Imai"]Hi! [quote=Christoph Kukulies]I cannot get the login screen. I'm connecting to a logbook (and I can do this without logging in).                   Re: Don't see login page - Self register = 1, posted by Stefan Ritt on Fri Nov 26 09:44:22 2010  [quote="Christoph Kukulies"]I only need to know how I get an admin passwd and user into the passwd file. elogd -a password -l logbook does not have the desired effect. It spoils the cfg-file again with Admin Password commands.[/quote]                   Re: Don't see login page - Self register = 1, posted by Yoshio Imai on Fri Nov 26 11:42:50 2010  [quote="Christoph Kukulies"]I only need to know how I get an admin passwd and user into the passwd file.[/quote] You do this the same way as a regular user: use the self registration feature to create a user, and then declare this user to be the admin in your config   Forum quirks, posted by Christoph Kukulies on Wed Nov 24 11:55:57 2010  I just got a Proxy error from your site: When I clicked on the  change password link that was sent to my email, I entered my new password (which was the same that I believed to have used before) and after submitting this form, I got the Proxy error.   Also I find that I can never login with my once set password. Is it the Email or username on gives in the login field?  Other quirk: I never can preview my post. When I click preview, nothing happens.       Re: Forum quirks, posted by Christoph Kukulies on Wed Nov 24 16:30:31 2010                            Christoph Kukulies wrote:                                            I just got a Proxy error from your site: When I clicked on the  change password link that          Re: Forum quirks, posted by Christoph Kukulies on Wed Nov 24 16:38:12 2010                            Christoph Kukulies wrote:                                                                      Re: Forum quirks, posted by Stefan Ritt on Thu Nov 25 12:13:51 2010                            Christoph Kukulies wrote:                                            Let me add one observation though: I always have to put the Submit or Preview button twice in this forum.   How to overide the Date attribute?, posted by Adam Blandford on Wed Nov 24 07:47:25 2010  Hi I have a logbook where I want to override the default Date attribute. I would like to set it by default to the entry date but enable the user to modify to a different date if desired. This is for entries that pertain to an activity performed on a date different to the entry date. To acheive this I have created an attribute called "Subject Date" and used preset = $date. In general this works but I would be happy to take any other suggestions on how to       Re: How to overide the Date attribute?, posted by Stefan Ritt on Wed Nov 24 12:12:37 2010                            Adam Blandford wrote:                               Hi I have a logbook where I want to override the default Date attribute. I would like to set it by default to the entry   elog password , attributes and quoting username and password, posted by Arno Teunisse on Wed Nov 10 23:05:24 2010  Hello   When I want to submit an entrie with elog I have the following problem : ( elogd on windows 7 )        Re: elog password , attributes and quoting username and password, posted by Yoshio Imai on Thu Nov 11 17:51:49 2010                            Arno Teunisse wrote:                                            Please Notice that I've put quotes around : -u "username password" ( the          Re: elog password , attributes and quoting username and password, posted by Arno Teunisse on Thu Nov 11 22:25:18 2010                            Yoshio Imai wrote:                                                   Re: elog password , attributes and quoting username and password, posted by Yoshio Imai on Fri Nov 12 11:48:54 2010  [quote=Arno Teunisse]It seems that the [b]-m option for elog.exe is a required commandline option[/b].[/quote] You are right; I didn't see that part was missing. On the other hand, I obviously didn't see a few other things in your post, either ... ;)             Re: elog password , attributes and quoting username and password, posted by Stefan Ritt on Fri Nov 12 13:12:02 2010                            Arno Teunisse wrote:                                                                   Re: elog password , attributes and quoting username and password, posted by Stefan Ritt on Wed Nov 17 11:48:03 2010                            Yoshio Imai wrote:                                                                Re: elog password , attributes and quoting username and password, posted by Arno Teunisse on Thu Nov 11 17:57:12 2010                            Arno Teunisse wrote:                                       Elogd service crashes on "reply" with percent character in subject line, posted by Mike Zuber on Thu Aug 19 15:26:35 2010  My logbook kept crashing whenever I tried to reply to an existing entry. I found that the percent sign "%", when used in the subject line, will crash the elogd service when you try to reply to the entry. This appears to only happen with windows installations. I tested this on your Linux logbook and it didn't crash.       Re: Elogd service crashes on "reply" with percent character in subject line, posted by Stefan Ritt on Wed Sep 22 14:37:10 2010                            Mike Zuber wrote:                                            My logbook kept crashing whenever I tried to reply to an existing entry. I found that the percent sign          Re: Elogd service crashes on "reply" with percent character in subject line, posted by Mike Zuber on Thu Oct 14 17:50:56 2010                            Stefan Ritt wrote:                                                            Re: Elogd service crashes on "reply" with percent character in subject line, posted by Stefan Ritt on Tue Nov 16 15:56:53 2010                            Mike Zuber wrote:                                                            elog command line submission, posted by Erik Butz on Thu Nov 4 13:23:50 2010  Hi,  I am playing with the elog automatic subscription script, but somehow I am failing in submitting an entry.        Re: elog command line submission, posted by Stefan Ritt on Tue Nov 16 13:25:35 2010  > Hi,  >  > I am playing with the elog automatic subscription script, but somehow I am failing in submitting an entry.    Cell Style Question, posted by Terry Bayne on Tue Nov 2 15:56:33 2010  Is it possible to include more than one style attribute in a "Cell Style" directive? For example, if I want to change the background color and text color for a given cell: Cell Style Status Fixed  = background-color:green;color:white       Re: Cell Style Question, posted by Stefan Ritt on Tue Nov 16 10:29:14 2010                            Terry Bayne wrote:                                            Is it possible to include more than one style attribute in a "Cell Style" directive?   Can anyone help compile ELog 2.8.0 on SunOS 5.11?, posted by Morion Black on Wed Oct 27 23:43:37 2010   I have server with SunOS 5.11: uname -a SunOS *** 5.11 snv_134 i86pc i386 i86pc       Re: Can anyone help compile ELog 2.8.0 on SunOS 5.11?, posted by Stefan Ritt on Tue Nov 16 10:00:48 2010                            Morion Black wrote:                                             I have server with SunOS 5.11:   email format, posted by Marty Jansen on Sat Nov 6 14:32:52 2010   Hi,   In version 2.6.5-1844 we received email like picture below.       Re: email format, posted by Stefan Ritt on Mon Nov 15 16:46:41 2010                            Marty Jansen wrote:                                             Hi,   Execute a python command?, posted by harley on Tue Nov 9 19:28:53 2010  Is there a way to add a button to the elog interface which would execute a python command?       Re: Execute a python command?, posted by Stefan Ritt on Fri Nov 12 16:50:18 2010                            harley wrote:                                           Is there a way to add a button to the elog interface which would execute a python command?   locking entries & auto-submission?, posted by harley on Tue Nov 9 19:36:40 2010  We have multiple users for a single elog.  Aside from making an entry only editable by the author, is there a way to secure the entry if it is being edited so that only one user may edit a particular entry at one time? Also, is there a way to auto-submit entries after x minutes?       Re: locking entries & auto-submission?, posted by Stefan Ritt on Fri Nov 12 16:46:28 2010                            harley wrote:                                           We have multiple users for a single elog.  Aside from making an entry only editable by the author, is there a way to secure the entry   openssl - openssl/ssl.h, posted by Christoph Kukulies on Tue Nov 9 18:05:00 2010  Nasty nasty. I prepared a longish post and only because I forgot to click an Icon of choice, all my message is lost.   Thus in short:       Re: openssl - openssl/ssl.h, posted by Christoph Kukulies on Thu Nov 11 11:08:32 2010                            Christoph Kukulies wrote:                                            Nasty nasty. I prepared a longish post and only because I forgot to click an Icon of choice, all   how to set text column width, posted by phichitpon on Fri Oct 8 04:53:50 2010  hello how to set text column width in Elog thank you       Re: how to set text column width, posted by Stefan Ritt on Fri Oct 8 09:19:13 2010                            phichitpon wrote:                                            hello   SQL Database, posted by lance on Thu Sep 2 10:30:14 2010  We have been running elog for a few years now and its solid. The only thing is we are getting to 140k entries over a few books and its starting to slow down whist searching. My questions is can we go to an SQL type database rather than a flat file? Is it worth it? Is anyone running this type of configuration?       Re: SQL Database, posted by Stefan Ritt on Wed Sep 15 00:21:10 2010                            lance wrote:                                           We have been running elog for a few years now and its solid. The only thing is we are getting to 140k entries over a few books and its starting       Re: SQL Database, posted by Bill Pier on Thu Sep 23 17:22:43 2010                                         What about using something like MySQLfs to get a db backend transparently to ELOG?  I use ENCFS, (a FUSE backend), currently to achieve encrypted logbooks and it works fine -- ELOG never   Cannot bind to port 8080, posted by marco meneghelli on Fri Sep 17 14:54:51 2010  good morning, I have installed elog 2.8.0 from terminal but when I type elogd -p 80       Re: Cannot bind to port 8080, posted by Stefan Ritt on Mon Sep 20 14:54:21 2010                            marco meneghelli wrote:                                            good morning,   Searching Logbooks, posted by David Pilgram on Thu Sep 2 12:40:03 2010  Hi Stefan, I'm starting to get a similar problem to Lance's ("SQL Database").  Searching is beginning to take time.       Re: Searching Logbooks, posted by Stefan Ritt on Wed Sep 15 00:32:48 2010  > Hi Stefan, >  > I'm starting to get a similar problem to Lance's ("SQL Database").  Searching is beginning to take time.          Re: Searching Logbooks, posted by David Pilgram on Wed Sep 15 01:54:56 2010  Hi Stefan, I was rather hoping that was *not* going to be your answer.   how to change char encode for Text column, posted by phichitpon on Thu Aug 19 08:36:11 2010  hello how to change char encode for Text column. my language is thai and use tis-620 for encode. thankyou       Re: how to change char encode for Text column, posted by Stefan Ritt on Wed Sep 15 01:25:27 2010                            phichitpon wrote:                                            hello   honor "user" field in the Apache SSL request object or environment variables in SSL process groups?, posted by Owen LaGarde on Wed Aug 25 02:49:44 2010  Will elog defer user identification and authorization to the ssl engine of a *local* Apache proxy?  I'd like to try elog in a site that requires the service port positively authenticate and identify users via smartcard certificate ID.  Per SOP they have Apache+mod_ssl setting SSLUserName=SSL_CLIENT_S_DN_CN which sets both the SSL request object's "user" field and the REMOTE_USER environment var relative to the mod_ssl's session's process group leader.        Re: honor "user" field in the Apache SSL request object or environment variables in SSL process groups?, posted by Stefan Ritt on Wed Sep 15 01:04:21 2010                            Owen LaGarde wrote:                                            Will elog defer user identification and authorization to the ssl engine of a *local* Apache proxy?    how to convert Common Era (C.E.) into Buddhist Era , posted by phichitpon on Wed Aug 25 09:18:39 2010  how to convert Common Era (C.E.) into Buddhist Era  such as C.E. 2010 to B.E. 2553   (2553=2010+543) .thank you       Re: how to convert Common Era (C.E.) into Buddhist Era , posted by Stefan Ritt on Wed Sep 15 01:02:26 2010                            phichitpon wrote:                                            how to convert Common Era (C.E.) into Buddhist Era  such as C.E. 2010 to B.E. 2553     Password problem after elogd restart, posted by Jack Dapid on Tue Sep 14 11:58:22 2010  Hi. I have ELOG V2.8.0-2313 installed on a SLC 5.5 release and all works fine, Users can register them-self and I see for each of them in the passwd file:       Re: Password problem after elogd restart, posted by Stefan Ritt on Tue Sep 14 23:29:15 2010                            Jack Dapid wrote:                                            Hi.   How to setup elogd as windows service with shell execution?, posted by Robert Heine on Fri Sep 10 15:38:38 2010  Dear colleagues, I am trying to use the elogd as a service with activated shell-execution. Invoking 'elogd -x' on the command line works fine, as well as 'elogd -install'. The option 'elogd -x -install' does not seem to be implemented, so I followed two ways to get this to work:       Re: How to setup elogd as windows service with shell execution?, posted by Stefan Ritt on Mon Sep 13 09:23:29 2010                            Robert Heine wrote:                                            Dear colleagues,   frequent crashes on SL4, posted by Devin Bougie on Wed Feb 4 18:08:42 2009  Hi, All.  Ever since upgrading from an old ELOG release on an aging windows machine to the latest version on Scientific Linux 4 (RHEL4), and  greatly increasing its use, we have seen frequent crashes of elogd.  This has become very disruptive to operations, and any help would be greatly  appreciated.  We are using Apache (running on the same machine as elogd) to secure ELOG using https as per the Administrator's Guide.       Re: frequent crashes on SL4, posted by Edmundo T Rodriguez on Wed Feb 4 18:46:58 2009  > ------ >  > I plan on letting elogd create a core dump, but so far I haven't managed to change its cwd to a directory        Re: frequent crashes on SL4, posted by Stefan Ritt on Wed Feb 4 19:34:35 2009  > Hi, All.  Ever since upgrading from an old ELOG release on an aging windows machine to the latest version on Scientific Linux 4 (RHEL4), and  > greatly increasing its use, we have seen frequent crashes of elogd.  This has become very disruptive to operations, and any help would be greatly  > appreciated.  We are using Apache (running on the same machine as elogd) to secure ELOG using https as per the Administrator's Guide.          Re: frequent crashes on SL4, posted by Devin Bougie on Wed Feb 4 21:41:46 2009  Hi Stefan, > Just follow          Re: frequent crashes on SL4, posted by Devin Bougie on Fri Feb 6 23:43:47 2009  Hi Stefan, The bad news is that elogd is still crashing even after disabling Image Magick.  The good news is that this time it was reproducible and I did obtain a             Re: frequent crashes on SL4, posted by Devin Bougie on Sat Feb 7 01:47:07 2009  > The bad news is that elogd is still crashing even after disabling Image Magick.  The good news is that this time it was reproducible and I did obtain a > stack trace using gdb.                Re: frequent crashes on SL4, posted by Devin Bougie on Sat Feb 7 06:26:48 2009  Hi Stefan, Just incase it helps, I am attaching the file for an entry in our demo logbook.  If I edit this entry and click on submit (without checking "suppress email          Re: frequent crashes on SL4, posted by Devin Bougie on Sat Feb 7 01:59:53 2009  Hi Stefan, I hope I'm not bombarding you, but we seem to be seeing crashes in two separate scenarios.  In addition to the crashes I previously reported (editing a             Re: frequent crashes on SL4, posted by Stefan Ritt on Thu Feb 12 17:13:05 2009  Hi Devin, first of all, your stack traces are only of limited use for me. This typically happens              Re: frequent crashes on SL4, posted by Stefan Ritt on Fri Feb 13 16:57:02 2009  There was a general problem in submitting entries. If the TCP connection between the browser and elog  disconnects during the transmission and only part of the request gets transferred, it consistently  crashed elog. The probability for this is large if you have a slow connection and long attachments. The problem                 Re: frequent crashes on SL4, posted by Devin Bougie on Tue Mar 24 15:14:28 2009  Indeed, uploading images over a satellite connection does not crash the development ELOG server available from SVN.  Our user was unable to  crash  elogd (or upload an image) and reports "The upload window would complain about an "upstream server", but the site was still there."                   difficulty with slow connections (was Re: frequent crashes on SL4), posted by Devin Bougie on Wed Mar 3 22:28:04 2010  Hi, Stefan.  When someone using a satellite connection tries to upload an attachment *or* edit a long entry, it fails and they are presented with an "Internal Server Error."  This is a huge improvement over the previous behavior of crashing elogd, but we were wondering if there is any hope of improving this further so that one can edit large entries or upload attachments over a slow (in this case, satellite) connection.  Do                      difficulty with slow connections (was Re: frequent crashes on SL4), posted by Stefan Ritt on Fri Mar 12 12:49:39 2010  > Hi, Stefan.  When someone using a satellite connection tries to upload an attachment *or* edit a long entry, it fails and they are presented > with an "Internal Server Error."  This is a huge improvement over the previous behavior of crashing elogd, but we were wondering if there is any > hope of improving this further so that one can edit large entries or upload attachments over a slow (in this case, satellite) connection.  Do                         difficulty with slow connections (was Re: frequent crashes on SL4), posted by Devin Bougie on Wed Sep 8 15:31:33 2010  Hi Stefan, > There was a timeout of 1 sec. in the elogd daemon, which probably is too short for a satellite connection. Unfortunately I have no satellite here    fckedit and creating tables, posted by Arno Teunisse on Mon Sep 6 21:21:25 2010  Hello Using windows7 and the elogd 2.7.7 built Jul 31 2009, 13:01:20 revision 2246.  I noticed a bug in the tables created with fckeditor. When on winxp there is no problem. So it seems windows7 related.        Re: fckedit and creating tables, posted by Arno Teunisse on Mon Sep 6 21:36:51 2010                            Arno Teunisse wrote:                                       How to make Subst run?, posted by Robert Heine on Thu Aug 26 15:37:20 2010  Dear colleagues,   I tried to get an Subst <attrib> = $shell(<command>) to work and put this into a Preset text line, like e.g.:         Re: How to make Subst run?, posted by Andreas Luedeke on Fri Sep 3 14:14:07 2010  [quote="Robert Heine"]Dear colleagues,   I tried to get an Subst <attrib> = $shell(<command>) to work and put this into a Preset text line, like e.g.:   [CODE]          Re: How to make Subst run?, posted by Robert Heine on Mon Sep 6 16:18:41 2010  Thank you Andreas! So I will generate the preset entry in a shell script.   Synchronizing mirror causes corruption of logbook entries with multiple logbooks defined?, posted by Glenn Horton-Smith on Fri Aug 27 23:11:45 2010  We have been experiencing corruption of logbook entries by elogd mirror synchronization.  Has anyone else encountered this?  Is there a known cause and/or workaround for it? Details We have two elog servers set up with identical elogd.cfg and password files, except that one server has "Mirror server"       Re: Synchronizing mirror causes corruption of logbook entries with multiple logbooks defined?, posted by Andreas Luedeke on Fri Sep 3 14:43:16 2010                            Glenn Horton-Smith wrote:                                            We have been experiencing corruption of logbook entries by elogd mirror synchronization.  Has          Re: Synchronizing mirror causes corruption of logbook entries with multiple logbooks defined?, posted by Renee Poutissou on Fri Sep 3 19:04:46 2010                            Andreas Luedeke wrote:                                                            Elog v2.7.8 does not show substituted attributes while editing or replying, posted by Dennis Seitz on Thu Aug 19 22:58:45 2010   Since we updated to 2.7.8 we've found a problem. Previously, when we used  Subst on reply subject = Re: $subject       Re: Elog v2.7.8 does not show substituted attributes while editing or replying, posted by Andreas Luedeke on Fri Sep 3 14:25:37 2010                            Dennis Seitz wrote:                                             Since we updated to 2.7.8 we've found a problem.   elog editor loses all text, posted by Kontantin Olchanski on Wed Aug 4 23:46:34 2010  I just typed a long text into this elog, clicked "submit" and it bombed with "you must select an Icon", returned me to the editor with all my text gone gone gone. I do not want to select icons, I just want to report a problem with elog. Well, 2 problems, now. K.O.       Re: elog editor loses all text, posted by Stefan Ritt on Fri Aug 6 13:01:24 2010                            Kontantin Olchanski wrote:                                            I just typed a long text into this elog, clicked "submit" and it bombed with "you must   elog keeps recreating preview .png files?, posted by Kontantin Olchanski on Wed Aug 4 23:52:08 2010  Hi, I rsync an elog database from CERN to TRIUMF every few months and I notice that rsync keeps copying preview files (xxx.png.png, xxx.gif.png, etc) from very old entries. I guess that elogd creates these files from scratch each time they are needed, overwriting any previously existing preview files. This creates extra rsync network traffic and rsync takes longer to complete. Is there any way to avoid this? K.O.       Re: elog keeps recreating preview .png files?, posted by Stefan Ritt on Fri Aug 6 12:55:08 2010                            Kontantin Olchanski wrote:                                            Hi, I rsync an elog database from CERN to TRIUMF every few months and I notice that rsync keeps copying   Important security update of ELOG, posted by Stefan Ritt on Mon Aug 2 13:40:02 2010  Dear ELOG users, this is to announce an important security update. As proposed by Lukasz Olejnik (CERN/PSNC), ELOG has now switched to strong encryption of password. So everybody concerned in security is advised to update to the new version 2.8.0. Existing password files for Windows users and Linux users not       Re: Important security update of ELOG, posted by Stefan Ritt on Thu Aug 5 12:26:12 2010                            Stefan Ritt wrote:                                            Dear ELOG users,   Subst variables and Execute, posted by soren poulsen on Wed Jul 21 16:26:17 2010  Hi   I am trying to use this line from the documentation:       Re: Subst variables and Execute, posted by Stefan Ritt on Wed Jul 21 16:38:05 2010                            soren poulsen wrote:                                            Hi          Re: Subst variables and Execute, posted by soren poulsen on Thu Jul 22 10:17:29 2010                            Stefan Ritt wrote:                                                                      Re: Subst variables and Execute, posted by soren poulsen on Mon Jul 26 11:41:44 2010                            soren poulsen wrote:                                                                         Re: Subst variables and Execute, posted by Stefan Ritt on Wed Jul 28 17:08:55 2010                            soren poulsen wrote:                                            There is sometimes a problem with substitutions like "Execute delete = echo $message id".                   Re: Subst variables and Execute, posted by soren poulsen on Thu Jul 29 13:45:47 2010                            Stefan Ritt wrote:                                                            alphabetize Quick Filter items?, posted by Dennis Seitz on Wed Aug 5 19:05:01 2009   Hi Stefan, I'd like to request a feature: automatic alphabetization of the items in the Quick Filter menus. We track quite a few detector assemblies, which are produced with non-sequential designations. It would be useful if the Quick Filter list was       Re: alphabetize Quick Filter items?, posted by Stefan Ritt on Thu Aug 6 08:00:22 2009                            Dennis Seitz wrote:                                             Hi Stefan,          Re: alphabetize Quick Filter items?, posted by Dennis Seitz on Fri Aug 7 23:09:42 2009                            Stefan Ritt wrote:                                                                      Re: alphabetize Quick Filter items?, posted by Stefan Ritt on Mon Aug 10 17:14:48 2009                            Dennis Seitz wrote:                                                                         Re: alphabetize Quick Filter items?, posted by Dennis Seitz on Thu Jun 3 06:14:50 2010                            Stefan Ritt wrote:                                                                            Re: alphabetize Quick Filter items?, posted by Stefan Ritt on Tue Jun 8 09:53:09 2010                            Dennis Seitz wrote:                                                                               Re: alphabetize Quick Filter items?, posted by Dennis Seitz on Wed Jul 28 17:01:06 2010                            Stefan Ritt wrote:                                                                                  Re: alphabetize Quick Filter items?, posted by Stefan Ritt on Wed Jul 28 17:15:33 2010                            Dennis Seitz wrote:                                                                                     Re: alphabetize Quick Filter items?, posted by Dennis Seitz on Wed Jul 28 22:03:26 2010                            Stefan Ritt wrote:                                                            Disable forward/backward navigation keystrokes?, posted by Bryan Moffit on Wed Jul 28 17:21:31 2010  I wondered if there was a config line that enabled/disabled the forward and backward navigation keystrokes that were implemented in 2.7.0? The current definitions (Control-PgUp/PgDown/Home/End) interfere with those keys I use to navigate between tabs in Firefox.  It'd be nice if they could either be turned off.. or redefined.       Re: Disable forward/backward navigation keystrokes?, posted by Stefan Ritt on Wed Jul 28 17:26:17 2010                            Bryan Moffit wrote:                                            I wondered if there was a config line that enabled/disabled the forward and backward navigation keystrokes          Re: Disable forward/backward navigation keystrokes?, posted by Bryan Moffit on Wed Jul 28 17:32:15 2010                            Stefan Ritt wrote:                                                            What *exactly* do "clone" and "mirror" do?, posted by David McKee on Thu Jul 22 00:31:54 2010  We have been hosting logbook far (geographically and in internet hops) from our experimental site. Recently we have (finally!) gotten reliable on-site internet, and would like to host the log book on-site. I have a suspicion that some combination of the -C, -m, and -M flags will allow me to migrate the logbook automagically and with a minimum risk       Re: What *exactly* do "clone" and "mirror" do?, posted by Stefan Ritt on Wed Jul 28 16:55:32 2010                            David McKee wrote:                                            We have been hosting logbook far (geographically and in internet hops) from our experimental site. Recently   More adventures with SSL, posted by Chuck Brost on Thu Jul 22 16:59:00 2010  Stefan, Everything has been working great since we last spoke (Version 2.7.8), until InfoSec decided to change how the Certs were created.  Now they come with a little bit of code in the .key file before the Hash.. when I put the new .CRT and .KEY in the SSL folder I am asked on starting Elogd to provide       Re: More adventures with SSL, posted by Stefan Ritt on Wed Jul 28 16:38:07 2010                            Chuck Brost wrote:                                            Stefan,   Mail when elog entry is expired, posted by Johan Schuring on Tue Jul 27 10:46:27 2010  Hi,   Is it possible to set a timestamp on an elog entry say for about 5 days in the future, when it is expired and there are no modifications with the       Re: Mail when elog entry is expired, posted by Stefan Ritt on Tue Jul 27 11:35:40 2010                            Johan Schuring wrote:                                            Hi,          Re: Mail when elog entry is expired, posted by Johan Schuring on Tue Jul 27 15:48:19 2010                            Stefan Ritt wrote:                                                            drop in replacement for FCKeditor?, posted by Bill Pier on Thu Jun 10 15:10:19 2010  Is it possible to use a drop-in replacement for the FCKeditor?        Re: drop in replacement for FCKeditor?, posted by Stefan Ritt on Thu Jun 10 15:19:51 2010                            Bill Pier wrote:                                            Is it possible to use a drop-in replacement for the FCKeditor?           Re: drop in replacement for FCKeditor?, posted by Bill Pier on Thu Jul 1 22:59:41 2010                            Stefan Ritt wrote:                                                                      Re: drop in replacement for FCKeditor?, posted by Stefan Ritt on Fri Jul 2 08:55:11 2010                            Bill Pier wrote:                                                                      Re: drop in replacement for FCKeditor?, posted by Andreas Luedeke on Thu Jul 22 15:51:50 2010                            Bill Pier wrote:                                                               Enable user to view only, not post/delete., posted by Denis Perevalov on Tue Jul 20 21:03:10 2010  Hi, I have just discovered elog and I absolutely love it. I have a question. Is there a way to enable user to view only, not post/delete in my elog. Also I would like to allow them to view only certain       Re: Enable user to view only, not post/delete., posted by Stefan Ritt on Wed Jul 21 12:33:39 2010                            Denis Perevalov wrote:                                            I have a question. Is there a way to enable user to view only, not post/delete in my elog. Also I would   elogd -C failing to sync password file with "Received invalid response from elogd server" message, posted by John Rouillard on Sun May 2 17:43:06 2010  Hello: I am running release 2.7.8 of elog. I am using the cloning/syncing features       Re: elogd -C failing to sync password file with "Received invalid response from elogd server" message, posted by John Rouillard on Sun May 9 18:12:28 2010  Does anybody have any ideas? Should I post a config or something? -- rouilj          Re: elogd -C failing to sync password file with "Received invalid response from elogd server" message, posted by Stefan Ritt on Mon May 10 09:55:12 2010  Hi Rouilj, re-posting your bug report doe not help. If I'm not replying immediately it means I'm pretty busy with other things, so just be patient.             Re: elogd -C failing to sync password file with "Received invalid response from elogd server" message, posted by John Rouillard on Mon May 17 04:01:16 2010  [quote="Stefan Ritt"]Hi Rouilj, re-posting your bug report doe not help. If I'm not replying immediately it means I'm pretty busy with other things, so just be patient. [/quote]                Re: elogd -C failing to sync password file with "Received invalid response from elogd server" message, posted by John Rouillard on Mon May 17 04:19:29 2010  [quote="John Rouillard"] I think I kind of see what's happening here. In is_command_allowed you add the GetPwdFile to the list of allowed command but only if is_admin_user is true. Since the user is guest at that point, I assume                   Re: elogd -C failing to sync password file with "Received invalid response from elogd server" message, posted by Stefan Ritt on Tue May 18 13:21:32 2010  [quote="John Rouillard"][quote="John Rouillard"] I think I kind of see what's happening here. In is_command_allowed you add the GetPwdFile to the list of allowed command but only if is_admin_user is true. Since the user is guest at that point, I assume                      Re: elogd -C failing to sync password file with "Received invalid response from elogd server" message, posted by John Rouillard on Tue May 18 21:17:35 2010  [quote="Stefan Ritt"] Ok, now I got it! The problem was that you used "Guest menu commands = ..." and I did not. So the behavior is different with that option, which is why I could not reproduce your problem initially. Now I could reproduce it and the cleanest fix is this:                         Re: elogd -C failing to sync password file with "Received invalid response from elogd server" message, posted by Stefan Ritt on Wed May 19 09:57:50 2010  [quote="John Rouillard"]Ok, so this patch fixes the problem on the client side (rather than the server side like my patch) of the cloning process. I can't tell from the patch above but will this fix allow the cloning process to "complete" but without the password file being copied, or does code outside the patched section try to login and get                            Re: elogd -C failing to sync password file with "Received invalid response from elogd server" message, posted by John Rouillard on Thu May 20 03:37:59 2010  [quote="Stefan Ritt"][quote="John Rouillard"]Ok, so this patch fixes the problem on the client side (rather than the server side like my patch) of the cloning process. I can't tell from the patch above but will this fix allow the cloning process to "complete" but without the password file being copied, or does code outside the patched section try to login and get                               Re: elogd -C failing to sync password file with "Received invalid response from elogd server" message, posted by John Rouillard on Sat Jun 12 05:55:39 2010  [quote="John Rouillard"] Sorry to report that it fails same as originally with: [code]   change design part of the discussion board, posted by Heinzmann on Sun Jun 6 22:54:55 2010  Hello Stefan,   If I would like to change the design of the attached part of the discussion board like:       Re: change design part of the discussion board, posted by Stefan Ritt on Tue Jun 8 09:02:03 2010                            Heinzmann wrote:                                            Hello Stefan,          Re: change design part of the discussion board, posted by Heinzmann on Tue Jun 8 23:08:41 2010                            Stefan Ritt wrote:                                                                      Re: change design part of the discussion board, posted by Stefan Ritt on Wed Jun 9 08:26:20 2010                            Heinzmann wrote:                                            I have done the changes to my logbock, but I think I have done something wrong. As an example, the window   inline-code, posted by Yoshio Imai on Tue Jun 8 15:48:06 2010  Hi, Stefan! Sometimes, it is annoying that the [code][code][/code]-Tag creates a line break, because there are situations where verbatim text inside the regular text       Re: inline-code, posted by Stefan Ritt on Tue Jun 8 16:33:07 2010  [quote="Yoshio Imai"]Sometimes, it is annoying that the [code][code][/code]-Tag creates a line break, because there are situations where verbatim text inside the regular text flow is desirable (just like here). I would like to request an additional elcode-tag [code][ilcode][/code] (in-line code) which translates to [code]<code>[/code] instead of [code]<pre>[/code].   Restricting logbook view, posted by Allen on Fri May 21 14:37:26 2010  Is there anyway to restrict access so that a user can only see the log entries they post or only replies to their log entry?  I know it is possible to restrict editing to only posts they submitted, but I have a need to not even allow them to see other posts except for what they submitted and I am wondering if this is possible currently, or if this is planned, or could be planned for a future version?       Re: Restricting logbook view, posted by Stefan Ritt on Tue Jun 8 12:02:36 2010                            Allen wrote:                                           Is there anyway to restrict access so that a user can only see the log entries they post or only replies to their log entry?  I know   Deamon on Debian, posted by Marco Rojas on Wed Jun 2 18:46:32 2010  Hi, I have been using ELOG for a while and I love it.  It is a default installation on Debian Lenny and ELOG 2.7.8.  I am having problems with the deamon script, I can stop the service by doing /etc/init.d/elog stop but I can't started.  When I do /etc/init.d/elog start I get this error:       Re: Deamon on Debian, posted by Stefan Ritt on Tue Jun 8 09:21:16 2010                            Marco Rojas wrote:                                            Hi,   cannot start elog, posted by harley on Thu May 27 22:35:49 2010  I have v2.7.7 of elog running on a OSX system running 10.6 I configured and installed about a year ago.  It's a wonderful thing to have. I acquired another system running 10.6 to dedicate to the elog app.  I downloaded 2.7.8  and performed the following steps: extract tarball in the desired directory       Re: cannot start elog, posted by Stefan Ritt on Tue Jun 1 13:17:18 2010                            harley wrote:                                           I have v2.7.7 of elog running on a OSX system running 10.6 I configured and installed about a year ago.  It's a wonderful thing to have.   attachment filename bug & Makefile issue, posted by A. Martin on Sat May 15 06:01:40 2010  If I upload the file "000000_000000_file.txt", elog will chop the filename to "file.txt."  Also, this effects the file's displayed "Uploaded" time.  It shows the file as being uploaded on: "Tue Nov 30 00:00:00 1999"       Re: attachment filename bug & Makefile issue, posted by Stefan Ritt on Tue May 18 16:40:15 2010  > If I upload the file "000000_000000_file.txt", elog will chop the filename to "file.txt."  Also, this effects > the file's displayed "Uploaded" time.  It shows the file as being uploaded on: "Tue Nov 30 00:00:00 1999"          Re: attachment filename bug & Makefile issue, posted by A. Martin on Thu May 20 04:33:07 2010    Required Attributes, posted by Eric Krise on Fri May 14 16:53:54 2010  Is there a way to require a certain attribute on reply, but not on an original entry?  In some cases info. for these fields only exists on reply.       Re: Required Attributes, posted by Stefan Ritt on Fri May 14 17:03:36 2010                            Eric Krise wrote:                                            Is there a way to require a certain attribute on reply, but not on an original entry?  In some   Entry merging, posted by Eric Krise on Thu May 13 13:31:53 2010  Is there a way to merge existing entries from several logbooks into a single logbook?        Re: Entry merging, posted by Stefan Ritt on Fri May 14 08:57:07 2010                            Eric Krise wrote:                                            Is there a way to merge existing entries from several logbooks into a single logbook?           Re: Entry merging, posted by Eric Krise on Fri May 14 16:50:53 2010                            Stefan Ritt wrote:                                         HTML email format displays plain text if email client is offline, posted by Jim Covert on Tue May 11 19:14:37 2010  My elog server is hosted behind a firewall and I use a VPN client to connect to the network on which it is hosted.  When I'm logged into the VPN emails from elog display fine, but when I'm not connected to the VPN emails display in plain text because the email client is unable to load "default.css" since it's behind a firewall.        Re: HTML email format displays plain text if email client is offline, posted by Stefan Ritt on Wed May 12 16:30:45 2010                            Jim Covert wrote:                                            My elog server is hosted behind a firewall and I use a VPN client to connect to the network on which   cell style bug?, posted by ch huet on Thu May 6 17:40:47 2010  hello i've tried to change the color of a cell with "cell style"  it doesn't works       Re: cell style bug?, posted by Stefan Ritt on Fri May 7 08:09:16 2010                            ch huet wrote:                                           hello          Re: cell style bug?, posted by ch huet on Fri May 7 15:35:12 2010                            Stefan Ritt wrote:                                                            default font size in editor window, posted by Sara Vanini on Wed May 5 13:43:41 2010  Hi,  is it possible to have as DEFAULT the font Size larger ? Thanks       Re: default font size in editor window, posted by Stefan Ritt on Wed May 5 13:46:40 2010                            Sara Vanini wrote:                                            Hi,   background color and font, posted by siva kumar on Sun Apr 4 11:26:19 2010  Stefan, i recently download the elog server for windows and configured. its working with me fine i would like to configure my elog server for to display a different color when am giving a specific "value" for a attribute "Status".       Re: background color and font, posted by Stefan Ritt on Thu Apr 15 13:32:35 2010                            siva kumar wrote:                                            Stefan,          Re: background color and font, posted by siva kumar on Sun Apr 18 11:54:38 2010                            Stefan Ritt wrote:                                                                      Re: background color and font, posted by Stefan Ritt on Mon Apr 19 08:49:49 2010                            siva kumar wrote:                                            I really appreciate you doing this for me. i downloaded the latest version and configured as you said.          Re: background color and font, posted by Ruslan on Mon May 3 23:12:55 2010                            Stefan Ritt wrote:                                                                      Re: background color and font, posted by Stefan Ritt on Tue May 4 09:22:19 2010                            Ruslan wrote:                                                            Re: background color and font, posted by Ruslan on Tue May 4 09:40:40 2010                            Stefan Ritt wrote:                                                                         Re: background color and font, posted by Ruslan on Tue May 4 10:48:06 2010                            Stefan Ritt wrote:                                                                            Re: background color and font, posted by Stefan Ritt on Tue May 4 11:43:22 2010                            Ruslan wrote:                                                                  Re: background color and font, posted by Ruslan on Tue May 4 12:32:28 2010                            Stefan Ritt wrote:                                                            Problems with SSL and Synchronization, posted by Mark Langkau on Tue Dec 30 21:13:02 2008  I installed ELOG on a Linux server (CentOS 5.2) and a WinXP laptop. - If I set both servers to non-SSL, I can synchronize with no problems. - If I set both servers to use SSL, synchronization fails with "Error code: ssl_error_rx_record_too_long"        Re: Problems with SSL and Synchronization, posted by Stefan Ritt on Wed Dec 31 11:31:49 2008                              Mark Langkau wrote:                                         Re: Problems with SSL and Synchronization, posted by Brett Viren on Mon Mar 23 22:29:20 2009  > Synchronization with SSL does not yet work. I have to find some time to implement it. Since you are already the second one mentioning this, it slipped higher on my to-do list              Re: Problems with SSL and Synchronization, posted by Brett Viren on Thu Mar 26 21:34:24 2009  [quote="Brett Viren"] Please make this 3.  We (Daya Bay experiment) are just starting to set up Elog and will really want this feature!          Re: Problems with SSL and Synchronization, posted by Diogo Alves on Mon Nov 9 09:32:19 2009                            Stefan Ritt wrote:                                                       Re: Problems with SSL and Synchronization, posted by Anthony Palladino on Sat May 1 18:02:30 2010                                         Stefan Ritt wrote:                                                             Logout, authentication failure causes "redir", posted by Niklas on Wed Apr 28 10:38:51 2010  When someone logout from my Elog, or the person does not have access to a logbook (due to "Login user  =") the person gets a blank webpage with "redir" typed in the upper left corner. I guess it should redir to some webpage? How can I get it to actually do that? Am I missing something in elogd.cfg?       Re: Logout, authentication failure causes "redir", posted by Stefan Ritt on Wed Apr 28 11:09:47 2010                            Niklas wrote:                                           When someone logout from my Elog, or the person does not have access to a logbook (due to "Login user  =") the person gets          Re: Logout, authentication failure causes "redir", posted by Niklas on Wed Apr 28 16:34:17 2010                            Stefan Ritt wrote:                                                            Recursively open a new attribute of the same type, posted by Diogo Alves on Thu Apr 22 09:51:07 2010  Hi, I have a logbook which, among other things, contains these attributes: Options Ingredient = Egg, Oil       Re: Recursively open a new attribute of the same type, posted by Stefan Ritt on Thu Apr 22 12:29:05 2010                            Diogo Alves wrote:                                            Hi,          Re: Recursively open a new attribute of the same type, posted by Diogo Alves on Fri Apr 23 08:32:10 2010                            Stefan Ritt wrote:                                                                      Re: Recursively open a new attribute of the same type, posted by Stefan Ritt on Fri Apr 23 08:33:53 2010                            Diogo Alves wrote:                                            I guess my next question is whether it is possible to have, for example, 2 attributes:   How to control table width in listing , posted by Rex Tayloe on Thu Apr 22 20:02:46 2010  Greetings, In table list mode, I would like to control how much width is given to "subject" column (my attribute).   Can't find any method to control in config file.  Problem is that the subject is often quite long and jammed into a small width, when the text is often empty and has more   Can other pages hide behind elog user authentication?, posted by Jason St. John on Sat Apr 17 01:06:58 2010  Hello, The elog security suits me just fine: the content is not available unless users have logged in, and as administrator I have complete control over who that is and what their privileges are. I can easily share somewhat sensitive notes, plots, and findings without making them completely open to the       Re: Can other pages hide behind elog user authentication?, posted by Stefan Ritt on Mon Apr 19 08:55:19 2010                            Jason St. John wrote:                                            Hello,   Active Directory authentication, posted by Alan Grant on Mon Mar 29 06:05:08 2010  Found a thread from 2004 ("External authentication") asking about the possibility of tying that in with ELog and answer was "Not yet". With time past, any chance this is now possible? I didn't see any more info on that since.  I'd like to explore using AD to set up/manage groups for ELog authentication. Alternatively, is there currently another way with ELog to manage groups?       Re: Active Directory authentication, posted by Stefan Ritt on Thu Apr 15 13:16:25 2010                            Alan Grant wrote:                                            Found a thread from 2004 ("External authentication") asking about the possibility of tying   "No SMTP host defined in [global] section of configuration file" error, posted by Pedro Gil de Araújo Gordo on Wed Apr 14 12:55:38 2010  Hi When I upload a message with a attachment (and also without an attachment) I get this message: "No SMTP host defined in [global] section       Re: "No SMTP host defined in [global] section of configuration file" error, posted by Stefan Ritt on Wed Apr 14 13:03:37 2010                            Pedro Gil de Araújo Gordo wrote:                                            Hi   Submit Buton, posted by Gary Wilcox on Thu Apr 8 18:06:25 2010  When entering data for a new log entry some folks always type in an attribute and then the "Enter" key which automatically   submits the entry. Is there a way to prevent this so the only way a new entry is submitted is with the Submit button. Also  is there a way to setup the main text box as a required attribute?       Re: Submit Buton, posted by Stefan Ritt on Tue Apr 13 13:18:15 2010                            Gary Wilcox wrote:                                            When entering data for a new log entry some folks always type in an attribute and then the "Enter"   Attach multiple (many!) files at one time, posted by Eric Feng on Sun Mar 21 19:03:52 2010  Hi, Is it possible to attach multiple files at one time?  Right now I have to attach each individually, click submit, then confirm, then re-select the next file...       Re: Attach multiple (many!) files at one time, posted by Stefan Ritt on Mon Mar 22 08:58:47 2010                            Eric Feng wrote:                                            Hi,          Re: Attach multiple (many!) files at one time, posted by Eric Feng on Tue Apr 6 00:45:10 2010                            Stefan Ritt wrote:                                                            Fail to connect to SMTP server on WinXP but works on Win2K, posted by David Spindler on Sat Mar 6 19:59:58 2010          Re: Fail to connect to SMTP server on WinXP but works on Win2K, posted by David Spindler on Sat Mar 6 20:06:24 2010  Fantastic. I forgot the icon and when I resent nothing was left.   Here goes again!          Re: Fail to connect to SMTP server on WinXP but works on Win2K, posted by David Spindler on Sat Mar 6 20:16:52 2010                            David Spindler wrote:                                            Fantastic. I forgot the icon and when I resent nothing was left.               Re: Fail to connect to SMTP server on WinXP but works on Win2K, posted by Stefan Ritt on Thu Mar 11 15:47:21 2010                            David Spindler wrote:                                                                         Re: Fail to connect to SMTP server on WinXP but works on Win2K, posted by David Spindler on Fri Mar 12 19:30:53 2010                            Stefan Ritt wrote:                                                                            Re: Fail to connect to SMTP server on WinXP but works on Win2K, posted by David Spindler on Wed Mar 17 21:34:53 2010                            David Spindler wrote:                                                                               Re: Fail to connect to SMTP server on WinXP but works on Win2K, posted by soren poulsen on Wed Mar 17 22:39:59 2010                            David Spindler wrote:                                                                                  Re: Fail to connect to SMTP server on WinXP but works on Win2K, posted by David Spindler on Thu Mar 18 20:08:03 2010                            soren poulsen wrote:                                                                                     Re: Fail to connect to SMTP server on WinXP but works on Win2K, posted by David Spindler on Thu Mar 18 20:34:41 2010                            David Spindler wrote:                                                                                        Re: Fail to connect to SMTP server on WinXP but works on Win2K, posted by soren poulsen on Fri Mar 19 13:45:13 2010                            David Spindler wrote:                                                                                           Re: Fail to connect to SMTP server on WinXP but works on Win2K, posted by David Spindler on Fri Mar 19 15:56:38 2010                            soren poulsen wrote:                                                                                              Re: Fail to connect to SMTP server on WinXP but works on Win2K, posted by David Spindler on Fri Mar 19 20:18:17 2010                            David Spindler wrote:                                                                                                    Re: Fail to connect to SMTP server on WinXP but works on Win2K, posted by David Spindler on Fri Mar 19 20:26:44 2010                            David Spindler wrote:                                                            Thread view problem in searches, posted by soren poulsen on Tue Mar 2 14:21:46 2010  Hi, When I upgrade from build 2278 to  2282 the thread view changes when performing searches: The thread children are not indented and there are no "thread icons" in the search list (e.g. like the read right arrow for replies).       Re: Thread view problem in searches, posted by soren poulsen on Sat Mar 6 20:53:25 2010                                         soren poulsen wrote:                                                         Hi,          Re: Thread view problem in searches, posted by Stefan Ritt on Thu Mar 11 15:44:01 2010                            soren poulsen wrote:                                                                      Re: Thread view problem in searches, posted by soren poulsen on Sun Mar 14 21:04:44 2010                            Stefan Ritt wrote:                                                                            Re: Thread view problem in searches, posted by Stefan Ritt on Mon Mar 15 08:23:45 2010                            soren poulsen wrote:                                            That sounds fine but I think there is a problem with rendering under Opera. I enclose a screen shot:                   Re: Thread view problem in searches, posted by soren poulsen on Mon Mar 15 18:35:26 2010                            Stefan Ritt wrote:                                                                               Re: Thread view problem in searches, posted by soren poulsen on Mon Mar 15 18:58:06 2010                            soren poulsen wrote:                                                                                  Re: Thread view problem in searches, posted by soren poulsen on Tue Mar 16 11:58:55 2010                            soren poulsen wrote:                                                            Invalid URL for groups beneath top groups in overview page, posted by Bertram Metz on Mon Mar 15 09:29:11 2010  Hi, I'm trying to implement top groups and started with the sample configuration shown in the 'Syntax of elogd.cfg' chapter of the documentation. But now I'm facing a problem with the links in the logbook selection page.       Re: Invalid URL for groups beneath top groups in overview page, posted by Stefan Ritt on Mon Mar 15 11:21:30 2010                            Bertram Metz wrote:                                            Hi,          Re: Invalid URL for groups beneath top groups in overview page, posted by Bertram Metz on Mon Mar 15 13:20:17 2010                            Stefan Ritt wrote:                                                            Problem using attribute type , posted by soren poulsen on Wed Feb 17 17:02:38 2010  Hi, This little logbook has a problem: ------------------------       Re: Problem using attribute type , posted by soren poulsen on Thu Feb 18 13:21:15 2010                            soren poulsen wrote:                                            Hi,          Re: Problem using attribute type , posted by soren poulsen on Thu Feb 18 15:37:07 2010                            soren poulsen wrote:                                                                      Re: Problem using attribute type , posted by Stefan Ritt on Fri Mar 12 09:27:25 2010                            soren poulsen wrote:                                                                         Re: Problem using attribute type , posted by soren poulsen on Sun Mar 14 20:57:26 2010                            Stefan Ritt wrote:                                                            eLog crash, posted by Mirza Ehsan on Wed Mar 10 10:36:02 2010  I am using eLog ELOG V2.6.1-1681 which has 7 log books under 8  categories. Out of 7 log books, 2 are daily used. It happened that two weeks  back. I modified information on two log books which were not used for quite longtime. Hence using CONFIG, I updated these log books, changing text etc. After       Re: eLog crash, posted by Stefan Ritt on Thu Mar 11 15:36:39 2010                            Mirza Ehsan wrote:                                            I am using eLog          Re: eLog crash, posted by Mirza Ehsan on Sat Mar 13 09:40:37 2010                            Stefan Ritt wrote:                                                            Last 3 days of log entries, posted by Paul O'Shaughnessy on Wed Feb 10 15:27:43 2010  Is it possible to create a drop down menu for the last 3 days of log entries. Currently we have the last day, month, 3 month, etc. Reason being, after a weekend most people would like to view the log entries for the last three days. Can anyone help me out here?       Re: Last 3 days of log entries, posted by David Pilgram on Mon Feb 22 13:21:14 2010  It is a good point, and surprised that this particular number of days was overlooked. It only needs four lines added into elogd.c to achieve this.  Even with my notorious           Re: Last 3 days of log entries, posted by Stefan Ritt on Fri Mar 12 09:16:28 2010  > It is a good point, and surprised that this particular number of days was overlooked. >  > It only needs four lines added into elogd.c to achieve this.  Even with my notorious              Re: Last 3 days of log entries, posted by Stefan Ritt on Fri Mar 12 16:18:20 2010  > David send me his modification and I put it into the main source code, so it will be contained in the next Windows  > version.   Elogd crashes when closing more than ten entries, posted by Cliff Shaw on Fri Mar 12 08:18:06 2010  Hi Stefan, I have noticed a problem when closing multiple log entries i.e entries which have more than 10 threads. I use Select -> Click the box that appears next to the thread I wish to close -> Edit.       Re: Elogd crashes when closing more than ten entries, posted by Stefan Ritt on Fri Mar 12 13:54:14 2010                            Cliff Shaw wrote:                                            Hi Stefan,   Show Attributes, posted by Ulf Helmersson on Wed Feb 24 15:54:40 2010   This programing have stoped working, I guess after last update. Elog is running on Solaris. Ulf Helmersson       Re: Show Attributes, posted by Stefan Ritt on Fri Mar 12 12:59:25 2010                            Ulf Helmersson wrote:                                             This programing have stoped working, I guess after last update.   could not get the threaded display working, posted by FX FRERE on Tue Feb 9 18:49:10 2010  Hi, I have been trying to get the display mode into threaded by default, it does not work on any of my logbooks. I saw related threads in this forum but none gave me a solution (unless the 2.7.8-2282 is available for download).       Re: could not get the threaded display working, posted by Stefan Ritt on Fri Mar 12 12:28:36 2010                            FX FRERE wrote:                                            I have been trying to get the display mode into threaded by default, it does not work on any of my logbooks.   can one use a IOption field for conditional tests?, posted by FX FRERE on Tue Feb 9 18:54:22 2010  Hi again, I was wondering if one could use a conditional statement on an IOption attribute? Indeed i try to do a visual logbook (a green check for OK result, a red cross for NOK result), unfortunately i cannot refer to the attributes value for conditional test, e.g:       Re: can one use a IOption field for conditional tests?, posted by Stefan Ritt on Fri Mar 12 11:26:27 2010                            FX FRERE wrote:                                            Hi again,   Grouping Logbooks, posted by mike cianci on Sun Dec 14 17:04:24 2008  Normal 0       Re: Grouping Logbooks, posted by Stefan Ritt on Mon Dec 15 09:01:35 2008                              mike cianci wrote:                                         Re: Grouping Logbooks, posted by mike cianci on Fri Feb 12 08:31:14 2010                            Stefan Ritt wrote:                                                          Re: Grouping Logbooks, posted by Stefan Ritt on Fri Mar 12 10:15:20 2010                            mike cianci wrote:                                            Stefan, sorry to bother you yet again. but I can not seem to get the "Subdir" to do what I   Log Thread Close Automatically, posted by tom on Sat Feb 20 14:57:27 2010   If you have a logbook and you create a new entry, is it possible to put a time limit on that new entry so that edits/replies are only valid for certain amount of time.  I am looking for a way that would allow me to have a user start a new message, but after 8 hours, that message becomes locked and no one can edit or add to the message.  This is for some shift work and we do not want users to go back after their shift and edit the messages.       Re: Log Thread Close Automatically, posted by Yoshio Imai on Mon Feb 22 11:15:48 2010                            tom wrote:                                             If you have a logbook and you create a new entry, is it possible to put a time limit on that new entry so that       Re: Log Thread Close Automatically, posted by Stefan Ritt on Fri Mar 12 09:18:11 2010                            tom wrote:                                            If you have a logbook and you create a new entry, is it possible to put a time limit on that new entry so that edits/replies are only   Limit elog e-mail to only people involved with an entry, posted by Paul Paquette on Sat Mar 6 19:13:55 2010  Howdy and Thank you in advance.        Can I limit an elog entry mails to only go to my e-mail, my supervisor and the person who is entering the elog entry.  I have the Elog server on Windows XP Pro running version 2.7.8.2282.       Re: Limit elog e-mail to only people involved with an entry, posted by Stefan Ritt on Fri Mar 12 08:57:07 2010                            Paul Paquette wrote:                                            Can I limit an elog entry mails to only go to my e-mail, my supervisor and the person who is entering   Wrong author when replying a reply, posted by Mads Jessen on Mon Mar 8 16:16:39 2010  When replying on a reply, the author is set to the author on the original reply? Othervice it workes great! part of code: ...       Re: Wrong author when replying a reply, posted by David Pilgram on Tue Mar 9 00:48:28 2010  Just to say that this bug was fixed some time ago - I don't remember when (a senior moment).   I know because I reported it to Stefan (along with the rest of the universe), as it was appearing  on this forum when it was running on that particular SVN version.        Re: Wrong author when replying a reply, posted by Stefan Ritt on Thu Mar 11 15:38:32 2010                            Mads Jessen wrote:                                            When replying on a reply, the author is set to the author on the original reply? Othervice it workes   Summary text field is empty for replied entries, posted by Thomas on Thu Mar 11 12:01:35 2010  It is possible to show the (new) text of a replied entry in the summary text field ? Actually only for the original entries the text was shown in the text column of the summary report, not for the replies.         Re: Summary text field is empty for replied entries, posted by Stefan Ritt on Thu Mar 11 14:59:29 2010                            Thomas wrote:                                           It is possible to show the (new) text of a replied entry in the summary text field ?          Re: Summary text field is empty for replied entries, posted by Thomas on Thu Mar 11 15:29:40 2010                            Stefan Ritt wrote:                                                                      Re: Summary text field is empty for replied entries, posted by Stefan Ritt on Thu Mar 11 15:35:40 2010  You just start writing on top of the cited text                            Thomas wrote:                                  Single Button Entry, posted by Geoff Ellis on Tue Feb 16 04:17:24 2010  For our application we have a lot of very common events we would like to log.  It would be preferable that for certain events/entries we could setup a single button / quick entry method.  Is there away to accomplish this?       Re: Single Button Entry, posted by Yoshio Imai on Thu Feb 18 18:50:57 2010                            Geoff Ellis wrote:                                            For our application we have a lot of very common events we would like to log.  It would be preferable that for       Re: Single Button Entry, posted by Capt. Ben Smith on Sun Feb 28 07:25:10 2010                            Geoff Ellis wrote:                                            For our application we have a lot of very common events we would like to log.  It would be preferable          Re: Single Button Entry, posted by Stefan Ritt on Wed Mar 3 14:29:08 2010                            Capt. Ben Smith wrote:                                                            Preset text =, posted by tom on Sat Feb 20 18:29:31 2010  I am looking for the correct syntax for Preset Text =   I have an html file I want set in the editor so that my users can just enter in the data below the predetermined heading.  What is the correct       Re: Preset text =, posted by Stefan Ritt on Sun Feb 21 13:48:56 2010                            tom wrote:                                           I am looking for the correct syntax for Preset Text =   Remove "demo" logbook.., posted by Tony Albers on Thu Feb 18 20:16:13 2010  Hi, Is it possible to remove the "demo" logbook? If I rename the section in elogd.cfg , it complains:       Re: Remove "demo" logbook.., posted by Tony Albers on Fri Feb 19 13:03:31 2010                            Tony Albers wrote:                                            Hi,          Re: Remove "demo" logbook.., posted by Stefan Ritt on Fri Feb 19 13:10:50 2010                            Tony Albers wrote:                                                                      Re: Remove "demo" logbook.., posted by Tony Albers on Fri Feb 19 14:12:41 2010                            Stefan Ritt wrote:                                                            defult format in entry window, posted by Sara Vanini on Tue Feb 9 14:41:02 2010  Hi,  is there a way to set default preferences for text in entry text window, as regards : font type, font size, line spacing, paragraph, etc...          Re: defult format in entry window, posted by Stefan Ritt on Tue Feb 9 15:13:20 2010                            Sara Vanini wrote:                                            Hi,   insert screenshots directly to elog?, posted by harley on Wed Feb 3 21:54:41 2010  Elog is excellent! I apologize for the naive question, but is there a way to insert screenshots directly into elog entries?       Re: insert screenshots directly to elog?, posted by Yoshio Imai on Fri Feb 5 14:51:23 2010  Since elog is only the web server providing (comfortable) access to the logbook database, it relies on the web browser (possibly enhanced by script code) for facilities to attach pictures and other files to entries. So unless your browser has such an extension or someone writes some sort of script that can do it, the only way is to use an external capturing program, save the picture and upload it in the usual way. Cf. also entry   Backing up an entire eLog, posted by Ed Rogers on Tue Feb 2 21:52:00 2010  Hi,  I've been using the ELOG software for about a year now.  I love it!  But as my ELOG becomes more valuable, I become more paranoid about potential data loss.  (We've had numerous close-calls with disk failures, recently.)  Is there a way to download a backup of my ELOG, all at once?  Maybe a command that could create a tar.gz of all the entries and attachments?  Further, is there also a command to restore from such a backup?  Apologies if this question       Re: Backing up an entire eLog, posted by Stefan Ritt on Wed Feb 3 09:49:58 2010                            Ed Rogers wrote:                                            Hi,  I've been using the ELOG software for about a year now.  I love it!  But as my ELOG becomes more   ELOG for personal use only, posted by Sara Vanini on Thu Jan 28 09:54:56 2010  Hi,  I'd like to use ELOG as personal work logbook and database with search facilities       Re: ELOG for personal use only, posted by Stefan Ritt on Thu Jan 28 11:20:15 2010                            Sara Vanini wrote:                                            Hi,           Re: ELOG for personal use only, posted by Sara Vanini on Mon Feb 1 10:14:12 2010                            Stefan Ritt wrote:                                                                      Re: ELOG for personal use only, posted by Stefan Ritt on Mon Feb 1 10:17:03 2010                            Sara Vanini wrote:                                            I've properly set the firewall, and access is forbidden from outside. But when I don't have internet   handwriting, posted by stefan harjes on Thu Jan 28 19:21:39 2010  I write my lab journal with pen and though of getting a linux supported tablet. Has anybody ever used ELOG and did input using a tablet?     first install comments, posted by Kenneth McFarlane on Sun Jan 24 18:00:11 2010  I am testing Elog for personal and group use. I am starting with a Windows install on a PC. (I came across Elog when doing a shift on ATLAS at CERN.) It took me some time to discover how to access a local logbook and create a new one. I suggest adding short sections in a prominent place in the guides:       Re: first install comments, posted by Stefan Ritt on Mon Jan 25 09:28:18 2010                            Kenneth McFarlane wrote:                                            I am testing Elog for personal and group use. I am starting with a Windows install on a PC. (I came   Collapse to Last and Quick Filter , posted by Gabriele Sirri on Sat Jan 2 01:34:57 2010  Hello,    I feel that the filter result could be confusing and unexpected when "COLLAPSE TO LAST" is enabled: you  filter the first entry but you show the last one. What is filtered doesn't correspond with what is shown (look        Re: Collapse to Last and Quick Filter , posted by Stefan Ritt on Tue Jan 12 09:12:28 2010  > Hello, >    I feel that the filter result could be confusing and unexpected when "COLLAPSE TO LAST" is enabled: you  > filter the first entry but you show the last one. What is filtered doesn't correspond with what is shown (look           Re: Collapse to Last and Quick Filter , posted by Gabriele Sirri on Mon Jan 18 02:13:19 2010  Hello,    I gave it a try using the svn version n. 2283 (12 Jan 2010).  The threaded display can be collapsed only if you don't  apply any sorting. In the latter case, if you sort in some way ( with "Sort Attributes =" or "sort=" in the url), the              Re: Collapse to Last and Quick Filter , posted by Stefan Ritt on Mon Jan 18 08:18:48 2010  > However (considering the bug fixed for the collapsed thread display), breaking the thread is not a confortable solution.  Well, but it's the only way which gives you a 1:1 correlation between what you filter and what you see below. If you want to    quick filter, posted by deletoille on Thu Jan 14 16:43:16 2010  Normal 0 21       Re: quick filter, posted by Stefan Ritt on Thu Jan 14 16:44:49 2010                            deletoille wrote:                                                                                Re: quick filter, posted by deletoille on Thu Jan 14 17:14:21 2010                            Stefan Ritt wrote:                                                                         Re: quick filter, posted by Stefan Ritt on Thu Jan 14 18:55:12 2010                            deletoille wrote:                                                                         Re: quick filter, posted by Gabriele Sirri on Mon Jan 18 02:14:01 2010                            Stefan Ritt wrote:                                                            email message id, posted by george papalexis on Tue Jan 12 20:03:39 2010  We noticed some elog email messages were not showing up in our inboxes at random.  What we believe is happening is when a elog entry is created it is assigned a message id that the mail servers will use.  If a message is edited that same message id is used and some mail servers involved will ignore the duplicate message id.  We have also noticed when a elog entry is deleted the next entry created will assume the deleted entry message id       Re: email message id, posted by Stefan Ritt on Wed Jan 13 10:42:04 2010                            george papalexis wrote:                                            We noticed some elog email messages were not showing up in our inboxes at random.  What we believe          Re: email message id, posted by David Pilgram on Wed Jan 13 10:51:24 2010                            Stefan Ritt wrote:                                                                      Re: email message id, posted by Stefan Ritt on Wed Jan 13 11:00:57 2010                            David Pilgram wrote:                                                                   Re: email message id, posted by george papalexis on Fri Jan 15 17:36:54 2010                            Stefan Ritt wrote:                                                            Proxy Error, posted by David Pilgram on Wed Jan 13 10:59:44 2010  Having made one entry in the thread about message ID, I could neither edit the entry or add an additional reply without getting "Proxy Error" messages.  I've had this trouble on this forum before, a long time ago.  Perhaps it is connected with the html coding?       Re: Proxy Error, posted by David Pilgram on Wed Jan 13 11:15:10 2010  > Having made one entry in the thread about message ID, I could neither edit the entry or add an additional reply > without getting "Proxy Error" messages.  I've had this trouble on this forum before, a long time ago.  Perhaps > it is connected with the html coding?          Re: Proxy Error, posted by David Pilgram on Wed Jan 13 11:17:39 2010  > > Having made one entry in the thread about message ID, I could neither edit the entry or add an additional reply > > without getting "Proxy Error" messages.  I've had this trouble on this forum before, a long time ago.  Perhaps > > it is connected with the html coding?             Re: Proxy Error, posted by David Pilgram on Wed Jan 13 11:19:59 2010  > > > Having made one entry in the thread about message ID, I could neither edit the entry or add an additional reply > > > without getting "Proxy Error" messages.  I've had this trouble on this forum before, a long time ago.  Perhaps > > > it is connected with the html coding?                Re: Proxy Error, posted by Stefan Ritt on Wed Jan 13 11:34:51 2010  > I only got one email in response to the second entry of this thread, no email was received after the edit of the entry.  The > next email received was due to the third entry of this thread.                   Re: Proxy Error, posted by Stefan Ritt on Wed Jan 13 11:39:23 2010  > > I only got one email in response to the second entry of this thread, no email was received after the edit of the entry.  The > > next email received was due to the third entry of this thread. >                       Topic changed to: emails sent/received after edited entries., posted by David Pilgram on Wed Jan 13 12:00:04 2010  > > > I only got one email in response to the second entry of this thread, no email was received after the edit of the entry.  The > > > next email received was due to the third entry of this thread. > >                          Topic changed to: emails sent/received after edited entries., posted by Stefan Ritt on Wed Jan 13 12:18:54 2010  > > > > I only got one email in response to the second entry of this thread, no email was received after the edit of the entry.  The > > > > next email received was due to the third entry of this thread. > > >                             Topic changed to: emails sent/received after edited entries., posted by David Pilgram on Wed Jan 13 12:27:32 2010  > > > > > I only got one email in response to the second entry of this thread, no email was received after the edit of the entry.  The > > > > > next email received was due to the third entry of this thread. > > > >    Problem with CRYPT+SSL and elog command line entries, posted by Aaron Couture on Wed Jan 6 22:17:49 2010  I am in the process of setting up a new ELOG logbook.  I checked out rev2280 from svn.savannah.psi.ch.  I knew I wanted to encrypt passwords, so when I compiled, I used flags         Re: Problem with CRYPT+SSL and elog command line entries, posted by Aaron Couture on Thu Jan 7 21:22:09 2010                            I Aaron Couture wrote:                                            I have attached a possible patch--basically pirated from elogd.c  Because strlcpy needed          Re: Problem with CRYPT+SSL and elog command line entries, posted by Aaron Couture on Fri Jan 8 18:26:56 2010                            Aaron Couture wrote:                                                                         Re: Problem with CRYPT+SSL and elog command line entries, posted by Stefan Ritt on Tue Jan 12 12:31:20 2010                            I Aaron Couture wrote:                                            I have attached a possible patch--basically pirated from elogd.c  Because strlcpy needed   Any way to paste clipboard into entry?, posted by Erik Iverson on Thu Jan 7 21:41:43 2010  Is there any way to directly paste an image from a Windows clipboard into an elog entry page?  It's obvious for uploading a file, but many of my users say that they never make a file, they just want to paste in an image already onscreen.       Re: Any way to paste clipboard into entry?, posted by Stefan Ritt on Mon Jan 11 10:41:25 2010  > Is there any way to directly paste an image from a Windows clipboard into an elog entry page?  It's obvious > for uploading a file, but many of my users say that they never make a file, they just want to paste in an image > already onscreen.          Re: Any way to paste clipboard into entry?, posted by Erik Iverson on Mon Jan 11 16:44:23 2010  > > Is there any way to directly paste an image from a Windows clipboard into an elog entry page?  It's obvious > > for uploading a file, but many of my users say that they never make a file, they just want to paste in an image > > already onscreen.             Re: Any way to paste clipboard into entry?, posted by Stefan Ritt on Mon Jan 11 16:46:39 2010  > > > Is there any way to directly paste an image from a Windows clipboard into an elog entry page?  It's obvious > > > for uploading a file, but many of my users say that they never make a file, they just want to paste in an image > > > already onscreen.                Re: Any way to paste clipboard into entry?, posted by David Pilgram on Mon Jan 11 17:10:31 2010  > > > > Is there any way to directly paste an image from a Windows clipboard into an elog entry page?  It's obvious > > > > for uploading a file, but many of my users say that they never make a file, they just want to paste in an image > > > > already onscreen.   Each day new logbookfile, posted by Ben Weyn on Mon Jan 11 09:55:52 2010  I have installed Elog in a Windows-environment. It's working fine, but i get a new logbookfile each day. Is it possible to have all entries in 1 logbookfile?       Re: Each day new logbookfile, posted by Stefan Ritt on Mon Jan 11 10:00:14 2010                            Ben Weyn wrote:                                            I have installed Elog in a Windows-environment. It's working fine, but i get a new logbookfile each   elog start with number of entries are zero (0) for all logbook, posted by pirat sriyotha on Wed Dec 23 08:47:35 2009  hi sirs, am using freebsd, this morning i started elog and did a few record with no problem. just this afternoon when i enter firefox3 http://localhost:8000/, i got zero number of records for all of my logbooks.   Extend fields in ELOG, posted by Michael Dannmeyer on Tue Nov 10 13:20:43 2009  I want to extend the usage of ELOG and have 2 Questions: 1. Is it possible to have Fields which only appears if another selection is done? e.g. I create a new entry. This new entry has a type field. If I chose the Type "ABC" another field appears where the departemnt could be choosen. If I select Type "DEF" the       Re: Extend fields in ELOG, posted by Stefan Ritt on Tue Nov 10 14:21:48 2009                            Michael Dannmeyer wrote:                                            I want to extend the usage of ELOG and have 2 Questions:          Re: Extend fields in ELOG, posted by Michael Dannmeyer on Tue Dec 1 14:23:44 2009                            Stefan Ritt wrote:                                                            Re: Extend fields in ELOG, posted by Michael Dannmeyer on Tue Dec 8 13:23:58 2009                            Michael Dannmeyer wrote:                                                            Re: Extend fields in ELOG, posted by Stefan Ritt on Tue Dec 8 14:17:43 2009                            Michael Dannmeyer wrote:                                                                            Re: Extend fields in ELOG, posted by Michael Dannmeyer on Wed Dec 9 14:35:56 2009                            Stefan Ritt wrote:                                                                     Re: Extend fields in ELOG, posted by Stefan Ritt on Sat Dec 12 20:31:44 2009                            Michael Dannmeyer wrote:                                                            Elogd crashes when submitting replies, posted by Cliff Shaw on Thu Dec 10 16:05:59 2009  Hi Stefan, I recently installed the latest Elog 2.7.8 revision 2277 after running Elog 2.7.7 revision 2246 for several months without any problems. However once I submit an entry by using the Reply command Elog crashes and Windows XP reports an error message screen. This also stops the elogd service.       Re: Elogd crashes when submitting replies, posted by Stefan Ritt on Sat Dec 12 20:30:35 2009                            Cliff Shaw wrote:                                            Hi Stefan,   401 Authorization problem, posted by Ian Stokes-Rees on Fri Dec 11 18:53:17 2009  Grrr.  Forgetting to pick an icon means my message was blasted. I have installed elog 2.7.8 and it is running.  When I connect to it and get a login window, I am always denied.  If I remove the passwords, then I can login with no password information.  I have tried both command line for setting passwords and directly in the elogd.cfg file.       Re: 401 Authorization problem, posted by Stefan Ritt on Sat Dec 12 20:18:46 2009                            Ian Stokes-Rees wrote:                                            Grrr.  Forgetting to pick an icon means my message was blasted.   2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5, posted by David Spindler on Mon Nov 2 21:23:38 2009  I upgraded 2.7.5 rev 2175 to 2.7.7 rev 2246 last Thursday. I tested it with several logbooks with no problems. However I received a rep[ort today that it was down. I discovered whenever I tried to open a logbook entitled "Equipment Reservation" in the folder "EquipmentReservations" Elog would crash. I checked the elog.log file with no entries in it other than showing when it was restarted. I backed up to 2.7.5 and had no porblems       Re: 2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5, posted by Stefan Ritt on Tue Nov 3 09:04:34 2009                            David Spindler wrote:                                            I upgraded 2.7.5 rev 2175 to 2.7.7 rev 2246 last Thursday. I tested it with several logbooks with no          Re: 2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5, posted by David Spindler on Wed Nov 11 19:45:19 2009                            Stefan Ritt wrote:                                                                         Re: Re: 2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5, posted by Heinzmann on Tue Nov 17 19:31:46 2009                            David Spindler wrote:                                                                      Re: 2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5, posted by David Spindler on Fri Nov 20 19:32:22 2009                            David Spindler wrote:                                                                         Re: 2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5, posted by David Spindler on Mon Dec 7 21:25:23 2009                            David Spindler wrote:                                                                               Re: 2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5, posted by David Spindler on Thu Dec 10 18:12:19 2009                            David Spindler wrote:                                                                               Re: 2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5, posted by Stefan Ritt on Thu Dec 10 19:06:18 2009                            David Spindler wrote:                                                Certificate Error, posted by John Lemko on Tue Dec 8 18:57:31 2009  Is there any documentation I can go through that explains how to remove the Certificate Error I am getting as shown in the attachment.  I have tried creating my own certificate and putting it in the elog ssl folder but that just prevented the elog service from starting.  Any help would be greatly appreciated.  Thanks.       Re: Certificate Error, posted by Gerhard Schneider on Tue Dec 8 19:22:06 2009  How did you create the certificate? Are you running eLog on a server with more than one host name (CNAME entries) and are you pointing to your eLog          Re: Certificate Error, posted by John Lemko on Tue Dec 8 19:34:11 2009  >  > How did you create the certificate? > Are you running eLog on a server with more than one host name (CNAME entries) and are you pointing to your eLog             Re: Certificate Error, posted by Gerhard Schneider on Tue Dec 8 19:47:56 2009  >  > The certificate that is on there right now is the one that gets created when you install elogs.  I have tried  > creating one with a windows server 2008 box with the CA role installed.  The certificate is created without issue                 Re: Certificate Error, posted by John Lemko on Tue Dec 8 22:06:47 2009  > >  > > The certificate that is on there right now is the one that gets created when you install elogs.  I have tried  > > creating one with a windows server 2008 box with the CA role installed.  The certificate is created without issue              Re: Certificate Error, posted by Stefan Ritt on Tue Dec 8 20:16:59 2009  > The certificate that is on there right now is the one that gets created when you install elogs.  I have tried  > creating one with a windows server 2008 box with the CA role installed.  The certificate is created without issue  > and I can install it on the server but when I try to restart the elog service it wont start until I put the                 Re: Certificate Error, posted by John Lemko on Tue Dec 8 21:57:37 2009  > > The certificate that is on there right now is the one that gets created when you install elogs.  I have tried  > > creating one with a windows server 2008 box with the CA role installed.  The certificate is created without issue  > > and I can install it on the server but when I try to restart the elog service it wont start until I put the    elogd keeps crashing, any thoughts?, posted by Allen on Thu Dec 3 20:25:50 2009  We are trying to track down an issue where elogd just stops, and I cannot seem to find a cause.   In the logs, I see:       Re: elogd keeps crashing, any thoughts?, posted by Stefan Ritt on Fri Dec 4 23:45:56 2009                            Allen wrote:                                           We are trying to track down an issue where elogd just stops, and I cannot seem to find a cause.   default Status descending, posted by Terry Shuck on Tue Dec 1 14:20:04 2009  Is there a way to configure ELOG to default to the Status column in descending order rather than the Date in descending order? Thanks       Re: default Status descending, posted by Stefan Ritt on Tue Dec 1 14:22:28 2009                            Terry Shuck wrote:                                            Is there a way to configure ELOG to default to the Status column in descending order rather than the          Re: default Status descending, posted by Terry Shuck on Tue Dec 1 15:11:19 2009  Thanks for the quick response. This works. I noticed that the Dates aren't descending, is there a way to have the dates descending while sorting Status? Thanks again!             Re: default Status descending, posted by Stefan Ritt on Wed Dec 2 11:57:09 2009                            Terry Shuck wrote:                                            Thanks for the quick response. This works. I noticed that the Dates aren't descending, is there   "Reply to" Author in this forum, posted by David Pilgram on Thu Nov 26 14:27:27 2009  Hi Stefan, This has happened twice on this forum now, starting from Mon 23rd November.       Re: "Reply to" Author in this forum, posted by Stefan Ritt on Thu Nov 26 17:42:02 2009  > Hi Stefan, >  > This has happened twice on this forum now, starting from Mon 23rd November.          Re: "Reply to" Author in this forum, posted by David Pilgram on Thu Nov 26 20:37:02 2009  > > Hi Stefan, > >  > > This has happened twice on this forum now, starting from Mon 23rd November.   elogd.cfg for this forum, posted by Bertram Metz on Tue Nov 24 10:38:26 2009  Hi Stefan, I'm interested in the current configuration file for this discussion forum. Could you please post it to the       Re: elogd.cfg for this forum, posted by Bertram Metz on Thu Nov 26 13:12:23 2009  > Hi Stefan, >  > I'm interested in the current configuration file for this discussion forum. Could you please post it to the   Attachments and images of attachments, posted by David Pilgram on Mon Nov 23 11:53:22 2009  Hi Stefan, I attached a 12 page (22kB) pdf file - no images - to an entry, but elog only converted the first 8 pages to       Re: Attachments and images of attachments, posted by David Pilgram on Mon Nov 23 12:32:14 2009  > Hi Stefan, >  > I attached a 12 page (22kB) pdf file - no images - to an entry, but elog only converted the first 8 pages to          Re: Attachments and images of attachments, posted by David Pilgram on Mon Nov 23 13:17:53 2009  > > Hi Stefan, > >  > > I attached a 12 page (22kB) pdf file - no images - to an entry, but elog only converted the first 8 pages to   Export and save problem with IE7, posted by soren poulsen on Wed Jun 17 22:01:57 2009  Hi Would it be possible to use the "Export to:" function with IE7 on the Forum logbook, and save the logbook. I can do the export but saving the file with IE7 does not work. Saving the file with Firefox, Chrome, Safari works.       Re: Export and save problem with IE7, posted by Stefan Ritt on Thu Jun 25 15:37:14 2009                            soren poulsen wrote:                                            Hi          Re: Re: Export and save problem with IE7, posted by soren poulsen on Wed Nov 18 13:54:25 2009                            Stefan Ritt wrote:                                                            Elog & SSL Export to CSV , Problem, posted by Chuck Brost on Wed Sep 16 16:37:35 2009    We use eLOG with IE. Once we turned on SSL, it is no longer possible to "Export to CSV" and save the output.       Re: Elog & SSL Export to CSV , Problem, posted by Stefan Ritt on Wed Sep 16 23:54:12 2009                            Chuck Brost wrote:                                                       Re: Elog & SSL Export to CSV , Problem, posted by Chuck Brost on Thu Sep 17 18:31:44 2009                            Stefan Ritt wrote:                                                            Re: Elog & SSL Export to CSV , Problem, posted by Stefan Ritt on Thu Sep 17 18:44:52 2009                            Chuck Brost wrote:                                             Ah, now this is humorous, when the client first came to me, that was almost exactly the work around                Re: Elog & SSL Export to CSV , Problem, posted by Chuck Brost on Thu Sep 17 20:46:51 2009                            Stefan Ritt wrote:                                                                  Re: Elog & SSL Export to CSV , Problem, posted by soren poulsen on Sun Nov 8 23:25:25 2009                            Chuck Brost wrote:                                                                               Re: Elog & SSL Export to CSV , Problem, posted by Stefan Ritt on Tue Nov 10 14:56:07 2009                            Chuck Brost wrote:                                            Stefan, would it be possible to make the following change so that the document is not cached and at                         Re: Re: Elog & SSL Export to CSV , Problem, posted by soren poulsen on Wed Nov 18 13:51:55 2009                            Stefan Ritt wrote:                                                            Subscribe to logbooks: Linux Demo, Database, etc.. regarding enable automatic email notifications , posted by Heinzmann on Mon Nov 16 23:04:25 2009  Hello Stefan, how can I activate the part like: Subscribe to logbooks: Linux Demo, Database, etc.. regarding enable automatic email notifications like below       Re: Subscribe to logbooks: Linux Demo, Database, etc.. regarding enable automatic email notifications , posted by Stefan Ritt on Tue Nov 17 08:01:48 2009                            Heinzmann wrote:                                            Hello Stefan,          Re: Re: Subscribe to logbooks: Linux Demo, Database, etc.. regarding enable automatic email notifications , posted by Heinzmann on Tue Nov 17 11:01:50 2009                            Stefan Ritt wrote:                                                                      Re: Re: Re: Subscribe to logbooks: Linux Demo, Database, etc.. regarding enable automatic email notifications , posted by Stefan Ritt on Tue Nov 17 11:24:59 2009                            Heinzmann wrote:                                                                         Re: Re: Re: Re: Subscribe to logbooks: Linux Demo, Database, etc.. regarding enable automatic email notifications , posted by Heinzmann on Tue Nov 17 19:04:16 2009                            Stefan Ritt wrote:                                                            Show dropdown menus as a function of selecting an option in another dropdown menu, posted by Diogo Alves on Thu Nov 5 10:17:19 2009  Hello, I'm having some difficulties in having a tasks manager up and running. The total attributes list is:   - Attributes = List, Project, SubProject, SubSubProject, Title, Priority, Context, Status, Due Date, Start Date, Alarm, Repeat   I would like to have the interface display the following attribute when I click "New":   - List (Options = Personal,       Re: Show dropdown menus as a function of selecting an option in another dropdown menu, posted by Stefan Ritt on Fri Nov 13 17:03:03 2009                            Diogo Alves wrote:                                            Hello,             I'm having some difficulties in having a tasks manager up and running.          Re: Re: Show dropdown menus as a function of selecting an option in another dropdown menu, posted by Diogo Alves on Tue Nov 17 16:44:43 2009                            Stefan Ritt wrote:                                                            List View: Attachments icon, posted by Steve Williamson on Fri Nov 13 14:25:52 2009  It is occasionally convenient to be able to put the Edit button at the beginning of the line in list view, e.g. when pages are wider than the screen it saves having to scroll across to find it.  Would it be possible to do something similar with the Attachments button? regards       Re: List View: Attachments icon, posted by Stefan Ritt on Fri Nov 13 14:31:45 2009                            Steve Williamson wrote:                                            It is occasionally convenient to be able to put the Edit button at the beginning of the line in list          Re: List View: Attachments icon, posted by David Pilgram on Fri Nov 13 15:06:37 2009  Hi Stefan and Steve, Do you mean putting the paperclip icon to the left of the 'Thread display' (such as next to the emoticons and             Re: List View: Attachments icon, posted by Stefan Ritt on Fri Nov 13 15:10:47 2009  [Quote=David Pilgram]Or make it something to configure, thus ruining Stefan's weekend and confusing the rest of us ;-)[/quote] :D Yeahh, you got the point!                Re: List View: Attachments icon, posted by David Pilgram on Fri Nov 13 15:13:56 2009  [quote="Stefan Ritt"][Quote=David Pilgram]Or make it something to configure, thus ruining Stefan's weekend and confusing the rest of us ;-)[/quote] :D Yeahh, you got the point!             Re: List View: Attachments icon, posted by Stefan Ritt on Fri Nov 13 15:14:38 2009  [Quote=David Pilgram]Do you mean putting the paperclip icon to the left of the 'Thread display' (such as next to the  emoticons and other stuff we can put in this forum)?[/quote]                Re: List View: Attachments icon, posted by David Pilgram on Fri Nov 13 15:21:03 2009  [quote="Stefan Ritt"][Quote=David Pilgram]Do you mean putting the paperclip icon to the left of the 'Thread display' (such as next to the  emoticons and other stuff we can put in this forum)?[/quote]                   Re: Re: List View: Attachments icon, posted by Steve Williamson on Tue Nov 17 12:29:24 2009  Thanks for all of the contributions - all I meant in my original suggestion was that I'd like to be able to define which column(s) should hold the Attachments paperclip in the Full and Summary List Views, which I use all the time, to reduce the need to scroll horizontally on every page.  This would be similar to being able to specify where the Edit control appears by specifying the Edit attribute in the "List Display" list.                      Re: Re: Re: List View: Attachments icon, posted by Stefan Ritt on Tue Nov 17 13:44:04 2009  [quote="Steve Williamson"]Thanks for all of the contributions - all I meant in my original suggestion was that I'd like to be able to define which column(s) should hold the Attachments paperclip in the Full and Summary List Views, which I use all the time, to reduce the need to scroll horizontally on every page.  This would be similar to being able to specify where the Edit control appears by specifying the Edit attribute in the "List Display" list.   "Collapse to last = 1" problem when reply twice to the same entry, posted by Gabriele Sirri on Sat Oct 24 01:10:24 2009  Hello. Please look at the entry 66525 of this forum (just 5 thread before this one):       Re: "Collapse to last = 1" problem when reply twice to the same entry, posted by David Pilgram on Thu Oct 29 20:58:59 2009  > Hello. >  > Please look at the entry 66525 of this forum (just 5 thread before this one):       Re: "Collapse to last = 1" problem when reply twice to the same entry, posted by Stefan Ritt on Mon Nov 16 13:46:38 2009  > Hello. >  > Please look at the entry 66525 of this forum (just 5 thread before this one):   Problems zooming elog pages in Internet Explorer - a possible fix, posted by Richard Stamper on Wed Nov 4 00:58:00 2009  Internet Explorer fails to display correctly some aspects of pages generated by elog when the zoom functionality is used (Ctrl + and Ctrl -).  This is really a bug in the IE renderer rather than elog, but since IE can be persuaded to do better relatively easily it might be worth making some minor changes to make elog more robust when used with the buggy Microsoft browser.       Re: Problems zooming elog pages in Internet Explorer - a possible fix, posted by Stefan Ritt on Fri Nov 13 15:54:21 2009                            Richard Stamper wrote:                                            Internet Explorer fails to display correctly some aspects of pages generated by elog when the zoom functionality   fckeditor is not running, posted by Heinzmann on Wed Nov 4 01:49:30 2009  Hello Stephan, the fckeditor is not running. I have installed elog 2.7.7 rev. 2246 on windows xp.       Re: fckeditor is not running, posted by Heinzmann on Wed Nov 4 23:53:58 2009                            Heinzmann wrote:                                            Hello Stephan,          Re: fckeditor is not running, posted by Stefan Ritt on Fri Nov 13 15:40:05 2009                            Heinzmann wrote:                                            I have found the problem:   Paper clip showing attachment not always present, posted by David Pilgram on Wed Nov 11 19:53:57 2009  Hi Stefan, I must have seen this before, but only just "noticed" it.       Re: Paper clip showing attachment not always present, posted by David Pilgram on Fri Nov 13 10:57:03 2009  I may have made this sound as if the issue occurs if the first entry in a thread has an attachment; in fact it happens whether or not there is an attachment to the first entry.       Re: Paper clip showing attachment not always present, posted by Stefan Ritt on Fri Nov 13 15:07:57 2009  > It would appear to be a bug that the attachment icon does not appear in the threaded display (for any entry > other than the initial one).          Re: Paper clip showing attachment not always present, posted by David Pilgram on Fri Nov 13 15:10:34 2009  Thanks Stefan! (But I'll wait and see if you do anything about Steve's point...so I'll download "after work"!).   Dynamic attribute values, posted by Steve Williamson on Wed Oct 7 16:17:34 2009  Hi I'm doing something wrong but can't work out what!   I've created a new logbook with some date attributes that need to keep in step, e.g. one date ("receipt date") is set to the date the       Re: Dynamic attribute values, posted by Stefan Ritt on Tue Nov 10 15:00:15 2009                            Steve Williamson wrote:                                            Hi          Re: Dynamic attribute values, posted by Steve Williamson on Fri Nov 13 14:28:25 2009                            Stefan Ritt wrote:                                                            Automatically generated incrementing tags (#), posted by soren poulsen on Wed Oct 14 16:31:46 2009  Hi, I am using the # character to generate automatically incrementing numbers for new messages. My issue is that # is evaluated when you hit "New" but E-log is only aware of the new value being used when you hit "Submit".       Re: Automatically generated incrementing tags (#), posted by soren poulsen on Wed Oct 14 16:46:57 2009                            soren poulsen wrote:                                            Hi,          Re: Automatically generated incrementing tags (#), posted by soren poulsen on Mon Oct 26 15:43:55 2009                            soren poulsen wrote:                                                                      Re: Automatically generated incrementing tags (#), posted by soren poulsen on Sun Nov 8 23:29:35 2009                            soren poulsen wrote:                                                                      Re: Automatically generated incrementing tags (#), posted by Stefan Ritt on Tue Nov 10 14:42:11 2009                            soren poulsen wrote:                                                                         Re: Automatically generated incrementing tags (#), posted by soren poulsen on Tue Nov 10 21:36:21 2009                            Stefan Ritt wrote:                                                  Reply on item not allowed moving item to other logbook, posted by Eddy Berends on Mon Nov 9 11:50:05 2009  After I moved an item from one logbook to another one I cannot reply on this item anymore. When the submit button is clicked it returns: Submit not allowed This eLog server running Linux is sync'd with an server running Windows XP.       Re: Reply on item not allowed moving item to other logbook, posted by Stefan Ritt on Tue Nov 10 14:24:26 2009                            Eddy Berends wrote:                                            After I moved an item from one logbook to another one I cannot reply on this item anymore.   Export Text to a csv File, posted by Michael Dannmeyer on Tue Nov 10 12:50:48 2009  Hello, is it possible to export the Text Field and the entries in this field to a csv file? If yes, what are the settings to do this? Regards       Re: Export Text to a csv File, posted by Stefan Ritt on Tue Nov 10 12:54:47 2009                            Michael Dannmeyer wrote:                                            Hello,          Re: Export Text to a csv File, posted by Michael Dannmeyer on Tue Nov 10 13:06:26 2009                            Stefan Ritt wrote:                                                  width of the Text column in the summary list view, posted by Fabio Rossi on Fri Nov 6 12:49:22 2009  I have "Summary lines = 1" in the config file. The first line visualized in the summary list, in the Text column, is truncated. I'm using the default style. Which is the way to set the number of character displayed?       Re: width of the Text column in the summary list view, posted by Stefan Ritt on Fri Nov 6 13:46:38 2009                            Fabio Rossi wrote:                                            I have "Summary lines = 1" in the config file. The first line visualized in the summary list,          Re: width of the Text column in the summary list view, posted by Fabio Rossi on Fri Nov 6 18:08:20 2009                            Stefan Ritt wrote:                                                            Access control, group level, posted by Niklas on Mon Nov 2 11:17:20 2009  Hi elog experts =)   Anyone know if it's possible to have access control per group-level?       Re: Access control, group level, posted by Stefan Ritt on Tue Nov 3 09:24:15 2009                            Niklas wrote:                                           Hi elog experts =)   Emails generated by *this* discussion forum, posted by David Pilgram on Mon Nov 2 11:52:08 2009  Hi Stefan, After 21.Oct, all the emails sent out by this discussion form now are addressed to       Re: Emails generated by *this* discussion forum, posted by Stefan Ritt on Tue Nov 3 09:14:14 2009  > Hi Stefan, >  > After 21.Oct, all the emails sent out by this discussion form now are addressed to   elog crashes with a long thread., posted by David Pilgram on Thu Oct 29 20:48:41 2009  Hi Stefan, I have a thread of 70 entries.  I added another entry, which was saved, but elog crashed.   User authorization file corruption, posted by soren poulsen on Fri Sep 18 07:39:02 2009  Hi, Here is what happens (I think) if E-log encounters a full file system where it keeps the user authorization file: 1. When a user connects, E-log will make a backup of the file. The backup will be corrupt since the file system is full.       Re: User authorization file corruption, posted by Stefan Ritt on Fri Oct 16 12:17:15 2009                            soren poulsen wrote:                                            Hi,          Re: User authorization file corruption, posted by soren poulsen on Mon Oct 26 10:15:20 2009                            Stefan Ritt wrote:                                                            Option list length, posted by soren poulsen on Fri Sep 18 07:32:38 2009  Hi, I use the following attribute definition: Options <attribute> = <list>        Re: Option list length, posted by Stefan Ritt on Fri Oct 16 12:21:45 2009                            soren poulsen wrote:                                            Hi,          Re: Option list length, posted by soren poulsen on Mon Oct 26 10:13:54 2009                            Stefan Ritt wrote:                                                            feature req.: identify ELOG web pages via META element, posted by Bill Pier on Wed Oct 7 01:31:05 2009    * Withdrawn * The HTML layout produced by elogd is horrendous to deal with programmatically; I give up.         Re: feature req.: identify ELOG web pages via META element, posted by Stefan Ritt on Wed Oct 21 19:06:59 2009                            Bill Pier wrote:                                                chain.crt, posted by Gerhard Schneider on Thu Sep 3 21:55:52 2009  Like many educational institutions we get "educational certificates" that are chain certificates.. With apache the full certificate chain is working as expected..       Re: chain.crt, posted by Stefan Ritt on Fri Sep 4 08:33:16 2009  > Like many educational institutions we get "educational certificates" that are chain certificates.. >  > With apache the full certificate chain is working as expected..       Re: chain.crt, posted by Gerhard Schneider on Wed Oct 7 07:56:52 2009  > Like many educational institutions we get "educational certificates" that are chain certificates.. >   > only shows:    no "submit changes" pop-up with HTML editor, posted by Devin Bougie on Thu Sep 10 21:43:29 2009  When locks are enabled, users should see a pop-up window asking them to submit an entry if they edit an entry but then go away from that page or  close the browser without submitting the changes.  However, it only appears as though this works when using the plain or ELCode editors.  When  using the HTML editor, no such pop-up appears.       Re: no "submit changes" pop-up with HTML editor, posted by Stefan Ritt on Thu Sep 17 18:18:06 2009  > When locks are enabled, users should see a pop-up window asking them to submit an entry if they edit an entry but then go away from that page or  > close the browser without submitting the changes.  However, it only appears as though this works when using the plain or ELCode editors.  When  > using the HTML editor, no such pop-up appears.   Elog stopped working, posted by Gillian Sabberton on Tue Sep 8 14:36:10 2009  We have been running elog for a couple of years now and this morning it stopped working. We have tried to rstart it and it says successful start but still does not run, when doing a restart it says stop failed start success. Does anyone have any ideas.       Re: Elog stopped working, posted by Stefan Ritt on Tue Sep 8 14:55:41 2009                            Gillian Sabberton wrote:                                            We have been running elog for a couple of years now and this morning it stopped working.          Re: Elog stopped working, posted by Gillian Sabberton on Tue Sep 8 14:59:30 2009                            Stefan Ritt wrote:                                                            Re: Elog stopped working, posted by Gillian Sabberton on Mon Sep 14 13:04:57 2009                            Gillian Sabberton wrote:                                                         Re: Elog stopped working, posted by Gillian Sabberton on Mon Sep 14 13:05:35 2009                            Gillian Sabberton wrote:                                               Supress Email on Reply, posted by mike cianci on Wed Sep 9 08:16:22 2009  The way I have ELOG configured it sends an email to supervisors based on which "Department " (attribute) was selected. Problem is that when the supervisor replies the department is still selected and it sends a second email to the supervisor. Is there any way to supress the emails (automatically) on "Reply"?       Re: Supress Email on Reply, posted by Stefan Ritt on Thu Sep 10 16:55:08 2009                            mike cianci wrote:                                            The way I have ELOG configured it sends an email to supervisors based on which "Department "   ELcode in Summary Text, posted by Dan on Fri Sep 4 20:44:32 2009  Hello,    Thank you for such a great piece of software!       Re: ELcode in Summary Text, posted by Stefan Ritt on Mon Sep 7 15:18:39 2009  > Hello, >  >    Thank you for such a great piece of software!          Re: ELcode in Summary Text, posted by Dan on Tue Sep 8 22:56:02 2009  That would be a lot of effort for very little gain. I appreciate your detailed response.  Thank you,   Use eLOG with Google Chrome, posted by Robert-Jan Schrijvers on Tue Sep 8 10:46:22 2009  Hi Stephan, one of the eLOG users at our company, has problems using eLOG in combination with Google Chrome (version 2.0.172.43), log in gives no problem, when selecting the appropiate department, he get's the following error:       Re: Use eLOG with Google Chrome, posted by Stefan Ritt on Tue Sep 8 14:44:33 2009                            Robert-Jan Schrijvers wrote:                                            Hi Stephan,   Use eLOG with Google Chrome, posted by Robert-Jan Schrijvers on Tue Sep 8 10:47:08 2009  Hi Stefan, one of the eLOG users at our company, has problems using eLOG in combination with Google Chrome (version 2.0.172.43), log in gives no problem, when selecting the appropiate department, he get's the following error:   Use eLOG with Google Chrome, posted by Robert-Jan Schrijvers on Tue Sep 8 10:46:46 2009  Hi Stephan, one of the eLOG users at our company, has problems using eLOG in combination with Google Chrome (version 2.0.172.43), log in gives no problem, when selecting the appropiate department, he get's the following error:   multiple keyword search - regular expression, posted by Johannes Liegl on Wed Aug 19 11:49:37 2009  Dear Sirs, searching for keywords regular expression becomes very long. Are there any other type easy multiple keyword search supported. For example a keyword search like keyword1 & keyword2 results in different output than a keyword search like keyword2 & keyword1. A simple keyword search like       Re: multiple keyword search - regular expression, posted by Stefan Ritt on Thu Sep 3 18:14:26 2009                            Johannes Liegl wrote:                                            Dear Sirs,          Re: multiple keyword search - regular expression, posted by Yoshio Imai on Fri Sep 4 13:59:19 2009  Maybe there is a simple way. If I understand it correctly, the entries are accepted/rejected for inclusion in the search result list based on one call to [I]regexec[/I]. In order to search for N keywords, you could replace this by a loop of N calls to [I]regexec[/I], and only accept the entry if all of them find a match.             Re: multiple keyword search - regular expression, posted by Stefan Ritt on Fri Sep 4 14:07:31 2009  [quote="Yoshio Imai"]Maybe there is a simple way. If I understand it correctly, the entries are accepted/rejected for inclusion in the search result list based on one call to [I]regexec[/I]. In order to search for N keywords, you could replace this by a loop of N calls to [I]regexec[/I], and only accept the entry if all of them find a match.[/quote]   Fix text prevents user from editing text during creation, instead of just edit, posted by Allen on Mon Aug 24 21:47:14 2009  When we set Fix text = 1, according to the syntax, this should prevent users from modifying the text field during an edit, but it looks like it is blocking access at both time of edit and creation, meaning you can never add anything to it.  Is that the intended functionality?       Re: Fix text prevents user from editing text during creation, instead of just edit, posted by Stefan Ritt on Fri Sep 4 09:48:55 2009                            Allen wrote:                                           When we set Fix text = 1, according to the syntax, this should prevent users from modifying the text field during an edit, but it looks like   Time Display Format, posted by james Goedsir on Tue Sep 1 04:15:57 2009  My Time field is displayed i  a 12 Hour format I would like to change it to 24 Hours, can someone advised how it can be done       Re: Time Display Format, posted by james Goedsir on Wed Sep 2 09:39:20 2009                            james Goedsir wrote:                                            My Time field is displayed i  a 12 Hour format I would like to change it to 24 Hours, can someone   fckeditor update, posted by Arno Teunisse on Tue Aug 25 21:08:51 2009  Hello Just a few fckeditor related questions. How do elog versions and fckeditor versions relate. ? Can I just drop another version of the fckeditor over an other version?  What things should I consider when doing so ?       Re: fckeditor update, posted by Stefan Ritt on Mon Aug 31 11:22:20 2009                            Arno Teunisse wrote:                                            Hello   Multiple keyword search, posted by Yoichi Aso on Wed Jan 14 19:52:04 2009  Hi, I have a question regarding how to perform a multiple-keyword search. For example, when I want to find entries which contain two keywords "abc" and "def" in the body text but in an unknown order,         Re: Multiple keyword search, posted by Johannes Liegl on Wed Aug 19 11:54:52 2009  [quote="Yoichi Aso"]Hi, I have a question regarding how to perform a multiple-keyword search. For example, when I want to find entries which contain two keywords "abc" and "def" in the body text but in an unknown order,     Logbook Parser, posted by Alan Grant on Tue Aug 11 00:20:11 2009  We are exploring whether it's possible/feasible to import ELog logbooks into a another database for special purposes (plotting/statisical, etc). Target database is TBD (perhaps Access). Does anyone have or know of a logbook parser program? From cut/pasting into, for example, Excel, it does appear that the data fields are already       Re: Logbook Parser, posted by Stefan Ritt on Tue Aug 11 08:29:23 2009                            Alan Grant wrote:                                            We are exploring whether it's possible/feasible to import ELog logbooks into a another          Re: Logbook Parser, posted by Steve Williamson on Tue Aug 11 13:02:22 2009                            Stefan Ritt wrote:                                                                      Re: Logbook Parser, posted by Stefan Ritt on Tue Aug 11 13:25:48 2009                            Steve Williamson wrote:                                            excuse my butting in ...  I've found the exports useful in the past - however, is is possible to                Re: Logbook Parser, posted by Steve Williamson on Wed Aug 12 14:40:52 2009                            Stefan Ritt wrote:                                                                      Re: Logbook Parser, posted by Alan Grant on Tue Aug 11 16:25:28 2009                            Steve Williamson wrote:                                               Comment on: Alphabetize Quick Option filter, posted by David Pilgram on Mon Aug 10 21:07:15 2009  (For some reason I could not add this in Dennis's thread.) I like this new feature, BUT       Re: Comment on: Alphabetize Quick Option filter, posted by David Pilgram on Mon Aug 10 21:19:50 2009  I've just noticed that it has also sorted another Option, which are selected as radio buttons.  Again, this is a list which has a natural - again, in this case, chronological - order.       Re: Comment on: Alphabetize Quick Option filter, posted by Stefan Ritt on Tue Aug 11 08:38:56 2009  Ok, that makes sense, so I changed it to Sort Attribute Options Status = 1          Re: Comment on: Alphabetize Quick Option filter, posted by David Pilgram on Tue Aug 11 10:07:08 2009  Thanks Stefan!  Works great. > Ok, that makes sense, so I changed it to             Re: Comment on: Alphabetize Quick Option filter, posted by Dennis Seitz on Tue Aug 11 17:46:33 2009  Yes, many thanks, Stefan, from me, too! It's really great that you respond so quickly to requests and suggestions. And thanks to David for the fine tuning, great suggestion.   List Option, posted by Alan Grant on Tue Aug 11 08:10:21 2009  Hello Stefan. Currently this is defined as a maximum of 100 literals in the cfg file. I would like to see the option to reference an external text file as input for this.        Re: List Option, posted by Stefan Ritt on Tue Aug 11 08:33:32 2009                            Alan Grant wrote:                                            Currently this is defined as a maximum of 100 literals in the cfg file. I would like   Pre-populate Attachments in URL, posted by Erik Iverson on Thu Aug 6 22:29:12 2009  Is there a way to pre-populate the new entry window with one or more attachments?  Per the documentation, this is easy to do with attributes, i.e., http://localhost:8070/demo/?cmd=New&pauthor=joe&ptype=Info as a URL or bookmark will do it.  I'd like to do the same thing with attachments, for example http://localhost:8070/demo/?cmd=New&pauthor=joe&ptype=Photograph&attfile1=picture1.jpg&attfile2=picture2.jpg might prepopulate two attachments, giving me an edit window all ready to enter the brief description represented by the two pictures.        Re: Pre-populate Attachments in URL, posted by Stefan Ritt on Fri Aug 7 08:36:19 2009  [quote="Erik Iverson"]Is there a way to pre-populate the new entry window with one or more attachments?  Per the documentation, this is easy to do with attributes, i.e., http://localhost:8070/demo/?cmd=New&pauthor=joe&ptype=Info as a URL or bookmark will do it.  I'd like to do the same thing with attachments, for example http://localhost:8070/demo/?cmd=New&pauthor=joe&ptype=Photograph&attfile1=picture1.jpg&attfile2=picture2.jpg might prepopulate two attachments,   HTML in attribute values, posted by soren poulsen on Thu Aug 6 11:40:11 2009  Hi, I am using syntax like (from the doc): Display Telephone = <a href="http://any.company.com/telbook.cgi?search=$Name">$Name's telephone number</a> Until yesterday       Re: HTML in attribute values, posted by soren poulsen on Thu Aug 6 11:53:29 2009                            soren poulsen wrote:                                            Hi,          Re: HTML in attribute values, posted by Stefan Ritt on Thu Aug 6 12:11:50 2009                            soren poulsen wrote:                                                                      Re: HTML in attribute values, posted by soren poulsen on Thu Aug 6 13:09:50 2009                            Stefan Ritt wrote:                                                            init_resize sometimes not defined, posted by Richard Stamper on Wed Aug 5 01:07:04 2009  Under some circumstances the New/Edit entry screen can invoke the init_resize() function in the onload handler for the <body> tag, but the init_resize() function is not defined.  In my case there is a log where the encoding is plain text (Default encoding = 1) and the message height is restricted (Message height = 4).  Creating or editing entries in this log generates warnings in the Firefox error console and alert boxes in IE about init_resize being       Re: init_resize sometimes not defined, posted by Stefan Ritt on Wed Aug 5 13:36:44 2009                            Richard Stamper wrote:                                            Under some circumstances the New/Edit entry screen can invoke the init_resize() function in the onload   Problems when trying to set up mirror elog , posted by Ricardo Goncalo on Tue Jul 28 19:14:23 2009  Hi, I'm trying to synchronize an elog in my computer with my personal elog in my institute's server. The two elogd.cfg files are necessarily different since the elog in my institute is for many people's elogs, so I'm not completely sure this is supposed to work.         Re: Problems when trying to set up mirror elog , posted by Stefan Ritt on Wed Jul 29 09:33:16 2009                            Ricardo Goncalo wrote:                                            Any ideas of what I'm doing wrong?           Re: Problems when trying to set up mirror elog , posted by Ricardo Goncalo on Wed Jul 29 09:59:02 2009                            Stefan Ritt wrote:                                                                      Re: Problems when trying to set up mirror elog , posted by Stefan Ritt on Wed Jul 29 10:17:49 2009                            Ricardo Goncalo wrote:                                            Ok, to see if I understand. You mean setting SSL = 0 in my cfg file and leaving the rest as it is, right?                Re: Problems when trying to set up mirror elog , posted by Ricardo Goncalo on Wed Jul 29 10:33:53 2009                            Stefan Ritt wrote:                                                                            Re: Problems when trying to set up mirror elog , posted by Ricardo Goncalo on Thu Jul 30 17:35:50 2009                            Ricardo Goncalo wrote:                                                                               Re: Problems when trying to set up mirror elog , posted by Stefan Ritt on Mon Aug 3 10:00:18 2009                            Ricardo Goncalo wrote:                                            Retrieving entries from "https://www.pp.rhul.ac.uk:8080/ATLAS Trigger"...                         Re: Problems when trying to set up mirror elog , posted by Ricardo Goncalo on Tue Aug 4 10:48:26 2009                            Stefan Ritt wrote:                                                                                     Re: Problems when trying to set up mirror elog , posted by Stefan Ritt on Tue Aug 4 11:22:18 2009                            Ricardo Goncalo wrote:                                                            synchronization, posted by lance on Wed Jun 17 09:05:27 2009  We are running elog across two sites and synchronizing every four hours on change only. There are about 100 entries per day of which most are just one line entries. However this is taking up to 9 mins and during the replication process the server gives us an "unavailable" error. We are using a T1 across the sites so bandwidth should not be an issue, I am confused as to why this takes so long.       Re: synchronization, posted by lance on Fri Jun 19 09:44:02 2009                            lance wrote:                                            We are running elog across          Re: synchronization, posted by Stefan Ritt on Thu Jun 25 16:30:24 2009                            lance wrote:                                                                     Re: synchronization, posted by lance on Fri Jun 26 14:27:27 2009                            Stefan Ritt wrote:                                                                         Re: synchronization, posted by Stefan Ritt on Mon Aug 3 10:16:12 2009                            lance wrote:                                           Thanks for the reply.   display GMT time instead of local time in Entry time/ Last edit field, posted by Dan Duong on Tue Jul 28 02:50:42 2009  Hi all, I have set my PC in Time Zone GMT+10:00 but I get GMT time in Entry time/Last edit field. I have installed in another PC. Which has Time Zone GMT+10:00 but I still get GMT time in Entry time/Last edit field.       Re: display GMT time instead of local time in Entry time/ Last edit field, posted by Stefan Ritt on Tue Jul 28 11:04:01 2009                            Dan Duong wrote:                                            Hi all,          Re: display GMT time instead of local time in Entry time/ Last edit field, posted by Dan Duong on Wed Jul 29 04:56:27 2009                            Stefan Ritt wrote:                                                                      Re: display GMT time instead of local time in Entry time/ Last edit field, posted by Stefan Ritt on Wed Jul 29 09:21:39 2009                            Dan Duong wrote:                                             I did as instructed but time was 20 hours behide                Re: display GMT time instead of local time in Entry time/ Last edit field, posted by Dan Duong on Mon Aug 3 03:26:23 2009                            Stefan Ritt wrote:                                                  Can't install on Fedora 11, posted by Neil B. Cohen on Fri Jul 31 20:41:12 2009  Tried installing on Fedora 11 - failed dependency on libssl.so.6 I have libssl.so.8 installed. What do I need to do to install this package? thanks, nbc       Re: Can't install on Fedora 11, posted by Stefan Ritt on Sat Aug 1 09:34:00 2009                            Neil B. Cohen wrote:                                            Tried installing on Fedora 11 - failed dependency on libssl.so.6 I have libssl.so.8 installed. What   Crashes when editing entries, posted by T. Ribbrock on Wed Jul 22 12:12:37 2009  For some odd reasons, we are experiencing frequent crashes of elogd over the past few days. It has been working fine so far, but more or less out of the blue it became rather unreliable. The current configuration is installed on two servers, one running 2.7.5.-r2174 on ClarkConnect 4 and one running 2.7.6-r2233 on Debian 4.0 - both show the same problem. Each of them has an "active" group with four logbooks and an "archive" group       Re: Crashes when editing entries, posted by T. Ribbrock on Wed Jul 22 12:15:56 2009                            T. Ribbrock wrote:                                            For some odd reasons, we are experiencing frequent crashes of elogd over the past few days. It has been       Re: Crashes when editing entries, posted by Stefan Ritt on Wed Jul 22 12:46:36 2009                            T. Ribbrock wrote:                                            For some odd reasons, we are experiencing frequent crashes of elogd over the past few days. It has been          Re: Crashes when editing entries, posted by T. Ribbrock on Wed Jul 22 15:35:57 2009                            Stefan Ritt wrote:                                            well, I need to reproduce your problem in order to fix it. The failed assertation you get is due to some internal             Re: Crashes when editing entries, posted by Stefan Ritt on Wed Jul 22 16:30:48 2009                            T. Ribbrock wrote:                                            Nonetheless, given that this set-up has been a great help for us - if you ever get the chance to make                Re: Crashes when editing entries, posted by T. Ribbrock on Wed Jul 22 16:52:13 2009                            Stefan Ritt wrote:                                                                            Re: Crashes when editing entries, posted by T. Ribbrock on Wed Jul 29 14:48:34 2009  By now, I've installed 2244 and ran some rudimentary tests. So far, I was not able to reproduce the crash anymore. Looking good!    Odd problem (bug?) with certain attribute, posted by T. Ribbrock on Tue Jul 28 16:30:46 2009  I have the following simple test logbook: ; General List display = Edit, Hostname, OS, Size Entries per page = 150 Quick filter = OS Date Format = %d/%m/%Y Summary Lines = 0 ; Attributes Attributes = Hostname, OS, CPU,Size Required Attributes = Hostname Sort Attributes = Hostname ; Message part: log is text only, but elog       Re: Odd problem (bug?) with certain attribute, posted by Stefan Ritt on Tue Jul 28 16:57:39 2009                            T. Ribbrock wrote:                                            I have the following simple test logbook:          Re: Odd problem (bug?) with certain attribute, posted by T. Ribbrock on Tue Jul 28 17:10:13 2009                            Stefan Ritt wrote:                                            That's indeed a strange bug, and thanks to your detailed explanation I could easily reproduce it. The problem was             Re: Odd problem (bug?) with certain attribute, posted by T. Ribbrock on Wed Jul 29 13:23:41 2009                            T. Ribbrock wrote:                                             Very nice, thank you! Given that I also still have to test the fix you made for the crash problem with "shared"   attachment not displayed if entry contains link to attachment., posted by Devin Bougie on Mon Jul 27 18:02:14 2009  I'm not sure if this is the expected behavior, but it appears as though an attachment is not displayed in the list of attachments if you manually add a link to the attachment into the body of the entry.  I would greatly appreciate any advice on how to fix or change this behavior. I will try to demonstrate with the two attachments on this entry.  There are two attachments in this entry, but only one appears in the standard       Re: attachment not displayed if entry contains link to attachment., posted by Stefan Ritt on Tue Jul 28 10:42:40 2009                            Devin Bougie wrote:                                            I'm not sure if this is the expected behavior, but it appears as though an attachment is not displayed       Re: attachment not displayed if entry contains link to attachment., posted by Stefan Ritt on Tue Jul 28 13:30:35 2009                            Devin Bougie wrote:                                            I'm not sure if this is the expected behavior, but it appears as though an attachment is not displayed   Wrong error message if invalid attribute is used, posted by T. Ribbrock on Mon Jul 27 10:20:14 2009  I just ran into this little bug: I had defined a new logbook in my config file and suddenly got the message Attribute "Date" not allowed. While I did have several attributes starting with the word "Date" (e.g. "Date In Service", "Date Retired") I had no attribute "Date" in there. After some pondering and wildly commenting out lines, it finally dawned on me: I had used an attribute "ID" - which       Re: Wrong error message if invalid attribute is used, posted by Stefan Ritt on Mon Jul 27 10:49:19 2009                            T. Ribbrock wrote:                                            I just ran into this little bug: I had defined a new logbook in my config file and suddenly got the   Changing Entry Time, posted by Jay Johnstone on Mon Jul 27 01:39:18 2009  Hi, I am new to eLog, trying to make a logbook tool.  This is probably a question with a simple answer, but here it is...  I need to be able to edit the entry time for an entry as it is being made and also in Edit mode later.  We have field staff who use a paper log in the field and then       Re: Changing Entry Time, posted by Stefan Ritt on Mon Jul 27 08:40:50 2009                            Jay Johnstone wrote:                                            Hi,          Re: Changing Entry Time, posted by Jay Johnstone on Mon Jul 27 09:25:06 2009                            Stefan Ritt wrote:                                                            Reply not working correct, posted by kyle carpenter on Tue Jul 21 22:29:17 2009  Hi, I love this software. I am not a programmer but have learned alot about the program. I have 2 questions.       Re: Reply not working correct, posted by Stefan Ritt on Wed Jul 22 08:03:28 2009                            kyle carpenter wrote:                                            Hi,          Re: Reply not working correct, posted by Stefan Ritt on Wed Jul 22 08:05:12 2009                            Stefan Ritt wrote:                                                            Using conditional attributes, posted by Adam Blandford on Sat Jul 18 10:38:00 2009  Hi I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport       Re: Using conditional attributes, posted by Stefan Ritt on Mon Jul 20 08:18:45 2009                            Adam Blandford wrote:                                            Hi          Re: Using conditional attributes, posted by Richard Stamper on Mon Jul 20 13:52:58 2009                            Stefan Ritt wrote:                                                            Elog Crashes, posted by lance on Mon Jul 20 09:26:41 2009  Stefan,   Our log is crashing on a regular basis and I have been unable to identify the reason. Now the if the log crashes that is not a major problem however when you try to stop the daemon from the services it fails to stop. This means that the daemon cannot be restarted. The only way then is to start killing processes. This is not something       Re: Elog Crashes, posted by Stefan Ritt on Mon Jul 20 10:30:44 2009                            lance wrote:                                           Stefan,                              Using conditional attributes, posted by Adam Blandford on Sat Jul 18 10:38:24 2009  Hi I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport       Re: Using conditional attributes, posted by Adam Blandford on Sat Jul 18 10:41:28 2009  Sorry about the multiple entries!!! -> browser problems   Using conditional attributes, posted by Adam Blandford on Sat Jul 18 10:38:22 2009  Hi I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport   Quick filter for date, posted by Michael on Thu Jul 16 11:18:05 2009  Hello ! Is any posibility to  set  quick filter, for fields with atribute "date", to exactly value, like 15/07/2009, instead of drop menu with values like - last day, last week, etc ?       Re: Quick filter for date, posted by Stefan Ritt on Thu Jul 16 12:05:54 2009                            Michael wrote:                                           Hello !          Re: Quick filter for date, posted by Michael on Thu Jul 16 13:47:31 2009                            Stefan Ritt wrote:                                                            Page Expired, Duplicate Entries & Thumbnail Woes?, posted by Mike on Mon Jul 6 17:20:36 2009  Have a few issues here. The big one is that I have some users of our elog books that are in India, while the server is in USA. When they click on thumbnail images then press their browser back-button they get a page expired message and are       Re: Page Expired, Duplicate Entries & Thumbnail Woes?, posted by Stefan Ritt on Tue Jul 7 08:53:43 2009                            Mike wrote:                                           Have a few issues here. The big one is that I have some users of our elog books          Re: Page Expired, Duplicate Entries & Thumbnail Woes?, posted by Mike on Wed Jul 8 15:59:17 2009                            Stefan Ritt wrote:                                                                      Re: Page Expired, Duplicate Entries & Thumbnail Woes?, posted by Mike on Fri Jul 10 15:08:31 2009                            Mike wrote:                                                                         Re: Page Expired, Duplicate Entries & Thumbnail Woes?, posted by Stefan Ritt on Fri Jul 10 15:28:46 2009                            Mike wrote:                                           I talked to my associate from India. He tried that link you provided and claims that even on your                   Re: Page Expired, Duplicate Entries & Thumbnail Woes?, posted by Mike on Tue Jul 14 14:18:45 2009                            Stefan Ritt wrote:                                                            Password recovery setup, posted by Ed Strohak on Sun Jul 5 19:14:05 2009   I'm trying to use gmail to send password recovery e-mails, I get this error when I submit the email address. "Error sending Email via "smtp.gmail.com": 5.7.0 Must issue a STARTTLS command first. 2sm5111524agd.34"       Re: Password recovery setup, posted by Stefan Ritt on Mon Jul 6 07:48:09 2009                            Ed Strohak wrote:                                             I'm trying to use gmail to send password recovery e-mails, I get this error when I submit the   Cancelling an Roption selection in Edit., posted by David Pilgram on Thu Jul 2 09:39:40 2009  Hi Stefan, I don't know if anyone else would be interested or need this...       Re: Cancelling an Roption selection in Edit., posted by Stefan Ritt on Thu Jul 2 10:04:13 2009  > Hi Stefan, >  > I don't know if anyone else would be interested or need this...          Re: Cancelling an Roption selection in Edit., posted by David Pilgram on Thu Jul 2 11:33:48 2009  > > Hi Stefan, > >  > > I don't know if anyone else would be interested or need this...   Checks on datetime seconds field generate warning in IE7, posted by Richard Stamper on Wed Jul 1 17:00:30 2009  When adding a log entry containing a datetime field using the IE7 browser a Javascript warning is displayed - see the attachment.  This is due to a change in the naming of the "seconds" field of a datetime entry (made in version 2143) not being propagated to the code that generates the Javascript that checks the supplied values.       Re: Checks on datetime seconds field generate warning in IE7, posted by Stefan Ritt on Thu Jul 2 08:36:57 2009                            Richard Stamper wrote:                                            When adding a log entry containing a datetime field using the IE7 browser a Javascript warning is displayed   attached picture size changed, posted by weiluo on Thu Jun 25 22:58:01 2009  [SIZE=4] Hello everyone. Here I found a problem recently with attaching screen-shot to the elog.       Re: attached picture size changed, posted by Stefan Ritt on Fri Jun 26 08:15:16 2009  [quote="weiluo"] Hello everyone. Here I found a problem recently with attaching screen-shot to the elog.          Re: attached picture size changed, posted by weiluo on Fri Jun 26 17:04:23 2009  [quote="Stefan Ritt"][quote="weiluo"] Hello everyone. Here I found a problem recently with attaching screen-shot to the elog.   Formatting list page data, posted by Steve Williamson on Wed Jun 10 09:16:55 2009  Thanks for a great piece of software - it does so much and is (mostly) so simple to use.  However, I do have a suggestion that (for me, at least) would make it even better - I use elog for a variety of logging tasks but find that, because I want to see as complete a summary as possible, the list page can get very crowded       Re: Formatting list page data, posted by Stefan Ritt on Thu Jun 25 15:02:55 2009                            Steve Williamson wrote:                                            Thanks for a great piece of software - it does so much and is (mostly) so simple to use.  However,          Re: Formatting list page data, posted by Steve Williamson on Fri Jun 26 14:34:58 2009                            Stefan Ritt wrote:                                                            Move to: elog crashes with large no of entries being moved., posted by David Pilgram on Wed Jun 10 13:56:09 2009  Hi Stefan, I've been slowly moving threads, and twice now so far (and reproducably) had elog crash.       Re: Move to: elog crashes with large no of entries being moved., posted by Stefan Ritt on Wed Jun 10 14:09:04 2009  > Hi Stefan, >  > I've been slowly moving threads, and twice now so far (and reproducably) had elog crash.          Re: Move to: elog crashes with large no of entries being moved., posted by David Pilgram on Wed Jun 10 15:31:13 2009  > > Hi Stefan, > >  > > I've been slowly moving threads, and twice now so far (and reproducably) had elog crash.       Re: Move to: elog crashes with large no of entries being moved., posted by Stefan Ritt on Thu Jun 25 15:55:04 2009  > Hi Stefan, >  > I've been slowly moving threads, and twice now so far (and reproducably) had elog crash.   Denial of access after failed import using invalid attributes, posted by soren poulsen on Wed Jun 17 03:46:31 2009  Hi, A user tried to import a CSV file, which caused e-log to add a field called "date" to the list of attributes (and then crash). This caused the log-book to be blocked until someone (guess who) would go edit the elogd.cfg file and then trigger a reload.       Re: Denial of access after failed import using invalid attributes, posted by Stefan Ritt on Thu Jun 25 12:30:17 2009                            soren poulsen wrote:                                            Hi,   (my) Firefox breaks Elog with this config file, posted by Michael Husbyn on Wed Jun 24 13:23:49 2009  Hi, Did a fresh install on a Windows 2003 server (and tried it on my personal computer) After startup I can click on Norway/nor, and then the server just stops responding. I see in the log nothing, the last line: Received unknown cooke "style" Then it stops responding and after a few seconds I see the dos window returns to commandline prompt. Probably a very bad config file. On Windows XP it informs we of Dr Watson, memory could not be read       Re: (my) Firefox breaks Elog with this config file, posted by Stefan Ritt on Wed Jun 24 14:28:43 2009                            Michael Husbyn wrote:                               Hi,  Did a fresh install on a Windows 2003 server (and tried it on my personal computer)  After startup I can click on          Re: (my) Firefox breaks Elog with this config file, posted by Michael Husbyn on Thu Jun 25 09:07:51 2009  Stefan Ritt wrote:                                        Re: (my) Firefox breaks Elog with this config file, posted by Stefan Ritt on Thu Jun 25 09:26:00 2009                            Michael Husbyn wrote:                                                                         Re: (my) Firefox breaks Elog with this config file, posted by Michael Husbyn on Thu Jun 25 10:21:10 2009  Stefan Ritt wrote:                                              Re: (my) Firefox breaks Elog with this config file, posted by Stefan Ritt on Thu Jun 25 10:51:12 2009                            Michael Husbyn wrote:                                                                               Re: (my) Firefox breaks Elog with this config file, posted by Michael Husbyn on Thu Jun 25 11:04:53 2009  Stefan Ritt wrote:                              Auto-increment substitutions broken with records for multiple days, posted by Richard Stamper on Wed Jun 24 15:02:49 2009  With a logbook defined by   [test]       Re: Auto-increment substitutions broken with records for multiple days, posted by Stefan Ritt on Thu Jun 25 10:09:18 2009  > An alternative patch: >  >       /* if date part matches */   Elog won't start, posted by Jean-Philippe Bertrand on Mon Jun 22 16:08:59 2009  We are currently having problems with Elog, I never had a problem installing it before but with my last 3 install I can't get it to work. We are running under Windows XP, the installation works perfectly but when I try to use the shortcut pointing to the localhost 8080, I get an error page from Internet Explorer telling me that the server cannot be found. I've rebootied the computer to make sure the server was running but still the same problem. Is there       Re: Elog won't start, posted by Stefan Ritt on Mon Jun 22 16:44:54 2009                            Jean-Philippe Bertrand wrote:                                            We are currently having problems with Elog, I never had a problem installing it before but with my last          Re: Elog won't start, posted by Jean-Philippe Bertrand on Mon Jun 22 17:09:05 2009                            Stefan Ritt wrote:                                                            Entries are being deleted automatically, posted by Pittelli Mike on Wed Jun 17 15:56:54 2009  A few days after I create entries in my logbooks, they are being deleted. Has this happened to anyone before?       Re: Entries are being deleted automatically, posted by Stefan Ritt on Wed Jun 17 16:26:11 2009                            Pittelli Mike wrote:                                            A few days after I create entries in my logbooks, they are being deleted. Has this happened to anyone   Dropdown boxes and Moptions, posted by Arno Teunisse on Fri Jun 12 23:43:28 2009  Hello I have a config file  : Attributes = Author, Author Email, Category, Customer, server,HPSD_ID, Cust_ID ,Subject ,  Change Window        Re: Dropdown boxes and Moptions, posted by Stefan Ritt on Mon Jun 15 16:44:35 2009                            Arno Teunisse wrote:                                            Hello   wrapping long lines in config file, posted by W.Koster on Fri Jun 12 16:59:18 2009  Greetings, I was wondering, is it possible to wrap lines in the config file ?        Re: wrapping long lines in config file, posted by Stefan Ritt on Mon Jun 15 12:51:27 2009  [quote=W.Koster] Greetings,          Re: wrapping long lines in config file, posted by W.Koster on Mon Jun 15 12:57:17 2009  [quote="Stefan Ritt"] What I do is to use an editor with automatic wrapping functions, like the free [URL=http://www.pspad.com]PSPad[/URL] editor. It nicely wraps line and indicates that:             Re: wrapping long lines in config file, posted by Stefan Ritt on Mon Jun 15 16:36:38 2009  [quote="W.Koster"][quote="Stefan Ritt"] What I do is to use an editor with automatic wrapping functions, like the free [URL=http://www.pspad.com]PSPad[/URL] editor. It nicely wraps line and indicates that:   search and datetime, posted by Arno Teunisse on Wed Jun 10 22:27:08 2009  Hello I have the following in elog.cfg : Attributes = Author, Author Email, Category, Customer, server, Subject ,  Change Window Begin ,       Re: search and datetime, posted by Stefan Ritt on Mon Jun 15 12:56:32 2009                            Arno Teunisse wrote:                                            Hello   I can not access the Logbook from another machine, posted by Gerardo Pruneda on Sun Jun 7 06:30:52 2009  I need some guidedance on how to access the logbook from another computer. I installed the logbook on a Windows server machine and started the logbook using port 81. I can connect to the logbook on the same machine, but I can not access it from another machine on the same network.       Re: I can not access the Logbook from another machine, posted by Stefan Ritt on Mon Jun 8 07:34:18 2009                              Gerardo Pruneda wrote:                                  I can not access the Logbook from another machine, posted by Gerardo Pruneda on Sun Jun 7 06:29:55 2009  I need some guidedance on how to access the logbook from another computer. I installed the logbook on a Windows server machine and started the logbook using port 81. I can connect to the logbook on the same machine, but I can not access it from another machine on the same network.   Embedded images break when moving from one book to another., posted by Mike on Fri May 8 16:32:03 2009  Here's the issue. We use elog to develope products we need to be able to see all the thumbnail images in a particular logbook. Our default view is to use the threaded view fully expanded in order to have all the thumbnails be displayed for each product. This works fine but when we move one message to another logbook the thumbnails       Re: Embedded images break when moving from one book to another., posted by Stefan Ritt on Thu Jun 4 15:37:44 2009                              Mike wrote:                                         Re: Embedded images break when moving from one book to another., posted by Mike on Thu Jun 4 17:51:02 2009                            Stefan Ritt wrote:                                                          Re: Embedded images break when moving from one book to another., posted by Stefan Ritt on Fri Jun 5 12:42:55 2009                            Mike wrote:                                            This is a major improvement. The only issue now is when we embed an image in the body of the message elog makes a nice thumbnail. When                Re: Embedded images break when moving from one book to another., posted by Mike on Fri Jun 5 14:13:52 2009                            Stefan Ritt wrote:                                                         elogd dies after receiving second SIGHUP, posted by Kester Habermann on Tue Nov 11 16:45:04 2008  elogd continues to run after a SIGHUP. If a second SIGHUP is received the daemon terminates. This was observed on Solaris 10 (SPARC). The documentation states that elogd should re-read configuration after receiving SIGHUP.       Re: elogd dies after receiving second SIGHUP, posted by Stefan Ritt on Mon Nov 17 10:27:23 2008  > elogd continues to run after a SIGHUP. If a second SIGHUP is received the daemon terminates. > This was observed on Solaris 10 (SPARC). > The documentation states that elogd should re-read configuration after receiving SIGHUP.          Re: elogd dies after receiving second SIGHUP, posted by Paul T. Keener on Wed Jun 3 19:53:13 2009  > > elogd continues to run after a SIGHUP. If a second SIGHUP is received the daemon terminates. > > This was observed on Solaris 10 (SPARC). > > The documentation states that elogd should re-read configuration after receiving SIGHUP.             Re: elogd dies after receiving second SIGHUP, posted by Stefan Ritt on Thu Jun 4 09:49:13 2009  > > > elogd continues to run after a SIGHUP. If a second SIGHUP is received the daemon terminates. > > > This was observed on Solaris 10 (SPARC). > > > The documentation states that elogd should re-read configuration after receiving SIGHUP.                Re: elogd dies after receiving second SIGHUP, posted by Paul T. Keener on Thu Jun 4 18:49:29 2009  > > > > elogd continues to run after a SIGHUP. If a second SIGHUP is received the daemon terminates. > > > > This was observed on Solaris 10 (SPARC). > > > > The documentation states that elogd should re-read configuration after receiving SIGHUP.                   Re: elogd dies after receiving second SIGHUP, posted by Stefan Ritt on Fri Jun 5 13:18:00 2009  > Here is the patch.  It works under both Solaris and Linux. Thanks! I put that into revision #2207.   Moving entry (and replies) from one log book to another, posted by David Pilgram on Fri May 1 14:01:44 2009  Hi Stefan, When Moving entry (and replies) from one log book to another, is it possible to prevent elog from renumbering       Re: Moving entry (and replies) from one log book to another, posted by David Pilgram on Thu Jun 4 15:21:23 2009  Hi Stefan, Any possibility on this one?       Re: Moving entry (and replies) from one log book to another, posted by Stefan Ritt on Fri Jun 5 11:29:43 2009  > Hi Stefan, >  > When Moving entry (and replies) from one log book to another, is it possible to prevent elog from renumbering          Re: Moving entry (and replies) from one log book to another, posted by David Pilgram on Fri Jun 5 12:02:45 2009  Thanks Stefan,  Downloading shortly and I'll let you know ;-) > > Hi Stefan, > >    Memory leak in 2.76 elogd.exe, posted by jon huang on Thu Jun 4 17:51:50 2009  Hi, There's seems to be a memory leak with elogd.exe running windows.  I had this problem with older version of elogd.exe, i've just upgrade to the latest and the problems still exist. I've had this issue with earlier versions.  I've just upgrade elog to the latest 2.76 version. The memory       Re: Memory leak in 2.76 elogd.exe, posted by Stefan Ritt on Fri Jun 5 10:51:17 2009                              jon huang wrote:                                  help with substituting subjects, posted by Alexander Withers on Wed May 6 20:49:24 2009  I am trying to add additional information to the subject of new entries: Subst subject = $subject [INCIDENT $message id] Subst on reply subject = Re: $subject Fixed Attributes Reply = Subject However, the new entry subject looks like:       Re: help with substituting subjects, posted by Stefan Ritt on Thu Jun 4 14:44:11 2009                              Alexander Withers wrote:                                  User can modify Fixed Attributes Edit when selecting preview, posted by Allen on Thu May 7 15:09:09 2009  Hi.  I'm pretty new to ELOG, so I'm not sure if I'm doing something wrong.   I have a bunch of fields set so that after an entry has been submitted, they cannot edit certain fields.  When I click the edit button, everything       Re: User can modify Fixed Attributes Edit when selecting preview, posted by Stefan Ritt on Thu Jun 4 14:37:54 2009                              Allen wrote:                                  E-log crash, posted by soren poulsen on Thu May 14 17:41:44 2009  Hi I am having a little problem with e-log that I can easily reproduce. I have defined a number of constraints on my e-log fields and I am testing what happens when the user does not respect them.       Re: E-log crash, posted by Stefan Ritt on Thu May 14 17:59:04 2009                              soren poulsen wrote:                                         Re: E-log crash, posted by soren poulsen on Tue May 19 15:19:16 2009                            Stefan Ritt wrote:                                                    Re: E-log crash, posted by Stefan Ritt on Thu Jun 4 14:05:58 2009                              soren poulsen wrote:                                  Supress Email to Author of a message?, posted by Mike on Fri May 22 00:22:07 2009  I couldn't find an obvious solution to the problem. I'd like to suppress email notification to the author of a message. I've had some people complaining that when they use elog they don't want to get an email about what they wrote       Re: Supress Email to Author of a message?, posted by Stefan Ritt on Thu Jun 4 14:04:21 2009                              Mike wrote:                                  Mail and logged in user , posted by Arno Teunisse on Sun May 10 22:18:56 2009  Hello Was playing with elog. I send mail to the persons involved with a elog entrie. This mail produces something like this ( rather default) .  Logbook: Accelerator  Message ID: 4    Entry       Re: Mail and logged in user , posted by Stefan Ritt on Mon May 18 12:28:00 2009                              Arno Teunisse wrote:                                         Re: Mail and logged in user , posted by Arno Teunisse on Tue May 19 23:43:20 2009                            Stefan Ritt wrote:                                                can't send form , posted by larbi benouahi on Thu May 14 14:26:36 2009  Hi, when i try to send a form after edit or create an entry i got this message : Connection closed by remote server is there any idea   "Forgot Password?" link not working?, posted by Mike on Sat Apr 18 02:49:42 2009  I have my site running under apache. I don't have a /elog/ directory. for example most would do http://www.example.com/elog/ to visit elog but my site loads at http://www.example.com/       Re: "Forgot Password?" link not working?, posted by Stefan Ritt on Wed May 6 15:56:10 2009                              Mike wrote:                                         Re: "Forgot Password?" link not working?, posted by Mike on Wed May 6 18:31:19 2009                            Stefan Ritt wrote:                                                          Re: "Forgot Password?" link not working?, posted by Stefan Ritt on Thu May 7 08:05:54 2009                            Mike wrote:                                            Thanks for the fix. I tried out 2197 and when I click the "Forgot Password" link it causes elog to crash. I've attached my                Re: "Forgot Password?" link not working?, posted by Mike on Thu May 7 13:46:37 2009                            Stefan Ritt wrote:                                                         Office 2007 file attachments download as zip due to mime config, posted by Rich Sterling on Tue May 5 01:47:36 2009  Submitted as a question because some folks may consider this a bug in IE (but not MS obviously because IE8 does the same).  When you upload a new open XML attachment (Office 2007 file extension, docx, ppts, xlsx, etc) the attachment is not recognized properly in IE and it tries to download as a zip file (since the OOXML is actually is a zipped set of XML docs).  This is something that is widely recognized on the Internet ( http://www.google.com/search?hl=en&q=docx+internet+explorer+zip&aq=1&oq=docx+internet )       Re: Office 2007 file attachments download as zip due to mime config, posted by Stefan Ritt on Wed May 6 15:30:24 2009                            Rich Sterling wrote:                                            Are there any          Re: Office 2007 file attachments download as zip due to mime config, posted by Rich Sterling on Thu May 7 13:35:32 2009                            Stefan Ritt wrote:                                               Multi Logook Login, posted by Hal Proctor on Tue Apr 14 15:26:14 2009  We have two logbooks, each with a different list of users.    The logbooks are open to all network users for read only.       Re: Multi Logook Login, posted by Grant Jeffcote on Tue Apr 14 18:51:43 2009                                         Hal Proctor wrote:                                                                   Re: Multi Logook Login, posted by Hal Proctor on Tue Apr 14 20:03:06 2009                            Grant Jeffcote wrote:                                                                     Re: Multi Logook Login, posted by Stefan Ritt on Wed Apr 15 09:51:35 2009                              Hal Proctor wrote:                                               Re: Multi Logook Login, posted by Yoshio Imai on Wed Apr 15 14:44:42 2009  Hi, Stefan! [quote=Stefan Ritt]If [B]"password file = xxx"[/B] is however in each individual logbooks configuration, then you get [B]"path=/<lobook>"[/B]. You can                   Re: Multi Logook Login, posted by Stefan Ritt on Wed May 6 16:03:56 2009  [quote="Yoshio Imai"]Hi, Stefan! [quote=Stefan Ritt]If [B]"password file = xxx"[/B] is however in each individual logbooks configuration, then you get [B]"path=/<lobook>"[/B]. You can                Re: Multi Logook Login RESOLVED, posted by Hal Proctor on Tue Apr 21 20:32:10 2009                            Stefan Ritt wrote:                                                Mirror Server Funktion , posted by Andreas Wilke on Tue Apr 21 22:13:26 2009  Ich möchte meine "lokale" ELOG Installation mit einem Server in der Firma synchronisieren. Dazu habe ich in der entfernten Firewall ein Portmapping auf den ELOG Server in der Firma eingerichtet. Wenn ich von meiner "lokalen" Maschine im Browser  http://meinedomain.dyndns.xx:PORT       Re: Mirror Server Funktion , posted by Stefan Ritt on Wed May 6 15:38:10 2009                              Andreas Wilke wrote:                                  Problem Naming Logbooks, posted by mike cianci on Fri May 1 08:05:42 2009  I have a logbook named "Centaur" (instrument name) for a problem log on an instrument and a logbook named "CentaurNewLot" for a logbook (Database Like - ELOG format) where we would log reagent lot number changes for that instrument.       Re: Problem Naming Logbooks, posted by Stefan Ritt on Wed May 6 15:35:44 2009                              mike cianci wrote:                                  Using preset text files , posted by soren poulsen on Mon May 4 11:22:40 2009  Hi, I am trying the Preset text option from the documentation: like: Attributes = Author, Type Options Type = Network check{1}, System check{2} {1} Preset text = network.txt {2} Preset text = system.txt I       Re: Using preset text files , posted by soren poulsen on Mon May 4 11:25:15 2009                            soren poulsen wrote:                                            Hi,       Re: Using preset text files , posted by Stefan Ritt on Mon May 4 11:50:30 2009                              soren poulsen wrote:                                         Re: Using preset text files , posted by soren poulsen on Mon May 4 18:06:01 2009                            Stefan Ritt wrote:                                                elogd runs by a user but not by root, posted by Dongwook Jang on Tue Apr 28 21:25:31 2009  Hi, I really don't understand why elogd cannot run by root but it runs by a user. I've put elog deamon in /etc/init.d. So it didn't bring up, but it runs if I run it by user interactively.       Re: elogd runs by a user but not by root, posted by Stefan Ritt on Wed Apr 29 07:52:57 2009                              Dongwook Jang wrote:                                         Re: elogd runs by a user but not by root, posted by Dongwook Jang on Wed Apr 29 18:20:38 2009                            Stefan Ritt wrote:                                                          Re: elogd runs by a user but not by root, posted by Stefan Ritt on Thu Apr 30 08:40:43 2009                            Dongwook Jang wrote:                                            Hi,                Re: elogd runs by a user but not by root, posted by Dongwook Jang on Thu Apr 30 20:49:03 2009                            Stefan Ritt wrote:                                                         Database Like - ELOG Format, posted by mike cianci on Wed Apr 29 12:28:13 2009  Stefan, I am using the Database Like - ELOG format and on the list page, the the last two columns (on the right side) are, "Text" and "Attachments (the paperclip)".       Re: Database Like - ELOG Format, posted by Stefan Ritt on Thu Apr 30 08:48:01 2009                            mike cianci wrote:                                           Stefan,   Error: Failed dependencies: , posted by Carl Shirey on Wed Nov 12 16:41:44 2008  I went to upgrade to the new version of elog I receive a error message that is.   error: Failed dependencies:       Re: Error: Failed dependencies: , posted by Stefan Ritt on Mon Nov 17 10:23:35 2008                              Carl Shirey wrote:                                         Re: Error: Failed dependencies: , posted by Carl Shirey on Mon Nov 17 19:56:04 2008                            Stefan Ritt wrote:                                                          Re: Error: Failed dependencies: , posted by Rob Snihur on Tue Apr 28 05:53:19 2009                            Carl Shirey wrote:                                                                            Re: Error: Failed dependencies: , posted by Stefan Ritt on Tue Apr 28 07:53:37 2009                              Rob Snihur wrote:                                  mail to localhost?, posted by Mike on Fri Apr 17 22:44:58 2009  Initially I thought you had to specify a port number after localhost for emailing. As it turns out just putting "localhost" as the email server in the elog config file works just fine. We have a strange problem where our elog server is running.       Re: mail to localhost?, posted by Stefan Ritt on Fri Apr 24 12:25:16 2009                              Mike wrote:                                  Is there a way to import old log messages, posted by Joseph Le on Tue Apr 21 16:29:23 2009  I update my elog from version 2.7.5 to 2.7.6 and mistakenly replace configuration file. so i have to reconfigure everything from ground up.  when my elog back online, old log messages are not show up. is there a way to import old log messages from old log book to new one.         Re: Is there a way to import old log messages, posted by Stefan Ritt on Fri Apr 24 09:03:05 2009                              Joseph Le wrote:                                  Config so that users can delete only their own entries?, posted by Dennis Seitz on Wed Apr 15 17:57:19 2009   I've tried  Deny_Delete = All       Re: Config so that users can delete only their own entries?, posted by Stefan Ritt on Thu Apr 16 08:34:03 2009  [quote="Dennis Seitz"] I've tried  Deny_Delete = All          Re: Config so that users can delete only their own entries?, posted by Dennis Seitz on Sat Apr 18 00:33:53 2009  Thanks for reminding me of that, it will do fine. A suggestion: Separate Restrict Edit into Restrict Edit and Restrict Delete or some functional equivalent. Then we have the choice to restrict one or the other or both. Is that worth doing?    ROptions value changed in the edit page, posted by Gabriele Sirri on Wed Apr 15 11:43:14 2009  When ROptions items contain the same substring and this substring is also an ROptions item (ex: notdone,  done), the value of the entry could change in the edit page.  It depends on the item order in the config file.        Re: ROptions value changed in the edit page, posted by Stefan Ritt on Wed Apr 15 12:56:18 2009  > When ROptions items contain the same substring and this substring is also an ROptions item (ex: notdone,  > done), the value of the entry could change in the edit page.  > It depends on the item order in the config file.    Long cookie content is not handled properly., posted by Simon Patton on Tue Apr 14 22:51:15 2009  I discovered the infinite loop in 2.7.5 which can happen when a cookie's content is longer that the cookie array designed to hold it. I also note that this issue has been addressed in 2.7.6, but the solution does not appear to be correct and it can end up completely confusing the cookie extraction.       Re: Long cookie content is not handled properly., posted by Stefan Ritt on Wed Apr 15 09:26:37 2009  [quote="Simon Patton"]I discovered the infinite loop in 2.7.5 which can happen when a cookie's content is longer that the cookie array designed to hold it. I also note that this issue has been addressed in 2.7.6, but the solution does not appear to be correct and it can end up completely confusing the cookie extraction.   Access Control, posted by Grant Jeffcote on Mon May 12 10:16:21 2008  Hi Stefan, We have a configuration where different sites have their own logbooks all under the same server, these are accessed by relevant parties as you might expect       Re: Access Control, posted by Yoshio Imai on Tue May 13 16:58:40 2008  [quote="Grant Jeffcote"]At present we can give others a full view by adding them to the 'Users' list for each individual logbook, this unfortunately also gives them 'write' access.[/quote]          Re: Access Control, posted by Grant Jeffcote on Tue May 13 21:56:30 2008  [quote="Yoshio Imai"][quote="Grant Jeffcote"]At present we can give others a full view by adding them to the 'Users' list for each individual logbook, this unfortunately also gives them 'write' access.[/quote]             Re: Access Control, posted by Grant Jeffcote on Thu May 15 17:45:44 2008  [quote="Grant Jeffcote"][quote="Yoshio Imai"][quote="Grant Jeffcote"]At present we can give others a full view by adding them to the 'Users' list for each individual logbook, this unfortunately also gives them 'write' access.[/quote]                Re: Access Control, posted by Hal Proctor on Tue Apr 14 20:00:08 2009  [quote="Grant Jeffcote"][quote="Grant Jeffcote"][quote="Yoshio Imai"][quote="Grant Jeffcote"]At present we can give others a full view by adding them to the 'Users' list for each individual logbook, this unfortunately also gives them 'write' access.[/quote]   Simple Math, posted by mike cianci on Mon Apr 13 07:26:39 2009  Sorry to bother you. I could see in past Forum entries that the question of  "Simple Math" has come up before, although the answers were not all that simple. Can you do simple math (i.e. attribute A + attribute B = attribute C) in ELOG ?       Re: Simple Math, posted by Stefan Ritt on Tue Apr 14 08:30:42 2009                              mike cianci wrote:                                         Re: Simple Math, posted by Erik Iverson on Tue Apr 14 17:57:56 2009                            Stefan Ritt wrote:                                                Allow password change ???, posted by Hal Proctor on Fri Apr 10 17:41:25 2009  How do you allow users to change password for a given logbook when the user keeps getting prompted for admin password to enter the change password feature? I have Allow password change = 1 set global and at each logbook hoping that would work. It allows them to change the password when and only when the user gets past the admin login when clicking CONFIG.       Re: Allow password change ???, posted by Hal Proctor on Fri Apr 10 19:32:33 2009                            Hal Proctor wrote:                                            How do you allow          Re: Allow password change ???, posted by Stefan Ritt on Tue Apr 14 08:48:24 2009                              Hal Proctor wrote:                                            Re: Allow password change RESOLVED???, posted by Hal Proctor on Tue Apr 14 15:18:11 2009                            Stefan Ritt wrote:                                                images in elog in safari, posted by David Jaffe on Thu Mar 26 02:33:59 2009  i cannot view images in elog, either as attachments or as icons, safari 3.2.1 mac os x 10.5.6         Re: images in elog in safari, posted by Stefan Ritt on Thu Mar 26 07:53:18 2009                              David Jaffe wrote:                                         Re: images in elog in safari, posted by Tsuguo Aramaki on Sun Apr 12 21:24:23 2009                            Stefan Ritt wrote:                                                         Re: images in elog in safari, posted by Stefan Ritt on Tue Apr 14 10:28:11 2009                              Tsuguo Aramaki wrote:                                  ELOG V2.7.5 Protect Selection page = 1 Crashes Program, posted by Mike on Fri Apr 10 22:54:56 2009  When I try to set Protect Selection page = 1 in the config file elog crashes. Attached is my config file.       Re: ELOG V2.7.5 Protect Selection page = 1 Crashes Program, posted by Stefan Ritt on Tue Apr 14 08:40:12 2009                              Mike wrote:                                  export the elog data, posted by urian bardulla on Thu Apr 9 11:53:19 2009  Hi guys, Is there any simple way to export the ELOG data in a more readable way, except copying the .log files???? Thank You in advance,       Re: export the elog data, posted by Stefan Ritt on Thu Apr 9 12:05:55 2009                              urian bardulla wrote:                                         Re: export the elog data, posted by Hal Proctor on Mon Apr 13 17:35:40 2009                            Stefan Ritt wrote:                                                          Re: export the elog data, posted by Stefan Ritt on Tue Apr 14 07:43:56 2009                              Hal Proctor wrote:                                  conditional attributes, posted by W.Koster on Thu Apr 9 10:39:34 2009  I'm (ab)using elog as a database and would like to use conditional attributes, like: Attributes = PC Name, Operating System, Version, Distribution       Re: conditional attributes, posted by Stefan Ritt on Thu Apr 9 10:52:29 2009  > I'm (ab)using elog as a database and would like to use conditional attributes, like: >  > Attributes = PC Name, Operating System, Version, Distribution   How to configure eLog to send an e-mail notification when new logbook entry time is reached?, posted by Tero Suominen on Wed Mar 25 14:16:21 2009  Hello! First I would like to thank you for making such a good free software available:). Then right back into the busness. I have a question to developers. I used the following Options to get the logbook entry  which defines the licences expiration date (See the attachement). Now I would like to ask on       Re: How to configure eLog to send an e-mail notification when new logbook entry time is reached?, posted by Stefan Ritt on Wed Mar 25 14:21:31 2009                              Tero Suominen wrote:                                         Re: How to configure eLog to send an e-mail notification when new logbook entry time is reached?, posted by Tero Suominen on Wed Mar 25 14:35:23 2009                            Stefan Ritt wrote:                                                          Re: How to configure eLog to send an e-mail notification when new logbook entry time is reached?, posted by W.Koster on Thu Apr 9 09:54:39 2009                            Tero Suominen wrote:                                                is it posible to configure text message area contain two sections, posted by Joseph Le on Wed Apr 1 18:03:44 2009  Hi, I try to configure the elog as servers log book.  I need to devide the text entry area by 2 section: 1 for issue so I can put in detail what is the issue of my servers.  the other section below the 1st one for solution.  is it posible to do so?       Re: is it posible to configure text message area contain two sections, posted by Stefan Ritt on Wed Apr 8 12:30:35 2009                              Joseph Le wrote:                                  Specifying the size of am image attachment, posted by Val Schmidt on Mon Apr 6 20:46:42 2009   Hello, I'm curious, is it possible to specify (perhaps by default) the rendered size of an attached image. For example, I'd like all images uploaded to be scaled to 100% of the browser window size so a large image is not most off the screen. What I want is to specify the width="100" attribute       Re: Specifying the size of am image attachment, posted by Stefan Ritt on Wed Apr 8 12:25:07 2009                              Val Schmidt wrote:                                  is it posible to configure text message area contain two sections, posted by Joseph Le on Wed Apr 1 18:03:22 2009  Hi, I try to configure the elog as servers log book.  I need to devide the text entry area by 2 section: 1 for issue so I can put in detail what is the issue of my servers.  the other section below the 1st one for solution.  is it posible to do so?   Missing icons when running trough Apache proxy, elogd version 2.75 , posted by Kristian Rune Larsen on Wed Apr 1 11:15:29 2009  Hi Tested this using the 2.6.1 version which comes packed with ubuntu-dapper and a 2.7.5 version I've compiled from source. If I compile the 2.7.5 version from source and start it using   Attachment not downloaded when elog is mirrored ?, posted by Franck Sabatie on Tue Mar 31 15:16:58 2009  Hello, I just mirrored a logbook and noticed attachments are missed. On another similar note, when an email notification is sent and the post has attachment, the attachment show up in the email BUT there is nothing   Email notifications not working properly, posted by Stefan Ritt on Thu Mar 26 17:30:23 2009   I just found out that email notifications only worked for the first 50 users of this forum. So if you registered only recently, you might not have received any notification. This was a bug inside elogd which I hope to have fixed now (this entry notification will show...). If you get the first notification and do not want this, log in to the ELOG Forum, click on "Config" and remove the checkmarks from the logbooks you do not want to get notifications.   New column on main page, posted by Dinkel Markus on Tue Mar 24 21:00:24 2009  Hi, is it possible to create a new column on the main page? Between "Logbuch" and "Einträge" I need the new column for enter the IP from the servers.       Re: New column on main page, posted by Stefan Ritt on Wed Mar 25 08:31:17 2009                              Dinkel Markus wrote:                                         Re: New column on main page, posted by Dinkel Markus on Wed Mar 25 11:26:54 2009                            Stefan Ritt wrote:                                                          Re: New column on main page, posted by Stefan Ritt on Wed Mar 25 11:33:14 2009                              Dinkel Markus wrote:                                               Re: New column on main page, posted by Dinkel Markus on Wed Mar 25 19:34:48 2009                            Stefan Ritt wrote:                                                                Re: New column on main page, posted by Stefan Ritt on Thu Mar 26 08:04:11 2009                            Dinkel Markus wrote:                                            This is Ok but in wich file can i add this tag? In the .cfg-file?                      Re: New column on main page, posted by Dinkel Markus on Thu Mar 26 17:09:47 2009                            Stefan Ritt wrote:                                                         Restrict edit - issue, posted by Heinzmann on Mon Mar 9 17:55:30 2009  Hello, please could you help me. The Restrict edit funktion is not working. Because my user Dirk is able to edit/delete the text from user Peter:       Re: Restrict edit - issue, posted by Heinzmann on Tue Mar 10 16:33:52 2009                            Heinzmann wrote:                               Problem solved, I had to set the 'preset       Re: Restrict edit - issue, posted by Stefan Ritt on Wed Mar 25 10:35:59 2009                              Heinzmann wrote:                                  Hiding Comments on the Logbook Selection Page, posted by Adam Blandford on Tue Mar 3 11:30:01 2009  Hi I was just wondering if there was a way that the comments for a logbook could be set to be invisible on the Selection page but then displayed once a user has logged in to a particular logbook?       Re: Hiding Comments on the Logbook Selection Page, posted by Stefan Ritt on Tue Mar 24 11:44:10 2009                              Adam Blandford wrote:                                  Find usage, posted by Mike Forster on Fri Mar 13 13:45:22 2009  Hello Stefan and Elog fans, Is there a way to find entries with the words program and error when then are not contiguous in the text? Thanks,       Re: Find usage, posted by Stefan Ritt on Wed Mar 18 04:37:19 2009                              Mike Forster wrote:                                         Re: Find usage, posted by Mike Forster on Wed Mar 18 15:40:17 2009                            Stefan Ritt wrote:                                                          Re: Find usage, posted by Stefan Ritt on Tue Mar 24 10:43:02 2009                              Mike Forster wrote:                                  "Full" view formatting, posted by Erik Iverson on Thu Mar 19 02:50:16 2009  I have a logbook I use to capture machine settings.  There are many (~30) different attributes defined.  I've defined the "Summary" view via "List display" in such a way that not all the attributes are displayed in the summary list, because there's no practical way to fit the 30 different attributes in 30 rows across the screen, and there's no need to have every attribute shown in the summary view.  I would like to define something for the "Full" view that       Re: "Full" view formatting, posted by Stefan Ritt on Tue Mar 24 10:42:25 2009  [quote="Erik Iverson"]I have a logbook I use to capture machine settings.  There are many (~30) different attributes defined.  I've defined the "Summary" view via "List display" in such a way that not all the attributes are displayed in the summary list, because there's no practical way to fit the 30 different attributes in 30 rows across the screen, and there's no need to have every attribute shown in the summary view.  I would like to define something for the   Escape emoticons in ELCODE, posted by Gernot Buselmeier on Fri Mar 20 14:33:53 2009  Hi, I want to write a text like "John:Doe" in ELCODE. However the ":D" is converted to a LOL emoticon. I tried various ways to escape this. One solution I found was entering "John\:Doe". However, the upper-case D is converted to lower-case: the result reads "John:doe".       Re: Escape emoticons in ELCODE, posted by Stefan Ritt on Tue Mar 24 10:34:14 2009                              Gernot Buselmeier wrote:                                  Storing Elog database files in version control (CVS/SVN/GIT)?, posted by Brett Viren on Mon Mar 23 19:30:09 2009  Hi, Is it possible to store ELOG back-end database files in version control so as to synchronize multiple ELOG       Re: Storing Elog database files in version control (CVS/SVN/GIT)?, posted by Brett Viren on Mon Mar 23 22:30:44 2009  [quote="Brett Viren"]Hi, Is it possible to store ELOG back-end database files in version control so as to synchronize multiple ELOG       Re: Storing Elog database files in version control (CVS/SVN/GIT)?, posted by Stefan Ritt on Tue Mar 24 08:14:48 2009  [quote="Brett Viren"]Hi, Is it possible to store ELOG back-end database files in version control so as to synchronize multiple ELOG   Adding texts for each attachment, posted by Dongwook Jang on Mon Mar 16 22:33:23 2009  Dear Stefan, First of all, I appreciate that you made such a nice program. I've used elog for more than 5 years and it was wonderful experince to me and my research work was very productive with this.       Re: Adding texts for each attachment, posted by Stefan Ritt on Mon Mar 16 22:53:22 2009                              Dongwook Jang wrote:                                         Re: Adding texts for each attachment, posted by Dongwook Jang on Tue Mar 17 02:05:08 2009                            Stefan Ritt wrote:                                                          Re: Adding texts for each attachment, posted by Stefan Ritt on Wed Mar 18 04:23:41 2009                            Dongwook Jang wrote:                                           Dear Stefan,   How ca I delete / hide the Elog Icon and Labels like ELOG V2.7.5-2175, posted by Heinzmann on Wed Mar 11 15:51:36 2009  Hi Stephan, How can I delete / hide the Elog Icon  and Labels like ELOG V2.7.5-2175 ?       Re: How ca I delete / hide the Elog Icon and Labels like ELOG V2.7.5-2175, posted by Heinzmann on Thu Mar 12 21:21:00 2009                            Heinzmann wrote:                                            Hi Stephan,   Odd behaviour with gecko based browsers and reverse proxy., posted by Andraž 'ruskie' Levstik on Thu Mar 12 08:03:07 2009  I have a really odd issue with elog... My setup:   Elogd crash, posted by Dominique Bolla on Wed Mar 11 11:28:27 2009  Hello, Please could you help me. We have 2 elog servers synchronized every minute via Elog mirroring function.   Email recall function similar to what exists say in something like Outlook, posted by Niall Dooley on Fri Mar 6 13:49:19 2009  Hi, Is there a way perhaps of implementing an email recall feature into E-Log? In other words, to recall an email before the recipient (s) read the email originating from the e-log. Something perhaps along the lines of what exists in something like Outlook.       Re: Email recall function similar to what exists say in something like Outlook, posted by Stefan Ritt on Mon Mar 9 19:00:26 2009                            Niall Dooley wrote:                                            Hi,   Login issue , posted by Heinzmann on Thu Mar 5 23:20:13 2009  Hello, I have installed the latest elog version from your web site. My Admin user and my Login user are set in the elog.cfg to use the Self register process within the first login.       Re: Login issue , posted by Heinzmann on Mon Mar 9 14:50:03 2009                            Heinzmann wrote:                                            Hi,          Re: Login issue , posted by Heinzmann on Mon Mar 9 17:32:54 2009                            Heinzmann wrote:                                                                      Re: Login issue , posted by Stefan Ritt on Mon Mar 9 18:58:18 2009                            Heinzmann wrote:                                                               Email authentication with SSL/TLS, posted by Val Schmidt on Wed Mar 4 22:47:46 2009  Hi, I'm curious is it possible to send email notificaitons from elog through an smtp server that requires SSL/TLS authentication? I think it's not but I thought I'd ask.       Re: Email authentication with SSL/TLS, posted by Stefan Ritt on Fri Mar 6 21:51:48 2009                              Val Schmidt wrote:                                  Elogd crashes with: *** stack smashing detected ***, posted by Niklas on Fri Nov 21 10:53:09 2008  Hi,   elogd sometimes crashes when there are large cookies. Or I'd guess it has something to do with the cookies, elogd crashed over and over again until       Re: Elogd crashes with: *** stack smashing detected ***, posted by Niklas on Fri Nov 21 16:02:10 2008                            Niklas wrote:                                            Hi,          Re: Elogd crashes with: *** stack smashing detected ***, posted by Stefan Ritt on Mon Nov 24 18:15:01 2008                              Niklas wrote:                                            Re: Elogd crashes with: *** stack smashing detected ***, posted by Niklas on Thu Nov 27 10:29:19 2008                            Stefan Ritt wrote:                                                          Re: Elogd crashes with: *** stack smashing detected ***, posted by Niklas on Fri Jan 9 10:41:20 2009                            Stefan Ritt wrote:                                                             Re: Elogd crashes with: *** stack smashing detected ***, posted by Niklas on Tue Jan 13 14:30:37 2009    Stefan, To solve the problem I suggest following change to elogd.c (2.7.5 2159).                   Re: Elogd crashes with: *** stack smashing detected ***, posted by Stefan Ritt on Wed Jan 21 08:45:25 2009                              Niklas wrote:                                                     Re: Elogd crashes with: *** stack smashing detected ***, posted by Niklas on Wed Mar 4 16:32:56 2009                            Stefan Ritt wrote:                                                                      Re: Elogd crashes with: *** stack smashing detected ***, posted by Stefan Ritt on Wed Mar 4 16:41:27 2009                            Niklas wrote:                                           Tried 2178 and I seem to hit some endless loop when I have big cookies. The loop seems to be in this for-loop (from gdb).   Idea/Suggestion, posted by David Pilgram on Sat Feb 21 23:08:54 2009  Hi Stefan, In the past I have requested the "mark whole thread" feature, not yet implimented.  At present, I        Re: Idea/Suggestion, posted by Stefan Ritt on Thu Feb 26 11:00:00 2009  > In the past I have requested the "mark whole thread" feature, not yet implimented. That's not correct, it is implemented. Just add an attribute for that. Assume you have problem reports, so you           Re: Idea/Suggestion, posted by David Pilgram on Mon Mar 2 22:00:33 2009  Hi Stefan, Must have missed it when the fixed/not fixed thread marking got implimented.             Re: Idea/Suggestion, posted by Stefan Ritt on Tue Mar 3 12:38:07 2009  > Hi Stefan, >  > Must have missed it when the fixed/not fixed thread marking got implimented.   Attachment problems, posted by Dennis Seitz on Fri Feb 27 16:43:01 2009  Apologies if these are known bugs, I'm very busy at the moment but I wanted to post this before I forget: I'm using Safari on a Mac to make Elog entries. 1) The preview of some pdf attachments in edit mode displays huge areas of white space around each page. I can send examples if you'd like - please       Re: Attachment problems, posted by Stefan Ritt on Fri Feb 27 17:25:30 2009                              Dennis Seitz wrote:                                         Re: Attachment problems, posted by Dennis Seitz on Fri Feb 27 20:52:42 2009                              Stefan Ritt wrote:                                  problem reading attached PDF files!, posted by Razvan Gornea on Sat Feb 21 03:53:42 2009  Hi, I was wondering if anybody else seen this problem and maybe has a solution. I use Elog version 2.7.5 rev. 2172 that I compiled from the tar.gz package       Re: problem reading attached PDF files!, posted by Stefan Ritt on Sat Feb 21 10:01:01 2009                              Razvan Gornea wrote:                                         Re: problem reading attached PDF files!, posted by Razvan Gornea on Sat Feb 21 21:13:43 2009                            Stefan Ritt wrote:                                                          Re: problem reading attached PDF files!, posted by Stefan Ritt on Mon Feb 23 09:53:09 2009                              Razvan Gornea wrote:                                               Re: problem reading attached PDF files!, posted by Razvan Gornea on Thu Feb 26 07:55:24 2009                            Stefan Ritt wrote:                                                             Re: problem reading attached PDF files!, posted by Razvan Gornea on Thu Feb 26 17:58:48 2009                            Stefan Ritt wrote:                                                No Valid Header?, posted by mike cianci on Tue Feb 24 12:44:27 2009  Stefan, I finally got it installed on a server at work (only took a year to work through all the red tape). I have seven logbooks up and running and only one is giving me trouble. It is an On-Line Help book where I wanted to store documents that could be referenced by our staff. It is the simplest of my       Re: No Valid Header?, posted by Stefan Ritt on Thu Feb 26 11:05:36 2009                              mike cianci wrote:                                  Text Limit for Subject line, posted by Robert Risher on Wed Feb 25 22:01:32 2009  Is there any way I can limit the ammount of characters in the Subject line? Thank you,       Re: Text Limit for Subject line, posted by Stefan Ritt on Thu Feb 26 10:01:37 2009                              Robert Risher wrote:                                  scrollable text section only when viewing a log entry, posted by Bill Pier on Wed Apr 23 01:55:16 2008  Is there a way, option, feature to setup the text section only to be scrollable when viewing a log entry, such that the header (meta info) section stays fixed?         Re: scrollable text section only when viewing a log entry, posted by Stefan Ritt on Wed Apr 23 07:46:56 2008                            Bill Pier wrote:                                            Is there a way, option, feature to setup the text section only to be scrollable when viewing a log entry,          Re: scrollable text section only when viewing a log entry, posted by Bill Pier on Thu Apr 24 23:52:45 2008                            Stefan Ritt wrote:                                                                         Re: scrollable text section only when viewing a log entry, posted by Stefan Ritt on Mon Apr 28 08:00:18 2008                            Bill Pier wrote:                                                                         Re: scrollable text section only when viewing a log entry, posted by Bill Pier on Tue May 6 21:28:18 2008 7x                           IStefan Ritt wrote:                                                                            Re: scrollable text section only when viewing a log entry, posted by Bill Pier on Thu Feb 19 18:19:12 2009                            Bill Pier wrote:                                                                               Re: scrollable text section only when viewing a log entry, posted by Stefan Ritt on Fri Feb 20 07:58:52 2009                              Bill Pier wrote:                                  Append a routine entry, posted by mike cianci on Fri Feb 20 05:00:40 2009  I am using the following commands to display the text of all of the entries at once (so that you can read them without having to click on each entry). Display mode = threaded Expand Default = 3   How to share with others, posted by Nuruzzaman on Wed Feb 18 20:03:12 2009  Please tell me how to share my elog with people.       Re: How to share with others, posted by Stefan Ritt on Wed Feb 18 20:14:04 2009                              Nuruzzaman wrote:                                  Attachments, posted by Steve Williamson on Fri Feb 6 12:08:49 2009  If I open an elog entry as read-only then attachments show as links which can be clicked to open the attachment.  However, if I open an entry using Edit then attachments show as text with a delete button - I would expect to be able to read attachments when editing an entry but there may be some good reason for not being able to.       Re: Attachments, posted by Stefan Ritt on Thu Feb 12 16:54:27 2009                              Steve Williamson wrote:                                         Re: Attachments, posted by Steve Williamson on Tue Feb 17 12:28:19 2009                            Stefan Ritt wrote:                                                Internal error, no valid header!, posted by ermirza erekose on Wed Feb 11 16:32:42 2009  I got this error message when trying to upload 17K text file as attachment.  Any idea why ? It's a fresh installed elog and not much configuration done yet. Thanks       Re: Internal error, no valid header!, posted by Stefan Ritt on Thu Feb 12 16:43:53 2009                              ermirza erekose wrote:                                         Re: Internal error, no valid header!, posted by ermirza erekose on Fri Feb 13 03:58:46 2009                            Stefan Ritt wrote:                                                          Re: Internal error, no valid header!, posted by ermirza erekose on Sat Feb 14 17:49:59 2009                            ermirza erekose wrote:                                                            Multi attribute email notification, posted by mike cianci on Tue Dec 2 23:23:34 2008  What I would like to do is: If attribute "A" and attribute  "B" - send email to person #1 If attribute "A" and attribute  "C" - send email to person #2       Re: Multi attribute email notification, posted by Stefan Ritt on Wed Dec 3 15:55:52 2008                              mike cianci wrote:                                         Re: Multi attribute email notification, posted by mike cianci on Wed Dec 3 22:57:13 2008  Your suggestion worked GREAT (like always)                                        Re: Multi attribute email notification, posted by John Rouillard on Sun Jan 11 00:02:34 2009                            mike cianci wrote:                                            Your suggestion worked GREAT (like always)                Re: Multi attribute email notification, posted by mike cianci on Mon Feb 9 07:58:46 2009                            John Rouillard wrote:                                                                       Re: Multi attribute email notification, posted by mike cianci on Mon Feb 9 07:58:58 2009                            John Rouillard wrote:                                                          Options Category : User\Admin, posted by Kim Rosmo on Fri Feb 6 10:47:11 2009  Hi :) First i have to say that i love this exelent program, and that it saved me Hours of trouble using it ^^       Re: Options Category : User\Admin, posted by Stefan Ritt on Fri Feb 6 10:58:14 2009                            Kim Rosmo wrote:                                           Hi :)          Re: Options Category : User\Admin, posted by Kim Rosmo on Fri Feb 6 11:42:40 2009                            Stefan Ritt wrote:                                                         Re: Options Category : User\Admin, posted by Stefan Ritt on Fri Feb 6 11:46:18 2009                            Kim Rosmo wrote:                                           Thanks for a fast reply :)   Error Message in HTML or Java Script alert, posted by Carsten Elftmann on Mon Oct 13 11:42:07 2008  Hello,   I have there a problem with the error message at required attributes.   I have two logbooks with identical settings, in one the errror message appears as Javascript Alert, in the other one as html-page, and after using the back button the entered text disapear. Same I have in this forum.   I restart the Server, and tested       Re: Error Message in HTML or Java Script alert, posted by Stefan Ritt on Wed Oct 29 05:35:05 2008                              Carsten Elftmann wrote:                                         Re: Error Message in HTML or Java Script alert, posted by Carsten Elftmann on Tue Jan 27 12:30:26 2009                            Stefan Ritt wrote:                                                          Re: Error Message in HTML or Java Script alert, posted by Stefan Ritt on Mon Feb 2 10:08:17 2009                              Carsten Elftmann wrote:                                  Incrementation of attribute is not functioning, help needed to fix this., posted by Guido Böing on Wed Jan 28 18:30:03 2009      Hello all,       Re: Incrementation of attribute is not functioning, help needed to fix this., posted by Stefan Ritt on Mon Feb 2 09:46:24 2009                              Guido Böing wrote:                                  Stack error when email notification is active, posted by Michael Ambrus on Tue Jan 20 15:20:38 2009  Stack error is caused when an entry is submitted in a e-mail notification enabled log when a new entry is submitted. This error does not happen on linux (same Elog version, same config file). Please let me know if there is anything I can do to help.       Re: Stack error when email notification is active, posted by Stefan Ritt on Tue Jan 20 15:37:19 2009                              Michael Ambrus wrote:                                         Re: Stack error when email notification is active, posted by Michael Ambrus on Tue Jan 20 16:07:03 2009                            Stefan Ritt wrote:                                                          Re: Stack error when email notification is active, posted by Michael Ambrus on Wed Jan 21 14:19:45 2009                            Michael Ambrus wrote:                                                                         Re: Stack error when email notification is active, posted by Stefan Ritt on Wed Jan 21 14:31:01 2009                              Michael Ambrus wrote:                                                  Re: Stack error when email notification is active, posted by Michael Ambrus on Wed Jan 28 14:38:52 2009                            Stefan Ritt wrote:                                                                Re: Stack error when email notification is active, posted by Michael Ambrus on Wed Jan 28 14:39:56 2009                            Stefan Ritt wrote:                                                Last day -- list menu command, posted by Mike Forster on Tue Jan 27 15:13:08 2009   Hi folks,  I want to have Last day be a command in the List display, so I added: List menu commands = New, Find,       Re: Last day -- list menu command, posted by Stefan Ritt on Tue Jan 27 15:45:52 2009                              Mike Forster wrote:                                         Re: Last day -- list menu command, posted by Mike Forster on Tue Jan 27 17:29:24 2009                              Stefan Ritt wrote:                                  Is it possible to generate an ID with a particular format ?, posted by Franck C on Tue Jan 27 15:55:38 2009  Hi, I want to know if it is possible to display an ID with this format: YYYY-XXXX where YYYY is the current year and XXXX a sequential number from 0001 to 9999 ?       Re: Is it possible to generate an ID with a particular format ?, posted by Stefan Ritt on Tue Jan 27 16:01:09 2009                              Franck C wrote:                                  convert: unrecognized option '-set', posted by Devin Bougie on Mon Jan 26 22:01:07 2009  Hello, We are now running elog-2.7.5 in a Scientific Linux 4 (RHEL4) system, which uses ImageMagick 6.0.7.1.  After uploading an image, the image        Re: convert: unrecognized option '-set', posted by Stefan Ritt on Tue Jan 27 09:19:22 2009  > Hello, >  > We are now running elog-2.7.5 in a Scientific Linux 4 (RHEL4) system, which uses ImageMagick 6.0.7.1.  After uploading an image, the image    more fun with SMTP and authentication...., posted by Topher Congdon on Mon Jan 26 18:52:56 2009  Great software. Okay, so I've done my reading through the forum and got a couple of nuggets along the way but I am still unable       Re: more fun with SMTP and authentication...., posted by Stefan Ritt on Tue Jan 27 09:03:22 2009  > For authentication via the Windows IIS I have "basic authentication" with no TLS encryption required - I'm  > not sure if that meets the provider's "SMTP authentication" requirement.  When I was using the previous version  > of ELOG (sorry, I did not note the version number) the username was encrypted along with the password.  With    Default value radio button, posted by Robert-Jan Schrijvers on Mon Jan 26 14:07:02 2009  hi there, Is it possible to attach a default value for a radio button when submitting a new form/record, for example:  I now have an item "Confirmed" Yes/No, and I want the "no" option to be selected by default when a new form/record       Re: Default value radio button, posted by Stefan Ritt on Mon Jan 26 14:16:03 2009                              Robert-Jan Schrijvers wrote:                                         Re: Default value radio button, posted by Robert-Jan Schrijvers on Tue Jan 27 08:06:54 2009                            Stefan Ritt wrote:                                                restrict a field to upper or lower case, posted by lisa giaime on Mon Jan 26 19:09:01 2009  Is it possiblet to restrict a field so that when a new record is added, whatever the user types is automatically converted to lower case? Thanks!       Re: restrict a field to upper or lower case, posted by Stefan Ritt on Mon Jan 26 19:48:42 2009                              lisa giaime wrote:                                  Import csv with another date, posted by Michael Dannmeyer on Fri Jan 9 13:20:25 2009  Hello, i have problems with importing csv files. What i want to do is the following: Import a list of log entries from a csv file with another date like the actual date       Re: Import csv with another date, posted by Stefan Ritt on Thu Jan 22 09:30:13 2009                              Michael Dannmeyer wrote:                                  SMTP problems - Error sending Email via "smtp.glocalnet.net", posted by Michael Ambrus on Mon Jan 12 23:36:17 2009  Hello, I'm having problems with e-mail notifications. When I try submitting a new post, I get the following error: Error sending Email via "smtp.glocalnet.net"       Re: SMTP problems - Error sending Email via "smtp.glocalnet.net", posted by Michael Ambrus on Tue Jan 13 00:14:37 2009                            Michael Ambrus wrote:                                            Hello, I'm having problems with e-mail notifications.          Re: SMTP problems - Error sending Email via "smtp.glocalnet.net", posted by Michael Ambrus on Wed Jan 14 16:39:38 2009                            Michael Ambrus wrote:                                                                      Re: SMTP problems - Error sending Email via "smtp.glocalnet.net", posted by Stefan Ritt on Tue Jan 20 17:18:06 2009                              Michael Ambrus wrote:                                  Top group causes: Internal error, no valid header!, posted by Michael Ambrus on Tue Jan 20 15:09:54 2009  Having "Top group" in a config-file for Windows will cause:   GET / HTTP/1.1       Re: Top group causes: Internal error, no valid header!, posted by Stefan Ritt on Tue Jan 20 15:17:04 2009                              Michael Ambrus wrote:                                         Re: Top group causes: Internal error, no valid header!, posted by Michael Ambrus on Tue Jan 20 15:26:03 2009                            Stefan Ritt wrote:                                                    Re: Top group causes: Internal error, no valid header!, posted by Michael Ambrus on Tue Jan 20 16:10:22 2009                            Michael Ambrus wrote:                                            Having "Top group" in a config-file for Windows will cause:   elog (2.6.1+r1642 ubuntu/debian) regularly becomes non-responsive (w/o crashing), posted by Peter Kovac on Mon Nov 27 17:29:41 2006  Greetings~   First, the problem.  Fairly regularly (at least once a week, perhaps more), our elog daemon seems to quietly die.  The process is still running but anyone       Re: elog (2.6.1+r1642 ubuntu/debian) regularly becomes non-responsive (w/o crashing), posted by Stefan Ritt on Tue Nov 28 10:34:54 2006  [quote="Peter Kovac"]First, the problem.  Fairly regularly (at least once a week, perhaps more), our elog daemon seems to quietly die.  The process is still running but anyone attempting to access the server gets "connection refused."  The elog log doesn't show anything and the apache logs just show "proxy: Error reading from remote server returned by [path]".  Calling a daemon restart doesn't seem to kill the daemon -- I get a "could not bind to port" error.          Re: elog (2.6.1+r1642 ubuntu/debian) regularly becomes non-responsive (w/o crashing), posted by Kevin O'Sullivan on Fri Jan 16 23:54:46 2009  I'm actually still having this issue in Ubuntu and I'm running elog version 2.7.5. In fact, now it's worse in 2.7.5 than in previous version because sometimes I have to restart the machine to get elog working again.             Re: elog (2.6.1+r1642 ubuntu/debian) regularly becomes non-responsive (w/o crashing), posted by John Rouillard on Sat Jan 17 08:16:19 2009  [quote="Kevin O'Sullivan"]I'm actually still having this issue in Ubuntu and I'm running elog version 2.7.5. In fact, now it's worse in 2.7.5 than in previous version because sometimes I have to restart the machine to get elog working again.   Display Revisions field in single entry but not in list view, posted by Dan C. on Wed Dec 17 19:43:25 2008  Hello,    Thank you for such a great software package!       Re: Display Revisions field in single entry but not in list view, posted by Stefan Ritt on Mon Dec 22 11:59:09 2008  The "Show Attributes" option is for the single entry view, while the "List Display" option is for the list view. So what you need is: [code]          Re: Display Revisions field in single entry but not in list view, posted by Dan C. on Thu Jan 15 22:25:05 2009  Hello Stefan,    Thanks for your reply.   Google Chrome issues, posted by kyoo on Wed Jan 7 19:54:18 2009   I use Google Chrome for web browsing these days..  I've had serious issues with surfing some of the pages of our ELOG V2.7.5-2130 site.  For instance,       Re: Google Chrome issues, posted by John Rouillard on Sat Jan 10 23:43:36 2009  > Any ideas? I run our ELOG on windows server.. maybe that has something to do with it. I am running the server on kubuntu 8.x, and have the same issue with chrome 1.x.          Re: Google Chrome issues, posted by kyoo on Sun Jan 11 22:48:38 2009  > > Any ideas? I run our ELOG on windows server.. maybe that has something to do with it. >  > I am running the server on kubuntu 8.x, and have the same issue with chrome 1.x.             Re: Google Chrome issues, posted by John Rouillard on Mon Jan 12 05:12:42 2009  > > > Any ideas? I run our ELOG on windows server.. maybe that has something to do with it. > >  > > I am running the server on kubuntu 8.x, and have the same issue with chrome 1.x.                Re: Google Chrome issues, posted by kyoo on Mon Jan 12 05:33:04 2009  > > > > Any ideas? I run our ELOG on windows server.. maybe that has something to do with it. > > >  > > > I am running the server on kubuntu 8.x, and have the same issue with chrome 1.x.                   Re: Google Chrome issues, posted by kyoo on Mon Jan 12 21:00:27 2009  > > > > > Any ideas? I run our ELOG on windows server.. maybe that has something to do with it. > > > >  > > > > I am running the server on kubuntu 8.x, and have the same issue with chrome 1.x.   ELOG scalability, posted by Devin Bougie on Fri Jan 9 22:40:59 2009  Hi, All.  We have been successfully using ELOG in a limited deployment for a couple years now.  However, we are about to  embark on a new project that could run for up to 10 years, and are wondering what sort of scalability we can expect from ELOG. Are there any problems we can expect to run into as the number of entries grow?  I see in a previous thread that "       Re: ELOG scalability, posted by Stefan Ritt on Sat Jan 10 09:58:43 2009                              Devin Bougie wrote:                                  elogd hangs when Date format in elogd.cfg, posted by Stefan Kanitz on Thu Jan 8 14:42:34 2009  Hi,   after setting        Re: elogd hangs when Date format in elogd.cfg, posted by Stefan Kanitz on Thu Jan 8 15:36:28 2009                            Stefan Kanitz wrote:                                            Hi,   Tooltips for MOptions - not working?, posted by Ben Shepherd on Fri Dec 19 14:15:28 2008  Hi, One of my logbooks is a fault reporting system; it emails a group of people when a fault is reported. There is an MOption 'Technical Groups', and I want to have a tooltip for each checkbox which shows who is referred to by each group name. However, individual tooltips for each MOption attribute don't       Re: Tooltips for MOptions - not working?, posted by Stefan Ritt on Mon Dec 22 08:52:20 2008                              Ben Shepherd wrote:                                         Re: Tooltips for MOptions - not working?, posted by Ben Shepherd on Tue Jan 6 15:11:53 2009                            Stefan Ritt wrote:                                                Standard login Screen - bottom text, posted by Barend on Fri Oct 17 20:40:39 2008  Hi Stefan. I have been "playing" around with this great tool and found an interesting "issue" ...       Re: Standard login Screen - bottom text, posted by Stefan Ritt on Thu Oct 30 04:28:05 2008                              Barend wrote:                                         Re: Standard login Screen - bottom text, posted by Barend on Thu Oct 30 21:14:32 2008                            Stefan Ritt wrote:                                                          Re: Standard login Screen - bottom text, posted by Stefan Ritt on Mon Nov 3 07:33:08 2008                            Barend wrote:                                            Stefan,                Re: Standard login Screen - bottom text, posted by Barend on Mon Dec 29 17:27:13 2008                            Stefan Ritt wrote:                                                            Problems with execute delete, posted by Stefan Kanitz on Tue Dec 23 11:02:26 2008  Hi all, i have problems with execute delete (execute new works fine) in following config (the attribute 'Counter' will not evaluated). Can anybody help me?       Re: Problems with execute delete, posted by Stefan Ritt on Tue Dec 23 11:34:25 2008                              Stefan Kanitz wrote:                                         Re: Problems with execute delete, posted by Stefan Kanitz on Tue Dec 23 12:17:06 2008                            Stefan Ritt wrote:                                                          Re: Problems with execute delete, posted by Stefan Ritt on Tue Dec 23 12:22:51 2008                              Stefan Kanitz wrote:                                               Re: Problems with execute delete, posted by Stefan Kanitz on Tue Dec 23 12:31:39 2008                            Stefan Ritt wrote:                                                lost elogd.cfg, posted by ribo on Fri Dec 19 14:59:29 2008    Hi I’m running SLES Linux Box with Elog 2.7.4, until yesterday everything was running perfectly. Now elog is not running anymore, because the elogd.cfg where i made changes for my use is lost.....(arghhhhh......) The logbooks ar still under /usr/local/elog/logbooks   deadc0de, posted by Niklas on Fri Aug 1 13:47:58 2008  Hi,   my ELOG sometimes dies with "deadc0de", do I have too large ELOG config or logbook? Or is it simply a bug?       Re: deadc0de, posted by Stefan Ritt on Mon Aug 4 09:00:43 2008                            Niklas wrote:                                            my ELOG sometimes dies with "deadc0de", do I have too large ELOG config or logbook? Or is it simply          Re: deadc0de, posted by Niklas on Thu Nov 13 19:27:02 2008                            Stefan Ritt wrote:                                                                         Re: deadc0de, posted by Niklas on Fri Nov 14 08:48:05 2008                            Niklas wrote:                                                                            Re: deadc0de, posted by Eoin Butler on Thu Dec 18 10:32:09 2008                            Niklas wrote:                                                                            Re: deadc0de, posted by Stefan Ritt on Thu Dec 18 10:39:57 2008                              Eoin Butler wrote:                                                     Re: deadc0de, posted by Eoin Butler on Thu Dec 18 11:16:37 2008                            Stefan Ritt wrote:                                                                      Re: deadc0de, posted by Stefan Ritt on Thu Dec 18 11:51:07 2008                              Eoin Butler wrote:                                  mysql in execute, posted by Stefan Kanitz on Fri Dec 12 08:57:41 2008  Hello all,   i have a question to mysql inexecute:       Re: mysql in execute, posted by Stefan Ritt on Fri Dec 12 09:16:19 2008                              Stefan Kanitz wrote:                                         Re: mysql in execute, posted by Stefan Kanitz on Sat Dec 13 14:31:53 2008                            Stefan Ritt wrote:                                                Attribute value lost when adding to another extendable attribute, posted by Dennis Seitz on Thu Dec 11 03:13:31 2008  Here is an excerpt from my config file: Type Last Edit = datetime  Preset Last Edit =$entry time        Re: Attribute value lost when adding to another extendable attribute, posted by Stefan Ritt on Fri Dec 12 08:07:59 2008                              Dennis Seitz wrote:                                         Re: Attribute value lost when adding to another extendable attribute, posted by Dennis Seitz on Sat Dec 13 02:13:51 2008                              Stefan Ritt wrote:                                  Conflict between Select-Edit and attribute types, posted by Richard Stamper on Thu Dec 11 17:50:35 2008  When doing a Select->Edit operation, if an attribute has a type of "numeric" and the records selected already have (some) values for that attribute, then the "- keep original values -" message that is inserted to indicate that the values should be preserved causes the type check to fail.       Re: Conflict between Select-Edit and attribute types, posted by Stefan Ritt on Fri Dec 12 07:45:14 2008                              Richard Stamper wrote:                                  Please add Subst on Duplicate, posted by Dennis Seitz on Tue Dec 9 00:25:52 2008   I would like to be able to substitute some attribute values when an entry is duplicated. I don't see Subst on Duplicate available in the cfg file syntax. Can you add that?         Re: Please add Subst on Duplicate, posted by Stefan Ritt on Tue Dec 9 08:04:00 2008                              Dennis Seitz wrote:                                         Re: Please add Subst on Duplicate, posted by Dennis Seitz on Wed Dec 10 03:11:01 2008                              Stefan Ritt wrote:                                  $entry time not readable by Subst, else not datetime type?, posted by Dennis Seitz on Wed May 7 17:10:07 2008  I posted this on the end of an earlier thread but I thought it might be better to repost as a separate thread:       Re: Re: $entry time not readable by Subst, else not datetime type?, posted by Dennis Seitz on Thu May 15 01:06:21 2008  [quote="Dennis Seitz"]I posted this on the end of an earlier thread but I thought it might be better to repost as a separate thread:          Re: Re: $entry time not readable by Subst, else not datetime type?, posted by Stefan Ritt on Mon Jun 2 12:01:47 2008  [quote="Dennis Seitz"]OK, now I realize how stupid I sound here. To partially answer my own question: $entry time is a string and Last Edit is now a number since I have changed it to the datetime type so that it will sort properly.             Re: Re: $entry time not readable by Subst, else not datetime type?, posted by Dennis Seitz on Mon Jun 2 23:41:15 2008  [quote="Stefan Ritt"][quote="Dennis Seitz"]OK, now I realize how stupid I sound here. To partially answer my own question: $entry time is a string and Last Edit is now a number since I have changed it to the datetime type so that it will sort properly.                Re: Re: $entry time not readable by Subst, else not datetime type?, posted by Stefan Ritt on Tue Jun 3 12:47:13 2008  [quote="Dennis Seitz"]Do you mean '$entry time', or did you create a new parameter? (I don't see $entry date in the elogd.cfg reference)[/quote] Yes, of course I mean '$entry time', sorry for the misspelling.                   Re: Re: $entry time not readable by Subst, else not datetime type?, posted by Dennis Seitz on Thu Jun 5 01:38:17 2008  [quote="Stefan Ritt"][quote="Dennis Seitz"]Do you mean '$entry time', or did you create a new parameter? (I don't see $entry date in the elogd.cfg reference)[/quote] Yes, of course I mean '$entry time', sorry for the misspelling.[/quote]                      Re: Re: $entry time not readable by Subst, else not datetime type? - possible Preset bug?, posted by Dennis Seitz on Fri Nov 21 18:21:36 2008  [quote="Dennis Seitz"][quote="Stefan Ritt"][quote="Dennis Seitz"]Do you mean '$entry time', or did you create a new parameter? (I don't see $entry date in the elogd.cfg reference)[/quote]                         Re: Re: $entry time not readable by Subst, else not datetime type? - possible Preset bug?, posted by Stefan Ritt on Mon Nov 24 20:00:05 2008  [quote="Dennis Seitz"]FYI, I think there's a little bug in the datetime vs $date implementation. Here's a section of my config file implementing a "Last Edit" field:                            Re: Re: $entry time not readable by Subst, else not datetime type? - possible Preset bug?, posted by Dennis Seitz on Tue Nov 25 17:01:55 2008  [quote="Stefan Ritt"][quote="Dennis Seitz"]FYI, I think there's a little bug in the datetime vs $date implementation. Here's a section of my config file implementing a "Last Edit" field:                               Re: Re: $entry time not readable by Subst, else not datetime type? - possible Preset bug?, posted by Dennis Seitz on Tue Dec 9 00:22:41 2008  [quote="Dennis Seitz"][quote="Stefan Ritt"][quote="Dennis Seitz"]FYI, I think there's a little bug in the datetime vs $date implementation. Here's a section of my config file implementing a "Last Edit" field:   Auto-increment attributes, posted by Steve Williamson on Wed Nov 26 10:00:25 2008  We have an auto-incrementing reference attribute defined as: # RFC       Re: Auto-increment attributes, posted by Steve Williamson on Fri Dec 5 16:14:19 2008                            Steve Williamson wrote:                                            We have an auto-incrementing reference attribute defined as:          Re: Auto-increment attributes, posted by Stefan Ritt on Mon Dec 8 10:09:14 2008  I finally found some time to address this problem. It is indeed related to the fact that the new number gets assigned when you click on 'New'. So if two people edit the new entries at the same time, they get assigned the same number. To fix this problem, I made the tag generation work with the 'Subst' command, which is evaluated at the entry submission, and not when you click on 'New'. So to make this work, you need to upgrade             Re: Auto-increment attributes, posted by Steve Williamson on Mon Dec 8 13:13:13 2008                            Stefan Ritt wrote:                                            I finally found some time to address this problem. It is indeed related to the fact that the new number   Change background color, posted by mike cianci on Sat Dec 6 22:30:56 2008  I copied the following line from the ELOG documentation file to my config file (with the appropriate changes to the attribute and value fields) and nothing happens. Am I missing something? Style importance severe = background-color:red Thanks for all your help.       Re: Change background color, posted by Stefan Ritt on Mon Dec 8 08:59:56 2008                              mike cianci wrote:                                  How to attach screen shot in elog, posted by weiluo on Tue Dec 2 01:10:39 2008  I want to know if there were some way to insert a screen shot directly into the log book instead of going through the "save-attach" procedure. i.e. add some plug in button to do this under Linux? Or, can I just make a plain log file "xxxx.log" and put it into the directory? Will that work?       Re: How to attach screen shot in elog, posted by Stefan Ritt on Tue Dec 2 10:20:52 2008                            weiluo wrote:                                            I want to know if there were some way to insert a screen shot directly into the log book instead of going through          Re: How to attach screen shot in elog, posted by weiluo on Tue Dec 2 17:10:05 2008                            Stefan Ritt wrote:                                                                         Re: How to attach screen shot in elog, posted by Stefan Ritt on Tue Dec 2 17:15:36 2008                              weiluo wrote:                                               Re: How to attach screen shot in elog, posted by weiluo on Tue Dec 2 17:18:10 2008                            Stefan Ritt wrote:                                                Installation problems, posted by George B. on Mon Oct 27 13:05:13 2008  Hello, I just upgraded to elog 2.7.5 from 2.6.4 on my Debian system. Here is some feedback:       Re: Installation problems, posted by Stefan Ritt on Wed Oct 29 05:53:39 2008  > 1) "make" fails if libssl-dev package is not installed. Documentation does not mention SSL library requirements. I added a note to the documentation, thank you.          Re: Installation problems, posted by George B. on Wed Nov 5 10:32:07 2008  > The elogd (or elogd.init in the distribution) is written for RedHat based systems where echo_success gives the  > typical output with a green [OK] at the end of the line. For Debian, there is (was) in principle a Debian package  > which has it's own startup script. Since the package maintainer is not active any more (I guess), the Debian           Re: Installation problems, posted by T. Ribbrock on Wed Nov 5 11:52:12 2008  > > 2) /etc/init.d/elogd: line 10: /etc/rc.d/init.d/functions: No such file or directory (I fixed this by commenting > > out that line). > >              elog init script, posted by Yoshio Imai on Mon Nov 10 13:05:21 2008  Notice that the following is not true [URL=https://midas.psi.ch/elog/adminguide.html#config]when editing the config file outside of the administrator's "Config" page[/URL]: [CODE]             Re: Installation problems, posted by Stefan Ritt on Mon Nov 17 11:42:46 2008  > I'm actually using elog on Debian and have been rolling my own ".deb" for a while now (starting with the old  Debian > Maybe you could add the Debian /etc/init.d/elog script to the "contrib"                Re: Installation problems, posted by T. Ribbrock on Thu Nov 27 11:47:34 2008  > The problem is not putting this into the "conrib" area, but supporting it. Since I don't have a Debian system,  > may I suggest that you put it yourself into the elog:Contributions/ logbook. If people then get problems in the  > future, they can contact you directly ;-)   Select -> Edit wipes dates, posted by T. Ribbrock on Mon Oct 27 12:42:47 2008  I just ran into the following bug: I have a logbook where entries have several attributes, among which several dates. All of these are set to "Type <attr> = date". If I use the "Select" action, tag several entries and subsequently chose "Edit", the values of all date attributes are wiped. All other       Re: Select -> Edit wipes dates, posted by Stefan Ritt on Tue Nov 18 13:56:59 2008                              T. Ribbrock wrote:                                         Re: Select -> Edit wipes dates, posted by T. Ribbrock on Thu Nov 27 11:36:53 2008                            Stefan Ritt wrote:                                             This problem has been fixed in revision 2.7.5-2143. Please upgrade.   Sort Attributes, posted by mike cianci on Thu Nov 27 07:02:51 2008  I am tring to sort  the attribute, subject, but it sorts with Z on top and A on the bottom. Is there anyway to reverse sort?       Re: Sort Attributes, posted by mike cianci on Thu Nov 27 08:21:40 2008                            mike cianci wrote:                                            I am tring to sort    Export of entries, posted by William De La Vega on Mon Nov 24 18:03:54 2008  I would like to export several entries out of a logbook I have with a specific subject.  I need to send these entries to someone who does not have elog nor can they install it. Is there a way to do this?       Re: Export of entries, posted by Stefan Ritt on Mon Nov 24 18:16:31 2008                              William De La Vega wrote:                                         Re: Export of entries, posted by William De La Vega on Wed Nov 26 18:01:21 2008                            Stefan Ritt wrote:                                                Special characters in attribute names, posted by Steve Williamson on Thu Nov 13 13:23:32 2008  Hi Thanks for elog - it's a brilliant piece of software.  I'd looked all over for open source software to log/manage change requests before discovering elog; it's so flexible that I've been able to do everything I need with it.       Re: Special characters in attribute names, posted by Stefan Ritt on Mon Nov 17 10:18:52 2008                              Steve Williamson wrote:                                         Re: Special characters in attribute names, posted by Steve Williamson on Mon Nov 24 13:49:56 2008                            Stefan Ritt wrote:                                                          Re: Special characters in attribute names, posted by Stefan Ritt on Mon Nov 24 17:53:23 2008  Thanks to your detailed description I could reproduce and fix the problem. Please download SVN revision #2144 and give it a try.                Re: Special characters in attribute names, posted by Steve Williamson on Wed Nov 26 12:49:08 2008                            Stefan Ritt wrote:                                            Thanks to your detailed description I could reproduce and fix the problem. Please download SVN revision   Threaded emails, posted by Paul O'Shaughnessy on Fri Nov 21 11:16:04 2008  Can you email a thread of log entries. I think this would be a very useful function, which would enable the logger in effect to send an entire history of a particular issue to the interested parties.       Re: Threaded emails, posted by Stefan Ritt on Fri Nov 21 11:28:31 2008                              Paul O'Shaughnessy wrote:                                         Re: Threaded emails, posted by Niall Dooley on Sun Nov 23 15:19:50 2008                            Stefan Ritt wrote:                                                          Re: Threaded emails, posted by Stefan Ritt on Mon Nov 24 09:50:16 2008                              Niall Dooley wrote:                                  Several drop down menu's for a field, posted by Niall Dooley on Sat Nov 22 13:08:59 2008  Hi, I was wondering if it is possible to have several drop down menus associated with a particular field. My problem is as follows, currently I have a particular field where its value is a name of a person obtained from a list of names from a drop down menu. However, I would like to be able to select       Re: Several drop down menu's for a field, posted by Stefan Ritt on Sat Nov 22 20:45:05 2008                              Niall Dooley wrote:                                  Quick filter in this forum, how to do "Text" search?, posted by Niklas on Fri Nov 21 09:12:31 2008  Hi,   In this forum there is a quickfilter for text search. How do I get that into my elog?       Re: Quick filter in this forum, how to do "Text" search?, posted by Stefan Ritt on Fri Nov 21 09:24:07 2008                              Niklas wrote:                                  Sorting Museremail, posted by Steve Williamson on Thu Nov 13 13:25:25 2008  Hi I've just upgraded to 2.7.5 mainly because I wanted to have Museremail sorted.  We use this to list contacts on an RFC form and it's much easier to find the ones you want when they are in a predictable sequence.  As an extension to this it would be great if they could be sorted by the       Re: Sorting Museremail, posted by Stefan Ritt on Mon Nov 17 10:08:01 2008                              Steve Williamson wrote:                                         Re: Sorting Museremail, posted by Steve Williamson on Mon Nov 17 12:07:18 2008                            Stefan Ritt wrote:                                                          Re: Sorting Museremail, posted by Stefan Ritt on Mon Nov 17 12:20:17 2008                              Steve Williamson wrote:                                               Re: Sorting Museremail, posted by Steve Williamson on Mon Nov 17 13:03:19 2008                            Stefan Ritt wrote:                                                                Re: Sorting Museremail, posted by Stefan Ritt on Tue Nov 18 09:13:26 2008                              Steve Williamson wrote:                                                     Re: Sorting Museremail, posted by Steve Williamson on Thu Nov 20 10:29:39 2008                            Stefan Ritt wrote:                                                elog client can set arbitrary values to locked attributes, posted by David Potterveld on Mon Nov 10 16:56:08 2008  When submitting entries via the elog client, I find that I can set arbitrary values for attributes that are supposedly "preset" and "locked". As an example, I have in my elogd.cfg file: [global]       Re: elog client can set arbitrary values to locked attributes, posted by Stefan Ritt on Mon Nov 17 11:20:28 2008                              David Potterveld wrote:                                         Re: elog client can set arbitrary values to locked attributes, posted by Stefan Ritt on Mon Nov 17 11:39:03 2008  Actually I found a way around. The "Subst xxx" is evaluated after you submit an entry, so it also works for the elog tool. So all you need in your config file is: Subst Author = $long_name and it will do the job.   thumbnails in list and entry views?, posted by Dennis Seitz on Thu Jun 5 02:06:31 2008  It would be very cool to be able to select Full from the view menu and then scroll rapidly through all entries looking for that high res photo of a SQUID chip I took two months ago. Presently the photos are all full size so the Full view is slow to load and it takes a lot of scrolling to navigate. Can you implement thumbnails in Full view, and also in the single entry view? Clicking on the thumbnail should, of course, open the full size image.       Re: thumbnails in list and entry views?, posted by Stefan Ritt on Thu Jun 5 08:25:11 2008                            Dennis Seitz wrote:                                            It would be very cool to be able to select Full from the view menu and then scroll rapidly through all          Re: thumbnails in list and entry views?, posted by Dennis Seitz on Mon Nov 10 19:10:44 2008                              Stefan Ritt wrote:                                            Re: thumbnails in list and entry views?, posted by Stefan Ritt on Mon Nov 17 11:10:24 2008                            Dennis Seitz wrote:                                           Sorry for the delayed reply.   Show/Hide links are displayed but don't work if Show attachments = 0, posted by Dennis Seitz on Mon Nov 10 19:40:43 2008  If I add this statement to a logbook config file: Show attachments = 0 When viewing and individual entry, attached images are not displayed, which is as intended, but the links Show/Hide and Show All/Hide All are still       Re: Show/Hide links are displayed but don't work if Show attachments = 0, posted by Stefan Ritt on Mon Nov 17 11:06:29 2008                              Dennis Seitz wrote:                                  Proxy Error, posted by Glen MacLachlan on Wed Nov 5 20:37:37 2008  A problem recently developed for our elog...after running without much problem the elog daemon was restarted on an ubuntu server running apache2. Now the server gives 502 Proxy Error messages:         Re: Proxy Error, posted by Stefan Ritt on Thu Nov 6 08:11:57 2008                              Glen MacLachlan wrote:                                  Server derived time, posted by Grant Jeffcote on Thu Oct 23 10:21:06 2008  Hi Stefan, Is it possible to derive the time in a 'date/time' attribute from the Elog server? We would like all our entries in GMT/UTC time and unfortunately as the time is currently derived from the client machines there are often entry       Re: Server derived time, posted by Stefan Ritt on Thu Oct 30 03:30:59 2008                              Grant Jeffcote wrote:                                         Re: Server derived time, posted by Grant Jeffcote on Thu Oct 30 08:39:34 2008                            Stefan Ritt wrote:                                                          Re: Server derived time, posted by Stefan Ritt on Mon Nov 3 13:15:52 2008                            Grant Jeffcote wrote:                                            I'm also having issues with conditional entries in the Find page. If a conditional statement is used to   (How) can I hide columns in List view?, posted by T. Ribbrock on Mon Oct 20 15:32:19 2008  Originally, all information about our machines was stored in a spreadsheet with one sheet for the hardware of the machines and one for the software. By now, I've sucessfully moved the software part to an elog logbook and am now looking at transferring the hardware part as well. As both lists are machine-name based, one of the options would be to merge both lists, as this would place all machine-related info into one logbook.       Re: (How) can I hide columns in List view?, posted by T. Ribbrock on Thu Oct 23 11:45:51 2008                            T. Ribbrock wrote:                               [...]             One thing I don't understand for example is how does elog decide in List view which entry sets the condition?       Re: (How) can I hide columns in List view?, posted by Stefan Ritt on Thu Oct 30 04:17:09 2008                              T. Ribbrock wrote:                                         Re: (How) can I hide columns in List view?, posted by T. Ribbrock on Thu Oct 30 09:44:25 2008  Thanks for the response! BTW: I did get a notification - but thanks for the "personal heads-up"!                                         Re: (How) can I hide columns in List view?, posted by T. Ribbrock on Thu Oct 30 11:05:11 2008                            Stefan Ritt wrote:                                            [...]   Error Message During Uploads, posted by Kevin O'Sullivan on Mon Oct 13 17:02:17 2008  We've been having toruble with uploads not working and I notice that every time someone uploads to our elog the same error message appears in /var/log/syslog: Cannot restore original GID/UID. How can I fix thsi error? Or, perhaps more importantly, could it cause elog to "lock up" (note, it doesn't crash)?       Re: Error Message During Uploads, posted by Stefan Ritt on Thu Oct 30 04:33:43 2008                              Kevin O'Sullivan wrote:                                  elogd crashes when creating new logbook using existing logbook as template, posted by David Potterveld on Thu Oct 23 23:45:01 2008  elogd is crashing with a segv when I try to create a new logbook by clicking the "Create new logbook" button with an existing logbook selected in the dropdown list as a template. I've attached my config file for reference. As a specific example, I'm logged in as the admin user, viewing logbook "1248", which has no entries,       Re: elogd crashes when creating new logbook using existing logbook as template, posted by Stefan Ritt on Thu Oct 30 03:10:00 2008  > elogd is crashing with a segv when I try to create a new logbook by clicking the "Create new logbook" button > with an existing logbook selected in the dropdown list as a template. I've attached my config file for > reference. As a specific example, I'm logged in as the admin user, viewing logbook "1248", which has no entries,   Elogd crashes, posted by soren poulsen on Wed Oct 22 12:44:48 2008  Hi   I am experiencing trouble with Elog crashing. I think it crashes during input operations (new entries are being added).       Re: Elogd crashes, posted by Stefan Ritt on Wed Oct 22 15:15:46 2008                              soren poulsen wrote:                                         Re: Elogd crashes, posted by soren poulsen on Thu Oct 23 08:12:06 2008  Dear Stefan, Thanks for your reply. I started running elog in February and it never failed. Then it started failing regularly towards the end of September. There were no system changes             Re: Elogd crashes, posted by Stefan Ritt on Wed Oct 29 07:07:47 2008                              soren poulsen wrote:                                  Guest Account doesnt work, posted by Brassmann on Mon Oct 13 13:06:59 2008  Hi , i have a little problem with the guest access. There is no acces to the logbooks as a guest. Evereytime i see the loginbox after clicking the logbook.       Re: Guest Account doesnt work, posted by Stefan Ritt on Wed Oct 29 05:41:02 2008                              Brassmann wrote:                                  Maximum number of mail recipients, posted by Steve Nahn on Sun Oct 12 20:40:32 2008  Just wondering if there is still a maximum number of mail recipients?  I saw  a number of 112 floating around in old forum entries, and I need more, like currently 300.  When I try it, the elogd hangs, not much output to speak of, but won't reply to Apache on its port.  Any quick fix (like changing a def'd variable somewhere?)       Re: Maximum number of mail recipients, posted by Stefan Ritt on Wed Oct 29 05:25:12 2008                              Steve Nahn wrote:                                  Possible to submit entries by email to logbook, posted by thorsten kamps on Fri Oct 17 16:59:42 2008  Hi, thanks to everyone involved for giving us the elog. A question: Is it possible to submit entries to an elog on a remote machine by email?       Re: Possible to submit entries by email to logbook, posted by Stefan Ritt on Fri Oct 17 18:06:04 2008                              thorsten kamps wrote:                                  Easy way to submit images from screenshots as new entry, posted by thorsten kamps on Fri Oct 17 17:03:02 2008  Hi, thanks for everyone involved for giving us the elog. A question: Is there an easy way (without intermediate save) to send screenshots (with irfan, snagit or hardcopy) as a new entry to an elog running on a remote       Re: Easy way to submit images from screenshots as new entry, posted by Stefan Ritt on Fri Oct 17 18:04:15 2008                              thorsten kamps wrote:                                  "Style" based on two MOptions - possible?, posted by T. Ribbrock on Tue Oct 14 10:29:34 2008  We have a logbook in which we use two "Status" attributes, both of which are MOptions. What we want to do is have the corresponding line of the list change its colour depending on the combination of those attributes. I have done so successfully using "Style" for a single Options or MOptions or even two Options (using conditionals and a third attribute), but up until now I have no luck with two MOptions. Conditionals do not seem to   Options selections wipes locked date entry, posted by T. Ribbrock on Mon Oct 13 15:24:29 2008  I have two logbooks running, one for current accounts and one for non-active ones. The idea is to move an entry from one logbook to the other once an account becomes non-active. Both logbooks share some attributes (e.g. the name of the account, its creation date, ...), but both also have some uniqe attributes. While I was playing with this set-up, I ran into a problem:   Author field read only in new posts, posted by Brassmann on Mon Oct 13 00:08:03 2008  Hi, how can i make the author field read only on new postings? It should take the value from $long_name after login and without login there is no way to make new postings.       Re: Author field read only in new posts, posted by Stefan Ritt on Mon Oct 13 10:37:27 2008                              Brassmann wrote:                                         Re: Author field read only in new posts, posted by Brassmann on Mon Oct 13 10:43:28 2008                            Stefan Ritt wrote:                                                       Re: Author field read only in new posts, posted by Brassmann on Mon Oct 13 10:43:30 2008                            Stefan Ritt wrote:                                                Deny Wildcards, posted by Neo on Wed Oct 8 15:10:25 2008  Ist there a possibility to use wildcards specifiing the users who are allowed to use a command, like ... Allow New = admin1, admin2, admin3 Allow Edit = admin1, admin2, admin3 Deny New = * Deny Edit = *       Re: Deny Wildcards, posted by Stefan Ritt on Wed Oct 8 15:23:56 2008                              Neo wrote:                               Ist          Re: Deny Wildcards, posted by Neo on Wed Oct 8 15:31:49 2008                            Stefan Ritt wrote:                                                          Re: Deny Wildcards, posted by Stefan Ritt on Wed Oct 8 21:37:32 2008                            Neo wrote:                                                Summary lines spill over, posted by Ben Shepherd on Fri Oct 3 15:29:01 2008  Hi, I've set up my ELOG configuration to display one summary line in the list view. However, a word from the next line creeps in from time to time. You can see this in my logbook - look at the 'Text' column for entries 805, 802 and 800 for instance.       Re: Summary lines spill over, posted by Stefan Ritt on Mon Oct 6 08:41:58 2008                              Ben Shepherd wrote:                                  Random Crashes, posted by Wythe IT on Thu Oct 2 19:00:25 2008  Running on windows server 2003.   Mysteriously from time to time i find ELOG has crashed and i must restart it.       Re: Random Crashes, posted by Stefan Ritt on Thu Oct 2 20:21:15 2008                              Wythe IT wrote:                                  Potential bug with the Quick filter, posted by Paul O'Shaughnessy on Mon Sep 22 16:46:32 2008  I have a muliple entry field, which is defined by MOptions, which allows you to make multiple selections into one field. My problem is that when I try to select this option from the Quick filter menu option, it brings back no entries. When I use the search option this works fine. Any ideas on where I go from here?       Re: Potential bug with the Quick filter, posted by Stefan Ritt on Mon Sep 22 21:31:36 2008                              Paul O'Shaughnessy wrote:                                         Re: Potential bug with the Quick filter, posted by Paul O'Shaughnessy on Tue Sep 23 15:03:51 2008                            Stefan Ritt wrote:                                                Moving individual messages in a thread, posted by Eoin Butler on Sat Sep 13 23:34:37 2008  It is possible that the Move to... and Copy to... commands can be configured so that when they operate on a message that is part of a thread, that only that message will be moved, instead of the whole thread?       Re: Moving individual messages in a thread, posted by Stefan Ritt on Thu Sep 18 14:39:17 2008                              Eoin Butler wrote:                                  Default list option, posted by George Chisholm on Wed Sep 17 19:14:45 2008  How do I set a default list option?  I have an attribute called Active with options yes, no When I do a list I want to see just the records having yes.       Re: Default list option, posted by Stefan Ritt on Wed Sep 17 22:41:18 2008                              George Chisholm wrote:                                  Install on Server 2003: , posted by Wythe IT on Mon Sep 15 16:22:39 2008  I am using Windows Server 2003 R2 Standard Edition.  It is up-to-date and a full legal version installed from a geniune MS disk (to put that notion out the way).  I host a variety of webpages from this server through IIS6.0. I am having an issue after installation of the ELOG software.  I grabbed the newest version from this website and ran the executable.        Re: Install on Server 2003: , posted by Stefan Ritt on Mon Sep 15 16:34:18 2008                              Wythe IT wrote:                                         Re: Install on Server 2003: , posted by Wythe IT on Mon Sep 15 18:49:33 2008                            Stefan Ritt wrote:                                                Is there a way to send email notification without attachment, posted by Samuel Morris on Mon Sep 8 14:22:10 2008  Is there any way to send email notification of only the message and not the attachment. We get entries consisting of 10 MBs sometimes, and we would like to send only the message and not the attachment in the email notification. I tried restricting postfix to 1MB and using Email Format = 111 but with no success.       Re: Is there a way to send email notification without attachment, posted by Stefan Ritt on Mon Sep 8 17:24:57 2008                            Samuel Morris wrote:                                           Is there any way to send email notification of only the message and not the attachment. We get entries consisting of 10 MBs sometimes, and          Re: Is there a way to send email notification without attachment, posted by Samuel Morris on Tue Sep 9 08:03:55 2008                            Stefan Ritt wrote:                                                                   Re: Is there a way to send email notification without attachment, posted by Stefan Ritt on Tue Sep 9 08:42:52 2008                              Samuel Morris wrote:                                               Re: Is there a way to send email notification without attachment, posted by Samuel Morris on Tue Sep 9 11:13:15 2008                            Stefan Ritt wrote:                                                                Re: Is there a way to send email notification without attachment, posted by Stefan Ritt on Tue Sep 9 11:55:59 2008                            Samuel Morris wrote:                                             Adding a new attribute is working fine... Has it to do with the elog 2.6.3 version and also I downloaded from ubuntu's synaptic                      Re: Is there a way to send email notification without attachment, posted by Samuel Morris on Mon Sep 15 08:27:16 2008                            Stefan Ritt wrote:                                                                               Re: Is there a way to send email notification without attachment, posted by Stefan Ritt on Mon Sep 15 08:51:57 2008                              Samuel Morris wrote:                                  Is there a way to limit users to view only the entries they have created?, posted by Herman Sherman on Mon Sep 8 23:17:59 2008  We are using elog to allow users to enter their time spent on a project and we would like them to be able to see the entries that they themselves have created but not the entries that other users have created. Thanks,       Re: Is there a way to limit users to view only the entries they have created?, posted by Stefan Ritt on Tue Sep 9 08:40:41 2008                              Herman Sherman wrote:                                         Re: Is there a way to limit users to view only the entries they have created?, posted by Herman Sherman on Tue Sep 9 16:12:45 2008                            Stefan Ritt wrote:                                                Search Find Selected or List of Logbooks instead of all Logbooks. , posted by Alan Stone on Thu Sep 4 20:49:59 2008  I am using the CMS ELog remotely as a monitoring tool.  Information is compartementalized into dozens of containers.  I can create a find query URL, say last day, which then reloads every X minutes in Firefox.  When new ELog entries are made, then appear in the refresh and catch my attention.  But, my interests are somewhere between a single logbook and all logbooks.  If I choose all CMS logbooks for example for one day, I usually end up       Re: Search Find Selected or List of Logbooks instead of all Logbooks. , posted by Stefan Ritt on Fri Sep 5 10:21:45 2008                            Alan Stone wrote:                                            I am using the CMS ELog remotely as a monitoring tool.  Information is compartementalized into dozens of containers.    Is there a way to indicate when an entry has been edited?, posted by Dennis Seitz on Thu May 15 19:57:23 2008   You've probably seen my other posts on this subject. I want to be able to re-edit some entries but I need some way to know the dates entries were re-edited. Am I just approaching this the wrong way? Should I disable re-editing of entries and use threads to follow changes by posting replies to an entry?       Re: Is there a way to indicate when an entry has been edited?, posted by Stefan Ritt on Fri Jun 6 11:26:37 2008                            Dennis Seitz wrote:                                             You've probably seen my other posts on this subject.          Re: Is there a way to indicate when an entry has been edited?, posted by W.Koster on Tue Sep 2 16:03:31 2008                            Stefan Ritt wrote:                                                                      Re: Is there a way to indicate when an entry has been edited?, posted by Stefan Ritt on Tue Sep 2 16:07:34 2008                            W.Koster wrote:                                                            Grabbing user name from SSL user certificate, posted by Davide Salomoni on Mon Aug 25 17:23:22 2008  With SSL enabled, I'd like to to grab the CN (Common Name) of the user certificate and use that as login authentication method. I am thinking of the following scenario: - users with read & write privileges need to have an SSL certificate loaded in their browser. The "Author" field will be pre-set       Re: Grabbing user name from SSL user certificate, posted by Stefan Ritt on Mon Sep 1 13:48:29 2008                            Davide Salomoni wrote:                                            With SSL enabled, I'd like to to grab the CN (Common Name) of the user certificate and use that as login   Expand TEXT colum in Summary view?, posted by dale cooper on Mon Aug 18 10:56:05 2008  Hello All, I am wondering if it is possible to configure ELOG to expand the TEXT column in the SUMMARY view? As it stands I get about 48 characters displayed per line in the in the TEXT column, with 3 lines getting displayed per ENTRY (approximately 144 characters per ENTRY). So what I'd like       Re: Expand TEXT colum in Summary view?, posted by Yoshio Imai on Mon Aug 18 14:08:22 2008  [quote=dale cooper]I am wondering if it is possible to configure ELOG to expand the [B]TEXT[/B] column in the [I]SUMMARY[/I] view?[/quote] While it is not possible to specify a number of characters per row, you can control the number of text lines in the summary view using the [CODE]Summary lines = NNN[/CODE]   Copy & Move To in Spanish, posted by Marimar Rodriguez on Mon Aug 11 20:35:16 2008  Hi, when I choose the Spanish language, the command Copy To isn't allowed. I have had to change the language file and  change the line: Copy To = Copiar a       Re: Copy & Move To in Spanish, posted by Stefan Ritt on Tue Aug 12 08:42:58 2008                            Marimar Rodriguez wrote:                                            when I choose the Spanish language, the command Copy To isn't allowed. I have had to change the   Using the command line tool to edit, posted by T. Ribbrock on Thu Aug 7 10:12:25 2008  I intend to create a script that updates one of our elog logbooks based on mails it receives. I was hoping to be able to do this using the "elog" command line tool. Adding a new entry works fine, as does "replying" to an existing entry. The only thing I cannot get to work is editing an existing entry. All entries ahve several attributes and I intend not to use the "message" itself. I tried the following (on the machine this elogd is running on):       Re: Using the command line tool to edit, posted by Yoshio Imai on Fri Aug 8 14:27:03 2008  [quote=T. Ribbrock][B]NOTE:[/B] I found that this does [i]not[/i] work if LOGBOOK has any spaces in it - I would get error messages where the logbook was not found.[/quote]          Re: Using the command line tool to edit, posted by T. Ribbrock on Fri Aug 8 14:50:56 2008  [quote="Yoshio Imai"][quote=T. Ribbrock][B]NOTE:[/B] I found that this does [i]not[/i] work if LOGBOOK has any spaces in it - I would get error messages where the logbook was not found.[/quote]       Re: Using the command line tool to edit, posted by Stefan Ritt on Mon Aug 11 11:02:18 2008                            T. Ribbrock wrote:                                            I intend to create a script that updates one of our elog logbooks based on mails it receives. I was hoping          Re: Using the command line tool to edit, posted by T. Ribbrock on Mon Aug 11 15:14:40 2008                            Stefan Ritt wrote:                                            I fixed two things:   2 questions :: different colors in list view based on "type" + change verbage of "type", posted by dale cooper on Fri Aug 8 00:44:26 2008  hello all, #1 i love ELOG : excellent app! i would like to ask/present a question here -- I have a couple of TYPE's defined as;        Options Type = Day Shift, Swing Shift, Night Shift       Re: 2 questions :: different colors in list view based on "type" + change verbage of "type", posted by Yoshio Imai on Fri Aug 8 14:20:27 2008  [quote=dale cooper]I'd love to display in the LIST VIEW (full, summary, or threaded views) different color's based on which TYPE was selected...[/quote] You can achieve this by using a "style" directive for this attribute. E.g. if your attribute is called "Shift" and entries with value "Day" should be green, value "Swing" should be blue, you should add          Re: 2 questions :: different colors in list view based on "type" + change verbage of "type", posted by dale cooper on Mon Aug 11 06:56:56 2008  PERFECT, you answered my questions EXACTLY with what I am looking for! thanks soo much! agentdcooper   html code in reply window, posted by Tom Plancon on Thu Jul 31 17:16:20 2008  Hello, Recently upgraded to 2.7.3 and I'm seeing html code filling up the reply window. Before I would just see [quote] and [/quote] around the original entry. Did I miss something in the upgrade? Thanks!       Re: html code in reply window, posted by Stefan Ritt on Thu Jul 31 17:22:23 2008                            Tom Plancon wrote:                                            Hello,   Exploit Browser Tabs to Make Anonymous Entries, posted by Alan Stone on Wed Jul 30 19:54:28 2008  One of my shifters just managed to make an anonymous logbook entry even though the Author attribute is required. It turns out that he had two tabs in his browser opened/logged into the Elog.  He logged out in one tab only.   Then he did some other work on the desktop.  Then he returned to the browser to make a new logbook entry, finding the tab which       Re: Exploit Browser Tabs to Make Anonymous Entries, posted by Stefan Ritt on Thu Jul 31 09:25:01 2008                            Alan Stone wrote:                                            One of my shifters just managed to make an anonymous logbook entry even though the Author attribute is   Elogd.exe crashes almost everyday, posted by jh on Tue Jul 29 17:50:51 2008  My Elog running on windows 2003 sp1 is crashing with this error "  Faulting application elogd.exe, version 0.0.0.0, faulting module elogd.exe, version 0.0.0.0, fault address 0x00061330."  the version of elogd.exe is  has a built date of 2/22/2008.  Will upgrading to the latest windows binary resolve this issue?    Thanks!!       Re: Elogd.exe crashes almost everyday, posted by Stefan Ritt on Wed Jul 30 10:06:57 2008                            jh wrote:                                            My Elog running on windows 2003 sp1 is crashing with this error "  Faulting application elogd.exe,   WINDOWS binaries with latest fixes., posted by Franck C on Thu Jul 24 11:21:54 2008  Hi, When the WINDOWS binaries with the latest bug fixes will be available on the download page ? Have a nice day        Re: WINDOWS binaries with latest fixes., posted by Stefan Ritt on Thu Jul 24 11:28:30 2008                            Franck C wrote:                                            Hi,   Thumbnails not working, posted by Kevin O'Sullivan on Tue Jul 22 23:23:17 2008  I get the following error where thumbnails should go: Cannot create thumbnail, please check ImageMagick installation. I restarted elog and check the log, it does in fact detect ImageMagick and it does have the most recent version. I'm running ubuntu 2.6.24-19-server.  Is there something else I should be checking?       Re: Thumbnails not working, posted by Stefan Ritt on Wed Jul 23 15:14:58 2008                            Kevin O'Sullivan wrote:                                            I get the following error where thumbnails should go: Cannot create   preset type useremail with current user, posted by Peter Hirschbichler on Wed Jul 23 11:26:12 2008  Hi, I would like to preset an attribute type useremail with $user_email but that does not work because $user_email contains mailto: like mailto:user_email@domain Has anyone an idea how to resolve this problem?       Re: preset type useremail with current user, posted by Stefan Ritt on Wed Jul 23 15:06:59 2008                            Peter Hirschbichler wrote:                                            Hi, I would like to preset an attribute type useremail with $user_email   Elog crashing with "segfault" during file upload, posted by Jesse Wodin on Thu Jul 17 01:16:49 2008  Hi there, I just compiled and installed elog on a machine running the newest Ubuntu server. Everything went fine - no problems. Running elog on it's own (no apache).  I moved over a bunch of logbooks from an older elog, which seemed to work. Now, elog seems to crash when people are uploading files. Here is a snip from my syslog, and you can see each time it crashes with "error 4."       Re: Elog crashing with "segfault" during file upload, posted by Jesse Wodin on Fri Jul 18 08:18:18 2008                            Jesse Wodin wrote:                                            Hi there, I just compiled and installed elog on a machine running the newest Ubuntu server. Everything   TCK-##### stopped Working, posted by Don Perrea on Mon Jul 14 16:25:21 2008  We have been successfully using the TCK-##### for several months and suddenly today it has stopped incrementing. We were at ticket # 40 and this morning any new tickets come up as 12 and never increment? We have tried restarting the elog service. Any suggestions would be appreciated.         Re: TCK-##### stopped Working, posted by Don Perrea on Mon Jul 14 17:19:13 2008                            Don Perrea wrote:                                            We have been successfully using the TCK-##### for several months and suddenly today it has stopped incrementing.   TCK-##### stopped Working, posted by Don Perrea on Mon Jul 14 16:23:26 2008      Synchronising between physically separate networks, posted by Dougie Mooney on Thu Jul 10 12:06:31 2008  Hi there. Just started recently set up the application and think its very usable and easily configured - great stuff  I'm looking to roll it out to the masses but have a slight logistical problem in that we work on 2 separate networks - NET1 with connection to       Re: Synchronising between physically separate networks, posted by Stefan Ritt on Thu Jul 10 12:46:52 2008                            Dougie Mooney wrote:                                            Hi there. Just started recently set up the application and think its very usable and easily configured   Error messages while creating thumbnails, posted by Yoshio Imai on Wed Jul 9 19:57:50 2008  Hi again! I have recently noticed that [I]elog[/I] often creates large accumulations of the following group of error messages in our syslog:   Icon and Quick filter, posted by Franck C on Tue Jun 17 11:42:20 2008  Hi, I have defined a quick filter based on an icon attribute and it does not work: no result. I have defined something like your "forum elog" (with Icon comment ): in the quick filter, i see the comments (that a good thing) but whatever i'm selecting, i have no entry.       Re: Icon and Quick filter, posted by Stefan Ritt on Mon Jun 23 12:40:12 2008                            Franck C wrote:                                            Hi,          Re: Icon and Quick filter, posted by Franck C on Tue Jul 1 16:56:53 2008                            Stefan Ritt wrote:                                                                      Re: Icon and Quick filter, posted by Stefan Ritt on Thu Jul 3 08:25:10 2008  Ok, now I got the point. I fixed this problem in elog revision #2114. Quick filters are now working with icons:                Re: Icon and Quick filter, posted by Franck C on Thu Jul 3 16:22:31 2008                            Stefan Ritt wrote:                                            Ok, now I got the point. I fixed this problem in elog revision #2114. Quick filters are now working with   Sorting Museremail, posted by Steve Williamson on Mon Jun 30 10:55:29 2008  We use elog for (amongst other things) a simple change management log.  About two dozen users allowed to do updates and their email addresses are listed at the bottom of the page  to allow any of them to be included on circulation for a change request.  The email addresses appear in the order that they were added (i.e. apparently random).  Is there any way to sort these, ideally by Last part of Full Name/First part of Full Name, but login       Re: Sorting Museremail, posted by Stefan Ritt on Thu Jul 3 08:57:32 2008                            Steve Williamson wrote:                                            We use elog for (amongst other things) a simple change management log.  About two dozen users   browse for hyperlink target?, posted by George Chisholm on Thu Jun 26 22:53:59 2008  Just upgraded to v2.7.4 and really like the new editor but I need to be able to browse for the correct file when inserting a hyperlink.  I looked into CKfinder but can't see how to use this with ELOG.  Can anyone help?  We have been using ELOG in our control center for about a year and it is working out great!       Re: browse for hyperlink target?, posted by Stefan Ritt on Fri Jun 27 11:45:09 2008                            George Chisholm wrote:                                            Just upgraded to v2.7.4 and really like the new editor but I need to be able to browse for          Re: browse for hyperlink target?, posted by George Chisholm on Fri Jun 27 18:31:08 2008                            Stefan Ritt wrote:                                                                      Re: browse for hyperlink target?, posted by Stefan Ritt on Sat Jun 28 10:10:54 2008                                         George Chisholm wrote:                                                            Mass postings, posted by mike cianci on Sat May 3 14:59:14 2008  I am setting this up as instrument log in a multi-hospital system, where there will be multiple instruments, in multiple departments, at multiple facilities. I am using the "Top Group" function to keep the books separate so operators from one instrument/department/facility don't contaminate another instrument/department/facility's logbook.       Re: Mass postings, posted by Stefan Ritt on Mon May 5 08:44:03 2008                            mike cianci wrote:                                            I am setting this up as instrument log in a multi-hospital system, where there will be multiple instruments,          Re: Mass postings, posted by Erik Iverson on Mon Jun 9 15:57:15 2008                            Stefan Ritt wrote:                                                            multi-headings, posted by parrish on Sat Jun 7 01:43:52 2008  how can you have more than 1 heading like in this forum. Example is: Demo and Discusion and have diferent sub heading under each one? So example if Demo is selected you get one group of tabs to select from and if Discussion is selected you get a different second set of tabs to choise from.       Re: multi-headings, posted by Stefan Ritt on Sat Jun 7 11:10:48 2008                            parrish wrote:                                            how can you have more than 1 heading like in this forum. Example is: Demo and Discusion and have diferent   Conditional Attributes Boolean?, posted by Grant Jeffcote on Mon May 19 06:14:04 2008  Hi Stefan, After searching the manual and not finding (missing?) the answer is it possible to add conditional statements to a Boolean attribute? I would like a tick       Re: Conditional Attributes Boolean?, posted by Stefan Ritt on Fri Jun 6 11:24:49 2008  [quote="Grant Jeffcote"]After searching the manual and not finding (missing?) the answer is it possible to add conditional statements to a Boolean attribute? I would like a tick box to be able to trigger an event when submitted.[/quote]   Make Email All = <list> override Suppress Email checkbox, posted by Dennis Seitz on Wed May 21 21:06:38 2008   I would like to be notified by email of some logbook entries regardless of whether the user has chosen to suppress email or not. This way I will always be aware of new entries, and users will still have the option of notifying a larger group of other users, or not. As far as I can tell, presently the Suppress Email checkbox overrides Email All.       Re: Make Email All = <list> override Suppress Email checkbox, posted by Stefan Ritt on Mon Jun 2 12:22:48 2008                            Dennis Seitz wrote:                                             I would like to be notified by email of some logbook entries regardless of whether the user has chosen          Re: Make Email All = <list> override Suppress Email checkbox, posted by Dennis Seitz on Mon Jun 2 23:30:39 2008                              Stefan Ritt wrote:                                            Re: Make Email All = <list> override Suppress Email checkbox, posted by Stefan Ritt on Tue Jun 3 12:50:04 2008                            Dennis Seitz wrote:                                                             Re: Make Email All = <list> override Suppress Email checkbox, posted by Dennis Seitz on Thu Jun 5 01:36:07 2008                                                   Re: Make Email All = <list> override Suppress Email checkbox, posted by Stefan Ritt on Thu Jun 5 08:17:59 2008                            Dennis Seitz wrote:                                            Hmm. Is there some way to set up a private RSS feed for me only?   using elog client in secure mode, posted by Luc Goossens on Mon May 19 16:02:23 2008  Hi, I am trying to enter a log record in secure mode into a log book hosted on an apache server (v2.7.2). After reading this forum I have recompiled  the client using revision 2100 (well actually the head of svn).       Re: using elog client in secure mode, posted by Stefan Ritt on Mon Jun 2 12:17:53 2008                            Luc Goossens wrote:                                            I am trying to enter a log record in secure mode into a log book hosted on an apache server (v2.7.2).   "preview attachement" flag not working on thumbnails ?, posted by Bruno Serfass on Fri May 23 20:56:43 2008  Hi, I would like to turn off the display of attachements when editing an entry in some of our logbooks that contains big file.        Re: "preview attachement" flag not working on thumbnails ?, posted by Stefan Ritt on Mon Jun 2 12:08:00 2008  > I would like to turn off the display of attachements when editing an entry in some of our logbooks that contains big file.  > So I did set the flag "preview attachements"  to 0. It seems to work fine on text file attachment but  > the  thumbnails for PDF and images (very nice feature by the way!...) are still there...   Possible to sort attribute chronologically? , posted by Dennis Seitz on Tue Jan 29 04:25:11 2008  Hi, We've defined a "LastEdit" attribute for some of our logs so that we can indicate that an entry has been revised, and when that was done.        Re: Possible to sort attribute chronologically? , posted by Stefan Ritt on Tue Jan 29 08:02:41 2008  > Hi, >  > We've defined a "LastEdit" attribute for some of our logs so that we can indicate that an entry has been revised, and when that was done.           Re: Possible to sort attribute chronologically? , posted by Stefan Ritt on Tue Jan 29 08:09:50 2008  > The only caveat is that > when you edit an entry, the "Last Edit" is displayed really in seconds since 1970, but I will > fix this in the next release.             Re: Possible to sort attribute chronologically? , posted by Dennis Seitz on Thu Feb 7 01:33:03 2008  > > The only caveat is that > > when you edit an entry, the "Last Edit" is displayed really in seconds since 1970, but I will > > fix this in the next release.             Re: Possible to sort attribute chronologically? , posted by Dennis Seitz on Tue Apr 29 02:00:03 2008  > > The only caveat is that > > when you edit an entry, the "Last Edit" is displayed really in seconds since 1970, but I will > > fix this in the next release.                Re: Possible to sort attribute chronologically? , posted by Stefan Ritt on Mon Jun 2 11:11:27 2008  > I tried to use the command > Subst on edit Last Edit = $entry time > but it gives a "-" for the Last Edit value when I edit an entry.    Can u send me the configuration file for this logbook ?, posted by Franck C on Fri Mar 28 13:48:41 2008  Hi, I try to set up a logbook and i wanted to create something with icons (like this logbook) and it will be easier for me if i have ur config file  Thanks a lot       Re: Can u send me the configuration file for this logbook ?, posted by Stefan Ritt on Tue Apr 1 08:04:18 2008                            Franck C wrote:                                            Hi, I try to set up a logbook and i wanted to create something with icons (like this logbook) and it will be easier          Re: Can u send me the configuration file for this logbook ?, posted by Franck C on Fri May 9 14:04:42 2008                            Stefan Ritt wrote:                                                                      Re: Can u send me the configuration file for this logbook ?, posted by Stefan Ritt on Fri May 23 13:38:52 2008                            Franck C wrote:                                                            Help me please I can't uplode Attach file, posted by Samrit on Thu Apr 17 05:28:56 2008  Dear All I can't uplode Attach file. It have Error                           Error: Filename "D:\aaa.doc" contains invalid character                               Please       Re: Help me please I can't uplode Attach file, posted by Stefan Ritt on Thu Apr 17 08:27:27 2008                            Samrit wrote:                                            Dear All          Re: Help me please I can't uplode Attach file, posted by Mark Soohoo on Sun May 18 06:20:00 2008                            Stefan Ritt wrote:                                                            reset password link when using proxy, posted by Devin Bougie on Thu May 15 18:36:55 2008  For heightened security, we allow access to our ELOG installation from offsite through an apache proxy.  Therefore, the URL for our ELOG becomes http://www.lepp.cornell.edu/proxy/elog/ .  Everything seems to work properly with this setup except for the "reset password" utility.  When trying to reset ones password, the link sent in the "Password recovery" email becomes, for example:   Extending attribute list, posted by Paul O'Shaughnessy on Fri May 2 00:58:04 2008  Hello everyone, I am new to the forum. I currently have an attribute which is a list. From this drop down menu, I can only access around 100 options (ELog restriction I think). How can I extend my drop down list to say 200?       Re: Extending attribute list, posted by Stefan Ritt on Mon May 5 08:51:10 2008                            Paul O'Shaughnessy wrote:                                            Hello everyone, I am new to the forum.          Re: Extending attribute list, posted by Paul O'Shaughnessy on Tue May 6 14:49:54 2008                            Stefan Ritt wrote:                                                                      Re: Extending attribute list, posted by Stefan Ritt on Tue May 6 15:17:52 2008                            Paul O'Shaughnessy wrote:                                                                         Re: Extending attribute list, posted by Paul O'Shaughnessy on Wed May 7 17:33:54 2008                            Stefan Ritt wrote:                                                                            Re: Extending attribute list, posted by Stefan Ritt on Wed May 7 19:55:30 2008               I can get my hand on a C compiler. What the process involved?                           Re: Extending attribute list, posted by Paul O'Shaughnessy on Thu May 8 09:44:48 2008                            Stefan Ritt wrote:                                                            any support of encrypted logfiles?, posted by Bill Pier on Tue May 6 21:40:05 2008  I'm sure this topic has been visited previously, but a search of this forum didn't show any results. Is there are support or already proven method of encrypting the logfiles that Elog serves up?         Re: any support of encrypted logfiles?, posted by Stefan Ritt on Tue May 6 21:47:32 2008                            Bill Pier wrote:                                            I'm sure this topic has been visited previously, but a search of this forum didn't show any results.   configuration of rss feeds, posted by W.Koster on Fri Apr 25 14:49:41 2008  Is it possible to change what is being shown in the rss-feed ? (like only name, date and subject in the list and text and other attributes in the text-pane below the rss-feed list (I hope you can figure out what I mean). Regards, W.       Re: configuration of rss feeds, posted by Stefan Ritt on Fri Apr 25 17:19:27 2008                            W.Koster wrote:                               Is it possible to change what is being shown in the rss-feed ? (like only name, date and subject in the list and text and          Re: configuration of rss feeds, posted by W.Koster on Mon Apr 28 13:37:01 2008  > Have you tried the RSS Title option? doh ... thanks, works perfectly (well apart from the lost end-of-lines in the text portion)   Increment a field automatically on a new thread vs every entry, posted by Chuck Brost on Thu Apr 24 22:18:24 2008  I may have missed it when reading the logs, if so, sorry about that, but I would like to know if there is a way to set a field, let us call it "process run"  Ok let me give you some details on this. a process run may have several "work orders" or sets of parts/items in it, so it will have several separate entries in the log        Re: Increment a field automatically on a new thread vs every entry, posted by Chuck Brost on Fri Apr 25 19:33:24 2008  Ok, nevermind that one, Dumb Question I think, now that I have figured out that the field I was concerned with does not increment in a reply already.  So.. that only leaves my one question, is there somewhere that I can change the text, not the action, on the menu so that I can do a reply, but have the link list as something like "New Item".?          Re: Increment a field automatically on a new thread vs every entry, posted by Stefan Ritt on Sat Apr 26 09:26:53 2008                            Chuck Brost wrote:                                            Ok, nevermind that one, Dumb Question I think, now that I have figured out that the field I was concerned   how to set locale for date/time, posted by svrmarty on Thu Mar 27 14:15:12 2008  it seems out systemlang is en_US, #date Thu Mar 27 14:11:59 CET 2008       Re: how to set locale for date/time, posted by Stefan Ritt on Fri Apr 4 08:20:06 2008                            svrmarty wrote:                                            it seems out systemlang is en_US,          Re: how to set locale for date/time, posted by svrmarty on Sun Apr 6 21:13:27 2008                            Stefan Ritt wrote:                                                                Re: how to set locale for date/time, posted by Stefan Ritt on Wed Apr 9 22:14:05 2008                            svrmarty wrote:                                            it seems out systemlang is en_US,          Re: how to set locale for date/time, posted by svrmarty on Mon Apr 21 16:14:53 2008                            Stefan Ritt wrote:                                                                      Re: how to set locale for date/time, posted by Stefan Ritt on Tue Apr 22 09:30:24 2008                            svrmarty wrote:                                                                         Re: how to set locale for date/time, posted by svrmarty on Fri Apr 25 14:52:26 2008                            Stefan Ritt wrote:                                                                            Re: how to set locale for date/time, posted by Stefan Ritt on Fri Apr 25 17:15:12 2008                            svrmarty wrote:                                                                                  Re: how to set locale for date/time, posted by svrmarty on Fri Apr 25 19:56:48 2008                            Stefan Ritt wrote:                                                            LaTeX support, posted by Jochen Krempel on Wed Apr 23 18:59:30 2008  I would appreciate if elog could provide a simple support for mathematical expressions. A solution similar to wikimedia should be easy to implement and would help a lot. http://www.mediawiki.org/wiki/Manual:Running_MediaWiki_on_Windows#Alternative_Solution       Re: LaTeX support, posted by Stefan Ritt on Thu Apr 24 07:51:23 2008                            Jochen Krempel wrote:                                            I would appreciate if elog could provide a simple support for mathematical expressions.   Request: elog as a "web service" ? (xml / soap), posted by Willem Koster on Wed Apr 23 10:53:58 2008  We're using elog as our CMDB, but now management wants us to employ "web services" and I fear going to another tool (elog is fitting the admins like a glove, so we'd rather keep it) Is it possible to configure elog to be able to run as a web-service ?  (basically getting xml-output according to a specific (SOAP) schema       Re: Request: elog as a "web service" ? (xml / soap), posted by Stefan Ritt on Wed Apr 23 11:51:06 2008                            Willem Koster wrote:                                            We're using elog as our CMDB, but now management wants us to employ "web services" and I fear   conditional options are not working in find , posted by Arno Teunisse on Sat Apr 5 13:56:42 2008  Hello In my config file I have the following : Options Head = AIX61{1},AIX53{2}, AIX52{3},HMC{4},CL_CLUSTER{5},VIRTUALIZATION{6},MICROCODE{7},BG_BLUEGENE{8}       Re: conditional options are not working in find , posted by Stefan Ritt on Thu Apr 17 22:17:05 2008                            Arno Teunisse wrote:                                            Would be nice if the user can search with the same items he used entering the data into the form.          Re: conditional options are not working in find , posted by Arno Teunisse on Thu Apr 17 22:40:12 2008                            Stefan Ritt wrote:                                                                      Re: conditional options are not working in find , posted by Arno Teunisse on Thu Apr 17 23:20:50 2008                            Arno Teunisse wrote:                                                                        Re: conditional options are not working in find , posted by Stefan Ritt on Fri Apr 18 07:47:54 2008                            Arno Teunisse wrote:                                            Just noticed that in IExplorer and Firefox when creating a new entrie i got a popup with the following text in it                   Re: conditional options are not working in find , posted by Arno Teunisse on Fri Apr 18 20:30:12 2008                            Stefan Ritt wrote:                                                            Problems with elog client, posted by Yoshio Imai on Wed Apr 9 14:41:12 2008  Hi!   Since our upgrade to elog 2.7.3, it is not possible any more to edit an existing elog entry using the elog client with -e <id> option.       Re: Problems with elog client, posted by Stefan Ritt on Wed Apr 9 23:03:53 2008                            Yoshio Imai wrote:                                            Since our upgrade to elog 2.7.3, it is not possible any more to edit an existing elog entry using the elog          Re: Problems with elog client, posted by Yoshio Imai on Thu Apr 10 14:21:13 2008  I have tried the new revision, recompiling both client and server. Unfortunately, the overall situation has not changed. We can still create new entries using the [I]elog[/I] client, but editing an existing entry still does not work. However, thanks to your patch, the [I]-v[/I] option now works again for the client side:             Re: Problems with elog client, posted by Stefan Ritt on Thu Apr 10 15:39:26 2008  [quote="Yoshio Imai"] [CODE]> elog -s -h elog -p 443 -l current -u <user> <password> -e 1 "EDIT THIS ENTRY" -v Successfully connected to host elog, port 443                Re: Problems with elog client, posted by Yoshio Imai on Thu Apr 10 15:56:12 2008  [quote="Stefan Ritt"]As I wrote in my previous message, the "SSL part has not been tested" (=means: does not work).[/quote] Sorry for the misunderstanding. I was probably confused because the creation of new entries already worked, even with SSL.             Re: Problems with elog client, posted by Stefan Ritt on Tue Apr 15 20:34:49 2008  [quote="Yoshio Imai"]Another thing: I have noticed that when using conditional preset texts, the "Preset Text =" statements have to be declared for each logbook of a logbook group; it is not sufficient to only declare it in the "[global]" section of the logbook group. This means that we only need to declare the conditions once, e.g.                Re: Problems with elog client, posted by Yoshio Imai on Thu Apr 17 19:11:36 2008  I have tried your sample config file, and this one also works for me. The problem arises when using top groups. I have produced a minimal config file including a top group, of the form [CODE]                   Re: Problems with elog client, posted by Stefan Ritt on Thu Apr 17 21:23:06 2008  [quote="Yoshio Imai"]The problem arises when using top groups.[/quote] Uff, that was a tough one. Thanks to your detailed analysis I could reproduce the problem. It indeed only happens with conditional 'preset text' under                      Re: Problems with elog client, posted by Yoshio Imai on Fri Apr 18 14:17:52 2008  [quote="Stefan Ritt"]I fixed that in SVN revision 2103, please download and test it.[/quote] I just downloaded and tested it. It works!!   Custom Links in each column, in the display list?, posted by Don Perrea on Thu Apr 17 19:56:41 2008  Using the "Link Display  =" I can turn of the link to each         individual entry, however, I would like to have a custom link in one of my columns. Is this possible?         Re: Custom Links in each column, in the display list?, posted by Stefan Ritt on Thu Apr 17 20:22:30 2008                            Don Perrea wrote:                                            Using the "Link Display  =" I can turn of the link to each         individual entry, however,   Sticky entries?, posted by Peter Freeman on Sun Apr 6 06:17:00 2008  Hi, I'm evaluate currently if we can use ELOG as an shiftbook. So far I like ELOG very much, but I got a question. Is it possible to have sticky message entries? Entries that always show up on top of the others. Thats for important entries that are valit for multiple shifts.        Re: Sticky entries?, posted by Peter Freeman on Thu Apr 10 01:33:07 2008                            Peter Freeman wrote:                                            Hi, I'm evaluate          Re: Sticky entries?, posted by Stefan Ritt on Thu Apr 10 07:48:08 2008                            Peter Freeman wrote:                                                                      Re: Sticky entries?, posted by Peter Freeman on Fri Apr 11 00:15:42 2008                            Stefan Ritt wrote:                                                                         Re: Sticky entries?, posted by Peter Freeman on Sat Apr 12 05:21:11 2008                            Peter Freeman wrote:                                                                            Re: Sticky entries?, posted by Stefan Ritt on Mon Apr 14 08:46:41 2008                            Peter Freeman wrote:                                            EDIT: Just downloaded the latest version and   attachment indicator in summary view, posted by Dennis Seitz on Tue Apr 1 21:24:17 2008   It would be nice to have the option of including an attachment indicator column in summary view to show if an entry has any attachments. Thanks.       Re: attachment indicator in summary view, posted by Stefan Ritt on Fri Apr 4 22:06:48 2008                            Dennis Seitz wrote:                                             It would be nice to have the option of including an attachment indicator column in summary view to show if          Re: attachment indicator in summary view, posted by Edmundo T Rodriguez on Fri Apr 4 22:53:17 2008                            Stefan Ritt wrote:                                                                      Re: attachment indicator in summary view, posted by Stefan Ritt on Mon Apr 7 10:01:27 2008                            Edmundo T Rodriguez wrote:                                                                   Re: attachment indicator in summary view, posted by Dennis Seitz on Sat Apr 5 00:43:21 2008                              Stefan Ritt wrote:                                            Re: attachment indicator in summary view, posted by Grant Jeffcote on Sat Apr 12 22:04:58 2008  Hi Stefan, When using  2.7.3-2095 I can't seem to get the paperclip/s to show,  just an additional field in the summary view (named Attachments) with the attachment file names below? Am I missing something?                Re: attachment indicator in summary view, posted by Stefan Ritt on Sun Apr 13 16:04:09 2008                            Grant Jeffcote wrote:                                            When using  2.7.3-2095 I can't seem to get the paperclip/s to show,  just an additional field in the summary   Manual installing elog as service on Windows, posted by Arno Teunisse on Sat Apr 12 16:37:44 2008  Hello Sometimes it can come in handy to start a temporary elog service on the Windows platform. ( Maybe for testing purposes ) You can use the SC.exe utility to do that. If it is not on you're system you may download it from : ftp://ftp.microsoft.com/reskit/win2000/sc.zip   e-mail format, posted by Bill Qualls on Tue Apr 1 21:07:39 2008  I "upgraded" from v2.6.? to v2.7.3.  By "upgrade", I mean "copy all files to a different computer, then run the installer".  e-mail messages received from my v2.6 instance look nice.  The messages look like HTML tables with blue and green coloring.  My v2.7 instance appears to send plain text.  But, when I forward the v2.7 message, the nice HTML tables appear again.  Is there an e-mail formatting       Re: e-mail format, posted by Stefan Ritt on Thu Apr 3 08:37:27 2008                            Bill Qualls wrote:                                            I "upgraded" from v2.6.? to v2.7.3.  By "upgrade", I mean "copy all   FCKeditor not active, posted by Kevin O'Sullivan on Mon Mar 24 19:40:03 2008  I'm using ELOG version 2.7.3-2058 and have been trying to get FCKeditor to work. This, to my understanding from the documentation, is supposed to be a part of elog by default after version 2.7.0 and from looking at the configuration syntax manual, it looks as though FCKeditor should be on with the default settings. I done nothing to turn it off and none of the obvious fixes seem to do anything. I've posted the text of my configuration file below, what did       Re: FCKeditor not active, posted by Stefan Ritt on Thu Mar 27 07:15:03 2008                            Kevin O'Sullivan wrote:                                            I'm using ELOG version 2.7.3-2058 and have been trying to get FCKeditor to work. This, to my understanding       Re: FCKeditor not active, posted by Alain Hugentobler on Wed Apr 2 01:27:20 2008                            Kevin O'Sullivan wrote:                                            I'm using ELOG version 2.7.3-2058 and have been trying to get FCKeditor to work. This, to my understanding          Re: FCKeditor not active, posted by Kevin O'Sullivan on Wed Apr 2 03:34:43 2008                            Alain Hugentobler wrote:                                                                   Re: FCKeditor not active, posted by Stefan Ritt on Wed Apr 2 09:19:55 2008                            Alain Hugentobler wrote:                                                            Duplicate entry suggestion, posted by Dennis Seitz on Tue Apr 1 02:04:35 2008   We have configured several logbooks to allow users to duplicate an entry in another logbook, which is very useful for entries which apply to more than one category. However, once the entry is duplicated, subsequent revisions to the original entry are not copied to the duplicate entries.       Re: Duplicate entry suggestion, posted by Stefan Ritt on Tue Apr 1 08:01:02 2008                            Dennis Seitz wrote:                                             We have configured several logbooks to allow users to duplicate an entry in another logbook, which          Re: Duplicate entry suggestion, posted by Dennis Seitz on Tue Apr 1 20:31:26 2008                              Stefan Ritt wrote:                                  change language, posted by svrmarty on Tue Mar 25 14:00:53 2008  i've installed the debian package on my system there's only one config file, /etc/elog.conf i've tried to change the language, in [global] with Language = german,       Re: change language, posted by Stefan Ritt on Thu Mar 27 07:52:00 2008                            svrmarty wrote:                                            i've installed the debian package on my system          Re: change language, posted by svrmarty on Thu Mar 27 09:23:25 2008                            Stefan Ritt wrote:                                                                      Re: change language, posted by svrmarty on Thu Mar 27 09:30:03 2008                                         svrmarty wrote:                                                            how to sort entry, posted by jee on Thu Mar 27 05:58:40 2008  hi:   I have a problem with elog,   if there are many entrys, and i want to find  some useful  entries  which i preseted  before ,like entries with        Re: how to sort entry, posted by Stefan Ritt on Thu Mar 27 06:18:05 2008                            jee wrote:                                            hi:          Re: how to sort entry, posted by jee on Thu Mar 27 09:05:05 2008                            Stefan Ritt wrote:                                                                      Re: how to sort entry, posted by Stefan Ritt on Thu Mar 27 09:10:46 2008                            jee wrote:                                                German language, posted by Salvatore on Sat Mar 1 14:47:27 2008  In der Config-Datei habe ich den Eintrag "language = german" vorgenommen. Was unter Windows funktioniert, verweigert mir Linux: Die Umstellung des Logs auf Deutsch. Wer kann helfen? Salvatore       Re: German language, posted by Stefan Ritt on Sat Mar 1 14:53:16 2008                            Salvatore wrote:                                            In der Config-Datei habe ich den Eintrag "language = german" vorgenommen. Was unter Windows funktioniert,          Re: German language, posted by Salvatore on Sat Mar 1 16:47:57 2008  Wen es interessiert: der Eintrag "eloglang = german" gehoert in das Verzeichnis "usr/lib/elog/resources". Dort wird er von elogd ausgelesen.                                Re: German language, posted by Stefan Ritt on Thu Mar 6 14:12:28 2008                            Salvatore wrote:                                            Wen es interessiert:                Re: German language, posted by svrmarty on Thu Mar 20 23:46:42 2008                            Stefan Ritt wrote:                                                            still having email problems, posted by mike cianci on Mon Mar 10 15:09:56 2008  I no longer get an error message when I try to send an email (I get the "email sent" message) but the email never arrives. Thank you (in advance) for any help. My elog.log looks like:       Re: still having email problems, posted by Stefan Ritt on Mon Mar 10 15:19:06 2008  The transcript below looks all ok to me, so it's most likely that the email went to your Spam folder.                                        mike cianci wrote:          Re: still having email problems, posted by mike cianci on Mon Mar 10 17:58:06 2008                            Stefan Ritt wrote:                                            The transcript below             Re: still having email problems, posted by An Thai on Mon Mar 10 18:31:58 2008                            mike cianci wrote:                                                            Message ID and trouble ticketing system, posted by lance on Sat Nov 24 03:16:46 2007  I am trying to create a trouble ticket system however when you do a reply you get a new message ID.  I was hoping to use the message ID as a ticket number and just wanted to use the reply as an append to the orginal message id, however each reply creates a new message id. This would be a nightmare to track and if I closed the ticket I would have to close every log entry related to this.       Re: Message ID and trouble ticketing system, posted by Stefan Ritt on Mon Nov 26 14:33:59 2007                            lance wrote:                                            I am trying to create a trouble ticket system however when you do a reply you get a new message ID.  I          Re: Message ID and trouble ticketing system, posted by lance on Mon Nov 26 16:58:26 2007                            Stefan Ritt wrote:                                                                      Re: Message ID and trouble ticketing system, posted by Richard Ecclestone on Fri Feb 15 15:46:38 2008                            lance wrote:                                                                         Re: Message ID and trouble ticketing system, posted by Stefan Ritt on Thu Feb 21 08:04:50 2008                            Richard Ecclestone wrote:                                                                Re: Message ID and trouble ticketing system, posted by Stefan Ritt on Fri Mar 7 14:29:00 2008                            Stefan Ritt wrote:                                                                               Re: Message ID and trouble ticketing system, posted by Stefan Ritt on Fri Mar 7 14:45:02 2008                            David wrote:                                            When I was browsing this forum about my previous problem, I found  this thread. A ticket number that applies                         Re: Message ID and trouble ticketing system, posted by Stefan Ritt on Fri Mar 7 20:42:39 2008  Ok, now I got the point, also Richard had the same problem. Assume we have 10 threads, and thus ticket numbers 1-10. Now we get a reply to #2, which then pops up to the top of the list. A new message increments the top entry of all entries, and then wrongly gives a new #3, instead of #11. I fixed this in SVN revision 2073, where elogd searches all logbook entries for the largest index, then increments this one by one.                            Re: Message ID and trouble ticketing system, posted by David Pilgram on Fri Mar 7 21:26:18 2008  >Stefan Ritt wrote: > >Ok, now I got the point, also Richard had the same problem. Assume we have 10 threads, and thus                                Re: Message ID and trouble ticketing system, posted by David Pilgram on Fri Mar 7 21:53:28 2008  >>Stefan Ritt wrote: >> >>Ok, now I got the point, also Richard had the same problem. Assume we have 10 threads, and thus    email subject, posted by Bill Whiting on Fri Mar 7 13:44:34 2008  Can I control the content of the Subject on an email notification? i.e. Can I copy the subject from the elog entry into the email subject?         Re: email subject, posted by Bill Whiting on Fri Mar 7 14:09:40 2008                            Bill Whiting wrote:                                            Can I control the content of the Subject on an email notification?   Quick filter by ID, posted by David Pilgram on Tue Mar 4 14:03:00 2008  Hi, I've just upgraded from 2.6.2 to 2.7.3.       Re: Quick filter by ID, posted by Stefan Ritt on Thu Mar 6 15:06:35 2008  > Hi, >  > I've just upgraded from 2.6.2 to 2.7.3.          Re: Quick filter by ID, posted by David Pilgram on Fri Mar 7 13:12:37 2008  > > Hi, > >  > > I've just upgraded from 2.6.2 to 2.7.3.   #include statements and attachment visibility, posted by Yoshio Imai on Thu Feb 28 19:07:19 2008  Hi! First of all, thank you again for the great software and all the support.       Re: #include statements and attachment visibility, posted by Stefan Ritt on Thu Mar 6 14:03:17 2008  [quote="Yoshio Imai"]Recently, one collaborator here noted that it would be helpful if the preview of attached files could be disabled on a file-by-file basis (via a checkbutton next to the "Upload" button maybe?). This applies e.g. to cases where someone performs a measurement outside of routine operations and attaches the ASCII data file (preview not wanted, in particular if it contains many lines) and the graph representing the evaluation (preview wanted).          Re: #include statements and attachment visibility, posted by Yoshio Imai on Thu Mar 6 18:19:48 2008  Thanks you! I just installed the new revision, and it works. However, it does not seem to work in list mode (with attach=1 option): elog still shows [I]all[/I] the lines of attached text files there.             Re: #include statements and attachment visibility, posted by Stefan Ritt on Fri Mar 7 08:01:44 2008  [quote="Yoshio Imai"]However, it does not seem to work in list mode (with attach=1 option): elog still shows [I]all[/I] the lines of attached text files there.                Re: #include statements and attachment visibility, posted by Yoshio Imai on Fri Mar 7 13:07:34 2008  Thank you, works perfectly!   Problem with Email Notification, posted by mike cianci on Sat Mar 1 07:40:18 2008  Sorry to bother you with this, but I am not a programmer and this is probably a simple question but I need some help if someone has the time. Under Global I have the command   -  SMTP host  = smtp.comcast.net ELOG responds with  -  Error sending Email via "smtp.comcast.net": 5.1.0 sender rejected : invalid sender domain       Re: Problem with Email Notification, posted by Stefan Ritt on Sat Mar 1 15:08:07 2008                            mike cianci wrote:                                            Sorry to bother you with this, but I am not a programmer and this is probably a simple question but I need some help   Problem updating from 2.7.2 to 2.7.3, posted by Uwe on Tue Feb 26 03:06:06 2008  Hello, I am trying to update from version V2.7.2-2041  to V2.7.3 but getting the attached error message. OS is Windows 2003. I installed the update on Windows XP without a problem. Does anybody know ho to solve that problem? Thanks!       Re: Problem updating from 2.7.2 to 2.7.3, posted by Stefan Ritt on Wed Feb 27 03:46:28 2008                            Uwe wrote:                                            Hello,          Re: Problem updating from 2.7.2 to 2.7.3, posted by Uwe on Thu Feb 28 01:56:53 2008                            Stefan Ritt wrote:                                                            elog hand once mirror started, posted by stephane on Thu Feb 21 12:55:56 2008  Hello, When I started elogd on the mirror server, I can access to the website on it until cron job started. Once cron job started, the elog mirror server hang and I can't obtain any response on it.       Re: elog hand once mirror started, posted by Stefan Ritt on Thu Feb 21 14:36:32 2008                            stephane wrote:                                            Hello,          Re: elog hand once mirror started, posted by stephane on Thu Feb 21 15:09:25 2008                            Stefan Ritt wrote:                                                                      Re: elog hand once mirror started, posted by Stefan Ritt on Thu Feb 21 17:18:55 2008                            stephane wrote:                                                             Re: elog hand once mirror started, posted by stephane on Fri Feb 22 06:32:48 2008                            Stefan Ritt wrote:                                                                            Re: elog hand once mirror started, posted by stephane on Fri Feb 22 08:38:38 2008                            stephane wrote:                                                            elog hand on destination mirror server, posted by stephane on Thu Feb 21 12:50:53 2008  Hello, When I start elogd on the mirror destination server, until cron job started, I can access to the website normaly. Once cron job started, I can't access to the website of the elog mirror destination server.   error "Cannot retrieve host name: No error" using command line in Windows, posted by Dan Gawarecki on Fri Feb 15 22:55:11 2008  I automatically install software on 3 machines in our lab, and at the end of the process, use eLOG to record relevant information for each machine (all running Windows XP) via the command line program elog.exe.  2 of the machines log their info correctly, but on third machine, I get the following error:       Re: error "Cannot retrieve host name: No error" using command line in Windows, posted by Stefan Ritt on Mon Feb 18 07:03:29 2008                            Dan Gawarecki wrote:                                            I automatically install software on 3 machines in our lab, and at the end of the process, use eLOG to record          Re: error "Cannot retrieve host name: No error" using command line in Windows, posted by Dan Gawarecki on Mon Feb 18 17:25:42 2008  Stefan: Thanks for the analysis and information.  Why am I not surprised that the "No error" came from Windows!?  I tried some of your suggestions with the following results:             Re: error "Cannot retrieve host name: No error" using command line in Windows, posted by Stefan Ritt on Mon Feb 18 17:51:49 2008                            Dan Gawarecki wrote:                                            QUESTION:  does command line ELOG connect differently than ELOG through the browser?                Re: error "Cannot retrieve host name: No error" using command line in Windows, posted by Dan Gawarecki on Mon Feb 18 22:20:02 2008  Since both my machine and the Elog server PC are inside my company's "security zone", I am not running a firewall on my machine.   For what it's worth:  in trying to research the "No error" message, I did come across this information on MS's website; that is,   elog crashing on startup, posted by Jeff Stoner on Fri Feb 15 22:24:38 2008  I installed elog 2.7.2 rev 2041 into /data/elog on Redhat ES 4 Update 4. This is my initial elogd.cfg file: [global]port = 80       Re: elog crashing on startup, posted by Stefan Ritt on Mon Feb 18 08:00:44 2008                            Jeff Stoner wrote:                                            I create 14 of them, one for every 2 letters of the English alphabet and 0-9. The logbook name and Subdir   move mxml code into elog's src directory, posted by Jeff Stoner on Fri Feb 15 03:16:45 2008  The mxml source code should be moved into the elog-*/src directory. This requires changing the Makefile to: MXMLDIR = src/mxml Reason for change: if you want to build several versions of elog and you unpack the distributions in the same top-level directory, the most recently       Re: move mxml code into elog's src directory, posted by Stefan Ritt on Fri Feb 15 06:59:52 2008                            Jeff Stoner wrote:                                            The mxml source code should be moved into the elog-*/src directory. This requires changing the Makefile   Absolut links for images in FCK Editor, posted by Jochen Krempel on Thu Feb 7 14:22:57 2008  We use ELOG inside a local network, but we want to allow access also from outside the firewall. The suggested solution from Elog Admin Guide worked fine until version ELOG V2.6.5-1844 (essentially without FCK Editor):       Re: Absolut links for images in FCK Editor, posted by Stefan Ritt on Mon Feb 11 17:28:33 2008                            Jochen Krempel wrote:                                            We use ELOG inside a local network, but we want to allow access also from outside the firewall.          Re: Absolut links for images in FCK Editor, posted by Jochen Krempel on Tue Feb 12 23:57:52 2008                            Stefan Ritt wrote:                                                            Data Export:: Date Problem, posted by Richard Ecclestone on Mon Feb 11 22:16:33 2008  Hi Im currently experimenting with Elog to see if we can use it to track maintenance work. But Ive come up against a problem, When I export the data to a csv file,       Re: Data Export:: Date Problem, posted by Stefan Ritt on Mon Feb 11 22:24:37 2008                            Richard Ecclestone wrote:                                            Hi          Re: Data Export:: Date Problem, posted by Stefan Ritt on Mon Feb 11 22:33:37 2008                            Stefan Ritt wrote:                                                                      Re: Data Export:: Date Problem, posted by Richard Ecclestone on Tue Feb 12 08:54:48 2008                            Stefan Ritt wrote:                                                                         Re: Data Export:: Date Problem, posted by Richard Ecclestone on Tue Feb 12 10:52:17 2008                            Richard Ecclestone wrote:                                                                         Re: Data Export:: Date Problem, posted by Stefan Ritt on Tue Feb 12 11:42:01 2008                            Richard Ecclestone wrote:                                            Our IT administrator has just downloaded and installed the latest source code from                      Re: Data Export:: Date Problem, posted by Richard Ecclestone on Tue Feb 12 20:40:53 2008                            Stefan Ritt wrote:                                                            'Deactivate' Options, posted by Uwe on Mon Feb 11 19:22:25 2008  Hello, one question regard Options: For e. g. I am using the following command: Options Categories = NT, 2000, XP, Linux Now I would like to delete the entry NT. But that would cause, that NT is no longer available in the search function. So I wonder if there is a       Re: 'Deactivate' Options, posted by Stefan Ritt on Mon Feb 11 19:48:11 2008                            Uwe wrote:                                            one question regard Options: For e. g. I am using the following command: Options Categories = NT, 2000, XP,          Re: 'Deactivate' Options, posted by Uwe on Mon Feb 11 19:52:09 2008                            Stefan Ritt wrote:                                                            Cross references within ELOG, posted by Richard Hardwick on Wed Jan 30 10:28:50 2008  How can I make a cross reference from one entry to another entry in the same ELOG logbook?       Re: Cross references within ELOG, posted by Stefan Ritt on Wed Jan 30 10:37:20 2008                            Richard Hardwick wrote:                                            How can I make a cross reference from one entry to another entry in the same ELOG logbook?          Re: Cross references within ELOG, posted by Richard Hardwick on Wed Jan 30 19:22:23 2008                            Stefan Ritt wrote:                                                                      Re: Cross references within ELOG, posted by Stefan Ritt on Mon Feb 11 13:34:53 2008                            Richard Hardwick wrote:                                                            FCK Editor + spell check, posted by stephane on Mon Feb 4 11:44:42 2008  Hello, How do I proceed to have spell check in fck editor under linux / firefox ? Kind regards       Re: FCK Editor + spell check, posted by Stefan Ritt on Mon Feb 4 14:40:33 2008                            stephane wrote:                                            How do I proceed to have spell check in fck editor under linux / firefox ?   Several attachement at the same time, posted by stephane on Sat Jan 26 08:59:35 2008  Hello, I would like to make several attachement at the same time. I would be great cause I have lot of attachements to do every day. I try wiht CTRL or SHIFT key but I failed in.       Re: Several attachement at the same time, posted by Stefan Ritt on Sat Jan 26 10:34:57 2008                            stephane wrote:                                            Hello,          Re: Several attachement at the same time, posted by stephane on Sat Jan 26 11:13:38 2008                            Stefan Ritt wrote:                                                                Re: Several attachement at the same time, posted by Stefan Ritt on Wed Jan 30 08:01:23 2008                            stephane wrote:                                            I would like to make several attachement at the same time. I would be great cause I have lot of attachements   Update of FCKeditor inside ELOG requires browser cache cleaning, posted by Stefan Ritt on Mon Jan 28 09:26:26 2008  Between the ELOG versions 2.7.0 and 2.7.1 the internal HTML editor FCKedit has been upgraded from version 2.4.3 to 2.5beta. The new version has a few more options and supports more browsers. People however reported some errors popping up like Unknown toolbar item "ELOGSubmit". This happens because some browsers cache the JavaScript from the old version of the editor in their cache. To fix this problem,   Converting dates from an Excel import into ELOG, posted by Fergus Lynch on Thu Jan 24 13:50:10 2008  Hi, I'm importing an Excel spreadsheet into ELOG through CSV format.  All working fine apart from dates. Dates are exporting from Excel in the format "day/month/year" so 1st January 2008 is exported as 01/01/2008 in the CSV.       Re: Converting dates from an Excel import into ELOG, posted by Fergus Lynch on Thu Jan 24 16:50:16 2008                            Fergus Lynch wrote:                                            Hi,   inline button for upload image, posted by stephane on Wed Jan 23 15:37:58 2008  Hello, In elog version 2.7.1.2004, when I want to upload an image, after browsing I obtain a error message like < Upload command not unauthorized>. That is strange is the file is right uploaded in the logbook directory but not appear in the entry.       Re: inline button for upload image, posted by Stefan Ritt on Wed Jan 23 16:09:10 2008                            stephane wrote:                                            Hello,          Re: inline button for upload image, posted by stephane on Wed Jan 23 16:15:56 2008                            Stefan Ritt wrote:                                                                      Re: inline button for upload image, posted by Stefan Ritt on Wed Jan 23 16:23:29 2008                            stephane wrote:                                                             Re: inline button for upload image, posted by stephane on Wed Jan 23 16:41:20 2008                            Stefan Ritt wrote:                                                                            Re: inline button for upload image, posted by Stefan Ritt on Wed Jan 23 17:05:32 2008                            stephane wrote:                                            The problem with the toolbar when creating / edting entry in html mode still exist. I try in french, it                      Re: inline button for upload image, posted by stephane on Wed Jan 23 17:21:15 2008                            Stefan Ritt wrote:                                                            80 column Message width., posted by Carl Shirey on Mon Jan 21 15:32:06 2008  That is the the problem the text does not resize with the window or sending to the printer.       Re: 80 column Message width., posted by Stefan Ritt on Mon Jan 21 15:33:22 2008                            Carl Shirey wrote:                                            That is the the problem the text does not resize with the window or sending to the printer.   80 column Message width., posted by Carl Shirey on Mon Jan 21 15:03:48 2008    First thing we have been using the Elog for 2 yr for a shift carryover and it has works out great. Now for the problem I have. I heave the message width set to 80.  It works for plain Encoding       Re: 80 column Message width., posted by Stefan Ritt on Mon Jan 21 15:08:19 2008                            Carl Shirey wrote:                                                Audit Trail?, posted by Javier A. Ortiz on Fri Jan 18 13:57:31 2008  First thanks for the great software! My only question would be how to implement audit trail feature. I know you can control who edits and that's great but in regulated environments like mine there's a requirement that the original record, the one edited, is not deleted or overwritten. If not possible right now the only thing I could think of is a mechanism, maybe possible thru configuration, that when the record is edited it is copied to an audit trail       Re: Audit Trail?, posted by Stefan Ritt on Fri Jan 18 14:20:29 2008                            Javier A. Ortiz wrote:                                            First thanks for the great software! My only question would be how to implement audit trail   Configuration of HTML editor, posted by Kristján Jónsson on Thu Jan 10 18:30:26 2008  Do I have to do any extra configuration in elog to enable the FCKeditor. What I get with V2.7.0-1954 is that the main message entry field looks and behaves identically whether I set the encoding to HTML or plain (except the width and height of the field changes).       Re: Configuration of HTML editor, posted by Stefan Ritt on Fri Jan 11 08:08:51 2008                            Kristján Jónsson wrote:                                            Do I have to do any extra configuration in elog to enable the FCKeditor.          Re: Configuration of HTML editor, posted by Kristján Jónsson on Fri Jan 11 14:33:58 2008                              Stefan Ritt wrote:                                  Unknown toolbar item 'ShowBlocks', posted by Uwe on Wed Jan 9 21:12:20 2008  Hello, I just made an update from version V2.7.0-1964 to V2.7.0-1985 and I am receiving now the error message Unknown toolbar item 'ShowBlocks' whenever creating or editing an entry.  When clicking onto Ok, everything seems to work fine. Can you help please?       Re: Unknown toolbar item 'ShowBlocks', posted by Stefan Ritt on Thu Jan 10 08:27:53 2008                            Uwe wrote:                                            Hello,          Re: Unknown toolbar item 'ShowBlocks', posted by Uwe on Thu Jan 10 15:32:40 2008                            Stefan Ritt wrote:                                                                      Re: Unknown toolbar item 'ShowBlocks', posted by Stefan Ritt on Thu Jan 10 16:31:22 2008                            Uwe wrote:                                                            "Default encoding" default is not as documented , posted by Kristján Jónsson on Thu Jan 10 15:24:53 2008  Hi, "Default encoding" appears to have the default value of 2 (HTML) instead of 0 (ELCode) as documented in http://midas.psi.ch/elog/config.html       Re: "Default encoding" default is not as documented , posted by Stefan Ritt on Thu Jan 10 15:30:35 2008  [quote]"Default encoding" appears to have the default value of 2 (HTML) instead of 0 (ELCode) as documented in http://midas.psi.ch/elog/config.html   ELOG V2.7.0-1954 : elog.c line 8952   Summary view - Umlauts, posted by Uwe on Wed Nov 28 19:53:05 2007  Hello, when using the summary view, the text field displays umlauts as HTML-charachters, for e. g. diesbez&uuml;glich.  Is there a chance that also this view displays umlauts as ä, ü, ö?       Re: Summary view - Umlauts, posted by Stefan Ritt on Thu Nov 29 15:04:49 2007                            Uwe wrote:                                            Hello,          Re: Summary view - Umlauts, posted by Uwe on Thu Nov 29 18:58:32 2007                            Stefan Ritt wrote:                                                                      Re: Summary view - Umlauts, posted by Uwe on Thu Nov 29 19:13:02 2007                            Uwe wrote:                                                                         Re: Summary view - Umlauts, posted by Stefan Ritt on Thu Nov 29 19:25:50 2007                            Uwe wrote:                                            Just another thing I would like to admit. We are often using the summary view. Sometimes the summary view shows                   Re: Summary view - Umlauts, posted by Uwe on Thu Nov 29 19:38:03 2007                            Stefan Ritt wrote:                                                            Completed Swedish translation, posted by Kenneth Andersson on Wed Jan 9 10:43:42 2008  Hi! I have completed the Swedish translation and wonder how I can deliver it (if it´s still needed)?         Re: Completed Swedish translation, posted by Stefan Ritt on Wed Jan 9 11:00:21 2008                            Kenneth Andersson wrote:                                            I have completed the Swedish translation and wonder how I can deliver it (if it´s still   Re: Summary view - Umlauts, posted by Kenneth Andersson on Tue Jan 8 22:30:45 2008                            Uwe wrote:                                                            Moving a logbook from one installation to another, posted by Val Schmidt on Mon Dec 17 02:17:20 2007  I've attempted to move a logbook from an old elog installation to a new one on another system. The version of elog is the same (2.6.1) in both. Both systems have the same name and the logbooks are and installation are going in the same place. So all paths are identical. Also, for the new installation, I've simply recompiled the same sources used to install the original one. The only       Re: Moving a logbook from one installation to another, posted by Stefan Ritt on Mon Dec 17 08:13:22 2007                            Val Schmidt wrote:                                                         I've attempted to move a logbook          Re: Moving a logbook from one installation to another, posted by Val Schmidt on Mon Dec 17 19:18:13 2007      Stefan, I'm still stumped. I'm sorry for the hassle.              Re: Moving a logbook from one installation to another, posted by Stefan Ritt on Tue Dec 18 09:41:16 2007  First of all, you should also describe what has been improved. While for you it is important what is not working, for me it is also important what is working, to get more information if such a problem should occur again. So is your demo entry still there? Is the numbering still starting from 1 after you removed the demo entry?   ELog Friendly Reporting Tools, posted by Matt on Wed Dec 12 16:05:00 2007  We have used ELog for some time now (within the IT industry) for several things (on-call tracking, after-hours work, knowledge base and a few other uses in development).  Now that we have a good base of data, we would like to do some trending analysis.  We have used Excel in the past for this, but it is rather time consuming.  Does anyone have recommendations for tools (hopefully open source) they have used?  I know nearly anything   Print Function, posted by Adam Blandford on Wed Dec 5 13:10:52 2007  While it is possible to print a logbook using the standard web browser print command in the Full or Summary view, a dedicated print function allowing the user to print out a hardcopy of a particular logbook would be very helpful. Cheers       Re: Print Function, posted by Stefan Ritt on Wed Dec 5 21:33:48 2007                            Adam Blandford wrote:                                            While it is possible to print a logbook using the standard web browser print command in the Full or Summary   Icon comment, posted by Uwe on Thu Nov 29 21:40:29 2007  Hello, one idea for improvement. When using the option 'Icon comment' this comment is shown when creating a new entry and moving with he mouse over the icon but it is not displayed in full or summary view. In full or summary view the filename is shown. Not really important, but perhaps       Re: Icon comment, posted by Stefan Ritt on Mon Dec 3 09:05:16 2007                            Uwe wrote:                                            one idea for improvement. When using the option 'Icon comment' this comment is shown when creating          Re: Icon comment, posted by Uwe on Mon Dec 3 11:25:54 2007                            Stefan Ritt wrote:                                                            Display Picture in ELOG Welcome Page, posted by Adam Blandford on Fri Nov 30 08:57:54 2007    Hi I want to display an image on the title page and have put the following code into the elogd.cfg:       Re: Display Picture in ELOG Welcome Page, posted by Gregory M. Caughey on Fri Nov 30 10:36:21 2007                            Adam Blandford wrote:                                                    Re: Display Picture in ELOG Welcome Page, posted by Stefan Ritt on Fri Nov 30 11:34:42 2007                            Adam Blandford wrote:                                             Hi   quick filter, posted by Willem Koster on Wed Sep 5 15:05:52 2007  Greetings, Last night we updated to 2.6.5 and now the <ENTER>-key on the "quick filter" searches won't work anymore in        Re: quick filter, posted by Willem Koster on Wed Sep 5 16:35:29 2007  > Greetings, >  > Last night we updated to 2.6.5 and now the <ENTER>-key on the "quick filter" searches won't work anymore in           Re: quick filter, posted by Stefan Ritt on Thu Sep 6 08:50:53 2007  > > Greetings, > >  > > Last night we updated to 2.6.5 and now the <ENTER>-key on the "quick filter" searches won't work anymore in              Re: quick filter, posted by Uwe on Wed Nov 28 23:35:36 2007  > > > Greetings, > > >  > > > Last night we updated to 2.6.5 and now the <ENTER>-key on the "quick filter" searches won't work anymore in                 Re: quick filter, posted by Stefan Ritt on Thu Nov 29 12:22:44 2007  > I installed the latest version (2.7) of ELOG and having the problem that the quick filter only works when hitting the  > enter-key when there is only one free text field (subtext). Whene having two or more free text field you have to use  > the tab-key or click onto the elog icon. We are using Internet Explorer, not tested on Mozilla right now.                   Re: quick filter, posted by Uwe on Thu Nov 29 18:59:59 2007  > > I installed the latest version (2.7) of ELOG and having the problem that the quick filter only works when hitting the  > > enter-key when there is only one free text field (subtext). Whene having two or more free text field you have to use  > > the tab-key or click onto the elog icon. We are using Internet Explorer, not tested on Mozilla right now.   large attachment seems to hang elogd?, posted by Haitao Yu on Tue Mar 7 21:41:28 2006  Hello, I am trying to attach somewhat large file (4-15MB files tested) with my messages but it seems to hang the elogd server for a really long time (30-100minutes).       Re: large attachment seems to hang elogd?, posted by Konrad Klimaszewski on Thu Oct 25 09:43:52 2007  Hello, I'm observing the same behavior with ELOG V2.6.5-1844.       Re: large attachment seems to hang elogd?, posted by Jacky Li on Wed Oct 31 22:33:49 2007  Hi, I am having the same problem with 2.6.4.1 and the latest version.  It just hangs and taking a long time to upload multiple of 1.5 to 2 MB attachments...or          Re: large attachment seems to hang elogd?, posted by Jacky Li on Wed Oct 31 22:39:54 2007  Hi, I did more testing..if I suppress email notification, it is fast.  There is something wrong there.             Re: large attachment seems to hang elogd?, posted by Jacky Li on Wed Oct 31 22:44:06 2007  Ok, I noticed that the email notification got two copies of the attached files to elog post.  It looks like the cause is                 Re: large attachment seems to hang elogd?, posted by Konrad Klimaszewski on Mon Nov 5 14:00:56 2007  Hi, [quote="Jacky Li"]Ok,                   Re: large attachment seems to hang elogd?, posted by Stefan Ritt on Mon Nov 5 14:06:41 2007  [quote="Konrad Klimaszewski"]Until there is some fix in the way elog comunicates with mailer (if it is possible that is) could we have an option to suppress sending attachments in email notification?[/quote]                      Re: large attachment seems to hang elogd?, posted by Konrad Klimaszewski on Mon Nov 5 14:15:55 2007  [quote="Stefan Ritt"][quote="Konrad Klimaszewski"]Until there is some fix in the way elog comunicates with mailer (if it is possible that is) could we have an option to suppress sending attachments in email notification?[/quote]                         Re: large attachment seems to hang elogd?, posted by Stefan Ritt on Mon Nov 5 14:20:27 2007  [quote="Konrad Klimaszewski"]Great :-). I missed this one while digging through documentation. Maybe you could consider setting as default: [CODE]Email format = 111[/CODE][/quote]                            Re: large attachment seems to hang elogd?, posted by Konrad Klimaszewski on Mon Nov 5 14:34:31 2007  [quote="Stefan Ritt"][quote="Konrad Klimaszewski"]Great :-). I missed this one while digging through documentation. Maybe you could consider setting as default: [CODE]Email format = 111[/CODE][/quote]                               Re: large attachment seems to hang elogd?, posted by Stefan Ritt on Mon Nov 5 15:05:33 2007  [quote="Konrad Klimaszewski"]I don't know put it in the FAQ or something (under: "Why my posts with large attachments are submitted so slowly" ;)).[/quote] http://midas.psi.ch/elog/faq.html#18                                  Re: large attachment seems to hang elogd?, posted by Jacky Li on Tue Nov 20 22:27:03 2007  Hi, I put in the option:                                     Re: large attachment seems to hang elogd?, posted by Stefan Ritt on Thu Nov 22 14:16:51 2007  [quote="Jacky Li"]I put in the option: Email Format = 111   Quick Filter including Subtext applied overzealously?, posted by Richard Stamper on Mon Nov 12 15:58:57 2007  When there are two or more Quick Filters available, and one of them is on the Subtext attribute, once one of the other filters has its value changed the null text for the Subtext selection criterion (namely, "-- Text  --") is used as a genuine selection criterion, thus typically preventing any entries from matching.        Re: Quick Filter including Subtext applied overzealously?, posted by Stefan Ritt on Tue Nov 13 11:04:58 2007                            Richard Stamper wrote:                                            When there are two or more Quick Filters available, and one of them is on the Subtext attribute, once one          Re: Quick Filter including Subtext applied overzealously?, posted by Richard Stamper on Wed Nov 21 14:21:08 2007                            Stefan Ritt wrote:                                                            Quick filter - Subtext, posted by An Thai on Mon Nov 19 14:11:33 2007  The default subtext "-- Text --" for quick filter is included when another attribute is selected. So that the searched category always shows 0 entrie I cannot find this problem on your demo forum, but it is happening on my server.       Re: Quick filter - Subtext, posted by Stefan Ritt on Mon Nov 19 14:25:48 2007                            An Thai wrote:                                            The default subtext "-- Text --" for   New ELOG version with HTML Editor, posted by Stefan Ritt on Fri Oct 26 14:00:48 2007  I'm pleased to announce the release of ELOG version 2.7.0 which contains the HTML editor FCKeditor. This allows the formatting of ELOG entries just as one is used from a word processor. I tried to make all functionality working as one is used from the ELCode system (like replies quote the original text in a yellow text box), but I'm not sure if I covered everything. So if you experience problems with the new editor,       Re: New ELOG version with HTML Editor, posted by An Thai on Tue Nov 13 17:59:35 2007  Congratulation Stefan and Co.! I think Elog is the first Weblog which supports this feature. The new integrated HTML WYSIWYG editor is great. Now, my colleagues who are in finance department and don't have good IT-skill will be very happy   Email notification: "Use Email From = " always set to admin, posted by Alan Stone on Thu Oct 25 23:36:28 2007  My current syntax is:       Re: Email notification: "Use Email From = " always set to admin, posted by Stefan Ritt on Fri Oct 26 11:44:36 2007  [quote="Alan Stone"] My current syntax is:   Email Notification: Clarification on Attribute - can value be a string?, posted by Alan Stone on Thu Oct 25 23:55:28 2007  I encountered a rather insidious feature which had me scratching trying quite a number of things over the past couple of weeks until I compared what two        Re: Email Notification: Clarification on Attribute - can value be a string?, posted by Stefan Ritt on Fri Oct 26 11:18:59 2007  If you read http://midas.psi.ch/elog/config.html#email   Date attribute in Quick filter, posted by Peter Rienstra on Thu Oct 25 12:04:02 2007  Stefan, I downloaded the latest source (ELOG V2.6.5-1946) to solve another problem. But now I get:       Re: Date attribute in Quick filter, posted by Stefan Ritt on Thu Oct 25 20:15:46 2007  [quote="Peter Rienstra"]I downloaded the latest source (ELOG V2.6.5-1946) to solve another problem. But now I get: Error: "Attribute "Date" for quick filter not found", see attachment.   extendable options, posted by Arno Teunisse on Sat Oct 13 15:32:23 2007  Hello running ELOG V2.6.5-1890 Snap of the config file :        Re: extendable options, posted by Stefan Ritt on Mon Oct 22 16:33:50 2007  [quote="Arno Teunisse"]When I click the "Add Version" button Elog end's with a "Internal error, no  valid header!" after hitting the submit button. ( See attachments )[/quote]       Re: extendable options, posted by Stefan Ritt on Mon Oct 22 21:22:28 2007  [quote="Arno Teunisse"] ; attributes Attributes = OS, Version, Klant , Category, Subject   opening a local html file, posted by Arno Teunisse on Sun Oct 21 22:35:19 2007  Hello  I've managed to create several logbooks that are an index of a (slow) shared        Re: opening a local html file, posted by Stefan Ritt on Mon Oct 22 17:38:32 2007  Have a look at  http://kb.mozillazine.org/Links_to_local_pages_don't_work   Quick Filter and boolean option question, posted by Arno Teunisse on Fri Oct 19 22:59:31 2007  ; BUG : When "Contract" is at the second position in the "Attributes". ; We See in the "Quick Filter" a pulldown showing "Serial Number" with only "0" or "1" ,  ; this is NOT what i want or is expected !!!       Re: Quick Filter and boolean option question, posted by Arno Teunisse on Sun Oct 21 00:17:34 2007  [quote="Arno Teunisse"]; BUG : When "Contract" is at the second position in the "Attributes". ; We See in the "Quick Filter" a pulldown showing "Serienummer" with only "0" or "1" ,  ; this is NOT what i want or is expected !!!          Re: Quick Filter and boolean option question, posted by Stefan Ritt on Sun Oct 21 12:21:09 2007  [quote="Arno Teunisse"]Because I did not get an answer i think i must ask it in an other way[/quote] The reason you did not get an answer was not that you asked the wrong way, but simply that I'm pretty busy these days. So just be patient, I won't forget             Re: Quick Filter and boolean option question, posted by Arno Teunisse on Sun Oct 21 22:51:07 2007  Thanks Stefan , i'll wait. Sorry.       Re: Quick Filter and boolean option question, posted by Stefan Ritt on Mon Oct 22 17:27:45 2007  [quote="Arno Teunisse"]When "Contract" is at the second position in the "Attributes". We See in the "Quick Filter" a pulldown showing "Serial Number" with only "0" or "1" ,  this is NOT what i want or is expected !!![/quote]   Add date and time stamp to file upload, posted by Fergus Lynch on Thu Oct 4 12:03:30 2007  Hi, Been using ELOG for a couple of years now and I am very impressed with its functionality.       Re: Add date and time stamp to file upload, posted by Stefan Ritt on Thu Oct 4 17:19:56 2007  [quote="Fergus Lynch"]I would like to request a new feature - add date and time stamp to file upload.  We use ELOG (amongst other things!) as a change log and this would really allow allow more accurate records to be kept.  For instance we upload router config files (to record changes)and having the exact upload date would be a big enhancement, especially when there are a lot of attachments.[/quote]          Re: Add date and time stamp to file upload, posted by Fergus Lynch on Tue Oct 9 11:48:17 2007  [quote="Stefan Ritt"][quote="Fergus Lynch"]I would like to request a new feature - add date and time stamp to file upload.  We use ELOG (amongst other things!) as a change log and this would really allow allow more accurate records to be kept.  For instance we upload router config files (to record changes)and having the exact upload date would be a big enhancement, especially when there are a lot of attachments.[/quote]             Re: Add date and time stamp to file upload, posted by Stefan Ritt on Fri Oct 19 21:44:00 2007  [quote="Fergus Lynch"]Hi, I think this would be great new functionality, so I would propose the date/time stamp for an uploaded file was placed just after the file size text that appears at the far right hand side of all attachments.[/quote]   default css style , posted by Arno Teunisse on Thu Oct 18 23:18:03 2007  The default tiny.css has a bug in it. It's calling a class that does not exists. The class name is : list1h and list2h. So I added :       Re: default css style , posted by Stefan Ritt on Fri Oct 19 09:08:06 2007  [quote="Arno Teunisse"]The default tiny.css has a bug in it. It's calling a class that does not exists. The class name is : list1h and list2h.[/quote]   how to use the find calendar, posted by Arno Teunisse on Sat Oct 6 16:47:44 2007  Hello  In the find page you use a calendar popup from which the user can click on a date and the date boxes are filled in with the correct date. Can I use that calendar also? If so, can you show me an example of it's usage.         Re: how to use the find calendar, posted by Arno Teunisse on Sat Oct 6 17:15:59 2007  [quote="Arno Teunisse"]Hello  In the find page you use a calendar popup from which the user can click on a date and the date boxes are filled in with the correct date. Can I use that calendar also? If so, can you show me an example of it's usage.     testing for the limit of the elog database , posted by Arno Teunisse on Sat Oct 6 15:39:12 2007  Hello To test elog i created a very large databasefile ( 071006a.log = 39MB ) via an import.       Re: testing for the limit of the elog database , posted by Stefan Ritt on Sat Oct 6 15:44:51 2007  [quote="Arno Teunisse"]So there are only 2 user defined fields in the database.  Everything works ......... but  terrible slow : is there a rule of thumb for the size of the database ? [/quote]          Re: testing for the limit of the elog database , posted by Arno Teunisse on Sat Oct 6 15:56:13 2007  [quote="Stefan Ritt"][quote="Arno Teunisse"]So there are only 2 user defined fields in the database.  Everything works ......... but  terrible slow : is there a rule of thumb for the size of the database ? [/quote]             Re: testing for the limit of the elog database , posted by Stefan Ritt on Sat Oct 6 16:11:50 2007  [quote="Arno Teunisse"]By the way : my email address has changed : how do I change that ??[/quote] Click on 'Config'.   , posted by on Sat Oct 6 14:05:01 2007  I ended with 125384 entries like the one above.   Post appearing twice, posted by Dan Chitwood on Fri Sep 23 19:23:26 2005  We are having trouble on our logbook with posts appearing twice.  Both posts contain the same ID number, time, etc.  This most often occurs when the e-log entry is being written for an extended period of time (ie. more than 30 minutes), but I don't know if that is the root cause of the problem.  It may also be related to posts that are edited after an initial posting.  Could this be due to an improper setting in our config file?       Re: Post appearing twice, posted by Stefan Ritt on Wed Oct 5 13:22:08 2005  [quote="Dan Chitwood"]We are having trouble on our logbook with posts appearing twice.  Both posts contain the same ID number, time, etc.  This most often occurs when the e-log entry is being written for an extended period of time (ie. more than 30 minutes), but I don't know if that is the root cause of the problem.  It may also be related to posts that are edited after an initial posting.  Could this be due to an improper setting in our config file?[/quote]          Re: Post appearing twice, posted by Alan Grant on Mon Jun 4 22:30:44 2007  [quote="Stefan Ritt"][quote="Dan Chitwood"]We are having trouble on our logbook with posts appearing twice.  Both posts contain the same ID number, time, etc.  This most often occurs when the e-log entry is being written for an extended period of time (ie. more than 30 minutes), but I don't know if that is the root cause of the problem.  It may also be related to posts that are edited after an initial posting.  Could this be due to an improper setting             Re: Post appearing twice, posted by Stefan Ritt on Fri Jun 8 10:44:14 2007  [quote="Alan Grant"]I was having a very similar problem. After clicking Submit, I was getting dialog box "Submit modified Elog entry?" (with Submit or Cancel options) even though it was a new entry. Whenever I clicked Submit, it added two identical lines (except for ID), but when I clicked Cancel, it added only one entry. This happened in both v2.6.3 and v2.6.5.[/quote]                Re: Post appearing twice, posted by deletoille on Tue Jun 12 11:07:39 2007  [quote="Stefan Ritt"][quote="Alan Grant"]I was having a very similar problem. After clicking Submit, I was getting dialog box "Submit modified Elog entry?" (with Submit or Cancel options) even though it was a new entry. Whenever I clicked Submit, it added two identical lines (except for ID), but when I clicked Cancel, it added only one entry. This happened in both v2.6.3 and v2.6.5.[/quote]       Re: Post appearing twice, posted by Stefan Ritt on Tue Jun 12 17:13:28 2007  I finally found and fixed the problem with the help of Alan Grant. It happens when three things are used together: [LIST=1] [*] Locking (via [B]use lock = 1[/B])          Re: Post appearing twice, posted by Bertram Metz on Thu Sep 27 15:18:10 2007  I've observed the same behavior with attributes containing a dash. Would it be possible to allow '-' in attributes? Bertram             Re: Post appearing twice, posted by Stefan Ritt on Fri Sep 28 17:52:37 2007  [quote="Bertram Metz"]I've observed the same behavior with attributes containing a dash. Would it be possible to allow '-' in attributes?[/quote] Yes. Fixed in Revision 1930.   Too many logbooks during user registration, posted by Steve Jones on Mon Aug 6 17:43:52 2007  Stefan, we require registration with elog.  We have quite a number of logbooks and when someone requests a login account AND elects to register with all of the logbooks, the resulting URL is apparently too long for browsers to handle when the admins click on the link embedded in the email notification.  For example, FireFox (latest ver) appears to truncate the URL *after* submission (the correct URL is there before submission).       Re: Too many logbooks during user registration, posted by Stefan Ritt on Tue Aug 7 18:39:37 2007  [quote="Steve Jones"]Stefan, we require registration with elog.  We have quite a number of logbooks and when someone requests a login account AND elects to register with all of the logbooks, the resulting URL is apparently too long for browsers to handle when the admins click on the link embedded in the email notification.  For example, FireFox (latest ver) appears to truncate the URL *after* submission (the correct URL is there before submission).          Re: Too many logbooks during user registration, posted by Steve Jones on Tue Sep 11 15:30:11 2007  [quote="Stefan Ritt"][quote="Steve Jones"]Stefan, we require registration with elog.  We have quite a number of logbooks and when someone requests a login account AND elects to register with all of the logbooks, the resulting URL is apparently too long for browsers to handle when the admins click on the link embedded in the email notification.  For example, FireFox (latest ver) appears to truncate the URL *after* submission (the correct URL is there before             Re: Too many logbooks during user registration, posted by Stefan Ritt on Tue Sep 11 21:25:11 2007  [quote="Steve Jones"]So the list is shown to the one requesting the registration?  Would it be possible to have an option that, when selected, simply did not list any logbooks?  I can see a customer becoming confused if they did not see their logbook listed.  Just turn off the selection completely.  Otherwise, this will work but I fear will generate more questions as in "Why isn't logbook <blah> listed?"[/quote]   ELCode how to with URL, posted by toumbi on Mon Aug 27 17:27:41 2007  Hello there !! I wonder if it's possible to write an url like this[URL=?CR=CR00000429]CR00000429[/URL]        Re: ELCode how to with URL, posted by Stefan Ritt on Fri Sep 7 22:56:12 2007  > Hello there !! >  > I wonder if it's possible to write an url like this[URL=?CR=CR00000429]CR00000429[/URL]           Re: ELCode how to with URL, posted by toumbi on Tue Sep 11 11:36:04 2007  Thank you a lot !!   Synchronization Problems, posted by Nicole Ackerman on Wed Sep 5 01:09:00 2007  I'm currently running elog 2.6.5 on my (feisty ubuntu) laptop and desktop.  I set up mirroring between the two which usually works, but occasionally I get an error (when sending from laptop to desktop) :       Re: Synchronization Problems, posted by Stefan Ritt on Fri Sep 7 22:31:10 2007  [quote="Nicole Ackerman"]I'm currently running elog 2.6.5 on my (feisty ubuntu) laptop and desktop.  I set up mirroring between the two which usually works, but occasionally I get an error (when sending from laptop to desktop) :   Boolean, posted by Grant Jeffcote on Fri Aug 3 15:49:05 2007  Stefan, I've noticed in the latest release when using the 'Find' page that any boolean expression (tick box) is now shown as '0,1 or unspecified'. Is this intentional?       Re: Boolean, posted by Stefan Ritt on Fri Aug 3 16:00:42 2007  [quote="Grant Jeffcote"]I've noticed in the latest release when using the 'Find' page that any boolean expression (tick box) is now shown as '0,1 or unspecified'. Is this intentional? My colleagues are finding it hard to get their heads around what to choose and preferred the old 'Tick Box' option. Have there been changes to the configuration arguments used for Boolean that I've missed?[/quote]          Re: Boolean, posted by Grant Jeffcote on Fri Aug 3 17:03:46 2007  [quote="Stefan Ritt"][quote="Grant Jeffcote"]I've noticed in the latest release when using the 'Find' page that any boolean expression (tick box) is now shown as '0,1 or unspecified'. Is this intentional? My colleagues are finding it hard to get their heads around what to choose and preferred the old 'Tick Box' option. Have there been changes to the configuration arguments used for Boolean that I've missed?[/quote]             Re: Boolean, posted by Stefan Ritt on Fri Aug 3 17:05:56 2007  [quote="Grant Jeffcote"]What are the chances of having a choice of the four options (as mentioned in your list) somehow so that when boolean-x is used (for example) in the configuration file the applicable option text is shown in the 'Find' page?[/quote]   WYSIWYG (What you see is what you get), posted by An Thai on Wed Apr 25 10:29:40 2007  Dear all, I use the freemail from provider Web.de and find that its web-email editor ist very nice.       Re: WYSIWYG (What you see is what you get), posted by Stefan Ritt on Wed Apr 25 10:44:29 2007  [quote="An Thai"]Dear all, I use the freemail from provider Web.de and find that its web-email editor ist very nice.          Re: WYSIWYG (What you see is what you get), posted by Steve Jones on Wed Apr 25 19:39:57 2007  [quote="Stefan Ritt"][quote="An Thai"]Dear all, I use the freemail from provider Web.de and find that its web-email editor ist very nice.          Re: WYSIWYG (What you see is what you get), posted by An Thai on Fri Jul 27 16:00:07 2007  Hi Stefan, I have just found an open source for WYSIWYG text editor named FCKeditor at [URL=http://www.fckeditor.net/]http://www.fckeditor.net/[/URL]. It looks great.             Re: WYSIWYG (What you see is what you get), posted by Stefan Ritt on Thu Aug 2 12:24:26 2007  [quote="An Thai"]I have just found an open source for WYSIWYG text editor named FCKeditor at [URL=http://www.fckeditor.net/]http://www.fckeditor.net/[/URL]. It looks great. The download Zip-file for this tool is only 1 MB.[/quote]   CVS import + french = impossible , posted by toumbi on Fri Jul 20 16:06:50 2007  Hi , I found a bug , when I want to import a cvs file and if i had set Language=french into global , I m not allowed. [CODE]Erreur : commande "CSV Import" non autorisée        Re: CVS import + french = impossible , posted by Stefan Ritt on Tue Jul 24 08:30:02 2007  [quote="toumbi"]Hi , I found a bug , when I want to import a cvs file and if i had set Language=french into global , I m not allowed. [CODE]Erreur : commande "CSV Import" non autorisée    How to change elog directories in windows, posted by toumbi on Thu Jun 28 15:20:06 2007  Hi , I need an example for windows directories syntax. I would like to start elog in windows xp from a server directories "\\myserver\elog\" for example and/or "G:\elog\"  I want my elogd.cfg be on this server and not on my local hard drive.       Re: How to change elog directories in windows, posted by Stefan Ritt on Thu Jun 28 15:24:31 2007  [quote="toumbi"]Hi , I need an example for windows directories syntax. I would like to start elog in windows xp from a server directories "\\myserver\elog\" for example and/or "G:\elog\"  I want my elogd.cfg be on this server and not on my local hard drive.          Re: How to change elog directories in windows, posted by toumbi on Thu Jun 28 17:05:56 2007  [quote="Stefan Ritt"][quote="toumbi"]Hi , I need an example for windows directories syntax. I would like to start elog in windows xp from a server directories "\\myserver\elog\" for example and/or "G:\elog\"  I want my elogd.cfg be on this server and not on my local hard drive.             Re: How to change elog directories in windows, posted by Stefan Ritt on Thu Jun 28 17:08:32 2007  [quote="toumbi"]Hi stephan , I remove elog and setup it again wiht the nis installer, and enter Z:\ELOG\ which is a mapping drive of my server directorie. but it dont work. i have an error code 3 when i register the services with the shortcut "Register ELOG server service" .[/quote]                Re: How to change elog directories in windows, posted by toumbi on Thu Jun 28 17:20:18 2007  [quote="Stefan Ritt"][quote="toumbi"]Hi stephan , I remove elog and setup it again wiht the nis installer, and enter Z:\ELOG\ which is a mapping drive of my server directorie. but it dont work. i have an error code 3 when i register the services with the shortcut "Register ELOG server service" .[/quote]                   Re: How to change elog directories in windows, posted by Stefan Ritt on Thu Jun 28 17:23:24 2007  [quote="toumbi"]Why code 3 ?[/quote] No idea, this is an error coming from Windows. Try to start the service manually via the Service Manager, maybe you get some more error there. Or start                      Re: How to change elog directories in windows, posted by toumbi on Thu Jun 28 17:38:39 2007  [quote="Stefan Ritt"][quote="toumbi"]Why code 3 ?[/quote] No idea, this is an error coming from Windows. Try to start the service manually via the Service Manager, maybe you get some more error there. Or start                         Re: How to change elog directories in windows, posted by Stefan Ritt on Thu Jun 28 19:25:48 2007  [quote="toumbi"]Maybe The service doesn't have access right , ( i see it is Log on with Local System). [/quote] In that case it might help to run elog under your personal account.                            Re: How to change elog directories in windows, posted by toumbi on Fri Jul 20 16:13:07 2007  [quote="Stefan Ritt"][quote="toumbi"]Maybe The service doesn't have access right , ( i see it is Log on with Local System). [/quote] In that case it might help to run elog under your personal account.[/quote]   Show attributes , posted by deletoille on Wed Jul 4 11:51:22 2007  with the last version, Show attributes commands seem to not working any more. could you chech this? thanks in advance       Re: Show attributes , posted by Stefan Ritt on Wed Jul 4 16:39:10 2007  [quote="deletoille"]with the last version, Show attributes commands seem to not working any more. could you chech this?[/quote] I checked and they still work. But maybe you got confused between [B]Show Attributes[/B] (for the single page view), [B]Show Attributes Edit[/B] (for the          Re: Show attributes , posted by deletoille on Tue Jul 17 11:17:49 2007  [quote="Stefan Ritt"][quote="deletoille"]with the last version, Show attributes commands seem to not working any more. could you chech this?[/quote] I checked and they still work. But maybe you got confused between [B]Show Attributes[/B] (for the single page view), [B]Show Attributes Edit[/B] (for the             Re: Show attributes , posted by Stefan Ritt on Tue Jul 17 11:30:16 2007  [quote="deletoille"]here a small example with the function: "show attributes". that functions with release 1748 but not with the last release 1886. All the attributes appear at the same time whereas I would wish only the 2 first.[/quote]                Re: Show attributes , posted by deletoille on Tue Jul 17 11:45:02 2007  [quote="Stefan Ritt"][quote="deletoille"]here a small example with the function: "show attributes". that functions with release 1748 but not with the last release 1886. All the attributes appear at the same time whereas I would wish only the 2 first.[/quote]                   Re: Show attributes , posted by Stefan Ritt on Tue Jul 17 11:50:44 2007  [quote="deletoille"]I'd try again and that does not works. does the problem come from the windows version?[/quote] Certainly not. Double check that you have the current elog version (check the [B]ELOG V2.6.5-1887[/B] at the bottom). If you are on windows, you can try                      Re: Show attributes , posted by deletoille on Tue Jul 17 13:24:58 2007  [quote="Stefan Ritt"][quote="deletoille"]I'd try again and that does not works. does the problem come from the windows version?[/quote] Certainly not. Double check that you have the current elog version (check the [B]ELOG V2.6.5-1887[/B] at the bottom). If you are on windows, you can try                         Re: Show attributes , posted by Stefan Ritt on Tue Jul 17 13:28:29 2007  Grrrr. I already told you in elog:2287 to use [B]Show Attributes Edit[/B] instead of [B]Show Attributes[/B]. So put following into your config file: [FONT=Courier New]show attributes [B]edit[/B] = auteur,Icone, Type Equipement[/FONT]                            Re: Show attributes , posted by deletoille on Tue Jul 17 14:05:50 2007  [quote="Stefan Ritt"]Grrrr. I already told you in elog:2287 to use [B]Show Attributes Edit[/B] instead of [B]Show Attributes[/B]. So put following into your config file:   is it possible to have unique attribute ?, posted by toumbi on Wed Jul 11 11:52:24 2007  Hi there  ! I have an attribute that have to be unique (but i need also to write it myself) , so i would like to be able to create it the first time, and if i try       Re: is it possible to have unique attribute ?, posted by Stefan Ritt on Thu Jul 12 18:36:05 2007  [quote="toumbi"]I have an attribute that have to be unique (but i need also to write it myself) , so i would like to be able to create it the first time, and if i try to create it again, i want not be able. Is there a way to do that ?[/quote]   Fixed Attribute fields blank?, posted by Grant Jeffcote on Sat Jun 30 04:58:32 2007  Hi Stefan, Not sure if this is my configuration only but in your latest compiled release V2.6.5-1873 when I do a reply or edit on an entry where I have specified       Re: Fixed Attribute fields blank?, posted by Stefan Ritt on Sat Jun 30 09:48:01 2007  [quote="Grant Jeffcote"]Not sure if this is my configuration only but in your latest compiled release V2.6.5-1873 when I do a reply or edit on an entry where I have specified Fixed Attributes Edit or Reply these fields now show blank on the entry page? They are still uneditable as a field of course and the text still shows on the list view display page but no text shows in these fields until re/submitted.[/quote]          Re: Fixed Attribute fields blank?, posted by Grant Jeffcote on Sat Jun 30 21:29:30 2007  [quote="Stefan Ritt"][quote="Grant Jeffcote"]Not sure if this is my configuration only but in your latest compiled release V2.6.5-1873 when I do a reply or edit on an entry where I have specified Fixed Attributes Edit or Reply these fields now show blank on the entry page? They are still uneditable as a field of course and the text still shows on the list view display page but no text shows in these fields until re/submitted.[/quote]   Error sending Email via "XXX.XXX.XXX.XXX", posted by JJ Sheppard on Wed Jun 27 22:01:56 2007  I read most of the posts and used the -v to see whats happening, all i get is this. It hangs at the "250 HELP" line for about 3 secs then moves on to what is displayed. From the posts it looks like there should be alot more info to see. Any idea on how to get it to display right?       Re: Error sending Email via "XXX.XXX.XXX.XXX", posted by Stefan Ritt on Thu Jun 28 17:12:11 2007  [quote="JJ Sheppard"]220 Welcome to the @Mail v4.4 SMTP Server ( Exim ) EHLO server.XXXX.net 250-MX1.SPIDERHOST.COM Hello server.XXXX.net [XXX.XXX.XX.XX]          Re: Error sending Email via "XXX.XXX.XXX.XXX", posted by JJ Sheppard on Fri Jun 29 16:14:16 2007  [quote="Stefan Ritt"][quote="JJ Sheppard"]220 Welcome to the @Mail v4.4 SMTP Server ( Exim ) EHLO server.XXXX.net 250-MX1.SPIDERHOST.COM Hello server.XXXX.net [XXX.XXX.XX.XX]             Re: Error sending Email via "XXX.XXX.XXX.XXX", posted by Stefan Ritt on Fri Jun 29 16:16:58 2007  [quote="JJ Sheppard"]This is what I get now, Is this the Auth Login problem you were speaking of? Email from elog@XXXXX.net to jsheppard@XXXXX.net, SMTP host XXX.XXX.XXX.XXX:                Re: Error sending Email via "XXX.XXX.XXX.XXX", posted by JJ Sheppard on Fri Jun 29 16:30:46 2007  [quote="Stefan Ritt"][quote="JJ Sheppard"]This is what I get now, Is this the Auth Login problem you were speaking of? Email from elog@XXXXX.net to jsheppard@XXXXX.net, SMTP host XXX.XXX.XXX.XXX:                   Re: Error sending Email via "XXX.XXX.XXX.XXX", posted by Stefan Ritt on Fri Jun 29 16:43:23 2007  [quote="JJ Sheppard"]Any thing else I can try?[/quote] Maybe [B]advservices[/B] instead of [B]advservices@XXXXX.XXX[/B] ? Just an idea.                      Re: Error sending Email via "XXX.XXX.XXX.XXX", posted by JJ Sheppard on Fri Jun 29 16:54:39 2007  [quote="Stefan Ritt"][quote="JJ Sheppard"]Any thing else I can try?[/quote] Maybe [B]advservices[/B] instead of [B]advservices@XXXXX.XXX[/B] ? Just an idea.[/quote]                         Re: Error sending Email via "XXX.XXX.XXX.XXX", posted by Stefan Ritt on Fri Jun 29 16:57:41 2007  [quote="JJ Sheppard"]The filed is locked but the name shows up on its own line above the "Fields marked with * are required"[/quote] I fixed that yesterday. Please upgrade to SVN revision 1873.                            Re: Error sending Email via "XXX.XXX.XXX.XXX", posted by JJ Sheppard on Fri Jun 29 17:59:54 2007  [quote="Stefan Ritt"] I fixed that yesterday. Please upgrade to SVN revision 1873.[/quote]                               Re: Error sending Email via "XXX.XXX.XXX.XXX", posted by Stefan Ritt on Fri Jun 29 19:29:56 2007  [quote="JJ Sheppard"][quote="Stefan Ritt"] I fixed that yesterday. Please upgrade to SVN revision 1873.[/quote]                                  Re: Error sending Email via "XXX.XXX.XXX.XXX", posted by JJ Sheppard on Fri Jun 29 20:34:38 2007  [quote="Stefan Ritt"] I'm also running out of ideas. You would have to use a network sniffer (like Ethereal) and compare the network traffic between Thunderbird/ELOG and the SMTP server.[/quote]   icons\elc_anchor.png is missing ? , posted by toumbi on Thu Jun 28 17:48:40 2007  the file icons\elc_anchor.png is missing I setup the windows version.       Re: icons\elc_anchor.png is missing ? , posted by Stefan Ritt on Thu Jun 28 19:36:06 2007  [quote="toumbi"]the file icons\elc_anchor.png is missing I setup the windows version.[/quote] It's contained in http://midas.psi.ch/elog/download/windows/elog265-2.exe   formating bug : css and Format command, posted by toumbi on Wed Jun 27 14:42:13 2007  Why Gain and G1,G2 .... G8 are on the same line ? When I create a new entry, attibute 'attribgainname' is not used.( i can see lime color only when i see logged  message.)       Re: formating bug : css and Format command, posted by Stefan Ritt on Wed Jun 27 15:06:24 2007  [quote="toumbi"]Why Gain and G1,G2 .... G8 are on the same line ?[/quote] Because you specified it! The first [B]"1"[/B] in your format forces the attributes to show up on the same line. Just read the manual.          Re: formating bug : css and Format command, posted by toumbi on Wed Jun 27 16:02:49 2007  [quote="Stefan Ritt"] Because you specified it! The first [B]"1"[/B] in your format forces the attributes to show up on the same line. Just read the manual. [/quote]             Re: formating bug : css and Format command, posted by Stefan Ritt on Wed Jun 27 16:15:04 2007  [quote="toumbi"]ok so if you say it is not a bug i can understand but in that case the format command work half in  the entry form. Is it possible to implement it for the next time?[/quote]                Re: formating bug : css and Format command, posted by toumbi on Wed Jun 27 19:51:39 2007  [quote="Stefan Ritt"][quote="toumbi"]ok so if you say it is not a bug i can understand but in that case the format command work half in  the entry form. Is it possible to implement it for the next time?[/quote]                   Re: formating bug : css and Format command, posted by Stefan Ritt on Thu Jun 28 17:18:21 2007  [quote="toumbi"]linkHeading_prompt  = 'Indiquez le niveau d'en-tête (1, 2 ou 3)';[/quote] I changed the code of elogd to surround the strings with "" such as   list of 500 files, posted by chris williams on Sun Jun 24 02:38:31 2007  How can I have my list accept over 500 entries?  I tried increasing the elogd.c (max_n_list)file as stated but the compiler gives me errors.  Please help       Re: list of 500 files, posted by Stefan Ritt on Mon Jun 25 08:50:38 2007  [quote="chris williams"]How can I have my list accept over 500 entries?  I tried increasing the elogd.c (max_n_list)file as stated but the compiler gives me errors.  Please help[/quote]          Re: list of 500 files, posted by chris williams on Mon Jun 25 18:14:44 2007  Thanks for the response.  I am trying to use it as a file database, to monitor the status of files(whether they have been removed, ammended etc), currently there are 90 files but I expect the size to grow.               Re: list of 500 files, posted by Stefan Ritt on Mon Jun 25 19:22:01 2007  [quote="chris williams"]Thanks for the response.  I am trying to use it as a file database, to monitor the status of files(whether they have been removed, ammended etc), currently there are 90 files but I expect the size to grow.  [/quote]                Re: list of 500 files, posted by chris williams on Tue Jun 26 01:56:05 2007  True, thanks.   sorting a drop down menu in elog, posted by chris williams on Sun Jun 24 00:12:15 2007  Hi, I was wondering, how can I insert new items into my drop down menu and have them appear in an alphabetical order? Is there some sort of code I can insert into the config file to do so? Thanks       Re: sorting a drop down menu in elog, posted by Stefan Ritt on Mon Jun 25 08:46:55 2007  [quote="chris williams"]Hi, I was wondering, how can I insert new items into my drop down menu and have them appear in an alphabetical order? Is there some sort of code I can insert into the config file to do so? Thanks[/quote]          Re: sorting a drop down menu in elog, posted by chris williams on Mon Jun 25 18:15:24 2007  ok...thanks much.   How long should it taken for new entry with attachments?, posted by An Thai on Tue Jun 19 23:21:52 2007  Hello, shortly I have a new issue of entry with attachments.       Re: How long should it taken for new entry with attachments?, posted by Stefan Ritt on Wed Jun 20 18:20:01 2007  [quote="An Thai"]I try to re-produce the problem and find out that elog service needs very long to serve an entry with attachments.  Normally it takes about 3 seconds after the button SUBMIT is clicked to open the confirm page (ca. 20 recipients).   Preset Date and Time, posted by David Egolf on Fri Jun 15 18:25:07 2007  Is there a way to have the preset date and time and add a set additional time?  I do Preventative maintenance and want to add a default 30 days or 90 days to the preset date and time in a datetime field.        Re: Preset Date and Time, posted by Stefan Ritt on Fri Jun 15 18:54:10 2007  [quote="David Egolf"]Is there a way to have the preset date and time and add a set additional time?  I do Preventative maintenance and want to add a default 30 days or 90 days to the preset date and time in a datetime field. [/quote]   how to supress checkboxes of all logbooks at registration?, posted by Mark Bergman on Thu May 31 23:33:28 2007  Is there a way to suppress the listing of all logbooks on the New User Registration page? We've got 100 logbooks (one for each server, cluster node, or major software package). The long list makes it difficult for users to find the bottom of the registration page, and no user needs to subscribe for automatic e-mail notification for every logbook.       Re: how to supress checkboxes of all logbooks at registration?, posted by Stefan Ritt on Fri Jun 1 08:43:23 2007  [quote="Mark Bergman"]Is there a way to suppress the listing of all logbooks on the New User Registration page? We've got 100 logbooks (one for each server, cluster node, or major software package). The long list makes it difficult for users to find the bottom of the registration page, and no user needs to subscribe for automatic e-mail notification for every logbook.   config settings to ensure replies to author, thread contributors, admin?, posted by Mark Bergman on Thu May 31 23:46:31 2007  I'm having some difficulty configuring elog to ensure that the original author of an entry, any contributors to the thread, and a desginated administrator get e-mail notification for any change to the thread.       Re: config settings to ensure replies to author, thread contributors, admin?, posted by Stefan Ritt on Fri Jun 1 08:40:13 2007  [quote="Mark Bergman"][CODE]Attributes = Author, Type, Category, Severity, Subject, Entry ID, Status, CC E-mail To Display Email recipients = 1 Email All = $CC E-mail To   checkbox, posted by deletoille on Tue Oct 31 14:45:05 2006  Hello, I found a small Bug when I create an entry. I activate a checkbox (attachement1) but when I upload a file, the activation disappears (attachement 2).  I have to activate again the checkbox.        Re: checkbox, posted by Steve Jones on Tue Oct 31 22:10:11 2006  [quote="deletoille"]Hello, I found a small Bug when I create an entry. I activate a checkbox (attachement1) but when I upload a file, the activation disappears (attachement 2).  I have to activate again the checkbox.           Re: checkbox, posted by deletoille on Thu Nov 2 08:41:34 2006  [quote="Steve Jones"][quote="deletoille"]Hello, I found a small Bug when I create an entry. I activate a checkbox (attachement1) but when I upload a file, the activation disappears (attachement 2).  I have to activate again the checkbox.              Re: checkbox, posted by Stefan Ritt on Wed Nov 8 07:59:01 2006  [quote="deletoille"]I found a small Bug when I create an entry. I activate a checkbox (attachement1) but when I upload a file, the activation disappears (attachement 2).  I have to activate again the checkbox.  Is it something I can do?[/quote]                Re: checkbox, posted by deletoille on Wed Nov 8 15:39:42 2006  [quote="Stefan Ritt"][quote="deletoille"]I found a small Bug when I create an entry. I activate a checkbox (attachement1) but when I upload a file, the activation disappears (attachement 2).  I have to activate again the checkbox.  Is it something I can do?[/quote]                   Re: checkbox, posted by deletoille on Mon May 28 04:53:48 2007  [quote="deletoille"][quote="Stefan Ritt"][quote="deletoille"]I found a small Bug when I create an entry. I activate a checkbox (attachement1) but when I upload a file, the activation disappears (attachement 2).  I have to activate again the checkbox.  Is it something I can do?[/quote]                      Re: checkbox, posted by Stefan Ritt on Wed May 30 22:32:03 2007  [quote="deletoille"]I wrote a small program for another group and I have always the same problem of activation box who disappears  when I upload a file. On the other hand, I noticed that the problem is only for the conditional attribute and not for the other. Here included the small program. an idea?[/quote]   Summary view: View only most recent entry for all values of a given attribute?, posted by Dennis Seitz on Thu May 17 02:12:52 2007  We are using Elog to track status of hardware assemblies. One attribute we've created is the serial number of an assembly. Other attributes are items like "location" and "status". We have set up these latter attributes with presets to make entry easy and keep entries consistent.       Re: Summary view: View only most recent entry for all values of a given attribute?, posted by Stefan Ritt on Thu May 17 14:02:39 2007  [quote="Dennis Seitz"]I would like to filter the summary view so it only shows me the most recent entry for every value in the serial number attribute. This would be very useful for quickly viewing the present status and location of every assembly, for example.[/quote]          Re: Summary view: View only most recent entry for all values of a given attribute?, posted by Dennis Seitz on Fri May 18 02:15:41 2007  [quote="Stefan Ritt"][quote="Dennis Seitz"]I would like to filter the summary view so it only shows me the most recent entry for every value in the serial number attribute. This would be very useful for quickly viewing the present status and location of every assembly, for example.[/quote]             Re: Summary view: View only most recent entry for all values of a given attribute?, posted by Stefan Ritt on Fri May 18 08:04:38 2007  Ok, now I understand. Well, your request is very special for your case. Usually I implement things only if several independent people ask for it. What you can try is to save your logbook in CSV format, import it into Excel or another spreadsheet program, and achieve the filtering there.                Re: Summary view: View only most recent entry for all values of a given attribute?, posted by Dennis Seitz on Fri May 18 16:07:31 2007  [quote="Stefan Ritt"]Ok, now I understand. Well, your request is very special for your case. Usually I implement things only if several independent people ask for it. What you can try is to save your logbook in CSV format, import it into Excel or another spreadsheet program, and achieve the filtering there.   Import log, posted by bob on Tue Apr 24 11:00:56 2007  Hi, it is possible to import the file *.log of Elog towards another Elog?  thank you       Re: Import log, posted by Stefan Ritt on Tue Apr 24 12:26:32 2007  [quote="bob"]Hi, it is possible to import the file *.log of Elog towards another Elog?  thank you          Re: Import log, posted by bob on Tue Apr 24 14:43:07 2007  [quote="Stefan Ritt"][quote="bob"]Hi, it is possible to import the file *.log of Elog towards another Elog?  thank you             Re: Import log, posted by Stefan Ritt on Thu May 10 13:03:51 2007  [quote="bob"]thank you,  but the last method (simplest for me) does not import the comment. it's a pity...[/quote]   Change default for suppressing email notification and/or targeting entries manually, posted by Alan Stone on Thu Jun 22 16:01:58 2006  I want to change the default for suppressing email notification.   I want to be able to send email to Elog subscribers and to other people       Re: Change default for suppressing email notification and/or targeting entries manually, posted by Stefan Ritt on Thu Jun 22 17:19:32 2006  [quote="Alan Stone"]I want to be able to send email to Elog subscribers and to other people not yet subscribed to the Elog.  However, after polling the current subscribers, they do NOT want to receive email notification for every           Re: Change default for suppressing email notification and/or targeting entries manually, posted by Alan Stone on Thu Jun 22 20:43:39 2006  Thank you for your response.  I do not think I posed my questions clearly. Let me try a different way. If I set the following logbook configuration:             Re: Change default for suppressing email notification and/or targeting entries manually, posted by Stefan Ritt on Thu Jun 22 21:02:16 2006  [quote="Alan Stone"]However, I want to invert the default check box, so that no email is sent to subscribers unless someone takes the extra step to check a box which might read "Send Email notification".[/quote]       Re: Change default for suppressing email notification and/or targeting entries manually, posted by Stefan Ritt on Tue May 1 16:54:12 2007  [quote="Alan Stone"]I would also like the option to add additional email addresses on the fly.[/quote] There is a simple way to accomplish this. Define a new attribute, let's call it [I]"cc"[/I]. Then add to your config file following statement:   Upgraded from 2.6.1 to 2.6.5, but cannot login now & top.html is not displayed, posted by Alan Stone on Mon Apr 30 20:52:51 2007  We followed the simple download instructions.  Our existing logbook entries are still visible.  Nothing was lost or touched in our /usr/local/elog directory. Is there some step we missed?         Re: Upgraded from 2.6.1 to 2.6.5, but cannot login now & top.html is not displayed, posted by Stefan Ritt on Mon Apr 30 21:01:49 2007  [quote="Alan Stone"]We followed the simple download instructions.  Our existing logbook entries are still visible.  Nothing was lost or touched in our /usr/local/elog directory. Is there some step we missed?     How to make a table of contents, posted by Stefan Ritt on Fri Apr 27 14:06:34 2007  For those people who have not fully understood the discussion of elog:2218, here is an example table of contents. [LINE] [ANCHOR]toc[/ANCHOR][LIST]   Is there (planned) support for <A NAME> and <HR /> in ELCODE?, posted by Kevin McCarty on Thu Apr 26 16:43:45 2007  Hello, I am wondering if there is any support (or if not, if it is planned) for inserting HTML <a name> and <hr /> tags via ELCODE.  This would be useful for       Re: Is there (planned) support for <A NAME> and <HR /> in ELCODE?, posted by Stefan Ritt on Fri Apr 27 08:38:58 2007  [quote="Kevin McCarty"]I am wondering if there is any support (or if not, if it is planned) for inserting HTML <a name> and <hr /> tags via ELCODE.[/quote] Very good idea. The horizontal line [line] is already implemented via [B]\[LINE][/B] and the anchor tag will soon follow.          Re: Is there (planned) support for <A NAME> and <HR /> in ELCODE?, posted by Kevin McCarty on Fri Apr 27 08:56:10 2007  [quote="Stefan Ritt"][quote="Kevin McCarty"]I am wondering if there is any support (or if not, if it is planned) for inserting HTML <a name> and <hr /> tags via ELCODE.[/quote]       Re: Is there (planned) support for <A NAME> and <HR /> in ELCODE?, posted by Stefan Ritt on Fri Apr 27 13:06:59 2007  [quote="Kevin McCarty"]I am wondering if there is any support (or if not, if it is planned) for inserting HTML <a name> and <hr /> tags via ELCODE.  This would be useful for long log messages in order to provide a table of contents and divide them into clear sections.  If this support already exists, I'm afraid it is not obvious to me how to access it in ELCODE.  If it does not yet exist, would you consider a patch for it?   Sorting by column title problem, posted by George Chisholm on Thu Apr 26 22:26:04 2007  Hi, I am implementing ELOG for our Gas Control Centre.       Re: Sorting by column title problem, posted by Stefan Ritt on Fri Apr 27 08:23:04 2007  [quote="George Chisholm"]I am implementing ELOG for our Gas Control Centre. Log entries sort ok when I click the ID or Date column title but not my custom attributes column headers??? Any suggestions?[/quote]   sort attributs, posted by deletoille on Wed Mar 14 11:55:54 2007  hello,  For 1 event, I need the date and the hour of this one. An event can be enter in elog several days after this one. The problem is that I do not manage to carry out one sorts on these two attibuts. I tested the order “? rsort” but this one works only on one entry not out of 2 at the same time (? rsort=Heure+evenement,       Re: sort attributs, posted by Stefan Ritt on Wed Mar 14 12:06:20 2007  [quote="deletoille"] For 1 event, I need the date and the hour of this one. An event can be enter in elog several days after this one. The problem is that I do not manage to carry out one sorts on these two attibuts. I tested the order “? rsort” but this one works only on one entry not out of 2 at the same time (? rsort=Heure+evenement,          Re: sort attributs, posted by deletoille on Wed Mar 21 16:51:14 2007  [quote="Stefan Ritt"][quote="deletoille"] For 1 event, I need the date and the hour of this one. An event can be enter in elog several days after this one. The problem is that I do not manage to carry out one sorts on these two attibuts. I tested the order “? rsort” but this one works only on one entry not out of 2 at the same time (? rsort=Heure+evenement,             Re: sort attributs, posted by Stefan Ritt on Wed Apr 25 20:29:39 2007  [quote="deletoille"]thanks, It works but the order "?sort" seems to works only in summary view (attachment 1) and not in threaded (attachement 2) view. Any idea?[/quote]   "Guest menu commands" not changing the menu line, posted by Steve Jones on Wed Mar 28 21:00:17 2007  I tried adding the lines below to my Global section, and while Guest access is turned on the menu line does not change.  I tried searching SVN change logs for a comment regarding any 'guest' bugs but found nothing.  Was this a problem at some point and fixed?  I noticed that the Midas site is running 2.6.4-1814 and the guest menus work!  Am I doing something wrong or was this a problem in the past?       Re: "Guest menu commands" not changing the menu line, posted by Steve Jones on Thu Mar 29 23:03:26 2007  [quote="Steve Jones"]I tried adding the lines below to my Global section, and while Guest access is turned on the menu line does not change.  I tried searching SVN change logs for a comment regarding any 'guest' bugs but found nothing.  Was this a problem at some point and fixed?  I noticed that the Midas site is running 2.6.4-1814 and the guest menus work!  Am I doing something wrong or was this a problem in the past?          Re: "Guest menu commands" not changing the menu line, posted by Stefan Ritt on Fri Mar 30 06:38:28 2007  [quote="Steve Jones"]Am I doing something wrong or was this a problem in the past?[/quote] I can't remember any problem of that type.             Re: "Guest menu commands" not changing the menu line, posted by Steve Jones on Fri Mar 30 16:05:20 2007  [quote="Stefan Ritt"][quote="Steve Jones"]Am I doing something wrong or was this a problem in the past?[/quote] I can't remember any problem of that type.                Re: "Guest menu commands" not changing the menu line, posted by Steve Jones on Fri Mar 30 16:42:35 2007  [quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Am I doing something wrong or was this a problem in the past?[/quote] I can't remember any problem of that type.                   Re: "Guest menu commands" not changing the menu line, posted by Stefan Ritt on Tue Apr 3 17:16:23 2007  [quote="Steve Jones"]BTW, WebSVN no longer provides a means of downloading a tar of your code trunk.  I had to go to http://midas.psi.ch/elog/download/tar/ in order to get your 2.6.4-1 revision. [/QUOTE]                      Re: "Guest menu commands" not changing the menu line, posted by Steve Jones on Wed Apr 25 19:44:34 2007  [quote="Stefan Ritt"][quote="Steve Jones"]BTW, WebSVN no longer provides a means of downloading a tar of your code trunk.  I had to go to http://midas.psi.ch/elog/download/tar/ in order to get your 2.6.4-1 revision. [/QUOTE]   is there any other way for users to have access without my being online?, posted by marion on Thu Apr 19 00:17:53 2007  is there any other way for users to have access to the ELOG without my being online? marion       Re: is there any other way for users to have access without my being online?, posted by Steve Jones on Wed Apr 25 19:42:22 2007  [quote="marion"]is there any other way for users to have access to the ELOG without my being online? marion[/quote]   ok i give up - i have to admit - i do not understand the instructions, posted by marion on Wed Apr 18 22:59:52 2007  is there a possibility to get instructions in newbie language? marion       Re: ok i give up - i have to admit - i do not understand the instructions, posted by Stefan Ritt on Thu Apr 19 07:41:19 2007  [quote="marion"]is there a possibility to get instructions in newbie language?[/quote] No. You need some basic knowledge to run elog. Without this knowledge, it's better if you use some other package.   HOW TO change http://localhost:8080/ to an address where users can access?, posted by marion on Tue Apr 10 04:03:59 2007  hi folks       Re: HOW TO change http://localhost:8080/ to an address where users can access?, posted by Stefan Ritt on Tue Apr 10 10:17:27 2007  [quote="marion"]MY QUESTION: HOW do i  change the automated address    http://localhost:8080/        to an address where users can access?          Re: HOW TO change http://localhost:8080/ to an address where users can access?, posted by marion on Wed Apr 18 13:59:14 2007  [quote="Stefan Ritt"][quote="marion"]MY QUESTION: HOW do i  change the automated address    http://localhost:8080/        to an address where users can access?             Re: HOW TO change http://localhost:8080/ to an address where users can access?, posted by Stefan Ritt on Wed Apr 18 15:04:25 2007  [quote="marion"]i am getting the idea that i am supposted to upload elog to my website ? is this correct? ie e should make a directory for ELOG and load files - what files?  or all the files that came from the downloaded ELOG PROGRAM that i placed in my c-d rive  ?                Re: HOW TO change http://localhost:8080/ to an address where users can access?, posted by marion on Wed Apr 18 22:45:57 2007  [quote="Stefan Ritt"][quote="marion"]i am getting the idea that i am supposted to upload elog to my website ? is this correct? ie e should make a directory for ELOG and load files - what files?  or all the files that came from the downloaded ELOG PROGRAM that i placed in my c-d rive  ?                   Re: HOW TO change http://localhost:8080/ to an address where users can access?, posted by Stefan Ritt on Thu Apr 19 07:40:01 2007  [quote="marion"]it is hosted by franceso - i have full access to everything - i have cpanel - [/quote] Then you have to install elog there from the RPM. See http://midas.psi.ch/elog/adminguide.html   IF i run this as a "windows server", does this mean i have to be online for users to access it?, posted by marion on Tue Apr 10 04:27:02 2007  hi again folks QUESTION       Re: IF i run this as a "windows server", does this mean i have to be online for users to access it?, posted by Stefan Ritt on Tue Apr 10 10:13:52 2007  [quote="marion"]hi again folks QUESTION          Re: IF i run this as a "windows server", does this mean i have to be online for users to access it?, posted by marion on Wed Apr 18 13:52:36 2007  [quote="Stefan Ritt"][quote="marion"]hi again folks QUESTION   HOW TO delete or edit the Accelerator config file? i can still edit my demo config file., posted by marion on Tue Apr 10 04:15:22 2007  hi again folks QUESTION       Re: HOW TO delete or edit the Accelerator config file? i can still edit my demo config file., posted by Stefan Ritt on Tue Apr 10 10:14:39 2007  [quote="marion"]hi again folks QUESTION   Multiple ideas for multiple logbooks, posted by Yoshio Imai on Tue Apr 3 13:17:27 2007  Hi! After a long pause, here we are again with a bunch of new ideas (and problems ...;) )       Re: Multiple ideas for multiple logbooks, posted by Stefan Ritt on Tue Apr 3 14:26:09 2007  [quote="Yoshio Imai"][u]1. Multiple login[/u][/quote] Well, restructuring the cookies would be rather work intensive. Right now we have one user name cookie [B]unm[/B]          Re: Multiple ideas for multiple logbooks, posted by Stefan Ritt on Tue Apr 3 15:19:00 2007  [quote="Stefan Ritt"]To distinguish betwen logbooks, one would need cookies in the form [b]<logbook name>_unm[/b] and [b]<logbook name>_upwd[/b].[/quote] Actually this is not a good idea. Most people I know have several logbooks, but a common password file. Access control is then fine-tuned via [B]'Login          Re: Multiple ideas for multiple logbooks, posted by Yoshio Imai on Tue Apr 3 17:55:21 2007  [quote="Stefan Ritt"]Well, you didn't realize, but you were my beta-tester for the keyboard shortcuts :D . I didn't yet publish it, so you must have gotten this brand new feature from SVN.[/quote] You should [B]really[/B] have told me ;) . Actually, I found out about the <Ctrl-C> issue while using [I]this[/I] logbook.             Re: Multiple ideas for multiple logbooks, posted by Stefan Ritt on Tue Apr 3 21:09:47 2007  [quote="Yoshio Imai"]When using the shortcuts and/or the ELCode buttons, sometimes the code is generated and the cursor in between the [XX] and [/XX] directive, but sometimes, the whole code directive is selected as if for editing[/quote]             Re: Multiple ideas for multiple logbooks, posted by Stefan Ritt on Tue Apr 3 22:10:56 2007  [quote="Yoshio Imai"]BTW, there are (of course  :D) two other issues. They are still present in -1826 - one bug was reported by a logbook user: when using the "find" function in a logbook, and selecting one value from the "Author" drop-down list and another from the "Category" drop-down list, the [I]elogd[/I] reports no entries found, but when specifying only the "Author" and leaving "Category" blank, many             Re: Multiple ideas for multiple logbooks, posted by Stefan Ritt on Wed Apr 4 12:14:12 2007  [quote="Yoshio Imai"]- We have one logbook top group for the beamtimes. Under certain conditions, a preset text is to be displayed.  [CODE] {2&a} Preset Text = resource/text_1.txt                Re: Multiple ideas for multiple logbooks, posted by Yoshio Imai on Wed Apr 4 14:20:41 2007  [quote="Stefan Ritt"]Maybe some other problem?[/quote] Possible, but I think it worked also on our server until the number of logbooks in the top group got larger than one. Can you try to see if your code still works when there is more than one logbook defined?                   Re: Multiple ideas for multiple logbooks, posted by Stefan Ritt on Thu Apr 5 10:01:06 2007  [quote="Yoshio Imai"] Possible, but I think it worked also on our server until the number of logbooks in the top group got larger than one. Can you try to see if your code still works when there is more than one logbook defined?[/quote]       Re: Multiple ideas for multiple logbooks, posted by Stefan Ritt on Wed Apr 4 08:38:30 2007  [quote="Yoshio Imai"][u]1. Multiple login[/u] Is there any way to change the cookie structure so as to allow one (physical) user to be logged on as more than one [i]elog[/i] user at a time?[/quote]          Re: Multiple ideas for multiple logbooks, posted by Yoshio Imai on Wed Apr 4 11:37:56 2007  [quote="Stefan Ritt"]Actually there is a way[/quote] ... and it works! Thank you!   Global "MOptions", posted by Fergus Lynch on Mon Mar 26 11:45:07 2007  Hi, We have ELOG configured for virtually every conceivable use in our IT Operation dept and it is fantastically useful and easy to use.  One result of this       Re: Global "MOptions", posted by Stefan Ritt on Mon Mar 26 13:03:05 2007  [quote="Fergus Lynch"]Would it be an option to have Global "MOptions" - perhaps configured in the 'global options' file - which can be called up and referenced in all logbooks?[/quote]          Re: Global "MOptions", posted by Fergus Lynch on Tue Mar 27 13:57:44 2007  [quote="Stefan Ritt"][quote="Fergus Lynch"]Would it be an option to have Global "MOptions" - perhaps configured in the 'global options' file - which can be called up and referenced in all logbooks?[/quote]   Private logbook - no guest access?, posted by Ben Shepherd on Tue Mar 20 13:45:20 2007  Hi, I want to set up a logbook which you have to be logged in to be able to read entries. I've already got three logbooks which can be viewed by anyone but       Re: Private logbook - no guest access?, posted by Stefan Ritt on Tue Mar 20 13:48:50 2007  [quote="Ben Shepherd"]I want to set up a logbook which you have to be logged in to be able to read entries. I've already got three logbooks which can be viewed by anyone but only logged-in users can modify them. For the fourth one, I want to have a private logbook which can't be read by 'guest' users. Is this possible?[/quote]          Re: Private logbook - no guest access?, posted by Ben Shepherd on Tue Mar 20 14:42:05 2007  [quote="Stefan Ritt"][quote="Ben Shepherd"]I want to set up a logbook which you have to be logged in to be able to read entries. I've already got three logbooks which can be viewed by anyone but only logged-in users can modify them. For the fourth one, I want to have a private logbook which can't be read by 'guest' users. Is this possible?[/quote]   submit modified elog entry, posted by deletoille on Wed Mar 14 11:31:35 2007  hello, I have small a bug,  when I create an entry. Per moment the program requires of me: "Submit modified Elog entry"  if I answer yes, Eog create 2 entry identical.        Re: submit modified elog entry, posted by Stefan Ritt on Mon Mar 19 19:51:26 2007  [quote="deletoille"]hello, I have small a bug,  when I create an entry. Per moment the program requires of me: "Submit modified Elog entry"  if I answer yes, Eog create 2 entry identical.    Addition of a "Restrict edit attribute" option?, posted by Justin Ellison on Tue Mar 13 17:27:49 2007  It would be a nice addition to have a config file option named "Restrict edit attribute". Basically, I would like to have an attribute that was either:       Re: Addition of a "Restrict edit attribute" option?, posted by Stefan Ritt on Tue Mar 13 20:58:07 2007  [quote="Justin Ellison"]It would be a nice addition to have a config file option named "Restrict edit attribute". Basically, I would like to have an attribute that was either:          Re: Addition of a "Restrict edit attribute" option?, posted by Justin Ellison on Wed Mar 14 15:03:41 2007  Sorry, I didn't explain it enough. This feature is like "Restrict edit time", but instead of setting an entire entry as read only after n hours, we set it read only if attribute y is true.             Re: Addition of a "Restrict edit attribute" option?, posted by Stefan Ritt on Wed Mar 14 15:06:27 2007  [quote="Justin Ellison"]Sorry, I didn't explain it enough. This feature is like "Restrict edit time", but instead of setting an entire entry as read only after n hours, we set it read only if attribute y is true.                Re: Addition of a "Restrict edit attribute" option?, posted by Justin Ellison on Wed Mar 14 15:43:51 2007  [quote="Stefan Ritt"] I understand what you want. The conditional attributes I showed you give you that functionality, except that unlocking is a bit painful for the admin (has to edit the config file each time). Sorry, but that's all I can give you.[/quote]   Hiding attributes in Detail view?, posted by Justin Ellison on Fri Mar 2 16:39:22 2007  First off, thanks so much for this product.  It works excellent for us as a server activity log.  I have a question, which depending on the answer, might be a feature request ;-)       Re: Hiding attributes in Detail view?, posted by Justin Ellison on Fri Mar 9 22:14:57 2007  Any takers?       Re: Hiding attributes in Detail view?, posted by Stefan Ritt on Mon Mar 12 20:35:17 2007  [quote="Justin Ellison"]The only thing that isn't working as I'd like is when someone views a log entry.  Both Bug Number and Bugzilla show up in the attributes. This isn't a huge deal, it's just showing redundant data.   Search all logbooks as default, posted by An Thai on Mon Mar 5 14:41:20 2007  Hello all,       Re: Search all logbooks as default, posted by Stefan Ritt on Thu Mar 8 08:08:42 2007  [quote="An Thai"]do you know how I can default set the option "Search all logbooks" in the Find page selected/checked?[/quote] I added the option   Upgrade to 2.6.4 broke quick search, posted by T. Ribbrock on Tue Mar 6 16:59:13 2007  Hi! I just went from 2.6.1 to 2.6.4 and since the upgrade, the quick search drop-down menus no longer work. I can select an attribute, but when I do so, I       Re: Upgrade to 2.6.4 broke quick search, posted by T. Ribbrock on Tue Mar 6 17:03:43 2007  [quote="T. Ribbrock"] [...] I just went from 2.6.1 to 2.6.4 and since the upgrade, the quick search drop-down menus no longer work. I can select an attribute, but when I do so, I   Conditional Email Notification by a text file, posted by An Thai on Thu Nov 2 14:34:36 2006  Hello, I try to email by using a email text file to reduce the admin work.       Re: Conditional Email Notification by a text file, posted by Steve Jones on Thu Nov 2 23:16:11 2006  [quote="An Thai"]Hello, I try to email by using a email text file to reduce the admin work.          Re: Conditional Email Notification by a text file, posted by An Thai on Fri Nov 3 01:03:33 2006  [quote="Steve Jones"][quote="An Thai"]Hello, I try to email by using a email text file to reduce the admin work.             Re: Conditional Email Notification by a text file, posted by Steve Jones on Fri Nov 3 03:42:18 2006  [quote="An Thai"][quote="Steve Jones"][quote="An Thai"]Hello, I try to email by using a email text file to reduce the admin work.                Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Thu Nov 9 20:45:32 2006  [quote="Steve Jones"][quote="An Thai"][quote="Steve Jones"][quote="An Thai"]Hello, I try to email by using a email text file to reduce the admin work.                   Re: Conditional Email Notification by a text file, posted by An Thai on Thu Nov 9 23:25:15 2006  [quote="Stefan Ritt"][quote="Steve Jones"][quote="An Thai"][quote="Steve Jones"][quote="An Thai"]Hello, I try to email by using a email text file to reduce the admin work.                      Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Fri Nov 10 07:51:59 2006  [quote="An Thai"]I tested many times and find out the problem.  The first opening CMD and running "elogd -v -x". It works perfektly. Close the CMD: It stops to work.                         Re: Conditional Email Notification by a text file, posted by Grant Jeffcote on Sat Nov 11 06:56:16 2006  Stefan, this is a great idea (thanks An). I can't seem to get this working when Elogd is started as a service though?                            Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Sat Nov 11 18:36:44 2006  [quote="Grant Jeffcote"]I can't seem to get this working when Elogd is started as a service though? Starting elogd (-x) manually works fine and with the -v switch I can see it is operating correctly but obviously the service option is preferred. The service ("D:\ELOG\elogd.exe" -x -D -c "D:\ELOG\elogd.cfg") is starting correctly using the -x switch (as I use the shell command for other elog options)                               Re: Conditional Email Notification by a text file, posted by Grant Jeffcote on Sat Nov 11 18:48:48 2006  Thanks Stefan,  I understand that and the registry entry that I use (for the service) is what I had quoted below.                                  Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Sat Nov 11 18:54:59 2006  [quote="Grant Jeffcote"]The problem I have is that when Elog is started as a service using the -x switch then the shell command using An's mail list suggestion does not work? Starting the elogd daemon manually (ie using the command prompt) does work.[/quote]                                     Re: Conditional Email Notification by a text file, posted by Grant Jeffcote on Sat Nov 11 21:31:33 2006  All paths are absolute and file permissions set to 'everyone'. 'Preset text' results in the contents of the text file being shown so access doesn't seem to be the problem here. Can you reproduce this?                                        Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Wed Nov 15 20:22:29 2006  [quote="Grant Jeffcote"]Can you reproduce this?[/quote] Yes, I get the same error. Shell substitution does not work when elogd is started as a service. This is a problem deep inside the service management of                                           Re: Conditional Email Notification by a text file, posted by An Thai on Thu Nov 16 14:07:32 2006  I have found the way to get it work properly. [LIST]                                              Re: Conditional Email Notification by a text file, posted by An Thai on Thu Mar 1 15:27:31 2007  Dear All, I have got very good feedback from my colleagues about Elog logbook which I have made at my work since October 2006. The tool is going to use improving.                                                 Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Thu Mar 1 22:10:11 2007  [quote="An Thai"][SIZE=3][COLOR=red] Dear Stefan, could you enable it for the install download file for Windows?[/COLOR][/SIZE][/quote]                                                    Re: Conditional Email Notification by a text file, posted by An Thai on Tue Mar 6 13:49:17 2007  Dear Stefan, what i mean is that you maybe modify the setup file for Windows (elog-latest.exe) so that everybody can make change of -[options] while install Elog. I                                                       Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Tue Mar 6 13:55:15 2007  [quote="An Thai"]Dear Stefan, what i mean is that you maybe modify the setup file for Windows (elog-latest.exe) so that everybody can make change of -[options] while install Elog. I   Finding conditions in Search page., posted by Robert-Jan Schrijvers on Thu Mar 1 15:46:59 2007  Hi all, My config file (a part of it) looks like this:       Re: Finding conditions in Search page., posted by Stefan Ritt on Thu Mar 1 22:36:01 2007  [quote="Robert-Jan Schrijvers"]This is my question: when i use the "search/find" page and select the first drop down menu "Locatie", the next field "Sessies" will not be displayed (and all following fields either). On the other hand, when i create a new entry, it works perfect, select "Locatie", field "Sessies" displays his content and so on. I hope that someone can help me with this.[/quote]          Re: Finding conditions in Search page., posted by Robert-Jan Schrijvers on Fri Mar 2 09:40:28 2007  [quote="Stefan Ritt"][quote="Robert-Jan Schrijvers"]This is my question: when i use the "search/find" page and select the first drop down menu "Locatie", the next field "Sessies" will not be displayed (and all following fields either). On the other hand, when i create a new entry, it works perfect, select "Locatie", field "Sessies" displays his content and so on. I hope that someone can help me with this.[/quote]   Bug, posted by Robert-Jan Schrijvers on Thu Mar 1 15:55:52 2007  when i was editting my Admin file, by mistake i typed the next line: [COLOR=blue][B][a}[/B]Options Sessies = p-zis-pr1{1}, p-szh-pro{2}, p-dia-pro{3}, a-zis-ac1{1}, a-zis-ac2{2}, a-dia-acc{3}, ---------------------, Anders       Re: Bug, posted by Stefan Ritt on Thu Mar 1 22:19:22 2007  [quote="Robert-Jan Schrijvers"]when i was editting my Admin file, by mistake i typed the next line: [COLOR=blue][B][a}[/B]Options Sessies = p-zis-pr1{1}, p-szh-pro{2}, p-dia-pro{3}, a-zis-ac1{1}, a-zis-ac2{2}, a-dia-acc{3}, ---------------------, Anders   Simple table implemented in ELCode, posted by Stefan Ritt on Wed Feb 28 21:04:59 2007  Starting from SVN revision 1801, simple tables are supported in ELCode tags. One can now embed tables in elog entries like this: [code]   Hardcoded Path in Makefile, posted by Martin Killenberg on Tue Feb 20 18:41:31 2007  I tried to compile ELOG on Scientific Linux Cern 4.4 and found that make quits because uname is not located in /usr/bin (like it is hardcoded in the makefile) but in /bin. Later I found that this is only the case in the svn version, in the "latest.tar.gz" from 2007/02/20 the path is /bin.       Re: Hardcoded Path in Makefile, posted by Stefan Ritt on Tue Feb 20 21:10:28 2007  [quote="Martin Killenberg"]I tried to compile ELOG on Scientific Linux Cern 4.4 and found that make quits because uname is not located in /usr/bin (like it is hardcoded in the makefile) but in /bin. Later I found that this is only the case in the svn version, in the "latest.tar.gz" from 2007/02/20 the path is /bin.   Required and {}, posted by bob on Wed Feb 14 16:46:27 2007  Hi,  I still have a question,         Re: Required and {}, posted by Stefan Ritt on Fri Feb 16 17:19:30 2007  [quote="bob"]generally, can one handle "Required" and "{}" or "{ , }", ...[/quote] For simple configuration files, that should work. If I have for example:          Re: Required and {}, posted by bob on Mon Feb 19 20:46:39 2007  [quote="Stefan Ritt"][quote="bob"]generally, can one handle "Required" and "{}" or "{ , }", ...[/quote] For simple configuration files, that should work. If I have for example:   Preset of a drop-down box entry with a "%" character, posted by Tobias Bagger on Sun Feb 18 10:51:13 2007  How do I preset a drop-down box entry which contains a % character? I use following lines in the elogd.cfg:       Re: Preset of a drop-down box entry with a "%" character, posted by Stefan Ritt on Mon Feb 19 11:29:03 2007  [quote="Tobias Bagger"]How do I preset a drop-down box entry which contains a % character?[/quote] The problem was that '%' is used in auto-generated preset tags like [B]XYZ-%Y-%b-###[/B] (see documentation). I made the auto-generation a bit more clever   Setting From: for registration/password e-mails, posted by Ben Waugh on Fri Feb 16 12:08:19 2007  We had a problem, as mentioned in the documentation, with "new password" e-mails being rejected because the default From: address is invalid, so we changed this using "Use Email From".       Re: Setting From: for registration/password e-mails, posted by Stefan Ritt on Fri Feb 16 16:45:33 2007  [quote="Ben Waugh"]We had a problem, as mentioned in the documentation, with "new password" e-mails being rejected because the default From: address is invalid, so we changed this using "Use Email From".          Re: Setting From: for registration/password e-mails, posted by Stefan Ritt on Fri Feb 16 17:14:53 2007  [quote="Stefan Ritt"]Right. The logic in the program and the documentation disagreed. The program uses the "Use Email From" address always if it's there, while the documentation gives preference to the user's email address. I change that in the program so that it agrees with the documentation. The modification is in SVN revision 1789 and will be contained in the upcoming next release.[/quote]   About Extendable, posted by bob on Tue Feb 13 15:57:25 2007  Hi,  I have a problem and I do not understand why        Re: About Extendable, posted by Stefan Ritt on Fri Feb 16 17:01:45 2007  [quote="bob"]Hi,  I have a problem and I do not understand why    Various attributes and columns “list” , posted by bob on Tue Feb 13 16:46:54 2007  Re Hi, Is it possible to put various (and choose  them) the attributes in the SAME columns of the “list” ??       Re: Various attributes and columns “list” , posted by Stefan Ritt on Tue Feb 13 17:25:11 2007  [quote="bob"]Re Hi, Is it possible to put various (and choose  them) the attributes in the SAME columns of the “list” ?? [/quote]          Re: Various attributes and columns “list” , posted by bob on Tue Feb 13 17:48:05 2007  [quote="Stefan Ritt"][quote="bob"]Re Hi, Is it possible to put various (and choose  them) the attributes in the SAME columns of the “list” ?? [/quote]             Re: Various attributes and columns “list” , posted by Stefan Ritt on Tue Feb 13 19:25:47 2007  [quote="bob"]in the summary,  we can look at each line with its adapted attributes.  I would like the same line which informs several attributes without modifer List display = ID, Date...                Re: Various attributes and columns “list” , posted by bob on Wed Feb 14 09:22:01 2007  [quote="Stefan Ritt"][quote="bob"]in the summary,  we can look at each line with its adapted attributes.  I would like the same line which informs several attributes without modifer List display = ID, Date...   Synchronization using https, posted by Alexandre Lindote on Thu Jan 18 16:29:43 2007  Hi,  I have an elog server running on a linux desktop machine inside our institutional firewall. It can be accessed from inside the firewall directly using       Re: Synchronization using https, posted by Stefan Ritt on Thu Jan 18 20:19:22 2007  [quote="Alexandre Lindote"] Now we want to have several servers set up (in different institutions), and have them synchronized automatically.[/quote] Synchronization works such that the "client" elogd (the one on which the synchronization is started) "emulates" a browser and accesses the other elogd          Re: Synchronization using https, posted by Marcus Hauser on Tue Feb 13 15:11:18 2007  [quote="Stefan Ritt"][quote="Alexandre Lindote"] Now we want to have several servers set up (in different institutions), and have them synchronized automatically.[/quote] Synchronization works such that the "client" elogd (the one on which the synchronization is started) "emulates" a browser and accesses the other elogd             Re: Synchronization using https, posted by Stefan Ritt on Tue Feb 13 15:36:08 2007  [quote="Marcus Hauser"]Would it be possible to use rsync to syncronise two elogd servers on different servers via secure synchronization on the file level? E.g. rsync -av -e ssh /var/lib/elog/logbooks/  elog.remote.de:/var/lib/elog/logbooks/ [/quote]   ELOG Crash by many email address, posted by An Thai on Fri Jan 12 15:28:46 2007  Hello, when I try to set above 112 email addresses in        Re: ELOG Crash by many email address, posted by Stefan Ritt on Tue Jan 16 23:01:30 2007  [quote="An Thai"]Hello, when I try to set above 112 email addresses in           Re: ELOG Crash by many email address, posted by Grant Jeffcote on Tue Feb 6 18:19:57 2007  [quote="Stefan Ritt"][quote="An Thai"]Hello, when I try to set above 112 email addresses in    Two different attributes with the same list, posted by deletoille on Wed Jan 17 09:20:17 2007  In this picture of my project, All the attributes included in the red circle are the same except the names of the attribute “Equipement Incriminé” and “Equipement impacté”. “Equipement Incriminé” and “Equipement impacté” have the same list.       Re: Two different attributes with the same list, posted by Stefan Ritt on Wed Jan 17 12:49:25 2007  [quote="deletoille"]In this picture of my project, All the attributes included in the red circle are the same except the names of the attribute “Equipement Incriminé” and “Equipement impacté”. “Equipement Incriminé” and “Equipement impacté” have the same list.          Re: Two different attributes with the same list, posted by deletoille on Wed Jan 17 13:27:46 2007  [quote="Stefan Ritt"][quote="deletoille"]In this picture of my project, All the attributes included in the red circle are the same except the names of the attribute “Equipement Incriminé” and “Equipement impacté”. “Equipement Incriminé” and “Equipement impacté” have the same list.             Re: Two different attributes with the same list, posted by Stefan Ritt on Wed Jan 17 13:33:27 2007  [quote="deletoille"]Do I have to program the list for "Equipement Impacté" or is there a simple command to say that "Equipement incrimé" and "equipement inpacté" have the same list?[/quote]   How many topgroups can be defined?, posted by Exaos Lee on Sat Jan 13 17:35:45 2007  I defined 6 top groups in my cfg file as the attachment. But ... It doesn't work as I wanted. The 4th and 5th groups need login. But when I clicked the 4th or 5th group, the login isn't needed.       Re: How many topgroups can be defined?, posted by Stefan Ritt on Wed Jan 17 12:55:07 2007  [quote="Exaos Lee"]I defined 6 top groups in my cfg file as the attachment. But ... It doesn't work as I wanted. The 4th and 5th groups need login. But when I clicked the 4th or 5th group, the login isn't needed.   Addition of a Print CSS, posted by Ian MacDonald on Mon Jan 15 09:56:09 2007  Is there any way to change the the embeded style sheet reference to allow a seperate style sheet for printing ? Default config:-         Re: Addition of a Print CSS, posted by Stefan Ritt on Tue Jan 16 21:13:42 2007  [quote="Ian MacDonald"]Is there any way to change the the embeded style sheet reference to allow a seperate style sheet for printing ? Default config:-     Group definition under top group, posted by Exaos Lee on Sat Jan 13 17:47:45 2007  Hi, I think, if we can put the "Group xxx = xxx" under some "global xxxx" sections, the configure file will be more clean. Don't you think so? In fact, if the "Group XXX" sections are put under "global XXX" section, the "Top Group XXX" can be ignored. I also found that some options (e.g. "Logbook dir =") under "global" don't work under "global XXX".   Chinese language files updated, posted by Exaos Lee on Wed Jan 10 22:54:56 2007  As the attachment. Sorry for no update long time.   Preset reply date to nothing, posted by herman on Mon Dec 11 18:02:12 2006  How do I preset the reply date to an empty box(es)? In 2.5.x it worked as       Re: Preset reply date to nothing, posted by Stefan Ritt on Tue Dec 12 15:45:48 2006  > How do I preset the reply date to an empty box(es)? >  > In 2.5.x it worked as   Email notification (bug tracking system), posted by Bertram Metz on Fri May 5 14:49:19 2006  Hello, I'd like to use ELOG like a bug tracking system. I've created an attribute with the name [I]AssignedTo[/I]. The attribute type is set to [I]userlist[/I].       Re: Email notification (bug tracking system), posted by Stefan Ritt on Thu Nov 9 22:53:27 2006  [quote="Bertram Metz"]Hello, I'd like to use ELOG like a bug tracking system. I've created an attribute with the name [I]AssignedTo[/I]. The attribute type is set to [I]userlist[/I].          Re: Email notification (bug tracking system), posted by Bertram Metz on Thu Nov 30 16:07:54 2006  [quote="Stefan Ritt"][quote="Bertram Metz"]Hello, I'd like to use ELOG like a bug tracking system. I've created an attribute with the name [I]AssignedTo[/I]. The attribute type is set to [I]userlist[/I].   Resubmit-as-new-entry behaviour when synchronizing/mirroring, posted by Andreas Warburton on Fri Nov 24 23:08:33 2006  Hello, I am running two ELOG installations: one on my Windows laptop; the other on a Debian linux web server.  I have mirroring set up between the two installations.       Re: Resubmit-as-new-entry behaviour when synchronizing/mirroring, posted by Stefan Ritt on Tue Nov 28 12:50:19 2006  [quote="Andreas Warburton"]Thanks for any comments or insights.[/quote] This problem was introduced a couple of months ago. It is now fixed in the new version 2.6.3.   Version 2.6.3 released today, posted by Stefan Ritt on Tue Nov 28 12:48:47 2006  Dear ELOG users, ELOG version 2.6.3 has been released today. It contains all the bug fixes, security fixes and a few new features collected since the last release which   How to do a preset on MOptions attributes ?, posted by Stephane LE on Fri Nov 24 11:01:22 2006  Hi, I'm new to elog and I was wondering if it is possible to do some presets on MOptions attributes when displaying a new form ? I've read the elogd config       Re: How to do a preset on MOptions attributes ?, posted by Stephane LE on Fri Nov 24 14:40:42 2006  easy... Preset MyAttribute = choice1 | choice2 | choice3   Securing Elog with SSL and Apache, posted by damon nettles on Fri Nov 26 17:13:27 2004  there is a guide on the contributions logbook at elog:Contributions/11       Re: Securing Elog with SSL and Apache, posted by Rob Mahurin on Wed Nov 22 02:55:48 2006  Hi, I am an apache ignoramus who has been trying to follow these instructions on a Debian 3.1 box.  I got hung up for   $long_name in Moptions, posted by Fergus Lynch on Mon Nov 20 16:23:37 2006  Hi, Is there a way of having $long_name in 'Moptions'?         Re: Re: $long_name in Moptions, posted by Stefan Ritt on Mon Nov 20 22:20:22 2006  [quote="Fergus Lynch"]Hi, Is there a way of having $long_name in 'Moptions'?            Re: Re: $long_name in Moptions, posted by Fergus Lynch on Tue Nov 21 09:44:30 2006  [quote="Stefan Ritt"][quote="Fergus Lynch"]Hi, Is there a way of having $long_name in 'Moptions'?            Re: Re: $long_name in Moptions, posted by Fergus Lynch on Tue Nov 21 11:14:48 2006  [quote="Stefan Ritt"][quote="Fergus Lynch"]Hi, Is there a way of having $long_name in 'Moptions'?     Attributes according to users, posted by ather khan on Sat Nov 18 11:19:14 2006  Hi, Is it possible to have certain attributtes available to certain user in one log boolk. We have log book where the supervisor assign jobs to employees and we want only supervisor to have assign to attributes available and others only to view       Re: Attributes according to users, posted by Stefan Ritt on Sat Nov 18 17:13:22 2006  [quote="ather khan"]Hi, Is it possible to have certain attributtes available to certain user in one log boolk. We have log book where the supervisor assign jobs to employees and we want only supervisor to have assign to attributes available and others only to view   add field type to automatically email CC, posted by Mark Bergman on Thu May 25 19:41:51 2006  I've got logbooks where I'm submitting entries on behalf of other users, or where other people should be notified of the ticket. This isn't a fixed list of people, and shouldn't be hard-coded into a config file. I've got a field to enter the user's e-mail address, but there's no action associated with that data.       Re: add field type to automatically email CC, posted by Stefan Ritt on Thu Nov 9 22:08:10 2006  [quote="Mark Bergman"]I've got logbooks where I'm submitting entries on behalf of other users, or where other people should be notified of the ticket. This isn't a fixed list of people, and shouldn't be hard-coded into a config file. I've got a field to enter the user's e-mail address, but there's no action associated with that data.          Re: add field type to automatically email CC, posted by Arckonit on Wed Nov 15 18:50:02 2006  [quote="Stefan Ritt"][quote="Mark Bergman"]I've got logbooks where I'm submitting entries on behalf of other users, or where other people should be notified of the ticket. This isn't a fixed list of people, and shouldn't be hard-coded into a config file. I've got a field to enter the user's e-mail address, but there's no action associated with that data.             Re: add field type to automatically email CC, posted by Stefan Ritt on Wed Nov 15 19:33:17 2006  [quote="Arckonit"]mmmm when i try your suggestion, it doesn't work : error from the smtp server Erreur lors de l'envoi d'un mél. via "172.20.0.2": Issue RCPT TO: command before DATA command[/quote]   Report printing, posted by Eric Krise on Mon Nov 13 18:10:42 2006  Is there a way to print a summary of all (or selected) log books on a scheduled basis, say like every morning @ 7:00 am?  I would like a printed copy of our daily logs (24 hr period).  Thanks     Eric       Re: Report printing, posted by Stefan Ritt on Mon Nov 13 20:22:02 2006  [quote="Eric Krise"]Is there a way to print a summary of all (or selected) log books on a scheduled basis, say like every morning @ 7:00 am?  I would like a printed copy of our daily logs (24 hr period).  Thanks     Eric[/quote]   Outlook, Outlook Express and Free Webmail have problem with <br />, posted by An Thai on Thu Nov 9 23:52:26 2006  If users reply an entry, the notification email cannot be displayed correctly in Outlook, Outlook Express and Webmail.  I look at the source code and see <br />. It could be the reason.       Re: Outlook, Outlook Express and Free Webmail have problem with <br />, posted by Stefan Ritt on Fri Nov 10 07:46:27 2006  [quote="An Thai"]If users reply an entry, the notification email cannot be displayed correctly in Outlook, Outlook Express and Webmail.  I look at the source code and see <br />. It could be the reason.[/quote]          Re: Outlook, Outlook Express and Free Webmail have problem with <br />, posted by Steve Jones on Fri Nov 10 12:55:38 2006  [quote="Stefan Ritt"][quote="An Thai"]If users reply an entry, the notification email cannot be displayed correctly in Outlook, Outlook Express and Webmail. I look at the source code and see <br />. It could be the reason.[/quote]   Option to require new user registration to subscribe to ALL logbooks, posted by Steve Jones on Mon Nov 6 19:03:11 2006  Stefan, any chance of having an option that eliminates the ability of new users to pick the logbooks they can register with?  I would like to limit this to the "admin" user to pick per individual.       Re: Option to require new user registration to subscribe to ALL logbooks, posted by Stefan Ritt on Thu Nov 9 22:57:38 2006  [quote="Steve Jones"]Stefan, any chance of having an option that eliminates the ability of new users to pick the logbooks they can register with?  I would like to limit this to the "admin" user to pick per individual.[/quote]          Re: Option to require new user registration to subscribe to ALL logbooks, posted by Steve Jones on Thu Nov 9 23:37:37 2006  [quote="Stefan Ritt"][quote="Steve Jones"]Stefan, any chance of having an option that eliminates the ability of new users to pick the logbooks they can register with?  I would like to limit this to the "admin" user to pick per individual.[/quote]   How can I configure to prevent empty entries?, posted by Alan Stone on Mon Apr 10 20:28:37 2006  I have accidentally created a couple of entries recently.  It is pretty easy.  I fill in the header, type in a Subject, and then hit Enter, instead of TAB. I have turned off the edit option intentionally.       Re: How can I configure to prevent empty entries?, posted by Stefan Ritt on Thu Nov 9 23:10:08 2006  [quote="Alan Stone"]I have accidentally created a couple of entries recently.  It is pretty easy.  I fill in the header, type in a Subject, and then hit Enter, instead of TAB. I have turned off the edit option intentionally.   Is it possible to require certain attributes for specific users (guests)?, posted by Mark Bergman on Tue May 2 22:58:48 2006  First of all, thanks for writing and maintaining eLog. I've been using it for a few years, but I'm now introducing it in an environment that may have a lot of "Guest"       Re: Is it possible to require certain attributes for specific users (guests)?, posted by Stefan Ritt on Wed May 3 08:31:52 2006  > First of all, thanks for writing and maintaining eLog. >  > I've been using it for a few years, but I'm now introducing it in an environment that may have a lot of "Guest"       Re: Is it possible to require certain attributes for specific users (guests)?, posted by Stefan Ritt on Thu Nov 9 23:04:32 2006  > First of all, thanks for writing and maintaining eLog. >  > I've been using it for a few years, but I'm now introducing it in an environment that may have a lot of "Guest"   suggestion for "new user registration" page, posted by Mark Bergman on Sat May 6 02:12:10 2006  I'm testing elog, and one user was having difficulty creating a new account for himself. This problem had three reasons: 1. the user expected a "submit" button or some other way to exit the account registration screen to appear near the password boxes, at the bottom of the       Re: suggestion for "new user registration" page, posted by Stefan Ritt on Thu Nov 9 22:40:06 2006  [quote="Mark Bergman"]Suggestions for improving the registration page: Put a "submit" button after the password entry.   Problem with large entry size, posted by Dimitrios Tsirigkas on Mon Oct 16 16:20:06 2006  Hi Stefan,  I have posted an entry of approximately a thousand lines (ten thousand words). Posting it took some time, which is logical to a certain degree. However,       Re: Problem with large entry size, posted by Stefan Ritt on Mon Oct 16 16:53:43 2006  [quote="Dimitrios Tsirigkas"]I have posted an entry of approximately a thousand lines (ten thousand words). Posting it took some time, which is logical to a certain degree. However, whenever a user asks for "Full" view of the logbook, the page takes around two minutes to load and the CPU usage on the elog server goes to beyond 90% for all this time. Is this to be expected for an entry of that size or is there something going wrong here?[/quote]          Re: Problem with large entry size, posted by Stefan Ritt on Mon Oct 16 17:18:58 2006  I improved the performance by some factor in SVN revision 1733. Can you give it a try and report your speed improvement? Depending on the result, I can probably do even a bit better with some more effort.             Re: Problem with large entry size, posted by Dimitrios Tsirigkas on Mon Oct 16 17:32:58 2006  [quote="Stefan Ritt"]I improved the performance by some factor in SVN revision 1733. Can you give it a try and report your speed improvement? Depending on the result, I can probably do even a bit better with some more effort.          Re: Problem with large entry size, posted by Dimitrios Tsirigkas on Tue Oct 17 14:39:29 2006  [quote="Stefan Ritt"] The problem lies in the ELCode parsing. When you post an entry in ELCode form, the elogd server has to parse every word to see if it's any of the ELcode tags. This is right now implemented in a kind of poor way, such that it takes very long for long entries. I will work to optimize that. In the meantime,             Re: Problem with large entry size, posted by Stefan Ritt on Tue Oct 17 14:42:58 2006  [quote="Dimitrios Tsirigkas"]I was wondering what is the cleanest way of changing old entries already submitted in ELCode into plain text. If I do not include ELCode in the allowed encodings does this apply to already submitted entries as well or will they still be treated as ELCode?[/quote]                Re: Problem with large entry size, posted by Dimitrios Tsirigkas on Tue Oct 17 14:47:53 2006  Thanks Stefan, [quote="Stefan Ritt"] Did you try the new version, would be interesting to see if it's any better... [/quote]                Re: Problem with large entry size, posted by Dimitrios Tsirigkas on Mon Oct 23 12:53:08 2006  Hi Stefan, A lot of performance-related trouble for us comes from the ability of users to click on "All" and display thousands of entries on the same page. Is there                   Re: Problem with large entry size, posted by Stefan Ritt on Tue Oct 24 21:58:54 2006  [quote="Dimitrios Tsirigkas"]Hi Stefan, A lot of performance-related trouble for us comes from the ability of users to click on "All" and display thousands of entries on the same page. Is there                      Re: Problem with large entry size, posted by Dimitrios Tsirigkas on Thu Nov 2 10:14:11 2006  [quote="Stefan Ritt"]What about a threshold for the "All" display? If a logbook contains less than, let's say, 500 entries, the "All" link is displayed, and above 500 entries it's hidden. Would that make sense?[/quote]                         Re: Problem with large entry size, posted by Stefan Ritt on Thu Nov 9 21:22:27 2006  [quote="Dimitrios Tsirigkas"][quote="Stefan Ritt"]What about a threshold for the "All" display? If a logbook contains less than, let's say, 500 entries, the "All" link is displayed, and above 500 entries it's hidden. Would that make sense?[/quote]   ELCode, posted by Alexandre Lindote on Wed Oct 25 18:00:24 2006  Hi,  can you think of any obvious reason why the ELCode would not work in the logbooks I set up?       Re: ELCode, posted by Stefan Ritt on Wed Oct 25 19:44:11 2006  [quote="Alexandre Lindote"]can you think of any obvious reason why the ELCode would not work in the logbooks I set up?[/quote] There is a good reason why this forum contains a [B]ELOG Version[/B] tag which you are supposed to fill out for new entries. Without knowing which version          Re: ELCode, posted by Alexandre Lindote on Wed Oct 25 21:52:13 2006  [quote="Stefan Ritt"][quote="Alexandre Lindote"]can you think of any obvious reason why the ELCode would not work in the logbooks I set up?[/quote] There is a good reason why this forum contains a [B]ELOG Version[/B] tag which you are supposed to fill out for new entries. Without knowing which version       Re: ELCode, posted by Alexandre Lindote on Fri Oct 27 13:02:50 2006  [quote="Alexandre Lindote"]Hi,  can you think of any obvious reason why the ELCode would not work in the logbooks I set up?          Re: ELCode, posted by Stefan Ritt on Thu Nov 9 21:03:03 2006  [quote="Alexandre Lindote"][quote="Alexandre Lindote"]Hi,  can you think of any obvious reason why the ELCode would not work in the logbooks I set up?   calling a shell in the Options tag, posted by Alexandre Lindote on Tue Oct 31 20:05:07 2006  Hi,  is it possible to run a shell script in an "Options" tag, as it is with the "Preset", "Subst", and so on?       Re: calling a shell in the Options tag, posted by Steve Jones on Tue Oct 31 22:07:06 2006  [quote="Alexandre Lindote"]Hi,  is it possible to run a shell script in an "Options" tag, as it is with the "Preset", "Subst", and so on?          Re: calling a shell in the Options tag, posted by Alexandre Lindote on Wed Nov 1 09:53:05 2006  [quote="Steve Jones"][quote="Alexandre Lindote"]Hi,  is it possible to run a shell script in an "Options" tag, as it is with the "Preset", "Subst", and so on?       Re: calling a shell in the Options tag, posted by Stefan Ritt on Thu Nov 9 20:59:01 2006  [quote="Alexandre Lindote"]Hi,  is it possible to run a shell script in an "Options" tag, as it is with the "Preset", "Subst", and so on?   Denial of Service Vulnerability of elog 2.6.2-6, posted by Stefan Ritt on Wed Nov 8 13:59:52 2006  Dear ELOG users, a denial of service vulnerability has been reported which affects all elog versions prior to 2.6.2-7. With a special request one can crash the elogd server,   SVN1714 will not run in 'daemon" mode on Solaris8, posted by Steve Jones on Mon Sep 18 20:35:44 2006  On Solaris, SVN1714 will not go into daemon mode.  Running the compiled version under TRUSS (which provides a dump of every system call) and shows precisely where elog is failing.  I have attached two TRUSS outputs: one where it errors out and the other where it runs but "interactively".  Both runs are as root, simply one with and one without the "-D"       Re: SVN1714 will not run in 'daemon" mode on Solaris8, posted by Steve Jones on Mon Sep 18 22:09:23 2006  [quote="Steve Jones"]On Solaris, SVN1714 will not go into daemon mode.  Running the compiled version under TRUSS (which provides a dump of every system call) and shows precisely where elog is failing.  I have attached two TRUSS outputs: one where it errors out and the other where it runs but "interactively".  Both runs are as root, simply one with and one without the "-D"[/quote]       Re: SVN1714 will not run in 'daemon" mode on Solaris8, posted by Stefan Ritt on Fri Sep 22 07:47:58 2006  [quote="Steve Jones"]On Solaris, SVN1714 will not go into daemon mode.  Running the compiled version under TRUSS (which provides a dump of every system call) and shows precisely where elog is failing.  I have attached two TRUSS outputs: one where it errors out and the other where it runs but "interactively".  Both runs are as root, simply one with and one without the "-D"[/quote]          Re: SVN1714 will not run in 'daemon" mode on Solaris8, posted by Steve Jones on Fri Sep 22 19:32:45 2006  [quote="Stefan Ritt"][quote="Steve Jones"]On Solaris, SVN1714 will not go into daemon mode.  Running the compiled version under TRUSS (which provides a dump of every system call) and shows precisely where elog is failing.  I have attached two TRUSS outputs: one where it errors out and the other where it runs but "interactively".  Both runs are as root, simply one with and one without the "-D"[/quote]          Re: SVN1714 will not run in 'daemon" mode on Solaris8, posted by Steve Jones on Fri Sep 22 22:12:18 2006  [quote="Stefan Ritt"][quote="Steve Jones"]On Solaris, SVN1714 will not go into daemon mode.  Running the compiled version under TRUSS (which provides a dump of every system call) and shows precisely where elog is failing.  I have attached two TRUSS outputs: one where it errors out and the other where it runs but "interactively".  Both runs are as root, simply one with and one without the "-D"[/quote]             Re: SVN1723 (was SVN1714) will not run in 'daemon" mode on Solaris8, posted by Steve Jones on Tue Oct 10 23:29:53 2006  [quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]On Solaris, SVN1714 will not go into daemon mode.  Running the compiled version under TRUSS (which provides a dump of every system call) and shows precisely where elog is failing.  I have attached two TRUSS outputs: one where it errors out and the other where it runs but "interactively".  Both runs are as root, simply one with and one without the "-D"[/quote]                Re: SVN1723 (was SVN1714) will not run in 'daemon" mode on Solaris8, posted by Steve Jones on Wed Oct 11 00:19:05 2006  [quote="Steve Jones"][quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]On Solaris, SVN1714 will not go into daemon mode.  Running the compiled version under TRUSS (which provides a dump of every system call) and shows precisely where elog is failing.  I have attached two TRUSS outputs: one where it errors out and the other where it runs but "interactively".  Both runs are as root, simply one with and one without the "-D"[/quote]                   Re: SVN1723 (was SVN1714) will not run in 'daemon" mode on Solaris8, posted by Stefan Ritt on Wed Oct 11 08:18:14 2006  [quote="Steve Jones"]There are also strange system calls that differ, and I thought it might be due to the setuid(60001) -nobody- but the the non-daemn mode also sets to nobody and works fine.[/QUOTE]                      SVN1723-overiding logbook directory causes eLog to bomb when going into daemon mode (was SVN1714 will not run in 'daemon" mode on Solaris8), posted by Steve Jones on Thu Oct 26 21:54:40 2006  [quote="Stefan Ritt"][quote="Steve Jones"]There are also strange system calls that differ, and I thought it might be due to the setuid(60001) -nobody- but the the non-daemn mode also sets to nobody and works fine.[/QUOTE]                         SVN1723-overiding logbook directory causes eLog to bomb when going into daemon mode (was SVN1714 will not run in 'daemon" mode on Solaris8), posted by Stefan Ritt on Wed Nov 8 08:20:34 2006  [quote="Steve Jones"]BUG: In the initial comment section of elogd_fancy.cfg the line [CODE]# This [global] section contains settings common to all logbooks[/CODE] is not parsed correctly as a comment and the embedded [global] is picked up and confuses elogd, eg., elogd will not pickup the port=8080 option.  Taking "[global]" out of the comment restores fucntionality.  I recommend checking to make sure that the config file checking routine ignores *entire* lines starting                            SVN1723-overiding logbook directory causes eLog to bomb when going into daemon mode (was SVN1714 will not run in 'daemon" mode on Solaris8), posted by Steve Jones on Wed Nov 8 12:55:58 2006  [quote="Stefan Ritt"][quote="Steve Jones"]BUG: In the initial comment section of elogd_fancy.cfg the line [CODE]# This [global] section contains settings common to all logbooks[/CODE] is not parsed correctly as a comment and the embedded [global] is picked up and confuses elogd, eg., elogd will not pickup the port=8080 option.  Taking "[global]" out of the comment restores fucntionality.  I recommend checking to make sure that the config file checking routine                               SVN1723-overiding logbook directory causes eLog to bomb when going into daemon mode, posted by Stefan Ritt on Wed Nov 8 13:07:31 2006  [quote="Steve Jones"]Very weird. No, I did not try an absolute path - but I did notice the attempt to "cd /" in the truss output.  In fact, it was immediately after that "cd /" test that things appeared to start not working - basically, elogd could not find anything.[/quote]   Bug? Password file location changed, posted by David Spindler on Thu Nov 2 18:02:44 2006  I just tried to upgrade from 2.6.1-1633 to 2.6.2-1734. Whenever I tried to access the elog, it showed my password to be invalid. I tried this on 2 machines and same results. I did notice on the second one when I started it from a command prompt that it was creating a new empty password file in a different location.        Re: Bug? Password file location changed, posted by David Spindler on Thu Nov 2 18:10:07 2006  [quote="David Spindler"]I just tried to upgrade from 2.6.1-1633 to 2.6.2-1734. Whenever I tried to access the elog, it showed my password to be invalid. I tried this on 2 machines and same results. I did notice on the second one when I started it from a command prompt that it was creating a new empty password file in a different location.           Re: Bug? Password file location changed, posted by Steve Jones on Thu Nov 2 23:17:10 2006  [quote="David Spindler"][quote="David Spindler"]I just tried to upgrade from 2.6.1-1633 to 2.6.2-1734. Whenever I tried to access the elog, it showed my password to be invalid. I tried this on 2 machines and same results. I did notice on the second one when I started it from a command prompt that it was creating a new empty password file in a different location.              Re: Bug? Password file location changed, posted by David Spindler on Fri Nov 3 14:40:36 2006  [quote="Steve Jones"][quote="David Spindler"][quote="David Spindler"]I just tried to upgrade from 2.6.1-1633 to 2.6.2-1734. Whenever I tried to access the elog, it showed my password to be invalid. I tried this on 2 machines and same results. I did notice on the second one when I started it from a command prompt that it was creating a new empty password file in a different location.                 Re: Bug? Password file location changed, posted by Stefan Ritt on Tue Nov 7 09:22:52 2006  [quote="David Spindler"]Thanks. I checked the changelog and the documentation for any such changes but did not see them. I just looked again, and still do not see them. Anyway, I know what to expect, now, and will adjust. Again, thanks![/quote]   Push button for Menue Command, posted by An Thai on Fri Nov 3 15:53:44 2006  Dear Stefan, in your documentation: ELOG - Syntax of elog.cfg I see two screenshots in the Themes section. The left one shows a layout with Push buttons on the Menue       Re: Push button for Menue Command, posted by Stefan Ritt on Tue Nov 7 08:38:57 2006  [quote="An Thai"]Dear Stefan, in your documentation: ELOG - Syntax of elog.cfg I see two screenshots in the Themes section. The left one shows a layout with Push buttons on the Menue   XML, CSV and Raw export produces 'last' page only, posted by Brian Marshall on Mon Nov 6 17:41:13 2006  The Find command page provides an option, 'Display n entries per page' which is useful when the result of the search is to be viewed on-screen.   However this value is also applied to CSV, XML and Raw export and only the 'last' page of data is exported.       Re: XML, CSV and Raw export produces 'last' page only, posted by Stefan Ritt on Tue Nov 7 08:17:40 2006  [quote="Brian Marshall"]The Find command page provides an option, 'Display n entries per page' which is useful when the result of the search is to be viewed on-screen.     Spell check, posted by David Egolf on Mon Nov 6 17:13:19 2006  Sorry if this has been asked. Is there a spell check that can be implemented in Elog or any recommended add on spell check?        Re: Spell check, posted by Stefan Ritt on Mon Nov 6 17:18:04 2006  [quote="David Egolf"]Is there a spell check that can be implemented in Elog or any recommended add on spell check?  [/quote]       Re: Spell check, posted by Fergus Lynch on Mon Nov 6 17:36:35 2006  [quote="David Egolf"]Sorry if this has been asked. Is there a spell check that can be implemented in Elog or any recommended add on spell check?    Interesting behavior with $shell, posted by Steve Jones on Fri Oct 27 19:11:32 2006  eLog does not do math so I am trying to leverage the $SHELL function to perform the math.  I am using GAWK to perform the math -- I started trying to use CONDITIONAL ATTRIBUTES to assign numeric values to attributes but with loading up the ATTRIBUTES with all of the options brings elog to its knees in terms of performance -- the parsing of attributes is simply too string intensive.       Re: Interesting behavior with $shell, posted by Steve Jones on Sun Oct 29 16:04:05 2006  [quote="Steve Jones"]eLog does not do math so I am trying to leverage the $SHELL function to perform the math.  I am using GAWK to perform the math -- I started trying to use CONDITIONAL ATTRIBUTES to assign numeric values to attributes but with loading up the ATTRIBUTES with all of the options brings elog to its knees in terms of performance -- the parsing of attributes is simply too string intensive.   Error Sending Email, posted by Ibrahim Genc on Thu Oct 12 16:22:40 2006  I've set up all e-mail configuration but I get error message after submitting a message verbose output is as follows: every parameter I used works in outlook express.       Re: Error Sending Email, posted by Stefan Ritt on Thu Oct 12 16:34:07 2006  [quote="Ibrahim Genc"]I get error message after submitting a message[/quote] Your verbose output seems to be only partial. I have modified the verbose output recently, so please update to a more recent version of elog. With 2.6.2-3          Re: Error Sending Email, posted by Ibrahim Genc on Thu Oct 12 17:42:37 2006  [quote="Stefan Ritt"][quote="Ibrahim Genc"]I get error message after submitting a message[/quote] Your verbose output seems to be only partial. I have modified the verbose output recently, so please update to a more recent version of elog. With 2.6.2-3 I get for example          Re: Error Sending Email, posted by Ibrahim Genc on Fri Oct 13 23:17:05 2006  [quote="Stefan Ritt"][quote="Ibrahim Genc"]I get error message after submitting a message[/quote] Your verbose output seems to be only partial. I have modified the verbose output recently, so please update to a more recent version of elog. With 2.6.2-3             Re: Error Sending Email, posted by Stefan Ritt on Mon Oct 16 08:57:07 2006  [quote="Ibrahim Genc"]There is a free e-mail service at mail.softhome.net. It provides smtp and pop3 services. You can use this for testing if you want.[/quote] I tried but I was unable to obtain a free account. Furthermore, the problem is probably related to your SMTP server's authentication method. There are                Re: Error Sending Email, posted by An Thai on Wed Oct 25 17:20:27 2006  [quote="Stefan Ritt"][quote="Ibrahim Genc"]There is a free e-mail service at mail.softhome.net. It provides smtp and pop3 services. You can use this for testing if you want.[/quote]   Text column in the main list, posted by Alexandre Lindote on Fri Oct 20 13:26:10 2006  Hi,  is there a way of removing the "Text" column from the main listing of a logbook?       Re: Text column in the main list, posted by Stefan Ritt on Fri Oct 20 13:28:38 2006  [quote="Alexandre Lindote"]Is there a way of removing the "Text" column from the main listing of a logbook?  I have a logbook that works as a document database, and I don't even allow the entering of text... But the column insists on appearing! :) [/quote]          Re: Text column in the main list, posted by Alexandre Lindote on Fri Oct 20 13:36:29 2006  [quote="Stefan Ritt"][quote="Alexandre Lindote"]Is there a way of removing the "Text" column from the main listing of a logbook?  I have a logbook that works as a document database, and I don't even allow the entering of text... But the column insists on appearing! :) [/quote]   How to pass attachment names to an Execute line?, posted by Alexandre Lindote on Thu Oct 19 11:45:18 2006  Hi,  I'm trying to pass the name of an attachment in a  "Execute new " line, but I can't seem to get the correct syntax...       Re: How to pass attachment names to an Execute line?, posted by Stefan Ritt on Thu Oct 19 19:45:35 2006  [quote="Alexandre Lindote"]Hi,  I'm trying to pass the name of an attachment in a  "Execute new " line, but I can't seem to get the correct syntax...   Date format in Threaded display, posted by deletoille on Tue Oct 17 12:14:27 2006  hello,  I have a problem with the Date format in the Threaded display. The Date Format appears normally in the full and the summary displays but not in the threaded       Re: Date format in Threaded display, posted by Ibrahim Genc on Tue Oct 17 13:03:22 2006  [quote="deletoille"]hello,  Time format = %d/%m/%Y, %T          Re: Date format in Threaded display, posted by Stefan Ritt on Tue Oct 17 13:12:52 2006  That fix for Steve Jones was slightly different, it had to do with substitutions in threaded display. I fixed yours now in revision 1734, so give it a try. Salut,             Re: Date format in Threaded display, posted by deletoille on Thu Oct 19 12:26:16 2006  [quote="Stefan Ritt"]That fix for Steve Jones was slightly different, it had to do with substitutions in threaded display. I fixed yours now in revision 1734, so give it a try.                Re: Date format in Threaded display, posted by Stefan Ritt on Thu Oct 19 12:32:11 2006  [quote="deletoille"]I’ve tried on the last available release (revision 1732) and I have the same problem. You said in you previous message that: “I fixed yours now in revision 1734, so give it a try.” Could you tell me when this one will be available?[/quote]                   Re: Date format in Threaded display, posted by deletoille on Thu Oct 19 12:42:42 2006  [quote="Stefan Ritt"][quote="deletoille"]I’ve tried on the last available release (revision 1732) and I have the same problem. You said in you previous message that: “I fixed yours now in revision 1734, so give it a try.” Could you tell me when this one will be available?[/quote]   Email format, posted by Arckonit on Tue Oct 17 09:11:15 2006  Hi all,  Before all, i would say that ELOG is simply one of the best web-based program Simple and fast       Re: Email format, posted by Stefan Ritt on Tue Oct 17 09:14:41 2006  [quote="Arckonit"]I know the use "use email heading" and other, but i would like to configure the body of the mail, where there is the link, the name of the author, etc.[/quote]          Re: Email format, posted by Arckonit on Tue Oct 17 09:29:39 2006  Thanx for the quick answer Email format  = ? Where can i find some help to use this feature ?             Re: Email format, posted by Stefan Ritt on Tue Oct 17 09:32:21 2006  [quote="Arckonit"]Thanx for the quick answer Email format  = ? Where can i find some help to use this feature ?[/quote]                Re: Email format, posted by Arckonit on Tue Oct 17 09:35:01 2006  ;)I've searched, i don't understand but thanks ! "relis ton foutu manuel !"   Elog v2.6.2-1722 appears to have broken "Suppress default [0|1|2|3]" option on Windows XP box, posted by Gregory M. Caughey on Wed Oct 11 11:37:03 2006  Hi Stefan! Been running [B]Elog-2.6.2-1714[/B] successfully for a while and yesterday decided to download and experiment with the latest [B]Elog-2.6.2-1722[/B] build.       Re: Elog v2.6.2-1722 appears to have broken "Suppress default [0|1|2|3]" option on Windows XP box, posted by Stefan Ritt on Wed Oct 11 11:47:29 2006  [quote="Gregory M. Caughey"]2.) However, email notifications will be sent under all circumstances regardless of which parameter selected.[/quote] Thanks for reporting that problem. I just implemented [b]Suppress email on edit[/b] and this could have had some side effect. I tried however to reproduce          Re: Elog v2.6.2-1722 appears to have broken "Suppress default [0|1|2|3]" option on Windows XP box, posted by Gregory M. Caughey on Wed Oct 11 19:37:10 2006  [quote="Stefan Ritt"][quote="Gregory M. Caughey"]2.) However, email notifications will be sent under all circumstances regardless of which parameter selected.[/quote] Thanks for reporting that problem. I just implemented [b]Suppress email on edit[/b] and this could have had some side effect. I tried however to reproduce             Re: Elog v2.6.2-1722 appears to have broken "Suppress default [0|1|2|3]" option on Windows XP box, posted by Stefan Ritt on Fri Oct 13 16:59:13 2006  [quote="Gregory M. Caughey"]Hope this helps a little...[/quote] Yepp it helped. I could reproduce your problem and fix it. Can you try elog262-4.exe (Revision 1729)?                Re: Elog v2.6.2-1722 appears to have broken "Suppress default [0|1|2|3]" option on Windows XP box, posted by Gregory M. Caughey on Sat Oct 14 10:01:17 2006  [quote="Stefan Ritt"][quote="Gregory M. Caughey"]Hope this helps a little...[/quote] Yepp it helped. I could reproduce your problem and fix it. Can you try elog262-4.exe (Revision 1729)?[/quote]   Turn off smileys?, posted by Ben Shepherd on Thu Aug 24 11:12:18 2006  Can we please have an option to turn off the thing that changes smileys automatically into pictures? cheers       Re: Turn off smileys?, posted by Stefan Ritt on Tue Oct 10 09:00:08 2006  [quote="Ben Shepherd"]Can we please have an option to turn off the thing that changes smileys automatically into pictures?[/quote]          Re: Turn off smileys?, posted by Ben Shepherd on Tue Oct 10 11:13:16 2006  [quote="Stefan Ritt"] [LIST] [*] Submit your entry in plain mode (insted of ELCode)              Re: Turn off smileys?, posted by Stefan Ritt on Tue Oct 10 11:27:30 2006  [quote="Ben Shepherd"][quote="Stefan Ritt"] [LIST] [*] Submit your entry in plain mode (insted of ELCode)                 Re: Turn off smileys?, posted by Ben Shepherd on Tue Oct 10 11:36:13 2006  [quote="Stefan Ritt"] I agree that the [b]?)[/b] smiley is annoying, so I changed it to [b]\?-)[/b] which should prevent it from showing up in questions in brackets. I updated this server (you can see the effect above), the modification is committed to subversion.[/quote]                   Re: Turn off smileys?, posted by Stefan Ritt on Tue Oct 10 11:45:22 2006  [quote="Ben Shepherd"][quote="Stefan Ritt"] I agree that the [b]?)[/b] smiley is annoying, so I changed it to [b]\?-)[/b] which should prevent it from showing up in questions in brackets. I updated this server (you can see the effect above), the modification is committed to subversion.[/quote]                      Re: Turn off smileys?, posted by Yoshio Imai on Wed Oct 11 16:03:52 2006  [quote="Stefan Ritt"]Put a \ in front of anything which is turned into a smiley, so [B]\;)[/B] gets converted into ;), but [B]\\;)[/B] does not get converted[/quote] Other suggestion: What about going the other way round and making this [CODE]\?)[/CODE] the smiley and this [CODE]?)[/CODE] the usual question in brackets? If there was a special sequence to announce the unusual case (i.e. the smiley), I think less people would complain about having unwanted conversions ...                         Re: Turn off smileys?, posted by Stefan Ritt on Wed Oct 11 16:08:04 2006  [quote="Yoshio Imai"]Other suggestion: What about going the other way round and making this [CODE]\?)[/CODE] the smiley and this [CODE]?)[/CODE] the usual question in brackets? If there was a special sequence to announce the unusual case (i.e. the smiley), I think less people would complain about having unwanted conversions ...[/quote]   "Supress Email Notification" checkbox, posted by Steve Jones on Mon Sep 18 18:36:07 2006  Is there a way to allow email notification but have the "Suppress Email Notification" checked by default?  We had complaints about the enormous amount of email so I turned off email notification for edits/replys, but there are times that I would like to allow email to be sent out -- this would imply allowing email by unchecking the "Suppress" box.       Re: "Supress Email Notification" checkbox, posted by Steve Jones on Mon Sep 18 18:56:19 2006  [quote="Steve Jones"]Is there a way to allow email notification but have the "Suppress Email Notification" checked by default?  We had complaints about the enormous amount of email so I turned off email notification for edits/replys, but there are times that I would like to allow email to be sent out -- this would imply allowing email by unchecking the "Suppress" box.[/quote]          Re: "Supress Email Notification" checkbox, posted by Stefan Ritt on Fri Sep 22 07:50:39 2006  [quote="Steve Jones"][quote="Steve Jones"]Is there a way to allow email notification but have the "Suppress Email Notification" checked by default?  We had complaints about the enormous amount of email so I turned off email notification for edits/replys, but there are times that I would like to allow email to be sent out -- this would imply allowing email by unchecking the "Suppress" box.[/quote]             Re: "Supress Email Notification" checkbox, posted by Steve Jones on Fri Sep 22 19:42:21 2006  [quote="Stefan Ritt"][quote="Steve Jones"][quote="Steve Jones"]Is there a way to allow email notification but have the "Suppress Email Notification" checked by default?  We had complaints about the enormous amount of email so I turned off email notification for edits/replys, but there are times that I would like to allow email to be sent out -- this would imply allowing email by unchecking the "Suppress" box.[/quote]                Re: "Supress Email Notification" checkbox, posted by Stefan Ritt on Mon Oct 9 22:32:11 2006  [b]Suppress email on edit[/b] has been implemented in the current SVN revision just similar to the [b]Suppress default[/b] flag having possible values of 0, 1, 2 and 3.                   Re: "Supress Email Notification" checkbox, posted by Steve Jones on Tue Oct 10 23:27:41 2006  [quote="Stefan Ritt"][b]Suppress email on edit[/b] has been implemented in the current SVN revision just similar to the [b]Suppress default[/b] flag having possible values of 0, 1, 2 and 3.[/quote]   Re: 'Inline' button for attachments, posted by Stefan Ritt on Tue Oct 10 16:09:12 2006  [quote="Ben Shepherd"]Hi, It would be good if when you uploaded an image as an attachment, there was a button next to it that pasted the code [code][img]elog:1972/1[/img][/code]       Re: Re: 'Inline' button for attachments, posted by Ben Shepherd on Tue Oct 10 16:15:21 2006  [quote="Stefan Ritt"][quote="Ben Shepherd"]Hi, [IMG]elog:1973/1[/IMG] and it does exactly what you want.[/quote]   'Inline' button for attachments, posted by Ben Shepherd on Tue Oct 10 15:32:21 2006  Hi, It would be good if when you uploaded an image as an attachment, there was a button next to it that pasted the code [code][img]elog:1972/1[/img][/code]       Re: 'Inline' button for attachments, posted by Stefan Ritt on Tue Oct 10 16:09:12 2006  [quote="Ben Shepherd"]Hi, It would be good if when you uploaded an image as an attachment, there was a button next to it that pasted the code [code][img]elog:1972/1[/img][/code]          Re: Re: 'Inline' button for attachments, posted by Ben Shepherd on Tue Oct 10 16:15:21 2006  [quote="Stefan Ritt"][quote="Ben Shepherd"]Hi, [IMG]elog:1973/1[/IMG] and it does exactly what you want.[/quote]   Append option for elog.exe, posted by Ben Shepherd on Tue Aug 22 10:41:42 2006  Hi, Would it be possible to add an 'append' option to the elog.exe client program? I would like to be able to write a simple script for adding images into       Re: Append option for elog.exe, posted by Stefan Ritt on Tue Oct 10 08:56:49 2006  [quote="Ben Shepherd"]Hi, Would it be possible to add an 'append' option to the elog.exe client program? I would like to be able to write a simple script for adding images into          Re: Append option for elog.exe, posted by Ben Shepherd on Tue Oct 10 11:40:47 2006  [quote="Stefan Ritt"] Unfortunately it is not simple under Windows to extend the right-click functionality. What I do is to use a snapshot program (like [URL=http://www.hoverdesk.net/freeware.htm]HoverSnap[/URL]). Triggered with a definable hot key, it grabs a region of the screen and puts it into a GIF file. Then you can attach it to an elog. I agree it takes a             Re: Append option for elog.exe, posted by Stefan Ritt on Tue Oct 10 11:47:41 2006  [quote="Ben Shepherd"]I think you misunderstand me. I was asking whether it would be possible for the elog command-line client program to have an "append to existing entry" option.[/quote]                Re: Append option for elog.exe, posted by Ben Shepherd on Tue Oct 10 11:49:15 2006  [quote="Stefan Ritt"]The elog command-line program has a [B]-e[/B] switch to edit existing entries, but you need to know the ID of the entry.[/quote] Yes, but if you use -e "text" it replaces the whole entry with "text". So an append option would be really useful...   Conditional E-Mail Attributes, posted by Grant Jeffcote on Fri Aug 11 21:48:01 2006  Stefen, is it possible to change an email option using conditional attributes? I have a need under certain conditions to send an email in plain text (Encoding type 1) but as type 2 under other conditions, it seems when I do the conditional string is ignored and the global entry is used.        Re: Conditional E-Mail Attributes, posted by Stefan Ritt on Tue Aug 15 13:44:45 2006  Conditional attributes have been made working in email notifications sometime in version 2.6.0. You might have to upgrade to the recent version, but then it should work.          Re: Conditional E-Mail Attributes, posted by Grant Jeffcote on Fri Aug 18 14:22:07 2006  [quote="Stefan Ritt"]Conditional attributes have been made working in email notifications sometime in version 2.6.0. You might have to upgrade to the recent version, but then it should work.[/quote]             Re: Conditional E-Mail Attributes, posted by Stefan Ritt on Fri Aug 18 15:31:53 2006  If I try that little configuration file: [code][global]                Re: Conditional E-Mail Attributes, posted by Grant Jeffcote on Sat Aug 19 15:47:52 2006  [quote="Stefan Ritt"]If I try that little configuration file: [code][global]                   Re: Conditional E-Mail Attributes, posted by Stefan Ritt on Sat Aug 19 18:45:22 2006  [quote="Grant Jeffcote"][quote="Stefan Ritt"]If I try that little configuration file: [code][global]                      Re: Conditional E-Mail Attributes, posted by Grant Jeffcote on Sat Aug 19 20:12:42 2006  [quote="Stefan Ritt"][quote="Grant Jeffcote"][quote="Stefan Ritt"]If I try that little configuration file: [code][global]                         Re: Conditional E-Mail Attributes, posted by Stefan Ritt on Tue Oct 10 08:52:50 2006  [quote="Grant Jeffcote"]My version shows V2.6.2-1699. I noticed you have 1714, is that the latest binary or your compiled CVS release? [/quote]   a bug and a question, posted by mo on Wed Jul 10 22:19:47 2002     If you have only one entry in the logbook and have it set up in threaded  mode like: ?cmd=Search&mode=threaded&reverse=1, when you click on the icon  of the entry or the number of the entry to see it, it does not allow you        Re: a bug and a question, posted by Stefan Ritt on Thu Jul 11 10:36:09 2002  >    If you have only one entry in the logbook and have it set up in threaded  > mode like: ?cmd=Search&mode=threaded&reverse=1, when you click on the icon  > of the entry or the number of the entry to see it, it does not allow you    Entering information, posted by marta flood on Fri Sep 29 18:35:09 2006  I am not sure how to get to the page I need to log my clinical time for school and I have no idea how I got here Thanks, Marta   Entry Submission Help, posted by kcmin on Mon Aug 28 15:44:38 2006  I actually have two questions.   1.  When an entry is submitted is it possible to have it return to the submit page instead of a summary of the entry.  In the ELog.cfg syntax on the site       Re: Entry Submission Help, posted by Stefan Ritt on Mon Sep 25 21:09:58 2006  [quote="kcmin"]1.  When an entry is submitted is it possible to have it return to the submit page instead of a summary of the entry.  In the ELog.cfg syntax on the site it mentions something about this.  However It says something about a file being present in the resource directory.  I am not sure what to do here.[/quote]   Invalid addresses block email notifications, posted by Dimitrios Tsirigkas on Mon Sep 25 15:30:48 2006  Hi Stefan, We have had problems with some users who subscribe for elog notifications using fake email addresses. When this happens, e-mail notifications stop working       Re: Invalid addresses block email notifications, posted by Stefan Ritt on Mon Sep 25 18:23:54 2006  [quote="Dimitrios Tsirigkas"]Hi Stefan, We have had problems with some users who subscribe for elog notifications using fake email addresses. When this happens, e-mail notifications stop working   Shell execution generating error, posted by Steve Jones on Tue Sep 19 20:37:59 2006  When started as root *but not running as a daemon* shell execution results in the following errors that are sent to Standard Error: [code]       Re: Shell execution generating error, posted by Stefan Ritt on Fri Sep 22 07:42:57 2006  [quote="Steve Jones"]When started as root *but not running as a daemon* shell execution results in the following errors that are sent to Standard Error: [code]          Re: Shell execution generating error, posted by Steve Jones on Fri Sep 22 19:31:15 2006  [quote="Stefan Ritt"][quote="Steve Jones"]When started as root *but not running as a daemon* shell execution results in the following errors that are sent to Standard Error:   Attribute and checkbox, posted by Arno Teunisse on Sun Sep 3 21:57:00 2006  In the screen shots I see checkboxes before the attributes. How can I do that ?? In the doc I saw [B]Options <attribute> = boolean[/B]. But that creates a checkbox in the fill in form after the attribute. See second attached picture. The first attached picture shows what I want but I can only get the result in the second picture.  Can anybody help me in this one. ( Is there an [B]option       Re: Attribute and checkbox, posted by Arno Teunisse on Mon Sep 4 22:36:03 2006  In the screen shots I see checkboxes before the attributes. How can I do that ?? In the doc I saw Options  = boolean. But that creates a checkbox in the fill in form after the attribute. See second attached picture. The first attached picture shows what I want but I can only get the result in the second picture.  Can anybody help me in this one. ( Is there an option checked for the attributes ?   Just answer          Re: Attribute and checkbox, posted by Stefan Ritt on Fri Sep 22 08:55:22 2006  Well, what we use for such kind of check lists is the following: Use [b]Preset test = file.txt[/b] where [b]file.txt[/b] contains exactly the ASCII code you mentioned, like   Email substitution quit working, posted by David Spindler on Tue Aug 29 15:28:51 2006  I have recently upgraded from the 2.6.0-beta (I believe) to 2.6.2-1699. I just found out that on the day I upgraded, email substitution has stopped working. I have checked the discussion area and all the documentation and do not see any clues. The debug_log.txt file shows that the emails are being processed, but the fields are not being substituted correctly.       Re: Email substitution quit working, posted by David Spindler on Tue Sep 5 15:59:47 2006  [quote="David Spindler"]I have recently upgraded from the 2.6.0-beta (I believe) to 2.6.2-1699. I just found out that on the day I upgraded, email substitution has stopped working. I have checked the discussion area and all the documentation and do not see any clues. The debug_log.txt file shows that the emails are being processed, but the fields are not being substituted correctly.          Re: Email substitution quit working, posted by Stefan Ritt on Fri Sep 22 08:50:08 2006  [quote="David Spindler"][quote="David Spindler"]I have recently upgraded from the 2.6.0-beta (I believe) to 2.6.2-1699. I just found out that on the day I upgraded, email substitution has stopped working. I have checked the discussion area and all the documentation and do not see any clues. The debug_log.txt file shows that the emails are being processed, but the fields are not being substituted correctly.   Top Text and Bottom Text only show "text" --- no files, posted by Steve Jones on Thu Aug 31 21:46:15 2006  Just compiled 2.6.2-1714 and "Top text" and "Bottom text" interpret everything as "text" --- nothing is interpreted as a file to be included, unless there is a new syntax.       Re: Top Text and Bottom Text only show "text" --- no files, posted by Steve Jones on Tue Sep 5 19:46:05 2006  [quote="Steve Jones"]Just compiled 2.6.2-1714 and "Top text" and "Bottom text" interpret everything as "text" --- nothing is interpreted as a file to be included, unless there is a new syntax.[/quote]          Re: Top Text and Bottom Text only show "text" --- no files, posted by Steve Jones on Tue Sep 5 20:23:40 2006  [quote="Steve Jones"][quote="Steve Jones"]Just compiled 2.6.2-1714 and "Top text" and "Bottom text" interpret everything as "text" --- nothing is interpreted as a file to be included, unless there is a new syntax.[/quote]             Re: Top Text and Bottom Text only show "text" --- no files, posted by Stefan Ritt on Fri Sep 22 08:21:39 2006  [quote="Steve Jones"]Stefan, I found the source of the problem.  When you moved some files to "logbook_dir" you also told the code to look in "logbook_dir" for top and bottom text files. The documentation indicates that the location dir should be "resource_dir".[/quote]   new entry form - "minimalist" approach , posted by frederic poncin on Mon Sep 18 16:53:09 2006  I'm playing with the configuration files in order to produce a "minimal" form. At this time, I did not succeed in removing the following components:       Re: new entry form - "minimalist" approach , posted by Stefan Ritt on Fri Sep 22 07:54:58 2006  [quote="frederic poncin"]I'm playing with the configuration files in order to produce a "minimal" form. At this time, I did not succeed in removing the following components:   Re: Why are Preset fields blanked out?, posted by Stefan Ritt on Mon Sep 18 15:21:56 2006  [quote="Steve Jones"]The snippet of code below sets an attribute to a date depending on the selection.  Problem is, if attribute ApprovedDate was previously set, selecting any other value for CRStatus will blank out ApprovedDate (the same occurs for CompletedDate).  Why would this be occurring when the conditionals are mutually exclusive?        Re: Re: Why are Preset fields blanked out?, posted by Steve Jones on Mon Sep 18 18:19:44 2006  [quote="Stefan Ritt"][quote="Steve Jones"]The snippet of code below sets an attribute to a date depending on the selection.  Problem is, if attribute ApprovedDate was previously set, selecting any other value for CRStatus will blank out ApprovedDate (the same occurs for CompletedDate).  Why would this be occurring when the conditionals are mutually exclusive?           Re: Re: Why are Preset fields blanked out?, posted by Stefan Ritt on Tue Sep 19 17:32:28 2006  [quote="Steve Jones"] I think I found it.  Try this: [CODE]             Re: Re: Why are Preset fields blanked out?, posted by Steve Jones on Tue Sep 19 19:22:31 2006  [quote="Stefan Ritt"][quote="Steve Jones"] I think I found it.  Try this: [CODE]                Re: Re: Why are Preset fields blanked out?, posted by Stefan Ritt on Tue Sep 19 20:28:15 2006  [quote="Steve Jones"] Setting the "Type" to "date" causes the blanking to occur. [/QUOTE]                   Re: Re: Why are Preset fields blanked out?, posted by Steve Jones on Tue Sep 19 20:38:49 2006  [quote="Stefan Ritt"][quote="Steve Jones"] Setting the "Type" to "date" causes the blanking to occur. [/QUOTE]   Why are Preset fields blanked out?, posted by Steve Jones on Thu Sep 14 22:59:39 2006  The snippet of code below sets an attribute to a date depending on the selection.  Problem is, if attribute ApprovedDate was previously set, selecting any other value for CRStatus will blank out ApprovedDate (the same occurs for CompletedDate).  Why would this be occurring when the conditionals are mutually exclusive?        Re: Why are Preset fields blanked out?, posted by Stefan Ritt on Mon Sep 18 15:21:56 2006  [quote="Steve Jones"]The snippet of code below sets an attribute to a date depending on the selection.  Problem is, if attribute ApprovedDate was previously set, selecting any other value for CRStatus will blank out ApprovedDate (the same occurs for CompletedDate).  Why would this be occurring when the conditionals are mutually exclusive?           Re: Re: Why are Preset fields blanked out?, posted by Steve Jones on Mon Sep 18 18:19:44 2006  [quote="Stefan Ritt"][quote="Steve Jones"]The snippet of code below sets an attribute to a date depending on the selection.  Problem is, if attribute ApprovedDate was previously set, selecting any other value for CRStatus will blank out ApprovedDate (the same occurs for CompletedDate).  Why would this be occurring when the conditionals are mutually exclusive?              Re: Re: Why are Preset fields blanked out?, posted by Stefan Ritt on Tue Sep 19 17:32:28 2006  [quote="Steve Jones"] I think I found it.  Try this: [CODE]                Re: Re: Why are Preset fields blanked out?, posted by Steve Jones on Tue Sep 19 19:22:31 2006  [quote="Stefan Ritt"][quote="Steve Jones"] I think I found it.  Try this: [CODE]                   Re: Re: Why are Preset fields blanked out?, posted by Stefan Ritt on Tue Sep 19 20:28:15 2006  [quote="Steve Jones"] Setting the "Type" to "date" causes the blanking to occur. [/QUOTE]                      Re: Re: Why are Preset fields blanked out?, posted by Steve Jones on Tue Sep 19 20:38:49 2006  [quote="Stefan Ritt"][quote="Steve Jones"] Setting the "Type" to "date" causes the blanking to occur. [/QUOTE]   Unsubscribe from logbooks, posted by Chris Warner on Fri Sep 8 18:42:05 2006  Is there a way for user to unsubscribe from a logbook? Can a user delete their own account?       Re: Unsubscribe from logbooks, posted by Stefan Ritt on Mon Sep 11 17:25:54 2006  [quote="Chris Warner"]Is there a way for user to unsubscribe from a logbook? Can a user delete their own account?[/quote] Yes. Yes.   Auto-refresh ELog display, posted by Alan Stone on Thu Aug 24 15:52:54 2006  We have multiple LCDs at a console, and usually one is dedicated to displaying a browser with the local ELog.  Meanwhile, others are making entries from another machine.  If no one clicks on refresh, the ELog display becomes stale.  Is there a method to have       Re: Auto-refresh ELog display, posted by Steve Jones on Thu Aug 24 19:02:47 2006  Couldn't a small bit of javascript be added that would accomplish this? Me saying this and I have no idea what I am talking about!! [quote="Alan Stone"]We have multiple LCDs at a console, and usually one is dedicated to displaying a browser          Re: Auto-refresh ELog display, posted by Steve Jones on Thu Aug 24 19:28:35 2006  <html>          Re: Auto-refresh ELog display, posted by Alan Stone on Thu Aug 24 20:16:23 2006  I appreciate your posting of the JavaScript.  However, I have no idea what to do with it.  The page appears to be generated by some elog daemon.  I do not know how to hook into that.              Re: Auto-refresh ELog display, posted by Steve Jones on Fri Aug 25 05:27:13 2006  eLog allows one to add custom headers or footers as well as include Cascading Style Sheets.  I believe there is a post somewhere in here from Stefan indicating that javascript can be added through one of these methods . . . hold on, a simple search, yes Stefan mentions it at http://midas.psi.ch/elogs/Forum/1837       Re: Auto-refresh ELog display, posted by Stefan Ritt on Mon Sep 11 16:32:52 2006  [quote="Alan Stone"]We have multiple LCDs at a console, and usually one is dedicated to displaying a browser with the local ELog.  Meanwhile, others are making entries from another machine.  If no one clicks on refresh, the ELog display becomes stale.  Is there a method to have   elog perl script and the command prompt and eof, posted by Arno Teunisse on Thu Sep 7 22:06:00 2006  hello Just wrote a quick and dirty perl script ( See Attachment ) that let's you enter a record into the database. Put it into the directory where the config   reply option in elog client not working, posted by Gerald Ebberink on Tue Aug 22 11:31:11 2006  When I try to make a reply with the following command elog -v -h hostname -p 80 -l 'logbook wannabe' -u 'guess' 'what' -a 'Phase=During Measuring' -a Author='Gerald Ebberink' -a 'Subject=Octave measurements'       Re: reply option in elog client not working, posted by Gerald Ebberink on Wed Sep 6 12:02:52 2006  Today I found, I have the same problem with editing the log (with the -e option)          Re: reply option in elog client not working, posted by Gerald Ebberink on Thu Sep 7 08:01:37 2006  I have made patch witch solves the problem partialy. If there are not no attachments this patch works.... (But since I have attachments I'll have to dig in deeper in the code.             Re: reply option in elog client not working, posted by Gerald Ebberink on Thu Sep 7 17:17:17 2006  [quote="Gerald Ebberink"]I have made patch witch solves the problem partialy. If there are not no attachments this patch works.... (But since I have attachments I'll have to dig in deeper in the code.   Corrupt page link, posted by Ulrich Trüssel on Wed Jun 21 14:21:01 2006  If a loggbook contains more than one page of entries, above and under the list are links for changing the page by number (or privous / last and all) conatining links looking like "http://localhost:8080/logbook/page2?mode=mode". This is the correct link and will work until Version 2.6.1-5!       Re: Corrupt page link, posted by Stefan Ritt on Wed Jun 21 17:03:23 2006  [quote="Ulrich Trüssel"]If a loggbook contains more than one page of entries, above and under the list are links for changing the page by number (or privous / last and all) conatining links looking like "http://localhost:8080/logbook/page2?mode=mode". This is the correct link and will work until Version 2.6.1-5!       Re: Corrupt page link, posted by Arno Teunisse on Wed Jul 5 00:18:29 2006  [quote="Ulrich Trüssel"]If a loggbook contains more than one page of entries, above and under the list are links for changing the page by number (or privous / last and all) conatining links looking like "http://localhost:8080/logbook/page2?mode=mode". This is the correct link and will work until Version 2.6.1-5!          Re: Corrupt page link, posted by Stefan Ritt on Wed Jul 5 12:51:25 2006  [quote="Arno Teunisse"]Just installed the previous version : ==================================== [C:\Program Files\ELOG]elogd -c elogd.cfg             Re: Corrupt page link, posted by Arno Teunisse on Sun Sep 3 23:16:31 2006  [quote="Stefan Ritt"][quote="Arno Teunisse"]Just installed the previous version : ==================================== [C:\Program Files\ELOG]elogd -c elogd.cfg   Access to global configuration in v2.6.1, posted by Giorgio Croci Candiani on Thu Jan 19 15:02:38 2006  Hi, I just installed v.2.6.1 coming from the previous 2.6.0 (on Win2000) When I access the "configuration" function from a logbook, in the cfg page I only see two buttons in the header       Re: Access to global configuration in v2.6.1, posted by Stefan Ritt on Thu Jan 19 15:23:02 2006  > I just installed v.2.6.1 coming from the previous 2.6.0 (on Win2000) > When I access the "configuration" function from a logbook, in the cfg page I only see two buttons in the header > (save or cancel); in the previous version I saw more buttons there ("global config", "create new logbook" and so          Re: Access to global configuration in v2.6.1, posted by Giorgio Croci Candiani on Sat Jan 21 14:02:57 2006    > I tried to reproduce your problem, but could not. In my windows installation it looks fine. You only see the > (save and cancel) buttons only if you go to "Change [global]", otherwise you see the "Change [global]", "Delete          Re: Access to global configuration in v2.6.1, posted by Giorgio Croci Candiani on Wed Jan 25 01:08:06 2006  > > I just installed v.2.6.1 coming from the previous 2.6.0 (on Win2000) > > When I access the "configuration" function from a logbook, in the cfg page I only see two buttons in the header > > (save or cancel); in the previous version I saw more buttons there ("global config", "create new logbook" and so             Re: Access to global configuration in v2.6.1, posted by Stefan Ritt on Wed Jan 25 08:24:28 2006  > Here I am again... I built and installed v2.6.1 also on a different system, this time on linux; i tried both with the > existing cfg file and with the new cfg.                Re: Access to global configuration in v2.6.1, posted by Giorgio Croci Candiani on Wed Jan 25 12:08:13 2006  > I tried again, using the configuration file from the distribution (elog:1627/1). Hitting "config", I see the picture > attached (elog:1627/2). So it's a mystery why it is different in your case...                   Re: Access to global configuration in v2.6.1, posted by Stefan Ritt on Wed Jan 25 12:10:46 2006  > or maybe browser cookies.  That rings a bell. If you change user permissions (like password file/no password file/rename logbooks) you might be                      Re: Access to global configuration in v2.6.1, posted by Giorgio Croci Candiani on Tue Mar 14 17:11:10 2006  > > or maybe browser cookies.  >  > That rings a bell. If you change user permissions (like password file/no password file/rename logbooks) you might be                         Re: Access to global configuration in v2.6.1, posted by Giorgio Croci Candiani on Tue Aug 29 15:16:31 2006  Hi, after a long time, I thought I could try to investigate the code some further, and maybe I found some hint.   Cannot get email to work at all, configuation problem?, posted by Checker Anderson on Sun Aug 13 10:30:40 2006  I an new to elog and the only thing I cannot seem to configure correctly is my SMTP information. Here is a sample of my config file: SMTP host = checkeranderson.com       Re: Cannot get email to work at all, configuation problem?, posted by Stefan Ritt on Sun Aug 13 11:15:49 2006  [quote="Checker Anderson"]I an new to elog and the only thing I cannot seem to configure correctly is my SMTP information. Here is a sample of my config file:          Re: Cannot get email to work at all, configuation problem?, posted by Checker Anderson on Sun Aug 13 15:49:06 2006  Here is what I am seeing when I use the -v option. I do not recognize what is generating the error message, but pperhaps you will. Thanks. Email from checker@checkeranderson.com to checker@checkeranderson.com,checker@ch             Re: Cannot get email to work at all, configuation problem?, posted by Checker Anderson on Sun Aug 13 17:56:24 2006  Okay, I got it working but I had to change the authentication method of my mail server to Pop before SMTP.  I do not know why the username/password doesn't work - it does work with Outlook Express. I would rather use the username/password method, but atleast things are working now.                 Re: Cannot get email to work at all, configuation problem?, posted by Stefan Ritt on Tue Aug 15 13:25:00 2006  [quote="Checker Anderson"]Okay, I got it working but I had to change the authentication method of my mail server to Pop before SMTP.  I do not know why the username/password doesn't work - it does work with Outlook Express. I would rather use the username/password method, but atleast things are working now. [/quote]   Author in duplicate message, posted by Silvia Borghi on Mon Aug 14 11:45:32 2006  When I ask to duplicate a message, the author of the duplicated message is the one of the original message. How can I put as author the name of the person that is login? I tried to use the command  Preset on Duplicate Author  or Subst on Duplicate Author, but it does not work.       Re: Author in duplicate message, posted by Stefan Ritt on Tue Aug 15 13:10:30 2006  [quote="Silvia Borghi"]Preset on Duplicate Author = $long_name[/quote] This was not implemented so far, but is a good idea. So I put it into SVN revision 1713. You either get the SVN update or wait for the next release of   Substitutions in "Email all" do not work, posted by Ben Shepherd on Tue Aug 15 12:19:55 2006  Hi, I've got a logbook set up to report faults in an accelerator. It's set up so that when a fault is reported, there are options to specify which technical       Re: Substitutions in "Email all" do not work, posted by Stefan Ritt on Tue Aug 15 13:04:21 2006  [quote="Ben Shepherd"]Email All = $Cc[/quote] Substitution was not enabled for email addresses, but I added this for you. It's in SVN revision 1712 if you build elog yourself from the SVN, otherwise          Re: Substitutions in "Email all" do not work, posted by Ben Shepherd on Tue Aug 15 13:07:52 2006  [quote="Stefan Ritt"][quote="Ben Shepherd"]Email All = $Cc[/quote] Substitution was not enabled for email addresses, but I added this for you. It's in SVN revision 1712 if you build elog yourself from the SVN, otherwise             Re: Substitutions in "Email all" do not work, posted by Stefan Ritt on Tue Aug 15 13:09:18 2006  [quote="Ben Shepherd"][quote="Stefan Ritt"][quote="Ben Shepherd"]Email All = $Cc[/quote] Substitution was not enabled for email addresses, but I added this for you. It's in SVN revision 1712 if you build elog yourself from the SVN, otherwise   Retain original ELOG id when moving an entry to an archive weblog, posted by Fergus Lynch on Wed Aug 9 12:25:57 2006  Hi There, We have a number of weblogs where we regular archive off 'completed' entries to a separate archive weblog:       Re: Retain original ELOG id when moving an entry to an archive weblog, posted by Stefan Ritt on Wed Aug 9 19:40:42 2006  [quote="Fergus Lynch"]We have a number of weblogs where we regular archive off 'completed' entries to a separate archive weblog: Is it possible to retain the original ELOG id when moving an entry to an archive weblog, or have a locked field which holds the original id which we could   astonished icon, posted by Elaine Cristina Franchini dos Anjos on Fri Jul 14 21:47:14 2006  Hi Stefan, I've been trying to use the astonished icon, but the preview or entry       Re: astonished icon, posted by Stefan Ritt on Sat Jul 15 17:58:46 2006  [quote="Elaine Cristina Franchini dos Anjos"]Hi Stefan, I've been trying to use the astonished icon, but the preview or entry          Re: astonished icon, posted by Elaine Cristina Franchini dos Anjos on Wed Jul 19 15:05:02 2006  [quote="Stefan Ritt"][quote="Elaine Cristina Franchini dos Anjos"]Hi Stefan, I've been trying to use the astonished icon, but the preview or entry   Use Email From = <string>, posted by Dimitrios Tsirigkas on Wed Jul 19 12:20:34 2006  Hi all, My users have complained about the multiple "I'm away from xxx until xxx" automated replies that they get when they post an entry and notifications are       Re: Use Email From = <string>, posted by Stefan Ritt on Wed Jul 19 12:35:16 2006  [quote="Dimitrios Tsirigkas"]My users have complained about the multiple "I'm away from xxx until xxx" automated replies that they get when they post an entry and notifications are sent with their email in the "From" field.[/quote]          Re: Use Email From = <string>, posted by Dimitrios Tsirigkas on Wed Jul 19 12:47:58 2006  [quote="Stefan Ritt"]Sure. You override the default by setting the [b]Use Email From[/b]. In the forum I set it now to [b]Use Email From = noreply@psi.ch[/b] which is a nonexisting address. While now this is ok, our former email server did not accept this because the user [b]noreply[/b] does not exist at our institute. So you have to figure out if this works at CERN.[/quote]   Duplicate of a reply should be a reply, posted by Gerald Ebberink on Mon Jul 17 13:44:37 2006  Hello everybody This weekend I found that if I duplicate a reply it does not become a reply it self.       Re: Duplicate of a reply should be a reply, posted by Stefan Ritt on Mon Jul 17 13:49:37 2006  [quote="Gerald Ebberink"]Hello everybody This weekend I found that if I duplicate a reply it does not become a reply it self.   restrict access, posted by Gerald Ebberink on Wed Jun 21 22:11:15 2006  Dear all, I am trying to get elog used in our company but I need some help.       Re: restrict access, posted by Stefan Ritt on Thu Jun 22 08:04:13 2006  > -1- how can I restrict the access  > of a certain user such that he can only see certain logbooks.           Re: restrict access, posted by Gerald Ebberink on Thu Jun 22 11:29:17 2006  > > -1- how can I restrict the access  > > of a certain user such that he can only see certain logbooks.  >              Re: restrict access, posted by Stefan Ritt on Thu Jun 22 11:38:38 2006  > > You get a login page instead of the selection page if the "Password file = " statement is in the [global] section > > and "Protect selection page = 1". You might have to delete all cookies in your browser if you move the password                Re: restrict access, posted by Gerald Ebberink on Thu Jun 22 12:10:00 2006  > > > You get a login page instead of the selection page if the "Password file = " statement is in the [global] > section > > > and "Protect selection page = 1". You might have to delete all cookies in your browser if you move the password                   Re: restrict access, posted by Stefan Ritt on Fri Jun 23 12:29:30 2006  Even with your config file (I just changed the URL) I get the correct behaviour: [IMG]elog:1860/2[/IMG]                      Re: restrict access, posted by Gerald Ebberink on Fri Jun 23 13:16:57 2006  My full elogd.cfg is attached for your reference. I'm pretty sure that you did not delete your old cookies. Try from another computer. Make sure to have the most recent version of elog. Start the elogd                         Re: restrict access, posted by Stefan Ritt on Fri Jun 23 13:43:03 2006  [quote="Gerald Ebberink"]As you can see, I have implemented a temporary fix in the way of allowing only certain hosts access. But where does this Internal error come from.[/quote]                            Re: restrict access, posted by Gerald Ebberink on Fri Jun 23 14:57:02 2006  I only can identify this error if you send me your current ("de-sensified") elogd.cfg.[/quote] Here you are..                            Re: restrict access, posted by Gerald Ebberink on Mon Jul 17 13:20:07 2006  [quote="Stefan Ritt"][quote="Gerald Ebberink"]As you can see, I have implemented a temporary fix in the way of allowing only certain hosts access. But where does this Internal error come from.[/quote]   Inserting images via Internet Explorer, posted by Elaine Cristina Franchini dos Anjos on Fri Jun 2 21:20:06 2006  Hi Stefan, I observed that there is a difference between IE and others browsers.       Re: Inserting images via Internet Explorer, posted by Stefan Ritt on Thu Jul 13 15:16:53 2006  [quote="Elaine Cristina Franchini dos Anjos"]I observed that there is a difference between IE and others browsers. When I use "insert image" button in Netscape, for instance,  it creates automatically a tag like [CODE][IMG]elog:1/1[/IMG][/CODE] and          Re: Inserting images via Internet Explorer, posted by Elaine Cristina Franchini dos Anjos on Fri Jul 14 20:29:21 2006  [quote="Stefan Ritt"][quote="Elaine Cristina Franchini dos Anjos"]I observed that there is a difference between IE and others browsers. When I use "insert image" button in Netscape, for instance,  it creates automatically a tag like [CODE][IMG]elog:1/1[/IMG][/CODE] and   Elogd.exe crashes on windows, posted by Tim Fowler on Thu May 4 16:01:29 2006  I have elog setup to send emails based on the priority of one of the attributes. When a new entry is created, the emails are sent successfully, however if the entry is edited or if you changed the attribute, elogd.exe will crash with a memory access error.        Re: Elogd.exe crashes on windows, posted by Stefan Ritt on Thu Jul 13 15:25:44 2006  [quote="Tim Fowler"]I have elog setup to send emails based on the priority of one of the attributes. When a new entry is created, the emails are sent successfully, however if the entry is edited or if you changed the attribute, elogd.exe will crash with a memory access error.    Setting Subject for ELog email notification, posted by Alan Stone on Wed Jul 12 17:52:45 2006  Hi, I have the following elogd.cfg syntax:       Re: Setting Subject for ELog email notification, posted by Stefan Ritt on Thu Jul 13 08:11:33 2006  [quote="Alan Stone"]Hi, I have the following elogd.cfg syntax:   Can´t run command "make" in OSX, posted by Mats McLund on Fri Jun 30 13:35:03 2006  Hello. I think to test Elog in Mac G5 with OSX 10.4.6.       Re: Can´t run command "make" in OSX, posted by Steve Jones on Tue Jul 4 07:04:19 2006  [quote="Mats McLund"]Hello. I think to test Elog in Mac G5 with OSX 10.4.6.          Re: Can´t run command "make" in OSX, posted by Mats McLund on Tue Jul 4 08:46:15 2006  [quote="Steve Jones"][quote="Mats McLund"]Hello. I think to test Elog in Mac G5 with OSX 10.4.6.             Re: Can´t run command "make" in OSX, posted by Gerald Ebberink on Tue Jul 4 08:52:47 2006  [quote="Mats McLund"] But....                Re: Can´t run command "make" in OSX, posted by Mats McLund on Tue Jul 4 13:07:53 2006  [quote="Gerald Ebberink"][quote="Mats McLund"] But....                   Re: Can´t run command "make" in OSX, posted by Gerald Ebberink on Mon Jul 10 11:14:12 2006  [quote="Mats McLund"] Hello Gerald.                      Re: Can´t run command "make" in OSX, posted by Stefan Ritt on Mon Jul 10 11:15:25 2006  [quote="Gerald Ebberink"]This sounds like something I have not encountered, so I think you'll need to wait for Mr. Ritt to solve this.[/quote] No, I can't solve this becaue I have no MAC.   Losing field 'focus' when using Conditional Attributes, posted by Steve Jones on Tue May 30 17:54:21 2006  Stefan, any way to address this?  It appears to only be applicable when one defines conditional Options - when javascript updates the conditional lists the input focus appears to shift to the HTML edit area.  I am still running ELOG V2.6.1-1681 and this is under Windows (my test system).       Re: Losing field 'focus' when using Conditional Attributes, posted by Steve Jones on Tue May 30 17:57:46 2006  [quote="Steve Jones"]Stefan, any way to address this?  It appears to only be applicable when one defines conditional Options - when javascript updates the conditional lists the input focus appears to shift to the HTML edit area.  I am still running ELOG V2.6.1-1681 and this is under Windows (my test system).          Re: Losing field 'focus' when using Conditional Attributes, posted by Stefan Ritt on Tue Jun 13 08:51:38 2006  [quote="Steve Jones"]It appears to only be applicable when one defines conditional Options - when javascript updates the conditional lists the input focus appears to shift to the HTML edit area.  I am still running ELOG V2.6.1-1681 and this is under Windows (my test system).[/quote]             Re: Losing field 'focus' when using Conditional Attributes, posted by Steve Jones on Fri Jun 23 19:24:12 2006  [quote="Stefan Ritt"][quote="Steve Jones"]It appears to only be applicable when one defines conditional Options - when javascript updates the conditional lists the input focus appears to shift to the HTML edit area.  I am still running ELOG V2.6.1-1681 and this is under Windows (my test system).[/quote]   Hosts Allow and Password File, posted by Jeremy Perkins on Wed Jun 21 18:36:06 2006  I'm trying to set up an elog that uses a password file using the "Password file = /blah" directive as well as the "Hosts allow = myhost.mydomain" directive.  I used the -v command and watched the messages and elogd is recognizing that I am connecting from an allowed host but the login page is still appearing.  Is there a way to use both of these?       Re: Hosts Allow and Password File, posted by Stefan Ritt on Thu Jun 22 08:09:11 2006  [quote="Jeremy Perkins"]I'm trying to set up an elog that uses a password file using the "Password file = /blah" directive as well as the "Hosts allow = myhost.mydomain" directive.  I used the -v command and watched the messages and elogd is recognizing that I am connecting from an allowed host but the login page is still appearing.  Is there a way to use both of these?[/quote]   'Click through' order of elog enteries, posted by Fergus Lynch on Mon Jun 5 14:19:52 2006  Hi There, When you find a set of records in ELOG and then 'click through' the returned list it runs through then in order of ID. - I s there a way to modify this       Re: 'Click through' order of elog enteries, posted by Stefan Ritt on Tue Jun 6 16:20:42 2006  [quote="Fergus Lynch"]Hi There, When you find a set of records in ELOG and then 'click through' the returned list it runs through then in order of ID. - I s there a way to modify this   Display legal banner, posted by Ed To on Wed May 24 08:22:36 2006  Hi, I read somewhere that javascript is supported with elog. For legal reasons, I have to post a legal banner before the login prompt. Can you tell me how       Re: Display legal banner, posted by Stefan Ritt on Wed May 24 09:00:34 2006  [quote="Ed To"]I read somewhere that javascript is supported with elog. For legal reasons, I have to post a legal banner before the login prompt. Can you tell me how to do this? I'm not a programmer, but I guess I could use the javascript alert command to do this. What file would I need to change?[/quote]          Re: Display legal banner, posted by Ed To on Wed May 24 18:09:51 2006  [quote="Stefan Ritt"][quote="Ed To"]I read somewhere that javascript is supported with elog. For legal reasons, I have to post a legal banner before the login prompt. Can you tell me how to do this? I'm not a programmer, but I guess I could use the javascript alert command to do this. What file would I need to change?[/quote]             Re: Display legal banner, posted by Ed To on Thu May 25 02:28:27 2006  Stefan, Thanks again. I got it to display my legal banner.   $datetime display, posted by Fergus Lynch on Fri May 19 12:10:54 2006  Apologies for being so dense but try as I might I cannot get the $datetime display to show only Day, Month , Year,hour and minutes, [B]NOT[/B] seconds. I dont nee the seconds display!       Re: Re: $datetime display, posted by Stefan Ritt on Fri May 19 12:19:38 2006  [quote="Fergus Lynch"]Apologies for being so dense but try as I might I cannot get the $datetime display to show only Day, Month , Year,hour and minutes, [B]NOT[/B] seconds.          Re: Re: $datetime display, posted by Fergus Lynch on Fri May 19 14:01:34 2006  [quote="Stefan Ritt"][quote="Fergus Lynch"]Apologies for being so dense but try as I might I cannot get the $datetime display to show only Day, Month , Year,hour and minutes, [B]NOT[/B] seconds.             Re: Re: $datetime display, posted by Stefan Ritt on Sat May 20 09:48:52 2006  [quote="Fergus Lynch"][quote="Stefan Ritt"][quote="Fergus Lynch"]Apologies for being so dense but try as I might I cannot get the $datetime display to show only Day, Month , Year,hour and minutes, [B]NOT[/B] seconds.                Re: Re: $datetime display, posted by Fergus Lynch on Mon May 22 10:37:36 2006  [quote="Stefan Ritt"][quote="Fergus Lynch"][quote="Stefan Ritt"][quote="Fergus Lynch"]Apologies for being so dense but try as I might I cannot get the $datetime display to show only Day, Month , Year,hour and minutes, [B]NOT[/B] seconds.   Linking two sets of logbooks, posted by Alan Stone on Wed May 17 23:39:23 2006  I would like to link the CMSROC ELOG at Fermilab: http://nippon.fnal.gov:8081/ with the CMS ELOG at CERN:       Re: Linking two sets of logbooks, posted by Stefan Ritt on Thu May 18 08:08:25 2006  [quote="Alan Stone"]I would like to link the CMSROC ELOG at Fermilab: http://nippon.fnal.gov:8081/ with the CMS ELOG at CERN:   Email notification question, posted by Kevin McCarty on Wed May 10 16:14:00 2006  Hello, I've just set up an ELog server for my research group.  (Running on Debian, package version 2.6.1+r1642-1)       Re: Email notification question, posted by Stefan Ritt on Wed May 10 16:16:33 2006  [quote="Kevin McCarty"]Hello, I've just set up an ELog server for my research group.  (Running on Debian, package version 2.6.1+r1642-1)          Re: Email notification question, posted by Kevin McCarty on Wed May 10 16:55:28 2006  [quote="Stefan Ritt"][quote="Kevin McCarty"]Hello, I've just set up an ELog server for my research group.  (Running on Debian, package version 2.6.1+r1642-1)   Feature request - site-specific ELCode markup definitions, posted by Kevin McCarty on Wed May 10 16:30:45 2006  Hi, Here's a suggestion that you may or may not want to apply.  It would be nice if there existed a config file (or a syntax in the existing elog.cfg file)   Spec file change, posted by Stephen A. Wood on Mon May 8 18:23:17 2006  Could the "Copyright:" line in the elog.spec file be changed to "License:" for the next release?  Without this change an RPM can't be built on FC4 (RPM 4.4.1).  With the change, rpms can still be built in Enterprise linux 3 (RPM 4.2.3).       Re: Spec file change, posted by Stefan Ritt on Tue May 9 08:07:00 2006  [quote="Stephen A. Wood"]Could the "Copyright:" line in the elog.spec file be changed to "License:" for the next release?  Without this change an RPM can't be built on FC4 (RPM 4.4.1).  With the change, rpms can still be built in Enterprise linux 3 (RPM 4.2.3).[/quote]   Date automatically generated by another one, posted by Alex H on Thu May 4 17:26:41 2006  Hi Stefan, I am searching for a solution in order to have a date automatically generated by another one.       Re: Date automatically generated by another one, posted by Stefan Ritt on Fri May 5 07:58:53 2006  [quote="Alex H"]Hi Stefan, I am searching for a solution in order to have a date automatically generated by another one.          Re: Date automatically generated by another one, posted by Alex H on Fri May 5 09:01:04 2006  [quote="Stefan Ritt"][quote="Alex H"]Hi Stefan, I am searching for a solution in order to have a date automatically generated by another one.   allow per-logfile attributes to be added/subtracted from the global settings, posted by Mark Bergman on Wed May 3 00:16:42 2006  I think it would be a big enhancement to allow per-logbook attributes to be additions or subtractions from the global attributes, rather than replacing the global settings.       Re: allow per-logfile attributes to be added/subtracted from the global settings, posted by Stefan Ritt on Wed May 3 08:28:05 2006  [quote="Mark Bergman"]I think it would be a big enhancement to allow per-logbook attributes to be additions or subtractions from the global attributes, rather than replacing the global settings.[/quote]   Any way to move Replies from one logentry to another?, posted by Steve Jones on Fri Apr 14 16:30:56 2006  Is there anyway to reattach a reply within a logbook from one logentry to another?  I guess it would be "re-associate"?       Re: Any way to move Replies from one logentry to another?, posted by Stefan Ritt on Tue Apr 18 10:01:23 2006  [quote="Steve Jones"]Is there anyway to reattach a reply within a logbook from one logentry to another?  I guess it would be "re-associate"?[/quote] No, this is not possible directly. You would have to make a new reply, and manually fill in the contents from the original reply. It is however possible          Re: Any way to move Replies from one logentry to another?, posted by Steve Jones on Wed Apr 19 04:48:43 2006  [quote="Stefan Ritt"][quote="Steve Jones"]Is there anyway to reattach a reply within a logbook from one logentry to another?  I guess it would be "re-associate"?[/quote] No, this is not possible directly. You would have to make a new reply, and manually fill in the contents from the original reply. It is however possible   User review..use case: implementing GTD, posted by Marco Calf on Sat Apr 15 00:37:48 2006  Playing with elog for a day made me very happy. I was looking for a webbased thingy to support list building for 'Getting Things Done' by David Allen ( [URL=http://www.davidco.com/]David Allen's Getting Things Done[/URL] ). Elog is simple, intuitative and very powerfull!    Text Field color in Summary display, posted by Mike Jackson on Fri Apr 14 17:01:40 2006  Is it possible to have the text field be the same color as the other attributes in the summary display?  What I mean is how each line is a different color, but the text field is always white.  I would like the text field to match the rest.  I changed the .summary in the css file but it changes all the text fields, it doesn't allow them to alternate colors like the other fields on the summary display   Can a field value be calculated during display?, posted by Sridhar Anandakrishnan on Wed Apr 12 19:22:34 2006  I have a logbook which is a Calendar/Appointment book with Attributes: "Appointment DateTime", Place, etc. I would like another Attribute called "When" whose value is calculated from Today's Date - Appointment date (so for example I could display today's appointments       Re: Can a field value be calculated during display?, posted by Stefan Ritt on Thu Apr 13 09:07:24 2006  [quote="Sridhar Anandakrishnan"]I have a logbook which is a Calendar/Appointment book with Attributes: "Appointment DateTime", Place, etc. I would like another Attribute called "When" whose value is calculated from Today's Date - Appointment date (so for example I could display today's appointments   Problem with the "Forgot password?" option, posted by Hagelstein, Kay on Tue Apr 11 08:09:56 2006  Hi, I have a Problem with the "Forgot password?" option it doesn’t work with the “Top Group” option and the “Protect Selection page” option.   elog client authentication and attachment comment, posted by Yoshio Imai on Thu Apr 6 20:24:06 2006  Hi again! I have two questions, one concerning authentication methods for the elog client. Until revision 1642, it was possible to submit entries to a password-protected       Re: elog client authentication and attachment comment, posted by Stefan Ritt on Fri Apr 7 10:29:49 2006  [quote="Yoshio Imai"]Until revision 1642, it was possible to submit entries to a password-protected logbook using the elog client without supplying authentication information. With revision 1671 this is no longer possible. In principle this is good. However, many of our run control programs use the elog client (via [i]rsh[/i] to the elog server computer) to submit automatic entries, which fails now. In order for this mechanism to work again, we would have to change          Re: elog client authentication and attachment comment, posted by Yoshio Imai on Mon Apr 10 20:08:02 2006  [quote="Stefan Ritt"]We could save the username/password in a file on the server, which is maybe readable only by the owner.[/quote] I have discussed it with the others, and it sounds like a good idea. There is only the debate whether it should be readable by the owner or by the root user of the elog server. I can't tell at the moment which is more favourable ...   TIMEZONE modifier?, posted by Steve Jones on Mon Apr 10 05:34:40 2006  We host eLog for a number of global sites.  Our logbooks use datetime attributes but the timezones are wrong attributes that are either preset (like when a logentry is created) or if we fill in an attribute from an action (like when a logentry is closed).  Any possibility of adding a timezone designator to FORMAT or does one already exist?   elogd 2.6.1 program Crash is repeatable under Windows, posted by Steve Jones on Tue Mar 14 17:51:52 2006  Stefan, I have previously reported that elog crashes with a specific URL -- I have now re-created the crash running under WindowsXP Pro using the pre-packaged Windows installation that I just downloaded.  I am attaching screenshots, etc. for your information but I think the source of the problem stems from using "Top Group".  I hope that you are able to look into this as I have logged other issues that i believe are specifically related to the use of the Top Group       Re: elogd 2.6.1 program Crash is repeatable under Windows, posted by Stefan Ritt on Wed Mar 15 09:28:42 2006  [quote="Steve Jones"]Stefan, I have previously reported that elog crashes with a specific URL -- I have now re-created the crash running under WindowsXP Pro using the pre-packaged Windows installation that I just downloaded.  I am attaching screenshots, etc. for your information but I think the source of the problem stems from using "Top Group".  I hope that you are able to look into this as I have logged other issues that i believe are specifically related          Re: elogd 2.6.1 program Crash is repeatable under Windows, posted by Steve Jones on Wed Mar 15 21:42:25 2006  [quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Stefan, I have previously reported that elog crashes with a specific URL -- I have now re-created the crash running under WindowsXP Pro using the pre-packaged Windows installation that I just downloaded.  I am attaching screenshots, etc. for your information but I think the source of the problem stems from using "Top Group".  I hope that you are able to look into this as I have logged other issues that i believe             Re: elogd 2.6.1 program Crash is repeatable under Windows, posted by Steve Jones on Wed Mar 15 23:46:54 2006  [quote="Steve Jones"][quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Stefan, I have previously reported that elog crashes with a specific URL -- I have now re-created the crash running under WindowsXP Pro using the pre-packaged Windows installation that I just downloaded.  I am attaching screenshots, etc. for your information but I think the source of the problem stems from using "Top Group".  I hope that you are able to look into this                Re: elogd 2.6.1 program Crash is repeatable under Windows, posted by Steve Jones on Tue Mar 21 00:05:43 2006  [quote="Steve Jones"][quote="Steve Jones"][quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Stefan, I have previously reported that elog crashes with a specific URL -- I have now re-created the crash running under WindowsXP Pro using the pre-packaged Windows installation that I just downloaded.  I am attaching screenshots, etc. for your information but I think the source of the problem stems from using "Top Group".  I hope that you are able to                   Re: elogd 2.6.1 program Crash is repeatable under Windows, posted by Stefan Ritt on Mon Apr 3 17:09:19 2006  [quote="Steve Jones"]BTW, Stefan, unless you can make the most recent version of a Windows eLog available I cannot test the most recent -- I do not have access to a Windows development environment.  Solaris-Yes, Linux-Yes, Windoze-No.[/QUOTE]                      Re: elogd 2.6.1 program Crash is repeatable under Windows, posted by Steve Jones on Fri Apr 7 05:07:20 2006  [quote="Stefan Ritt"][quote="Steve Jones"]BTW, Stefan, unless you can make the most recent version of a Windows eLog available I cannot test the most recent -- I do not have access to a Windows development environment.  Solaris-Yes, Linux-Yes, Windoze-No.[/QUOTE]   Triggering $shell question, posted by Steve Jones on Wed Apr 5 20:25:42 2006  Should this work?  rev1684 now allows $shell to pass attribute contents to the shell command and whenever a new entry is submitted or when one Edits/Replys the Subst is triggered, but I would like to be able to trigger this whenever a new value in the options pulldown is selected (assume Risk2 and Risk3 are identical to Risk1).  Being able to trigger a regular Preset works fine (like {1} preset Date = $date ) but I would like to trigger the Subst.  Maybe a       Re: Triggering Re: Triggering $shell question, posted by Steve Jones on Wed Apr 5 22:48:49 2006  [quote="Steve Jones"]Should this work?  rev1684 now allows $shell to pass attribute contents to the shell command and whenever a new entry is submitted or when one Edits/Replys the Subst is triggered, but I would like to be able to trigger this whenever a new value in the options pulldown is selected (assume Risk2 and Risk3 are identical to Risk1).  Being able to trigger a regular Preset works fine (like {1} preset Date = $date ) but I would like to trigger   Simple math within an elog form, posted by Steve Jones on Tue Apr 4 06:18:18 2006  This may sound a little strange but I am trying to determine if it is possible to create a series of attributes that may be assigned an integer value via OPTIONS, and then take the selected values and perform some simple math and display the result.  For example:       Re: Simple math within an elog form, posted by Stefan Ritt on Tue Apr 4 08:15:29 2006  [quote="Steve Jones"]This may sound a little strange but I am trying to determine if it is possible to create a series of attributes that may be assigned an integer value via OPTIONS, and then take the selected values and perform some simple math and display the result. [/quote]          Re: Simple math within an elog form, posted by Steve Jones on Wed Apr 5 00:00:14 2006  [quote="Stefan Ritt"][quote="Steve Jones"]This may sound a little strange but I am trying to determine if it is possible to create a series of attributes that may be assigned an integer value via OPTIONS, and then take the selected values and perform some simple math and display the result. [/quote]             Re: Simple math within an elog form, posted by Stefan Ritt on Wed Apr 5 10:07:59 2006  [quote="Steve Jones"] [code] Subst TotalRisk = $shell(echo $Risk1 + $Risk2 + $Risk3 > /tmp/elog_out)                Re: Simple math within an elog form, posted by Steve Jones on Wed Apr 5 13:50:14 2006  [quote="Stefan Ritt"][quote="Steve Jones"] [code] Subst TotalRisk = $shell(echo $Risk1 + $Risk2 + $Risk3 > /tmp/elog_out)                   Re: Simple math within an elog form, posted by Steve Jones on Wed Apr 5 18:56:48 2006  [quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"] [code] Subst TotalRisk = $shell(echo $Risk1 + $Risk2 + $Risk3 > /tmp/elog_out)   Change in encoding close entry, posted by Holger Mundhahs on Mon Apr 3 10:32:45 2006  Maybe it is a wrong configuration, because in this forum it works well. If I change the encoding in the logbook entry I get "Submit modified ELOG entry?", and after clicking OK the entry is closed. Because this behavior is on all loggbooks       Re: Change in encoding close entry, posted by Stefan Ritt on Mon Apr 3 10:35:37 2006  > Maybe it is a wrong configuration, because in this forum it works well. > If I change the encoding in the logbook entry I get "Submit modified ELOG entry?", > and after clicking OK the entry is closed. Because this behavior is on all loggbooks          Re: Change in encoding close entry, posted by Holger Mundhahs on Mon Apr 3 10:48:45 2006  > > Maybe it is a wrong configuration, because in this forum it works well. > > If I change the encoding in the logbook entry I get "Submit modified ELOG entry?", > > and after clicking OK the entry is closed. Because this behavior is on all loggbooks             Re: Change in encoding close entry, posted by Stefan Ritt on Tue Apr 4 20:45:28 2006  > So if I switch the encoding the whole entry is reloaded, and the JS take it as leaving. > Is it possible to change this behavior? Changing encoding should be handled different as > "regular" leaving.   Numerous questions that I am hoping to get a response on, posted by Steve Jones on Mon Apr 3 16:31:37 2006  Stefan, I have several issues/questions that I am still hoping to get an answer on.  Any chance?  If you would rather you can send email to me directly. Thanks       Re: Numerous questions that I am hoping to get a response on, posted by Stefan Ritt on Mon Apr 3 16:32:52 2006  [quote="Steve Jones"]Stefan, I have several issues/questions that I am still hoping to get an answer on.  Any chance?  If you would rather you can send email to me directly.[/quote]          Re: Numerous questions that I am hoping to get a response on, posted by Steve Jones on Mon Apr 3 16:39:33 2006  [quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Stefan, I have several issues/questions that I am still hoping to get an answer on.  Any chance?  If you would rather you can send email to me directly.[/quote]   Anonymous vs user posts, posted by Chris Warner on Fri Mar 31 22:14:38 2006  If I have a logbook that will let both registered users Anonymous users post. I would like the author attribute to default to the value in $long_name but if the post is Anonymous display a default text string "Anonymous". Is it possible to do this?        Re: Anonymous vs user posts, posted by Stefan Ritt on Sat Apr 1 15:30:32 2006  [quote="Chris Warner"]If I have a logbook that will let both registered users Anonymous users post. I would like the author attribute to default to the value in $long_name but if the post is Anonymous display a default text string "Anonymous". Is it possible to do this? [/quote]   implement 'hide attribute' and 'sort attribute', posted by Heiko Scheit on Thu Dec 2 14:39:50 2004  Could you implement a 'hide attribute' and 'sort attribute' config option? While sort is probably not so easy to do the hide option would already  be very useful.  What I want to do is to use elog to collect bibtex entries       Re: implement 'hide attribute' and 'sort attribute', posted by Stefan Ritt on Thu Jan 6 11:25:54 2005  > Could you implement a 'hide attribute' and 'sort attribute' config option? I implemented it as 'hidden attributes = <list>' and 'sort attributes'.          Re: implement 'hide attribute' and 'sort attribute', posted by Heiko Scheit on Mon Jan 10 19:44:16 2005  > > Could you implement a 'hide attribute' and 'sort attribute' config option? >  > I implemented it as 'hidden attributes = <list>' and 'sort attributes'.             Re: implement 'hide attribute' and 'sort attribute', posted by Stefan Ritt on Mon Jan 10 20:23:35 2005  > 'sort attributes' sorts the logbook entries when they are displayed.  Or? Right                Re: implement 'hide attribute' and 'sort attribute', posted by Heiko Scheit on Mon Jan 10 20:52:13 2005  > > 'sort attributes' sorts the logbook entries when they are displayed.  Or? >  > Right                   Re: implement 'hide attribute' and 'sort attribute', posted by Stefan Ritt on Tue Jan 11 12:55:35 2005  > Only the sorting (of the entry mask!) is missing! :) Ok, I put that on my wish list. So once the second or third person asks for it, I will                      Re: implement 'hide attribute' and 'sort attribute', posted by Lars Jorgensen on Thu Mar 23 14:49:07 2006  > > Only the sorting (of the entry mask!) is missing! :) >  > Ok, I put that on my wish list. So once the second or third person asks for it, I will                         Re: implement 'hide attribute' and 'sort attribute', posted by Steve Jones on Thu Mar 23 21:52:03 2006  > > > Only the sorting (of the entry mask!) is missing! :) > >  > > Ok, I put that on my wish list. So once the second or third person asks for it, I will   Inline images URL not working, posted by Alexandre Gauthier on Wed Mar 1 19:51:05 2006  Hello I'm running elog on the blackdog embedded device so I can carry it around while doing my consultant work.       Re: Inline images URL not working, posted by Stefan Ritt on Thu Mar 2 07:15:27 2006  [quote="Alexandre Gauthier"]Whenever I try to insert an inline picture by using the [code]\elog:1741/1[/code] paths with ELCode, the link becomes "logbookname2/1" (Where logbookname is the name of my logbook) and hence, doesn't work. I recall that it worked once. The image did not display, but the URL seemed correct...[/quote]          Re: Re: Inline images URL not working, posted by Alexandre Gauthier on Thu Mar 2 14:35:54 2006  [quote="Stefan Ritt"][quote="Alexandre Gauthier"]Whenever I try to insert an inline picture by using the [code]\elog:1741/1[/code] paths with ELCode, the link becomes "logbookname2/1" (Where logbookname is the name of my logbook) and hence, doesn't work. I recall that it worked once. The image did not display, but the URL seemed correct...[/quote]             Broken thread structure in Forum?, posted by Yoshio Imai on Mon Mar 13 12:51:36 2006  Hi! I noticed that this thread seems to be broken in the Forum. When I view the thread start in single view (http://midas.psi.ch/elogs/Forum/1739), I have                Broken thread structure in Forum?, posted by Stefan Ritt on Mon Mar 13 12:57:33 2006  [quote="Yoshio Imai"]I noticed that this thread seems to be broken in the Forum. When I view the thread start in single view (http://midas.psi.ch/elogs/Forum/1739), I have access to all subsequent posts, but the first reply seems to be interpreted like a new thread, i.e. when clicking onto it (http://midas.psi.ch/elogs/Forum/1741), the thread start is no longer displayed and accessible in the list of posts. Is this intentional, or is it a bug?[/quote]                   Broken thread structure in Forum?, posted by Yoshio Imai on Mon Mar 13 13:19:09 2006  [quote=Stefan Ritt] I have no clue how this could have happened, but I fixed it by manually editing the log file.[/quote] I also have never come across anything like this in our logbooks (approx. 10000 entries), so it doesn't look like a bug.   Problem submitting entries in ELOG after migrating from Windows to Linux, posted by Edmundo T Rodriguez on Thu Mar 9 21:10:18 2006  I was able to install ELOG v2.61. in a Compaq ProLiant DL360 running with SUSE Linux v10 The migration/implementation went quiet well ...       Re: Problem submitting entries in ELOG after migrating from Windows to Linux, posted by Steve Jones on Fri Mar 10 06:12:55 2006  [quote="Edmundo T Rodriguez"]I was able to install ELOG v2.61. in a Compaq ProLiant DL360 running with SUSE Linux v10 The migration/implementation went quiet well ...   Strange "bug?" report - disappearing data when attribute is "Locked", posted by Steve Jones on Thu Mar 9 06:04:46 2006  [quote="Steve Jones"]I have come across an issue where an attribute value is "blanked" upon either editing or replying. The interesting thing is this is a logbook entry that was "Moved" from one logbook to another, all under the same Top Group.  All configs are done under the [global <topgroup>] so the attribute is not being reset on purpose.  Most interesting of all is this only happens:   Removing 'New' from "List Menu commands" prevents saving elogd.cfg, posted by Steve Jones on Thu Mar 9 04:46:42 2006  Strange as it mmay seem, when I attempt to remove the "New" menu item from "List Menu commands" in a logbook section, I am no longer able to Save the config file -- I am presented with a message saying "Error: Command "Save" not allowed".  I have to manually edit the file, add that menu item back in, and then all is ok.  This is on the system where I am using 'Top Groups', so the logbook is a part of one of the top groups.   OPTION <attribute> not working right in [ global <name>] Top Group, posted by Steve Jones on Wed Mar 8 22:33:56 2006  I've verified that when the following is part of the definition of a [logbook] OR is part of a regular [global] config: [code]   Crafted URL causes elog to coredump, posted by Steve Jones on Sat Mar 4 06:08:29 2006  While playing with TOP GROUP I managed to get elog 2.6.1 1660 on Solaris 9 to coredump.  Since I didn't really understand TOP GROUP I tried a URL where I had http://elog.server.com/topgroupname/logbookname.  Putting that logbookname at the end caused elog to dump.       Re: Crafted URL causes elog to coredump, posted by Stefan Ritt on Mon Mar 6 14:04:12 2006  [quote="Steve Jones"]While playing with TOP GROUP I managed to get elog 2.6.1 1660 on Solaris 9 to coredump.  Since I didn't really understand TOP GROUP I tried a URL where I had http://elog.server.com/topgroupname/logbookname.  Putting that logbookname at the end caused elog to dump.          Re: Crafted URL causes elog to coredump, posted by Steve Jones on Mon Mar 6 17:35:52 2006  [quote="Stefan Ritt"][quote="Steve Jones"]While playing with TOP GROUP I managed to get elog 2.6.1 1660 on Solaris 9 to coredump.  Since I didn't really understand TOP GROUP I tried a URL where I had http://elog.server.com/topgroupname/logbookname.  Putting that logbookname at the end caused elog to dump.             Re: Crafted URL causes elog to coredump, posted by Stefan Ritt on Mon Mar 6 17:45:18 2006  [quote="Steve Jones"]Try a non-existent logbook - example http://midas.psi.ch/elogs/elog/NewForum.  This is occurring under rev 1660. [/QUOTE] No, the above link just works fine, just click it.                Re: Crafted URL causes elog to coredump, posted by Steve Jones on Mon Mar 6 18:04:39 2006  [quote="Stefan Ritt"][quote="Steve Jones"]Try a non-existent logbook - example http://midas.psi.ch/elogs/elog/NewForum.  This is occurring under rev 1660. [/QUOTE]                Re: Crafted URL causes elog to coredump, posted by Steve Jones on Mon Mar 6 18:06:32 2006  [quote="Stefan Ritt"][quote="Steve Jones"]Try a non-existent logbook - example http://midas.psi.ch/elogs/elog/NewForum.  This is occurring under rev 1660. [/QUOTE]                   [UPDATE] Re: Crafted URL causes elog to coredump, posted by Steve Jones on Mon Mar 6 18:54:32 2006  [quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Try a non-existent logbook - example http://midas.psi.ch/elogs/elog/NewForum.  This is occurring under rev 1660. [/QUOTE]                      [UPDATE2] Re: Crafted URL causes elog to coredump, posted by Steve Jones on Wed Mar 8 18:05:54 2006  [quote="Steve Jones"][quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Try a non-existent logbook - example http://midas.psi.ch/elogs/elog/NewForum.  This is occurring under rev 1660. [/QUOTE]                         [Segmentation Fault source identified] Verbose Output: Re: Crafted URL causes elog to coredump, posted by Steve Jones on Wed Mar 8 20:19:14 2006  [quote="Steve Jones"][quote="Steve Jones"][quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Try a non-existent logbook - example http://midas.psi.ch/elogs/elog/NewForum.  This is occurring under rev 1660. [/QUOTE]   require smileys to have whitespace on either side?, posted by Glenn Horton-Smith on Sat Mar 4 05:17:14 2006  It would be nice if elog would only interpret something as a smiley if it is surrounded by whitespace.  It can be particularly annoying that an 8 followed by a right paren becomes a "cool" smiley -- e.g., a parenthetical reference to event eighteen (18) becomes mangled...  [That was "18" inside the parens.]       Re: require smileys to have whitespace on either side?, posted by Stefan Ritt on Mon Mar 6 13:50:07 2006  [quote="Glenn Horton-Smith"]It would be nice if elog would only interpret something as a smiley if it is surrounded by whitespace.  It can be particularly annoying that an 8 followed by a right paren becomes a "cool" smiley -- e.g., a parenthetical reference to event eighteen (18) becomes mangled...  [That was "18" inside the parens.]          Provide option to require smileys to be bracketed a la ELCode?, posted by Glenn Horton-Smith on Mon Mar 6 20:51:57 2006  [quote="Stefan Ritt"][quote="Glenn Horton-Smith"]It would be nice if elog would only interpret something as a smiley if it is surrounded by whitespace.  It can be particularly annoying that an 8 followed by a right paren becomes a "cool" smiley -- e.g., a parenthetical reference to event eighteen (18) becomes mangled...  [That was "18" inside the parens.] ...   eLog Version number as eLog attribute?, posted by Steve Jones on Fri Feb 24 16:40:38 2006  When a footer is used (via Bottom text = <filename>) eLog no longer displays the eLog version number at the bottom.  Is it possible to somehow expose the version/revision as an eLog attribute or have the version still display even when a replacement footer is specified?         Re: eLog Version number as eLog attribute?, posted by Stefan Ritt on Wed Mar 1 10:31:33 2006  [quote="Steve Jones"]When a footer is used (via Bottom text = <filename>) eLog no longer displays the eLog version number at the bottom.  Is it possible to somehow expose the version/revision as an eLog attribute or have the version still display even when a replacement footer is specified?            Re: eLog Version number as eLog attribute?, posted by Steve Jones on Wed Mar 1 20:22:28 2006  [quote="Stefan Ritt"][quote="Steve Jones"]When a footer is used (via Bottom text = <filename>) eLog no longer displays the eLog version number at the bottom.  Is it possible to somehow expose the version/revision as an eLog attribute or have the version still display even when a replacement footer is specified?               [RESOLVED] eLog Version number as eLog attribute?, posted by Steve Jones on Mon Mar 6 18:36:34 2006  [quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]When a footer is used (via Bottom text = <filename>) eLog no longer displays the eLog version number at the bottom.  Is it possible to somehow expose the version/revision as an eLog attribute or have the version still display even when a replacement footer is specified?     Allow $attributes in "Comment = " option, posted by Steve Jones on Fri Mar 3 18:02:59 2006  Is it possible to allow $attribute substitutions in the "Comment =" option for logbooks?       Re: Allow $attributes in "Comment = " option, posted by Stefan Ritt on Mon Mar 6 13:40:40 2006  [quote="Steve Jones"]Is it possible to allow $attribute substitutions in the "Comment =" option for logbooks?[/quote] The "Comment =" option for logbooks gives a general comment, like [b]Discussion forum about ELOG[/b] for this forum. Since this comment is global, it does          Re: Allow $attributes in "Comment = " option, posted by Steve Jones on Mon Mar 6 17:43:11 2006  [quote="Stefan Ritt"][quote="Steve Jones"]Is it possible to allow $attribute substitutions in the "Comment =" option for logbooks?[/quote] The "Comment =" option for logbooks gives a general comment, like [b]Discussion forum about ELOG[/b] for this forum. Since this comment is global, it does   Find in multiple logbooks returns wrong pages, posted by Patrick Decowski on Mon Feb 27 19:29:15 2006  hello ELOG developers, i think that i found a problem in the find function of ELOG  version 2.6.1. i can reproduce it on the forum ELOG website on midas.psi.ch:       Re: Find in multiple logbooks returns wrong pages, posted by Stefan Ritt on Mon Mar 6 13:06:59 2006  This problem has been fixed in SVN revision 1671.   Top Groups and logbook directorys, posted by Steve Jones on Thu Mar 2 23:32:25 2006  I am re-working our elog setup and am seriously looking at using the "Top Group" feature.  What I like best is the ability to create [global] configurations for a group (or type) of logbook when I host multiple types on the same server.  I also like being able to specify a different password file, etc.       Re: Top Groups and logbook directorys, posted by Steve Jones on Sat Mar 4 06:04:53 2006  [quote="Steve Jones"]I am re-working our elog setup and am seriously looking at using the "Top Group" feature.  What I like best is the ability to create [global] configurations for a group (or type) of logbook when I host multiple types on the same server.  I also like being able to specify a different password file, etc.   Makefile patch for OS X 10.4, posted by Alexandre Gauthier on Fri Mar 3 16:48:01 2006  Hello, I had trouble compiling elog on Mac OS X 10.4, and so, I hacked the makefile around...   list view mode remembert - Bug?, posted by Holger Mundhahs on Mon Feb 27 10:33:43 2006  As default http://<hostname>/<LOGBOOK> shows the Summary View. Clicking in "Full" changes the URL to http://<hostname>/<LOGBOOK>/?mode=full. But now the URL http://<hostname>/<LOGBOOK> show the Full view as default.       Re: list view mode remembert - Bug?, posted by Stefan Ritt on Wed Mar 1 07:55:42 2006  > As default http://<hostname>/<LOGBOOK> shows the Summary View. > Clicking in "Full" changes the URL to http://<hostname>/<LOGBOOK>/?mode=full. > But now the URL http://<hostname>/<LOGBOOK> show the Full view as default.          [SOLVED] Re: list view mode remembert - Bug?, posted by Holger Mundhahs on Wed Mar 1 12:27:36 2006  > > As default http://<hostname>/<LOGBOOK> shows the Summary View. > > Clicking in "Full" changes the URL to http://<hostname>/<LOGBOOK>/?mode=full. > > But now the URL http://<hostname>/<LOGBOOK> show the Full view as default.   How to setup Change attributes in detail view/edit mode ?, posted by Holger Mundhahs on Wed Feb 22 16:27:39 2006  Hello @all, because I've got a very quick response on my 1st question regarding       Re: How to setup Change attributes in detail view/edit mode ?, posted by Stefan Ritt on Wed Feb 22 20:36:53 2006  > because I've got a very quick response on my 1st question regarding > "Change attributes" here is anonther one:          Re: How to setup Change attributes in detail view/edit mode ?, posted by Holger Mundhahs on Thu Feb 23 08:44:25 2006  Hello Mr. Ritt, I've changed the category to "Request" because I think it would be practical             Re: How to setup Change attributes in detail view/edit mode ?, posted by Stefan Ritt on Thu Feb 23 09:19:27 2006  > I've changed the category to "Request" because I think it would be practical > if I can hide the attributes which are build on values of other attributes with > "Change".                Re: How to setup Change attributes in detail view/edit mode ?, posted by Holger Mundhahs on Thu Feb 23 09:45:54 2006  No, I havn't tried it, because it's the only way where I can see ALL attributes, and I belief, that it works to hide the attributes on all views.                   Re: How to setup Change attributes in detail view/edit mode ?, posted by Stefan Ritt on Wed Mar 1 10:30:51 2006  I implemented a "Hide attributes = ..." option, with which you can do what you requested, but unfortunately I'm sitting here in Siberia and have only limited internet access, so I can only submit the modification next weekend.   MOptions problem ?, posted by Alex H on Wed Feb 22 11:05:15 2006  Hi Stephan, I have a unknown bug and need help :)!       Re: MOptions problem ?, posted by Alex H on Mon Feb 27 11:16:56 2006  [quote="Alex H"]Hi Stephan, I have a unknown bug and need help :)!          Re: MOptions problem ?, posted by Holger Mundhahs on Mon Feb 27 13:26:31 2006  Hello Alex, can you please provide the following information:             Re: MOptions problem ?, posted by Alex H on Tue Feb 28 09:56:55 2006  Hi Holger, > Which ELOG version do you use?                Re: MOptions problem ?, posted by Alex H on Tue Feb 28 11:26:22 2006  > Hi Holger, >  > > Which ELOG version do you use?                   [SOLVED] Re: MOptions problem ?, posted by Alex H on Tue Feb 28 12:08:42 2006  Yop, I think I found the solution! I was in fact a [B]conditions[/B] conflict! See the attached picture for easiest comprehension.                      [SOLVED] Re: MOptions problem ?, posted by Stefan Ritt on Wed Mar 1 07:48:11 2006  [quote="Alex H"]It seems that the condition ID must be unique across the whole elogd.cfg.[/quote] Right. Here is a quote from the Manual:   Forgot password, posted by Hagelstein, Kay on Mon Feb 27 08:43:22 2006  Hi, the "Forgot password?" option doesn’t work with the Group option.   Protect Selection page, posted by Hagelstein, Kay on Thu Feb 23 15:07:53 2006  Hi,  I have a problem with the Option “Protect Selection page = 1” it doesn’t word in my Configuration. Is This a bug or a Problem with the Configuration?       Re: Protect Selection page, posted by Stefan Ritt on Thu Feb 23 15:50:20 2006  [quote="Hagelstein, Kay"]I have a problem with the Option “Protect Selection page = 1” it doesn’t word in my Configuration. Is This a bug or a Problem with the Configuration?[/quote]          Re: Protect Selection page, posted by Hagelstein, Kay on Thu Feb 23 16:36:42 2006  [quote="Stefan Ritt"][quote="Hagelstein, Kay"]I have a problem with the Option “Protect Selection page = 1” it doesn’t word in my Configuration. Is This a bug or a Problem with the Configuration?[/quote]   Comment <attr>/Tooltip <attr> not shown in detail view, posted by Holger Mundhahs on Thu Feb 23 12:06:44 2006  I've defined a comment or a tooltip for an attribute. But the text is only shown in NEW/EDIT/REPLY mode, not in detail view. Is this a bug or how can I enable the text (especially Comment) in       Re: Comment <attr>/Tooltip <attr> not shown in detail view, posted by Stefan Ritt on Thu Feb 23 15:20:40 2006  [quote="Holger Mundhahs"]I've defined a comment or a tooltip for an attribute. But the text is only shown in NEW/EDIT/REPLY mode, not in detail view. Is this a bug or how can I enable the text (especially Comment) in   How to build own/customized selection page?, posted by Holger Mundhahs on Wed Feb 22 19:04:19 2006  Hello @all, with "Selection page = ..." I can link to an self defined selection page for the systems.       Re: How to build own/customized selection page?, posted by Stefan Ritt on Wed Feb 22 20:00:19 2006  [quote="Holger Mundhahs"]Hello @all, with "Selection page = ..." I can link to an self defined selection page for the systems.   List view for CHANGE attributes, posted by Holger Mundhahs on Wed Feb 22 13:49:03 2006  Hello @all, I've tried to implement an attribute with Change. The detail view works well, but in the list view the field is empty (see screen shots). Can somebody help me?       Re: List view for CHANGE attributes, posted by Stefan Ritt on Wed Feb 22 13:55:08 2006  > Hello @all, > I've tried to implement an attribute with Change. The detail view works well, > but in the list view the field is empty (see screen shots). Can somebody help me?          Re: List view for CHANGE attributes, posted by Holger Mundhahs on Wed Feb 22 15:47:45 2006  Hello Mr. Ritt, 6 min 5 sek to answer - great. :D :D   svn revision number in the source, posted by Steve Jones on Tue Feb 21 19:25:28 2006  There is a variable $Id$ in source that looks like it is supposed to reflect the svn revision number of the compiled code.  How is this supposed to be set, manually just before compiling?         Re: svn revision number in the source, posted by Stefan Ritt on Tue Feb 21 20:24:18 2006  [quote="Steve Jones"]There is a variable $Id$ in source that looks like it is supposed to reflect the svn revision number of the compiled code.  How is this supposed to be set, manually just before compiling?[/quote]          Re: svn revision number in the source, posted by Steve Jones on Tue Feb 21 21:01:22 2006  [quote="Stefan Ritt"][quote="Steve Jones"]There is a variable $Id$ in source that looks like it is supposed to reflect the svn revision number of the compiled code.  How is this supposed to be set, manually just before compiling?[/quote]             Re: svn revision number in the source, posted by Stefan Ritt on Tue Feb 21 21:17:13 2006  [quote="Steve Jones"]So, when we go to the download section and download directly from there, that is not "committed" source?  I ask because the revision id there is not set to anything that I can see.[/quote]                Re: svn revision number in the source, posted by Steve Jones on Tue Feb 21 21:58:16 2006  [quote="Stefan Ritt"][quote="Steve Jones"]So, when we go to the download section and download directly from there, that is not "committed" source?  I ask because the revision id there is not set to anything that I can see.[/quote]                   Re: svn revision number in the source, posted by Steve Jones on Tue Feb 21 22:13:40 2006  [quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]So, when we go to the download section and download directly from there, that is not "committed" source?  I ask because the revision id there is not set to anything that I can see.[/quote]                      Re: svn revision number in the source, posted by Stefan Ritt on Tue Feb 21 22:33:32 2006  [quote="Steve Jones"]I have no idea how I got to CVS[/quote] I realized that I had an old link to CVS when I checked your previous posting, so I updated that link like 30 min ago. That's why you got a new one.                         Re: svn revision number in the source, posted by Steve Jones on Tue Feb 21 22:37:14 2006  [quote="Stefan Ritt"][quote="Steve Jones"]I have no idea how I got to CVS[/quote] I realized that I had an old link to CVS when I checked your previous posting, so I updated that link like 30 min ago. That's why you got a new one.[/quote]   compiling elog 2.6.1 on solaris platform, posted by Angus Au on Thu Feb 2 03:19:44 2006  I came across problem in compiling elog 2.6.1 on solaris platform. The messages "       Re: compiling elog 2.6.1 on solaris platform, posted by Willem Koster on Fri Feb 3 13:10:14 2006  [quote="Angus Au"]I came across problem in compiling elog 2.6.1 on solaris platform. Is there any fix ? I can compile elog 2.6.0 successfully on solaris.[/quote]       Re: compiling elog 2.6.1 on solaris platform, posted by Stefan Ritt on Mon Feb 6 08:27:40 2006  [quote="Angus Au"]ld: fatal: library -lutil: not found[/quote] The [B]util[/B] library was added recently because of the new shell substitution functionaly, which requires the [B]forkpty()[/B] function call. If you          Re: compiling elog 2.6.1 on solaris platform, posted by Steve Jones on Mon Feb 6 16:44:46 2006  [quote="Stefan Ritt"][quote="Angus Au"]ld: fatal: library -lutil: not found[/quote] The [B]util[/B] library was added recently because of the new shell substitution functionaly, which requires the [B]forkpty()[/B] function call. If you             Re: compiling elog 2.6.1 on solaris platform, posted by Stefan Ritt on Mon Feb 6 16:48:17 2006  [QUOTE="Steve Jones"]I have checked and can find no reference within Sun documents regarding the support of the forkpty() function.  I have not been following elog development lately -- what is shell substitution supposed to buy us?[/QUOTE]                Re: compiling elog 2.6.1 on solaris platform, posted by Steve Jones on Wed Feb 8 18:19:02 2006  [quote="Stefan Ritt"][QUOTE="Steve Jones"]I have checked and can find no reference within Sun documents regarding the support of the forkpty() function.  I have not been following elog development lately -- what is shell substitution supposed to buy us?[/QUOTE]                   Re: compiling elog 2.6.1 on solaris platform, posted by Steve Jones on Wed Feb 8 18:34:43 2006  [quote="Steve Jones"][quote="Stefan Ritt"][QUOTE="Steve Jones"]I have checked and can find no reference within Sun documents regarding the support of the forkpty() function.  I have not been following elog development lately -- what is shell substitution supposed to buy us?[/QUOTE]                      Re: compiling elog 2.6.1 on solaris platform, posted by Stefan Ritt on Fri Feb 10 13:58:17 2006  [quote="Steve Jones"]Stefan, I found the following "forkpty()" replacement for running under Solaris.[/quote] Ok, I put your code into the current SVN revision (1656). Unfortunately I cannot try it due to the lack of a Sun. Maybe you can try and tell me if it's                         Re: compiling elog 2.6.1 on solaris platform, posted by Steve Jones on Fri Feb 10 17:22:36 2006  [quote="Stefan Ritt"][quote="Steve Jones"]Stefan, I found the following "forkpty()" replacement for running under Solaris.[/quote] Ok, I put your code into the current SVN revision (1656). Unfortunately I cannot try it due to the lack of a Sun. Maybe you can try and tell me if it's                            Re: compiling elog 2.6.1 on solaris platform, posted by Stefan Ritt on Fri Feb 10 17:29:03 2006  [quote="Steve Jones"]Actually, what I will be delivering is a new Makefile with conditional compile statements plus the C code module since the example that I provided need some cleaning.  Since I don't have a Linux system on which to test the conditional compile completely I would need you to do that.  Sound ok?                               Re: compiling elog 2.6.1 on solaris platform, posted by Steve Jones on Fri Feb 10 20:24:56 2006  [quote="Stefan Ritt"][quote="Steve Jones"]Actually, what I will be delivering is a new Makefile with conditional compile statements plus the C code module since the example that I provided need some cleaning.  Since I don't have a Linux system on which to test the conditional compile completely I would need you to do that.  Sound ok?                                  Re: compiling elog 2.6.1 on solaris platform, posted by Stefan Ritt on Fri Feb 10 20:29:12 2006  [quote="Steve Jones"]Ok, I see what you did.   I took a different route since I was not sure how the gnu linker would handle the fact that there would be two declarations of the forkpty() function when compiled and linked under Linux.  Instead, I created a separate forkpty.c module and compiled it separately.  Then, if "solaris", link it in.  Otherwise, use library "util" which already has forkpty().                                     Re: compiling elog 2.6.1 on solaris platform, posted by Steve Jones on Fri Feb 10 21:52:35 2006  [quote="Stefan Ritt"][quote="Steve Jones"]Ok, I see what you did.   I took a different route since I was not sure how the gnu linker would handle the fact that there would be two declarations of the forkpty() function when compiled and linked under Linux.  Instead, I created a separate forkpty.c module and compiled it separately.  Then, if "solaris", link it in.  Otherwise, use library "util" which already has forkpty().                                        Re: compiling elog 2.6.1 on solaris platform, posted by Steve Jones on Fri Feb 10 22:31:38 2006  [quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Ok, I see what you did.   I took a different route since I was not sure how the gnu linker would handle the fact that there would be two declarations of the forkpty() function when compiled and linked under Linux.  Instead, I created a separate forkpty.c module and compiled it separately.  Then, if "solaris", link it in.  Otherwise, use library "util" which already has forkpty().                                           Re: compiling elog 2.6.1 on solaris platform, posted by Stefan Ritt on Fri Feb 10 22:35:20 2006  [quote="Steve Jones"]BTW, Stefan, this code in Makefile does not work on Solaris [code] OSTYPE = $(shell uname)                                              Re: compiling elog 2.6.1 on solaris platform, posted by Steve Jones on Mon Feb 13 18:22:08 2006  [quote="Stefan Ritt"][quote="Steve Jones"]BTW, Stefan, this code in Makefile does not work on Solaris [code] OSTYPE = $(shell uname)                                                 Re: compiling elog 2.6.1 on solaris platform, posted by Steve Jones on Mon Feb 20 17:52:06 2006  [quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]BTW, Stefan, this code in Makefile does not work on Solaris [code] OSTYPE = $(shell uname)   CONCERN: Cross-platform compiling at risk, posted by Steve Jones on Tue Feb 14 16:22:56 2006  Stefan, I am concerned that there are becoming too many Linux dependencies in terms of required libraries and header files.  Although we have a replacement for the [code]forkpty()[/code] routine, I am running into many other dependencies, the latest of which is pty.h.  Aren't there guidelines in GCC that point out what is available cross-platform and what is not?  For example, any SVR# (System Five, Release XX) based Unix will not include the forkpty() function,       Re: CONCERN: Cross-platform compiling at risk, posted by Stefan Ritt on Tue Feb 14 17:43:15 2006  [quote="Steve Jones"]Stefan, I am concerned that there are becoming too many Linux dependencies in terms of required libraries and header files.  Although we have a replacement for the [code]forkpty()[/code] routine, I am running into many other dependencies, the latest of which is pty.h.  Aren't there guidelines in GCC that point out what is available cross-platform and what is not?  For example, any SVR# (System Five, Release XX) based Unix will not include the          Re: CONCERN: Cross-platform compiling at risk, posted by Steve Jones on Tue Feb 14 22:31:08 2006  [quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Stefan, I am concerned that there are becoming too many Linux dependencies in terms of required libraries and header files.  Although we have a replacement for the [code]forkpty()[/code] routine, I am running into many other dependencies, the latest of which is pty.h.  Aren't there guidelines in GCC that point out what is available cross-platform and what is not?  For example, any SVR# (System Five,             Re: CONCERN: Cross-platform compiling at risk, posted by Stefan Ritt on Wed Feb 15 18:25:15 2006  [quote="Steve Jones"]Question: Is the functionality really just to issue an arbitrary command-string to a "shell" and have the result stuffed back into an eLog variable?  I'm not an expert but it would seem that such a feature would be universally available or could be used to construct a suitable routine.                  Re: CONCERN: Cross-platform compiling at risk, posted by Steve Jones on Wed Feb 15 19:02:32 2006  [quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Question: Is the functionality really just to issue an arbitrary command-string to a "shell" and have the result stuffed back into an eLog variable?  I'm not an expert but it would seem that such a feature would be universally available or could be used to construct a suitable routine.                     Re: CONCERN: Cross-platform compiling at risk, posted by Stefan Ritt on Fri Feb 17 13:31:00 2006  [quote="Steve Jones"]If possible, could one use the [code]int system(const char *s);[/code] function in conjunction with a filei/o function as the means for getting the results of a system call back into a var.  Perhaps [code]char *tmpnam(char *s);[/code], running a command via [code]int system(const char *s);[/code], then opening that file for a read would accomplish what is being desired?                      Re: CONCERN: Cross-platform compiling at risk, posted by Steve Jones on Mon Feb 20 17:50:33 2006  [quote="Stefan Ritt"][quote="Steve Jones"]If possible, could one use the [code]int system(const char *s);[/code] function in conjunction with a filei/o function as the means for getting the results of a system call back into a var.  Perhaps [code]char *tmpnam(char *s);[/code], running a command via [code]int system(const char *s);[/code], then opening that file for a read would accomplish what is being desired?   Accessing elog through two apache servers..., posted by Dimitrios Tsirigkas on Tue Feb 14 12:57:37 2006  Hello, We have elogd running on a pc, say cmsdaqpreseries, that also runs an apache server and we've made sure that it's only accessible through the apache server,       Re: Accessing elog through two apache servers..., posted by Stefan Ritt on Tue Feb 14 13:40:49 2006  Hi Dimitrios, I know where your problem is and you could actually help me in solving it. The reason of the problem is the redirection. After you login, you get redirected          Re: Accessing elog through two apache servers..., posted by Dimitrios Tsirigkas on Tue Feb 14 14:23:04 2006  Hi Stefan,  [quote="Stefan Ritt"]             Re: Accessing elog through two apache servers..., posted by Dimitrios Tsirigkas on Tue Feb 14 16:06:28 2006  Hi, The problem was coming from the fact that elog did not supports request coming from multiple hops through proxies. You got the ful string of them in the                Re: Accessing elog through two apache servers..., posted by Stefan Ritt on Wed Feb 15 18:13:25 2006  Thanks for the patch, I committed it to Subversion Revision #1657.   email problems, posted by Chris Warner on Tue Feb 7 21:02:22 2006  When I select to get email notification on new logbook entries I receive this error when entering a new record. Error sending Email via "xxx.xxx.xxx.xx": Syntax error, parameters in command "MAIL FROM: christopher_warner@xxx.gov SIZE=1985" unrecognized or missing       Re: email problems, posted by Stefan Ritt on Wed Feb 8 15:29:03 2006  [quote="Chris Warner"]Error sending Email via "xxx.xxx.xxx.xx": Syntax error, parameters in command "MAIL FROM: christopher_warner@xxx.gov SIZE=1985" unrecognized or missing [/quote]          Re: email problems, posted by Chris Warner on Wed Feb 8 18:38:30 2006  The email address id correct. I am using an Elog Binary. I don't have the source code . Chris Warner             Re: email problems, posted by Stefan Ritt on Thu Feb 9 09:09:30 2006  [quote="Chris Warner"]The email address id correct. I am using an Elog Binary. I don't have the source code.[/quote] Ok, so I removed the [B]SIZE=xxx[/B] parameter, which is not strictly necessary anyhow I believe. So wait for the next release, and you can try.                Re: email problems, posted by Chris Warner on Fri Feb 10 21:26:33 2006  Do you have an ise when that will be? [quote="Stefan Ritt"][quote="Chris Warner"]The email address id correct. I am using an Elog Binary. I don't have the source code.[/quote]                   Re: email problems, posted by Stefan Ritt on Fri Feb 10 21:50:27 2006  [quote="Chris Warner"]Do you have an ise when that will be?[/quote] In about a week from now.   Posting without logging in!, posted by Dimitrios Tsirigkas on Thu Feb 9 14:15:54 2006  Hi all! This is an HTTP POST request submitted from the command line using curl, and providing no authentication information. If I can post as myself using this command, then shouldn't something be done about this? Cheers, Dimitris       Re: Posting without logging in!, posted by Stefan Ritt on Fri Feb 10 11:41:38 2006  [quote="Dimitris"]Hi all! This is an HTTP POST request submitted from the command line using curl, and providing no authentication information. If I can post as myself using this command, then shouldn't something be done about this?[/quote]          Re: Posting without logging in!, posted by Dimitrios Tsirigkas on Fri Feb 10 16:16:11 2006  [quote="Stefan Ritt"] Yes indeed. I fixed that in SVN revision 1655. I upgraded this server so you can try again if it works.[/quote]   Work on PAM Support?, posted by Steve Jones on Wed Feb 8 18:23:52 2006  Stefan (or any others): Has anyone been seriously looking into building in PAM support in eLog?  I ask because I have started reading the developer papers from Sun and looking       Re: Work on PAM Support?, posted by Stefan Ritt on Thu Feb 9 09:12:44 2006  [quote="Steve Jones"]Has anyone been seriously looking into building in PAM support in eLog?  I ask because I have started reading the developer papers from Sun and looking at sample code.[/quote]          Re: Work on PAM Support?, posted by Steve Jones on Thu Feb 9 19:51:26 2006  [quote="Stefan Ritt"][quote="Steve Jones"]Has anyone been seriously looking into building in PAM support in eLog?  I ask because I have started reading the developer papers from Sun and looking at sample code.[/quote]   menu commands - user list does not match config list, posted by Alan Stone on Thu Feb 9 00:37:29 2006  I am attempting to configure the Elog for use at the CMS Remote Operations Center at Fermilab.  I included the following option:       Re: menu commands - user list does not match config list, posted by Stefan Ritt on Thu Feb 9 09:04:05 2006  [quote="Alan Stone"]I am attempting to configure the Elog for use at the CMS Remote Operations Center at Fermilab.  I included the following option:   Problem with MOptions , posted by Ulrich Trüssel on Wed Feb 8 07:31:09 2006  After upgrading to 2.6.1-1 (actually donwgraded in case of this problem to 2.6.0) i was not longer able to selct more than one MOptions selection in my ELOGs. Only the first slected selection was acepted by ELOG. Ex:       Re: Problem with MOptions , posted by Stefan Ritt on Wed Feb 8 11:56:02 2006  [quote="Ulrich Trüssel"]After upgrading to 2.6.1-1 (actually donwgraded in case of this problem to 2.6.0) i was not longer able to selct more than one MOptions selection in my ELOGs. Only the first slected selection was acepted by ELOG. Ex:   Numbered lists get closed by </ul>, posted by T. Ribbrock on Mon Jan 30 16:26:08 2006  I just ran into the following problem (and was able to reproduce it in the "demo" logbook on this site): [LIST]       Re: Numbered lists get closed by </ul>, posted by Stefan Ritt on Tue Feb 7 12:58:10 2006  [quote="T. Ribbrock"]I just ran into the following problem (and was able to reproduce it in the "demo" logbook on this site): [LIST]   sort after find, posted by Willem Koster on Fri Feb 3 12:38:57 2006  When I do a find (like Field1 = XXX ) and then try to sort the results I get the entire list again (but sorted) instead of the sorted results.  But when I fabricate a url manually like       Re: sort after find, posted by Stefan Ritt on Mon Feb 6 17:15:11 2006  [quote="Willem Koster"]Obviously I would like to be able to sort the result of a find-query.[/quote] That worked some time ago, but did not work currently. So I fixed that in the current SVN version.   elog allows me to create user "blahblah ", posted by Dimitrios Tsirigkas on Fri Feb 3 18:15:47 2006  Hi, I noticed that when I register a username that contains whitespaces (eg "boing "), elog allows me to create the user of that name and updates the password       Re: elog allows me to create user "blahblah ", posted by Dimitrios Tsirigkas on Fri Feb 3 18:25:32 2006  By the way, it is also possible to create a user that doesn't have a password! Shouldn't that be forbidden? Dimitris          Re: elog allows me to create user "blahblah ", posted by Stefan Ritt on Mon Feb 6 12:54:25 2006  [quote="Dimitrios Tsirigkas"]By the way, it is also possible to create a user that doesn't have a password! Shouldn't that be forbidden?[/quote] Well, some people want that!             Re: elog allows me to create user "blahblah ", posted by Dimitrios Tsirigkas on Mon Feb 6 16:27:45 2006  [quote="Stefan Ritt"][quote="Dimitrios Tsirigkas"]By the way, it is also possible to create a user that doesn't have a password! Shouldn't that be forbidden?[/quote] Well, some people want that![/quote]                Re: elog allows me to create user "blahblah ", posted by Stefan Ritt on Mon Feb 6 16:53:41 2006  [quote="Dimitrios Tsirigkas"]I wouldn't want some imposter to start entering stuff under the username of another user, so it would be nice if I could have some way of forcing them to have a password, even if it's a one-letter password.[/quote]       Re: elog allows me to create user "blahblah ", posted by Stefan Ritt on Mon Feb 6 12:58:26 2006  [quote="Dimitrios Tsirigkas"]I noticed that when I register a username that contains whitespaces (eg "boing "), elog allows me to create the user of that name and updates the password file accordingly. It doesn't log me in, but it gives me no error message either. I also found that if I repeat the process it adds yet another entry in the password file, by the same name "boing ". Is that a bug or is there something wrong with my configuration?[/quote]   [261] problem with month selection, posted by Willem Koster on Fri Feb 3 11:54:22 2006  I have several date-fields defined in my logboek. But when I click the icon and select another month the pop-up  window get's filled  with the contants of the logboek instead of the date-selection.       Re: [261] problem with month selection, posted by Stefan Ritt on Mon Feb 6 12:52:09 2006  > I have several date-fields defined in my logboek. But when I click the icon and select another month the pop-up  > window get's filled  with the contants of the logboek instead of the date-selection.   Running ELOG under Apache, posted by Dimitrios Tsirigkas on Mon Jan 30 11:41:18 2006  Hi, Sorry if this has been asked elsewhere and I'm missing it. I want to stop users from accessing my elog by loading the URL: http://mycomputerURL:8080 and       Re: Running ELOG under Apache, posted by Stefan Ritt on Mon Jan 30 12:27:08 2006  [quote="Dimitrios Tsirigkas"]Sorry if this has been asked elsewhere and I'm missing it. I want to stop users from accessing my elog by loading the URL: http://mycomputerURL:8080 and only make it accessible through http://mycomputerURL/elog. The end goal would be to use Apache to control access. I followed the instructions under "Running elogd under Apache" in the admin guide, but what that did was simply to redirect browsers trying to load ttp://mycomputerURL/elog   ELOG v2.6.0-beta5 (Windows) crashes while using " Forgot password?", posted by Edmundo T Rodriguez on Thu Nov 3 23:39:46 2005  The following ELOG behavior seems to be like a bug ... -> Anybody click on "Forgot password?" in the login screen, to have the system       Re: ELOG v2.6.0-beta5 (Windows) crashes while using " Forgot password?", posted by Stefan Ritt on Mon Nov 7 09:25:59 2005  [quote="Edmundo T Rodriguez"]The following ELOG behavior seems to be like a bug ... -> Anybody click on "Forgot password?" in the login screen, to have the system          Re: ELOG v2.6.0 (Linux) crashes while using " Forgot password?", posted by Dimitrios Tsirigkas on Thu Jan 26 15:04:32 2006  Hi, -> Anybody click on "Forgot password?" in the login screen, to have the system             Re: ELOG v2.6.0 (Linux) crashes while using " Forgot password?", posted by Stefan Ritt on Thu Jan 26 15:07:11 2006  [quote="Dimitrios Tsirigkas"]Is there going to be a fix for that version as well?[/quote] A fix is always for all versions, since I have a common code base. Have you tried Version 2.6.1?                Re: ELOG v2.6.0 (Linux) crashes while using " Forgot password?", posted by Dimitrios Tsirigkas on Thu Jan 26 15:19:58 2006  A fix is always for all versions, since I have a common code base. Have you tried Version 2.6.1?[/quote] I got the RPM last week, from the download page. When I run without the -D option it says that it is Version 2.6.0. Since a new version came out in the                   Re: ELOG v2.6.0 (Linux) crashes while using " Forgot password?", posted by Dimitrios Tsirigkas on Mon Jan 30 10:21:41 2006  [quote="Dimitrios Tsirigkas"]A fix is always for all versions, since I have a common code base. Have you tried Version 2.6.1?[/quote] Yep, 2.6.1 works fine. Thanks,   Running elog as ordinnary user, posted by G. Vandemoortele on Fri Jan 27 20:40:00 2006  Hello, I've configured elog with some commands running a shell :       Re: Running elog as ordinnary user, posted by Stefan Ritt on Fri Jan 27 23:18:07 2006  [quote="G. Vandemoortele"]I've configured elog with some commands running a shell : Preset R-Date = $shell(/usr/bin/date +"%Y/%m/%d %H:%S")          Re: Running elog as ordinnary user, posted by G. Vandemoortele on Sat Jan 28 10:40:18 2006  [quote="Stefan Ritt"] First of all, you could use             Re: Running elog as ordinnary user, posted by Stefan Ritt on Sat Jan 28 12:54:03 2006  [quote="G. Vandemoortele"]Started via root (# /usr/sbin/elogd -c /home/gv/.elog/elogd.cfg -x), it works, but via "gv" ($ /usr/sbin/elogd -c /home/gv/.elog/elogd.cfg -x), it doesn't.[/quote]   Quicklink does not work for one field, posted by mark james on Mon Oct 24 12:00:51 2005  I am not so bold as to log this as a bug but one of my Quicklink fields just do not work. It is the "Spacecraft" field. When I select any 'Spacecraft' quicklink, the no. of records stays exactly the same (i.e. no. in full recordset). If I select F1, then I see F1 highlight in yellow in the string "4F1". But strangely the "F1" entries are not highlight. Very strange.       Re: Quicklink does not work for one field, posted by Stefan Ritt on Wed Jan 18 12:15:17 2006  [quote="mark james"]I am not so bold as to log this as a bug but one of my Quicklink fields just do not work.[/quote] Sorry my late reply, but now I have fixed this problem. The update is under SVN and will be contained in the next release.          Re: Quicklink does not work for one field, posted by mark james on Mon Jan 23 17:32:20 2006  [quote="Stefan Ritt"][quote="mark james"]I am not so bold as to log this as a bug but one of my Quicklink fields just do not work.[/quote] Sorry my late reply, but now I have fixed this problem. The update is under SVN and will be contained in the next release.[/quote]             Re: Quicklink does not work for one field, posted by mark james on Mon Jan 23 18:35:52 2006  [quote="mark james"][quote="Stefan Ritt"][quote="mark james"]I am not so bold as to log this as a bug but one of my Quicklink fields just do not work.[/quote] Sorry my late reply, but now I have fixed this problem. The update is under SVN and will be contained in the next release.[/quote]                Re: Quicklink does not work for one field, posted by Stefan Ritt on Tue Jan 24 08:11:13 2006  [quote="mark james"][quote="mark james"][quote="Stefan Ritt"][quote="mark james"]I am not so bold as to log this as a bug but one of my Quicklink fields just do not work.[/quote]                   Re: Quicklink does not work for one field, posted by mark james on Fri Jan 27 13:50:10 2006  [quote="Stefan Ritt"][quote="mark james"][quote="mark james"][quote="Stefan Ritt"][quote="mark james"]I am not so bold as to log this as a bug but one of my Quicklink fields just do not work.[/quote]                      Re: Quicklink does not work for one field, posted by Stefan Ritt on Fri Jan 27 13:52:34 2006  [quote="mark james"]OK. But where do I get this from? The "latest version of 19 Jan is still 1622.[/quote] If you can compile it yourself, you get it from Subversion (see [URL=/afs/pi.infn.it/group/mug/docs/talks/review_feb06/]here[/URL]). Otherwise you have   Suggestion additional ElCodes, posted by T. Ribbrock on Tue Jan 24 14:43:19 2006  I have to say, now that I'm finally on 2.6.x, I grew really fond of the ElCode stuff - great addition! It saves a lot of straight HTML typing for me... THANKS!       Re: Suggestion additional ElCodes, posted by Stefan Ritt on Tue Jan 24 22:52:48 2006  [quote="T. Ribbrock"]However, there are two things I'm missing: [LIST] [*] [I]Headings[/I]          Re: Suggestion additional ElCodes, posted by T. Ribbrock on Wed Jan 25 12:31:14 2006  [quote="Stefan Ritt"] Yes, I missed tables myself already. The headings I just put into the current SVN version (see this forum for how it works). [/quote]   Attachments in duplicated entries, posted by Bertram Metz on Thu Dec 8 10:32:37 2005  Hi, the [B]duplicate[/B] command duplicates the entry text itself, but it does not duplicate attachments.        Re: Attachments in duplicated entries, posted by Stefan Ritt on Wed Dec 21 20:54:11 2005  [quote="Bertram Metz"]The [B]duplicate[/B] command duplicates the entry text itself, but it does not duplicate attachments. If attachments in a duplicated entry are deleted, the original attachment files are deleted as well and cannot be accessed anymore within the original entry.          Re: Attachments in duplicated entries, posted by Bertram Metz on Tue Jan 24 14:39:21 2006  [quote="Stefan Ritt"][quote="Bertram Metz"]The [B]duplicate[/B] command duplicates the entry text itself, but it does not duplicate attachments. If attachments in a duplicated entry are deleted, the original attachment files are deleted as well and cannot be accessed anymore within the original entry.   redirect errors via apache2, posted by djek on Mon Jan 23 10:30:51 2006  Since elog 2.6.0 we cannot redirect our elog via apache2. in apache2.conf we have (had for a long time):       Re: redirect errors via apache2, posted by Stefan Ritt on Mon Jan 23 10:57:45 2006  > Since elog 2.6.0 we cannot redirect our elog via apache2. >  > in apache2.conf we have (had for a long time):          Re: redirect errors via apache2, posted by djek on Mon Jan 23 11:18:48 2006  > > Since elog 2.6.0 we cannot redirect our elog via apache2. > >  > > in apache2.conf we have (had for a long time):   Buffer Overflow?, posted by Chris Warner on Wed Jan 18 17:20:45 2006  Users can access root level directories by using a modified URL. I saw on some security web sites that this was a problem in previous versions. Was it not fixed in 2.6?       Re: Buffer Overflow?, posted by Stefan Ritt on Thu Jan 19 10:31:05 2006  [quote="Chris Warner"]Users can access root level directories by using a modified URL. I saw on some security web sites that this was a problem in previous versions. Was it not fixed in 2.6?          Re: Buffer Overflow?, posted by Chris Warner on Fri Jan 20 02:53:40 2006  [quote="Stefan Ritt"][quote="Chris Warner"]Users can access root level directories by using a modified URL. I saw on some security web sites that this was a problem in previous versions. Was it not fixed in 2.6?   In version 2.6 the themes do not work right on Windows., posted by Mark Coudriet on Tue Jan 17 16:04:28 2006  In version 2.6 the themes do not work right on Windows.  The URL is fixed at whichever logbook that is selected (e.g. ELOG 2.5.9-4 is <link rel="stylesheet" type="text/css" href="default.css"> & ELOG 2.6.0-1 is <link rel="stylesheet" type="text/css" href="http://localhost:8080/demo/default.css">).       Re: In version 2.6 the themes do not work right on Windows., posted by Stefan Ritt on Wed Jan 18 12:57:30 2006  [quote]The URL is fixed at whichever logbook that is selected (e.g. ELOG 2.5.9-4 is <link rel="stylesheet" type="text/css" href="default.css"> & ELOG 2.6.0-1 is <link rel="stylesheet" type="text/css" href="http://localhost:8080/demo/default.css">).[/quote]          Re: In version 2.6 the themes do not work right on Windows., posted by Mark Coudriet on Thu Jan 19 20:50:29 2006  [quote="Stefan Ritt"][quote]The URL is fixed at whichever logbook that is selected (e.g. ELOG 2.5.9-4 is <link rel="stylesheet" type="text/css" href="default.css"> & ELOG 2.6.0-1 is <link rel="stylesheet" type="text/css" href="http://localhost:8080/demo/default.css">).[/quote]             Re: In version 2.6 the themes do not work right on Windows., posted by Stefan Ritt on Thu Jan 19 20:53:01 2006  [quote="Mark Coudriet"]But I just updated to your new version 2.6.1 & everything is fine now. Thanks for your help! :D[/quote] Japp. I switched back to relative links for CSS again, seems to give less trouble. :]   settings for "show only new entries", posted by Ulrich Trüssel on Thu Jan 19 16:59:38 2006  how ca i set the date for the "show only new entries" button? maybe i missed somethin on the elog.cfg description? thank's for hint!  :-)       Re: settings for "show only new entries", posted by Stefan Ritt on Thu Jan 19 17:05:22 2006  [quote="Ulrich Trüssel"]how ca i set the date for the "show only new entries" button? maybe i missed somethin on the elog.cfg description? thank's for hint!  :-)[/quote]   Problems with ELOG and Internet Explorer, posted by Elaine Cristina Franchini dos Anjos on Fri Nov 4 16:51:32 2005  Hi, We are facing a problem when using the Internet Explorer browser to edit        Re: Problems with ELOG and Internet Explorer, posted by Stefan Ritt on Mon Nov 7 09:16:47 2005  [quote="Elaine Cristina Franchini dos Anjos"]We are facing a problem when using the Internet Explorer browser to edit  logbooks entries. The error occurs when we use the preview option.          Re: Problems with ELOG and Internet Explorer, posted by Elaine Cristina Franchini dos Anjos on Mon Nov 7 18:55:57 2005  Hi Stefan, [QUOTE]             Re: Problems with ELOG and Internet Explorer, posted by Stefan Ritt on Tue Nov 8 08:17:22 2005  [quote="Elaine Cristina Franchini dos Anjos"]I edited and used preview many times and the ELOG worked fine without errors in IE. So, I think my problem is something configured in the proxy or https that Internet Explorer doesn't work very well in this circumstance.[/quote]                Re: Problems with ELOG and Internet Explorer, posted by Elaine Cristina Franchini dos Anjos on Fri Jan 13 18:43:08 2006  Hi Stefan, I couldn't solve this problem yet...                   Re: Problems with ELOG and Internet Explorer, posted by Stefan Ritt on Wed Jan 18 13:31:32 2006  Have you tried another browser, like Firefox? Do you have the same problems with Firefox? Can you try the following: Start elogd manually with the "-v" flag, like   Attribute substitution in email configuration, posted by Adam Blandford on Wed Jan 18 02:22:44 2006  In the logbook config file I am not able to use attribute substitution in the <string> tag for [CODE]Use Email Heading = <string>[/CODE] Attribute substitution does work however for       Re: Attribute substitution in email configuration, posted by Stefan Ritt on Wed Jan 18 13:06:50 2006  [quote="Adam Blandford"]Not sure if this functionality is intended or is a bug.[/quote] It was not implemented, however you call this ;)   Email based on not attribute value, posted by Chris Warner on Tue Jan 17 14:09:17 2006  Is it possible to send an email if an attribute is [B]not[/B] equal to a specific value? For instance, I have a server logbook that several people are able to write to. There is one person that is ultimately responsible for this server. I would       Re: Email based on not attribute value, posted by Stefan Ritt on Wed Jan 18 12:49:39 2006  [quote="Chris Warner"]For instance, I have a server logbook that several people are able to write to. There is one person that is ultimately responsible for this server. I would like to generate an email any time that someone other than the System Administrator creates a new entry.[/quote]   localhost definition problem, posted by Jason Koglin on Tue Jan 17 01:01:05 2006  I've been running elog on my laptop for about a year.  I have had a problem several times now when I have had a bad crash of my computer that afterwards elog does not run correctly.  The problem appears to be that "localhost" (e.g., http://localhost:8080/) gets changed to a domain name (http://sylvester.columbia.edu:8080/) which is not registered.  I only want it to access this elog database locally on my machine and do not even want to set it up as a web server.         Re: localhost definition problem, posted by Stefan Ritt on Wed Jan 18 12:37:19 2006  Hi Jason, how is going? Long time no hear! What you need is following line in your config file:   Problem selecting ports, posted by Chris Warner on Fri Jan 13 03:21:32 2006  I had problems getting elog to run on port 8080 (or many others). I have it installed on Redhat Enterprise Linux rel 4. The only way I was able to get it working was using port 80. I would like to run it on a different port if possible but I'm not sure what is wrong.       Re: Problem selecting ports, posted by Chris Warner on Tue Jan 17 13:59:58 2006  Nevermind. this was an iptables issue. [quote="Chris Warner"]I had problems getting elog to run on port 8080 (or many others). I have it installed on Redhat Enterprise Linux rel 4. The only way I was able to get it working was using port 80. I would like to run it on a different port if possible but I'm not sure what is wrong.   LDAP, posted by Carl Shirey on Thu Jan 12 16:53:30 2006  I know you want to make ELOG a stand alone program.  But is there a way to still make a stand alone but have the option work with LDAP? FYI Elog works great we us it for our shift carryover and we have about 25 people useing it and I have heard no complants with it.       Re: LDAP, posted by Stefan Ritt on Thu Jan 12 17:02:21 2006  [quote="Carl Shirey"]I know you want to make ELOG a stand alone program.  But is there a way to still make a stand alone but have the option work with LDAP? FYI Elog works great we us it for our shift carryover and we have about 25 people useing it and I have heard no complants with it.          Re: LDAP, posted by Chris Warner on Fri Jan 13 02:37:10 2006  [quote="Stefan Ritt"][quote="Carl Shirey"]I know you want to make ELOG a stand alone program.  But is there a way to still make a stand alone but have the option work with LDAP? FYI   Thread sort / display order, posted by Michael Husbyn on Tue Nov 22 17:38:24 2005  Is there a way to choose the display order in threaded mode. Eg:       Re: Thread sort / display order, posted by Stefan Ritt on Thu Jan 12 16:06:16 2006  [quote="Michael Husbyn"]Is there a way to choose the display order in threaded mode. Eg:   Page browsing links in Find mode broken, posted by Yoshio Imai on Wed Jan 11 15:54:28 2006  Hi! We are having problems with the "Find" mode in the latest revision. When we used "Find" to search for specific texts, and the results span more than one       Re: Page browsing links in Find mode broken, posted by Stefan Ritt on Wed Jan 11 21:06:06 2006  Thanks for reporting this bug, I fixed it in revision 1597.          Side effects from debugging, posted by Yoshio Imai on Thu Jan 12 11:32:19 2006  [quote="Stefan Ritt"]Thanks for reporting this bug, I fixed it in revision 1597.[/quote] Thanks for your quick reaction! Unfortunately, there is one side effect. As far as I understand, you fixed the bug by preserving the command attributes [code]http://www.logbook.domain/logbook/pageN?command[/code]             Side effects from debugging, posted by Yoshio Imai on Thu Jan 12 11:38:13 2006  Addendum: in the Forum, I found a very strange effect: When deliberately highlighting an entry (http://midas.psi.ch/elogs/Forum/?id=1858), the Elog server no longer keeps the page partitioning, but displays ALL entries of the logbook. I don't know if these problems are related, but maybe you could check  (we use the "Full" mode for the list view, in case that matters). I have tried to reproduce the problem with our logbook in threaded mode, but we don't                Side effects from debugging, posted by Stefan Ritt on Thu Jan 12 15:50:51 2006  Both problems have been fixed in revision 1598.   Getting back from "Find" mode, posted by Yoshio Imai on Tue Nov 15 10:58:23 2005  Hi again! There is one question regarding the "Find" function of the elog. Clicking onto "Search" takes the user to the list view on only those entries that match       Re: Getting back from "Find" mode, posted by Stefan Ritt on Tue Nov 15 12:50:37 2005  [quote="Yoshio Imai"]There is one question regarding the "Find" function of the elog. Clicking onto "Search" takes the user to the list view on only those entries that match the search conditions. Since we use the list view in "Full" mode by default, this usually is enough to give us an overview of the event we looked for.       Re: Getting back from "Find" mode, posted by Stefan Ritt on Wed Jan 11 21:12:13 2006  [quote="Yoshio Imai"]Is there a more direct way to get back to the unfiltered list view than selecting an entry and go to "List" or using "Find" again and clicking on "Back"?[/quote]   Date imports from CSV incorrectly, posted by David Brody on Tue Jan 10 00:32:19 2006  When I import from a CSV file, dates formatted as mm/dd/yy always get imported as 12/31/1969 Here are the parameters I am using for dates:       Re: Date imports from CSV incorrectly, posted by David Brody on Tue Jan 10 19:30:09 2006  [quote="David Brody"]When I import from a CSV file, dates formatted as mm/dd/yy always get imported as 12/31/1969 Here are the parameters I am using for dates:   MS Fonts only in ELCode options?, posted by T. Ribbrock on Wed Jan 4 12:05:21 2006  I'm just after installing 2.6.0 and marvelling at all the changes, especially ELCode (I was using 2.5.8 previously). However, I noticed that the "FONT" menu for ELCodes only offers Microsoft fonts 8o - something I usually avoid like hell when publishing web content, as I cannot rely on those being installed on the clients. As far as I can see there is no easy way to change this, short of patching the source - or is there?       Re: MS Fonts only in ELCode options?, posted by Stefan Ritt on Mon Jan 9 20:53:28 2006  [quote="T. Ribbrock"]I'm just after installing 2.6.0 and marvelling at all the changes, especially ELCode (I was using 2.5.8 previously). However, I noticed that the "FONT" menu for ELCodes only offers Microsoft fonts 8o - something I usually avoid like hell when publishing web content, as I cannot rely on those being installed on the clients. As far as I can see there is no easy way to change this, short of patching the source - or is there?          Re: MS Fonts only in ELCode options?, posted by T. Ribbrock on Tue Jan 10 10:42:18 2006  [quote="Stefan Ritt"] In revision 1593 I implemented a "Fonts = ..." option where you can specify a list of fonts to be shown on the list. I tried however the MS set of fonts on a Linux system, and found that the MS fonts got mapped to Unix fonts in a reasonable way. Even the [FONT=comic sans ms]Comic Sans MS[/FONT] font was   HelpELCode needs to be present in "Menu commands"?, posted by T. Ribbrock on Wed Jan 4 12:26:31 2006  Another little issue I came across was this: I'm using "Menu commands" and "Guest Menu commands" in my configuration. When I logged in and started to create a new entry, clicking on the URL that is behind "ELCode" at the bottom of the screen (and accesses the help for the ELCodes) resulted in a "command denied". The only way to get around this was to add "HelpELCode" to "Menu commands" - but now it also shows up in the menus, which is not what I want. Is there       Re: HelpELCode needs to be present in "Menu commands"?, posted by Stefan Ritt on Mon Jan 9 20:19:32 2006  [quote="T. Ribbrock"]Another little issue I came across was this: I'm using "Menu commands" and "Guest Menu commands" in my configuration. When I logged in and started to create a new entry, clicking on the URL that is behind "ELCode" at the bottom of the screen (and accesses the help for the ELCodes) resulted in a "command denied". The only way to get around this was to add "HelpELCode" to "Menu commands" - but now it also shows up in the menus, which is not   "Logkook dir" in top group [global] section ineffective, posted by Yoshio Imai on Thu Nov 24 20:08:00 2005  Hi, it's me again! I have found one possible bug. We have declared top groups for our logbooks; one for administration and one for the shift logbooks. In the [global]-section       Re: "Logkook dir" in top group [global] section ineffective, posted by Yoshio Imai on Fri Nov 25 14:05:08 2005  OK, I found the note about "Logbook dir" in Stephen Wood's entry (http://midas.psi.ch/elogs/Forum/1101) ;)       Re: "Logkook dir" in top group [global] section ineffective, posted by Stefan Ritt on Thu Dec 22 20:50:57 2005  [quote="Yoshio Imai"]There are also one question/request (you see that we use the elog extensively now ;)): When searching for a particular event in our shift log using the "Find" function, it would often be useful not to go to the single entry, but to the page where that entry resides. This way we can see the whole context of the event. When clicking onto an entry in the "Find" result page, this takes us of course          Re: "Logkook dir" in top group [global] section ineffective, posted by Yoshio Imai on Wed Jan 4 15:27:31 2006  [quote="Stefan Ritt"]I implemented that request. When you click on "list", it takes you to the listing page containing the current entry, which is even highlighted. Have a look at this forum if this is what you like.[/quote]             Re: "Logkook dir" in top group [global] section ineffective, posted by Stefan Ritt on Mon Jan 9 20:09:16 2006  [quote="Yoshio Imai"]One strange thing (maybe it isn't strange at all) is the following behaviour: when the list view is set to "summary", then the line containing the entry where we clicked "list" is highlighted, however when the list view is set to "full", it isn't. Is this "a bug, or a feature"? ;)[/quote]   elogd 2.6.0 crash on password Forgot?, posted by Mike on Tue Jan 3 17:20:16 2006  I have been having a repeatable crash on V2.6.0 everytime someone tries to recover a password using the option from the login screen.  See attachment for a jpg of the message.     "Syntax of elogd.cfg" - Document, posted by Edmundo T Rodriguez on Thu Dec 22 21:15:19 2005  The document "ELOG - Syntax of elogd.cfg" is outdated! Are we going to have an updated documented?       Re: "Syntax of elogd.cfg" - Document, posted by Stefan Ritt on Fri Dec 23 09:07:14 2005  [quote="Edmundo T Rodriguez"]The document "ELOG - Syntax of elogd.cfg" is outdated![/quote] I forgot to update the web server, but the document distributed in the 2.6.0 package was up to date.   Maximum number of LogBooks? Bug?, posted by Mike on Thu Dec 22 14:32:00 2005  Is there a Maximum number logbooks?   I have run into a problem but I'm not sure if to call it a Bug or not.  We have started using Elog to keep a work log for each of our production servers.       Re: Maximum number of LogBooks? Bug?, posted by Stefan Ritt on Thu Dec 22 15:14:39 2005  [quote="Mike"]Is there a Maximum number logbooks?   I have run into a problem but I'm not sure if to call it a Bug or not.  We have started using Elog to keep a work log for each of our production servers.          Re: Maximum number of LogBooks? Bug?, posted by Mike on Thu Dec 22 15:39:23 2005  [quote="Stefan Ritt"] You're really pushing to the limit ;)   New docs?, posted by PJ Meyer on Thu Dec 22 01:17:12 2005  Just looked at change log for 2.6 was wondering where the documentation for the new additions/changes is/are.       Re: New docs?, posted by Stefan Ritt on Thu Dec 22 08:58:25 2005  [quote="PJ Meyer"]Just looked at change log for 2.6 was wondering where the documentation for the new additions/changes is/are.[/quote]   Compile on Windows?, posted by Mike on Wed Dec 21 23:52:27 2005  What version of Visual Studio do you use for compile Elog on windows. I have downloaded the Tar from svn and am having some errors, but then I've go VS.Net 2003. I wondering if this was done with 6.0?       Re: Compile on Windows?, posted by Stefan Ritt on Thu Dec 22 08:53:43 2005  [quote="Mike"]What version of Visual Studio do you use for compile Elog on windows. I have downloaded the Tar from svn and am having some errors, but then I've go VS.Net 2003. I wondering if this was done with 6.0?[/quote]   Proxy question, posted by Jesse Wodin on Wed Dec 7 02:37:40 2005  I'm trying to run elog 2.6.0-beta4 under Apache 2.0.  I follow the directions, and everything works fine, so my elog runs as       Re: Proxy question, posted by Stefan Ritt on Wed Dec 21 20:59:26 2005  > I'm trying to run elog 2.6.0-beta4 under Apache 2.0.  I follow the directions, and everything works fine, so my > elog runs as >    2.6.0-bata5, posted by Carl Shirey on Sat Dec 10 02:01:33 2005  Do you have 2.6.0-bata5 for linux as setup for RPM install.  I was able to locate the version for windows but not for linux. Thanks for your help.       Re: 2.6.0-bata5, posted by Stefan Ritt on Wed Dec 21 20:39:52 2005  [quote="Carl Shirey"]Do you have 2.6.0-bata5 for linux as setup for RPM install.  I was able to locate the version for windows but not for linux. Thanks for your help.[/quote]   duplicate & presets, posted by Willem Koster on Mon Dec 12 15:17:39 2005  I'm (mis)using elog as a database. I like the fact that I can have presets for fields, but I also like the fact  that I can make a duplicate of an entry. Now when I make a duplicate, all the fields get overwritten with the  preset-value. Is there a way to get the preset-values only on entering a NEW reord and NOT on a duplicate ?       Re: duplicate & presets, posted by Stefan Ritt on Wed Dec 21 20:24:14 2005  > I'm (mis)using elog as a database. I like the fact that I can have presets for fields, but I also like the fact  > that I can make a duplicate of an entry. Now when I make a duplicate, all the fields get overwritten with the  > preset-value. Is there a way to get the preset-values only on entering a NEW reord and NOT on a duplicate ?   Howto insert screen dumps into an elog entry, posted by Stefan Ritt on Tue Dec 20 11:17:17 2005  With the new ELCode tags, one can insert screen dumps pretty easy into elog entries. I personally use HoverSnap 0.8 under Windows, there are similar tools under Linux. HoverSnap puts a "Capture.jpg" file in a selectable directoy when you press [B]PrintScreen[/B], then you can instert this file with the [IMG]elog:1556/1[/IMG] button. Here is such a screendump example:   Shell substitution, especially interesting for running online experiments, posted by Stefan Ritt on Tue Dec 20 09:18:19 2005  Shell substitution has been introduced in an experimental state of the current SVN version of ELOG. It woks such that the subsititution list can contain [B]$shell(<argument>)[/B] commands. The [B]<argument>[/B] is passed to the shell of the operating system and the result is captured and subsituted. This is handy for online experiments, where one wants to pass information automatically to elog. Assume that there is a file /tmp/runnumber containing the current   Bad date format., posted by Alex H on Thu Dec 15 15:33:04 2005  Hi Stefan, I have two loogbook who are using the [B]Type [/B]Derniere image = [B]Date[/B] parameter, but I obtain a big        Re: Bad date format., posted by Stefan Ritt on Thu Dec 15 17:33:39 2005  [quote="Alex H"] [Liste]          Re: Bad date format., posted by Alex H on Mon Dec 19 09:41:08 2005  [quote="Stefan Ritt"][quote="Alex H"] [Liste]   New ELOG version 2.6.0, posted by Stefan Ritt on Thu Dec 15 13:08:35 2005  Dear ELOG users, I'm happy to announce the release of ELOG version 2.6.0. After a long period of beta testing, all functions are now sufficiently stable for a public release.   Logbook aliases, posted by Yoshio Imai on Tue Dec 13 10:51:13 2005  Hi! Is it possible to implement aliases for logbooks? We would like to use a new logbook for every beamtime, but many services need to read/write to the respective       Re: Logbook aliases, posted by Stefan Ritt on Tue Dec 13 20:34:39 2005  [quote="Yoshio Imai"]Is it possible to implement aliases for logbooks? We would like to use a new logbook for every beamtime, but many services need to read/write to the respective current beamtime logbook. It would therefore be nice to have logbook "aliases", so that e.g. a "virtual" logbook [I]beam[/I] could be defined to be an alias/redirection to the current beamtime logbook, and all services could refer to that one instead of having to be reconfigured          Re: Logbook aliases, posted by Yoshio Imai on Wed Dec 14 11:40:54 2005  Ok, we will try this. In our case, the "symlink"-type logbook might have been nice because of our daily backup routines. If we move the data of the old logbook to the newly             Re: Logbook aliases, posted by Stefan Ritt on Wed Dec 14 11:48:37 2005  [quote="Yoshio Imai"]but maybe you can add this to the wishlist if others request the same...[/quote] Ok, I will do that.                Re: Logbook aliases, posted by Yoshio Imai on Wed Dec 14 15:45:29 2005  [quote="Stefan Ritt"] If you click "List" on the single entry page, it takes you by default to the listing page.[/quote] I also think this is the best way to do it.   Upgrade from 2.3.8 to 2.6.0 logbook problem, posted by Jesse Wodin on Sat Dec 3 23:32:13 2005  Hi, I'd like to upgrade from an old version of elog 2.3.8 to 2.6.0. I installed the new version, and it runs fine, but it doesn't seem to see my old logbooks (the path in the conf file is correct).  Do I have to upgrade my logbooks somehow?       Re: Upgrade from 2.3.8 to 2.6.0 logbook problem, posted by Stefan Ritt on Mon Dec 5 17:11:33 2005  [quote="Jesse Wodin"]Hi, I'd like to upgrade from an old version of elog 2.3.8 to 2.6.0. I installed the new version, and it runs fine, but it doesn't seem to see my old logbooks (the path in the conf file is correct).  Do I have to upgrade my logbooks somehow?[/quote]          Re: Upgrade from 2.3.8 to 2.6.0 logbook problem, posted by Jesse Wodin on Wed Dec 7 02:32:00 2005  Thanks, you were right, it was just a permissions problem on the logbooks, which I had copied over as root. j.   Upgrading from ELOG V2.5.6-1 to ELOG V2.5.9 steps, posted by Rob de Bruin on Fri Dec 2 11:46:11 2005  Hello, Were still running (stable) Elog version V2.5.6-1.       Re: Upgrading from ELOG V2.5.6-1 to ELOG V2.5.9 steps, posted by Stefan Ritt on Fri Dec 2 12:27:47 2005  [quote="Rob de Bruin"]We whant to upgrade to the latest version, can i just install the latest version over my older version?? I wil backup etc. offcourse.[/quote]   Email format flags, posted by Elaine Cristina Franchini dos Anjos on Tue Nov 22 20:22:04 2005  I've been tried to format our email notification messages  like this forum, but I couldn't.       Re: Email format flags, posted by Stefan Ritt on Thu Nov 24 08:27:01 2005  [quote="Elaine Cristina Franchini dos Anjos"]I've been tried to format our email notification messages  like this forum, but I couldn't.   Undesirable TAG { }, posted by Alex H on Mon Nov 21 11:49:52 2005  Hi, I'am using ELOG v2.6.0-beta1 on Windows 2000. I'am using Conditional attributes and obtain in certain case undesirable {x} TAG.        Re: Undesirable TAG { }, posted by Stefan Ritt on Tue Nov 22 09:00:42 2005  That problem was fixed on June 24th, 2005. So please upgrade to the current 2.6.0-beta5 version.          Re: Undesirable TAG { }, posted by Alex H on Tue Nov 22 11:35:56 2005  [quote="Stefan Ritt"]That problem was fixed on June 24th, 2005. So please upgrade to the current 2.6.0-beta5 version.[/quote] Updated ! Thanks    Add Button on calendar, posted by Alex H on Mon Nov 21 12:00:05 2005  Hi Stefan, Could you add a "Today button" on the calendar to set immediatly the date of today on a date type field ?       Re: Add Button on calendar, posted by Stefan Ritt on Mon Nov 21 13:01:21 2005  [quote="Alex H"]Could you add a "Today button" on the calendar to set immediatly the date of today on a date type field ?[/quote] "Today" is selected by default if you pop-up a new calendar, so just click on the selected day.          Re: Add Button on calendar, posted by Alex H on Mon Nov 21 14:19:22 2005  [quote="Stefan Ritt"][quote="Alex H"]Could you add a "Today button" on the calendar to set immediatly the date of today on a date type field ?[/quote] "Today" is selected by default if you pop-up a new calendar, so just click on the selected day.[/quote]             Re: Add Button on calendar, posted by Stefan Ritt on Mon Nov 21 17:54:54 2005  [quote="Alex H"]I don't have the today date highlighted so I don't have some visual effect to find the date immediatly. Is it a bug or other ?[/quote] If I click [i]Find[/i] on this page, then click on an calendar, I get following picture:             Re: Add Button on calendar, posted by Alex H on Tue Nov 22 09:49:30 2005  [quote="Stefan Ritt"][quote="Alex H"]I don't have the today date highlighted so I don't have some visual effect to find the date immediatly. Is it a bug or other ?[/quote]          Re: Add Button on calendar, posted by Stefan Ritt on Mon Nov 21 17:54:54 2005  [quote="Alex H"]I don't have the today date highlighted so I don't have some visual effect to find the date immediatly. Is it a bug or other ?[/quote] If I click [i]Find[/i] on this page, then click on an calendar, I get following picture:   Passive elog mirrors, posted by Yoshio Imai on Fri Nov 18 19:57:03 2005  Hi! Is it possible to install a "passive" elog mirror? We want to allow members of another institute to browse our logbook, but the connection is rather slow.       Re: Passive elog mirrors, posted by Stefan Ritt on Fri Nov 18 21:48:33 2005  [quote="Yoshio Imai"]Is it possible to install a "passive" elog mirror? We want to allow members of another institute to browse our logbook, but the connection is rather slow. The idea is now to set up an elog mirror at their site for faster access. Still, we should be the only ones who can add and edit the entries, so the update mechanism needs to be restricted in one direction. Is this possible at all? I didn't find any clues on that in the documentation ...[/quote]          Re: Passive elog mirrors, posted by Yoshio Imai on Mon Nov 21 14:35:20 2005  Thanks, I will try it with one of these methods.   Automatic creation of new entry in another logbook, posted by Carlos Mateo on Thu Nov 17 11:50:45 2005  Hi I am trying to create an entry in logbook2 when I submit a new entry in logbook1.  The automatically created entry in logbook2 will have a reference to       Re: Automatic creation of new entry in another logbook, posted by Stefan Ritt on Fri Nov 18 21:03:03 2005  [quote="Carlos Mateo"]I am trying to create an entry in logbook2 when I submit a new entry in logbook1.  The automatically created entry in logbook2 will have a reference to the entry that created it.[/quote]          Re: Automatic creation of new entry in another logbook, posted by Carlos Mateo on Mon Nov 21 10:41:46 2005  [quote="Stefan Ritt"][quote="Carlos Mateo"]I am trying to create an entry in logbook2 when I submit a new entry in logbook1.  The automatically created entry in logbook2 will have a reference to the entry that created it.[/quote]   Changing width in entry mode, posted by Ulrich Trüssel on Fri Nov 18 10:53:26 2005  I'd like to change the width of the display when entering a new record. But I didn't find the right way after trying some time: Problem: see pic "Eingabe.jpg", if thre are more MOptions to select in entry mode, I have to scroll from right to left all the time. Ti s isn't really       Re: Changing width in entry mode, posted by Stefan Ritt on Fri Nov 18 21:30:44 2005  [quote="Ulrich Trüssel"]Problem: see pic "Eingabe.jpg", if thre are more MOptions to select in entry mode, I have to scroll from right to left all the time. Ti s isn't really comfortable.[/quote]          Re: Changing width in entry mode, posted by Ulrich Trüssel on Sat Nov 19 11:57:49 2005  [quote="Stefan Ritt"][quote="Ulrich Trüssel"]Problem: see pic "Eingabe.jpg", if thre are more MOptions to select in entry mode, I have to scroll from right to left all the time. Ti s isn't really comfortable.[/quote]       Re: Changing width in entry mode, posted by Ulrich Trüssel on Sat Nov 19 11:57:49 2005  [quote="Stefan Ritt"][quote="Ulrich Trüssel"]Problem: see pic "Eingabe.jpg", if thre are more MOptions to select in entry mode, I have to scroll from right to left all the time. Ti s isn't really comfortable.[/quote]   Send a email to E-log?, posted by Dinesh Bapat on Fri Nov 18 08:40:13 2005  Is it possible to send an email to Elog and record an entry automatically? We have situations where endusers have very narrow bandwidth email access. But no broadband to update E-log. Is there some mechanism so that they can send       Re: Send a email to E-log?, posted by Stefan Ritt on Fri Nov 18 21:09:01 2005  [quote="Dinesh Bapat"]Is it possible to send an email to Elog and record an entry automatically?[/quote] Have a look at elog:Contributions/10   page2?cmd=List does not show next page, posted by Oleg Solovyanov on Tue Nov 15 08:35:33 2005  Maybe I'm doing something wrong, but the following does not work on a Elog with multiple pages: 1. View message       Re: page2?cmd=List does not show next page, posted by Stefan Ritt on Tue Nov 15 08:40:31 2005  [quote="Oleg Solovyanov"]Maybe I'm doing something wrong, but the following does not work on a Elog with multiple pages: 1. View message          Re: page2?cmd=List does not show next page, posted by Oleg Solovyanov on Wed Nov 16 15:24:53 2005  [quote="Stefan Ritt"][quote="Oleg Solovyanov"]Maybe I'm doing something wrong, but the following does not work on a Elog with multiple pages: 1. View message             Re: page2?cmd=List does not show next page, posted by Stefan Ritt on Wed Nov 16 15:27:40 2005  [quote="Oleg Solovyanov"]Somehow in my logbooks List command would add cmd=List to the URL And this does not work...[/quote]                Re: page2?cmd=List does not show next page, posted by Oleg Solovyanov on Thu Nov 17 23:40:10 2005  [quote="Stefan Ritt"][quote="Oleg Solovyanov"]Somehow in my logbooks List command would add cmd=List to the URL And this does not work...[/quote]   Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:15:33 2005  Hi again! I have one question concerning the logbook configuration. Normally, clicking on "List" takes me to the first page of the list view. Is it possible to configure the logbook so that "List" takes me to the last page instead?       Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 12:16:38 2005  [quote="Yoshio Imai"]Is it possible to configure the logbook so that "List" takes me to the last page instead?[/quote] Reverse sort = 1          Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 12:39:44 2005  [quote="Stefan Ritt"] Reverse sort = 1[/quote]             Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:05:26 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] Start page = 0?cmd=last                Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:12:46 2005  Thanks! For the moment, I could satisfy the users by setting the start page to the "All" view, but if it can be implemented in a future version, this would come very handy.                Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 13:14:19 2005  [quote="Yoshio Imai"]We would like to see the entries in normal order, but the last of the pages as "start page". Is it possible to configure this?[/quote] What about                   Re: Display last page by default, posted by Yoshio Imai on Fri Oct 28 13:24:27 2005  [quote="Stefan Ritt"] What about Start page = last10                      Re: Display last page by default, posted by Stefan Ritt on Fri Oct 28 20:36:55 2005  Ok, I implemented the last page display per default in revision 1538. If "reverse sort = 0" the last page is shown and if "reverse sort = 1" the first page is shown by default. This way one always sees the page with the latest entries. I hope this accomodates everybody. If not, please complain and I could make it a switch (yet another option ;( ).                         Re: Display last page by default, posted by Yoshio Imai on Mon Oct 31 01:39:52 2005  I have installed the new version, and it works just fine. It is also MUCH faster than my intermediate solution. [quote] For the moment, I could satisfy the users by setting the start page to the "All" view   Conditional hiding of attributes in list view, posted by Yoshio Imai on Thu Sep 22 11:34:46 2005  Hi! All here are amazed by how quickly this software has evolved since we       Re: Conditional hiding of attributes in list view, posted by Yoshio Imai on Thu Oct 13 11:40:32 2005  Hi again! I noticed the quickfilter option in the config guide in the meantime ;-)!          Re: Conditional hiding of attributes in list view, posted by Stefan Ritt on Thu Oct 13 14:08:26 2005  [quote="Yoshio Imai"]I noticed the quickfilter option in the config guide in the meantime ;-)![/quote] Sorry my late reply, I'm extremely busy these days. I still don't get the point where you want attributes to be hidden. Let's assume you have a logbook             Re: Conditional hiding of attributes in list view, posted by Yoshio Imai on Thu Oct 13 14:47:06 2005  [quote="Stefan Ritt"] Of course you can put a separate tile line each time you switch from "one" to "two", but that costs a lot of space. So how would you layout a listing where different attribute sets are mixed?       Re: Conditional hiding of attributes in list view, posted by Stefan Ritt on Fri Oct 28 23:45:33 2005  [quote="Yoshio Imai"]I have also found one possible problem, maybe it's already solved in the newest version: We have set up the elog under an stunnel, but the elog server also responds to the original port (i.e. 80), displaying the logbook          Re: Conditional hiding of attributes in list view, posted by Yoshio Imai on Mon Oct 31 01:36:52 2005  Thank you! I have tested it and it works just as expected!   Preset text overriden after preview, posted by Yoshio Imai on Wed Oct 26 16:00:00 2005  Hi, Stefan! I have run across a problem with preset texts. We have defined a form to be filled in when the operator selects a specific combination of attributes. This       Re: Preset text overriden after preview, posted by Stefan Ritt on Wed Oct 26 16:17:18 2005  [quote="Yoshio Imai"]This form appears correctly, but after filling in the form, clicking on "Preview" leads to an error: the preview text is correct, but the actual text entry field is overriden again with the empty form.[/quote]          Re: Preset text overriden after preview, posted by Yoshio Imai on Fri Oct 28 10:42:44 2005  [quote="Stefan Ritt"] Thanks for reporting this bug. It's fixed in revision 1534.   Login screen reappears after correct login, posted by Daniel Broers on Mon Oct 24 14:19:18 2005  We are running elog perfectly on a solaris machine for some time now.  Except on some client pc's the login screen keeps reappearing after a succesfull login. We upgraded to version 2.6.0 beta 4 but the problem persists.       Re: Login screen reappears after correct login, posted by Stefan Ritt on Mon Oct 24 14:30:48 2005  [quote="Daniel Broers"]We are running elog perfectly on a solaris machine for some time now.  Except on some client pc's the login screen keeps reappearing after a succesfull login. We upgraded to version 2.6.0 beta 4 but the problem persists.          Re: Login screen reappears after correct login, posted by Daniel Broers on Mon Oct 24 14:50:58 2005  [quote="Stefan Ritt"][quote="Daniel Broers"]We are running elog perfectly on a solaris machine for some time now.  Except on some client pc's the login screen keeps reappearing after a succesfull login. We upgraded to version 2.6.0 beta 4 but the problem persists.             Re: Login screen reappears after correct login, posted by Stefan Ritt on Mon Oct 24 15:18:46 2005  [quote="Daniel Broers"]No, cookies are enabled. [/quote] Can you                Re: Login screen reappears after correct login, posted by Daniel Broers on Mon Oct 24 16:20:37 2005  [quote="Stefan Ritt"] Can you [LIST]                   Re: Login screen reappears after correct login, posted by Stefan Ritt on Mon Oct 24 16:41:20 2005  [quote="Daniel Broers"]Output in attachment[/LIST][/quote] Your output shows:                      Re: Login screen reappears after correct login, posted by Daniel Broers on Mon Oct 24 17:14:59 2005  [quote="Stefan Ritt"][quote="Daniel Broers"]Output in attachment[/LIST][/quote] Your output shows:                         Re: Login screen reappears after correct login, posted by Stefan Ritt on Mon Oct 24 19:33:41 2005  [quote="Daniel Broers"]But why would one client have problems while others don't?[/quote] You had the login expiration at 1 hour, and the time was off by one hour I guess. But each client's time is only accurate to a few minutes, so some of   Howto force users to supply an email address when registering?, posted by Johan Nyberg on Thu Oct 20 14:15:14 2005  Hi, Today I noticed that a user had registered without supplying an email address. I am using Self Register = 3, which means I recieve an email from elogd       Re: Howto force users to supply an email address when registering?, posted by Stefan Ritt on Thu Oct 20 16:01:49 2005  [quote="Johan Nyberg"]Is there a way to force the users to supply an email address when they register?[/quote] I will happily implement such an email check if you supply me further information. Presume you enter an email address in the form user#domain.com (# instead          Re: Howto force users to supply an email address when registering?, posted by Johan Nyberg on Sat Oct 22 00:21:03 2005  [quote="Stefan Ritt"][quote="Johan Nyberg"]Is there a way to force the users to supply an email address when they register?[/quote] I will happily implement such an email check if you supply me further information. Presume you enter an email address in the form user#domain.com (# instead   Error message: "Attachment #6 of entry #0 not found", posted by Christian Schult on Sun Oct 16 10:33:23 2005  Hi all, I get messages like this Attachment #16 of entry #0 not found       Re: Error message: "Attachment #6 of entry #0 not found", posted by Stefan Ritt on Mon Oct 17 10:18:29 2005  > Hi all, I get messages like this > Attachment #16 of entry #0 not found > Please use your browser's back button to go back          Re: Error message: "Attachment #6 of entry #0 not found", posted by Christian Schult on Tue Oct 18 08:02:44 2005  > > Hi all, I get messages like this  > > Attachment #16 of entry #0 not found  > > Please use your browser's back button to go back              Re: Error message: "Attachment #6 of entry #0 not found", posted by Stefan Ritt on Tue Oct 18 08:04:29 2005  > This is the URL after logging in:  > http://localhost:8081/debian/17?cmd=List&mode=summary  >                  Re: Error message: "Attachment #6 of entry #0 not found", posted by Charles Duncan on Tue Oct 18 18:13:57 2005  > > This is the URL after logging in:  > > http://localhost:8081/debian/17?cmd=List&mode=summary  > >                     Re: Error message: "Attachment #6 of entry #0 not found", posted by Charles Duncan on Wed Oct 19 15:44:07 2005  > > > This is the URL after logging in:  > > > http://localhost:8081/debian/17?cmd=List&mode=summary  > > >     How to connect to an ELOG server running behind apache+ssl using the elog command line program?, posted by Johan Nyberg on Sat Oct 15 16:50:25 2005  Hi, I need to post a large number of "old" messages to one of my logbooks and I am trying to modify the script doelog (see http://midas.psi.ch/elogs/Contributions/10)       Re: How to connect to an ELOG server running behind apache+ssl using the elog command line program?, posted by Stefan Ritt on Mon Oct 17 10:20:31 2005  [quote="Johan Nyberg"]I need to post a large number of "old" messages to one of my logbooks and I am trying to modify the script doelog (see http://midas.psi.ch/elogs/Contributions/10) to suit my needs. I am using apache + ssl for secure logins to my ELOG server. The doelog script uses the elog utility program, which is useful for posting ELOG messages from scripts or from the command line. My problem is that I cannot talk to my ELOG server with elog.[/quote]          Re: How to connect to an ELOG server running behind apache+ssl using the elog command line program?, posted by Johan Nyberg on Mon Oct 17 11:07:10 2005  [quote="Stefan Ritt"][quote="Johan Nyberg"]I need to post a large number of "old" messages to one of my logbooks and I am trying to modify the script doelog (see http://midas.psi.ch/elogs/Contributions/10) to suit my needs. I am using apache + ssl for secure logins to my ELOG server. The doelog script uses the elog utility program, which is useful for posting ELOG messages from scripts or from the command line. My problem is that I cannot talk to my ELOG   New Accounts, posted by Carl Shirey on Thu Oct 13 19:15:48 2005  I hope you can help me Stefan. The problem that I am having is when someone request a account on elog I received e-mail message to activate there account.  I click on the link from my e-mail to activate the account it takes me to the logon page. I log on and then I get a massage that the web does not exist.       Re: New Accounts, posted by Stefan Ritt on Thu Oct 13 21:26:31 2005  [quote="Carl Shirey"]I hope you can help me Stefan. The problem that I am having is when someone request a account on elog I received e-mail message to activate there account.  I click on the link from my e-mail to activate the account it takes me to the logon page. I log on and then I get a massage that the web does not exist.          Re: New Accounts, posted by Carl Shirey on Fri Oct 14 19:20:40 2005  [quote="Stefan Ritt"][quote="Carl Shirey"]I hope you can help me Stefan. The problem that I am having is when someone request a account on elog I received e-mail message to activate there account.  I click on the link from my e-mail to activate the account it takes me to the logon page. I log on and then I get a massage that the web does not exist.   Next ELOG Release ?, posted by Alex H on Fri Oct 14 11:06:30 2005  Hello Stefan, Did you have a release Date for Elog V2.6.0 ? Thanks in Advance.       Re: Next ELOG Release ?, posted by Stefan Ritt on Fri Oct 14 11:07:40 2005  > Hello Stefan, > Did you have a release Date for Elog V2.6.0 ? > Thanks in Advance.          Re: Next ELOG Release ?, posted by Alex H on Fri Oct 14 11:28:28 2005  > > Hello Stefan, > > Did you have a release Date for Elog V2.6.0 ? > > Thanks in Advance.   Long lines in printout, posted by Bertram Metz on Wed Aug 10 10:50:55 2005  Hi, long lines in an entry are not printed correctly (the lines are cut off), if the text is encoded as plain text. This works correctly, if the text is encoded       Re: Long lines in printout, posted by Stefan Ritt on Mon Sep 5 20:39:15 2005  > long lines in an entry are not printed correctly (the lines are cut off), if the text is encoded as plain > text. This works correctly, if the text is encoded as ELCode. I tried this with Firefox and Internet Explorer. > Does anybody know a solution for this?           Re: Long lines in printout, posted by Bertram Metz on Mon Sep 12 10:44:51 2005  > > long lines in an entry are not printed correctly (the lines are cut off), if the text is encoded as plain > > text. This works correctly, if the text is encoded as ELCode. I tried this with Firefox and Internet Explorer. > > Does anybody know a solution for this?              Re: Long lines in printout, posted by Stefan Ritt on Tue Sep 13 13:33:59 2005  Your problem is related with the fact that I changed the formatting from fixed font to proportional font ("ELCode"). This gives you three options: [LIST]                Re: Long lines in printout, posted by Bertram Metz on Thu Oct 13 10:56:29 2005  Hi Stefan, I tried your suggestions with 'page shrinking' and 'message width', but they didn't help. What I do not understand is why this problem occurs only if the message text is formatted as plain text. The lines are printed correctly, if the text is formatted as EL code or as HTML.                    Re: Long lines in printout, posted by Stefan Ritt on Thu Oct 13 11:19:09 2005  Ok, I found the problem. In the default.css file, you will find a section [code].messagepre {                      Re: Long lines in printout, posted by Bertram Metz on Thu Oct 13 13:27:02 2005  The lines are still cut, if printed on paper. I played again with the 'message width' parameter, which actually the key parameter in my problem. I saw in the source, that the default value is now 112, but it was 76 in the elog version we'd used previously (V2.5.2). If I set 'message width' to 76 again, it works fine for new entries!                          Re: Long lines in printout, posted by Stefan Ritt on Thu Oct 13 13:51:55 2005  [quote="Bertram Metz"]The lines are still cut, if printed on paper.[/quote] Are you sure? After you change the CSS file, you have to reload the page. I just tried with the very long entry from this thread and got in the Firefox                            Re: Long lines in printout, posted by Bertram Metz on Thu Oct 13 17:45:58 2005  You're right. I don't know what I've tested this afternoon ;) Without the fixed font the text might get very small, if the line is too long. I think we'll set 'message width' = 76.   Trying to remove "mailto:" from the email address, posted by Matt Kimball on Wed Oct 12 23:59:13 2005  We are using ver 2.5.4.  As users enter new requests into the system, they would like email notifications.  I have added the $user_email into a "notifications" section that we created.  The email address that gets entered is "\mailto:user@domain.com".  Is there a way to remove the "\mailto:"?  Attached is my config file.       Re: Trying to remove "mailto:" from the email address, posted by Stefan Ritt on Thu Oct 13 08:32:20 2005  [quote="Matt Kimball"]We are using ver 2.5.4.  As users enter new requests into the system, they would like email notifications.  I have added the $user_email into a "notifications" section that we created.  The email address that gets entered is "\mailto:user@domain.com".  Is there a way to remove the "\mailto:"?  Attached is my config file.[/quote]   elog fails to connect with "cannot get host name: Success" message, posted by ScottK on Fri Sep 23 17:27:40 2005  I can't seem to connect using elog:      elog -h <myhost>:8080 -v -l Servers -a "Type=Routine" -a "Author=ScottK" -m ~/test.txt          Re: elog fails to connect with "cannot get host name: Success" message, posted by Stefan Ritt on Wed Oct 5 13:24:52 2005  [quote="ScottK"]I can't seem to connect using elog:      elog -h <myhost>:8080 -v -l Servers -a "Type=Routine" -a "Author=ScottK" -m ~/test.txt             Re: elog fails to connect with "cannot get host name: Success" message, posted by ScottK on Tue Oct 11 15:09:42 2005  [quote="Stefan Ritt"][quote="ScottK"]I can't seem to connect using elog:      elog -h <myhost>:8080 -v -l Servers -a "Type=Routine" -a "Author=ScottK" -m ~/test.txt      Cannot submit admin password while logbook is named in Chinese, posted by Exaos Lee on Sun Oct 9 20:43:31 2005  As the title.        Re: Cannot submit admin password while logbook is named in Chinese, posted by Stefan Ritt on Mon Oct 10 14:01:14 2005  [quote="Exaos Lee"]As the title. [/quote] There is no possibility to change an admin password. You probably mean that you logged in as admin and cannot change your own password, is that right?          Re: Cannot submit admin password while logbook is named in Chinese, posted by Exaos Lee on Mon Oct 10 19:33:05 2005  [quote="Stefan Ritt"][quote="Exaos Lee"]As the title. [/quote] There is no possibility to change an admin password. You probably mean that you logged in as admin and cannot change your own password, is that right?             Re: Cannot submit admin password while logbook is named in Chinese, posted by Stefan Ritt on Tue Oct 11 09:24:12 2005  [quote="Exaos Lee"]Sorry for my poor English. The case is like this: When I set an admin password for my logbook which is named in Chinese, I cannot open the config page while the password is correct. It seems that the logbook named in Chinese cannot recieve the password submitted. If the logbook is named other than Chinese, everything is OK. I will repeat the problem and describe it more exactly.[/quote]   Some spell mistakes, posted by Exaos Lee on Sun Oct 9 20:49:41 2005  I find some new strings from the warnings like this: [quote]Language error: string "HelpELCode" not found for language "chinese"[/quote]       Re: Some spell mistakes, posted by Stefan Ritt on Mon Oct 10 14:09:49 2005  [quote="Exaos Lee"]I find some new strings from the warnings like this: [quote]Language error: string "HelpELCode" not found for language "chinese"[/quote]          Re: Some spell mistakes, posted by Exaos Lee on Mon Oct 10 19:26:35 2005  [quote] Ok, fixed in the current subversion repository. Better write such things by personal mail to me, since it might not interest the elog community very much.[/quote] Sorry. ;-) I will mail you first next time.    Install error on MacOS X, posted by Exaos Lee on Mon Oct 10 19:22:51 2005  Executing "make" on MacOS X is OK, but "make install" failed due to the following error: [code] /usr/bin/install -m 0755 -d /usr/local/bin /usr/local/sbin /usr/local/man/man1/ /usr/local/man/man8/   Display Attribute no longer works in Beta 5?, posted by Ulrich Trüssel on Fri Oct 7 08:53:00 2005  Just changed from Beta 2 to Beta 5: I'm using Display Attribut = [elog:$logbook/$message id] as a reference link for other entries (ex.: Display Referenz = [elog:$logbook/$message id]). also       Re: Display Attribute no longer works in Beta 5?, posted by Stefan Ritt on Mon Oct 10 13:57:20 2005  [quote="Ulrich Trüssel"]I'm using Display Attribut = [elog:$logbook/$message id] as a reference link for other entries (ex.: Display Referenz = [elog:$logbook/$message id]). also see the attached elogd.cfg file.[/quote]   The Chinese Language,Demo Configuration and Help Files, posted by Exaos Lee on Sun Oct 9 20:18:23 2005  Hi, Stefan, The days from Oct.1~7 are our Nation Day's vacation, so I delayed the translation to Chinese. I just finished these files today: [list=1]       Re: The Chinese Language,Demo Configuration and Help Files, posted by Stefan Ritt on Mon Oct 10 12:53:46 2005  [quote="Exaos Lee"]I want to make elogd display the date in Chinese format. Please tell me howto.[/quote] Thank you for the files.   "Error: Cannot find hostname", posted by Exaos Lee on Sun Oct 9 20:39:50 2005  I usually access hosts in LAN with their IPs. But elogd seems to prefer hostnames to IPs. I cannot ask each one to add the hostname to their system config file while they visit my host. I encounter several problems which seems to be related to the hostname resolution: [list]       Re: "Error: Cannot find hostname", posted by Stefan Ritt on Mon Oct 10 08:03:57 2005  [quote="Exaos Lee"]I usually access hosts in LAN with their IPs. But elogd seems to prefer hostnames to IPs. I cannot ask each one to add the hostname to their system config file while they visit my host. I encounter several problems which seems to be related to the hostname resolution: [list]          Re: "Error: Cannot find hostname", posted by Exaos Lee on Mon Oct 10 10:52:02 2005  Yes, the "URL" works. Thanks!   ELOG repository moved from CVS to Subversion, posted by Stefan Ritt on Fri Oct 7 17:18:32 2005  The elog repository has been moved from CVS to Subversion for various reasons. Those people who accessed the CVS repository in the past now have to do it in one of two different ways: [LIST]       Re: ELOG repository moved from CVS to Subversion, posted by Exaos Lee on Sat Oct 8 05:08:40 2005  Hi, Stefan,  I cannot checkout due to the following error: ------------          Re: ELOG repository moved from CVS to Subversion, posted by Stefan Ritt on Sat Oct 8 08:44:22 2005  [quote="Exaos Lee"]Hi, Stefan,  I cannot checkout due to the following error: ------------   error when searching for POST, posted by Guenter Nowak on Mon Sep 26 11:03:52 2005  is this an elog bug? calling http://midas.psi.ch/elogs/Linux%20Demo/?cmd=Find       Re: error when searching for POST, posted by Stefan Ritt on Wed Oct 5 13:07:51 2005  [quote="Guenter Nowak"]calling http://midas.psi.ch/elogs/Linux%20Demo/?cmd=Find (ELOG V2.6.0-beta4)   Can't use the command-line client, posted by Pieter Edelman on Wed Mar 16 20:04:32 2005  Hi all, I'm trying to use the command-line client from linux, but I can't make it work and that's driving me nuts... What I want is to reply to a selected message in the logbook, but I stumble onto two problems:       Re: Can't use the command-line client, posted by Stefan Ritt on Wed Mar 16 22:14:19 2005  > There is a read password ("Read Password=..." entry in elogd.cfg) on > the logbook which I cannot bypass from the client.          Re: Can't use the command-line client, posted by Pieter Edelman on Thu Mar 17 09:56:21 2005  This solved the problems, thanks for the fast response! On a side note, one would expect that when "Fixed Attributes Edit" or "Fixed Attributes             Re: Can't use the command-line client, posted by Stefan Ritt on Thu Mar 17 10:02:45 2005  > On a side note, one would expect that when "Fixed Attributes Edit" or "Fixed Attributes > Reply" is set, the attributes in this list shouldn't be supplied with the command line client.                Re: Can't use the command-line client, posted by Pieter Edelman on Thu Mar 17 23:06:54 2005  Okidokie. May I then humbly suggest to mention this in the documentation of the elog command client?                   Re: Can't use the command-line client, posted by Stefan Ritt on Fri Mar 18 08:02:52 2005  > Okidokie. May I then humbly suggest to mention this in the documentation of the elog command client? I did modify it already, see http://midas.psi.ch/elog/userguide.html at the bottom.       Re: Can't use the command-line client, posted by David Spindler on Tue Oct 4 19:40:27 2005  I have a similar problem. I am using Windows version, and whenever I use the elog client to send entry, it will not take with MOptions set. I usually have 2 attributes required (both MOptions), and I get the message that it is missing a required attribute. When I use ROptions, or Options, it works fine. Is there a problem with MOptions, or am I perhaps using a badly formatted commandline?          Re: Can't use the command-line client, posted by David Spindler on Tue Oct 4 20:24:26 2005  I just noticed in the changelog that my apparent problem with MOptions may have been fixed. I will try a newer version and see if it works.             Re: Can't use the command-line client, posted by David Spindler on Tue Oct 4 20:33:05 2005  [quote="David Spindler"]I just noticed in the changelog that my apparent problem with MOptions may have been fixed. I will try a newer version and see if it works.[/quote]   Can I turn off emoticons?, posted by Dan Chitwood on Wed Sep 21 04:24:43 2005  Is there a way to not use the emoticons, but at the same time use the ELCode?   An example would be to add a slash before the emoticon code like this: /:)       Re: Can I turn off emoticons?, posted by Stefan Ritt on Wed Sep 21 09:06:03 2005  [quote="Dan Chitwood"]Is there a way to not use the emoticons, but at the same time use the ELCode?   An example would be to add a slash before the emoticon code like this: /:)   Email Notification and Icons, posted by Mario Apodaca on Mon Sep 19 19:48:07 2005  I have two questions: 1) When sending out email notifications, is there a way to surpress the entries that have been left on the logbook?  I want to be notified that someone       Re: Email Notification and Icons, posted by Stefan Ritt on Mon Sep 19 20:39:17 2005  [quote="Mario Apodaca"]1) When sending out email notifications, is there a way to surpress the entries that have been left on the logbook?  I want to be notified that someone has posted, but not receive the posting in the email.[/quote]   changing the default to plain text rather than elcode, posted by John Habermann on Sun Jul 3 03:48:12 2005  Hi  I just shifted our elogs to a new server and in the process upgraded to the latest debian version which is 2.5.9+r1674-1. I am just wondering how to change       Re: changing the default to plain text rather than elcode, posted by Stefan Ritt on Tue Jul 5 23:06:12 2005  [quote="John Habermann"]I just shifted our elogs to a new server and in the process upgraded to the latest debian version which is 2.5.9+r1674-1. I am just wondering how to change the default for the text body area from "elcode" to plain text? I can't see anything in the admin configuration syntax guide and the HTML default = 2 option no longer seems to work.[/quote]          Re: changing the default to plain text rather than elcode, posted by Tim Fowler on Thu Jul 7 02:41:40 2005  [quote="Stefan Ritt"][quote="John Habermann"]I just shifted our elogs to a new server and in the process upgraded to the latest debian version which is 2.5.9+r1674-1. I am just wondering how to change the default for the text body area from "elcode" to plain text? I can't see anything in the admin configuration syntax guide and the HTML default = 2 option no longer seems to work.[/quote]             Re: changing the default to plain text rather than elcode, posted by Stefan Ritt on Thu Jul 7 08:38:11 2005  [quote="Tim Fowler"]The installation did not include scripts directory. Where can I download the [b]elcode.js[/b] file?[/quote] I said [b]future[/b] installations will handle this. This feature is still in beta becaus it's not finished completely. You can get the elcode.js from                Re: changing the default to plain text rather than elcode, posted by Tim Fowler on Thu Jul 7 22:31:40 2005  I said [b]future[/b] installations will handle this. This feature is still in beta becaus it's not finished completely. You can get the elcode.js from [URL=http://midas.psi.ch/cgi-bin/cvsweb/~checkout~/elog/scripts/elcode.js]CVS[/URL]. - Stefan[/quote]             Re: changing the default to plain text rather than elcode, posted by Noah P on Thu Sep 8 03:37:44 2005  I, too, found that this elcode.js file was missing.  However, it seems to be present on this demo site! so, I downloaded it from this very demo site, and saved it to my system (in the root of your resources folder).  This (so far) seems to have made the "ELCode"   Changes in Comment and Elog Index page?, posted by ralphb on Wed Aug 10 11:28:30 2005  Just updated to ELOG V2.6.0-beta4 from V2.5.6-2 and I note a couple of changes: - HTML code inculed in elog.cfg "Comment" lines were previously rendered, now they are not.  e.g. "Comment = Some comment<BR> <A href="http://somedomain.com/some.html"       Re: Changes in Comment and Elog Index page?, posted by ralphb on Thu Sep 1 17:53:58 2005  [quote="ralphb"]- The "Several logbooks are defined on this host" elog index page was previously collapsable, now it is not.[/quote] OK, I've fixed that one with "Expand Selection page = 0"       Re: Changes in Comment and Elog Index page?, posted by Stefan Ritt on Tue Sep 6 09:37:20 2005  [quote="ralphb"]HTML code inculed in elog.cfg "Comment" lines were previously rendered, now they are not.  e.g. "Comment = Some comment<BR> <A href="http://somedomain.com/some.html" target="_top">  Some link text</A>"  Is this change deliberate, or is the functionality likely to return? [/quote]          Re: Changes in Comment and Elog Index page?, posted by ralphb on Tue Sep 6 18:36:21 2005  [quote="Stefan Ritt"]I added some code now which checks if the comment is real HTML, and reverts back to the old behaviour if it is. The update is in CVS.[/quote] Thanks very much Stefan.   Omitting some fields in e-mail, posted by Michael Husbyn on Tue Jun 7 10:59:20 2005  Hello, Is there a way to include some attribute fields in the e-mail from eLog, but not all?       Re: Omitting some fields in e-mail, posted by Stefan Ritt on Wed Jul 20 20:54:01 2005  > E.g, if you have the following: > Attributes = TA, Endret, UA, Pri, Status, Oppdragsgiver, EpostTil, EpostIKT, Tittel >           Re: Omitting some fields in e-mail, posted by Michael Husbyn on Wed Jul 20 21:13:03 2005  > I added the option "Email attributes = <list>" for that. So you can specify >              Re: Omitting some fields in e-mail, posted by Michael Husbyn on Mon Aug 15 12:54:56 2005  >  > > I added the option "Email attributes = <list>" for that. So you can specify > >                 Re: Omitting some fields in e-mail, posted by Stefan Ritt on Tue Sep 6 14:41:10 2005  > Is there a way to remove Logbook field (and perhaps Logbook URL if I want?) There is the option "Email format", which lets you specify what to show. Try    Comment tooltip shows comment from other logbook, posted by Oleg Solovyanov on Wed Aug 10 18:32:14 2005  I have several logbooks with Comment lines, but the tooltip shows sometimes the correct comment, sometimes the comment from other logbook...       Re: Comment tooltip shows comment from other logbook, posted by Stefan Ritt on Tue Sep 6 09:41:04 2005  [quote="Oleg Solovyanov"]I have several logbooks with Comment lines, but the tooltip shows sometimes the correct comment, sometimes the comment from other logbook...   Email notification does not work, posted by Dinesh Bapat on Wed Aug 10 03:18:05 2005  I have SMTP server that requires authentication Whenever a new user 'self registers' to E-log, I get an automated email saying so. Hence, the SMTP setting are correct and working.       Re: Email notification does not work, posted by Stefan Ritt on Mon Sep 5 20:35:43 2005  [quote="Dinesh Bapat"]I have SMTP server that requires authentication Whenever a new user 'self registers' to E-log, I get an automated email saying so. Hence, the SMTP setting are correct and working.   charset specified in elog.conf has no effect [updated], posted by cunnilinux on Sun Aug 7 17:16:42 2005  well, here's the problem that i had: my charset (koi8-u) was specified in elog.conf for every logbook, but this had no effect, and all elog pages continued tu appeared as iso-8859-1 (which is the default) when i specified charset in the global section, the problem's gone away.       Re: charset specified in elog.conf has no effect [updated], posted by Stefan Ritt on Mon Sep 5 20:16:50 2005  [quote=cunnilinux]well, here's the problem that i had: my charset (koi8-u) was specified in elog.conf for every logbook, but this had no effect, and all elog pages continued tu appeared as iso-8859-1 (which is the default) when i specified charset in the global section, the problem's gone away.   password forgot kills elogd, posted by Martin Lindjärv on Wed Aug 31 22:03:04 2005  Hi! At first, thanx for this software!       Re: password forgot kills elogd, posted by Stefan Ritt on Mon Sep 5 20:05:43 2005  [quote="Martin Lindjärv"] But i found a bug or something like that. I installed elog on win2003 and winxp with default settings. And everywhere i had same problem - when forgot password is used it kills elogd. Error what is reported in EventLog is "Faulting application elogd.exe, version 0.0.0.0, faulting module elogd.exe, version   something for the wishlist: 'Recent Changes', posted by Heiko Scheit on Fri Aug 26 13:08:10 2005  Something for the wishlist:  A 'Recent Changes'-link (option) that lists entries that were changed       Re: something for the wishlist: 'Recent Changes', posted by ralphb on Thu Sep 1 18:26:38 2005  [quote="Heiko Scheit"]A 'Recent Changes'-link (option) that lists entries that were changed recently, where 'recent' can be changed from 1,2,3...(some maximum) days.[/quote]   password forgot kills elogd, posted by Martin Lindjärv on Wed Aug 31 22:02:46 2005  Hi! At first, thanx for this software!   Top Groups, Show Top Groups, password file and Protect Selection page have nasty interaction, posted by Chris Green on Fri Aug 5 02:27:15 2005  Hi, Just as our ELOG went into production, I tripped over a couple of related (I think) bugs.       Re: Top Groups, Show Top Groups, password file and Protect Selection page have nasty interaction, posted by Stefan Ritt on Fri Aug 5 12:06:47 2005  [quote="Chris Green"]Index: elogd.c =================================================================== RCS file: /usr/local/cvsroot/elog/src/elogd.c,v          Re: Top Groups, Show Top Groups, password file and Protect Selection page have nasty interaction, posted by Chris Green on Fri Aug 5 16:15:04 2005  [quote="Stefan Ritt"]One note I would like to make however: "Top groups" were invented for having completely separate logbook groups. Before the invention of top groups, one had to run several instances of elogd for different departments for example, where one department should not see the other department's logbooks. But having many departments means having to maintain many elogd daemons. This led to the invention of top groups, so one daemon can serve several             Re: Top Groups, Show Top Groups, password file and Protect Selection page have nasty interaction, posted by Stefan Ritt on Fri Aug 5 16:51:02 2005  [quote="Chris Green"]The quick attempt I just made to use this doesn't do what I want, which is to require password protection for the Analysis logbook selection page.[/quote]   How does RSS interact with password protection?, posted by Chris Green on Fri Aug 5 16:17:00 2005  Can I have an RSS feed to a protected log book? Does it also require authentication, or does it bypass it? If it bypasses it, how do I disable RSS? Thanks,       Re: How does RSS interact with password protection?, posted by Stefan Ritt on Fri Aug 5 16:48:56 2005  [quote="Chris Green"]Can I have an RSS feed to a protected log book? Does it also require authentication, or does it bypass it? If it bypasses it, how do I disable RSS?   Email subject garbaged when set?, posted by Chris Green on Wed Jul 27 17:30:38 2005  Hi, So I'm using the CVS version now since I was hoping this would be fixed. If I set the email subject explicitly, viz:       Re: Email subject garbaged when set?, posted by Stefan Ritt on Thu Aug 4 22:59:12 2005  [quote="Chris Green"]The email I get has: Subject:          Re: Email subject garbaged when set?, posted by Chris Green on Fri Aug 5 01:13:13 2005  [quote="Stefan Ritt"][quote="Chris Green"]The email I get has: Subject:          Re: Email subject garbaged when set?, posted by Heiko Scheit on Fri Aug 5 11:18:08 2005  [quote="Stefan Ritt"][quote="Chris Green"]The email I get has: Subject:             Re: Email subject garbaged when set?, posted by Stefan Ritt on Fri Aug 5 12:37:42 2005  [quote="Heiko Scheit"]Well not quite.  According to the RFC the encoded word must not be longer than 75 characters!  Indeed shorter subjects are displayed by pine, but not longer ones as they do not follow RFC2047. Below is the quote from the RFC.[/quote]   problem with list display attribute, posted by John Habermann on Thu Jul 28 01:02:00 2005  I not sure if this has been found and fixed as I did find something to do with the list display attribute in the forums but wasn't sure if it was the same thing.       Re: problem with list display attribute, posted by Stefan Ritt on Thu Aug 4 20:32:56 2005  [quote="John Habermann"]I not sure if this has been found and fixed as I did find something to do with the list display attribute in the forums but wasn't sure if it was the same thing.          Re: problem with list display attribute, posted by Emiliano Gabrielli on Fri Aug 5 09:19:02 2005  [quote="Stefan Ritt"][quote="John Habermann"]I not sure if this has been found and fixed as I did find something to do with the list display attribute in the forums but wasn't sure if it was the same thing.   Login twice, posted by Carl Shirey on Thu Jul 28 17:11:32 2005  Where I work we started to use Elog for our shift carry over log, everyone seems to likes it. I do have one problem for some reason we have to login twice in order to submit a new entree in  the log.  I do have a guest account setup so when we click logon the logon page pops up and you        Re: Login twice, posted by Stefan Ritt on Sat Jul 30 14:36:08 2005  [quote="Carl Shirey"]Where I work we started to use Elog for our shift carry over log, everyone seems to likes it. I do have one problem for some reason we have to login twice in order to submit a new entree in  the log.  I do have a guest account setup so when we click logon the logon page pops up and you           Re: Login twice, posted by Carl Shirey on Mon Aug 1 23:41:06 2005  [quote="Stefan Ritt"][quote="Carl Shirey"]Where I work we started to use Elog for our shift carry over log, everyone seems to likes it. I do have one problem for some reason we have to login twice in order to submit a new entree in  the log.  I do have a guest account setup so when we click logon the logon page pops up and you              Re: Login twice, posted by Stefan Ritt on Thu Aug 4 21:44:53 2005  [quote="Carl Shirey"]Yes Here is a copy of the elog.cfg.[/quote] I tried with your config file and it worked fine. So can you tell me:                Re: Login twice, posted by Carl Shirey on Fri Aug 5 02:14:22 2005  [quote="Stefan Ritt"][quote="Carl Shirey"]Yes Here is a copy of the elog.cfg.[/quote] I tried with your config file and it worked fine. So can you tell me:   Notify email recipient of attachments without including?, posted by Chris Green on Wed Jul 27 17:38:25 2005  Hi, Our elog is going to be taking some large attachments. I've disabled the attachments from going out in the email, but I'd like email recipients to know       Re: Notify email recipient of attachments without including?, posted by Stefan Ritt on Thu Aug 4 20:29:23 2005  [quote="Chris Green"]Hi, Our elog is going to be taking some large attachments. I've disabled the attachments from going out in the email, but I'd like email recipients to know          Re: Notify email recipient of attachments without including?, posted by Chris Green on Fri Aug 5 01:15:23 2005  [quote="Stefan Ritt"][quote="Chris Green"]Hi, Our elog is going to be taking some large attachments. I've disabled the attachments from going out in the email, but I'd like email recipients to know   Creating logbook by copying an existing one crashes elog, posted by Chris Howe on Thu Jul 28 15:33:21 2005  Hi, Trying to create a new logbook from an existing one causes elog to crash.       Re: Creating logbook by copying an existing one crashes elog, posted by Stefan Ritt on Thu Aug 4 21:36:21 2005  [quote="Chris Howe"]Trying to create a new logbook from an existing one causes elog to crash.[/quote] I (hopefully) fixed that bug. The fix will be included in 2.6.0-beta4.   Problems with beta 3 (Follow-on to CVS/XML msg 1296), posted by PJ Meyer on Wed Jul 27 02:15:59 2005  Ok downloaded and installed beta 3 can get xml and cvs with dates as date! verrry haaapppppy!  :)       Re: Problems with beta 3 (Follow-on to CVS/XML msg 1296), posted by Stefan Ritt on Wed Jul 27 09:39:47 2005  [quote="PJ Meyer"]but something happened to the css. i'm getting white background and no icons anywhere.          Re: Problems with beta 3 (Follow-on to CVS/XML msg 1296), posted by PJ Meyer on Thu Jul 28 03:08:19 2005  [quote="Stefan Ritt"][quote="PJ Meyer"]but something happened to the css. i'm getting white background and no icons anywhere.             Resolution (i think) - Re: Problems with beta 3 (Follow-on to CVS/XML msg 1296), posted by PJ Meyer on Thu Jul 28 04:29:35 2005  [quote="PJ Meyer"][quote="Stefan Ritt"][quote="PJ Meyer"]but something happened to the css. i'm getting white background and no icons anywhere.                Resolution (i think) - Re: Problems with beta 3 (Follow-on to CVS/XML msg 1296), posted by Stefan Ritt on Thu Aug 4 20:35:48 2005  [quote="PJ Meyer"]think I figured it out- had to make explict most of the default settings: resource, logbook, url, theme, css and so on. so this is done.[/quote]   Response is very slow with beta3, posted by PJ Meyer on Thu Jul 28 04:27:30 2005  I finally got 2.60 Beta3 running on my server (explicit statements in cfg for most of the defaults) Now I'm seeing a veerrry slooooow response time - over 3 minutes to open a logbook vs 10 sec in 2.54       Re: Response is very slow with beta3, posted by Emiliano Gabrielli on Wed Aug 3 13:01:17 2005  [quote="PJ Meyer"]I finally got 2.60 Beta3 running on my server (explicit statements in cfg for most of the defaults) Now I'm seeing a veerrry slooooow response time - over 3 minutes to open a logbook vs 10 sec in 2.54          Re: Response is very slow with beta3, posted by Stefan Ritt on Wed Aug 3 22:44:43 2005  [quote="Emiliano Gabrielli"]for every image elog has to serve one can see something similar to the above ... lot of time lost in selects.. then a lot of data (serving an image I suppose), then a lot of time in select again and again ... untill everything is sent, in a couple of minutes or more ;-(             Re: Response is very slow with beta3, posted by Emiliano Gabrielli on Thu Aug 4 11:19:53 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]for every image elog has to serve one can see something similar to the above ... lot of time lost in selects.. then a lot of data (serving an image I suppose), then a lot of time in select again and again ... untill everything is sent, in a couple of minutes or more ;-(   Summary page, posted by Dinesh Bapat on Mon Jul 25 10:14:27 2005  Hi, This might be a stupid question.        Re: Summary page, posted by Stefan Ritt on Mon Jul 25 10:24:23 2005  [quote="Dinesh Bapat"]But "Summary" page of my e-log continues to display additional column "Text". Kindly advise how to hide this last column.[/quote] [FONT=courier]Summary lines = 0[/FONT]          Re: Summary page, posted by Dinesh Bapat on Mon Aug 1 06:14:41 2005  Thank you very much.   attribute of type "datetime" sorted incorrectly, posted by Kees Bol on Wed Jul 27 16:46:44 2005  In order to enter different logdates we created the attribute 'Logdate' as follows: ...       Re: attribute of type "datetime" sorted incorrectly, posted by Stefan Ritt on Wed Jul 27 21:22:47 2005  [quote="Kees Bol"]What goes wrong here?[/quote] The wrong sorting is a mystery to me. I redid what you have, and entered exactly the same entries, and got following:          Re: attribute of type "datetime" sorted incorrectly, posted by Kees Bol on Thu Jul 28 09:46:40 2005  [quote="Stefan Ritt"][quote="Kees Bol"]What goes wrong here?[/quote] The wrong sorting is a mystery to me. I redid what you have, and entered exactly the same entries, and got following:   hide attributes when view the logbook, posted by Juliana Peng on Wed Jul 20 19:49:21 2005  Hi Stefan, Thanks for the great work. We have been using elog for a year as inventory management.        Re: hide attributes when view the logbook, posted by Stefan Ritt on Wed Jul 20 23:24:59 2005  [quote="Juliana Peng"]but it seems only effective when adding the new entry. All the attributes will show in logbook. Is there a way to hide some of the attributes? It would be good to let each user to choose what to see what not to see, create their own view. Can you put it on your to-do list or wishlist?[/quote]          Re: hide attributes when view the logbook, posted by Juliana Peng on Fri Jul 22 17:21:15 2005  [quote="Stefan Ritt"][quote="Juliana Peng"]but it seems only effective when adding the new entry. All the attributes will show in logbook. Is there a way to hide some of the attributes? It would be good to let each user to choose what to see what not to see, create their own view. Can you put it on your to-do list or wishlist?[/quote]             Re: hide attributes when view the logbook, posted by Juliana Peng on Fri Jul 22 17:54:41 2005  [quote="Juliana Peng"][quote="Stefan Ritt"][quote="Juliana Peng"]but it seems only effective when adding the new entry. All the attributes will show in logbook. Is there a way to hide some of the attributes? It would be good to let each user to choose what to see what not to see, create their own view. Can you put it on your to-do list or wishlist?[/quote]                Re: hide attributes when view the logbook, posted by Stefan Ritt on Fri Jul 22 22:45:37 2005  [quote="Juliana Peng"]Thanks so much. But the new feature seems not working.[/quote] Are you sure you got the latest CVS version and recompiled correctly?                   Re: hide attributes when view the logbook, posted by Juliana Peng on Mon Jul 25 22:32:10 2005  [quote="Stefan Ritt"][quote="Juliana Peng"]Thanks so much. But the new feature seems not working.[/quote] Are you sure you got the latest CVS version and recompiled correctly?                      Re: hide attributes when view the logbook, posted by Stefan Ritt on Tue Jul 26 09:38:07 2005  [quote="Juliana Peng"]I downloaded Revision 1.717, replaced the source code with the new elogd.c, then run " dpkg-buildpackage -uc -b" (debian linux) to build the package. Now after i add a new entry, once I select it I got  "Attachment #1 of entry #0 not found" error[/quote]                   Re: hide attributes when view the logbook, posted by Juliana Peng on Tue Jul 26 16:44:41 2005  [quote="Stefan Ritt"][quote="Juliana Peng"]Thanks so much. But the new feature seems not working.[/quote] Are you sure you got the latest CVS version and recompiled correctly?                      Re: hide attributes when view the logbook, posted by Stefan Ritt on Tue Jul 26 16:50:59 2005  [quote="Juliana Peng"]Thanks. But what I want is to hide the unwanted attributes at summary view, not just hide them when I click on entry.[/quote] No you can't do that.                         Re: hide attributes when view the logbook, posted by Juliana Peng on Tue Jul 26 17:28:31 2005  [quote="Stefan Ritt"][quote="Juliana Peng"]Thanks. But what I want is to hide the unwanted attributes at summary view, not just hide them when I click on entry.[/quote]                            Re: hide attributes when view the logbook, posted by Stefan Ritt on Tue Jul 26 20:35:45 2005  [quote="Juliana Peng"]I may have all the attributes in logbook to keep a full record of all the machine. But for daily use, some of the attibutes we are not using so often. Too many attributes will make the window so big that can not be hold in one screen which is the reason why I want to hide some of them. Of course the hidden attributes have data, but those data are rarely used so we'd rather hide them.                                Re: hide attributes when view the logbook, posted by Juliana Peng on Tue Jul 26 22:05:24 2005  [quote="Stefan Ritt"] Use "list display = <attribute list>" to specify which attributes to show in the listing page. RTFM.[/quote]                                  Re: hide attributes when view the logbook, posted by Stefan Ritt on Wed Jul 27 09:07:17 2005  [quote="Juliana Peng"]But is there a way to control to hide or view the attributes? so that we don't need to change the elog.conf file each time. For example, add a menu "expend" in "Find menu commands", we can click to view all the attributes or just view the attributes defined in "List Display"                                     Re: hide attributes when view the logbook, posted by Juliana Peng on Wed Jul 27 15:49:16 2005  [quote="Stefan Ritt"] In that case I would suggest two separate logbooks, for for SunOS and one for others. This way you can manage two separate sets of attributes.[/quote]                                        Re: hide attributes when view the logbook, posted by Stefan Ritt on Wed Jul 27 15:56:53 2005  [quote="Juliana Peng"]We don't want separate logbooks, sorry for the misleading. I was trying to put two request together.[/quote] I understood you correctly. What I was trying to say is that what you currently request possible with the current version and will not be implemented soon.                                           Re: hide attributes when view the logbook, posted by Juliana Peng on Wed Jul 27 16:31:33 2005  [quote="Stefan Ritt"] I understood you correctly. What I was trying to say is that what you currently request possible with the current version and will not be implemented soon. But you can partly obtain what you want by having two logbooks. Make one logbook which has fewer attributes, and which will receive all SunOS entries.   Restrict Top Groups to logged-in users?, posted by Chris Green on Tue Jul 26 17:57:36 2005  Hi, I'd like to be able to prevent non-logged-in users from seeing what logbooks exist in a top group. Currently it seems that one is only required to log       Re: Restrict Top Groups to logged-in users?, posted by Stefan Ritt on Tue Jul 26 20:32:02 2005  [quote="Chris Green"]I'd like to be able to prevent non-logged-in users from seeing what logbooks exist in a top group. Currently it seems that one is only required to log in once one has chosen a logbook. Is this possible?[/quote]          Re: Restrict Top Groups to logged-in users?, posted by Chris Green on Tue Jul 26 20:51:10 2005  [quote="Stefan Ritt"][quote="Chris Green"]I'd like to be able to prevent non-logged-in users from seeing what logbooks exist in a top group. Currently it seems that one is only required to log in once one has chosen a logbook. Is this possible?[/quote]             Re: Restrict Top Groups to logged-in users?, posted by Stefan Ritt on Tue Jul 26 21:11:31 2005  [quote="Chris Green"]I already had the "password file = <file>" in the [global <top group>] section but I was still able to see the logbooks in that section. Moving the password line to [global] and / or setting Show Top Groups = 0 helped. Am I doing something wrong?[/quote]                Re: Restrict Top Groups to logged-in users?, posted by Chris Green on Tue Jul 26 21:54:39 2005  [quote="Stefan Ritt"] If you move the "password file = <file>" entry around, you can get fooled by stored cookies. So after each modification, make sure to delete all cookies in your browser.[/quote]   New and reply pages don't use Page Title, posted by Chris Green on Tue Jul 26 17:41:10 2005  Is this intentional, or can it be changed? I'd like every page associated with a particular logbook to use that logbook's page title as at least part of its own.       Re: New and reply pages don't use Page Title, posted by Stefan Ritt on Tue Jul 26 20:23:33 2005  [quote="Chris Green"]I'd like every page associated with a particular logbook to use that logbook's page title as at least part of its own.[/quote] On the list page, you can use "summary page title = <title>". Since this option is misleading, I renamed it to "List page title = <title>". Then I added          Re: New and reply pages don't use Page Title, posted by Chris Green on Tue Jul 26 21:05:26 2005  [quote="Stefan Ritt"]So if you have time and fun doing it, you could restructure the documentation page into some separate pages, to give people a better overview. Please send the modified pages back to me and I will include them on the web site.[/quote] I'll try to put this together in the next week or two. Thanks for all your help,   Can't set Author attribute properly in reply?, posted by Chris Green on Mon Jul 25 23:39:16 2005  Hi, I have two problems:       Re: Can't set Author attribute properly in reply?, posted by Emiliano Gabrielli on Tue Jul 26 10:00:34 2005  [quote="Chris Green"]Hi, I have two problems:       Re: Can't set Author attribute properly in reply?, posted by Stefan Ritt on Tue Jul 26 10:02:58 2005  [quote="Chris Green"]1) With the configuration below, I can't set the Author attribute to be the author of the reply. As written, it gives the Author field as blank. If the Remove on Reply line is removed, it is set to the parent's author. What am I doing wrong?[/quote]          Re: Can't set Author attribute properly in reply?, posted by Emiliano Gabrielli on Tue Jul 26 10:49:12 2005  [quote="Stefan Ritt"][quote="Chris Green"]1) With the configuration below, I can't set the Author attribute to be the author of the reply. As written, it gives the Author field as blank. If the Remove on Reply line is removed, it is set to the parent's author. What am I doing wrong?[/quote]             Re: Can't set Author attribute properly in reply?, posted by Stefan Ritt on Tue Jul 26 10:51:12 2005  [quote="Emiliano Gabrielli"]Substitute is the only way I have to be assure it is as I want ...[/quote] No, that's not true. A                Re: Can't set Author attribute properly in reply?, posted by Emiliano Gabrielli on Tue Jul 26 10:55:03 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]Substitute is the only way I have to be assure it is as I want ...[/quote] No, that's not true. A                   Re: Can't set Author attribute properly in reply?, posted by Stefan Ritt on Tue Jul 26 10:59:45 2005  [quote="Emiliano Gabrielli"]The following code will assure that, if the HTML generated by elog would be modified by hand by a malicious user the server can still preset the author field with the right $long_name? [/quote]                      Re: Can't set Author attribute properly in reply?, posted by Emiliano Gabrielli on Tue Jul 26 12:02:35 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]The following code will assure that, if the HTML generated by elog would be modified by hand by a malicious user the server can still preset the author field with the right $long_name? [/quote]       Re: Can't set Author attribute properly in reply?, posted by Chris Green on Tue Jul 26 17:32:59 2005  Thanks for this, gents. Chris.   <img> in Display Attribute, posted by Emiliano Gabrielli on Fri Jul 8 19:08:30 2005  My goal is to be able to do the following : [B][CODE]Display Category = $category <img src="icons/$category.png" border="0">[/CODE][/B]       Re: <img> in Display Attribute, posted by Stefan Ritt on Fri Jul 8 22:18:01 2005  [quote="Emiliano Gabrielli"]My goal is to be able to do the following : [B][CODE]Display Category              = $category <img src="icons/$category.png" border="0">[/CODE][/B]          Re: <img> in Display Attribute, posted by Emiliano Gabrielli on Sat Jul 9 16:06:58 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]My goal is to be able to do the following : [B][CODE]Display Category              = $category <img src="icons/$category.png" border="0">[/CODE][/B]             Re: < img > in Display Attribute, posted by Stefan Ritt on Mon Jul 11 13:13:27 2005  [quote="Emiliano Gabrielli"]Still a problem .. sorry: [CODE]                Re: < img > in Display Attribute, posted by Emiliano Gabrielli on Mon Jul 11 14:30:11 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]Still a problem .. sorry: [CODE]                   Re: < img > in Display Attribute, posted by Emiliano Gabrielli on Fri Jul 15 17:28:33 2005  the very usefull thing my request will enable is the following: [CODE]                      Re: < img > in Display Attribute, posted by Stefan Ritt on Wed Jul 20 23:30:45 2005  [quote="Emiliano Gabrielli"]the very usefull thing my request will enable is the following: [CODE]                         Re: < img > in Display Attribute, posted by Emiliano Gabrielli on Thu Jul 21 09:31:35 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]the very usefull thing my request will enable is the following: [CODE]                   Re: < img > in Display Attribute, posted by Stefan Ritt on Sat Jul 16 12:30:33 2005  [quote="Emiliano Gabrielli"]IMHO the solution may be in allowing html code only in the cfg, not in the value of the field.. i.e., elog has to first allow html in the cfg attribute and then replace every $attribute with their values... this values as to be translated in html entities in order to solve the problem                      Re: < img > in Display Attribute, posted by Emiliano Gabrielli on Mon Jul 18 10:09:06 2005  [quote="Stefan Ritt"] I added an escape character. If you write <b> or \[b], then it gets interpreted. If you write \<b> or \\[b] with the "\" in front of the tag, it does not get interpreted, thus the '\' works like an escape character. I edited your old entry with the <img> in the subject, and as you see it is now not interpreted.             Re: <img> in Display Attribute, posted by Stefan Ritt on Wed Jul 20 23:32:46 2005  [quote="Emiliano Gabrielli"]when I try to use this featur on a conditional attr it is ignored .. If I remove the {1} it is obviously showed .. but also when no $level is defined (taht is infact not what should be)...                Re: <img> in Display Attribute, posted by Emiliano Gabrielli on Thu Jul 21 12:54:32 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]when I try to use this featur on a conditional attr it is ignored .. If I remove the {1} it is obviously showed .. but also when no $level is defined (taht is infact not what should be)...                   Re: <img> in Display Attribute, posted by Stefan Ritt on Fri Jul 22 23:14:23 2005  [quote="Emiliano Gabrielli"]- only "Author" and "subject" is displayed (text too of course) ;( [/quote] That was a bug. I fixed it in CVS.                      Re: <img> in Display Attribute, posted by Emiliano Gabrielli on Sat Jul 23 16:16:10 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]- only "Author" and "subject" is displayed (text too of course) ;( [/quote] That was a bug. I fixed it in CVS.                         Re: <img> in Display Attribute, posted by Stefan Ritt on Sat Jul 23 18:23:57 2005  [quote="Emiliano Gabrielli"]I'd like to be able to do what I explained in elog:1289  ...[/quote] Ok, got it. So I implemented conditional display in the list mode. If that works for you, it was the last wish fulfilled before Christmas! ;)                            Re: <img> in Display Attribute, posted by Emiliano Gabrielli on Mon Jul 25 13:29:23 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]I'd like to be able to do what I explained in elog:1289  ...[/quote] Ok, got it. So I implemented conditional display in the list mode. If that works for you, it was the last wish fulfilled before Christmas! ;)[/quote]                               Re: <img> in Display Attribute, posted by Stefan Ritt on Mon Jul 25 21:29:52 2005  [quote="Emiliano Gabrielli"]donno if a "List Display <Attribute>" could be *the* solution ... [/quote] That's a good idea. Unfortunately, "List Display" is already used to specify which attributes to display in list mode. So I changed "Display <attibute>"                                  Re: <img> in Display Attribute, posted by Emiliano Gabrielli on Tue Jul 26 10:45:14 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]donno if a "List Display <Attribute>" could be *the* solution ... [/quote] That's a good idea. Unfortunately, "List Display" is already used to specify which attributes to display in list mode. So I changed "Display <attibute>"                      Re: <img> in Display Attribute, posted by Emiliano Gabrielli on Sat Jul 23 16:45:28 2005  [quote="Stefan Ritt"] BTW: Conditional attributes now also work for email notifications, so you can do for example:                         Re: <img> in Display Attribute, posted by Stefan Ritt on Sat Jul 23 18:30:57 2005  [quote="Emiliano Gabrielli"]if one uses ROptions instead of a simple Options the text displaied is "plain{1}" (with the "{1}" not stripped out!!)[/quote] Ok, fixed.   Date in CSV and XML in UNIX time, posted by PJ Meyer on Fri Jul 22 03:15:29 2005  Q: How can dates be exported correctly in CSV and XML? In windows version I'm getting the Unix seconds since 1970. XML export:       Re: Date in CSV and XML in UNIX time, posted by Stefan Ritt on Fri Jul 22 08:56:20 2005  [quote="PJ Meyer"]So what can be done to make all the dates look like dates?[/quote] Simply upgrade to 2.6.0beta where this problem has been solved.          Re: Date in CSV and XML in UNIX time, posted by PJ Meyer on Mon Jul 25 19:15:33 2005  [quote="Stefan Ritt"][quote="PJ Meyer"]So what can be done to make all the dates look like dates?[/quote] Simply upgrade to 2.6.0beta where this problem has been solved.[/quote]             Re: Date in CSV and XML in UNIX time, posted by Stefan Ritt on Mon Jul 25 20:20:18 2005  [quote="PJ Meyer"][quote="Stefan Ritt"][quote="PJ Meyer"]So what can be done to make all the dates look like dates?[/quote] Simply upgrade to 2.6.0beta where this problem has been solved.[/quote]                Re: Date in CSV and XML in UNIX time, posted by PJ Meyer on Mon Jul 25 22:27:06 2005  [quote="Stefan Ritt"][quote="PJ Meyer"][quote="Stefan Ritt"][quote="PJ Meyer"]So what can be done to make all the dates look like dates?[/quote] Simply upgrade to 2.6.0beta where this problem has been solved.[/quote]                   Re: Date in CSV and XML in UNIX time, posted by Stefan Ritt on Tue Jul 26 09:25:40 2005  [quote="PJ Meyer"]Q: could it be the spaces in Attribute name???? Or the differences between Linux and Windows ports?[/quote]   Literal comma in elogd.conf entries where "," is an item separator?, posted by Chris Green on Mon Jul 25 19:24:47 2005  Hi, Could you tell me if there is a way to escape characters in elogd.conf? Particularly, I want to have a drop-down "Keyword" attribute where one of the options       Re: Literal comma in elogd.conf entries where "," is an item separator?, posted by Stefan Ritt on Mon Jul 25 20:25:26 2005  [quote="Chris Green"]Could you tell me if there is a way to escape characters in elogd.conf? Particularly, I want to have a drop-down "Keyword" attribute where one of the options is "Spelling, grammar and typos.". This invariably gets split into "Spelling" and "grammar and typos". I've tried "\,", ",,", "%," and "%27", to no avail.[/quote]          Re: Literal comma in elogd.conf entries where "," is an item separator?, posted by Chris Green on Mon Jul 25 21:41:00 2005  Sorry for being dense. Thanks for this, Chris.   A new ELOG user wants to register on "127.0.0.1", posted by Emiliano Gabrielli on Thu Jul 14 15:58:07 2005  A new ELOG user wants to register on "127.0.0.1"       Re: A new ELOG user wants to register on "127.0.0.1", posted by Stefan Ritt on Thu Jul 14 17:29:42 2005  [quote="Emiliano Gabrielli"]A new ELOG user wants to register on "127.0.0.1"          Re: A new ELOG user wants to register on "127.0.0.1", posted by Emiliano Gabrielli on Thu Jul 14 19:16:06 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]A new ELOG user wants to register on "127.0.0.1"             Re: A new ELOG user wants to register on "127.0.0.1", posted by Stefan Ritt on Sat Jul 23 15:46:06 2005  Ok, I kind of misunderstood the "-n" parameter. It is the interface to listen to, which is not necessarily the host name as seen from outside. I changed that in the following way:   Display Subject and HTML tags, regression, posted by Emiliano Gabrielli on Mon Jul 18 10:16:35 2005  rev 1.703 makes the following code not to work: [CODE]Display Subject               = <b>$subject</b>[/CODE]       Re: Display Subject and HTML tags, regression, posted by Emiliano Gabrielli on Mon Jul 18 18:36:32 2005  [quote="Emiliano Gabrielli"]rev 1.703 makes the following code not to work: [CODE]Display Subject               = <b>$subject</b>[/CODE]          Re: Display Subject and HTML tags, regression, posted by Stefan Ritt on Wed Jul 20 22:39:05 2005  [quote="Emiliano Gabrielli"][quote="Emiliano Gabrielli"]rev 1.703 makes the following code not to work: [CODE]Display Subject               = <b>$subject</b>[/CODE]             Re: Display Subject and HTML tags, regression, posted by Emiliano Gabrielli on Thu Jul 21 11:02:44 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"][quote="Emiliano Gabrielli"]rev 1.703 makes the following code not to work: [CODE]Display Subject               = <b>$subject</b>[/CODE]       Re: Display Subject and HTML tags, regression, posted by Stefan Ritt on Wed Jul 20 22:28:14 2005  [quote="Emiliano Gabrielli"]rev 1.703 makes the following code not to work: [CODE]Display Subject               = <b>$subject</b>[/CODE]          Re: Display Subject and HTML tags, regression, posted by Emiliano Gabrielli on Thu Jul 21 11:00:47 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]rev 1.703 makes the following code not to work: [CODE]Display Subject               = <b>$subject</b>[/CODE]   [code] should be a sort of <CDATA >, posted by Emiliano Gabrielli on Wed Jul 13 15:09:48 2005  Using the \[code] elocode should be intended also to preserve the tagged text from beeing parsed as html or elcode itself .. this is an example:       Re: [code] should be a sort of <CDATA >, posted by Stefan Ritt on Wed Jul 20 21:43:56 2005  [quote="Emiliano Gabrielli"]Using the \[code] elocode should be intended also to preserve the tagged text from beeing parsed as html or elcode itself .. this is an example:          Re: [code] should be a sort of <CDATA >, posted by Emiliano Gabrielli on Thu Jul 21 10:59:22 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]Using the \[code] elocode should be intended also to preserve the tagged text from beeing parsed as html or elcode itself ..   elog utility for submission used wrong 'Host:' in POST header, posted by Heiko Scheit on Mon Jul 11 19:04:38 2005  The 'elog' utility for commandline submission used wrong 'Host:' in POST header. The host listed after 'Host:' should be the host where the server runs, not the  localhost (see patch below).       Re: elog utility for submission used wrong 'Host:' in POST header, posted by Emiliano Gabrielli on Tue Jul 12 10:15:30 2005  > The 'elog' utility for commandline submission used wrong 'Host:' in POST header. > The host listed after 'Host:' should be the host where the server runs, not the  > localhost (see patch below).          Re: elog utility for submission used wrong 'Host:' in POST header, posted by Stefan Ritt on Wed Jul 20 21:03:29 2005  [quote="Emiliano Gabrielli"]This is not completally true IMHO .. better, it is, but it is not the only problem. Elog seems to speak HTML/1.0, where "host:" is not implemented ... Since ELOG does [B]not[/B] support Vhosts I think the right beaviour is to [U]remove   Cannot stat() config file , posted by Stefan Rudat on Wed Jul 20 08:32:06 2005  Hi  Elog runs now for serveral month without any problem at a Windows 2000 server.       Re: Cannot stat() config file , posted by Stefan Ritt on Wed Jul 20 20:13:26 2005  [quote="Stefan Rudat"]Cannot stat() config file; No such file or directory.[/quote] I do not know what exactly is going on. This error occurs during runtime when elog tries to check if the config file (usually elogd.cfg) has changed. It   short/long_name should point the same user, posted by Emiliano Gabrielli on Thu Jul 14 12:47:06 2005  .. I mean that if I use: [CODE]       Re: short/long_name should point the same user, posted by Emiliano Gabrielli on Thu Jul 14 13:05:33 2005  [quote="Emiliano Gabrielli"].. I mean that if I use: [CODE]       Re: short/long_name should point the same user, posted by Stefan Ritt on Thu Jul 14 17:34:12 2005  [quote="Emiliano Gabrielli"]In my case I changed it by error, people inserted entries and now I restored the correct one .. so now I have to unlock the attribute and change every Author by hand as admin :-)[/quote]          Re: short/long_name should point the same user, posted by Emiliano Gabrielli on Thu Jul 14 19:11:54 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]In my case I changed it by error, people inserted entries and now I restored the correct one .. so now I have to unlock the attribute and change every Author by hand as admin :-)[/quote]             Re: short/long_name should point the same user, posted by Stefan Ritt on Thu Jul 14 20:24:07 2005  [quote="Emiliano Gabrielli"]uhm..  I think the confusion intrinsict in elog between long and short name is something to be solved .. an attribute of type "userlist" fills always with the long_name .. but if I would to insert it as short ?                Re: short/long_name should point the same user, posted by Emiliano Gabrielli on Fri Jul 15 15:03:01 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]uhm..  I think the confusion intrinsict in elog between long and short name is something to be solved .. an attribute of type "userlist" fills always with the long_name .. but if I would to insert it as short ?   userlist multiple select, posted by Emiliano Gabrielli on Mon Jul 11 09:52:52 2005  Here I am again :-) My goal is to put a "Co-Authors" Attribute in my logbook, giving the possibility to other people in the control room to have credits about an entry...       Re: userlist multiple select, posted by Stefan Ritt on Mon Jul 11 12:40:13 2005  [quote="Emiliano Gabrielli"]Here I am again :-) My goal is to put a "Co-Authors" Attribute in my logbook, giving the possibility to other people in the control room to have credits about an entry...          Re: userlist multiple select, posted by Emiliano Gabrielli on Mon Jul 11 14:35:00 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]Here I am again :-) My goal is to put a "Co-Authors" Attribute in my logbook, giving the possibility to other people in the control room to have credits about an entry...             Re: userlist multiple select, posted by Stefan Ritt on Tue Jul 12 15:19:07 2005  [quote="Emiliano Gabrielli"]a multiple selection box it's a standard web tool .. if one is not able to use its browser is not an elog problem IMHO[/quote] Really? Can you point me to a common web site using this? I would really like to see how other people use this.                Re: userlist multiple select, posted by Emiliano Gabrielli on Wed Jul 13 10:12:38 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]a multiple selection box it's a standard web tool .. if one is not able to use its browser is not an elog problem IMHO[/quote]   Suppress Email notification checkbox, posted by Gary Clayson on Thu Jul 7 05:30:24 2005  Hello All. Stefan, would it be possible to add one more option to the Suppress Default flag? I'd appreciate a setting that would suppress emails being sent and remove the option from the page. Or, has this been accomplished? And, if so, what is that setting. Thanks in advance!! Keep up the great work.       Re: Suppress Email notification checkbox, posted by Stefan Ritt on Thu Jul 7 22:02:52 2005  [quote="Gary Clayson"]Hello All. Stefan, would it be possible to add one more option to the Suppress Default flag? I'd appreciate a setting that would suppress emails being sent and remove the option from the page. Or, has this been accomplished? And, if so, what is that setting. Thanks in advance!! Keep up the great work.[/quote]          Re: Suppress Email notification checkbox, posted by Gary Clayson on Fri Jul 8 22:20:19 2005  [quote="Stefan Ritt"][quote="Gary Clayson"]Hello All. Stefan, would it be possible to add one more option to the Suppress Default flag? I'd appreciate a setting that would suppress emails being sent and remove the option from the page. Or, has this been accomplished? And, if so, what is that setting. Thanks in advance!! Keep up the great work.[/quote]          Re: Suppress Email notification checkbox, posted by Gary Clayson on Tue Jul 12 17:41:30 2005  [quote="Stefan Ritt"][quote="Gary Clayson"]Hello All. Stefan, would it be possible to add one more option to the Suppress Default flag? I'd appreciate a setting that would suppress emails being sent and remove the option from the page. Or, has this been accomplished? And, if so, what is that setting. Thanks in advance!! Keep up the great work.[/quote]   icon comment not display using firefox, posted by Laurent S. Nadolski on Mon Jul 11 11:16:59 2005  Hi, I found out the following bug.       Re: icon comment not display using firefox, posted by Stefan Ritt on Mon Jul 11 12:35:40 2005  [quote="Laurent S. Nadolski"]I found out the following bug. Icon comment are not displayed when browsing with firefox. But it works fine with IE. A goo test page is this very elog entry.    show/hide attachments, posted by Emiliano Gabrielli on Sat Jul 9 17:21:51 2005  It would be nice ad usefull to have a "show/hide attachments" just at the side of "show only last" link .. BTW, it would be nice if those settings would be stored in a cooky too :-)   Subst on Reply, posted by Emiliano Gabrielli on Fri Jul 8 10:52:36 2005  the "subst on reply" parameter seems to correctly work only on the first reply.. since the second reply has the author locked to the one having replyed the first time.       Re: Subst on Reply, posted by Stefan Ritt on Fri Jul 8 22:38:51 2005  [quote="Emiliano Gabrielli"]the "subst on reply" parameter seems to correctly work only on the first reply.. since the second reply has the author locked to the one having replyed the first time.          Re: Subst on Reply, posted by Emiliano Gabrielli on Sat Jul 9 14:13:10 2005  [quote="Stefan Ritt"] You need [code]Preset on reply Author = $short_name[/code]. [b]Subst[/b] is supposed to work [i]after[/i] a submission, [b]Preset[/b] before you open the edit mask. See this forum. If you reply to this entry, your name appears as the Author even if it's locked. Here is the config:   New Message Formatting and Default Settings, posted by Gary Clayson on Thu Jul 7 04:44:12 2005  Hello All. Please Help! How can I turn off the formatting controls above the message text when making a new or reply entry? I included the flat 'Default Encoding = 1' in my config file, but it seems to have no effect. The log has been set up to suppress all email notification, as SMTP is not being used at my location (MS Exchange Server is being used). Also How can I turn off the icon selection panel to the left of a new message text box? And, finally,       Re: New Message Formatting and Default Settings, posted by Gary Clayson on Thu Jul 7 05:26:36 2005  [quote="Gary Clayson"]Hello All. Please Help! How can I turn off the formatting controls above the message text when making a new or reply entry? I included the flat 'Default Encoding = 1' in my config file, but it seems to have no effect. The log has been set up to suppress all email notification, as SMTP is not being used at my location (MS Exchange Server is being used). Also How can I turn off the icon selection panel to the left of a new message text          Re: New Message Formatting and Default Settings, posted by Stefan Ritt on Thu Jul 7 08:43:37 2005  [quote="Gary Clayson"]I just downloaded and installed beta2 and most of my questions have been answered. I now have a new question: What are the possible settings with the 'Default Encoding' flag? Can I please get a rundown on this one as the config syntax page does not list this one. Thanks in Advance.[/quote]       Re: New Message Formatting and Default Settings, posted by Stefan Ritt on Thu Jul 7 09:11:45 2005  [quote="Gary Clayson"]How can I turn off the formatting controls above the message text when making a new or reply entry? I included the flat 'Default Encoding = 1' in my config file, but it seems to have no effect.[/quote]          Re: New Message Formatting and Default Settings, posted by Gary Clayson on Fri Jul 8 22:25:39 2005  [quote="Stefan Ritt"][quote="Gary Clayson"]How can I turn off the formatting controls above the message text when making a new or reply entry? I included the flat 'Default Encoding = 1' in my config file, but it seems to have no effect.[/quote]   Request: can the comment for a log book be put in the status bar on hover, posted by Tim Iskander on Wed Jul 6 16:02:30 2005  We have several logbooks running here with somewhat cryptic names. The comment field for the logbook describes its intent well enough, so the thought was that the comment could show up in the status bar (or tooltip) when you hover over the logbook name in the tabs at the top of the page.       Re: Request: can the comment for a log book be put in the status bar on hover, posted by Gary Clayson on Thu Jul 7 04:47:09 2005  [quote="Tim Iskander"]We have several logbooks running here with somewhat cryptic names. The comment field for the logbook describes its intent well enough, so the thought was that the comment could show up in the status bar (or tooltip) when you hover over the logbook name in the tabs at the top of the page.       Re: Request: can the comment for a log book be put in the status bar on hover, posted by Stefan Ritt on Thu Jul 7 21:48:31 2005  [quote="Tim Iskander"]We have several logbooks running here with somewhat cryptic names. The comment field for the logbook describes its intent well enough, so the thought was that the comment could show up in the status bar (or tooltip) when you hover over the logbook name in the tabs at the top of the page.[/quote]          Re: Request: can the comment for a log book be put in the status bar on hover, posted by Tim Iskander on Fri Jul 8 13:32:56 2005  [quote="Stefan Ritt"][quote="Tim Iskander"]We have several logbooks running here with somewhat cryptic names. The comment field for the logbook describes its intent well enough, so the thought was that the comment could show up in the status bar (or tooltip) when you hover over the logbook name in the tabs at the top of the page.[/quote]   A comprehensive listing of all commands elog performs, posted by Gary Clayson on Thu Jun 2 06:45:55 2005  Can someone please enter a comprehensive list of the commands eLog will honor. I'm trying to build a 'decent' start page and am not totally familiar with eLog just yet. Thanks Stefan for an awesome application. The documentation is really decent, too. I just have been unable to locate a list of all commands available.       Re: A comprehensive listing of all commands elog performs, posted by Emiliano Gabrielli on Fri Jun 3 18:11:09 2005  [quote="Gary Clayson"]Can someone please enter a comprehensive list of the commands eLog will honor. I'm trying to build a 'decent' start page and am not totally familiar with eLog just yet. Thanks Stefan for an awesome application. The documentation is really decent, too. I just have been unable to locate a list of all commands available.          Re: A comprehensive listing of all commands elog performs, posted by Gary Clayson on Thu Jul 7 04:49:19 2005  [quote="Emiliano Gabrielli"][quote="Gary Clayson"]Can someone please enter a comprehensive list of the commands eLog will honor. I'm trying to build a 'decent' start page and am not totally familiar with eLog just yet. Thanks Stefan for an awesome application. The documentation is really decent, too. I just have been unable to locate a list of all commands available.   [BUG] attach=1 and inline imgs, posted by Emiliano Gabrielli on Mon Jul 4 18:46:25 2005  There is a little difference in the way elog treats attachment's display in list and single message view... It has to be, but some beaviours can be seen as bugs:       Re: [BUG] attach=1 and inline imgs, posted by Stefan Ritt on Tue Jul 5 22:35:52 2005  [quote="Emiliano Gabrielli"]There is a little difference in the way elog treats attachment's display in list and single message view... It has to be, but some beaviours can be seen as bugs:   [BUG] show only new entries, posted by Emiliano Gabrielli on Wed Jun 22 11:04:41 2005  the new link "show only new entries" is very useful but seems to still have some problems: [LIST]       Re: [BUG] show only new entries, posted by Stefan Ritt on Fri Jun 24 22:44:03 2005  [quote="Emiliano Gabrielli"]the new link "show only new entries" is very useful but seems to still have some problems: [LIST]          Re: [BUG] show only new entries, posted by Emiliano Gabrielli on Mon Jun 27 15:09:12 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]the new link "show only new entries" is very useful but seems to still have some problems: [LIST]             Re: [BUG] show only new entries, posted by Emiliano Gabrielli on Mon Jul 4 12:16:13 2005  [quote="Emiliano Gabrielli"][quote="Stefan Ritt"] I added a "Show all entries" link to go back.                Re: [BUG] show only new entries, posted by Stefan Ritt on Mon Jul 4 22:44:03 2005  [quote="Emiliano Gabrielli"]Just tested the rev 1.686 .. now the link is displayed, but following the "Show only last" link the "attach=1" setting in the URL I use is removed, not being able to have inline attachment in full view.  They are displayed again when turning back to "Show all entries"[/quote]                   Re: [BUG] show only new entries, posted by Emiliano Gabrielli on Tue Jul 5 11:32:34 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]Just tested the rev 1.686 .. now the link is displayed, but following the "Show only last" link the "attach=1" setting in the URL I use is removed, not being able to have inline attachment in full view.  They are displayed again when turning back to "Show all entries"[/quote]                      Re: [BUG] show only new entries, posted by Stefan Ritt on Tue Jul 5 11:51:14 2005  [quote="Emiliano Gabrielli"]the following patch has to be applied over the one of you to complete it :-)[/quote] Ok, done.   [BUG] quick filter, posted by Emiliano Gabrielli on Thu Jun 23 11:03:18 2005  it seems that the select box of quick filters are showing also the "{n}" appended to the Attributes in order to obtain conditional Attributes ...  see the snapshot attached       Re: [BUG] quick filter, posted by Stefan Ritt on Fri Jun 24 22:23:50 2005  [quote="Emiliano Gabrielli"]it seems that the select box of quick filters are showing also the "{n}" appended to the Attributes in order to obtain conditional Attributes ...           Re: [BUG] quick filter, posted by Emiliano Gabrielli on Mon Jun 27 15:16:37 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]it seems that the select box of quick filters are showing also the "{n}" appended to the Attributes in order to obtain conditional Attributes ...              Re: [BUG] quick filter, posted by Emiliano Gabrielli on Mon Jun 27 15:19:05 2005  [quote="Emiliano Gabrielli"][quote="Stefan Ritt"][quote="Emiliano Gabrielli"]it seems that the select box of quick filters are showing also the "{n}" appended to the Attributes in order to obtain conditional Attributes ...                 Re: [BUG] quick filter, posted by Emiliano Gabrielli on Mon Jun 27 15:37:25 2005  [quote="Emiliano Gabrielli"][quote="Stefan Ritt"] Fixed in current CVS.   Cloning, posted by Gerfried Kumbartzki on Fri Jun 17 20:30:53 2005  Elog is installed on a laptop (Redhat Linux 2.4.20-8) for quite a while. I like to have a "base" of that logbook on a server and keep it in sync. Mirroring seem to be the perfect solution. For that I updated to elog v2.6.0 yesterday.         Re: Cloning, posted by Stefan Ritt on Fri Jun 17 22:08:28 2005  [quote="Gerfried Kumbartzki"]The elogd.cfg has a read and write passwd set. Any user can access the logbook, read and write after providing the proper user id and password.[/quote]          Re: Cloning, posted by Gerfried Kumbartzki on Wed Jun 22 18:34:18 2005  Thank you for the suggestions; I commented the read and write passwd in elogd.cfg out and only then I was able to clone (elogd -v -C http://laptop:8080) the logbook to the new server.  But this is only part of the story. The logbook on the labtop is owned by the             Re: Cloning, posted by Stefan Ritt on Fri Jun 24 21:24:55 2005  [quote="Gerfried Kumbartzki"]But this is only part of the story. The logbook on the labtop is owned by the default user elog and default group elog, that is needed to start up the elogd. Only a user "elog" can do the cloning, unless temporarily the owner ship in /usr/local/elog is changed.  I made it work by temporarily changing the owner ship on both machines, did the cloning, changed back to owner elog, started   elog crashes when admin tries to register new users, posted by Heiko Scheit on Wed May 18 14:18:07 2005  When pasting the URL for the registration of new users (with 'Self register = 3') elog crashes with segmentation fault.  I don't have the time currently to give you more debuging information but maybe you can have a look the same.  It crashes after        Re: elog crashes when admin tries to register new users, posted by Stefan Ritt on Sat Jun 4 12:25:57 2005  [quote="Heiko Scheit"]When pasting the URL for the registration of new users (with 'Self register = 3') elog crashes with segmentation fault.  I don't have the time currently to give you more debuging information but maybe you can have a look the same.  It crashes after           Re: elog crashes when admin tries to register new users, posted by Heiko Scheit on Thu Jun 9 15:20:04 2005  [quote="Stefan Ritt"][quote="Heiko Scheit"]When pasting the URL for the registration of new users (with 'Self register = 3') elog crashes with segmentation fault.  I don't have the time currently to give you more debuging information but maybe you can have a look the same.  It crashes after              Re: elog crashes when admin tries to register new users, posted by Stefan Ritt on Fri Jun 17 22:33:29 2005  [quote="Heiko Scheit"]The following appended after the base (!) URL results in a segmentation fault [CODE]                Re: elog crashes when admin tries to register new users, posted by Heiko Scheit on Tue Jun 21 19:24:58 2005  [quote] Thanks for that info. It helped me debugging things. The problem is that the "activation" URL does not contain a logbook if there is a global password file. I have never tried that so of course it crashes ;(                   email flagged as spam, posted by Heiko Scheit on Tue Jun 21 19:38:06 2005  [quote="Heiko Scheit"] I also saw that the format of the email notification has changed.  As I have scripts (bash, akw, procmail) that depend on this format I                      email flagged as spam, posted by Stefan Ritt on Fri Jun 24 21:15:14 2005  [quote="Heiko Scheit"] X-Spam-Score: 4.875 (****) ADDRESS_IN_SUBJECT, BAYES_00,HTML_40_50,     HTML_IMAGE_ONLY_24, HTML_MESSAGE, MIME_HEADER_CTYPE_ONLY,                   Re: elog crashes when admin tries to register new users, posted by Stefan Ritt on Fri Jun 24 21:02:05 2005  [quote="Heiko Scheit"]Not really, unless you have a fixed 2.5.9 version.  Version 2.6 has way too many new features, which I don't want at the moment.  Or is there a config option to get the old behavior?   prevent CVS and XML exports , posted by Paul Paquette on Mon Jun 20 04:29:57 2005  Hello Again,       I'm being asked to do the impossible to list the Assessing Dept Data but not letting people download the whole database.  This way they can lookup       Re: prevent CVS and XML exports , posted by Stefan Ritt on Fri Jun 24 20:45:41 2005  [quote="Paul Paquette"]I'm being asked to do the impossible to list the Assessing Dept Data but not letting people download the whole database.  This way they can lookup the info the Town uses to assess their property.  The Town’s Selectmen have stopped paying for the company who hosted the database and the software they used.  Now I'm asked to do the same service in house with out funds and without resorces.  Hence the question.     Menu text ignored??, posted by Emiliano Gabrielli on Tue Jun 7 15:48:53 2005  I tried to insert a row in the menu but it seems to totally ignore the command ... both inserting a filename and simply typeing "Menu text = <b>PIPPO</b>" brings to a page with *no* "PIPPO" in the HTML source ...        Re: Menu text ignored??, posted by Emiliano Gabrielli on Wed Jun 8 16:48:59 2005  [quote="Emiliano Gabrielli"]I tried to insert a row in the menu but it seems to totally ignore the command ... both inserting a filename and simply typeing "Menu text = <b>PIPPO</b>" brings to a page with *no* "PIPPO" in the HTML source ...           Re: Menu text ignored??, posted by Stefan Ritt on Fri Jun 17 22:37:59 2005  [quote="Emiliano Gabrielli"]uh oh ... just maked some tests before posting ... "Find Menu text" does my job !!!?!?!!!!   why "Find" in the name?  it is displayed in the list view, not Find ... Am I completely out?[/quote]             Re: Menu text ignored??, posted by Emiliano Gabrielli on Mon Jun 20 09:59:10 2005  [quote="Stefan Ritt"] Well, maybe I should allow both options "Find menu text" [b]and[/b] "List menu text", change it in the documentation, and in a year from now remove the "Find menu text".[/quote]   prevent CVS and XML exports, posted by Paul Paquette on Sat Jun 18 23:14:51 2005  Hello All and Happy Father's Day, How do I prevent Anonymous Users from exporting the Data when using the search funtion?       Re: prevent CVS and XML exports, posted by Stefan Ritt on Sun Jun 19 20:50:16 2005  [quote="Paul Paquette"]Hello All and Happy Father's Day, How do I prevent Anonymous Users from exporting the Data when using the search funtion?          Re: prevent CVS and XML exports, posted by Emiliano Gabrielli on Mon Jun 20 09:56:28 2005  [quote="Stefan Ritt"][quote="Paul Paquette"]Hello All and Happy Father's Day, How do I prevent Anonymous Users from exporting the Data when using the search funtion?   Unable to send mails through elog, posted by Kumar on Wed Jun 8 10:45:18 2005  Hi All I need to send mail through Elog. With Version 2.5.7 it seems to work only when less content is in the elog entry. But when I fill in a lot of content       Re: Unable to send mails through elog, posted by Stefan Ritt on Fri Jun 17 22:54:39 2005  [quote="Kumar"]Hi All I need to send mail through Elog. With Version 2.5.7 it seems to work only when less content is in the elog entry. But when I fill in a lot of content   reverse sort option does not work for quick filter, posted by Heiko Scheit on Wed May 18 14:12:02 2005  The 'reverse sort' option does not work for quick filter searches.  In the URL there is always written 'reverse=0'.  For normal 'Find' it works OK.       Re: reverse sort option does not work for quick filter, posted by Stefan Ritt on Sat Jun 4 12:21:21 2005  [quote="Heiko Scheit"]The 'reverse sort' option does not work for quick filter searches.  In the URL there is always written 'reverse=0'.  For normal 'Find' it works OK.[/quote]          Re: reverse sort option does not work for quick filter, posted by Heiko Scheit on Sat Jun 4 16:37:04 2005  [quote="Stefan Ritt"][quote="Heiko Scheit"]The 'reverse sort' option does not work for quick filter searches.  In the URL there is always written 'reverse=0'.  For normal 'Find' it works OK.[/quote]             Re: reverse sort option does not work for quick filter, posted by Stefan Ritt on Thu Jun 16 22:37:06 2005  I finally found some time to fix this problem. The fix is under CVS.   Moving eLog from Server to Server..., posted by Charles Duncan on Sat Jun 11 02:29:01 2005  I am moving my eLog system from one server to another. I moved all my log books, my /etc/elog.conf, and /usr/share/elog/elog.pwd file. Did I miss anything?       Re: Moving eLog from Server to Server..., posted by Stefan Ritt on Mon Jun 13 17:45:47 2005  [quote="Charles Duncan"]I am moving my eLog system from one server to another. I moved all my log books, my /etc/elog.conf, and /usr/share/elog/elog.pwd file. Did I miss anything? The Logbooks come up fine on the eLog list, but when I try to access them I get invalid user name...          Re: Moving eLog from Server to Server..., posted by Charles Duncan on Mon Jun 13 18:45:45 2005  [QUOTE][quote="Stefan Ritt"][quote="Charles Duncan"]I am moving my eLog system from one server to another. I moved all my log books, my /etc/elog.conf, and /usr/share/elog/elog.pwd file. Did I miss anything? The Logbooks come up fine on the eLog list, but when I try to access them I get invalid user name...             Re: Moving eLog from Server to Server..., posted by Charles Duncan on Wed Jun 15 00:20:56 2005  [quote="Charles Duncan"][QUOTE][quote="Stefan Ritt"][quote="Charles Duncan"]I am moving my eLog system from one server to another. I moved all my log books, my /etc/elog.conf, and /usr/share/elog/elog.pwd file. Did I miss anything? The Logbooks come up fine on the eLog list, but when I try to access them I get invalid user name...                Re: Moving eLog from Server to Server..., posted by Charles Duncan on Wed Jun 15 18:59:23 2005  [quote="Charles Duncan"][quote="Charles Duncan"][QUOTE][quote="Stefan Ritt"][quote="Charles Duncan"]I am moving my eLog system from one server to another. I moved all my log books, my /etc/elog.conf, and /usr/share/elog/elog.pwd file. Did I miss anything? The Logbooks come up fine on the eLog list, but when I try to access them I get invalid user name...   Find seems to ignore Start Date, posted by Emiliano Gabrielli on Tue Jun 7 16:52:27 2005  It seems that making a search in which one selects *only* a start date *and* a "last" number of days  does not works correctly .. Elog infact simply ignores the start date, showing the last N-days entries ..       Re: Find seems to ignore Start Date, posted by Emiliano Gabrielli on Tue Jun 7 17:59:54 2005  [quote="Emiliano Gabrielli"]It seems that making a search in which one selects *only* a start date *and* a "last" number of days  does not works correctly .. Elog infact simply ignores the start date, showing the last N-days entries ..   elog & firefox pipelining, posted by Emiliano Gabrielli on Mon Jun 6 12:28:21 2005  Having the Firefox pipelining feature enabled makes elog unable to correctly show avery attachment in the full view when a quite large number of them is present.. disabling pipelining makes all works fine again       Re: elog & firefox pipelining, posted by Stefan Ritt on Mon Jun 6 15:17:50 2005  [quote="Emiliano Gabrielli"]Having the Firefox pipelining feature enabled makes elog unable to correctly show avery attachment in the full view when a quite large number of them is present.. disabling pipelining makes all works fine again[/quote]          Re: elog & firefox pipelining, posted by Emiliano Gabrielli on Tue Jun 7 13:12:25 2005  [quote="Stefan Ritt"][quote="Emiliano Gabrielli"]Having the Firefox pipelining feature enabled makes elog unable to correctly show avery attachment in the full view when a quite large number of them is present.. disabling pipelining makes all works fine again[/quote]   shell exec not working, posted by Emiliano Gabrielli on Mon Jun 6 12:25:53 2005  It seems that, since Fri 2005-06-03, 12:50 almost, the shell exec feature is not invoked anymore. the -x flag is present in the command line and the elog.cfg Parameters are present both for edit and for insert.. I'm not disabling shell exec by the checkbox       Re: shell exec not working, posted by Emiliano Gabrielli on Mon Jun 6 12:43:48 2005  [quote="Emiliano Gabrielli"]It seems that, since Fri 2005-06-03, 12:50 almost, the shell exec feature is not invoked anymore. the -x flag is present in the command line and the elog.cfg Parameters are present both for edit and for insert.. I'm not disabling shell exec by the checkbox   password encryption, posted by Alex H on Fri May 20 14:40:12 2005  Hi Stefan, I have found a little problem with elog. I'am using ELOG V2.5.8-6. When I'am on the logon page,       Re: password encryption, posted by Stefan Ritt on Fri May 27 14:48:05 2005  [quote="Alex H"]Hi Stefan, I have found a little problem with elog. I'am using ELOG V2.5.8-6. When I'am on the logon page,          Re: password encryption, posted by Alex H on Mon May 30 10:01:14 2005  [quote="Stefan Ritt"][quote="Alex H"]Hi Stefan, I have found a little problem with elog. I'am using ELOG V2.5.8-6. When I'am on the logon page,       Re: password encryption, posted by Gary Clayson on Mon May 30 19:18:34 2005  Hello Alex and Stefan, I know of only one way to "hide" the text of the status bar in a web browser;          Re: password encryption, posted by Emiliano Gabrielli on Mon May 30 19:56:01 2005  [quote="Gary Clayson"]Hello Alex and Stefan, I know of only one way to "hide" the text of the status bar in a web browser;             Re: password encryption, posted by Stefan Ritt on Mon May 30 20:16:11 2005  [quote="Emiliano Gabrielli"] I don't have double checked .. but .. why we need to pass the sensible information in the Query String ?? Are you sure that putting it in an hidden field (and eventualli using a GET methon in the <form>-tag) can't be a solution?[/quote]                Re: password encryption, posted by Alex H on Tue May 31 09:07:37 2005  Thanks Stefan 8)       Re: password encryption, posted by Stefan Ritt on Sat Jun 4 14:00:17 2005  [quote="Alex H"]I have found a little problem with elog. I'am using ELOG V2.5.8-6. When I'am on the logon page, I type my Login and password and hit "submit", in the bottom of IE, we can show my password without encryption, it can be dangerous. I have made a screenshot to explain my problem better.   Logbook locking issue, posted by Steve Jones on Tue May 17 21:38:36 2005  [I][B]Stefan, any ideas on this problem?[/B][/I] [QUOTE]Our eLog is set to create logbook entry locks and after 30minutes prevent one from re-editing an entry, thus forcing a REPLY to be created.       Re: Logbook locking issue, posted by Steve Jones on Wed Jun 1 16:14:22 2005  [quote="Steve Jones"][I][B]Stefan, any ideas on this problem?[/B][/I] [QUOTE]Our eLog is set to create logbook entry locks and after 30minutes prevent one from re-editing an entry, thus forcing a REPLY to be created.       Re: Logbook locking issue, posted by Stefan Ritt on Wed Jun 1 16:33:54 2005  Sorry about my unusual slow response, but I'm pretty busy these days. I hope I will be able to address this problem in a two weeks from now. [quote="Steve Jones"][I][B]Stefan, any ideas on this problem?[/B][/I]          Re: Logbook locking issue, posted by Steve Jones on Wed Jun 1 21:00:01 2005  [quote="Steve Jones"]Stefan, not a problem.  ITMT, any idea how I can manually clear this "lock"?  Is it embedded in the logbook itself? [quote="Stefan Ritt"]Sorry about my unusual slow response, but I'm pretty busy these days. I hope I will be able to address this problem in a two weeks             Re: Logbook locking issue, posted by Stefan Ritt on Sat Jun 4 13:06:08 2005  [quote="Steve Jones"]Stefan, not a problem.  ITMT, any idea how I can manually clear this "lock"?  Is it embedded in the logbook itself?[/quote] I would recommend to remove the [b]Restrict edit time = 0.5[/b] temporarily from your config file, then edit this entry, the clicking [b]Back[/b] instead   Incorrect Display, posted by David Spindler on Sat May 21 15:05:23 2005  I hope this is the correct place for an apparent bug report. The display is incorrect except when displaying a particular entry. I just downloaded 2.6.0-beta thinking I was getting 2.5.9. Nice surprise. The elcode (bbcode? ) is a great idea, but the display, when showing the main screen of a logbook does not have the correct fields showing in the correct places. I will attach two screen captures for illustraton. Never mind, I guess not. It is not letting me       Re: Incorrect Display, posted by David Spindler on Sat May 21 15:23:08 2005  [quote="David Spindler"]I hope this is the correct place for an apparent bug report. The display is incorrect except when displaying a particular entry. I just downloaded 2.6.0-beta thinking I was getting 2.5.9. Nice surprise. The elcode (bbcode? ) is a great idea, but the display, when showing the main screen of a logbook does not have the correct fields showing in the correct places. I will attach two screen captures for illustraton. Never mind, I guess          Re: Incorrect Display, posted by David Spindler on Mon May 23 17:47:24 2005  Never mind. I figured it out. I used two fields (date and time) that are automatically placed in elog. It messed up the spacing, altough what was puzzling was that it displayed correctly on the entry itself, but not the list. Anyway, I renamed the date and time to another name and it is ok.             Re: Incorrect Display, posted by Geoffrey Carman on Fri Jun 3 17:34:44 2005  [quote="David Spindler"] BTW, I love elog and have it running at work. It is being used extensively.[/quote]                Re: Incorrect Display, posted by Emiliano Gabrielli on Fri Jun 3 18:02:25 2005  [quote="Geoffrey Carman"][quote="David Spindler"] BTW, I love elog and have it running at work. It is being used extensively.[/quote]                   Re: Incorrect Display, posted by Stefan Ritt on Sat Jun 4 10:59:52 2005  I finally found some time to fix the [i]pippo-bug[/i] ;).  It had to do with the request that one can turn on and off the summary lines of the text body in [b]Guest list display[/b]. So if this option does not   Problem with auto-increment attribute, posted by Andy on Tue May 24 20:32:08 2005  I have a very strange problem with auto-increment attribute. Here is a part of my configuration: Attributes = Access ID, Harvest Date, Access, Species, PI, Submission date, Stain, Comments   error message from this forum, posted by Heiko Scheit on Wed May 18 14:20:23 2005  Just after submitting the last message, the following error message was displayed: Error sending Email via "mailsend.psi.ch": malformed address: synergie-infcom>       Re: error message from this forum, posted by Stefan Ritt on Wed May 18 19:52:41 2005  [quote="Heiko Scheit"]Just after submitting the last message, the following error message was displayed: Error sending Email via "mailsend.psi.ch": malformed address: synergie-infcom>[/quote]   post box question, posted by damon nettles on Sat May 7 17:51:22 2005  is there any way to get a larger text box to type in when making a new post? the default box is rather small and you have to scroll up and down when making a new post or editing an existing one.       Re: post box question, posted by Stefan Ritt on Mon May 9 11:30:07 2005  > is there any way to get a larger text box to type in when making a new post? > the default box is rather small and you have to scroll up and down when > making a new post or editing an existing one.          Re: post box question, posted by damon nettles on Thu May 12 18:32:18 2005  > > is there any way to get a larger text box to type in when making a new post? > > the default box is rather small and you have to scroll up and down when > > making a new post or editing an existing one.   elogd crashes on log out, posted by Kevin Robinder on Wed Apr 27 21:27:25 2005  Since updating to version 2.5.8 we have been having problems with the elogd  service crashing whenever anyone attempts to log out. We are using stunnel  4.09 on a Win 2k system.       Re: elogd crashes on log out, posted by Stefan Ritt on Fri Apr 29 21:30:26 2005  It's hard to tell the problem from what you report. Have you tried the latest release http://midas.psi.ch/elog/download/windows/elog258-6.exe ? There were some problems with the password file in 2.5.8 versions prior to patch level 6.          Re: elogd crashes on log out, posted by Kevin Robinder on Sat Apr 30 19:10:22 2005  > It's hard to tell the problem from what you report. Have you tried the latest > release http://midas.psi.ch/elog/download/windows/elog258-6.exe ? There were > some problems with the password file in 2.5.8 versions prior to patch level 6.             Re: elogd crashes on log out, posted by Stefan Ritt on Mon May 2 09:33:51 2005  > What other information can I provide that might assist in diagnosing this? Please send me your elogd.cfg configuration file.                Re: elogd crashes on log out, posted by Matt B on Fri May 6 18:41:04 2005  > > What other information can I provide that might assist in diagnosing this? >  > Please send me your elogd.cfg configuration file.                   Re: elogd crashes on log out, posted by Matt B on Fri May 6 20:32:49 2005  Another quick update on this, it looks like the bug was introduced in version 2.5.8-2 built Mar 30 2005, 11:04:33, revision 1.611       Re: elogd crashes on log out, posted by Stefan Ritt on Mon May 9 13:12:26 2005  > Since updating to version 2.5.8 we have been having problems with the elogd  > service crashing whenever anyone attempts to log out. We are using stunnel  > 4.09 on a Win 2k system.          Re: elogd crashes on log out, posted by Kevin Robinder on Wed May 11 21:39:12 2005  > > Since updating to version 2.5.8 we have been having problems with the elogd  > > service crashing whenever anyone attempts to log out. We are using stunnel  > > 4.09 on a Win 2k system.   Version of GCC to use?, posted by Steve Jones on Mon May 9 20:23:59 2005  What is the recommended version of gcc to use with elog 2.5.9?  I searched the discussion database but found nothing pertaining to this.        Re: Version of GCC to use?, posted by Stefan Ritt on Mon May 9 20:47:02 2005  > What is the recommended version of gcc to use with elog 2.5.9?  I searched > the discussion database but found nothing pertaining to this.           Re: Version of GCC to use?, posted by Steve Jones on Mon May 9 20:51:23 2005  > > What is the recommended version of gcc to use with elog 2.5.9?  I searched > > the discussion database but found nothing pertaining to this.  >              Re: Version of GCC to use?, posted by Stefan Ritt on Mon May 9 20:55:36 2005  > I ask because I get a dependency that I did not have before with 2.5.3.  > Compiling with my same 'ole gcc 2.95.2 I see that I now need mxml.h and > strlcpy.h.  Trying to compile under gcc 3.4 results in all kinds of errors.                Re: Version of GCC to use?, posted by Steve Jones on Mon May 9 20:58:11 2005  > > I ask because I get a dependency that I did not have before with 2.5.3.  > > Compiling with my same 'ole gcc 2.95.2 I see that I now need mxml.h and > > strlcpy.h.  Trying to compile under gcc 3.4 results in all kinds of errors.                   Re: Version of GCC to use?, posted by Steve Jones on Mon May 9 21:08:56 2005  > > > I ask because I get a dependency that I did not have before with 2.5.3.  > > > Compiling with my same 'ole gcc 2.95.2 I see that I now need mxml.h and > > > strlcpy.h.  Trying to compile under gcc 3.4 results in all kinds of errors.                      Re: Version of GCC to use?, posted by Steve Jones on Mon May 9 21:14:53 2005  > > > > I ask because I get a dependency that I did not have before with 2.5.3.  > > > > Compiling with my same 'ole gcc 2.95.2 I see that I now need mxml.h and > > > > strlcpy.h.  Trying to compile under gcc 3.4 results in all kinds of errors.                      Re: Version of GCC to use?, posted by Stefan Ritt on Mon May 9 21:17:29 2005  > Ok, now I see the issue - the tar extract created the mxml directory in the root (not > under the created directory elog-2.5.9).  Is there a reason why these includes are not > placed in the src dir like the regex.h/.c include?                         Re: Version of GCC to use?, posted by Stefan Ritt on Mon May 9 21:22:46 2005  [ritt@pc5082 /tmp]$ tar -xzvf elog-2.5.9-2.tar.gz elog-2.5.9/ elog-2.5.9/doc/                            Re: Version of GCC to use?, posted by Steve Jones on Mon May 9 23:30:11 2005  > [ritt@pc5082 /tmp]$ tar -xzvf elog-2.5.9-2.tar.gz > elog-2.5.9/ > elog-2.5.9/doc/   link loss and crash of elogd.exe, posted by Ulrich Trüssel on Mon May 9 17:59:09 2005  Just upgraded from stable running 2.5.2-2 to 2.5.9-2 in case of the usable Duplicate function. After the problem discribed below i made a new, clean installation again and played araound with the demo logbook, copying my   How to remove email addresses from Guest Display?, posted by Johan Nyberg on Mon May 9 11:45:05 2005  Hi, I would like to have the author email addresses listed only for users which       Re: How to remove email addresses from Guest Display?, posted by Stefan Ritt on Mon May 9 14:46:54 2005  > I would like to have the author email addresses listed only for users which > have logged in, but not for guest users. In the elogd.cfg file I have: >           Re: How to remove email addresses from Guest Display?, posted by Johan Nyberg on Mon May 9 16:37:08 2005  > > I would like to have the author email addresses listed only for users which > > have logged in, but not for guest users. In the elogd.cfg file I have: > >    per entry "expand" in threaded view, posted by Emiliano Gabrielli on Mon May 2 12:39:36 2005  is it possible to make the "+" sign, indicating a thread in the threaded view, to be clickable in order to be able to expand a single thread each time ?       Re: per entry "expand" in threaded view, posted by Stefan Ritt on Mon May 2 13:02:58 2005  > of course elog should remember the choice, so it will be possible to expand > N threads over the M total ones..          Re: per entry "expand" in threaded view, posted by Emiliano Gabrielli on Mon May 2 13:31:18 2005  > > of course elog should remember the choice, so it will be possible to expand > > N threads over the M total ones.. >              Re: per entry "expand" in threaded view, posted by Stefan Ritt on Mon May 2 13:37:03 2005  > A way may be using cookies, otherwise one can implement a kind o session mechanism > (using cookies or QS to pass sessid and storing user data on the server for a limited > time...)                Re: per entry "expand" in threaded view, posted by Emiliano Gabrielli on Mon May 2 14:49:47 2005  > > A way may be using cookies, otherwise one can implement a kind o session mechanism > > (using cookies or QS to pass sessid and storing user data on the server for a limited > > time...)                   Re: per entry "expand" in threaded view, posted by Stefan Ritt on Mon May 2 14:51:43 2005  > ok, i've downgraded my request then ... >  > it will be still useful to have the possibility of expland selectively a single thread :-)                      Re: per entry "expand" in threaded view, posted by Emiliano Gabrielli on Mon May 2 15:37:11 2005  > > ok, i've downgraded my request then ... > >  > > it will be still useful to have the possibility of expland selectively a single thread :-)                         Re: per entry "expand" in threaded view, posted by Stefan Ritt on Mon May 2 16:01:13 2005  > LOL ..this way I can't see the list of other threads .. so il my goal is to inspect the thread > looking for something I have to: > - open the 3d   rss feed title & conditional attributes, posted by Emiliano Gabrielli on Mon May 2 12:29:11 2005  When I define 2 attributes, by default and the second one has to be showed depending on the first one value the elog correctly handle the thing, but       Re: rss feed title & conditional attributes, posted by Stefan Ritt on Mon May 2 13:27:16 2005  > When I define 2 attributes, by default and the second one has to be showed > depending on the first one value the elog correctly handle the thing, but > the rss feed shows an empty comma separeted field corresponding to the          Re: rss feed title & conditional attributes, posted by Emiliano Gabrielli on Mon May 2 13:34:12 2005  > > When I define 2 attributes, by default and the second one has to be showed > > depending on the first one value the elog correctly handle the thing, but > > the rss feed shows an empty comma separeted field corresponding to the             Re: rss feed title & conditional attributes, posted by Stefan Ritt on Mon May 2 14:58:27 2005  Ok, fixed. I do however not evaluate the conditional attribute, but just remove any empty attribute, I guess that makes more sense.                Re: rss feed title & conditional attributes, posted by Emiliano Gabrielli on Mon May 2 15:40:02 2005  > Ok, fixed. I do however not evaluate the conditional attribute, but just remove any > empty attribute, I guess that makes more sense.   search and filters in a cookie !?, posted by Emiliano Gabrielli on Mon May 2 12:34:52 2005  Is it possible to have last runtime filtering and viewing method to be stored in a cookie in order to make them permanent across navigation ?       Re: search and filters in a cookie !?, posted by Stefan Ritt on Mon May 2 13:28:09 2005  > Is it possible to have last runtime filtering and viewing method to be > stored in a cookie in order to make them permanent across navigation ?   Filter with match case, posted by Alex H on Thu Apr 28 10:29:33 2005  Hello Stefan, I have an question for you :o). Is there any solution to use the filtering        Re: Filter with match case, posted by Stefan Ritt on Fri Apr 29 22:05:51 2005  > I have an question for you :o). Is there any solution to use the filtering  > system with an match case solution ? Add a parameter or something else to  > add a solution ?    MOptions : How that really work ?, posted by Alex H on Thu Apr 28 15:20:27 2005  Hi, Is there anybody that use the MOptions ? I'am searching some example to understand this fonction could you help        Re: MOptions : How that really work ?, posted by Stefan Ritt on Thu Apr 28 15:42:42 2005  > Is there anybody that use the MOptions ? > I'am searching some example to understand this fonction could you help  > me ? :)   More questions about groups, posted by Stephen A. Wood on Tue Apr 19 22:43:10 2005  I am running 2.5.8-3 with the elogd.c 1.632.  I have attached the config file that I am using.   I have a top group "src", with logbooks "SRC Analysis" and "SRC Mail" in it.  These two logbooks share the same password       Re: More questions about groups, posted by Stefan Ritt on Thu Apr 21 22:54:46 2005  > I am running 2.5.8-3 with the elogd.c 1.632.  I have attached the config > file that I am using.   I have a top group "src", with logbooks "SRC > Analysis" and "SRC Mail" in it.  These two logbooks share the same password          Re: More questions about groups, posted by Stephen A. Wood on Fri Apr 22 18:16:25 2005  > Thanks for reporting this bug. I fixed it in the current CVS version. I get my Icons and Graphics in the top group now.  Thanks for fixing it.   Directories in top groups, posted by Stephen A. Wood on Mon Apr 18 17:02:20 2005  I am trying to unify several existing logbook collections that run on seperate servers under a single server using groups.  For a top group, under "[global topgroupname]", I would like to redefine the resource directory or       Re: Directories in top groups, posted by Stefan Ritt on Mon Apr 18 21:57:19 2005  > I am trying to unify several existing logbook collections that run on > seperate servers under a single server using groups.  For a top group, under > "[global topgroupname]", I would like to redefine the resource directory or   Link To command..., posted by Tim Iskander on Mon Apr 18 17:57:38 2005  Is it possible to create a Link To command (ala Copy To, Move To) that would allow you to reference an entry in another log book without copying it? This would be handy as the info would be kept current in both log books.       Re: Link To command..., posted by Stefan Ritt on Mon Apr 18 19:27:09 2005  > Is it possible to create a Link To command (ala Copy To, Move To) that > would allow you to reference an entry in another log book without copying it? > This would be handy as the info would be kept current in both log books.   Mail not sent but message says it has been sent, posted by Mikael Salonvaara on Sun Apr 17 09:35:30 2005  If my email host refuses to send the email (476 connections denied), we still get the message that the email has been sent - and no error message.       Re: Mail not sent but message says it has been sent, posted by Stefan Ritt on Mon Apr 18 09:04:21 2005  > If my email host refuses to send the email (476 connections denied), we > still get the message that the email has been sent - and no error message. >    logbook clone, posted by Emiliano Gabrielli on Thu Apr 14 12:38:04 2005  When I create a new logbook (I used an existing one as a template) elog   does not works anymore...            Re: logbook clone, posted by Stefan Ritt on Fri Apr 15 22:26:06 2005  > When I create a new logbook (I used an existing one as a template) elog   > does not works anymore...     MIME encoding of mail?, posted by Michael Husbyn on Thu Feb 10 09:03:02 2005  Hello, This software is very good :) I like it, but I have some trouble with some       Re: MIME encoding of mail?, posted by Stefan Ritt on Sat Feb 12 18:00:48 2005  What you can try is to debug the communication between elogd and the SMTP server. Just turn on logging via          Re: MIME encoding of mail?, posted by Michael Husbyn on Thu Apr 14 15:07:18 2005  > What you can try is to debug the communication between elogd and the SMTP > server. Just turn on logging via >              Re: MIME encoding of mail?, posted by Stefan Ritt on Thu Apr 14 15:42:44 2005  > What I can see is that it sends with charset=US-ASCII, even if the characters are > non-US.                Re: MIME encoding of mail?, posted by Michael Husbyn on Fri Apr 15 15:12:55 2005  > > What I can see is that it sends with charset=US-ASCII, even if the characters are > > non-US. >                    Re: MIME encoding of mail?, posted by Stefan Ritt on Fri Apr 15 15:25:30 2005  So you tell me that the message body is ok with Norwegian characters, it's only the subject? That would mean that outlook interpretes the charset only for the message body, but not for the subject. So if you have characters with an ASCII value greater than 127, your mail                      Re: MIME encoding of mail?, posted by Stefan Ritt on Fri Apr 15 15:57:53 2005  Ok, I found it. It's in RFC2047 at http://www.faqs.org/rfcs/rfc2047.html                         Re: MIME encoding of mail?, posted by Stefan Ritt on Fri Apr 15 21:10:27 2005  I implemented this, but found some problems. If I encode the subject like Subject: =?ISO-8859-1?Q?åøæ?=                            Re: MIME encoding of mail?, posted by Michael Husbyn on Fri Apr 15 21:31:26 2005  > I implemented this, but found some problems. If I encode the subject like >  > Subject: =?ISO-8859-1?Q?åøæ?=                               Re: MIME encoding of mail?, posted by Stefan Ritt on Fri Apr 15 21:49:00 2005  > If I read the RFC correctly when you use B encoding you are using BASE64 encoding. > Maybe that could be a solution?                                  Re: MIME encoding of mail?, posted by Michael Husbyn on Fri Apr 15 22:24:49 2005  > > If I read the RFC correctly when you use B encoding you are using BASE64 encoding. > > Maybe that could be a solution? >        Re: MIME encoding of mail?, posted by Stefan Ritt on Fri Apr 15 21:14:05 2005  > Subject: Testing åøæ >  > Becomes   Conditional conditions?, posted by Steve Woughter on Tue Apr 12 16:07:12 2005  Can conditional attributes be assigned as conditions? Arbitraty Example:       Re: Conditional conditions?, posted by Stefan Ritt on Wed Apr 13 10:06:56 2005  > Can conditional attributes be assigned as conditions? Well, I guess the question was: "Can you implement this?" I'm sure that you   XML password files, replication & FreeBSD, posted by G on Tue Apr 12 01:05:20 2005  Ok this really is 2 questions. 1)       Re: XML password files, replication & FreeBSD, posted by Stefan Ritt on Tue Apr 12 09:30:51 2005  > I have been running ELOG on FreeBSD no problem for a year now, > but this new version 2.5.8-x doesn't seem to wanna work, it compiles fine  > with a few warnings (see attached logs).          Re: XML password files, replication & FreeBSD, posted by G on Wed Apr 13 00:40:55 2005  > > I have been running ELOG on FreeBSD no problem for a year now, > > but this new version 2.5.8-x doesn't seem to wanna work, it compiles fine  > > with a few warnings (see attached logs).             Re: XML password files, replication & FreeBSD, posted by Stefan Ritt on Wed Apr 13 09:06:46 2005  > Ok, i see, the problem for me now is that this attribute name has been in use for  > half a year or so by me. So now I have 100's of logbook entries with the old name  > in them, if I change it's name then all old logbook entries will show up with that    Default Date Format, posted by David Egolf on Mon Apr 11 23:01:37 2005  Hello, I downloaded the latest file and installed but the version number stayed at        Re: Default Date Format, posted by Stefan Ritt on Tue Apr 12 09:13:27 2005  > I downloaded the latest file and installed but the version number stayed at  > 2.5.8-2 and did not change to -3.   Segmentation fault when searching for empty regex, posted by Heiko Scheit on Mon Apr 11 13:52:29 2005  Segmentation fault when searching for empty regex --------------------------------------------------       Re: Segmentation fault when searching for empty regex, posted by Stefan Ritt on Mon Apr 11 21:22:25 2005  I applied a similar fix like you proposed, just omit highlighting at all if I get a zero length match. Changes committed to CVS.   Lost cfg file, posted by David Egolf on Sat Apr 9 03:40:26 2005  I was upgrading to the latest version and I wrote over my cfg file. I  still have my database files. Is there a way to put the cfg file back  together using the database files as a guide.  It did not seem to want to        Re: Lost cfg file, posted by Stefan Ritt on Sat Apr 9 09:52:23 2005  > I was upgrading to the latest version and I wrote over my cfg file. I  > still have my database files. Is there a way to put the cfg file back  > together using the database files as a guide.  It did not seem to want to           Re: Lost cfg file, posted by David Egolf on Mon Apr 11 18:48:18 2005  > > I was upgrading to the latest version and I wrote over my cfg file. I  > > still have my database files. Is there a way to put the cfg file back  > > together using the database files as a guide.  It did not seem to want to              Re: Lost cfg file, posted by Stefan Ritt on Mon Apr 11 20:15:01 2005  > Thank you so much for working with me on this.  The RSS reader I have been trying  > is at http://www.rssreader.com   and is version 1.0.88.0  It is a free RSS reader  > and seems to work very well.  It has a username and password system, but I am not    Howto Set Default Fonts in Editor Window?, posted by Gregory M. Caughey on Sun Apr 10 07:35:09 2005  Hello, I have been running Elog for a long time on a variety of RedHat releases, (this is a terrific project by the way). Currently running Elog v2.5.7 on        Re: Howto Set Default Fonts in Editor Window?, posted by Stefan Ritt on Sun Apr 10 09:36:07 2005  > Hello, > I have been running Elog for a long time on a variety of RedHat releases, > (this is a terrific project by the way). Currently running Elog v2.5.7 on    Selective emails, posted by David Egolf on Sat Apr 9 06:07:42 2005  I have a question about sending emails. I have a customer service ELog  currently running but I would like to have an option to be able to pick  from a list of people, one or more than one to send emails to with the        Re: Selective emails, posted by Stefan Ritt on Sat Apr 9 10:24:37 2005  > I have a question about sending emails. I have a customer service ELog  > currently running but I would like to have an option to be able to pick  > from a list of people, one or more than one to send emails to with the    Howto subscribe to ELOG RSS feeds in Mozilla Thunderbird, posted by Stefan Ritt on Fri Apr 8 14:35:19 2005  So subscribe to ELOG RSS feeds, do the following: - In Thunderbird, click "Tools/Account setting", then click "Add account",   HTML-File as attachement, posted by Becher on Tue Apr 5 22:39:20 2005  When I upload a HTML-File as attachement the file is shown as the HTML-source and not as the formatted text. Is there a possibility to see the HTML-attachements as formatted text like images are shown as images?       Re: HTML-File as attachement, posted by Stefan Ritt on Tue Apr 5 22:45:22 2005  > When I upload a HTML-File as attachement the file is shown as the > HTML-source and not as the formatted text. Is there a possibility to see the > HTML-attachements as formatted text like images are shown as images?          Re: HTML-File as attachement, posted by Becher on Wed Apr 6 14:45:22 2005  Yesterday I mad a little experiment: I copied in OpenOffice the content from my HTML file, which was not shown correctly in ELOG, to a new HTML file, uploaded it in ELOG, and now my file was shown             Re: HTML-File as attachement, posted by Stefan Ritt on Wed Apr 6 14:56:09 2005  > Yesterday I mad a little experiment: > I copied in OpenOffice the content from my HTML file, which was not shown correctly > in ELOG, to a new HTML file, uploaded it in ELOG, and now my file was shown                Re: HTML-File as attachement, posted by Stefan Ritt on Wed Apr 6 21:26:19 2005  Ok, I turned display of HTML attachments completely off in 2.5.8-3. So if one wants to see it, on has to click on it. Otherwise there is no way to ensure a correct web page, so people would complain again that the page does not pass the HTML validator if someone                   Re: HTML-File as attachement, posted by Becher on Wed Apr 6 23:02:47 2005  I think this is reasonable. All the HTML-files which I want insert (created with the software INCA) are not shown correctly. My testfiles made with OpenOffice are shown correctly. Maybe you have the time to program an option for the attachement "Show inside/Show in new window or                      Re: HTML-File as attachement, posted by Stefan Ritt on Thu Apr 7 22:18:04 2005  > I think this is reasonable. All the HTML-files which I want insert (created with the software > INCA) are not shown correctly. My testfiles made with OpenOffice are shown correctly. Maybe > you have the time to program an option for the attachement "Show inside/Show in new window or   Conditional Attributes/Preset Text, posted by David Brody on Wed Apr 6 01:51:42 2005  I upgraded from ver 2.5.5-2 to 2.5.8-2 and found that none of my preset text worked any longer.  I struggled with it for several hours and then reverted back to 2.5.5-2 and the preset text worked again.  I have attached my       Re: Conditional Attributes/Preset Text, posted by Stefan Ritt on Wed Apr 6 21:15:03 2005  > I upgraded from ver 2.5.5-2 to 2.5.8-2 and found that none of my preset text > worked any longer.  I struggled with it for several hours and then reverted > back to 2.5.5-2 and the preset text worked again.  I have attached my          Re: Conditional Attributes/Preset Text, posted by David Brody on Thu Apr 7 00:51:05 2005  > > I upgraded from ver 2.5.5-2 to 2.5.8-2 and found that none of my preset text > > worked any longer.  I struggled with it for several hours and then reverted > > back to 2.5.5-2 and the preset text worked again.  I have attached my   Want to change Entry time when using Copy To, posted by Michael Husbyn on Thu Mar 31 16:29:07 2005  Hello, Tried to use the copy to version, just to create a new copy of a old case in       Re: Want to change Entry time when using Copy To, posted by Stefan Ritt on Thu Mar 31 16:31:41 2005  > What I want is to have the Entry time to be updated to the time it was > copyed, not the original entry time. Moved To should perhaps retain its > original time?          Re: Want to change Entry time when using Copy To, posted by Michael Husbyn on Thu Mar 31 21:42:58 2005  > > What I want is to have the Entry time to be updated to the time it was > > copyed, not the original entry time. Moved To should perhaps retain its > > original time?             Re: Want to change Entry time when using Copy To, posted by Stefan Ritt on Thu Mar 31 21:59:21 2005  > The idea is good, but it does not work for me. What happens when I do this is > that I get a new ID, but the old ID is deleted.... It disappears from the list, > and if you try to access it manually it says that it is deleted.                Re: Want to change Entry time when using Copy To, posted by Michael Husbyn on Thu Mar 31 22:06:37 2005  > > The idea is good, but it does not work for me. What happens when I do this is > > that I get a new ID, but the old ID is deleted.... It disappears from the list, > > and if you try to access it manually it says that it is deleted.                   Re: Want to change Entry time when using Copy To, posted by Stefan Ritt on Thu Mar 31 22:15:34 2005  > But I want a duplicate entry of the entry.... so that I can reuse the text and other > items and just change the entrys that need to be changed. >                       Re: Want to change Entry time when using Copy To, posted by Michael Husbyn on Thu Mar 31 22:22:40 2005  > > But I want a duplicate entry of the entry.... so that I can reuse the text and other > > items and just change the entrys that need to be changed. > >                          Re: Want to change Entry time when using Copy To, posted by Stefan Ritt on Thu Mar 31 22:40:43 2005  > or your idea is good as well. Ok, I implemented a 'Duplicate' command (see this forum for example). I guess this is clearer                            Re: Want to change Entry time when using Copy To, posted by Michael Husbyn on Thu Mar 31 22:49:08 2005  > > or your idea is good as well. >  > Ok, I implemented a 'Duplicate' command (see this forum for example). I guess this is clearer   Preset text Dont work more!, posted by Alex H on Fri Mar 25 16:00:55 2005  Hi, I'am using Elog V2.5.8-1 and the "Preset Text" option don't work more since  I've updated Elog. could you fix it?       Re: Preset text Dont work more!, posted by Stefan Ritt on Tue Mar 29 11:30:25 2005  > I'am using Elog V2.5.8-1 and the "Preset Text" option don't work more since  > I've updated Elog. could you fix it?          Re: Preset text Dont work more!, posted by Alex H on Tue Mar 29 13:29:56 2005  > > I'am using Elog V2.5.8-1 and the "Preset Text" option don't work more  since  > > I've updated Elog. could you fix it?             Re: Preset text Dont work more!, posted by Stefan Ritt on Tue Mar 29 13:55:58 2005  > Here is my elogd.cfg. > I hope this will help you :)                Re: Preset text Dont work more!, posted by Alex H on Wed Mar 30 17:09:27 2005  > > Here is my elogd.cfg. > > I hope this will help you :) >                    Re: Preset text Dont work more!, posted by Stefan Ritt on Wed Mar 30 17:11:33 2005  > I've change my Attribute "Maint." to "Maint" in my elogd.cfg and in my Logbook too  > but the problem is the same, I have restarted the service but the problem is still  > here. Any idea? o_O                      Re: Preset text Dont work more!, posted by Alex H on Thu Mar 31 09:37:12 2005  > > I've change my Attribute "Maint." to "Maint" in my elogd.cfg and in my  Logbook too  > > but the problem is the same, I have restarted the service but the                          Re: Preset text Dont work more!, posted by Stefan Ritt on Thu Mar 31 09:46:21 2005  > Yes I have upgraded Elog to 2.5.8-2. > I submit my new elogd.cfg file maybe it will help you. > I have try the preset text under Firefox (the last), avant browser 10.0                             Re: Preset text Dont work more!, posted by Alex H on Thu Mar 31 10:33:10 2005  > > Yes I have upgraded Elog to 2.5.8-2. > > I submit my new elogd.cfg file maybe it will help you. > > I have try the preset text under Firefox (the last), avant browser 10.0    Logfiles, posted by becher on Tue Mar 29 23:03:35 2005  Is there an option that elog creates one logfile for one entry in the database? It seems that there elog is creating one logfile for one day.       Re: Logfiles, posted by Stefan Ritt on Tue Mar 29 23:05:56 2005  > Is there an option that elog creates one logfile for one entry in the > database? It seems that there elog is creating one logfile for one day.          Re: Logfiles, posted by Becher on Wed Mar 30 16:05:34 2005  I want exchange the logs as files and not with the mirroring function. My  collegue and me are already exchanging all our project files, so the logs from  ELOG could be included in this exchange.             Re: Logfiles, posted by Stefan Ritt on Wed Mar 30 16:31:36 2005  > I want exchange the logs as files and not with the mirroring function. My  > collegue and me are already exchanging all our project files, so the logs from  > ELOG could be included in this exchange.   Expand all at elog home, posted by Alex H on Wed Mar 16 16:13:15 2005  Hi, Is there a command line in the configuration files to show all of sub logs        Re: Expand all at elog home, posted by Alex H on Fri Mar 25 12:49:13 2005  > Hi, >  > Is there a command line in the configuration files to show all of sub           Re: Expand all at elog home, posted by Stefan Ritt on Tue Mar 29 09:57:29 2005  > So I have posted a picture to explain better my question. > So could it be possible to have the index page always expanded ? > thanks for answers.             Re: Expand all at elog home, posted by Alex H on Wed Mar 30 15:12:54 2005  > > So I have posted a picture to explain better my question. > > So could it be possible to have the index page always expanded ? > > thanks for answers.   Unable to enter/edit time in user defined $date field?, posted by mark james on Tue Mar 22 12:03:04 2005  I have defined a new field called "Record Date" to accept the dates from a previous logging system. I am not too concerned with the timestamp associated with these old imported entries. But for new entries...       Re: Unable to enter/edit time in user defined $date field?, posted by Stefan Ritt on Tue Mar 22 13:46:57 2005  > I have defined a new field called "Record Date" to accept the dates from a > previous logging system. I am not too concerned with the timestamp > associated with these old imported entries. But for new entries...          Re: Unable to enter/edit time in user defined $date field?, posted by mark james on Tue Mar 22 23:27:21 2005  Stefan, Oh. OK. I will keep tuned. It would be quite useful to have.       Re: Unable to enter/edit time in user defined $date field?, posted by Stefan Ritt on Wed Mar 30 11:07:08 2005  I implemented a "datetime" option which does exactly what you want. All you need is a   wrong handling of attachment names, posted by Emiliano Gabrielli on Wed Mar 23 11:29:51 2005  When an attached image name contains a space in its filename and attachment display is enabled elog builds a wrong url to the image:       Re: wrong handling of attachment names, posted by Emiliano Gabrielli on Wed Mar 23 12:54:51 2005  > When an attached image name contains a space in its filename and attachment > display is enabled elog builds a wrong url to the image: >        Re: wrong handling of attachment names, posted by Stefan Ritt on Wed Mar 23 20:35:55 2005  > When an attached image name contains a space in its filename and attachment > display is enabled elog builds a wrong url to the image: >           Re: wrong handling of attachment names, posted by Emiliano Gabrielli on Thu Mar 24 10:51:10 2005  > > When an attached image name contains a space in its filename and attachment > > display is enabled elog builds a wrong url to the image: > >              Re: wrong handling of attachment names, posted by Stefan Ritt on Fri Mar 25 00:33:51 2005  > It seems that uploading files with spaces in the name *now* works well... so the > problem should be somewhere in the handling of existing attachments, not rised when > the attachment is uploaded with the current version of elog ... it's quite strange       Re: wrong handling of attachment names, posted by Emiliano Gabrielli on Thu Mar 24 13:40:27 2005  > When an attached image name contains a space in its filename and attachment > display is enabled elog builds a wrong url to the image: >           Re: wrong handling of attachment names, posted by Stefan Ritt on Fri Mar 25 00:30:57 2005  > - Irestarted the daemon > - attached strace to it > - requested the list for a testin logbook, few entries some quite big images              Re: wrong handling of attachment names, posted by Emiliano Gabrielli on Tue Mar 29 11:49:29 2005  > > - Irestarted the daemon > > - attached strace to it > > - requested the list for a testin logbook, few entries some quite big images              Re: wrong handling of attachment names, posted by Emiliano Gabrielli on Tue Mar 29 16:21:32 2005  > > - Irestarted the daemon > > - attached strace to it > > - requested the list for a testin logbook, few entries some quite big images    Crash with Protect Selection page = 1, posted by Stephen A. Wood on Thu Mar 24 10:31:01 2005  Using 2.5.8, if I set "Protect Selection page" to 1, then elogd seg faults as soon as it is accessed.       Re: Crash with Protect Selection page = 1, posted by Stefan Ritt on Thu Mar 24 10:39:00 2005  > Using 2.5.8, if I set "Protect Selection page" to 1, then elogd seg faults > as soon as it is accessed.          Re: Crash with Protect Selection page = 1, posted by Emiliano Gabrielli on Thu Mar 24 11:00:59 2005  > > Using 2.5.8, if I set "Protect Selection page" to 1, then elogd seg faults > > as soon as it is accessed. >           Re: Crash with Protect Selection page = 1, posted by Emiliano Gabrielli on Thu Mar 24 11:01:06 2005  > > Using 2.5.8, if I set "Protect Selection page" to 1, then elogd seg faults > > as soon as it is accessed. >           Re: Crash with Protect Selection page = 1, posted by Stephen A. Wood on Thu Mar 24 11:28:13 2005  > > Using 2.5.8, if I set "Protect Selection page" to 1, then elogd seg faults > > as soon as it is accessed. >              Re: Crash with Protect Selection page = 1, posted by Stefan Ritt on Thu Mar 24 11:47:58 2005  > Logins work OK if the username/password is valid.  However, if I try to login > with invalid authentication, the server crashes.  If I turn off the protect > selection page, then invalid authentication does not crash elogd.                Re: Crash with Protect Selection page = 1, posted by Stephen A. Wood on Thu Mar 24 12:09:55 2005  > > Logins work OK if the username/password is valid.  However, if I try to login > > with invalid authentication, the server crashes.  If I turn off the protect > > selection page, then invalid authentication does not crash elogd.                   Re: Crash with Protect Selection page = 1, posted by Alex H on Fri Mar 25 12:44:49 2005  > > > Logins work OK if the username/password is valid.  However, if I try to login > > > with invalid authentication, the server crashes.  If I turn off the protect > > > selection page, then invalid authentication does not crash elogd.                      Re: Crash with Protect Selection page = 1, posted by Stefan Ritt on Fri Mar 25 18:25:59 2005  > > > > Logins work OK if the username/password is valid.  However, if I try to login > > > > with invalid authentication, the server crashes.  If I turn off the protect > > > > selection page, then invalid authentication does not crash elogd.   Database type logbook entry creation, posted by David Egolf on Thu Mar 24 20:36:50 2005  I would like to create a paper waste logbook. I need to have a column that  shows a weight in pounds and another column with a calculation from those  pounds to dollars.  pounds x $4.00 = cost  I was wondering if this was        Re: Database type logbook entry creation, posted by Stefan Ritt on Thu Mar 24 21:17:28 2005  > I would like to create a paper waste logbook. I need to have a column that  > shows a weight in pounds and another column with a calculation from those  > pounds to dollars.  pounds x $4.00 = cost  I was wondering if this was    HTML 4.1 transitional validation fails, posted by Emiliano Gabrielli on Mon Feb 7 18:55:02 2005  as this url shows http://www.htmlhelp.com/tools/validator/problems.html#amp it should be used an HTML entity instead of the ampersand sign.       Re: HTML 4.1 transitional validation fails, posted by Stefan Ritt on Mon Feb 7 20:13:28 2005  > as this url shows http://www.htmlhelp.com/tools/validator/problems.html#amp <br> > it should be used an HTML entity instead of the ampersand sign.<p>          Re: HTML 4.1 transitional validation fails, posted by Emiliano Gabrielli on Thu Feb 24 11:23:44 2005  > > as this url shows http://www.htmlhelp.com/tools/validator/problems.html#amp > <br> > > it should be used an HTML entity instead of the ampersand sign.<p>             Re: HTML 4.1 transitional validation fails, posted by Emiliano Gabrielli on Thu Feb 24 12:44:29 2005  > > > as this url shows http://www.htmlhelp.com/tools/validator/problems.html#amp > > <br> > > > it should be used an HTML entity instead of the ampersand sign.<p>             Re: HTML 4.1 transitional validation fails, posted by Emiliano Gabrielli on Thu Feb 24 12:45:02 2005  > > > as this url shows http://www.htmlhelp.com/tools/validator/problems.html#amp > > <br> > > > it should be used an HTML entity instead of the ampersand sign.<p>                Re: HTML 4.1 transitional validation fails, posted by Stefan Ritt on Wed Mar 2 17:31:33 2005  > > I tried to substitute avery occurrence of hard coded "&" with "&" but it does > > not do the job at all ... infact the first time the HTML code is ok, but > > following a link let the browser to automatically decode html entities .. and       Re: HTML 4.1 transitional validation fails, posted by Emiliano Gabrielli on Tue Feb 8 13:11:30 2005  > as this url shows http://www.htmlhelp.com/tools/validator/problems.html#amp <br> > it should be used an HTML entity instead of the ampersand sign.<p>          Re: HTML 4.1 transitional validation fails, posted by Stefan Ritt on Sat Feb 12 17:40:55 2005  I added ths missing tags. The validator at least does not complain any more.       Re: HTML 4.1 transitional validation fails, posted by Emiliano Gabrielli on Thu Mar 24 13:21:28 2005  > as this url shows http://www.htmlhelp.com/tools/validator/problems.html#amp > it should be used an HTML entity instead of the ampersand sign. Stefan, the validation still fails on the ampersand ... here is an example of your online Demo elog: http://validator.w3.org/check?verbose=1&uri=http%3A//midas.psi.ch/elogs/Forum/920          Re: HTML 4.1 transitional validation fails, posted by Stefan Ritt on Thu Mar 24 13:59:06 2005  > Stefan, the validation still fails on the ampersand ... > here is an example of your online Demo elog: > http://validator.w3.org/check?verbose=1&uri=http%3A//midas.psi.ch/elogs/Forum/920   New Debian package (2.5.8+r1592) -- needs testing, posted by Recai Oktas on Wed Mar 23 05:56:35 2005  Hi to all, I've prepared a new Debian package.  This version will probably be the one       Re: New Debian package (2.5.8+r1592) -- needs testing, posted by Emiliano Gabrielli on Wed Mar 23 11:19:51 2005  > Hi to all, >  > I've prepared a new Debian package.  This version will probably be the one          Re: New Debian package (2.5.8+r1592) -- needs testing, posted by Recai Oktas on Wed Mar 23 16:44:32 2005  > It seems to work nice to me. > Just another suggestion: I think it would be better to insert a commented out > example for all allowed parameters in the distributed  /etc/default/elog             Re: New Debian package (2.5.8+r1592) -- needs testing, posted by Emiliano Gabrielli on Thu Mar 24 12:26:46 2005  > > It seems to work nice to me. > > Just another suggestion: I think it would be better to insert a commented out > > example for all allowed parameters in the distributed  /etc/default/elog       Re: New Debian package (2.5.8+r1592) -- needs testing, posted by Emiliano Gabrielli on Thu Mar 24 12:30:07 2005  > Hi to all, >  > I've prepared a new Debian package.  This version will probably be the one   MOptions - How do I space them out, posted by mark james on Tue Mar 22 12:58:30 2005  I would like to increase the spacing between 'MOptions' choices. I have created a new theme and have been playing with the CSS stylesheet. But can't find how to increase this spacing. Having lots of fun otherwise!       Re: MOptions - How do I space them out, posted by Stefan Ritt on Tue Mar 22 13:29:44 2005  > I would like to increase the spacing between 'MOptions' choices. I have > created a new theme and have been playing with the CSS stylesheet. But can't > find how to increase this spacing. Having lots of fun otherwise!   Asing a user to an log, posted by Rob de Bruin on Fri Mar 18 11:14:58 2005  Hello, I'm looking for an option to attach a user to a log?       Re: Asing a user to an log, posted by Stefan Ritt on Fri Mar 18 13:36:19 2005  > I'm looking for an option to attach a user to a log? >  > For example:   Non clickable column, posted by Alex H on Fri Mar 4 10:16:04 2005  Hi, Is there any solution to obtain an non-clickable column ?       Re: Non clickable column, posted by Stefan Ritt on Fri Mar 4 10:50:57 2005  > Is there any solution to obtain an non-clickable column ? > For example here : http://midas.psi.ch/elogs/Config+Examples/ what should  > I do to obtain the data of the Category column non clickable?          Re: Non clickable column, posted by Alex H on Fri Mar 4 10:59:51 2005  > > Is there any solution to obtain an non-clickable column ? > > For example here : http://midas.psi.ch/elogs/Config+Examples/ what should  > > I do to obtain the data of the Category column non clickable?             Re: Non clickable column, posted by Stefan Ritt on Mon Mar 14 21:56:15 2005  > I talk about the column contents. In fact on ELOG, we store password so its  > more easyer to click twice on it to select them and after to copy them instead  > of select from right to left the password and to try to copy them. The HMTL                 Re: Non clickable column, posted by Alex H on Tue Mar 15 14:11:48 2005  > > I talk about the column contents. In fact on ELOG, we store password so its  > > more easyer to click twice on it to select them and after to copy them instead  > > of select from right to left the password and to try to copy them. The HMTL    Display <attribute> do erroneously encoded, posted by Emiliano Gabrielli on Mon Mar 7 16:05:22 2005  Display subject = <b>$subject</b>       Re: Display <attribute> do erroneously encoded, posted by Stefan Ritt on Mon Mar 14 21:11:11 2005  >  > Display subject = <b>$subject</b> >    2 Extendable options when created new entries, posted by Alex H on Thu Mar 3 16:46:26 2005  Hello, I try to have two Extendable options : Client and Equipment       Re: 2 Extendable options when created new entries, posted by Stefan Ritt on Mon Mar 14 21:00:57 2005  I fixed this problem in revision 1.586. It will be contained in the next release.   Trying to get "Format <attribute>" to work, posted by T. Ribbrock on Wed Mar 9 10:17:51 2005  I am currently trying to get some attributes into one line in my logbook, with some others on a line of their own (this is on the single message page) - pretty much like in this forum. I searched through the forum and the config examples and found elog:571 as well as elog:Config+Examples/4,   length of fields, posted by Paul Harrington on Wed Feb 23 13:02:59 2005  When creating/updating entries in elog, excluding the main text field are  there any limits on the size of the other fields?       Re: length of fields, posted by Stefan Ritt on Wed Mar 2 15:00:04 2005  > When creating/updating entries in elog, excluding the main text field are  > there any limits on the size of the other fields?          Re: length of fields, posted by Paul Harrington on Thu Mar 3 10:21:21 2005  > > When creating/updating entries in elog, excluding the main text field are  > > there any limits on the size of the other fields? >              Re: length of fields, posted by Paul Harrington on Tue Mar 8 13:16:14 2005  The reason for the earlier question is that we are trying to use Elog to store  data in a form we'd need to store more 1500 characters in more than one field.                Re: length of fields, posted by Stefan Ritt on Tue Mar 8 20:28:49 2005  > Is it possible to get around this problem by having more then one main text field  > per record?   Compilation flag/file question, posted by Benjamin Brown on Tue Mar 8 17:31:55 2005  If I want to go to the latest CVS release, what files do I have to compile along with the elogd.c file?  Also, do I need to use any special gcc flags for the compilation?  Thanks.       Re: Compilation flag/file question, posted by Stefan Ritt on Tue Mar 8 17:34:05 2005  > If I want to go to the latest CVS release, what files do I have to compile > along with the elogd.c file?  Also, do I need to use any special gcc flags > for the compilation?  Thanks.          Re: Compilation flag/file question, posted by Benjamin Brown on Tue Mar 8 19:23:14 2005  > > If I want to go to the latest CVS release, what files do I have to compile > > along with the elogd.c file?  Also, do I need to use any special gcc flags > > for the compilation?  Thanks.   boundary problem with Type lists display, posted by Emiliano Gabrielli on Wed Feb 23 18:07:24 2005  using: Display mode = threaded List display = Subject, Type, Author, Date       Re: boundary problem with Type lists display, posted by Stefan Ritt on Wed Mar 2 15:19:56 2005  > using: > Display mode = threaded > List display = Subject, Type, Author, Date   Including the text in the CSV export, posted by Gary Mercier on Mon Feb 28 21:35:57 2005  Is there any way to include the text of a log message in the CSV export?  Anyway to include a pointer to the attachment?       Re: Including the text in the CSV export, posted by Stefan Ritt on Tue Mar 1 13:39:09 2005  > Is there any way to include the text of a log message in the CSV export?  > Anyway to include a pointer to the attachment?          Re: Including the text in the CSV export, posted by Gary Mercier on Tue Mar 1 17:29:47 2005  > > Is there any way to include the text of a log message in the CSV export?  > > Anyway to include a pointer to the attachment? >    Is any one using elog on Solaris 9?, posted by Robert Keeney on Thu Apr 1 18:22:37 2004  I searched and found some problems people were having compiling it on Solaris. However I didn't see anything else.       Re: Is any one using elog on Solaris 9?, posted by Jaap van Vliet on Thu Feb 24 11:23:03 2005  I've got it running for two years now on a Sun Netra box running Solaris 9 > I searched and found some problems people were having compiling it on Solaris.   Space in logbook name with password list results in "List" menu acting strange, posted by Neil Swartz on Tue Feb 22 01:24:41 2005  If you have a space in a logbook name and you enable password list, then  the "List" menu option forces you to the login page each time. The URL says "aaa+bbb", but when you do not have passwords enabled, the        Re: Space in logbook name with password list results in "List" menu acting strange, posted by Stefan Ritt on Tue Feb 22 10:35:17 2005  > If you have a space in a logbook name and you enable password list, then  > the "List" menu option forces you to the login page each time. > The URL says "aaa+bbb", but when you do not have passwords enabled, the    Problem with 'Show Attributes' option, posted by Heiko Scheit on Sat Feb 19 18:39:52 2005  There is a problem with the 'Show Attributes' option causing the 'Format ...' options to be ignored.       Re: Problem with 'Show Attributes' option, posted by Stefan Ritt on Sun Feb 20 15:30:04 2005  > There is a problem with the 'Show Attributes' option > causing the 'Format ...' options to be ignored. >    How to import previous emails to elog ?, posted by Anand Sengupta on Fri Feb 18 08:43:42 2005  Hi       Re: How to import previous emails to elog ?, posted by Stefan Ritt on Fri Feb 18 08:47:20 2005  Have a look at http://midas.psi.ch/elogs/Contributions/10   images attached shown as inline , posted by Emiliano Gabrielli on Mon Feb 7 13:14:41 2005  I'm configuring this great application in order to replace the previous elogbook my community is using (in the accelerator's world).       Re: images attached shown as inline , posted by Stefan Ritt on Mon Feb 7 13:34:17 2005  > One of the main and mandatory feature they cannot renunce is the possibility > of displaying every attached image just inline, without having to click over > the file name or to enter the entry view (in which the attachment can          Re: images attached shown as inline , posted by Emiliano Gabrielli on Mon Feb 7 14:06:48 2005  > > One of the main and mandatory feature they cannot renunce is the possibility > > of displaying every attached image just inline, without having to click over > > the file name or to enter the entry view (in which the attachment can             Re: images attached shown as inline , posted by Stefan Ritt on Mon Feb 7 14:23:37 2005  > yes I know, but it could be a "placebo" :-P .. we are using the elog in a lan so it > could be a good temporary solution ... >                 Re: images attached shown as inline , posted by Emiliano Gabrielli on Mon Feb 7 15:59:04 2005  > > yes I know, but it could be a "placebo" :-P .. we are using the elog in a lan so it > > could be a good temporary solution ... > >                    Re: images attached shown as inline , posted by Stefan Ritt on Mon Feb 7 21:07:58 2005  > uhm ok .. can I expect to get a release with this feature in the near future ? I checked how I would do that and did not find a good solution. If I put a                      Re: images attached shown as inline , posted by Emiliano Gabrielli on Tue Feb 8 12:39:53 2005  > > uhm ok .. can I expect to get a release with this feature in the near future ? >  > I checked how I would do that and did not find a good solution. If I put a                         Re: images attached shown as inline , posted by Stefan Ritt on Sat Feb 12 17:08:32 2005  > the following should do the job: >  > <div style="width: 200px">                            Re: images attached shown as inline , posted by Emiliano Gabrielli on Wed Feb 16 08:58:47 2005  > > the following should do the job:  > >   > > <div style="width: 200px">                                Re: images attached shown as inline , posted by Stefan Ritt on Wed Feb 16 09:02:09 2005  As I wrote you by mail, I implemented your idea in the following way. As you say, it's only working on Gecko based systems. I did not implement additional configuration parameters, but made it through the CSS file:                      [patch] Re: images attached shown as inline , posted by Emiliano Gabrielli on Tue Feb 8 19:04:25 2005  > > uhm ok .. can I expect to get a release with this feature in the near future ? >  > I checked how I would do that and did not find a good solution. If I put a                         [patch] Re: images attached shown as inline , posted by Stefan Ritt on Sat Feb 12 17:48:51 2005  Are you sure that this does not stretch small images? Please see elog:931 > two new elog.conf parameters are defined:   [patch]: fixed wrong extention check, posted by Emiliano Gabrielli on Tue Feb 8 17:40:54 2005  current version uses strstr() to check if the file has the expected ascii text extension ... this is buggy becouse this way a file named       Re: [patch]: fixed wrong extention check, posted by Stefan Ritt on Sat Feb 12 17:45:39 2005  > current version uses strstr() to check if the file has the expected ascii > text extension ... this is buggy becouse this way a file named > ".txt_hidden_file" or "foo.config.dat" are both seen as .txt files.          Re: [patch]: fixed wrong extention check, posted by Emiliano Gabrielli on Wed Feb 16 08:48:52 2005  > > current version uses strstr() to check if the file has the expected ascii  > > text extension ... this is buggy becouse this way a file named  > > ".txt_hidden_file" or "foo.config.dat" are both seen as .txt files.    preselected values and conditional options, posted by Emiliano Gabrielli on Mon Feb 7 13:28:18 2005  here is a piece of my current config: ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;       Re: preselected values and conditional options, posted by Emiliano Gabrielli on Tue Feb 8 13:13:22 2005   up :-)       Re: preselected values and conditional options, posted by Stefan Ritt on Sat Feb 12 17:06:44 2005  > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; > Attributes = Author, Type, Category, Subject > Required Attributes = Author, Type, Subject          Re: preselected values and conditional options, posted by Emiliano Gabrielli on Wed Feb 16 08:45:54 2005  > > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;  > > Attributes = Author, Type, Category, Subject  > > Required Attributes = Author, Type, Subject    Configuration problems, posted by Erich Beyrent on Mon Feb 14 17:10:00 2005  I am trying to run eLog under Apache 2 on my FreeBSD 5.3 server.  I started the daemon with "elogd -n <my hostname> -p 8080" and when I connect to my server on that port, I get a 500 server configuration error.  The Apache log       Re: Configuration problems, posted by Stefan Ritt on Mon Feb 14 19:03:31 2005  > I am trying to run eLog under Apache 2 on my FreeBSD 5.3 server.  I started > the daemon with "elogd -n <my hostname> -p 8080" and when I connect to my > server on that port, I get a 500 server configuration error.  The Apache log          Re: Configuration problems, posted by Erich Beyrent on Mon Feb 14 20:39:30 2005  > > I am trying to run eLog under Apache 2 on my FreeBSD 5.3 server.  I started > > the daemon with "elogd -n <my hostname> -p 8080" and when I connect to my > > server on that port, I get a 500 server configuration error.  The Apache log             Re: Configuration problems, posted by Stefan Ritt on Mon Feb 14 20:43:48 2005  > No luck.  I have the proxy definition in my httpd.conf file.  I have the URL parameter > in my elogd.cfg file.   ELOG security vulnerability fixed, IMPORTANT!!!!, posted by Stefan Ritt on Mon Feb 14 12:36:30 2005  Dear ELOG users, It has been brought to my attention that ELOG has a vulnerability through       Re: ELOG security vulnerability fixed, IMPORTANT!!!!, posted by Recai Oktas on Mon Feb 14 18:49:44 2005  Attention to Debian users; I've prepared the fixed package and also contacted to Debian Security Team for   ELOG Command Line Utility, posted by Tim Fowler on Wed Feb 9 15:40:12 2005  I am trying to use the command line utility elog. Some of the attributes  that I have setup are multiple options. When I run the command line  utility to create a new message, any attribute that is setup with multiple        Re: ELOG Command Line Utility, posted by Stefan Ritt on Sun Feb 13 17:21:19 2005  > I am trying to use the command line utility elog. Some of the attributes  > that I have setup are multiple options. When I run the command line  > utility to create a new message, any attribute that is setup with multiple    Help with configuration newbie, posted by Anand Sengupta on Fri Feb 11 15:44:38 2005  Hi,       Re: Help with configuration newbie, posted by Stefan Ritt on Sat Feb 12 20:11:48 2005  > 1. When replying to another reply in a thread, the author_name attribute is > not substitued (as desired). Since this is a mandatory field, we are not > able to send the reply message. However, reply to the originial message          Re: Help with configuration newbie, posted by Anand Sengupta on Sat Feb 12 20:51:43 2005  > > 1. When replying to another reply in a thread, the author_name attribute is > > not substitued (as desired). Since this is a mandatory field, we are not > > able to send the reply message. However, reply to the originial message             Re: Help with configuration newbie, posted by Stefan Ritt on Sun Feb 13 16:43:05 2005  > For me, when I put the Category in the fixed attributes for reply, I see the > Category but when I actually try to send the message - it says Category not > entered. I am sure I am doing something very stupid. Please help.   erroneus encoding, posted by Emiliano Gabrielli on Tue Feb 8 13:00:40 2005  elog sends wrong HTTP headers, charset is empty and not separed from the next one "Connection: Keep-Alive ... this bug tells the browser that the encoding is "connection:" ... that is wrong.       Re: erroneus encoding, posted by Emiliano Gabrielli on Tue Feb 8 15:41:55 2005  the following patch corrects the problem, plz apply :       Re: erroneus encoding, posted by Stefan Ritt on Sat Feb 12 17:31:46 2005  > elog sends wrong HTTP headers, charset is empty and not separed from the > next one "Connection: Keep-Alive ... this bug tells the browser that the > encoding is "connection:" ... that is wrong.   Page not found after login or create useraccount, posted by Rob de Bruin on Tue Feb 8 10:38:39 2005  best all, I'm having trouble with redirecting after creating an account or login.       Re: Page not found after login or create useraccount, posted by Rob de Bruin on Tue Feb 8 11:04:18 2005  As you can see the password is also visable in the addressbar??          Re: Page not found after login or create useraccount, posted by Rob de Bruin on Tue Feb 8 14:49:40 2005  Sorry people, I did not use de - n host/ip syntax at the startup of elogd.          Re: Page not found after login or create useraccount, posted by Rob de Bruin on Tue Feb 8 14:55:26 2005  Sorry people, I did not use de - n host/ip syntax at the startup of elogd.   repository of elog configuration files, posted by Anand Sengupta on Mon Feb 7 09:58:25 2005  Hi        Re: repository of elog configuration files, posted by Stefan Ritt on Mon Feb 7 10:00:42 2005  > Is there a repository of elog configuration files for newbies to lookup and > learn ? I have seen the 'contributions' elog - useful as it is ... it is not > much. I would appreciate if someone can point out such a site where people   $user_email variable causes problems in Use Email From setting, posted by John Habermann on Sun Feb 6 04:12:52 2005  I am running into problems when I try and use the Use Email From = $user_email        Re: $user_email variable causes problems in Use Email From setting, posted by Stefan Ritt on Sun Feb 6 12:44:03 2005  > header. I saw that elog:333 reported a similar problem but this was listed > as fixed.   Conditional attributes does not work in French, posted by Laurent S. Nadolski on Wed Feb 2 10:37:48 2005  Hi, I am very much interested in using elog as a shift logbook for SOLEIL       Re: Conditional attributes does not work in French, posted by Stefan Ritt on Thu Feb 3 16:48:41 2005  > I am very much interested in using elog as a shift logbook for SOLEIL > accelerators.   Finding Last Changed Entries, posted by Bee on Tue Feb 1 14:41:08 2005  Is there an inbuilt way to find the last entries changed in an elog? I could add a "Last Mod" attribute and then config "Subst on edit Last Mod =       Re: Finding Last Changed Entries, posted by Stefan Ritt on Tue Feb 1 14:44:00 2005  > Is there an inbuilt way to find the last entries changed in an elog? >  > I could add a "Last Mod" attribute and then config "Subst on edit Last Mod =   Automatic Export, posted by Tim Fowler on Thu Jan 27 19:09:55 2005  Is there any way to automatically export the logbook(s)?        Re: Automatic Export, posted by Stefan Ritt on Fri Jan 28 08:33:49 2005  > Is there any way to automatically export the logbook(s)?  Kind of. You can use "wget" under Linux (use cygwin under Windows to get wget          Re: Automatic Export, posted by Tim Fowler on Fri Jan 28 18:04:03 2005  > > Is there any way to automatically export the logbook(s)?  >  > Kind of. You can use "wget" under Linux (use cygwin under Windows to get wget   mirroring specific logbooks, posted by John Habermann on Sun Jan 23 02:51:58 2005  Hi I was just wondering if it is possible to define what logbooks you want       Re: mirroring specific logbooks, posted by Stefan Ritt on Tue Jan 25 21:48:52 2005  > I was just wondering if it is possible to define what logbooks you want > mirrored in the [Global] part of the elogd.conf file.          Re: mirroring specific logbooks, posted by John Habermann on Wed Jan 26 07:40:46 2005  > > I was just wondering if it is possible to define what logbooks you want > > mirrored in the [Global] part of the elogd.conf file. >    Find using multiple values with MOptions, posted by Neil Swartz on Sat Jan 8 16:40:04 2005  I have a logbook with an attribute that has a number of fixed values. I  use MOptions to prevent typos when entering and allow multiple "keywords". When searching the users can only search on one keyword.       Re: Find using multiple values with MOptions, posted by Stefan Ritt on Mon Jan 17 16:51:35 2005  > I have a logbook with an attribute that has a number of fixed values. I  > use MOptions to prevent typos when entering and allow multiple "keywords". > When searching the users can only search on one keyword.          Re: Find using multiple values with MOptions, posted by Neil Swartz on Tue Jan 18 03:37:40 2005  > > I have a logbook with an attribute that has a number of fixed values. I  > > use MOptions to prevent typos when entering and allow multiple "keywords". > > When searching the users can only search on one keyword.             Re: Find using multiple values with MOptions, posted by Stefan Ritt on Tue Jan 18 13:06:48 2005  > Currently there is a dropdown when searching for MOption fields. Maybe you could  > allow multiple selections in the dropdown. This to me is an "OR" search.                Re: Find using multiple values with MOptions, posted by Neil Swartz on Wed Jan 19 04:33:00 2005  > > Currently there is a dropdown when searching for MOption fields. Maybe you could  > > allow multiple selections in the dropdown. This to me is an "OR" search. >                    Re: Find using multiple values with MOptions, posted by Stefan Ritt on Fri Jan 21 23:30:35 2005  <SELECT NAME="lid" multiple size="5"> Oh, nice, I didn't know of that. However, I prefer to have multiple options to be selected   increasing the height of the attribute display field, posted by John Habermann on Thu Jan 20 16:32:25 2005  Was wondering  if it was possible to increase the height that the text box for an attribute is displayed as. I would like to construct a form for a weekly report which consist of a couple of text area attributes. I have       Re: increasing the height of the attribute display field, posted by Stefan Ritt on Thu Jan 20 17:40:33 2005  > Was wondering  if it was possible to increase the height that the text box > for an attribute is displayed as.          Re: increasing the height of the attribute display field, posted by John Habermann on Thu Jan 20 23:59:19 2005  Sorry I didn't see the wishlist but I see what you mean. I have just found out that pasting content that contains more than 1 line into an attribute field crashes elog.               Re: increasing the height of the attribute display field, posted by Stefan Ritt on Fri Jan 21 10:43:21 2005  > I have a play with the Preset text setting and see what I can come up with. By the > way there is a spelling mistake in the config.html page. In the Conditional > Attributes section you use the Preset text setting as an example but have spelt it   Login/Password request appears twice, posted by PJ Meyer on Mon Dec 6 20:05:58 2004  Have set up 3 top level groups, each with their own password file. Ever since users have to 'login' twice to get to the appropriate elog. You click on top level group, get to log book and click on the one you want        Re: Login/Password request appears twice, posted by Stefan Ritt on Wed Jan 5 16:04:53 2005  > Have set up 3 top level groups, each with their own password file. > Ever since users have to 'login' twice to get to the appropriate elog. > You click on top level group, get to log book and click on the one you want           Re: Login/Password request appears twice, posted by PJ Meyer on Wed Jan 12 23:48:18 2005  > > Have set up 3 top level groups, each with their own password file. > > Ever since users have to 'login' twice to get to the appropriate elog. > > You click on top level group, get to log book and click on the one you              Re: Login/Password request appears twice, posted by Stefan Ritt on Mon Jan 17 21:29:32 2005  > OK elogd.cfg is attached. I tried to reproduce your problem, but without success. I only have to login once.    MOptions and Extendable, posted by Neil Swartz on Sat Jan 8 17:31:07 2005  If an attribute uses MOptions and is also extendable, clicking "Add  <attribute name>" and entering a value adds the value to the MOptions, but  does not put the value into the log entry. The log record has that        Re: MOptions and Extendable, posted by Stefan Ritt on Mon Jan 17 16:44:28 2005  > If an attribute uses MOptions and is also extendable, clicking "Add  > <attribute name>" and entering a value adds the value to the MOptions, but  > does not put the value into the log entry. The log record has that    Menu command = doesn't list, posted by PJ Meyer on Wed Jan 12 23:53:27 2005  Have tried to use "Menu commands =" to list menu commands available as per: "Menu commands = List, Back, New, Edit, Delete, Find, Config, HELP, Logout"       Re: Menu command = doesn't list, posted by Stefan Ritt on Mon Jan 17 15:22:30 2005  > Have tried to use "Menu commands =" to list menu commands available as per: > "Menu commands = List, Back, New, Edit, Delete, Find, Config, HELP, Logout" >    How do I Export the 'Date' and 'Text' fields., posted by Rashid Ali on Mon Jan 17 01:13:27 2005  I can export the Attributes I define easily and the Subject. Can't seem to  export the Entry Date and the Text fields.       Re: How do I Export the 'Date' and 'Text' fields., posted by Stefan Ritt on Mon Jan 17 09:29:42 2005  > I can export the Attributes I define easily and the Subject. Can't seem to  > export the Entry Date and the Text fields.       Re: How do I Export the 'Date' and 'Text' fields., posted by Stefan Ritt on Mon Jan 17 15:02:20 2005  > I can export the Attributes I define easily and the Subject. Can't seem to  > export the Entry Date and the Text fields.   Extendable options for conditional attributes, posted by David Kappel on Mon Dec 13 19:46:46 2004  Hi, right now I'm testing Elog to use it as a task/todo-log for our small        Re: Extendable options for conditional attributes, posted by Stefan Ritt on Thu Jan 6 10:08:54 2005  > Playing with all the configuration possibilities I have one issue: > I like to use the "Extendable options" but I can't combine them with  > the "Conditional attributes".          Re: Extendable options for conditional attributes, posted by David Kappel on Fri Jan 7 17:15:14 2005  > > Playing with all the configuration possibilities I have one issue: > > I like to use the "Extendable options" but I can't combine them with  > > the "Conditional attributes".             Re: Extendable options for conditional attributes, posted by David Kappel on Mon Jan 10 20:42:31 2005  > > > Playing with all the configuration possibilities I have one issue: > > > I like to use the "Extendable options" but I can't combine them with  > > > the "Conditional attributes".   Implementation of RSS feeds, posted by Stefan Ritt on Mon Oct 25 23:16:39 2004  I implemented experimentally RSS feeds into Elog. Before releasing this new addition, I would like to collect some experience with it. This forum now supports RSS feeds, for which you can subscribe with a RSS feed reader like       Re: Announcement of RSS feeds, posted by Marc Neiger on Thu Nov 11 01:04:01 2004  Great, but what's the corresponding URL for the RSS feed itself > I implemented experimentally RSS feeds into Elog. Before releasing this new       , posted by on Mon Nov 15 01:02:29 2004  I didn't see the RSS button in Firefox, however the URL:   http://midas.psi.ch/elogs/Forum/elog.rdf       Re: Announcement of RSS feeds, posted by Marc Neiger on Mon Nov 15 09:54:45 2004  IE 6 chokes on the XML, below is what I get for  http://midas.psi.ch/elogs/Forum/elog.rdf (sorry this is in french).       Re: Implementation of RSS feeds, posted by Matthew on Tue Jan 4 00:55:26 2005  The <pubDate> item doesn't appear to be a valid RFC-822 date.  Causes some aggregators to fail when parsing.          Re: Implementation of RSS feeds, posted by Stefan Ritt on Tue Jan 4 11:38:43 2005  > The <pubDate> item doesn't appear to be a valid RFC-822 date.  Causes some > aggregators to fail when parsing.   Complete Bulgarian translation, posted by Ognyan Kulev on Wed Dec 22 12:28:22 2004  Thanks to Recai Oktas, who encourage me to complete the Bulgarian translation for the Debian elog package, the Bulgarian translation is completed and attached.       Re: Complete Bulgarian translation, posted by Stefan Ritt on Wed Dec 22 12:56:44 2004  Thanks, the file will be contained in the next release.   admin menu, posted by Heiko Scheit on Sun Dec 19 17:11:07 2004  Could you implemet and option 'admin menu' which gets displayed when an 'admin' is logged in.  This menu could e.g. also include 'Delete' while the normal menu would not.       Re: admin menu, posted by Stefan Ritt on Mon Dec 20 17:22:28 2004  > Could you implemet and option 'admin menu' which gets displayed > when an 'admin' is logged in.  This menu could e.g. also include 'Delete' > while the normal menu would not.   Redirect to wrong hostname, posted by Neil Swartz on Sun Dec 12 17:46:39 2004  I have a computer that has a different idea of its name from the DNS  server. When I run ELOG and someone clicks "Search" I get a page not found. I tried starting with "-n <hostname>", but elog still uses gethostname.       Re: Redirect to wrong hostname, posted by Stefan Ritt on Fri Dec 17 23:20:02 2004  > I think you should be using tcp_hostname instead of gethostname if it is  > specified.          Re: Redirect to wrong hostname, posted by Ulrich Trüssel on Sun Dec 19 19:00:06 2004  know that illness...  :-(  but was the last of the family of 4 people i'd like to ask for an other usefull change togehter with this and how url's are              Re: Redirect to wrong hostname, posted by Stefan Ritt on Mon Dec 20 17:18:16 2004  Ok, I changed that in version 2.5.5-3. Note that one can also use the "elog:..." substitution, like   form posting , posted by Qiang on Thu Dec 9 19:22:12 2004  hello,  i need to use a perl script with LWP to automatically update our elog       Re: form posting , posted by Stefan Ritt on Sun Dec 12 12:40:53 2004  > however, I am not sure what elog checks for when doing the post through > form. and the auto-submit script always failed and returns "200 EOF". i can > get to the login part and grab form entry. its only the submittion failed.          Re: form posting , posted by Qiang on Tue Dec 14 07:32:07 2004  I happened to find something interesting when trying my perl script. it hangs the elog system with hand-crafted http header.             Re: form posting , posted by Stefan Ritt on Mon Dec 20 16:39:17 2004  > I happened to find something interesting when trying my perl script. it hangs the > elog system with hand-crafted http header.   forum entries not displayed in correct order, posted by Heiko Scheit on Sun Dec 19 16:55:03 2004  I just submitted a reply to elog:847 (the reply is elog:853). Normally the thead containing the reply should now be listed as the top thread.  Instead only the original message of the thread   external authentication possible?, posted by Steve Allen on Mon Dec 6 02:34:32 2004  In order to avoid having to remember multiple usernames/passwords for different systems, is it possible for ELOG to use external authentication via Active Directory, etc?       Re: external authentication possible?, posted by Stefan Ritt on Mon Dec 6 21:22:20 2004  > In order to avoid having to remember multiple usernames/passwords for > different systems, is it possible for ELOG to use external authentication > via Active Directory, etc?          Re: external authentication possible?, posted by Steve Jones on Mon Dec 6 22:48:19 2004  > > In order to avoid having to remember multiple usernames/passwords for > > different systems, is it possible for ELOG to use external authentication > > via Active Directory, etc?             Re: external authentication possible?, posted by Steve Allen on Tue Dec 7 01:18:14 2004  > > > In order to avoid having to remember multiple usernames/passwords for > > > different systems, is it possible for ELOG to use external authentication > > > via Active Directory, etc?             Re: external authentication possible?, posted by Stefan Ritt on Sun Dec 12 12:49:06 2004  > The only common denominator that could possibly cover all contingencies would > be LDAP authentication.  One way of doing this in a more-or-less universal > fashion is to offload the auth task from eLog itself and place the burden on                Re: external authentication possible?, posted by Steve Jones on Wed Dec 15 15:42:13 2004  > > The only common denominator that could possibly cover all contingencies would > > be LDAP authentication.  One way of doing this in a more-or-less universal > > fashion is to offload the auth task from eLog itself and place the burden on                   Re: external authentication possible?, posted by Stefan Ritt on Wed Dec 15 18:19:31 2004  > Ah, you test me!  Perhaps I will attempt to dig into this but I may have to leave the > integration up to you, Stefan.  Seems that there would be two roads to go: > 1> Move away from standalone and start to rely on Apache                      Re: external authentication possible?, posted by Steve Jones on Thu Dec 16 05:23:54 2004  > > Ah, you test me!  Perhaps I will attempt to dig into this but I may have to leave the > > integration up to you, Stefan.  Seems that there would be two roads to go: > > 1> Move away from standalone and start to rely on Apache   Anyone try doing majordomo->Elog?, posted by auser on Thu Dec 9 18:39:15 2004  Hi all,       Re: Anyone try doing majordomo->Elog?, posted by Stefan Ritt on Sun Dec 12 12:43:55 2004  > We currently have Elog postings mirrored on to a majordomo email list.  > Invariably, people on this list reply to the listserv and not to the Elog.  > Has anyone tried getting emails to a listserv to autoformat and register as   dropdown-lists display only the first 100 entries, posted by Guenter Nowak on Tue Dec 7 15:46:15 2004          Re: dropdown-lists display only the first 100 entries, posted by Stefan Ritt on Tue Dec 7 16:15:28 2004  Right. Number of options is limited to 100.          Re: dropdown-lists display only the first 100 entries, posted by Guenter Nowak on Thu Dec 9 11:30:07 2004  > Right. Number of options is limited to 100. hi, i found the MAX_N_LIST macro and increased it             Re: dropdown-lists display only the first 100 entries, posted by Stefan Ritt on Thu Dec 9 11:40:05 2004  > > Right. Number of options is limited to 100. > hi, i found the MAX_N_LIST macro and increased it   back button does not work, posted by Guenter Nowak on Mon Dec 6 17:42:59 2004  hi the back button/liunk does not work if i click on an entry and then back, it does not work properly, i see the        Re: back button does not work, posted by Stefan Ritt on Mon Dec 6 21:48:19 2004  > hi > the back button/liunk does not work > if i click on an entry and then back, it does not work properly, i see the           Re: back button does not work, posted by Guenter Nowak on Thu Dec 9 11:30:49 2004  > > hi > > the back button/liunk does not work > > if i click on an entry and then back, it does not work properly, i see the    ELOG-Server crashes after date entry, posted by Ulrich Trüssel on Fri Dec 3 08:43:49 2004  God really STRANGE and problematic effect on 2.5.5-1 (can't remember it this was with 2.5.5 or 2.5.4-X but i'm nearly sure it worked well):   , posted by on Fri Dec 3 08:43:49 2004  God really STRANGE and problematic effect on 2.5.5-1 (can't remember it this was with 2.5.5 or 2.5.4-X but i'm nearly sure it worked well):       Re: ELOG-Server crashes after date entry, posted by Stefan Ritt on Sun Dec 5 13:09:12 2004  'Date' attributes can only be between 1970 and 2037, since I use internally the unix time format. I added a test so future versions will complain and not crash when the date is outside that range.   Attribute Negative Search, posted by Rich Persaud on Wed Nov 24 00:42:10 2004  Is there any way to search for all attributes _except_ a certain value?       Re: Attribute Negative Search, posted by Stefan Ritt on Wed Nov 24 13:55:22 2004  > Is there any way to search for all attributes _except_ a certain value? If you mean "search all attrubutes except one specific attribute" then the          Re: Attribute Negative Search, posted by Rich Persaud on Wed Nov 24 18:59:45 2004  > > Can "Display" links work with multiple options?  > > > > "ABC | DEF" is currently one link.             Re: Attribute Negative Search, posted by Stefan Ritt on Thu Nov 25 08:42:07 2004  > Display Subsystem = <a href="/LogBook1/?Subsystem=$Subsystem" style="color: > saddlebrown">$Subsystem</a> >    BUG: lost entry data, posted by Rich Persaud on Wed Nov 24 00:17:45 2004  After THREE tries to enter a long detailed list of questions, all have been  replaced by just one:  why do ELOG textareas and entry forms lose all data  if the browser goes back/forward?  Or if a submission causes an error?         Re: BUG: lost entry data, posted by Stefan Ritt on Wed Nov 24 11:52:26 2004  > After THREE tries to enter a long detailed list of questions, all have been  > replaced by just one:  why do ELOG textareas and entry forms lose all data  > if the browser goes back/forward?  Or if a submission causes an error?            Re: BUG: lost entry data, posted by Rich Persaud on Wed Nov 24 19:05:53 2004  > > After THREE tries to enter a long detailed list of questions, all have been  > > replaced by just one:  why do ELOG textareas and entry forms lose all data  > > if the browser goes back/forward?  Or if a submission causes an error?     Konqueror and Calendar widget, posted by Rich Persaud on Wed Nov 24 00:44:09 2004  Date selection from the calendar widget does not work in Konqueror.   Clicking on a date results in year being populated, but month and day are        Re: Konqueror and Calendar widget, posted by Stefan Ritt on Wed Nov 24 14:19:01 2004  > Date selection from the calendar widget does not work in Konqueror.   >  > Clicking on a date results in year being populated, but month and day are    New ELOG version with XML and CSV import/export, posted by Stefan Ritt on Fri Mar 26 09:41:56 2004  Version 2.5.2 of ELOG has been released today. It contains CSV (comma separated values) import and export, as well as XML export (through the "Find" page). Since these features are new, I would appreciate some feedback       Re: New ELOG version with XML and CSV import/export, posted by Charles Duncan on Mon Mar 29 17:44:32 2004  > Version 2.5.2 of ELOG has been released today. It contains CSV (comma > separated values) import and export, as well as XML export (through the > "Find" page). Since these features are new, I would appreciate some feedback          Re: New ELOG version with XML and CSV import/export, posted by Stefan Ritt on Mon Mar 29 18:06:46 2004  > I was able to find the export feature under find. Could you let me know where  > the import feature is? Or how I turn it on.             Re: New ELOG version with XML and CSV import/export, posted by Neil Swartz on Tue Nov 23 05:41:31 2004  > > I was able to find the export feature under find. Could you let me know where  > > the import feature is? Or how I turn it on. >                 Re: New ELOG version with XML and CSV import/export, posted by Stefan Ritt on Tue Nov 23 12:42:43 2004  > I needed the export feature and could not find documentation on it in the latest  > version. I finally read the code and added Find Menu Text = <filename> > where filename had the tags XML, CSV1, and CSV2                   Re: New ELOG version with XML and CSV import/export, posted by Neil Swartz on Wed Nov 24 03:30:31 2004  > > I needed the export feature and could not find documentation on it in the latest  > > version. I finally read the code and added Find Menu Text = <filename> > > where filename had the tags XML, CSV1, and CSV2                      Re: New ELOG version with XML and CSV import/export, posted by Stefan Ritt on Wed Nov 24 11:45:07 2004  > BTW, > Is there any way to turn off the Text column at the right side of the list?   Multi-parent relationships between logbook items, posted by Rich Persaud on Wed Nov 24 00:50:27 2004  Could there be a multi-value option for free text fields, e.g. comma- separated?  This would allow multi-parent relationships between log items.    Non-wildcard or numeric search for numeric attribute, posted by Rich Persaud on Wed Nov 24 00:48:17 2004  Is there a way to disable wildcard matching in searches? A search for "1" returns "1" and "10" and "11".     Display links for multiple-option attributes, posted by Rich Persaud on Wed Nov 24 00:45:43 2004  Can "Display" links work with multiple options?  "ABC | DEF" is currently one link.   compiling elog on AMD64, posted by Heiko Scheit on Wed Nov 17 18:52:40 2004  When compiling elogd on AMD64 (in 64 bit mode) there are many  warnings like these:       Re: compiling elog on AMD64, posted by Stefan Ritt on Thu Nov 18 09:40:25 2004  > When compiling elogd on AMD64 (in 64 bit mode) there are many  > warnings like these: >           Re: compiling elog on AMD64, posted by Heiko Scheit on Sun Nov 21 00:46:28 2004  > > When compiling elogd on AMD64 (in 64 bit mode) there are many  > > warnings like these: > >    Partial Bulgarian translation, posted by Ognyan Kulev on Sat Nov 20 19:44:57 2004  Hi, we are using ELOG for keeping track of a server maintainance.  I've translated some of ELOG's strings.  The file is attached.  There will be more translations, when I get inspired again ;-)   elog password access without users, posted by damon nettles on Tue Nov 16 17:49:54 2004  is there a way to set up a logbook so that a password is required to get into it, but no username?       Re: elog password access without users, posted by Stefan Ritt on Tue Nov 16 18:07:31 2004  > i          Re: elog password access without users, posted by damon nettles on Tue Nov 16 22:06:29 2004  > > is there a way to set up a logbook so that a password is required to get > > into it, but no username? >              Re: elog password access without users, posted by Stefan Ritt on Tue Nov 16 22:45:24 2004  > thanks. that seems to get me the functionality i needed. is there any way to > get rid of the username line when using the "Read Password" feature?   elog password access without users, posted by damon nettles on Tue Nov 16 17:49:54 2004  is there a way to set up a logbook so that a password is required to get into it, but no username?       Re: elog password access without users, posted by Stefan Ritt on Tue Nov 16 18:07:31 2004  > i          Re: elog password access without users, posted by damon nettles on Tue Nov 16 22:06:29 2004  > > is there a way to set up a logbook so that a password is required to get > > into it, but no username? >              Re: elog password access without users, posted by Stefan Ritt on Tue Nov 16 22:45:24 2004  > thanks. that seems to get me the functionality i needed. is there any way to > get rid of the username line when using the "Read Password" feature?   stunnel problems with new version, posted by damon nettles on Mon Nov 15 20:50:01 2004  i am trying to implement ssl features on our logbooks. however, it seems that stunnel has drastically changed their program and the usual startup procedures listed on the elog page don't work.       Re: stunnel problems with new version, posted by Stefan Ritt on Mon Nov 15 21:25:34 2004  > i am trying to implement ssl features on our logbooks. however, it seems > that stunnel has drastically changed their program and the usual startup > procedures listed on the elog page don't work.          Re: stunnel problems with new version, posted by damon nettles on Mon Nov 15 21:59:56 2004  > > i am trying to implement ssl features on our logbooks. however, it seems > > that stunnel has drastically changed their program and the usual startup > > procedures listed on the elog page don't work.   $message id gives wrong value - Gernman traslalation of Back, posted by Ulrich Trüssel on Fri Nov 5 16:59:30 2004  1. I do not know if this is a problen of the 2.5.5 (11/03/04) version or of       Re: $message id gives wrong value - Gernman traslalation of Back, posted by Stefan Ritt on Fri Nov 5 17:45:47 2004  > the "$message id" will not be replaced by the msg id, the string "$message > id"  will be dispalyed and used. Other substitutions as $logbook etc. are > working.          Re: $message id gives wrong value - Gernman traslalation of Back, posted by Ulrich Trüssel on Fri Nov 5 21:37:56 2004  1. thats now clear with the £message id and the work-around is ok for my  needs             Re: $message id gives wrong value - Gernman traslalation of Back, posted by Stefan Ritt on Sat Nov 6 11:29:52 2004  > 2. the "bacl" link is clear and tranlated to "Liste". But I mean the back  > button  > in the entry and the edit mode (see picture)...  ;-)                Re: $message id gives wrong value - Gernman traslalation of Back, posted by Ulrich Trüssel on Sun Nov 7 09:49:13 2004  installed elog 2.5.5 agin, same effekt with "back" / "zurück". checked the  language file eloglang.german witch seem ok for me and the translations are  well done. removed then in eloglang.germen the traslation for back and checked    Can the elog client submit an entry with a html body?, posted by Kristinn B. Gylfason on Tue Nov 2 02:51:09 2004  I'm running a Debian package of elog with verision number 2.5.4+r1480-1.  The revision of the elog client in this package is 1.21.        Re: Can the elog client submit an entry with a html body?, posted by Stefan Ritt on Tue Nov 2 17:47:43 2004  > Is it possible to submit an entry with a html body using the elog client? I added a "-H" flag for that. New version of elog.c under CVS and in the next          Re: Can the elog client submit an entry with a html body?, posted by Kristinn B. Gylfason on Tue Nov 2 18:15:09 2004  > > Is it possible to submit an entry with a html body using the elog client? >  > I added a "-H" flag for that. New version of elog.c under CVS and in the next   , posted by on Thu Aug 19 16:20:16 2004  Here are some things for your wish list:                                                                                                                          1) elogd should report quota or disk-full problem:  In case a logbook                  , posted by on Fri Oct 29 20:14:17 2004  > 1) elogd should report quota or disk-full problem:  In case a logbook            >    entry cannot be saved (quota or disk full) then a message like                >    'Could not save last entry.  Please contact administrator.' should                     Re: some things for your wishlist, posted by Heiko Scheit on Sun Oct 31 20:09:31 2004  > > - Use "and" and "or" operands in queries                                         >  > Elog supports now regular expressions. So for a "<str1> OR <str2>" one can write       Re: , posted by Stefan Ritt on Mon Nov 1 13:49:12 2004  > 2) default page view per user, i.e. the 'Back' link goes to                      >    ?mode=Full,summary,... depending on the user that is logged in.               >    Some users complained that 'Back' is not really back.  Maybe                    Compile of Elog , posted by Martin R. Picchio on Mon Nov 1 03:08:34 2004  If I make changes to the elog source, How do I re-compile it and not  distrupt the program??????       Re: Compile of Elog , posted by Stefan Ritt on Mon Nov 1 13:45:47 2004  > If I make changes to the elog source, How do I re-compile it and not  > distrupt the program??????   , posted by on Mon Oct 25 23:16:39 2004  I implemented experimentally RSS feeds into Elog. Before releasing this new addition, I would like to collect some experience with it. This forum now supports RSS feeds, for which you can subscribe with a RSS feed reader like       Re: Announcement of RSS feeds, posted by Marc Neiger on Thu Nov 11 01:04:01 2004  Great, but what's the corresponding URL for the RSS feed itself > I implemented experimentally RSS feeds into Elog. Before releasing this new   Elog Service Terminated, posted by Geo Geo on Fri Oct 15 07:59:35 2004  Hi I have a problem here which the ELOG service get terminated unexpectedly on the Windows Server.       Re: Elog Service Terminated, posted by Geo Geo on Sat Oct 16 20:32:54 2004  > Hi > I have a problem here which the ELOG service get terminated unexpectedly > on the Windows Server.   , posted by on Mon Oct 11 22:57:58 2004  Hello to all, i'm running ELOG on FreeBSD 5.2. We've noticed an issue where e-mail notification from ELOG seem to       , posted by on Wed Oct 13 20:48:52 2004  > Date:  Mon, 11 Oct 2004 12:26:28 -3736512 The timezone offset (-3736512) is obtained from the "timezone" variable, which          Re: ELOG e-mail notifications - their arrival time is wrong, posted by G on Sun Oct 17 22:47:39 2004  Ok, i compiled the code below and ran it, it prints out:   Elog Service Terminated, posted by Geo Geo on Fri Oct 15 07:59:35 2004  Hi I have a problem here which the ELOG service get terminated unexpectedly on the Windows Server.       Re: Elog Service Terminated, posted by Stefan Ritt on Fri Oct 15 08:15:38 2004  > I   Extra 'append on edit' action when adding attachment, posted by Mike Stolove on Thu Oct 14 16:33:51 2004  I have the following in a local logbook config:      append on edit = "\n\n[$date: $short_name]\n"        Re: Extra 'append on edit' action when adding attachment, posted by Stefan Ritt on Thu Oct 14 21:45:32 2004  I fixed that in revision 1.496 (see CVS).   Extra 'append on edit' action when adding attachment, posted by Mike Stolove on Thu Oct 14 16:33:51 2004  I have the following in a local logbook config:      append on edit = "\n\n[$date: $short_name]\n"        Re: Extra 'append on edit' action when adding attachment, posted by Stefan Ritt on Thu Oct 14 21:45:32 2004  I fixed that in revision 1.496 (see CVS).   , posted by on Tue Oct 12 10:54:04 2004  It would be nice if elogd would recognise the whole of this as a link http://support.microsoft.com/default.aspx?scid=kb;en-us;138354 rather than  just the first bit.       , posted by on Wed Oct 13 20:28:02 2004  Has been fixed in revision 1.492.          Re: URL Parsing Problem, posted by RB on Thu Oct 14 11:37:18 2004  > Has been fixed in revision 1.492. Thanks, Stefan.   deleting the sole single entry in log causes crash with xrealloc, posted by Mike Stolove on Sat Oct 9 14:25:23 2004  When creating new logbooks, I will create a single entry to test the   configuration. After revising the configuration I want to delete that   single entry and create a new one based on the revised config.         Re: deleting the sole single entry in log causes crash with xrealloc, posted by Stefan Ritt on Mon Oct 11 21:41:58 2004  This problem has been fixed in revision 1.491 and will be published in version 2.5.4-6.   Windows XP Login Problem..., posted by Gulzaman on Tue Oct 5 16:37:44 2004  We are trying to use ELog on Windows XP with Protection on individual log  book and we unable to login after creating users even if we give correct  user name and password login screen reappears. We are able to log in to the        Re: Windows XP Login Problem..., posted by Stefan Ritt on Thu Oct 7 01:27:27 2004  > W          Re: Windows XP Login Problem..., posted by Gulzaman on Thu Oct 7 11:01:00 2004  > >             Re: Windows XP Login Problem..., posted by Gulzaman on Sat Oct 9 11:04:37 2004  > > > We are trying to use ELog on Windows XP with Protection on individual log  > > > book and we unable to login after creating users even if we give correct  > > > user name and password login screen reappears. We are able to log in to the    Enhanced "eLog Version" Variable, posted by Steve Jones on Fri Sep 24 19:17:52 2004  Stefan, would it be ok to add the "minor" revision level to the VERSION constant?  I've been doing this after I download source just so I can keep things straight, you keep cranking out versions ;->       Re: Enhanced "eLog Version" Variable, posted by Stefan Ritt on Fri Sep 24 22:37:01 2004  Sorry for that. The idea is that the -4 is the minor number between releases (mainly for bug fixes and impatient users (;-) ). I accidently overwrote the -4 version several times when testing a new RPM building scheme, but I promise          Re: Enhanced "eLog Version" Variable, posted by Steve Jones on Wed Oct 6 06:14:36 2004  No big deal - I looked at the code and you did a much more thorough job than I would have done. Appreciate all of the hard work -- this product is masterful!   Attachment file "" empty or not found, posted by roets on Tue Sep 28 22:44:50 2004  I am getting the following error message with version 2.5.4-4 when I try to add a new entry to a log book.       Re: Attachment file "" empty or not found, posted by Stefan Ritt on Wed Sep 29 01:28:22 2004  That problem has been fixed in 2.5.4-5   too many <table> tags, posted by Heiko Scheit on Mon Aug 2 14:56:56 2004  There are too many <table> tags when displaying a singel entry.  E.g. in http://midas.psi.ch/elogs/Config+Examples/1 the row 'Configuration Name' is not aligned with the others (see attachment).       Re: too many <table> tags, posted by Stefan Ritt on Tue Aug 3 11:16:46 2004  > There are too many <table> tags when displaying a singel entry.  E.g. > in http://midas.psi.ch/elogs/Config+Examples/1 the row 'Configuration Name' > is not aligned with the others (see attachment).          Re: too many <table> tags, posted by Heiko Scheit on Tue Aug 3 13:06:54 2004  > > There are too many <table> tags when displaying a singel entry.  E.g. > > in http://midas.psi.ch/elogs/Config+Examples/1 the row 'Configuration Name' > > is not aligned with the others (see attachment).             Re: too many <table> tags, posted by Stefan Ritt on Tue Aug 3 13:31:08 2004  > Couldn't one include the extra <table> tag only when there is really more than > one attribute per line.  All other lines could then be aligned properly.                Re: too many <table> tags, posted by Steve Jones on Thu Aug 12 23:32:46 2004  > > Couldn't one include the extra <table> tag only when there is really more than > > one attribute per line.  All other lines could then be aligned properly. >                    Re: too many <table> tags, posted by Stefan Ritt on Wed Sep 15 07:42:23 2004  > > > Couldn't one include the extra <table> tag only when there is really more than > > > one attribute per line.  All other lines could then be aligned properly.   text display of ascii files not a good idea, posted by Heiko Scheit on Mon Aug 23 13:43:58 2004  I think the text display of ASCII files, which is new in version 2.5.4, is not a good idea.  E.g. I had a large ps file attached to one entry and it took a long time display this entry (over DSL).       Re: text display of ascii files not a good idea, posted by T. Ribbrock on Tue Sep 7 13:05:49 2004  [...] > Probably it is fine to display only files ending in '.txt' per default. > In addition a file that has more than say 1000 lines should probably           Re: text display of ascii files not a good idea, posted by Stefan Ritt on Wed Sep 8 13:46:56 2004  > [...] > > Probably it is fine to display only files ending in '.txt' per default. > > In addition a file that has more than say 1000 lines should probably              Re: text display of ascii files not a good idea, posted by Heiko Scheit on Wed Sep 8 23:35:01 2004  > > [...] > > > Probably it is fine to display only files ending in '.txt' per default. > > > In addition a file that has more than say 1000 lines should probably                 Re: text display of ascii files not a good idea, posted by Stefan Ritt on Wed Sep 15 04:08:46 2004  > So a configurable size limit seems appropriate, from which on  > only 'Display attachment' is displayed.  And/Or, for files > exceeding this limit, the first N (new config option) lines could be displayed.   Use Email From not Working as Before..., posted by Christopher Jones on Mon Sep 13 20:44:35 2004  Hi, We just recently upgraded from an older version of Elog to the latest and       , posted by on Wed Sep 15 00:16:19 2004  I g   elogd does not exit on SIGTERM, posted by Heiko Scheit on Wed Feb 18 16:54:27 2004  When trying to stop elogd processes with the kill command elogd exits only after access to the logbook.       Re: elogd does not exit on SIGTERM, posted by Stefan Ritt on Thu Feb 19 09:38:13 2004  Noee. Here it works immediately. Can you try with a fresh server from the distribution, with the example           Re: elogd does not exit on SIGTERM, posted by Heiko Scheit on Fri Aug 27 00:49:27 2004  > Noee. Here it works immediately. >  > Can you try with a fresh server from the distribution, with the example              Re: elogd does not exit on SIGTERM, posted by Stefan Ritt on Wed Sep 8 17:38:54 2004  > elogd does not exit if there is an 'unprocessed' HUP.  So when you do  >  > kill -HUP <pid>                Re: elogd does not exit on SIGTERM, posted by Heiko Scheit on Wed Sep 8 23:03:36 2004  > > elogd does not exit if there is an 'unprocessed' HUP.  So when you do  > >  > > kill -HUP <pid>                   Re: elogd does not exit on SIGTERM, posted by Stefan Ritt on Thu Sep 9 21:40:47 2004  > kill -HUP <pid>; sleep 2; kill <pid> Thanks, I could reproduce the problem. It had to do that a SIGHUP aborts the select()   URL bug in elogd.cfg, posted by Steve Jones on Mon Aug 16 23:49:13 2004  Under 2.5.4-2 build1.460, when I edit the demo elogd.cfg the following happens: - I start with       Re: URL bug in elogd.cfg, posted by Stefan Ritt on Wed Sep 8 12:19:00 2004  This problem has been fixed in revision 1.462          Re: URL bug in elogd.cfg, posted by Steve Jones on Wed Sep 8 17:39:43 2004  > This problem has been fixed in revision 1.462 Thank you!   PostScript Files shown as text., posted by Bryan Moffit on Fri Sep 3 20:17:35 2004  At some point, in the last week or so, I upgraded the debian-unstable version (r1459-1) of elog.  Now, PostScript files (as attachments) are displayed (shown in ascii text, instead of just showing the link).         Re: PostScript Files shown as text., posted by Stefan Ritt on Wed Sep 8 15:52:00 2004  > At some point, in the last week or so, I upgraded the debian-unstable > version (r1459-1) of elog.  Now, PostScript files (as attachments) are > displayed (shown in ascii text, instead of just showing the link).     Locking entries, posted by filantoro on Wed Sep 1 03:42:22 2004  I have a question about ELOG. Let's say after the user finishes his shift  and passess on to the next user on duty. A staff member would want to look  through the entries and vet them. The staff could lock the entries to        Re: Locking entries, posted by Stefan Ritt on Wed Sep 8 15:48:47 2004  One possibility is to use the option "Restrict edit time = <hours>". This way an entry can only be edited let's say 8 hours after it has been created.   ELOG with stunnel won't show logbook, posted by Bartjan Wattel on Wed Aug 25 13:36:56 2004  Hi, I have an ELOG installation on a RedHat linux server, called myserver. I        Re: ELOG with stunnel won't show logbook, posted by Stefan Ritt on Wed Sep 8 15:37:09 2004  That bug has been fixed recently, please update to the newest version.   write access for elogd, posted by Dave Becker on Thu Aug 19 06:21:38 2004  Newly installed elog gives this response when I try to submit a new record: New entry cannot be written to directory "./logbooks/Linux/"        Re: write access for elogd, posted by Stefan Ritt on Wed Sep 8 12:36:08 2004  > Newly installed elog gives this response when I try to submit a new record: >  > New entry cannot be written to directory "./logbooks/Linux/"    Admin rights lost after upgrade 2.5.2 to 2.5.4, posted by nait tauh on Wed Aug 18 11:12:56 2004  The upgrade was done by just replacing elogd from 2.5.2 to 2.5.4 from the rpm. Somehow elogd 2.5.4 treat all users as normal user. When clicking on       Re: Admin rights lost after upgrade 2.5.2 to 2.5.4, posted by Stefan Ritt on Wed Sep 8 12:25:20 2004  > Somehow elogd 2.5.4 treat all users as normal user. When clicking on > "config". All admin users has no "change elogd.cfg" button. Revert back to > 2.5.2 OK.   Q: on 'FIND MENU commands =' <menu list>, posted by Steve Jones on Wed Aug 11 18:02:22 2004  The help text on the website says the following: "The command Select can be used to select multiple messages for deletion of       Re: Q: on 'FIND MENU commands =' <menu list>, posted by Stefan Ritt on Thu Aug 12 21:10:29 2004  > The help text on the website says the following: >  > "The command Select can be used to select multiple messages for deletion of          Re: Q: on 'FIND MENU commands =' <menu list>, posted by Steve Jones on Thu Aug 12 22:17:01 2004  > > The help text on the website says the following: > >  > > "The command Select can be used to select multiple messages for deletion of             Re: Q: on 'FIND MENU commands =' <menu list>, posted by Stefan Ritt on Thu Aug 12 22:24:04 2004  > Thank you.  I had added the "Move To" and this works at the log entry level (i.e., "Move > To <name>) but in the threaded view one does not get the enumerated list                Re: Q: on 'FIND MENU commands =' <menu list>, posted by Steve Jones on Thu Aug 12 23:55:00 2004  > > Thank you.  I had added the "Move To" and this works at the log entry > level (i.e., "Move > > To <name>) but in the threaded view one does not get the enumerated list                   Re: Q: on 'FIND MENU commands =' <menu list>, posted by Stefan Ritt on Wed Sep 8 11:44:56 2004  > Hmmm.  I like the little buttons with the pull-downs for selections.  > Unfortunately, I don't get that.  With a config of: >    Options Items limits, posted by Patricio Castro on Tue Aug 31 20:29:20 2004  Hello friends,  Exist some form to increase limits of items (100) in the Options List       Re: Options Items limits, posted by Steve Jones on Wed Sep 1 22:25:01 2004  > Hello friends,  >  > Exist some form to increase limits of items (100) in the Options List          Re: Options Items limits, posted by Stefan Ritt on Tue Sep 7 17:49:50 2004  > > Hello friends,  > >  > > Exist some form to increase limits of items (100) in the Options List   PostScript Files shown as text., posted by Bryan Moffit on Fri Sep 3 20:17:20 2004  At some point, in the last week or so, I upgraded the debian-unstable version (r1459-1) of elog.  Now, PostScript files (as attachments) are displayed (shown in ascii text, instead of just showing the link).     PostScipt Files shown as text., posted by Bryan Moffit on Fri Sep 3 20:17:12 2004  At some point, in the last week or so, I upgraded the debian-unstable version (r1459-1) of elog.  Now, PostScript files (as attachments) are displayed (shown in ascii text, instead of just showing the link).     Q: On Solaris 8, eLog not honoring USR= and GRP= cfg file directives?, posted by Steve Jones on Wed Aug 11 18:12:35 2004  I'm not sure if this is a configuration problem or a bug, but running v2.5.4subver1.413, elogd runs as user ROOT (UID0) even though the following is in the elogd.cfd file:       Re: Q: On Solaris 8, eLog not honoring USR= and GRP= cfg file directives?, posted by Stefan Ritt on Thu Aug 12 21:37:29 2004  > I'm not sure if this is a configuration problem or a bug, but running > v2.5.4subver1.413, elogd runs as user ROOT (UID0) even though the following > is in the elogd.cfd file:          Re: Q: On Solaris 8, eLog not honoring USR= and GRP= cfg file directives?, posted by Steve Jones on Thu Aug 12 22:18:56 2004  > > I'm not sure if this is a configuration problem or a bug, but running > > v2.5.4subver1.413, elogd runs as user ROOT (UID0) even though the following > > is in the elogd.cfd file:             Re: Q: On Solaris 8, eLog not honoring USR= and GRP= cfg file directives?, posted by Stefan Ritt on Thu Aug 12 22:25:45 2004  > Just for grins, what version of compiler are you using under Linux? gcc 3.2.2 (from RedHat Linux 9.0)                Re: Q: On Solaris 8, eLog not honoring USR= and GRP= cfg file directives?, posted by Steve Jones on Mon Aug 16 21:48:49 2004  > > Just for grins, what version of compiler are you using under Linux? >  > gcc 3.2.2 (from RedHat Linux 9.0)   Restricting viewing messages, posted by Jen Manz on Wed Aug 11 15:38:07 2004  I am working on a logbook for a lab.  I have two questions... First - Some of the logbook entries should not be viewed by certain users.   What would be the easiest way to restrict viewing some entries?         Re: Restricting viewing messages, posted by Stefan Ritt on Wed Aug 11 16:02:52 2004  > First - Some of the logbook entries should not be viewed by certain users.   > What would be the easiest way to restrict viewing some entries?     THREAD DISPLAY = sucks up coded spaces, posted by Steve Jones on Fri Aug 6 22:35:10 2004  I was trying to do some hard coded spaces using: Thread display = For: $Date for Shutdown.   $DataCenter:       Re: THREAD DISPLAY = sucks up coded spaces, posted by Stefan Ritt on Sun Aug 8 16:25:09 2004  > I was trying to do some hard coded spaces using: >  > Thread display = For: $Date for Shutdown.   $DataCenter:          Re: THREAD DISPLAY = sucks up coded spaces, posted by Steve Jones on Tue Aug 10 20:11:38 2004  > > I was trying to do some hard coded spaces using: > >  > > Thread display = For: $Date for Shutdown.   $DataCenter:   Login/Logout problem with elog and their solution, posted by Stefan Ritt on Thu Aug 5 10:49:21 2004  Hi everybody, several people have reported of strange problems concering the login/logout   User/Admin privlege question, posted by Ralph Kuehn on Thu May 20 00:55:51 2004  Hello, For some reason if I define a "login user" that is allowed the configure       Re: User/Admin privlege question, posted by Stefan Ritt on Fri May 21 14:43:09 2004  > For some reason if I define a "login user" that is allowed the configure > option he is also allowed to change the configuration file. According to the > documentation it seems like this should NOT be the case. Any ideas as to          Re: User/Admin privlege question, posted by Alexandre Camsonne on Fri Jul 2 15:18:20 2004  Hi,  I also have this problem, when a non admin user logs in he does not have access to the config file but if he logs out he can then access the config file as non logged             Re: User/Admin privlege question, posted by Stefan Ritt on Wed Jul 7 17:43:22 2004  > I also have this problem, when a non admin user logs in he does not have access to > the config file but if he logs out he can then access the config file as non logged > user.                Re: User/Admin privlege question, posted by Alexandre Camsonne on Tue Aug 3 05:31:08 2004  Dear Stefan, I eventually tried the latest version from the CVS.  And it is odd because like when I tried version 2.5.3, it is like it ignores                   Re: User/Admin privlege question, posted by Stefan Ritt on Tue Aug 3 12:46:55 2004  I just see your [global] part of elogd.cfg, could you send me the complete file? What you also could try is to delete all cookies stored in your browser. The way                      Re: User/Admin privlege question, posted by Alexandre Camsonne on Tue Aug 3 14:51:34 2004  The elogd.cfg is attached in the previous message as attachement 3. Sorry it is a little bit buried between pictures. The reason I put the picture of the global elogd.cfg is to show that the not logged                         Re: User/Admin privlege question, posted by Stefan Ritt on Tue Aug 3 16:34:23 2004  Ok, now I see your problem. You defined a "Guest menu commands" which explicitly allows not-authorized access (that's what it's for). If you only want to allow authorized access, remove the "guest menu commands" from the logbook sections and also from the                            Re: User/Admin privlege question, posted by Alexandre Camsonne on Tue Aug 3 20:14:55 2004  Thank you, I misunderstood how the "Guest menu commands" worked I thought I had to specify a limited set of commands to actually limit guest users.   speeding up elog : gcc compile optimizations, posted by Fred Hooper on Tue Jul 27 18:33:52 2004  Elog is a great program, but it can be slow. I noticed that the gcc compiler options in the tarball Makefile were not       Re: speeding up elog : gcc compile optimizations, posted by Stefan Ritt on Wed Jul 28 15:03:17 2004  > I noticed that the gcc compiler options in the tarball Makefile were not > conducive to speed.  There, I tried changing the gcc options to: >           Re: speeding up elog : gcc compile optimizations, posted by Fred Hooper on Sat Jul 31 16:55:21 2004  > > I noticed that the gcc compiler options in the tarball Makefile were not > > conducive to speed.  There, I tried changing the gcc options to: > >              Re: speeding up elog : gcc compile optimizations, posted by Stefan Ritt on Mon Aug 2 09:05:48 2004  > Is there something else  which is making this difficult to do? Not really, but hsearch() & Co. are not available under Windows, so I have to extract the                Re: speeding up elog : gcc compile optimizations, posted by Drew on Tue Aug 3 16:59:36 2004  > > Is there something else  which is making this difficult to do? >  > Not really, but hsearch() & Co. are not available under Windows, so I have to extract the   curly parenthesis problem , posted by Heiko Scheit on Tue Aug 3 15:44:07 2004  Everything after curly parenthesis is ignored in attribute entry boxes  like 'Subject' above       Re: curly parenthesis problem {smiley}, posted by Stefan Ritt on Tue Aug 3 16:18:45 2004  > Everything after curly parenthesis is ignored in attribute entry boxes  > like 'Subject' above >    Wishlist: TOOLTIP for ATTRIBUTES, posted by Steve Jones on Wed Jul 14 21:47:47 2004  Using the COMMENT feature to add guidance to an ATTRIBUTE works great, but is it possible to add a TOOLTIP <ATTRIBUTE> = so as to save screen space?  For a complex entry form it is desireable to try and have everything in a       Re: Wishlist: TOOLTIP for ATTRIBUTES, posted by Stefan Ritt on Wed Jul 14 22:21:55 2004  > Using the COMMENT feature to add guidance to an ATTRIBUTE works great, but > is it possible to add a TOOLTIP <ATTRIBUTE> = so as to save screen space?           Re: Wishlist: TOOLTIP for ATTRIBUTES, posted by Steve Jones on Wed Jul 14 22:54:43 2004  > > Using the COMMENT feature to add guidance to an ATTRIBUTE works great, but > > is it possible to add a TOOLTIP <ATTRIBUTE> = so as to save screen space?  >              Re: Wishlist: TOOLTIP for ATTRIBUTES, posted by Stefan Ritt on Thu Jul 15 10:01:03 2004  Ok, I added the option Tooltip <attribute> = ...                Re: Wishlist: TOOLTIP for ATTRIBUTES, posted by Steve Jones on Mon Aug 2 19:27:56 2004  > Ok, I added the option >  > Tooltip <attribute> = ...   ?cmd=New&pType=PC does not work, posted by Guenter Nowak on Fri Jul 30 02:03:59 2004  according to the users guide, http://midas.psi.ch/elogs/Database/?cmd=New&pType=PC       Re: ?cmd=New&pType=PC does not work, posted by Stefan Ritt on Fri Jul 30 09:15:39 2004  > according to the users guide, >  > http://midas.psi.ch/elogs/Database/?cmd=New&pType=PC       Re: ?cmd=New&pType=PC does not work, posted by Guenter Nowak on Fri Jul 30 12:26:10 2004  > according to the users guide, >  > http://midas.psi.ch/elogs/Database/?cmd=New&pType=PC   BUG?: Preset text = causes replication of text when re-editing a logbook entry., posted by Steve Jones on Fri Jul 16 19:06:35 2004  With the "Preset text = " specified, when re-editing a logbook entry (say to correct a spelling error) the text of the "Message" is replicated and placed directly below the original text.       Re: BUG?: Preset text = causes replication of text when re-editing a logbook entry., posted by Stefan Ritt on Wed Jul 28 21:39:21 2004  > With the "Preset text = " specified, when re-editing a logbook entry (say to > correct a spelling error) the text of the "Message" is replicated and placed > directly below the original text.          Re: BUG?: Preset text = causes replication of text when re-editing a logbook entry., posted by Steve Jones on Wed Jul 28 22:33:08 2004  > > With the "Preset text = " specified, when re-editing a logbook entry (say to > > correct a spelling error) the text of the "Message" is replicated and placed > > directly below the original text.   Date format problem in "Thread display = ", posted by Steve Jones on Fri Jul 16 16:53:01 2004  I have an attributes defined as:  - Attributes = Author, PlannedDate, FunctionalArea, Operation, Category,       Re: Date format problem in "Thread display = ", posted by Stefan Ritt on Wed Jul 28 21:34:35 2004  > I get the following in my THREADED logbook view: >  > "Adding new services, planned for 1090519200. Last revised: Thu Jul 15          Re: Date format problem in "Thread display = ", posted by Steve Jones on Wed Jul 28 22:32:39 2004  > > I get the following in my THREADED logbook view: > >  > > "Adding new services, planned for 1090519200. Last revised: Thu Jul 15   Bugs in newer updates w/ Debian install?, posted by Todd Corsa on Thu Jul 22 16:50:19 2004  I just updated ELOG using the latest elogd.c, and now my Quick Filters seem  to stop working after the first or second filter attempt. I find that if I  allow fewer quick filter options it seems to work more consistently. For        Re: Bugs in newer updates w/ Debian install?, posted by Stefan Ritt on Wed Jul 28 21:49:32 2004  > I just updated ELOG using the latest elogd.c, and now my Quick Filters seem  > to stop working after the first or second filter attempt.          Re: Bugs in newer updates w/ Debian install?, posted by Todd Corsa on Wed Jul 28 22:12:03 2004  > > I just updated ELOG using the latest elogd.c, and now my Quick Filters seem  > > to stop working after the first or second filter attempt. >    WISHLIST: Type <attribute> = user, posted by Steve Jones on Fri Jul 16 17:51:52 2004  Something to add to the wishlist: - Type <attribute> = user       Re: WISHLIST: Type <attribute> = user, posted by Stefan Ritt on Wed Jul 28 21:29:28 2004  Acknowledged. Added your vote to the wishlist.          Re: WISHLIST: Type <attribute> = user, posted by Steve Jones on Wed Jul 28 22:08:16 2004  > Acknowledged. Added your vote to the wishlist. Thanks!   getcfg problem in v1.410: Truncation of long config strings, posted by Steve Jones on Wed Jul 28 18:25:32 2004  Just compiled 1.410 and have run into an issue that *may* have been introduced in 1.393.       Re: getcfg problem in v1.410: Truncation of long config strings, posted by Stefan Ritt on Wed Jul 28 21:54:36 2004  > Just compiled 1.410 and have run into an issue that *may* have been > introduced in 1.393. >           Re: getcfg problem in v1.410: Truncation of long config strings, posted by Steve Jones on Wed Jul 28 22:07:31 2004  > > Just compiled 1.410 and have run into an issue that *may* have been > > introduced in 1.393. > >    Fixed Attribute Reply , posted by Geo Geo on Fri Jul 16 06:20:40 2004  Hi Stefan  YOu have been a great help on the Elog problem solving . I have another sort of bug , when i have a attribute type as date.       Re: Fixed Attribute Reply , posted by Stefan Ritt on Wed Jul 28 21:25:52 2004  > Hi Stefan  > YOu have been a great help on the Elog problem solving . > I have another sort of bug , when i have a attribute type as date.   List Dispaly produces wrong output in 2.5.3 built 23.7.04 (snapshot), posted by Ulrich Trüssel on Tue Jul 27 17:56:56 2004  I did not have the following problem in any snapshot before 23.7.04 . Actually I do not have a possibility to test the snapshot under an other system than win xp pro sp 1 (fully pached).        Re: List Dispaly produces wrong output in 2.5.3 built 23.7.04 (snapshot), posted by Stefan Ritt on Wed Jul 28 14:17:25 2004  > Using "List Display = <attributes>" produces an ususal output with the text > field content in the first row and a row title of the first 3 letters.          Re: List Dispaly produces wrong output in 2.5.3 built 23.7.04 (snapshot), posted by Ulrich Trüssel on Wed Jul 28 16:13:04 2004  Thank you very much Stefan!!! Also the horizontal alignement with "Format = 1" looks much better   as before   Author field on reply, posted by Geo Geo on Mon Jul 19 06:07:54 2004  Hi  I followed copied the example config provide to run on my server . Apparently , the author field was blank when i do a reply .       Re: Author field on reply, posted by Stefan Ritt on Wed Jul 28 14:14:05 2004  > I followed copied the example config provide to run on my server . > Apparently , the author field was blank when i do a reply . > I was hoping to get it to be the actual reply author.   Possible Formatting bug: Summary view, posted by Steve Jones on Wed Jul 14 22:52:18 2004  I've run into a situation where the SUMMARY view of a logbook will extend beyond the righthand border, thus requiring the user to scroll right.  This does not occur in FULL or THREAD mode.  Long lines in the TEXT attribute       Re: Possible Formatting bug: Summary view, posted by Stefan Ritt on Thu Jul 15 09:44:08 2004  > A temporary fix for this is to set summary lines = 0 Right, that's the only way. I would call this "permanent fix" (;-)          Re: Possible Formatting bug: Summary view, posted by Steve Jones on Fri Jul 16 04:37:47 2004  > > A temporary fix for this is to set summary lines = 0 >  > Right, that's the only way. I would call this "permanent fix" (;-)   Question on how "Format <attribute> = " works, posted by Steve Jones on Wed Jul 14 21:35:32 2004  It is not clear to me how "Format <attribute> = " works.  At first I thought it would allow me to rearrange how attributes are organized on the html "page"  using        Re: Question on how "Format <attribute> = " works, posted by Stefan Ritt on Wed Jul 14 21:53:02 2004  Just have a look at elog:571 which should answer your question. Also look at elog:Config+Examples/4 which is the configuration of this Forum (which as you can see has all attributes in a single line, even using different fonts).          Re: Question on how "Format <attribute> = " works, posted by Steve Jones on Wed Jul 14 22:59:05 2004  > Just have a look at elog:571 which should answer your question. Also look at > elog:Config+Examples/4 which is the configuration of this Forum (which as you can > see has all attributes in a single line, even using different fonts).             Re: Question on how "Format <attribute> = " works, posted by Stefan Ritt on Thu Jul 15 21:21:50 2004  > Ok, I think I see now.  I was assuming it applied to the entry form as well. Well, good idea. I implemented that. Have a look at this forum (just hit reply to this                Re: Question on how "Format <attribute> = " works, posted by Steve Jones on Fri Jul 16 04:36:51 2004  > > Ok, I think I see now.  I was assuming it applied to the entry form as well. >  > Well, good idea. I implemented that. Have a look at this forum (just hit reply to this   Request: limit size of attachments, posted by Bartjan Wattel on Wed Jul 14 13:58:26 2004  hi again, we have been doing a bit of stress testing for Elog. The most important        Re: Request: limit size of attachments, posted by Stefan Ritt on Thu Jul 15 22:01:55 2004  > Is it possible to add a flag in the configuration file, to specify the  > maximum size of an attachment?   Admin right, posted by Geo on Tue Jul 6 13:08:51 2004  HI  I have setup top group in my elog . I will want to restrict the different  admin user on the global and the global on top groups .       Re: Admin right, posted by Stefan Ritt on Fri Jul 9 10:32:52 2004  > I have setup top group in my elog . I will want to restrict the different  > admin user on the global and the global on top groups . > But however i am not able to use the configuration on "admin user" on the           Re: Admin right, posted by Geo Geo on Wed Jul 14 13:55:13 2004  Hi Stefan Thanks for your reply Can i check , with the new snap shot , can i disable the capability for the admin              Re: Admin right, posted by Stefan Ritt on Wed Jul 14 16:26:48 2004  > Can i check , with the new snap shot , can i disable the capability for the admin  > to delete the logbook and create new logbook > I tried with the config -   Always suppress email notifications, posted by Bartjan Wattel on Wed Jul 14 13:31:33 2004  Hi - again a configuration question. How can I suppress all email notifications? The "Suppress default = 2" flag        Re: Always suppress email notifications, posted by Stefan Ritt on Wed Jul 14 16:11:46 2004  > How can I suppress all email notifications? The "Suppress default = 2" flag  > allows me to always produce a notification, but the flag does not provide  > an option to never produce a notification. The flag "Suppress Email on    'Full' mode gives incorrect results when searching, posted by Bartjan Wattel on Wed Jul 14 11:45:46 2004  Hi,  I was just searching your online discussion forum for entries with the        Re: 'Full' mode gives incorrect results when searching, posted by Stefan Ritt on Wed Jul 14 12:12:35 2004  Thanks for pointing out this bug. I fixed it. New version under CVS.   How to construct different logbooks with the same logbook options, posted by Bartjan Wattel on Mon Jul 12 15:27:25 2004  Hi, I want to create a series of logbooks, say logbook A, and logbooks B up to        Re: How to construct different logbooks with the same logbook options, posted by Stefan Ritt on Mon Jul 12 15:57:39 2004  > I know I can simply copy the settings for logbook B and repeat the settings  > for all logbooks C-S. But is there a better way to accomplish this?          Re: How to construct different logbooks with the same logbook options, posted by Bartjan Wattel on Wed Jul 14 11:49:26 2004  > > I know I can simply copy the settings for logbook B and repeat the settings  > > for all logbooks C-S. But is there a better way to accomplish this? >              Re: How to construct different logbooks with the same logbook options, posted by Stefan Ritt on Wed Jul 14 11:57:18 2004  > Suppose I want to have different password files for all the logbooks, but I want to  > have a single (admin) user that can log in to all logbooks... Do I need to specify  > the admin data in all the different password files, or can I use one global    multiple "text entry" field, posted by darshak on Mon Jul 12 09:07:32 2004  Is it possible to add one more "text entry" field ?       Re: multiple "text entry" field, posted by Stefan Ritt on Mon Jul 12 09:31:03 2004  > Is it possible to add one more "text entry" field ? I guess you mean the main body text, which is multi-line. No, this is not          Re: multiple "text entry" field, posted by darshak on Wed Jul 14 08:57:37 2004  Your guess is correct. I would like to have that feature in ELOG. Thanks   An "options"-list starting with a " character is handled incorrectly , posted by Bartjan Wattel on Mon Jul 12 15:21:27 2004  An options list that starts with a double-quotes character (") is handled  incorrectly.        Re: An "options"-list starting with a " character is handled incorrectly , posted by Stefan Ritt on Mon Jul 12 15:54:11 2004  > Options Student name  = "Doe, John", "Foo, Bar". I fixed this bug. Please obtain the newest snapshot (see download page).   Locking the Text field, posted by Todd Corsa on Fri Jul 2 22:20:37 2004  Is there a way to disable editing of the textarea, but still allow editing  of other fields in the entry? (e.g. Fixed Attributes Edit = Text) Also, is the data entered in that field accessible through a variable like        Re: Locking the Text field, posted by Stefan Ritt on Wed Jul 7 18:13:26 2004  > Is there a way to disable editing of the textarea, but still allow editing  > of other fields in the entry? (e.g. Fixed Attributes Edit = Text)          Re: Locking the Text field, posted by Todd Corsa on Fri Jul 9 18:14:59 2004  > > Is there a way to disable editing of the textarea, but still allow editing  > > of other fields in the entry? (e.g. Fixed Attributes Edit = Text)             Re: Locking the Text field, posted by Todd Corsa on Mon Jul 12 15:13:56 2004  > > > Is there a way to disable editing of the textarea, but still allow editing  > > > of other fields in the entry? (e.g. Fixed Attributes Edit = Text) >    Formatting parameters for attributes, posted by Ulrich Trüssel on Fri Jun 25 20:09:21 2004  I have some problems of understanding how the "Format <attribute>" parameter is working. It may be, that there was a similar question in the forum, but I didn't find it. I'm sorry if I come back with an old question.       Re: Formatting parameters for attributes, posted by Stefan Ritt on Wed Jul 7 16:00:10 2004  > I have some problems of understanding how the "Format <attribute>" parameter > is working. It may be, that there was a similar question in the forum, but I > didn't find it. I'm sorry if I come back with an old question.          Re: Formatting parameters for attributes, posted by Ulrich Trüssel on Fri Jul 9 19:17:03 2004  Thank you Stefan! Just was out of the office for some days. There ar 2 questions in addition:             Re: Formatting parameters for attributes, posted by Stefan Ritt on Mon Jul 12 10:36:22 2004  > 1. Is there a possiblity to fix the position of the attribut fields if they are in > the same line? As. ex. if one attribute is empty or contain a very short value it may > be possible that the position of the following atrributes in the line are moving to                Re: Formatting parameters for attributes, posted by Ulrich Trüssel on Mon Jul 12 11:03:10 2004  Thank you Stefan! 1. Will help in the real hard cases!   ELOG & Selection Page, posted by G on Tue Jul 6 23:37:02 2004  Hello to all, I'm trying to get ELOG to run several separate logbooks which will       Re: ELOG & Selection Page, posted by Stefan Ritt on Thu Jul 8 22:01:06 2004  > The problem I have is I want to have a main selection type page so when a > user enters ELOG they see this page with links on it to main logbook groups.          Re: ELOG & Selection Page, posted by G on Thu Jul 8 23:41:43 2004  Great! That takes care of the problem for sure. Cheers once again for such a quick response.   Only show log entries for logged-in user, posted by Bartjan Wattel on Wed Jun 30 11:59:57 2004  Hi, Is it possible to restrict the display of logbook entries to the entries        Re: Only show log entries for logged-in user, posted by Ralph Kuehn on Wed Jun 30 14:59:06 2004  One way would be to create a seperate logbook for each student including the teacher. It should then be fairly simple to set up the permissions however you would like. For a large class it might be a bit cumbersome to set it up this way.          Re: Only show log entries for logged-in user, posted by Stefan Ritt on Wed Jul 7 16:43:52 2004  > For a large class it might be a bit cumbersome to set it up this way. What you can do is put most of the configuration options into the [global] section,   Using date and subst date, posted by nait tauh on Fri May 14 06:19:40 2004  I'm trying capture any edit/modified entry with the following, Using the real date format instead of text string so that I could do a quick filter on it.       Re: Using date and subst date, posted by Stefan Ritt on Fri May 21 15:03:48 2004  > I'm trying capture any edit/modified entry with the following, Using the > real date format instead of text string so that I could do a quick filter on it. >           Re: Using date and subst date, posted by nait tauh on Sat May 29 04:23:58 2004  > I fixed that problem, new version under > http://midas.psi.ch/cgi-bin/cvsweb/elog/src/elogd.c?rev=1.328             Re: Using date and subst date, posted by Stefan Ritt on Wed Jun 2 15:13:12 2004  >  > > I fixed that problem, new version under > > http://midas.psi.ch/cgi-bin/cvsweb/elog/src/elogd.c?rev=1.328                Re: Using date and subst date, posted by nait tauh on Thu Jun 3 17:15:56 2004  > http://midas.psi.ch/elog/download/windows/elogd-snapshot.exe >  > is for windows, for linux you have to recompile with                   Re: Using date and subst date, posted by Stefan Ritt on Thu Jun 3 17:28:07 2004  > > http://midas.psi.ch/elog/download/windows/elogd-snapshot.exe > >  > > is for windows, for linux you have to recompile with                      Re: Using date and subst date, posted by nait tauh on Thu Jun 3 18:28:02 2004  > Looks like a weird Linux installation. Maybe try to link static: >                          Re: Using date and subst date, posted by Stefan Ritt on Thu Jun 3 20:22:47 2004  > Now I have more error. ;( >  > Maybe you can post your elogd build.... just for me. :)                            Re: Using date and subst date, posted by nait tauh on Fri Jun 4 16:43:34 2004  > I compiled one (just for you :))), available at >  > http://midas.psi.ch/elog/download/tar/elogd-snapshot.gz                               Re: Using date and subst date, posted by nait tauh on Wed Jun 16 10:47:26 2004  >  > Thank you very much.... it work.   > nait.                                  Re: Using date and subst date, posted by Stefan Ritt on Wed Jun 16 14:42:07 2004  > It has a bug. The filter will fail on the initial page of the logbook.  >  > example,                                     Re: Using date and subst date, posted by nait tauh on Wed Jun 16 15:57:02 2004  >  > You should, it has been fixed in 2.5.3 :-)))   Mail notification without attachment possible?, posted by nait tauh on Sat May 29 04:28:38 2004  I just noticed the problem of mail notification with big attachments. For a files or photos exchange setup we could run into load and bandwidth problem quickly. Any way to restrict mail notification by attributes or without       Re: Mail notification without attachment possible?, posted by Stefan Ritt on Thu Jun 3 22:05:37 2004  > I just noticed the problem of mail notification with big attachments. For a > files or photos exchange setup we could run into load and bandwidth problem > quickly. Any way to restrict mail notification by attributes or without          Re: Mail notification without attachment possible?, posted by nait tauh on Wed Jun 16 10:34:04 2004  > Use >  > Email format = 6             Re: Mail notification without attachment possible?, posted by Stefan Ritt on Wed Jun 16 14:36:04 2004  > > Use > >  > > Email format = 6   Using select menu option to move multiple logbook entries to another logbook, posted by Robin Peterson on Fri Jun 4 22:40:44 2004  I'm trying to configure this thing to be able to filter on a set of  criteria, choose select, choose toggle all, and then choose "Move to  Complete Work Requests".       Re: Using select menu option to move multiple logbook entries to another logbook, posted by Stefan Ritt on Mon Jun 7 15:58:10 2004  > I've been able to select a specific logbook entry and move it, and I've  > been able to filter and select and toggle, but I can't figure out how to  > get the Move To option to show up on the main logbook menu....   Resubmit as new entry, posted by miljan dedic on Thu Jun 3 22:22:33 2004  Hello, Elogd crashing when "Resubmit as new entry" is executed. Tried with demo config, same result, also tried with snapshot version.       Re: Resubmit as new entry, posted by Stefan Ritt on Fri Jun 4 16:55:36 2004  > Elogd crashing when "Resubmit as new entry" is executed. > Tried with demo config, same result, also tried with snapshot version. > After the first crash i restart elogd, then it crashes every time i enter    Extendable options, posted by Marc Neiger on Mon May 10 00:00:06 2004  Hi, the use of extendable options in the global section seem to "crash" elogd        Re: Extendable options, posted by Stefan Ritt on Mon May 10 21:57:49 2004  > the use of extendable options in the global section seem to "crash" elogd  > when creating a new entry. > My elogd.cfg is included          Re: Extendable options, posted by Marc Neiger on Tue May 11 10:42:44 2004  Hi Stefan, Many thanks, it works. I'm impressed by your reactivity ! thanks again.             Re: Extendable options, posted by Stefan Ritt on Tue May 11 10:44:55 2004  > Is it possible to have a conditionnal attribute depend on an extendanble one ? In principle yes, but I never tried it...                Re: Extendable options, posted by Marc Neiger on Tue May 11 11:08:33 2004  > > Is it possible to have a conditionnal attribute depend on an extendanble one ? >  > In principle yes, but I never tried it...                   Re: Extendable options, posted by Stefan Ritt on Tue May 11 11:18:24 2004  > The snapshot version you sent me seems to be locked onto port 80 and does not honor  > the port directive in elog.cfg....                      Re: Extendable options, posted by Marc Neiger on Tue May 11 19:35:11 2004  > > The snapshot version you sent me seems to be locked onto port 80 and does not honor  > > the port directive in elog.cfg.... >    safari browser issue, posted by damon nettles on Thu Apr 1 19:38:56 2004  we've experienced a problem when using the safari browser to do a search in our elog. whenever you do a search, the logbook returns an error and the elog deamon crashes. when we first experienced this problem we were running       Re: safari browser issue, posted by Stefan Ritt on Wed May 5 17:38:12 2004  > we've experienced a problem when using the safari browser to do a search in > our elog. whenever you do a search, the logbook returns an error and the > elog deamon crashes. when we first experienced this problem we were running   CSV importing, posted by Paul Harrington on Fri Apr 23 11:50:07 2004  I have been importing data from a CSV file into elog which has worked. However I'd like to import data from the CSV file, directly to the 'text'        Re: CSV importing, posted by Stefan Ritt on Fri Apr 23 13:47:40 2004  > However I'd like to import data from the CSV file, directly to the 'text'  > field, rather than just to one an attribute fields. Is it possible to do  > this?          Re: CSV importing, posted by Paul Harrington on Fri Apr 30 12:58:54 2004  > > However I'd like to import data from the CSV file, directly to the 'text'  > > field, rather than just to one an attribute fields. Is it possible to do  > > this?             Re: CSV importing, posted by Stefan Ritt on Sat May 1 00:21:20 2004  I implemented the feature to import the main entry text body from a CSV column labeled "text". Please see the newest release (http://midas.psi.ch/cgi-bin/cvsweb/elog/src/elogd.c?rev=1.319) and let me know if this   Global password file together with guest account, posted by Bertram Metz on Thu Apr 8 15:05:43 2004  Hello, is it possible to have an guest account together with a global password file?       Re: Global password file together with guest account, posted by Stefan Ritt on Thu Apr 8 15:24:02 2004  > Hello, >  > is it possible to have an guest account together with a global password file?          Re: Global password file together with guest account, posted by Bertram Metz on Thu Apr 8 15:42:52 2004  > > Hello, > >  > > is it possible to have an guest account together with a global password file?             Re: Global password file together with guest account, posted by Stefan Ritt on Thu Apr 8 16:23:00 2004  > Yes, that is what I want. I implemented a switch "protect selection page" in revision 1.318, which can be                Re: Global password file together with guest account, posted by Bertram Metz on Tue Apr 13 11:13:53 2004  > > Yes, that is what I want. >  > I implemented a switch "protect selection page" in revision 1.318, which can be   Using Javascript files , posted by Robin Peterson on Wed Mar 31 04:22:57 2004  I develop multiple client server apps and web apps deployed on intranets. I need my users to send me bugs with screenshots attached.       Re: Using Javascript files , posted by Stefan Ritt on Mon Apr 5 09:28:19 2004  > I develop multiple client server apps and web apps deployed on intranets. I > need my users to send me bugs with screenshots attached.   "Upgrading" from 1.35 to 2.52 fails, posted by PJ Meyer on Thu Apr 1 20:21:26 2004  Have a working copy of 1.35 running on NT4 server. Went to upgrade to latest version. Stopped service, installed the 2.52 version, restarted service and when        Re: "Upgrading" from 1.35 to 2.52 fails, posted by PJ Meyer on Fri Apr 2 02:41:36 2004  tuens out that the first log file was causing the problem. Elconv would just hang  on trying to convert it. renamed it, reran elconv, reload service and 2.51 elogd  and all was working as it should.   Elog Utility, posted by Charles Duncan on Wed Mar 24 17:48:28 2004  I am trying to use the Elog Utility to import a few thousand entries. So  far I have run into a few problems.       Re: Elog Utility, posted by Charles Duncan on Thu Mar 25 18:20:15 2004  > I am trying to use the Elog Utility to import a few thousand entries. So  > far I have run into a few problems. >           Re: Elog Utility, posted by Stefan Ritt on Fri Mar 26 09:37:08 2004  > a) Cannot get elog utility to speak to elogd on port 8080. Even though I  > use the -p 8080 option with elog. I was able to get it to work when I  > moved my server to port 80.             Re: Elog Utility, posted by Charles Duncan on Sat Mar 27 18:52:16 2004  > > a) Cannot get elog utility to speak to elogd on port 8080. Even though I  > > use the -p 8080 option with elog. I was able to get it to work when I  > > moved my server to port 80.                Re: Elog Utility, posted by Stefan Ritt on Sun Mar 28 12:45:45 2004  > The only part that does not work is -l "Log Book" the -l variable has to stay as  > one word. If I submit 2 words (in quotes) it only looks for a logbook of the first  > word and fails.   Quick search mode with Mozilla based browsers, extremely useful!!!, posted by Stefan Ritt on Wed Mar 24 21:25:34 2004  It is not usual for me to pester people with tips around elog, but this one was so helpful for me that I would like to share it.   Suggestions for developing new CSS files, posted by Stefan Ritt on Wed Mar 24 20:23:47 2004  The elog daemon uses cascading style sheets (CSS) to format its output, such as font family, size and color. Some people started to develop new themes (skins) and posted them at the contributions logbook (such as   System Error / Hangs with ELPG and threaded Msg's under Win 2k3 Server, posted by Ulrich Trüssel on Sat Feb 28 16:46:41 2004  Since I'n not a programmer I's like to be very carefulls with bug   reports, but after testing for a while, I belive this my be a bug or   something else:         Re: System Error / Hangs with ELPG and threaded Msg's under Win 2k3 Server, posted by Stefan Ritt on Mon Mar 1 08:26:32 2004  All I can offer is send me your config file for the problematic logbook, and  I will try to reproduce the error.          Re: System Error / Hangs with ELPG and threaded Msg's under Win 2k3 Server, posted by Ulrich Trüssel on Mon Mar 1 18:04:08 2004  hello stefan    sorry for the delay, was out of the office today. i had tested the same config              Re: System Error / Hangs with ELPG and threaded Msg's under Win 2k3 Server, posted by Stefan Ritt on Tue Mar 2 09:29:38 2004  > the problem only ocures on win 2003 server. I d'dn't test it under xp, 2000,  > 2002 beause i don't have any of this systems. but it looks that no one else  > has this problem. would be helpfull to know if there anybody out in                 Re: System Error / Hangs with ELPG and threaded Msg's under Win 2k3 Server, posted by Ulrich Trüssel on Tue Mar 2 12:23:09 2004  > I agree. It's most probably a stack overflow problem. The stack size must be  less   > on a win 2003 server compared to a xp machine. I know that the threaded display                     Re: System Error / Hangs with ELPG and threaded Msg's under Win 2k3 Server, posted by Stefan Ritt on Fri Mar 5 21:44:28 2004  > since the new server isn't standing here in my office i can not test if older elog  > versions don't have the problem too. but if your idea of stack or buffer overflow  > is right, i guess that hoping of the helpfull ms pach or a update of the compiler                       Re: System Error / Hangs with ELOG and threaded Msg's under Win 2k3 Server, posted by Ulrich Trüssel on Sat Mar 6 14:25:17 2004  > > since the new server isn't standing here in my office i can not test if older elog   > > versions don't have the problem too. but if your idea of stack or buffer overflow   > > is right, i guess that hoping of the helpfull ms pach or a update of the compiler                           Re: System Error / Hangs with ELOG and threaded Msg's under Win 2k3 Server, posted by Raj on Wed Mar 10 06:56:19 2004  Run into the same error on a windows XP & 2000 machine. Totally shuts down the elogd.exe  when THREADED is selected. Have not tried your modified version after reading the posted  results. Will run with summary view until fixed. Wish I could help but I'm not a                             Re: System Error / Hangs with ELOG and threaded Msg's under Win 2k3 Server, posted by Stefan Ritt on Tue Mar 16 09:50:58 2004  > Run into the same error on a windows XP & 2000 machine. Totally shuts down the elogd.exe  > when THREADED is selected. Have not tried your modified version after reading the posted  > results. Will run with summary view until fixed. Wish I could help but I'm not a                                Re: System Error / Hangs with ELOG and threaded Msg's under Win 2k3 Server, posted by Ulrich Trüssel on Tue Mar 16 20:27:56 2004  Many Thank's to Stefan for his work!!! He's doing a great job and is offering a better  service than most comercial programs! Thank you very much Stefan!!!      Elog as a service, posted by Torsten Hinsche on Mon Mar 8 16:55:21 2004  Is there any possibility to start elogd as a service under NT/2000/XP  having local service as its user? Yes, I've read the documentation. Maybe  things have changed.       Re: Elog as a service, posted by Stefan Ritt on Mon Mar 8 17:24:14 2004  > Is there any possibility to start elogd as a service under NT/2000/XP  > having local service as its user? Yes, I've read the documentation. Maybe  > things have changed.   Type date and conditional attributes, posted by Ralph Bearpark on Fri Mar 5 15:34:30 2004  BUG#1 Given:       Re: Type date and conditional attributes, posted by Stefan Ritt on Sat Mar 6 12:47:34 2004  > BUG#1 Has been fixed. New version under CVS.          Re: Type date and conditional attributes, posted by Ralph Bearpark on Mon Mar 8 09:52:14 2004  > > BUG#1 >  > Has been fixed. New version under CVS.   Instant Edit Link, posted by Raj on Fri Feb 27 03:48:05 2004  How I can dynamically create a link when a new submission is entered that  will have a value of <ELOG_URL$message id?=Edit> I want the users to be able to go straight from the main page to an edit        Re: Instant Edit Link, posted by Stefan Ritt on Fri Feb 27 09:15:07 2004  I have added that functionality according to your request. In elogd.cfg, you  can specify          Re: Instant Edit Link, posted by Raj on Sun Feb 29 18:31:47 2004  I have done all that you suggested and all I get is the Message ID # that takes  me to the message. I even upgraded to the 2.5.1 version. Then I placed the elogd.c in the SRC              Re: Instant Edit Link, posted by Stefan Ritt on Mon Mar 1 08:29:19 2004  > I even upgraded to the 2.5.1 version. Then I placed the elogd.c in the SRC  > folder. Also placed the images in the themes folder.                Re: Instant Edit Link, posted by Raj on Fri Mar 5 17:26:29 2004  I must have misunderstood what you meant. That aside, I don't know how to compile  the elogd.c so any help would be appreciated. I would like to learn how to also. Thanks.   top text/bottom text, posted by Val Schmidt on Mon Mar 1 16:49:34 2004  Hello, I have a quick question regarding how to display text using the "Top text"        Re: top text/bottom text, posted by Stefan Ritt on Mon Mar 1 16:58:36 2004  This was a bug which only occurs under certain conditions, that's why nobody  has seen it yet. I fixed it, the new version is available under CVS:          Re: top text/bottom text, posted by Val Schmidt on Mon Mar 1 17:26:34 2004  > This was a bug which only occurs under certain conditions, that's why nobody  > has seen it yet. I fixed it, the new version is available under CVS: >    Default Sorting Option, posted by Ulrich Trüssel on Fri Feb 27 10:09:04 2004  I really don't know if anybody already had this problem or i just didn't  find the solution in the documenttaion:          Re: Default Sorting Option, posted by Stefan Ritt on Fri Feb 27 10:28:00 2004  This can be easily achieved with the configuration option Start page = ?sort=<attribute>          Re: Default Sorting Option, posted by Ulrich Trüssel on Fri Feb 27 13:25:32 2004  Thank's!!!  :-))    Great solution. Exactly what I need!    -W -Wall options (using gcc), posted by Heiko Scheit on Fri Feb 13 12:25:15 2004  Maybe consider using the options -W -Wall when compiling elogd. There are several warning messages.       Re: -W -Wall options (using gcc), posted by Stefan Ritt on Fri Feb 13 21:52:48 2004  Thanks, I did so.          Re: -W -Wall options (using gcc), posted by Stefan Ritt on Mon Feb 16 16:07:34 2004  So I fixed all compiler generated warnigns except these: [midas@pc2075 ~/elog]$ gcc -g -O -W -Wall -o elogd src/elogd.c             Re: -W -Wall options (using gcc), posted by Heiko Scheit on Mon Feb 16 16:40:50 2004  > So I fixed all compiler generated warnigns except these: >  > [midas@pc2075 ~/elog]$ gcc -g -O -W -Wall -o elogd src/elogd.c                Re: -W -Wall options (using gcc), posted by Stefan Ritt on Mon Feb 16 16:47:55 2004  > Have a look at the gcc info pages: >  > $ info gcc "invoking gcc" "warning options"                   Re: -W -Wall options (using gcc), posted by Heiko Scheit on Mon Feb 16 17:18:39 2004  > > Have a look at the gcc info pages: > >  > > $ info gcc "invoking gcc" "warning options"   elog (not elogd) submit does not work anymore, posted by Heiko Scheit on Fri Feb 13 12:21:25 2004  Somehow elog does not use the -s option (subdir) anymore, resulting in a 'HTTP/1.1 404 Not Found' error.       Re: elog (not elogd) submit does not work anymore, posted by Stefan Ritt on Fri Feb 13 21:59:44 2004  Oops! I 're-used' the '-s' flag for email suppression, so it was actually  double used. I changed the email supprssion flag to '-p', so '-s' should  work again for specifying subdirectories.   Behaviour of text when using quote marks in header fields , posted by Fergus Lynch on Wed Feb 11 15:06:38 2004  Hi, First off let me say what an excellent program, simple yet powerful...       Re: Behaviour of text when using "quote marks" in header fields , posted by Stefan Ritt on Fri Feb 13 21:34:57 2004  Like this one ^^^ ??? I'm joking! I fixed the bug and updated the elogd server. Please find the new           Re: Behaviour of text when using "quote marks" in header fields , posted by Fergus Lynch on Fri Feb 13 21:50:59 2004  > Like this one ^^^ ??? >  > I'm joking! I fixed the bug and updated the elogd server. Please find the new    segmentation fault, posted by Heiko Scheit on Fri Feb 13 12:18:19 2004  Around line 2240 (in loc()) in elogd.c the following is written,  which results in an infinite loop, since loc() recursively with       Re: segmentation fault, posted by Stefan Ritt on Fri Feb 13 21:50:09 2004  This problem has been fixed recently. The new code is    /* special case: "Change %s" */   Javascript for Bookmark Link for one-click submission to elog, posted by Fred Hooper on Sat Jan 31 09:33:35 2004  I have created a javascript to be used as a browser link that allows a one step cut and paste from a web browser into a elog logbook.        Re: Javascript for Bookmark Link for one-click submission to elog, posted by Stefan Ritt on Wed Feb 4 12:00:14 2004  I find this script very nice. Indeed JavaScript can be very powerful to do such  things. I added some JavaScript support to the elogd server itself. If one opens  the "New" page like   New major ELOG version 2.5.0 released, posted by Stefan Ritt on Thu Jan 29 10:14:13 2004  Version 2.5.0 of ELOG has been released yesterday. The main new feature is  the automatic mirroring of logbooks between different elog servers.    Strange timezone in email sent with Postfix, posted by Joseph Giaime on Thu Jan 29 00:24:44 2004  Hi all, I'm having trouble getting a sensible timezone to be attached to e-mail that gets sent out when messages are posted.  I'm using Postfix, not sendmail (Mac OS X Server uses this beginning with version 10.3).  In this set-up, the 'sendmail' program is a front-end for Postfix, not the real thing.  I suspect       Re: Strange timezone in email sent with Postfix, posted by Stefan Ritt on Thu Jan 29 09:25:45 2004  > Instead of something like "Date: Wed, 28 Jan 2004 14:46:16 -0600", the > "-0600" is replaced by a large number that doesn't correspond with anything > I can figure out.  This is the sort of thing that does no real harm, but the   whishlist direct shortcut to select a files or folder (not http), posted by Etienne Van Caillie on Wed Dec 3 06:32:09 2003  whishlist an entry like       Re: whishlist direct shortcut to select a files or folder (not http), posted by Stefan Ritt on Wed Dec 3 09:18:25 2003  > an entry like > file:///E:/Dossier\!!shorcut > will open IE with these current adresse          Re: whishlist direct shortcut to select a files or folder (not http), posted by Etienne Van Caillie on Wed Dec 3 14:57:05 2003  > > an entry like > > file:///E:/Dossier\!!shorcut > > will open IE with these current adresse   speed is very slow if logbook contains many entries, posted by Heiko Scheit on Wed Nov 12 12:25:44 2003  This is not really a bug, but elogd was getting really slow with our logbook.  It took about 4 1/2 seconds just to get the default page in threaded mode with 15 entries.  The logbook has in total about 2000       Re: speed is very slow if logbook contains many entries, posted by Stefan Ritt on Wed Nov 12 12:34:02 2003  This is a very nice measurement you made and helps me a lot. I will  incorporte your suggestions into the next version. Under Windows however,  there is no -HUP signal, so that won't work for them. But what I can easily           Re: speed is very slow if logbook contains many entries, posted by Stefan Ritt on Thu Nov 20 17:55:57 2003  I implemented the new scheme where  - under Windows, the configuration is only checked once every access             Re: speed is very slow if logbook contains many entries, posted by Etienne Van Caillie on Mon Nov 24 10:25:10 2003  > I implemented the new scheme where  >  > - under Windows, the configuration is only checked once every access   Elogd.exe Crashes When There are too Many Replies to Replies..., posted by Christopher Jones on Sun Oct 12 08:37:00 2003  Hi,   We have been using Elog successfully as a shiftlog book for over a month        Re: Elogd.exe Crashes When There are too Many Replies to Replies..., posted by Stefan Ritt on Sun Oct 26 17:04:59 2003  >   We have been using Elog successfully as a shiftlog book for over a month  > now, but I recently ran into an annoying bug, I think. >   We had a thread that was created and was being replied to over several           Re: Elogd.exe Crashes When There are too Many Replies to Replies..., posted by Stefan Ritt on Tue Nov 11 13:49:50 2003  I found a stack overflow if there are too many replies. This has been fixed in  the current CVS verson of elogd.c and will be incorporated into the next release.             Re: Elogd.exe Crashes When There are too Many Replies to Replies..., posted by Christopher Jones on Fri Nov 21 07:59:50 2003  > I found a stack overflow if there are too many replies. This has been fixed in  > the current CVS verson of elogd.c and will be incorporated into the next release.   Update request for Admin Guide, posted by Justin Dieters on Tue Nov 18 23:19:57 2003  Heya, I've been using elog for a year or so, with a proxy through Apache, but recently I've ran into some trouble with my Apache config, where spammers were using my incorrectly configured proxy to send spam.       Re: Update request for Admin Guide, posted by Stefan Ritt on Thu Nov 20 17:51:53 2003  Thanks, I added a note into the admin guide.   elog.exe , posted by Etienne Van Caillie on Wed Nov 12 07:52:45 2003  impossible to create the moptions with  -a Type#0="%D1%"       Re: elog.exe , posted by Stefan Ritt on Wed Nov 19 09:06:11 2003  > impossible to create the moptions with  >  > -a Type#0="%D1%"   FreeBSD Install, posted by Jason on Sun Sep 21 09:33:46 2003  I am getting the following errors when trying to install elog-2.3.9 on my FreeBSD box. I am running FreeBSD 4.5-RELEASE.       Re: FreeBSD Install, posted by Stefan Ritt on Sun Sep 21 09:53:56 2003  Unfortunately I don't have access to a FreeBSD box so I cannot try. But I  thought the GNU make is the same on Linux and FreeBSD???        Re: FreeBSD Install, posted by G on Tue Sep 23 01:10:17 2003  I got elog 2.3.9 running on FreeBSD 5.1 successfully, I compiled elog on a redhat box and then just copied over all the files to  the FreeBSD box and ELOG just ran with no issues.          Re: FreeBSD Install, posted by Dave Truesdell on Sun Oct 26 18:32:17 2003  > I got elog 2.3.9 running on FreeBSD 5.1 successfully, > I compiled elog on a redhat box and then just copied over all the files to  > the FreeBSD box and ELOG just ran with no issues.             Re: FreeBSD Install, posted by G on Tue Oct 28 22:40:28 2003  Thanks for that mate, compiled elog on FreeBSD 5.1 myself no problems just like  you said, great!   Groups on the first page, posted by Robert Keeney on Thu Oct 23 13:59:54 2003  I would very much like to list groups instead of the individual logs on the firs page you see after login.       Re: Groups on the first page, posted by Stefan Ritt on Thu Oct 23 20:40:11 2003  > I would very much like to list groups instead of the individual logs on the > firs page you see after login. >           Re: Groups on the first page, posted by Robert Keeney on Fri Oct 24 14:08:47 2003  I think I would like: Only groups. When you click on a group, a secondary page shows up showing logs in that group.              Re: Groups on the first page, posted by Stefan Ritt on Fri Oct 24 17:02:06 2003  > I think I would like: Only groups. When you click on a group, a secondary page > shows up showing logs in that group.  >                 Re: Groups on the first page, posted by Robert Keeney on Fri Oct 24 21:02:54 2003  OK, I'm willing to give a shot but I don't know how to do it. I'll look in the docs and see if I can figure it out.  Thanks.                     Re: Groups on the first page, posted by Robert Keeney on Fri Oct 24 21:22:11 2003  I don't see anyway to define a log as an attribute. May be I just don't understand something. I have more than 50 logs anyway.                      Re: Groups on the first page, posted by Stefan Ritt on Sat Oct 25 10:01:14 2003  > I don't see anyway to define a log as an attribute. May be I just don't understand > something. I have more than 50 logs anyway.   problems by defining the password file, posted by Marcel Pils on Thu Aug 15 13:00:20 2002  i work on Windows2000 part of my elog.cfg:       Re: problems by defining the password file, posted by Marcel Pils on Thu Aug 15 18:00:36 2002  in Unix: i fixed the problem by defining a password file entry like 'user1::::'.  then i defined 'admin user = user1' in elogd.cfg.       Re: problems by defining the password file, posted by sridhar G on Mon Sep 29 15:30:16 2003  > i work on Windows2000 >  > part of my elog.cfg:   ELOG v2.3.9 CSS cross-reference (used for skins) , posted by R. Beekman on Wed Sep 17 16:06:09 2003  Contribution available for all who wants to make SKIN for ELOG! You are invited to benefit from this free info!   Version 2.3.9 released today, posted by Stefan Ritt on Tue Jul 15 14:46:50 2003  Version 2.3.9 of elog has been released today. Enhancements are: - Added options "Use Lock", "Title image"       Re: Version 2.3.9 released today, posted by nickc1 on Wed Jul 16 21:42:54 2003  Can you give a syntax example of the Logging Level option ?          Re: Version 2.3.9 released today, posted by Stefan Ritt on Thu Jul 17 10:46:29 2003  > Can you give a syntax example of the Logging Level option ? Please refer to the documentation (http://midas.psi.ch/elog/config.html), I just              Re: Version 2.3.9 released today, posted by nickc1 on Thu Jul 17 18:06:17 2003  Cheers It appears Im having problems getting this to work, my config is as follows, yet                 Re: Version 2.3.9 released today, posted by Stefan Ritt on Fri Jul 18 08:57:21 2003  > It appears Im having problems getting this to work, my config is as follows, yet  > its not updating the log file since i installed the new RPM 2.3.9, is there a  > problem or am I doing something wrong ?       Re: Version 2.3.9 released today, posted by Mike on Mon Sep 15 19:50:21 2003  > Version 2.3.9 of elog has been released today. Enhancements are: Forgive me if I've missed it, but I've looked in the forum, on-line cfg docs           Re: Version 2.3.9 released today, posted by Stefan Ritt on Tue Sep 16 12:48:56 2003  > Forgive me if I've missed it, but I've looked in the forum, on-line cfg docs  > and downloaded docs.  I cannot find details on how to the used  > the "Execute ..." command.  What is passed on command line, etc.   not proper HTML, posted by Heiko Scheit on Thu Jul 31 16:02:41 2003  I just upgraded from 2.3.5 to 2.3.9.       Re: not proper HTML, posted by Stefan Ritt on Mon Sep 8 11:32:42 2003  > There are some errors in the generated HTML.  Most of the time > the browser renders everything correctly but sometimes not.  Please > check especially (http://validator.w3.org/):   How to get a list of registered users assigned to an attribute?, posted by Kishore Masand on Thu Jul 31 06:39:40 2003  Hi, I am trying to create an issues logbook where I have defined an attribute        Re: How to get a list of registered users assigned to an attribute?, posted by Stefan Ritt on Fri Sep 5 17:30:07 2003  > I am trying to create an issues logbook where I have defined an attribute  > so I can track who this issue is assigned to. In order to get a drop-down  > list of users of the system to show up for that attribute (when creating a    problem with boolean attributes, posted by Heiko Scheit on Fri Aug 1 13:18:42 2003  Boolean attributes were not displayed correctly in version 2.3.9. Patch is attached.       Re: problem with boolean attributes, posted by Stefan Ritt on Fri Sep 5 17:19:11 2003  > Boolean attributes were not displayed correctly in version 2.3.9. > Patch is attached.   width of the textarea is too large (after reply), posted by Heiko Scheit on Mon Aug 4 14:02:52 2003  The width of the textarea after pressing reply is too large.  The problem is that the algorithm that searches for the longes line looks for the next '\r' which it does not find and therefore takes the       Re: width of the textarea is too large (after reply), posted by Stefan Ritt on Fri Sep 5 17:17:03 2003  > The width of the textarea after pressing reply is too large.  > The problem is that the algorithm that searches for the longes line > looks for the next '\r' which it does not find and therefore takes the   email Notification, posted by David on Thu Aug 7 15:21:40 2003  Good day! I´m a german guy so my english is not the best sorry for this...   I have my Elog completely configured now have I still another problem I  would like with a new entry a E-Mail address to select to be able itself        Re: email Notification, posted by Stefan Ritt on Fri Sep 5 17:13:07 2003  > Good day! I´m a german guy so my english is not the best sorry for this...   > I have my Elog completely configured now have I still another problem I  > would like with a new entry a E-Mail address to select to be able itself    Account expiration, posted by eric wooten on Wed Jul 30 08:13:56 2003  I know there's an item on the wishlist for password expiration, so how  about account expiration..?? (after so many days of inactivity).       Re: Account expiration, posted by Stefan Ritt on Fri Sep 5 17:10:43 2003  > I know there's an item on the wishlist for password expiration, so how  > about account expiration..?? (after so many days of inactivity).   using = or <> or AND as part of a filter ??, posted by eric wooten on Sat Jul 26 20:11:01 2003  Is this possible?  If so, could you provide an example: I'm trying to find a way that when you do a search, that you can filter        Re: using = or <> or AND as part of a filter ??, posted by Stefan Ritt on Sun Jul 27 16:09:09 2003  > Is this possible?  If so, could you provide an example: >  > I'm trying to find a way that when you do a search, that you can filter    Need fault-tolerance recommendations for using ELOG for Server Logs, posted by Shawn Larson on Fri Jul 25 23:56:12 2003     I would like to implement ELOG as a logbook for our Windows 2000  servers.  After making the recommendation, my supervisor replied:        Re: Need fault-tolerance recommendations for using ELOG for Server Logs, posted by Stefan Ritt on Sat Jul 26 10:29:33 2003  I was thinking since some time already about mirroring between elog servers,  and actually started already some implementation.   elog.exe cmd line - seems to just hang, posted by eric wooten on Fri Jul 25 02:02:48 2003  elog -h 192.168.0.25 -p 80 -l Database -a Type=test1 -a OS=W2K -a Loc=room1 -a Status=operational       Re: elog.exe cmd line - seems to just hang, posted by eric wooten on Fri Jul 25 02:03:37 2003  Note: When I hit ctrl-break, it exits to cmd prompt, and the entry appears  in the logbook.... ?       Re: elog.exe cmd line - seems to just hang, posted by eric wooten on Fri Jul 25 02:07:08 2003  opps nevermind, i didn't realize I had to put something in for the ending  body text.  Anyway to skip that part?          Re: elog.exe cmd line - seems to just hang, posted by Stefan Ritt on Fri Jul 25 08:51:22 2003  > opps nevermind, i didn't realize I had to put something in for the ending  > body text.  Anyway to skip that part? >    Bottom text = <file> not displayed in every screen?, posted by R. Beekman on Tue Jul 22 16:21:51 2003  I tried to add a file with the  "Bottom text = <file>" option. Although one would suggest that the bottom text file is included in every        Re: Bottom text = <file> not displayed in every screen?, posted by Stefan Ritt on Thu Jul 24 15:10:14 2003  > I tried to add a file with the  "Bottom text = <file>" option. >  > Although one would suggest that the bottom text file is included in every    Email Notification, posted by Robert Keeney on Mon Jun 30 14:15:52 2003  Is there a way to configure elog so users that have their email notification on only get notified for updates to logs they have access to? I've looked all through the documentation and I can't seem to find a way to do this.       Re: Email Notification, posted by Stefan Ritt on Mon Jun 30 17:07:03 2003  > Is there a way to configure elog so users that have their email notification > on only get notified for updates to logs they have access to? I've looked > all through the documentation and I can't seem to find a way to do this.          Re: Email Notification, posted by Robert Keeney on Mon Jun 30 20:29:43 2003  You guessed right. I give it a try soon as I get a chance. Thanks. > I guess you have a global password file and use "login user" statements for           Re: Email Notification, posted by Robert Keeney on Wed Jul 23 12:53:25 2003  I have had this installed for about two weeks now and it seems to be working fine. I haven't seen any problems at all and none of the other users have reported any.   Modify the date of an entry?, posted by Gary Cramblitt on Tue Jul 15 23:37:58 2003  Great program!  Thank you. Short of manually editing the logbook files, is there a way I can change the       Re: Modify the date of an entry?, posted by Stefan Ritt on Wed Jul 16 08:32:35 2003  > Short of manually editing the logbook files, is there a way I can change the > date of an entry?  I want to transfer my "Linux Journal", which I have been > writing as a regular document for several months, into elog so I can take          Re: Modify the date of an entry?, posted by Gary Cramblitt on Wed Jul 16 21:21:52 2003  > > Short of manually editing the logbook files, is there a way I can change the > > date of an entry?  I want to transfer my "Linux Journal", which I have been > > writing as a regular document for several months, into elog so I can take             Re: Modify the date of an entry?, posted by Gary Cramblitt on Wed Jul 16 21:31:26 2003  > > > Short of manually editing the logbook files, is there a way I can change the > > > date of an entry?  I want to transfer my "Linux Journal", which I have been > > > writing as a regular document for several months, into elog so I can take                Re: Modify the date of an entry?, posted by Stefan Ritt on Thu Jul 17 10:28:22 2003  > I figured out how to hide columns, using the "Display search" parameter.  (BTW, > suggest you modify the Administrator manual to mention that "Display search" applies >   to the initial display as well as any "Find"s.  I had seen this, but assumed it                   Re: Modify the date of an entry?, posted by Gary Cramblitt on Fri Jul 18 01:58:10 2003  > > I figured out how to hide columns, using the "Display search" parameter.  (BTW, > > suggest you modify the Administrator manual to mention that "Display search" applies > >   to the initial display as well as any "Find"s.  I had seen this, but assumed it   REQ: Preset attribute with current weeknumber. possible?, posted by R. Beekman on Tue Jul 15 12:21:27 2003  Is it possible to preset an attribute with the current weeknumber?       Re: REQ: Preset attribute with current weeknumber. possible?, posted by Stefan Ritt on Tue Jul 15 12:47:49 2003  > Is it possible to preset an attribute with the current weeknumber? No. All you can do is    Currently being edited option has gone, posted by nickc1 on Thu Jul 10 10:11:41 2003  In the current source which ive compiled and am using on our elog system,  the feature that you put in for me that says "Entry is currently being  edited by Joe Bloggs on 192.168.0.10" has vanished.       Re: Currently being edited option has gone, posted by Stefan Ritt on Thu Jul 10 13:02:53 2003  > In the current source which ive compiled and am using on our elog system,  > the feature that you put in for me that says "Entry is currently being  > edited by Joe Bloggs on 192.168.0.10" has vanished.          Re: Currently being edited option has gone, posted by nickc1 on Fri Jul 11 11:09:10 2003  Excellent thanks   HTML page formating, posted by Tomas Rudolf on Mon May 19 23:54:09 2003  Is there a possibility to integrate into ELOG some more features in terms  of page formating?       Re: HTML page formating, posted by Stefan Ritt on Wed Jun 4 15:52:52 2003  Thank you very much for your request, well motivated and described. I hope I  will soon find time to impelment this.       Re: HTML page formating, posted by Stefan Ritt on Fri Jul 4 20:46:16 2003  I implemented your request. The syntax is: Format <attribute> = <flags>,<css_class_name>,<css_class_value>,<width>,<size>          Re: HTML page formating, posted by Tomas Rudolf on Fri Jul 4 21:26:03 2003  Very interesting, indeed! Thank you very much for the implementation. I believe this is a big step ahead  in terms of ELOG screen formating (and therefore easier/more ergonomic    runtime error under Mac OS X 10.2, posted by Joseph Giaime on Mon Jun 30 00:11:09 2003  I have been trying to build and run elog under Mac OS  X 10.2.6, without sucess.  I  understand that this is not one of the 'supported' platforms, but I hope that there is someone    here who might know the work-around to my problem.       Re: runtime error under Mac OS X 10.2, posted by Sridhar Anandakrishnan on Mon Jun 30 02:12:24 2003  Joe, Run the command           Re: runtime error under Mac OS X 10.2, posted by Joseph Giaime on Mon Jun 30 05:15:14 2003  Sridhar & Recai, Thanks to both of you for the rapid and effective advice.  Fixing the limit corrected my problem.               Re: runtime error under Mac OS X 10.2, posted by Stefan Ritt on Mon Jun 30 17:16:56 2003  > I suppose that the advice to increase Mac OS X's default stacksize limit > might make a fine entry in the FAQ or README file.       Re: runtime error under Mac OS X 10.2, posted by Recai Oktas on Mon Jun 30 02:41:33 2003  Seems a stack problem.  I don't have an OS X box to validate my guess.  I've made a Google search with the keywords: EXC_BAD_ACCESS stack "os x"   Bug Found, posted by nickc1 on Mon Jun 16 17:44:49 2003  Ive just been alerted to a bug with email notifications in Elog. Basically if your log book contains a space then the URL that is sent in        Re: Bug Found, posted by Stefan Ritt on Tue Jun 17 12:52:34 2003  > Correct Way prior to 2.3.8 >  > http://192.168.0.1:99/Provisioning%20Request/35          Re: Bug Found, posted by nickc1 on Fri Jun 20 10:40:43 2003  > > Correct Way prior to 2.3.8 > >  > > http://192.168.0.1:99/Provisioning%20Request/35             Re: Bug Found, posted by Stefan Ritt on Mon Jun 23 10:53:55 2003  > Im using the plain RPM from 2.3.8, i uninstalled the 2.3.7 RPM before this  > upgrade, the only thing I kept was my own stylesheets and the config file. >    logboog for new project, posted by Etienne Van Caillie on Wed Jun 18 14:50:23 2003  we develop some improvement to elog and modify the C source to adapt some internal improvement.       Re: logboog for new project, posted by Stefan Ritt on Wed Jun 18 16:11:21 2003  > 1. shellonsubmit command : give the possibility to execute external  > program from elog by sending specific parameter (user/logbook/message ID) >           Re: logboog for new project, posted by Etienne Van Caillie on Thu Jun 19 13:45:09 2003  Tomas send you by mail the source files and documentation in English   syntax highligting for elog.cfg with ULTRAEDIT, posted by Etienne Van Caillie on Wed May 21 10:15:17 2003  UltraEdit Syntax coloring ========================= add this file in ultraedit       Re: syntax highligting for elog.cfg with ULTRAEDIT, posted by Stefan Ritt on Thu May 22 23:44:01 2003  > add this file in ultraedit > UltraEdit --> ADVANCED --> CONFIGURATION --> SYNTAX HIGHLIGHTING > I hope this will help you...          Re: syntax highligting for elog.cfg with ULTRAEDIT, posted by Etienne Van Caillie on Fri May 23 09:04:51 2003  > > add this file in ultraedit > > UltraEdit --> ADVANCED --> CONFIGURATION --> SYNTAX HIGHLIGHTING > > I hope this will help you...             Re: syntax highligting for elog.cfg with ULTRAEDIT, posted by Stefan Ritt on Wed Jun 4 15:24:42 2003  > i put the last version on this link > http://public.mba.be/download/u-edit-elog-syntax.txt                Re: syntax highligting for elog.cfg with ULTRAEDIT, posted by Etienne Van Caillie on Wed Jun 4 17:44:40 2003  > > i put the last version on this link > > http://public.mba.be/demo/elog/u-edit-elog-syntax.txt >    Loging user's activity, posted by Tomas Rudolf on Tue Jun 3 17:51:39 2003  I was wondering if there is a way to have a more detailed log of users'  activities? Current Logfile = <file> gives a good base for information about        Re: Loging user's activity, posted by Stefan Ritt on Wed Jun 4 15:30:12 2003  > I was wondering if there is a way to have a more detailed log of users'  > activities? > Current Logfile = <file> gives a good base for information about        Re: Display last page by default, posted by Yoshio Imai on Mon Oct 31 01:39:52 2005  I have installed the new version, and it works just fine. It is also MUCH faster than my intermediate solution. [quote] For the moment, I could satisfy the users by setting the start page to the "All" view   bug in cfg file, posted by Roberto Morelli on Thu May 22 21:36:54 2003  Hello Folks, Found an interesting problem with 2.3.7 under redhat 9.0 linux.       Re: bug in cfg file, posted by Etienne Van Caillie on Fri May 23 09:12:16 2003  > Hello Folks, >  > Found an interesting problem with 2.3.7 under redhat 9.0 linux.       Re: bug in cfg file, posted by Stefan Ritt on Tue Jun 3 20:49:27 2003  > When you take the elogd.cfg file and the menu commands = <list> and guest  > menu commands = <list>, the config menu for edit the elogd.cfg stops  > working, yet if I change the URL manually, I can still get to the file and        Re: bug in cfg file, posted by Stefan Ritt on Wed Jun 4 15:26:15 2003  > When you take the elogd.cfg file and the menu commands = <list> and guest  > menu commands = <list>, the config menu for edit the elogd.cfg stops  > working, yet if I change the URL manually, I can still get to the file and    Question, posted by nickc1 on Thu May 8 15:12:11 2003  Can you tell me what the following change in CVS offers Revision 1.99 / (download) - annotate - [select for diffs] , Fri May 2        Re: Question, posted by Stefan Ritt on Thu May 8 15:28:10 2003  > Can you tell me what the following change in CVS offers >  > Added lock icon for protected logbooks          Re: Question protection selection page command, posted by Etienne Van Caillie on Mon May 19 12:21:31 2003  > > Can you tell me what the following change in CVS offers > >  > > Added lock icon for protected logbooks             Re: Question protection selection page command, posted by Stefan Ritt on Wed Jun 4 15:00:33 2003  > could you add command for main menu guest user > Selection Page guest = ....   rhis logbook, posted by Etienne Van Caillie on Wed Jun 4 10:47:36 2003  I suggest to add an attributes  like  OS MOptions OS = linux, windows2000, windowsXP¨, windows2003       Re: rhis logbook, posted by Stefan Ritt on Wed Jun 4 11:14:32 2003  > I suggest to add an attributes  like  OS >  > MOptions OS = linux, windows2000, windowsXP¨, windows2003          Re: rhis logbook, posted by Etienne Van Caillie on Wed Jun 4 12:57:11 2003  > > I suggest to add an attributes  like  OS > >  > > MOptions OS = linux, windows2000, windowsXP¨, windows2003             Re: rhis logbook, posted by Stefan Ritt on Wed Jun 4 13:11:51 2003  > I suggest MOptions - people are lazy .... :) Not for the Version! I don't want to update this list on every release (:-(   Hosts deny, posted by Etienne Van Caillie on Fri May 30 08:04:23 2003  Used to deny a certain command to a list of users. This can be used to  deny a guest user to enter new messages or modify a message.        Re: Hosts deny, posted by Stefan Ritt on Tue Jun 3 20:08:27 2003  > Used to deny a certain command to a list of users. This can be used to  > deny a guest user to enter new messages or modify a message.  >    Simulation of a submit, posted by Tomas Rudolf on Fri May 2 18:50:48 2003  I have another tricky question. Is there a way to simulate an ELOG SUBMIT?       Re: Simulation of a submit, posted by Stefan Ritt on Fri May 2 20:10:48 2003  > Is there a way to simulate an ELOG SUBMIT? Have a look at the elog utility which comes in the package. It does exactly           Re: Simulation of a submit, posted by Tomas Rudolf on Sat May 3 11:00:34 2003  > > Is there a way to simulate an ELOG SUBMIT? >  > Have a look at the elog utility which comes in the package. It does exactly           Re: Simulation of a submit, posted by Tomas Rudolf on Sat May 17 05:55:53 2003  I guess this question got somehow lost. So once again : Is there a possibility to EDIT an existing message with  elog.exe ?             Re: Simulation of a submit, posted by Stefan Ritt on Wed May 28 08:30:18 2003  > I guess this question got somehow lost. > So once again : Is there a possibility to EDIT an existing message with  > elog.exe ?             Re: Simulation of a submit, posted by Stefan Ritt on Tue Jun 3 15:26:58 2003  > I guess this question got somehow lost. Got not lost, but I was on two consecutive conferences and just returned.   Possible Bug: 2.3.7 : Welcome Title = < img src=""> not working, posted by Fred Hooper on Mon May 19 19:14:35 2003  Just upgraded (using rpms) elogd from 2.3.5        Re: Possible Bug: 2.3.7 : Welcome Title = < img src=, posted by Stefan Ritt on Tue May 20 14:23:56 2003  > I noticed that my custom start page did not display the Welcome title icon. > It worked fine in prior elogs. >           Re: Possible Bug: 2.3.7 : Welcome Title = < img src=, posted by Fred Hooper on Tue May 20 19:09:26 2003  > > I noticed that my custom start page did not display the Welcome title icon. > > It worked fine in prior elogs. > >              Re: Possible Bug: 2.3.7 : Welcome Title = < img src=, posted by Stefan Ritt on Tue May 20 22:16:47 2003  > Now if you just port elog over to an apache and mysql enviroment, it would  > be perfect!    forum.css, posted by eric wooten on Fri May 16 00:55:20 2003  In the Config Examples logbook you mentioned a forum.css.  Do you have a  link to that css and others?       Re: forum.css, posted by Stefan Ritt on Fri May 16 08:34:44 2003  > In the Config Examples logbook you mentioned a forum.css.  Do you have a  > link to that css and others?   WIshlist Additional, posted by nickc1 on Wed May 14 18:18:05 2003  Is it possible to make the logbook summary screen sort differently   For example on a customer name field it displays as follows :-       Re: WIshlist Additional, posted by Stefan Ritt on Thu May 15 13:37:48 2003  > Is it possible to make the logbook summary screen sort differently I fixed that problem. The new version 2.3.7 released today contains the fix.   Feature request - fairly urgent also :), posted by nickc1 on Fri May 2 10:32:57 2003  We are using elog as a small database system, today we came across a  problem where 2 people were editing the same record and the first one to  submit his changes were overwritten when the second person submitted his.       Re: Feature request - fairly urgent also :), posted by Stefan Ritt on Fri May 2 10:39:51 2003  > We are using elog as a small database system, today we came across a  > problem where 2 people were editing the same record and the first one to  > submit his changes were overwritten when the second person submitted his.          Re: Feature request - fairly urgent also :), posted by nickc1 on Fri May 2 11:05:28 2003  > No, but I will put it on the wishlist. Anyhow it is hard to implement  > something like this. Assume that I would lock a page whenever it's edited  by        Re: Feature request - fairly urgent also :), posted by Stefan Ritt on Mon May 12 22:47:10 2003  > We are using elog as a small database system, today we came across a  > problem where 2 people were editing the same record and the first one to  > submit his changes were overwritten when the second person submitted his.          Re: Feature request - fairly urgent also :), posted by nickc1 on Wed May 14 18:18:31 2003  Thanks Ill grab it tomorrow and try it, when is the new version out btw ?             Re: Feature request - fairly urgent also :), posted by Stefan Ritt on Wed May 14 20:07:54 2003  > Thanks Ill grab it tomorrow and try it, >  > when is the new version out btw ?   "Selection page" parameter, posted by Tomas Rudolf on Thu May 8 16:49:05 2003  Hi,  I have a question concerning the "Selection page" ELOG.cfg parameter.       Re: , posted by Stefan Ritt on Thu May 8 22:22:24 2003  > I have a question concerning the "Selection page" ELOG.cfg parameter. > I was wondering if it is possible to specify a complete (absolute) URL  such           Re: , posted by Tomas Rudolf on Mon May 12 18:11:26 2003  > > I have a question concerning the "Selection page" ELOG.cfg parameter. > > I was wondering if it is possible to specify a complete (absolute) URL  > such    Use Email From = $user_email, posted by Etienne Van Caillie on Mon May 12 11:20:17 2003  if you put  Use Email From = $user_email       Re: Use Email From = $user_email, posted by Stefan Ritt on Mon May 12 16:01:38 2003  > if you put  >  > Use Email From = $user_email   A NAME=... tags around the attachments, posted by Thomas Salein on Wed May 7 15:20:46 2003  Hello Stefan, it would be useful, if the web server automatically produced tags <A NAME=       Re: A NAME=... tags around the attachments, posted by Stefan Ritt on Wed May 7 21:15:57 2003  > it would be useful, if the web server automatically produced tags <A NAME= > [AttachNo3]>Anhang 3</A> around the entry of the attachment. With this one  > could easily reference in the HTML text an attachement at the end of the    missing '.' in emails, posted by Heiko Scheit on Wed May 7 16:04:45 2003  missing '.' in emails -----------------------       Re: missing '.' in emails, posted by Stefan Ritt on Wed May 7 16:12:37 2003  >  > missing '.' in emails > -----------------------          Re: missing '.' in emails, posted by Stefan Ritt on Wed May 7 21:09:32 2003  > I checked my mail program and  > found out that it converts a single dot into two dots at the beginning  > of the line. I have to implement this in elgod.c.   "Number Attachments =" not being read after upgrade, posted by Kevin Ellwood on Wed May 7 16:54:26 2003  Hello I have upgraded elog from version 2.2.4 to 2.3.6 and then entry "Number       Re: , posted by Stefan Ritt on Wed May 7 16:58:34 2003  > I have upgraded elog from version 2.2.4 to 2.3.6 and then entry "Number > Attachments =" is not being read.  Looking at the changelog, I found that > "Number Attachments" has been removed in favor of "enable attachments".  I          Re: , posted by Kevin Ellwood on Wed May 7 17:27:51 2003  > > I have upgraded elog from version 2.2.4 to 2.3.6 and then entry "Number > > Attachments =" is not being read.  Looking at the changelog, I found that > > "Number Attachments" has been removed in favor of "enable attachments".  I   CVS URL, posted by nickc1 on Tue May 6 10:53:33 2003  Can anyone tell me the URL for the CVS download section the link has gone from one of the main screens       Re: CVS URL, posted by Stefan Ritt on Tue May 6 11:34:22 2003  > Can anyone tell me the URL for the CVS download section >  > the link has gone from one of the main screens   ELOG Skins Showcase, posted by Tomas Rudolf on Sat May 3 11:08:11 2003  Hello everybody. I am sure that some of you (just like me) experimented already with themes        Re: ELOG Skins Showcase, posted by Stefan Ritt on Sat May 3 15:06:16 2003  > Let's share some inspiration. I'll post mine as soon as finished the re- > look.   User Profile - Access to logbook group, posted by Tomas Rudolf on Fri May 2 00:34:26 2003  Hi, I was wondering if anyone had a solution for my problem.       Re: User Profile - Access to logbook group, posted by Stefan Ritt on Fri May 2 08:45:38 2003  > We would like to give access to selected users to only their Group. So that  > for instance Users1 cannot access the books of group Users3. I was  > wondering if there is any notion of "User profile" or security per logbook        Re: User Profile - Access to logbook group, posted by Robert Keeney on Fri May 2 15:58:23 2003  I have managed to get this to work (so far). What I do is use a separate password file and directory for each log.          Re: User Profile - Access to logbook group, posted by Tomas Rudolf on Fri May 2 18:10:36 2003  Robert, this is exactly what we managed to do as well. And it works fine.  The only issue is that the users from one group can "SEE" the book names  available to other groups.    Cookie problem using Apache 1.3.23 as Proxy, posted by Stefan Ritt on Thu May 1 10:27:17 2003  Today I found out that Apache 1.3.23 (and probably 1.3.24) has a problem  with ELOG if used as a proxy server. Due to a bug in Apache, only one  cookie is transmitted through the proxy at a time. This makes it impossible    problem with 20+ attachments, posted by Alexander ZVYAGIN on Tue Apr 22 17:17:36 2003  It seems that maximal number of attachments is about 20. When you try to add more, a new entry _is_ added to the logbook but the refernce to it is not added to the web page.       Re: problem with 20+ attachments, posted by Stefan Ritt on Tue Apr 22 17:21:36 2003  > It seems that maximal number of attachments is about 20. When you try to add > more, a new entry _is_ added to the logbook but the refernce to it is not > added to the web page.          Re: problem with 20+ attachments, posted by Alexander ZVYAGIN on Tue Apr 22 17:34:52 2003  > > It seems that maximal number of attachments is about 20. When you try to add > > more, a new entry _is_ added to the logbook but the refernce to it is not > > added to the web page.             Re: problem with 20+ attachments, posted by Stefan Ritt on Tue Apr 22 20:24:03 2003  > Actually my report was NOT about this limitation. You have it - it is fine. > The problem is that I add some 'zombies' or dead files to my logbook. >                 Re: problem with 20+ attachments, posted by Justin Dieters on Tue Apr 22 22:23:27 2003  I've been using elog for several months now, and one thing that's always seemed odd to me are the things like max number of attachments and max attachment size are defined right in the source code, and not in the config                   Re: problem with 20+ attachments, posted by Stefan Ritt on Wed Apr 23 08:46:14 2003  > I've been using elog for several months now, and one thing that's always > seemed odd to me are the things like max number of attachments and max > attachment size are defined right in the source code, and not in the config   Several Problems with 2.3.5, posted by Thomas Salein on Tue Apr 22 11:18:00 2003  We use ELOG 2.3.5 for Windows with a German language file and have found        Re: Several Problems with 2.3.5, posted by Stefan Ritt on Tue Apr 22 20:17:34 2003  > We use ELOG 2.3.5 for Windows with a German language file and have found  > some new problems: >   Converting logs, posted by Kutlay Topatan on Fri Apr 18 21:32:59 2003  I would like to dump mylog files into comma/tab seperated files. Is there  an easy way to do it?       Re: Converting logs, posted by Marcus Meyer on Tue Apr 22 19:27:28 2003  > I would like to dump mylog files into comma/tab seperated files. Is there  > an easy way to do it? >           Re: Converting logs, posted by Recai Oktas on Tue Apr 22 19:58:13 2003  > Here is the error: >  > Cannot find any ??????.log file in this directory.             Re: Converting logs, posted by Stefan Ritt on Tue Apr 22 20:06:51 2003  > `elconv' is just a simple tool to convert pre 2.0 log files to the current > format. (Well, after all these confusions, dropping it from the future > releases won't be surprising -at least for me- ;) You might try some   'Reply' removes attachments from the original message, posted by Alexander ZVYAGIN on Tue Apr 22 17:13:08 2003  It seems when I use "reply" with an attachments, the original attachments of the message are removed.       Re: 'Reply' removes attachments from the original message, posted by Stefan Ritt on Tue Apr 22 17:16:31 2003  > It seems when I use "reply" with an attachments, the original attachments of > the message are removed. >           Re: 'Reply' removes attachments from the original message, posted by Alexander ZVYAGIN on Tue Apr 22 17:20:19 2003  > > It seems when I use "reply" with an attachments, the original attachments of > > the message are removed. > >    Opera and IE behave different, posted by Thomas Salein on Tue Apr 22 11:29:44 2003  I repeat ... . Opera browser 7.03 simply crashes, when choosing the direct URL to our  logbook, i.e. http://localhost:8080/logbook2. We have set a general    Question, posted by nickc1 on Mon Apr 14 15:07:02 2003  Is there a way to hide logbooks from all views. Basically i want to use the move function to move old entries to another        Re: Question, posted by Stefan Ritt on Mon Apr 14 16:28:57 2003  > Is there a way to hide logbooks from all views. >  > Basically i want to use the move function to move old entries to another           Re: Question, posted by nickc1 on Tue Apr 15 12:17:12 2003  > > Is there a way to hide logbooks from all views. > >  > > Basically i want to use the move function to move old entries to another              Re: Question, posted by Stefan Ritt on Tue Apr 15 13:00:40 2003  > I tried that but on the summary screen it displays a list of all the  logbook  > regardless of group, also im not using public groups im using a seperate                 Re: Question, posted by nickc1 on Wed Apr 16 13:28:38 2003  > > I tried that but on the summary screen it displays a list of all the  > logbook  > > regardless of group, also im not using public groups im using a seperate                    Re: Question, posted by Stefan Ritt on Thu Apr 17 09:29:14 2003  > Yes thats wicked perfect, now im prob being thick but is there a way to  hide  > logbook tabs in the same way, as i dont really want to use groups as the                       Re: Question, posted by nickc1 on Sat Apr 19 11:09:33 2003  > > Yes thats wicked perfect, now im prob being thick but is there a way to  > hide  > > logbook tabs in the same way, as i dont really want to use groups as the    Disappearing attachments, posted by Greg Siems on Wed Apr 2 05:39:45 2003  Let me start by saying that I really like ELOG-- it's a nice tool. I'm trying out version 2.3.3. The problem that I'm having is with       Re: Disappearing attachments, posted by Stefan Ritt on Wed Apr 2 10:15:22 2003  > Let me start by saying that I really like ELOG-- it's a nice tool. >  > I'm trying out version 2.3.3. The problem that I'm having is with          Re: Disappearing attachments, posted by Justin Dieters on Sun Apr 13 14:32:52 2003  I am using 2.3.4 and I am still having this problem.  If someone posts a message with an attachment, and I then reply to that message, the attachment gets 'deattached' from that message.  However, the file is still in the             Re: Disappearing attachments, posted by Stefan Ritt on Mon Apr 14 11:04:52 2003  > I am using 2.3.4 and I am still having this problem.  If someone posts a > message with an attachment, and I then reply to that message, the attachment > gets 'deattached' from that message.  However, the file is still in the                Re: Disappearing attachments, posted by Stefan Ritt on Mon Apr 14 11:05:17 2003  > > I am using 2.3.4 and I am still having this problem.  If someone posts a > > message with an attachment, and I then reply to that message, the  attachment                Re: Disappearing attachments, posted by Justin Dieters on Mon Apr 14 18:24:18 2003  EDIT: I downloaded the latest elogd.c from CVS, replaced the one from the latest tar, and recompiled.  Worked great!   Bugs with 2.3.5, posted by nickc1 on Wed Apr 9 13:49:32 2003  Forgot password option generates an error message Password file hashes are different causing migrated password files to fail        Re: Bugs with 2.3.5, posted by Stefan Ritt on Wed Apr 9 13:58:59 2003  > Forgot password option generates an error message Which error? Can you be more specific. I tried it myself with this forum and           Re: Bugs with 2.3.5, posted by nickc1 on Wed Apr 9 15:50:38 2003  > > Forgot password option generates an error message >  > Which error? Can you be more specific. I tried it myself with this forum              Re: Bugs with 2.3.5, posted by Stefan Ritt on Wed Apr 9 16:06:31 2003  > Error sending Email  > Please use your browser's back button to go back     elogd under Apache, login screen always reappears, posted by Michael Doerner on Sat Apr 5 00:33:36 2003  Hi, I am new to elog so please bear with me if this sounds like a stupid       Re: elogd under Apache, login screen always reappears, posted by Stefan Ritt on Tue Apr 8 08:57:20 2003  > I would like to run elogd under Apache because I don't want to open another > port (eg. 8080) on the firewall for incoming http traffic. I followed the > special instructions for that sort of setup but the user logon screen always   Passwords might have changed for logbook "Forum", posted by Stefan Ritt on Mon Apr 7 23:00:48 2003  A problem (elog:272) with certain passwords has been fixed in version  2.3.5 of ELOG. This forum runs the updated version, which can cause login  problems. All users with a password length of 3,6,9,12,... characters    Password Problem, posted by Byron on Fri Apr 4 00:53:00 2003  I noticed that when I put in a password such as <test1> a person can login  with the password <test2> or any other number at the end.  Is the  encryption not able to tell the difference between numbers?  The encrypted        Re: Password Problem, posted by Stefan Ritt on Fri Apr 4 08:58:16 2003  > I noticed that when I put in a password such as <test1> a person can login  > with the password <test2> or any other number at the end.  Is the  > encryption not able to tell the difference between numbers?  The encrypted           Re: Password Problem, posted by Byron on Fri Apr 4 19:49:32 2003  > > I noticed that when I put in a password such as <test1> a person can  login  > > with the password <test2> or any other number at the end.  Is the              Re: Password Problem, posted by Stefan Ritt on Mon Apr 7 22:50:17 2003  > Ok, try it with the passwords <hello1> and <hello2>.  Then when you go to  log  > in, put in the password of <hello> with any single number after it and let    Login user problem, posted by Byron on Fri Apr 4 00:50:31 2003  When I use the <Login user => option to specify what users I want to be  able to login into the different logbooks it does not seem to work.  Is  there something else you are supposed to do to restrict what logbooks users        Re: Login user problem, posted by Stefan Ritt on Fri Apr 4 09:01:11 2003  > When I use the <Login user => option to specify what users I want to be  > able to login into the different logbooks it does not seem to work.  Is  > there something else you are supposed to do to restrict what logbooks users           Re: Login user problem, posted by Byron on Fri Apr 4 19:46:56 2003  > > When I use the <Login user => option to specify what users I want to be  > > able to login into the different logbooks it does not seem to work.  Is  > > there something else you are supposed to do to restrict what logbooks    Logbook Title bar , posted by nick on Wed Apr 2 16:36:18 2003  Is there a way to change the title entry for individual log books, and  forms ive completely rebranded our system but ut stil says ELOG ENTRIES on  the summary screen       Re: Logbook Title bar , posted by Stefan Ritt on Wed Apr 2 21:45:18 2003  > Is there a way to change the title entry for individual log books, and  > forms ive completely rebranded our system but ut stil says ELOG ENTRIES on  > the summary screen          Re: Logbook Title bar , posted by nick on Thu Apr 3 09:40:45 2003  > > Is there a way to change the title entry for individual log books, and  > > forms ive completely rebranded our system but ut stil says ELOG ENTRIES  on              Re: Logbook Title bar , posted by Stefan Ritt on Thu Apr 3 10:11:08 2003  > I need something to set the title of the page when on the summary page for  > the logbook, as it just says ELOG - Config DB (this isnt set anywhere)   Elog and SSL, posted by Recai Oktas on Sun Mar 16 19:15:16 2003  > Basically im running elog on a redhat 8 box with stunnel already installed  > as part of OpenSSL, on the server i ran the command specified in the  > instructions       Re: Elog and SSL, posted by Stefan Ritt on Fri Mar 21 16:24:05 2003  > I was wondering if you can help me understand the concept and if i am doing  > something wrong with securing Elog via SSL >           Re: Elog and SSL, posted by nick on Mon Mar 31 12:44:33 2003  Im not running anything on port 443, one thing I did notice is that when  stunnel is run and setup, I can run a netstat and nothing is bound to those  ports, if I do a ps -ef | grep stunnel nothing is running, yet it accepts the        Re: Re: Elog and SSL, posted by Recai Oktas on Fri Mar 21 16:52:12 2003  Ooops, I destroyed the original post, now how can we fix this :)   Elog 2.3.3, problems of 2.3.2 only partly solved, posted by djek on Thu Mar 20 21:07:09 2003  After upgrading from 2.3.1 to 2.3.3, elog is not able to load any resources as stylesheets, images or passwordfiles.       Re: Elog 2.3.3, problems of 2.3.2 only partly solved, posted by Stefan Ritt on Thu Mar 20 21:07:09 2003  > After upgrading from 2.3.1 to 2.3.3, elog is not able to load any resources > as stylesheets, images or passwordfiles. >           Re: Elog 2.3.3, problems of 2.3.2 solved, posted by djek on Thu Mar 20 21:07:09 2003  > > After upgrading from 2.3.1 to 2.3.3, elog is not able to load any resources > > as stylesheets, images or passwordfiles. > >    Problems with 2.3.2, posted by nick on Thu Mar 13 17:30:16 2003  Ive just installed the RPM of Elog 2.3.2 and ive found a bug relating to  port bindings, basically im running elog bound to port 81 and when i  install the new RPM it refuses to bind to this port, i tried port 8080 and        Re: Problems with 2.3.2, posted by Stefan Ritt on Thu Mar 13 17:33:58 2003  > Ive just installed the RPM of Elog 2.3.2 and ive found a bug relating to  > port bindings, basically im running elog bound to port 81 and when i  > install the new RPM it refuses to bind to this port, i tried port 8080 and           Re: Problems with 2.3.2, posted by Stefan Ritt on Fri Mar 14 10:30:25 2003  > > Ive just installed the RPM of Elog 2.3.2 and ive found a bug relating to  > > port bindings, basically im running elog bound to port 81 and when i  > > install the new RPM it refuses to bind to this port, i tried port 8080    Compile on AIX 5L, posted by Aamir Khan on Tue Mar 11 18:40:39 2003  Dear Friends, Anyone managed to compile elog on AIX 5.2 or 5.1 ... is there a binary    https:// changed to http:// when submit button is clicked, posted by Robert Keeney on Thu Mar 6 20:37:16 2003  I hope this is not something I did.  I'm using elog 2.3.1 on redhat 7.1 and using stunnel to redirect from port       Re: https:// changed to http:// when submit button is clicked, posted by Robert Keeney on Thu Mar 6 20:49:31 2003  > I hope this is not something I did.  >  > I'm using elog 2.3.1 on redhat 7.1 and using stunnel to redirect from port          Re: https:// changed to http:// when submit button is clicked, posted by Stefan Ritt on Fri Mar 7 09:39:45 2003  > > I'm using elog 2.3.1 on redhat 7.1 and using stunnel to redirect from port > > 443 to 8080. When I try to add a new record (click submit) https:// in the > > browser gets changed to http://. I ve tried three browsers all with the              Re: https:// changed to http:// when submit button is clicked, posted by Robert Keeney on Fri Mar 7 12:32:34 2003  Operator error. Figures! Elog has worked fine for a log time then I upgraded and added stunnel at the   elogd.cfg, posted by Aamir Khan on Tue Feb 25 22:35:44 2003  Stefan and friends, without breaching your own security, could it be possible to see what the        Re: elogd.cfg, posted by Stefan Ritt on Wed Feb 26 10:13:10 2003  > Stefan and friends, >  > without breaching your own security, could it be possible to see what the        Re: elogd.cfg, posted by Etienne Van Caillie on Thu Feb 27 10:53:09 2003  > Stefan and friends, >  > without breaching your own security, could it be possible to see what the    Security (passwords over web browser), posted by Aamir Khan on Tue Feb 25 22:18:57 2003  Stefan - Just to say that this is an excellent piece of work well done. I have just started an internal company Elog server, couple of        Re: Security (passwords over web browser), posted by Stefan Ritt on Wed Feb 26 10:34:12 2003  > Stefan - Just to say that this is an excellent piece of work well done. Thanks.   Email notification, posted by Tomas Rudolf on Wed Feb 19 13:28:17 2003  Hi Stefan, I have a question concerning the Email notification in ELOG.       Re: Email notification, posted by Stefan Ritt on Mon Feb 24 14:40:30 2003  This problem has been fixed as well (elog:233).   Themes BUG ?, posted by Tomas Rudolf on Mon Feb 24 09:23:39 2003  Hi, We prepared a customized theme to use with ELOG. It's called for example  my_theme and is situated in the THEMES directory (together with the DEFAULT        Re: Themes BUG ?, posted by Stefan Ritt on Mon Feb 24 13:22:06 2003  > Is the DEFAULT theme somehow hardcoded for the login screen and the main  > menu ?   ELOG source code from CVS, posted by Stefan Ritt on Mon Feb 24 13:20:19 2003  To obtain the newest source code of ELOG, go to the CVS repository at http://midas.psi.ch/cgi-bin/cvsweb/elog/src   Participation on development of ELOG, posted by Tomas Rudolf on Wed Feb 19 09:26:04 2003  Stefan,  We are interested in using your ELOG (which we consider to be a wonderful  application) even more. We would like to make a few adaptations in your        Re: Participation on development of ELOG, posted by Stefan Ritt on Wed Feb 19 09:37:30 2003  > We are interested in using your ELOG (which we consider to be a wonderful  > application) even more. We would like to make a few adaptations in your  > source code, above all to add some functionality that we are missing.          Re: Participation on development of ELOG, posted by Tomas Rudolf on Wed Feb 19 09:54:38 2003  > > We are interested in using your ELOG (which we consider to be a wonderful  > > application) even more. We would like to make a few adaptations in your  > > source code, above all to add some functionality that we are missing.          Re: Participation on development of ELOG, posted by Heiko Scheit on Wed Feb 19 14:48:56 2003  > > We are interested in using your ELOG (which we consider to be a wonderful  > > application) even more. We would like to make a few adaptations in your  > > source code, above all to add some functionality that we are missing.   Postdating the Entry Date, posted by Fred Hooper on Wed Feb 19 01:46:03 2003  Is is possible to postdate the Entry Date for an entry? The documentation lists the ability to forward date an entry, but I don't        Re: Postdating the Entry Date, posted by Stefan Ritt on Wed Feb 19 09:47:32 2003  > Is is possible to postdate the Entry Date for an entry? >  > The documentation lists the ability to forward date an entry, but I don't    New Version, posted by Nick on Tue Feb 18 08:07:10 2003  I noticed the site has been updated as far as the documentation for 2.3.1,  however the latest version in the downloads section is 2.3.0, any other  places where I can get 2.3.1       Re: New Version, posted by Stefan Ritt on Tue Feb 18 09:21:34 2003  > I noticed the site has been updated as far as the documentation for 2.3.1,  > however the latest version in the downloads section is 2.3.0, any other  > places where I can get 2.3.1   Lost features since upgrade to 2.3.0, posted by Nick on Fri Feb 7 18:38:56 2003  Ive got 2 issues which I cant see to resolve I was wondering if anyone can  help.       Re: Lost features since upgrade to 2.3.0, posted by Stefan Ritt on Fri Feb 7 19:52:41 2003  > Problem 1 - Since upgrading to version 2.3.0 I seem to have lost the some  > functionality explained below.  When i first log into my logbook (i only  > have a single one) it defaults to the summary view and the first field is           Re: Lost features since upgrade to 2.3.0, posted by Nick on Fri Feb 7 22:26:13 2003  > I revised the way links are placed into the summary table, so I could have  > lost some functionality (I did not try all config combinations since there  > are too many now). So I can fix your problem in two ways now: Either always              Re: Lost features since upgrade to 2.3.0, posted by Stefan Ritt on Tue Feb 11 09:03:18 2003  > Would be nice if you can specify which columns data has links as a flag or  > setting of some sorts, as opposed to either the first or all, but given a  > choice I would want the first column to be the linkable one                 Re: Lost features since upgrade to 2.3.0, posted by Nick on Tue Feb 11 11:17:29 2003  > > > > Problem 2 - no matter what i try in the config file i cannot get  elogd  > to                 Re: Lost features since upgrade to 2.3.0, posted by Kutlay Topatan on Wed Feb 12 19:10:26 2003  Stefan, When will you have 2.3.1 out? I just upgraded to 2.3.0 and would like to see                   Re: Lost features since upgrade to 2.3.0, posted by Stefan Ritt on Wed Feb 12 19:54:21 2003  > When will you have 2.3.1 out? I just upgraded to 2.3.0 and would like to  see > the links in my summary view. If it is going to be out soon I will wait   Find , posted by eric wooten on Mon Feb 10 23:36:31 2003  When you do a find in elog, records per page (some crazy large number - for  your forum logbook, display 57 entries seem to cause the problem, then  select last year (1 years worth of logs),(don't select printable)       Re: Find , posted by Stefan Ritt on Wed Feb 12 08:56:29 2003  > When you do a find in elog, records per page (some crazy large number - for  > your forum logbook, display 57 entries seem to cause the problem, then  > select last year (1 years worth of logs),(don't select printable)   Feature request, posted by Nick on Tue Feb 11 11:26:03 2003  Can you consider implementing the following additions to the functionality 1) Subt on edit <attribute> = xyz        Re: Feature request, posted by Stefan Ritt on Tue Feb 11 11:45:22 2003  > Can you consider implementing the following additions to the functionality >  > 1) Subt on edit <attribute> = xyz           Re: Feature request, posted by Nick on Wed Feb 12 01:11:08 2003  > > Can you consider implementing the following additions to the functionality > >  > > 1) Subt on edit <attribute> = xyz              Re: Feature request, posted by Stefan Ritt on Wed Feb 12 08:54:05 2003  > > > Can you consider implementing the following additions to the  functionality > > >    elog notification process causes the email to be truncated when going to Blackberry, posted by eric wooten on Mon Feb 10 23:05:36 2003  Hi Stefan, Many users have there email forward to Blackberry devices.  Although I        Re: elog notification process causes the email to be truncated when going to Blackberry, posted by eric wooten on Mon Feb 10 23:11:25 2003  Another Question:  Could ELOG be configured to send notifications as a Blind  Copy?  Just wondering if that would take care of the problem?          Re: elog notification process causes the email to be truncated when going to Blackberry, posted by eric wooten on Mon Feb 10 23:19:50 2003  I just noticed that the notifications I receive from your ELOG system,  doesn't show anyone in the "TO:" section but myself.  Or is ELOG configured  to only send myself a message?             Re: elog notification process causes the email to be truncated when going to Blackberry, posted by Stefan Ritt on Tue Feb 11 08:57:39 2003  > I just noticed that the notifications I receive from your ELOG system,  > doesn't show anyone in the "TO:" section but myself.  Or is ELOG  configured    Author attribute as a Quick Filter?, posted by eric wooten on Thu Feb 6 15:16:30 2003  When ELOG is configured for Self-Register=3, is it still possible to use the Author attribute as a Quick Filter?        Re: Author attribute as a Quick Filter?, posted by Stefan Ritt on Thu Feb 6 15:46:11 2003  > When ELOG is configured for Self-Register=3, is it still possible > to use the Author attribute as a Quick Filter?  >    Write only, posted by Matthew on Thu Jan 30 19:52:46 2003  I'm interested using elog for a lab notebook.  Once entries have been entered they cannot be changed/edited. Is it possible for elog to be setup to support something like this?  A write       Re: Write only, posted by Stefan Ritt on Fri Jan 31 09:49:43 2003  > I'm interested using elog for a lab notebook.  Once entries have been > entered they cannot be changed/edited. > Is it possible for elog to be setup to support something like this?  A write          Re: Write only, posted by Matthew on Fri Jan 31 20:47:51 2003  Does this truly disable the edit command or just hide it? > > I'm interested using elog for a lab notebook.  Once entries have been             Re: Write only, posted by Stefan Ritt on Fri Jan 31 21:09:47 2003  > Does this truly disable the edit command or just hide it? You're right! In some earlier versions, it did disable it, but in 2.2.5 it    confused name in the attributes section, posted by Etienne Van Caillie on Tue Jan 21 10:04:46 2003  do not use confused name in attributes ************************************** like       Re: confused name in the attributes section, posted by Stefan Ritt on Fri Jan 24 12:24:18 2003  > do not use confused name in attributes > ************************************** > like   call a shell from ELOG / new button [Submit & Notify], posted by Etienne Van Caillie on Sat Jan 11 19:44:29 2003  propose to put  [Submit] [Back] [Submit & Notify] button on top/bottom       Re: call a shell from ELOG / new button [Submit & Notify], posted by Stefan Ritt on Mon Jan 13 11:45:18 2003  I put this on the wish list. - Stefan   "User" and "Group" statements changed from Version 2.2.5, posted by Stefan Ritt on Tue Jan 7 17:49:40 2003  From Version 2.2.5 on, the configuration file entries User = ...       Re: 'group' option in conflict with 'guest logic' and 'LogBook Tabs' option , posted by Etienne Van Caillie on Sat Jan 11 19:26:24 2003  > From Version 2.2.5 on, the configuration file entries >  > User = ...          Re: 'group' option in conflict with 'guest logic' and 'LogBook Tabs' option , posted by Stefan Ritt on Mon Jan 13 11:43:37 2003  > small problem :  > **************** > Logbook Tabs = 0  in the guest logbook will close the group header   logbook db size causing very slow response, posted by eric wooten on Tue Dec 31 17:56:34 2002  Was wondering if there were any tweaks/suggestions for improving the  logbooks responsiviness.  Our logbook was started 31 July 01.  Since that  time we have went from 1 logbook to 4 logbooks.  Logbook 1 having 2651        Re: logbook db size causing very slow response, posted by Etienne Van Caillie on Sat Jan 4 17:55:49 2003  > Was wondering if there were any tweaks/suggestions for improving the  > logbooks responsiviness.  Our logbook was started 31 July 01.  Since that  > time we have went from 1 logbook to 4 logbooks.  Logbook 1 having 2651           Re: logbook db size causing very slow response, posted by Stefan Ritt on Sat Jan 4 20:07:20 2003  > Another thing that seems to slow the site down, is the number of users in  > the elog notification list (those who've subscribed).  When you save a log  > entry, it takes around 30sec or longer for it to actually complete the        Re: logbook db size causing very slow response, posted by Stefan Ritt on Thu Jan 9 10:25:10 2003  > Was wondering if there were any tweaks/suggestions for improving the  > logbooks responsiviness.  Our logbook was started 31 July 01.  Since that  > time we have went from 1 logbook to 4 logbooks.  Logbook 1 having 2651        Re: logbook db size causing very slow response, posted by Stefan Ritt on Sat Jan 11 18:09:04 2003  > Was wondering if there were any tweaks/suggestions for improving the  > logbooks responsiviness.  Our logbook was started 31 July 01.  Since that  > time we have went from 1 logbook to 4 logbooks.  Logbook 1 having 2651    security in find option as a guest, posted by Etienne Van Caillie on Mon Jan 6 19:53:28 2003  if you are guest in the find option   select 'all logbook'       Re: security in find option as a guest, posted by Stefan Ritt on Tue Jan 7 09:39:29 2003  > if you are guest in the find option   >  > select 'all logbook'          Re: security in find option as a guest, posted by Etienne Van Caillie on Tue Jan 7 16:04:14 2003  > > if you are guest in the find option   > >  > > select 'all logbook'             Re: security in find option as a guest, posted by Stefan Ritt on Tue Jan 7 17:30:50 2003  > may be add a parameter >  > Restrict Search all logboog = 1 or 0                Re: security in find option as a guest, posted by Etienne Van Caillie on Fri Jan 10 15:10:53 2003  > > may be add a parameter > >  > > Restrict Search all logboog = 1 or 0   New directory scheme from version 2.2.5 on, posted by Stefan Ritt on Tue Jan 7 17:48:25 2003  Starting from version 2.2.5 on, an new directory scheme has been  implemented. The idea is to separate the config file from the theme/icon  and the logbook directories. This can now be achieved by specifying the    email notification to a specific adress, posted by Etienne Van Caillie on Sun Dec 22 16:49:20 2002  I have some problem with email notification for some logbooks I would like to notify only to specific adress I try       Re: email notification to a specific adress, posted by Stefan Ritt on Sat Jan 4 20:16:32 2003  > I have some problem with email notification > for some logbooks I would like to notify only to specific adress > I try   expand flag, posted by tony summerfelt on Thu Dec 12 19:02:03 2002  i have expand flag set to 0 but it doesn't seem to be working... i can expand and collapse via the links, or if i make sure the url includes it.       Re: expand flag, posted by Stefan Ritt on Thu Dec 12 20:26:03 2002  > i have expand flag set to 0 but it doesn't seem to be working... It workes here flawlessly. Can you double check the spelling etc. If           Re: expand flag, posted by Stefan Ritt on Thu Dec 19 15:14:34 2002  > > i have expand flag set to 0 but it doesn't seem to be working... >  > It workes here flawlessly. Can you double check the spelling etc. If              Re: expand flag, posted by tony summerfelt on Thu Dec 19 16:16:42 2002  > I checked your elogd.cfg: The flag is called "Expand default" not "Expand" as  > you had it. With "Expand default = 0" it works fine. Just RTFM...   two features, posted by tony summerfelt on Fri Nov 29 17:00:36 2002  unless i missed these in the docs some place: 1) a threaded display but collapsed threads unstead of all replies showing       Re: two features, posted by Stefan Ritt on Thu Dec 12 14:16:22 2002  > unless i missed these in the docs some place: >  > 1) a threaded display but collapsed threads unstead of all replies showing          Re: two features, posted by tony summerfelt on Thu Dec 12 18:10:03 2002  > This feature has been added in Version 2.2.4 which has been released today.  > Use the "collase" button.   New "Quick filter" facility added, posted by Stefan Ritt on Thu Dec 12 14:12:41 2002  Starting from version 2.2.4 which has been released today, the  option "quick filter" has been added. A "quick filter" is a drop down box  on the message display page. By selecting a value from the drop down box,    Show all common attributes, posted by Stephan Egli on Mon Nov 25 18:10:04 2002  In the "find" command, when searching over all logbooks, it would be nice to see ALL attributes, which are common for all logbooks (e.g. typically the author name), not just       Re: Show all common attributes, posted by Stefan Ritt on Tue Nov 26 08:59:28 2002  > In the "find" command, when searching over all logbooks, it > would be nice to see ALL attributes, which are common for all > logbooks (e.g. typically the author name), not just          Re: Show all common attributes, posted by Stephan Egli on Tue Nov 26 18:04:43 2002  > > In the "find" command, when searching over all logbooks, it > > would be nice to see ALL attributes, which are common for all > > logbooks (e.g. typically the author name), not just             Re: Show all common attributes, posted by Stefan Ritt on Thu Nov 28 10:01:47 2002  > > > In the "find" command, when searching over all logbooks, it > > > would be nice to see ALL attributes, which are common for all > > > logbooks (e.g. typically the author name), not just   upgrading, posted by tony summerfelt on Wed Nov 20 17:55:07 2002  this is happened before, and it just happened upgrading from 2.2.2 to 2.2.3 the link at the bottom of the page shows a previously installed version.       Re: upgrading, posted by Stefan Ritt on Wed Nov 20 20:07:58 2002  > this is happened before, and it just happened upgrading from 2.2.2 to 2.2.3 >  > the link at the bottom of the page shows a previously installed version.          Re: upgrading, posted by tony summerfelt on Thu Nov 21 18:22:58 2002  > Of course you have to stop the old elogd program and start the new one. Have  > you done that?             Re: upgrading, posted by Stefan Ritt on Fri Nov 22 09:11:27 2002  > > Of course you have to stop the old elogd program and start the new one.  Have  > > you done that?                Re: upgrading, posted by Stefan Ritt on Mon Nov 25 09:05:06 2002  Ooops, I just realized that the Windows 2.2.3 distribution contained the old  (2.2.2) executable for elogd.exe. I apologize for that. I have updated the  elog223.exe distribution just now, so please download it again in order to                    Re: upgrading, posted by tony summerfelt on Wed Nov 27 07:22:07 2002  > Ooops, I just realized that the Windows 2.2.3 distribution contained the old  > (2.2.2) executable for elogd.exe. I apologize for that. I have updated the    Input text gets lost, posted by egli on Sat Nov 23 09:20:57 2002  Typing in a text for a new entry results in an error message, whenever one forgets to fill in mandatory attributes (as it should happen !). However after using the back button in this case (Using netscape 4.79) I made the   Show all entries made by ME ?, posted by Willem Koster on Thu Nov 14 12:16:49 2002  In my bottom.html file I have: <A Href="host/Forum/?mode=summary&reverse=1&npp=10&Status=Open">Open</A>        Re: Show all entries made by ME ?, posted by Stefan Ritt on Wed Nov 20 14:53:07 2002  > In my bottom.html file I have: >  > <A Href="host/Forum/?mode=summary&reverse=1&npp=10&Status=Open">Open</A>    elog reaction is very slow, posted by Philipp Rueckl on Wed Oct 30 19:46:56 2002  Hello, I am running Elog V2.1.3 on Solaris 8 and I was very pleased about this  tool.But now I have a problem: Sometimes it takes a lot of time submitting        Re: elog reaction is very slow, posted by Stefan Ritt on Mon Nov 4 15:10:24 2002  > Hello, > I am running Elog V2.1.3 on Solaris 8 and I was very pleased about this  > tool.But now I have a problem: Sometimes it takes a lot of time submitting           Re: elog reaction is very slow, posted by Willem Koster on Tue Nov 19 14:11:11 2002  We had the same problem here. What worked in our case was: Traffic to port 113 (identd) was blocked. Because the server didn't give any   Compiling elog-2.2.2 in Solaris 8, posted by Willem Koster on Thu Nov 14 12:04:09 2002  On our:    SunOS operator 5.8 Generic_108528-13 sun4u sparc SUNW,Ultra-5_10       Re: Compiling elog-2.2.2 in Solaris 8, posted by Willem Koster on Thu Nov 14 13:00:24 2002  From: http://elog.sourceforge.net/ Solaris   How To: add charset support via META ?, posted by Max Goncharenko on Wed Nov 6 13:34:49 2002  Encoding  problem: How to make ELOG generate HTTP pages with        Re: How To: add charset support via META ?, posted by Stefan Ritt on Wed Nov 6 14:46:12 2002  > Encoding  problem: >  > How to make ELOG generate HTTP pages with    New ELOG entry, posted by Willem Koster on Fri Nov 1 13:39:41 2002  When I make a new entry I get an email with     subject: New ELOG entry       Re: New ELOG entry, posted by Stefan Ritt on Mon Nov 4 15:08:11 2002  > When I make a new entry I get an email with  >  >    subject: New ELOG entry   wrapping of text in edit field, posted by Willem Koster on Fri Nov 1 13:33:01 2002  I noticed a long url got hard-wrapped when I entered a long one, I patched  the source code. I don't know if this was done intentionally, otherwise you  might want to change this also.       Re: wrapping of text in edit field, posted by Stefan Ritt on Mon Nov 4 14:55:10 2002  > I noticed a long url got hard-wrapped when I entered a long one, I patched  > the source code. I don't know if this was done intentionally, otherwise you  > might want to change this also.   how do you specify user name/passwd for the outbound smpt server, posted by eric wooten on Thu Oct 31 10:42:02 2002  if you have a site that requires authentication to the smtp server, how do  you specify this info in elog???       Re: how do you specify user name/passwd for the outbound smpt server, posted by Stefan Ritt on Mon Nov 4 14:00:24 2002  > if you have a site that requires authentication to the smtp server, how do  > you specify this info in elog??? >    Increase attachment file size for elog command line client, posted by Kevin Ellwood on Fri Sep 27 19:17:58 2002  Hi, I am having trouble modifying the elog client to allow larger attachment.  I       Re: Increase attachment file size for elog command line client, posted by Stefan Ritt on Mon Oct 14 10:28:48 2002  > Hi, >  > I am having trouble modifying the elog client to allow larger    New elogd.cfg for this site, posted by Stefan Ritt on Tue Sep 24 17:24:46 2002  Since the way ELOG works has changed in version 2.2.0 (show message list as  default view), the configuration file elgod.cfg for this site became  slightly simpler. The usual "Start page = ?cmd=Search" is not necessary any    weird date bug, posted by tony summerfelt on Tue Sep 17 17:23:35 2002  i have a forum with one message. the forums is displayed with the search mode set to threaded. the list shows this:        Re: weird date bug, posted by Stefan Ritt on Tue Sep 24 17:05:43 2002  > i have a forum with one message. the forums is displayed with the search  mode set to threaded. >           Re: weird date bug, posted by tony summerfelt on Tue Sep 24 17:24:38 2002  > I vaguely remember there was once a problem with that date. So can you please  > try again with a recent version of ELOG?   Icons for sorted entries, posted by Stefan Siegel on Wed Sep 11 18:44:51 2002  Hi, when do a search and then sorting the outcome of the search via clicking on        Re: Icons for sorted entries, posted by Stefan Ritt on Tue Sep 24 17:03:29 2002  > when do a search and then sorting the outcome of the search via clicking on  > an attribute (to sort it in descending or vice versa order) there should an  > icon be displayed (up.gif or down.gif). But the icons could not be found    Error with not existing user name, posted by Stefan Siegel on Wed Sep 11 18:37:27 2002  Hi, Elogd v. 2.1.2:       Re: Error with not existing user name, posted by Stefan Ritt on Tue Sep 24 16:59:11 2002  > Elogd v. 2.1.2: >  > When trying to acces a password protected Log (global password file) with a    Displaying attributes when creating a new entry, posted by eric wooten on Fri Aug 16 18:30:03 2002  Say I have an attribute called OS Instead of having a drop down box is there a way to use either the radio        Re: Displaying attributes when creating a new entry, posted by Stefan Ritt on Tue Sep 10 17:29:27 2002  > Say I have an attribute called OS >  > Instead of having a drop down box is there a way to use either the radio    specify attribute type as a number or date format?, posted by eric wooten on Fri Aug 16 15:00:21 2002  any way to specify that a particular option be in a date format or even  the ability to specifiy the category must be of a particular format: -must be a number        Re: specify attribute type as a number or date format?, posted by Stefan Ritt on Tue Sep 10 17:28:21 2002  > any way to specify that a particular option be in a date format or even  > the ability to specifiy the category must be of a particular format: > -must be a number    Password reset option, posted by eric wooten on Fri Aug 16 12:58:15 2002  Some options for the password setting: The ability that if admin creates a temporary password for the user, force  the user to change the password once logged in.       Re: Password reset option, posted by Stefan Ritt on Tue Sep 10 17:26:21 2002  > Some options for the password setting: > The ability that if admin creates a temporary password for the user, force  > the user to change the password once logged in.   Author & pwd case sensitive ?, posted by eric wooten on Fri Aug 16 12:52:53 2002  Is it possible to make the author and pwd check case in-sensitive??  I  noticed that unless you type your userid and password in the same case each  time, the system doesn't recognize your or thinks the info is invalid.       Re: Author & pwd case sensitive ?, posted by Stefan Ritt on Tue Sep 10 17:24:25 2002  > Is it possible to make the author and pwd check case in-sensitive??  I  > noticed that unless you type your userid and password in the same case each  > time, the system doesn't recognize your or thinks the info is invalid.   documentation fro elconv, posted by Stefan Siegel on Fri Aug 16 11:21:20 2002  Hi, is there a documentation for the elconv tool available?       Re: documentation fro elconv, posted by Stefan Ritt on Tue Sep 10 17:22:17 2002  > Hi, >  > is there a documentation for the elconv tool available?   Problem with konqueror and pulldown menu (in config menu), posted by Stefan Siegel on Fri Aug 16 10:14:19 2002  Hi , currently I am running Elog 2.1.1; when using a konqueror browser (ver.        Re: Problem with konqueror and pulldown menu (in config menu), posted by Stefan Ritt on Tue Sep 10 17:15:15 2002  > Hi , >  > currently I am running Elog 2.1.1; when using a konqueror browser (ver.    logical search operators, posted by Marcel Pils on Sun Aug 18 23:18:00 2002  It is posible to use logical search operators like "and" and "or" ? Which Operators can i use how do i so ?       Re: logical search operators, posted by Stefan Ritt on Tue Sep 10 17:13:32 2002  > It is posible to use logical search operators like "and" and "or" ? >  > Which Operators can i use how do i so ?   Multiple eLogs, posted by Tom Vilberg on Wed Aug 28 20:59:05 2002  I have two different groups who want elogs for all of their members. How do I set elog up so group 1 uses port 8082 and group 2 uses 8083 (and they don't see each other's messages in the initial "menu" screen.       Re: Multiple eLogs, posted by Stefan Ritt on Tue Sep 10 17:09:59 2002  > I have two different groups who want elogs for all of their members. How do > I set elog up so group 1 uses port 8082 and group 2 uses 8083 (and they > don't see each other's messages in the initial "menu" screen.   self - registering - How It Works - or at least how i've gotten it to work, posted by eric wooten on Fri Aug 16 22:56:44 2002  Create a blank text file (called mine passwd.txt) Place the text file somewhere in the elog directory structure (I placed mine in c:\elog\passwd.txt because i wanted to use it globally    Just wanted to say great job..., posted by eric wooten on Fri Aug 16 10:28:31 2002  Stefan, Just wanted to say, great job on this logbook.  I've been with you from the    self register enhancmenets, posted by eric wooten on Fri Aug 16 09:06:17 2002  Couple Wish List Items for the Self Register: -allow the user to pick which type of log entries (which categories, etc)        Re: self register enhancmenets, posted by eric wooten on Fri Aug 16 10:26:14 2002  Also having the ability to subscribe to notifications for one or more  logbooks (if access is given - along with the ability to choose which  categories, etc notifications are sent.   password file and self register, posted by eric wooten on Fri Aug 16 09:03:24 2002  I too am having problems getting the self register to work.   Can you  attach a sample password file??   When I click the New user, nothing  happens.  I do not get the screen that shows on this demo site.       Re: password file and self register, posted by eric wooten on Fri Aug 16 09:32:07 2002  Ok I got the password file to finally work.  Once I created a blank  passwd.txt I get the self register page to appear and create the account.     logging, posted by tony summerfelt on Thu Aug 15 20:21:17 2002  is it possible to add ip information into the logging? that's something i was working on already but never finished...now that there's logging already added :)   elogd.cfg for this demo site, posted by Stefan Ritt on Wed Aug 14 00:04:44 2002  Just since some people asked for: Here is the elogd.cfg for this demo  logbooks:       Re: elogd.cfg for this demo site, posted by sam smith on Wed Aug 14 00:22:57 2002  Thank you very much! > Just since some people asked for: Here is the elogd.cfg for this demo        Re: elogd.cfg for this demo site, posted by tony summerfelt on Wed Aug 14 19:45:56 2002  > Just since some people asked for: Here is the elogd.cfg for this demo  quite a few things i wanted to do were in that config :)   Error while trying to change password (elogd 2.1.0), posted by Stefan Siegel on Mon Aug 12 11:01:51 2002  When logging in with a username and password; then trying to logout or  change password one gets the following message:       Re: Error while trying to change password (elogd 2.1.0), posted by Stefan Ritt on Mon Aug 12 17:04:30 2002  > When logging in with a username and password; then trying to logout or  > change password one gets the following message: >           Re: Error while trying to change password (elogd 2.1.0), posted by Stefan Siegel on Wed Aug 14 13:44:12 2002  > > When logging in with a username and password; then trying to logout or  > > change password one gets the following message: > >    self-registration, posted by tony summerfelt on Fri Aug 9 21:10:20 2002  i seem to be unable to find a clear explanation of how to enable self-registration in the docs. just to be sure i grepped the doc directory, but the two references to it were in the changelog and the faq.       Re: self-registration, posted by Stefan Ritt on Sat Aug 10 13:00:26 2002  > i seem to be unable to find a clear explanation of how to enable self- registration in the docs. >           Re: self-registration, posted by tony summerfelt on Sun Aug 11 18:45:08 2002  > Sorry, I haven't fully documented it yet, will do on Monday next week. For  > now, see the configuration file for this forum which is attached.   Edit an existing message overwrites attributes with preset values, posted by Stefan Siegel on Fri Aug 9 12:40:23 2002  Hello, Is there a possibility to prevent elog to overwrite attribute values when        Re: Edit an existing message overwrites attributes with preset values, posted by Stefan Ritt on Fri Aug 9 12:50:58 2002  > Is there a possibility to prevent elog to overwrite attribute values when  > editing an old message? The old values are overwriten with the preset  > options for that attribute.           Re: Edit an existing message overwrites attributes with preset values, posted by Stefan Siegel on Fri Aug 9 13:04:58 2002  > > Is there a possibility to prevent elog to overwrite attribute values when  > > editing an old message? The old values are overwriten with the preset  > > options for that attribute.              Re: Edit an existing message overwrites attributes with preset values, posted by Stefan Ritt on Fri Aug 9 14:59:17 2002  > Ok, but is there a possibility to preserve the fields of the old message,  but  > still be able to edit it. This would be a nice feature in the case of an    problem with required attributes, posted by Stefan Siegel on Wed Aug 7 15:43:28 2002  When an entry is submitted with an required attribute missing one gets to  the resubmit page. When you the click your browsers back button all  previously filled attribute field are blank.       Re: problem with required attributes, posted by Stefan Ritt on Wed Aug 7 15:51:18 2002  > When an entry is submitted with an required attribute missing one gets to  > the resubmit page. When you the click your browsers back button all  > previously filled attribute field are blank.   Compiling elog 2.0.4 on Solaris, posted by Christian Korschan on Mon Jul 8 21:01:00 2002  Comiling elogd 2.0.4 under Solaris obviously fails with gcc  -o elog elog.c -lsocket -lnsl       Re: Compiling elog 2.0.4 on Solaris, posted by Stefan Ritt on Tue Jul 9 09:33:47 2002  > Comiling elogd 2.0.4 under Solaris obviously fails with >  > gcc  -o elog elog.c -lsocket -lnsl          Re: Compiling elog 2.0.4 on Solaris, posted by Christian Korschan on Wed Jul 24 17:29:00 2002  > > Comiling elogd 2.0.4 under Solaris obviously fails with > >  > > gcc  -o elog elog.c -lsocket -lnsl             Re: Compiling elog 2.0.4 on Solaris, posted by Joe Nall on Sat Aug 3 17:35:39 2002  > > > Comiling elogd 2.0.4 under Solaris obviously fails with > > >  > > > gcc  -o elog elog.c -lsocket -lnsl                Re: Compiling elog 2.0.4 on Solaris, posted by Stefan Ritt on Tue Aug 6 16:14:42 2002  > > > > Comiling elogd 2.0.4 under Solaris obviously fails with > > > >  > > > > gcc  -o elog elog.c -lsocket -lnsl   New beta version of ELOG, testing required, posted by Stefan Ritt on Tue Aug 6 15:52:09 2002  Hi, I added many features to ELOG recently, but before making a new release, I    Scroll box for attributes, posted by mo on Tue Jul 30 17:33:24 2002  Hello,    If you have the text box turned off so you only enter attributes, is it  possible to have a couple of attributes that have small scroll through text        Re: Scroll box for attributes, posted by Stefan Ritt on Tue Jul 30 17:54:53 2002  > Hello, >    If you have the text box turned off so you only enter attributes, is it  > possible to have a couple of attributes that have small scroll through text    elogd.cfg cannot be saved, posted by Mo on Thu Jul 25 19:17:13 2002  Hello,     In the newest version of eLog, I was having trouble saving the  configurations once I change them through the web interface.  I can change        Re: elogd.cfg cannot be saved, posted by Stefan Ritt on Fri Jul 26 10:47:21 2002  >     In the newest version of eLog, I was having trouble saving the  > configurations once I change them through the web interface.     elog-2.0.5 core dumps under Solaris, posted by Christian Korschan on Wed Jul 24 16:44:44 2002  Just compiled elog-2.0.5 under Solaris 8 and 9  without any warnings/errors but the elogd binary just core dumps:       Re: elog-2.0.5 core dumps under Solaris, posted by Christian Korschan on Wed Jul 24 17:24:31 2002  > Just compiled elog-2.0.5 under Solaris 8 and 9  without any warnings/errors > but the elogd binary just core dumps: >    Improved display speed, posted by Stefan Ritt on Tue Jul 23 15:59:55 2002  Version 2.0.5 of elog has been released today. Among various bugfixes, the  display speed for threaded lists has been improved significantly. Display  all messages of this forum and press the reload button to see the    change the Email From address used when sending notifications, posted by WootenE on Tue Jul 16 15:19:08 2002  Is there a way to change the From address used when sending notifications  from ELOG?   I was hoping there might be another attribute that would go  along with the smtp host section.       Re: change the Email From address used when sending notifications, posted by Stefan Ritt on Tue Jul 23 09:16:01 2002  > Is there a way to change the From address used when sending notifications  > from ELOG?   I was hoping there might be another attribute that would go  > along with the smtp host section.   Port specification with -p fails under RedHat Linux (2.0.4-1), posted by Joeri Mastop on Mon Jul 15 14:09:30 2002  Hello, I noticed a strange behaviour with Elog 2.0.4 (i386 RPM) in Linux (RH 7.2).        Re: Port specification with -p fails (SOLVED, more or less), posted by Joeri Mastop on Mon Jul 15 15:05:22 2002  > Anyone seen similar problems?  Probably not if you read the config file, 'cause I didn't. Shame on me...          Re: Port specification with -p fails (SOLVED, more or less), posted by Stefan Ritt on Tue Jul 23 09:12:14 2002  > > Anyone seen similar problems?  > Probably not if you read the config file, 'cause I didn't. Shame on me... >    Reverse sort, threaded display fails when there is only 1 entry in logbook, posted by Ravi Pappu on Sun Jul 14 15:15:19 2002  This is not a serious bug...but when the global settings are as follows       Re: Reverse sort, threaded display fails when there is only 1 entry in logbook, posted by Stefan Ritt on Wed Jul 17 14:53:18 2002  >  >  > This is not a serious bug...but when the global settings are as follows   last x link TEXT, posted by H. Scheit on Fri Jul 12 10:18:21 2002  The last x link TEXT now shows up like this       Re: last x link TEXT, posted by Stefan Ritt on Fri Jul 12 10:26:40 2002  > The last x link TEXT now shows up like this >  >    'Last 20 entries?mode=threaded'   entry number not updated properly after deleting, posted by mo on Thu Jul 11 15:59:17 2002  Hello,     If you delete a message from the middle of a logbook that contains a  bunch of messages, the message numbers do not get updated properly.  For        Re: entry number not updated properly after deleting, posted by Stefan Ritt on Thu Jul 11 16:03:56 2002  > Hello, >     If you delete a message from the middle of a logbook that contains a  > bunch of messages, the message numbers do not get updated properly.  For    elog submit without user and password, posted by H. Scheit on Mon Jul 8 19:42:13 2002  With elog it is possible to submit messages to a password protected logbook without specifying the -u option.  I.e. NO PASSWORD is necessary to submit a message.  I assume it is related to the problem       Re: elog submit without user and password, posted by Stefan Ritt on Tue Jul 9 10:58:18 2002  > With elog it is possible to submit messages to a password protected > logbook without specifying the -u option.  I.e. NO PASSWORD is > necessary to submit a message.  I assume it is related to the problem          Re: elog submit without user and password, posted by H. Scheit on Tue Jul 9 15:28:33 2002  > > With elog it is possible to submit messages to a password protected > > logbook without specifying the -u option.  I.e. NO PASSWORD is > > necessary to submit a message.  I assume it is related to the problem             Re: elog submit without user and password, posted by Stefan Ritt on Wed Jul 10 08:53:21 2002  > I guess it cannot and doesn't have to be 100% save.  Maybe if the web > interface is used for a new message a long random number (let's call > it newID) can be included, which elog remembers for some time (say 1   problem saving elogd.cfg, posted by Mo on Mon Jul 8 17:18:05 2002  In version 2.0.4 of eLog I was having some problems with saving my  configuration file once I edited it on the web using the config. command. I keep getting the message "Cannot open file %s: elogd.cfg".  I made sure        Re: problem saving elogd.cfg, posted by Stefan Ritt on Tue Jul 9 09:25:41 2002  > In version 2.0.4 of eLog I was having some problems with saving my  > configuration file once I edited it on the web using the config. command. > I keep getting the message "Cannot open file %s: elogd.cfg".  I made sure    Where can I get more information on the config file, posted by Scott Fenstermacher on Mon Jul 8 22:50:16 2002  Where can I get more information about the config and themes file. I downloaded the latest version (2.0.4) and the config file docs seem out of date. I would like to get the icons working as well as getting the email to       Re: Where can I get more information on the config file, posted by Stefan Ritt on Tue Jul 9 09:18:05 2002  > Where can I get more information about the config and themes file. I > downloaded the latest version (2.0.4) and the config file docs seem out of > date. I would like to get the icons working as well as getting the email    reverse sort and threaded mode does not display first entry, posted by Heiko Scheit on Thu Jul 4 17:05:03 2002  When the option 'Reverse sort = 1' is used then the first entry is not displayed (ID=1) when threaded mode is requested.       Re: reverse sort and threaded mode does not display first entry, posted by Stefan Ritt on Mon Jul 8 10:45:37 2002  > When the option 'Reverse sort = 1' is used then the first entry > is not displayed (ID=1) when threaded mode is requested. >    elog submit problem, posted by Heiko Scheit on Thu Jul 4 16:52:59 2002  If a message is submitted via the elog command then the reply string '> ' is only inserted in the first line if a reply is made. This message was submitted with the following commandline: elog -v -h midas.psi.ch -p 80 -s elogdemo -l Forum -a "Icon=icon4.gif" -a "Author=Heiko Scheit"  -a "Author Email=h.scheit@mpi-hd.mpg.de" -a "Subject=elog       Re: elog submit problem, posted by Stefan Ritt on Mon Jul 8 10:44:08 2002  > If a message is submitted via the elog command then the reply string '> '  is only inserted in the first line if a reply is made. > This message was submitted with the following commandline:   exit status of elog, posted by Heiko Scheit on Thu Jul 4 17:09:09 2002  The exit status of elog is always 1.  It should be zero for a successful submission.       Re: exit status of elog, posted by Stefan Ritt on Mon Jul 8 10:42:38 2002  > The exit status of elog is always 1.  It should be zero for > a successful submission.   possible to modify link in email notification, posted by Stefan Siegel on Wed Jul 3 18:36:28 2002  Hello, I have a question concerning the following situation:       Re: possible to modify link in email notification, posted by Stefan Ritt on Thu Jul 4 09:23:50 2002  Having the URL link to a different logbook is right now not possible. But  what about setting up a single logbook with a write password. Everybody can  access it for reading, but only these people who know the write password    Options <attribute> = List????, posted by Mo on Mon Jul 1 13:56:12 2002  Hello,     Is it possible to have a drop down list with commas in the options.   For instance, if you want to have a attribute "CityState" you would        Re: Options <attribute> = List????, posted by Stefan Ritt on Tue Jul 2 09:41:57 2002  > Hello, >     Is it possible to have a drop down list with commas in the options.   > For instance, if you want to have a attribute "CityState" you would

Goto page 1, 2, 3 ... 235, 236, 237   Next

ELOG V3.1.5-3fb85fa6